| 227690d | Hans Verkuil | 12 June 2011, 09:36:41 UTC | [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 07 July 2011, 18:02:07 UTC |
| 9bf0ef0 | Hans Verkuil | 13 June 2011, 12:21:56 UTC | [media] tuner-core: fix tuner_resume: use t->mode instead of t->type set_mode is called with t->type, which is the tuner type. Instead, use t->mode which is the actual tuner mode (i.e. radio vs tv). Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 07 July 2011, 18:00:57 UTC |
| 4e4a31f | Hans Verkuil | 14 June 2011, 06:56:09 UTC | [media] tuner-core: fix s_std and s_tuner Both s_std and s_tuner are broken because set_mode_freq is called before the new std (for s_std) and audmode (for s_tuner) are set. This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner first calls set_mode, and if that returns 0 (i.e. the mode is supported) then they set t->std/t->audmode and call set_freq. This fixes a bug where changing std or audmode would actually change it to the previous value. Discovered while testing analog TV standards for cx18 with a tda18271 tuner. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 07 July 2011, 18:00:10 UTC |
| 98c32bc | Jarod Wilson | 23 June 2011, 13:40:55 UTC | [media] rc: call input_sync after scancode reports Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2, evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. If we get a repeat or a scancode we don't have a mapping for, we never call input_sync, and thus those events don't get reported in a timely fashion. For example, take an mceusb transceiver with a default rc6 keymap. Press buttons on an rc5 remote while monitoring with ir-keytable, and you'll see nothing. Now press a button on the rc6 remote matching the keymap. You'll suddenly get the rc5 key scancodes, the rc6 scancode and the rc6 key spit out all at the same time. Pressing and holding a button on a remote we do have a keymap for also works rather unreliably right now, due to repeat events also happening without a call to input_sync (we bail from ir_do_keydown before getting to the point where it calls input_sync). Easy fix though, just add two strategically placed input_sync calls right after our input_event calls for EV_MSC, and all is well again. Technically, we probably should have been doing this all along, its just that it never caused any functional difference until the referenced change went into the input layer. input_sync once per IR signal. There was another hidden bug in the code where we were calling input_report_key using last_keycode instead of our just discovered keycode, which manifested with the reordering of calling input_report_key and setting last_keycode. Reported-by: Stephan Raue <sraue@openelec.tv> CC: Stephan Raue <sraue@openelec.tv> CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Jeff Brown <jeffbrown@android.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:34:45 UTC |
| 372b424 | Jarod Wilson | 20 June 2011, 03:07:13 UTC | [media] imon: allow either proto on unknown 0xffdc While 0xffdc devices have their IR protocol hard-coded into the firmware of the device, we have no known way of telling what it is if we don't have the device's config byte already in the driver. Unknown devices default to the imon native protocol, but might actually be rc6, so we should set the driver up such that the user can load the rc6 keytable from userspace and still have a working device ahead of its config byte being added to the driver. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:34:01 UTC |
| 842071c | Jarod Wilson | 20 June 2011, 03:04:05 UTC | [media] imon: auto-config ffdc 7e device Another device with the 0xffdc device id, this one with 0x7e in the config byte. Its an iMON VFD + RC6 IR, in a CoolerMaster 260 case. Reported-by: Filip Streibl <filip@streibl.cz> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:33:38 UTC |
| 9800b5b | Jarod Wilson | 16 June 2011, 20:30:48 UTC | [media] saa7134: fix raw IR timeout value The comment says "wait 15ms", but the code says jiffies_to_msecs(15) instead of msecs_to_jiffies(15). Fix that. Tested, works fine with both rc5 and rc6 decode, in-kernel and via lirc userspace, with an HVR-1150. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:33:20 UTC |
| 3f5c4c7 | Jarod Wilson | 16 June 2011, 19:18:37 UTC | [media] rc: fix ghost keypresses with certain hw With hardware that has to use ir_raw_event_store_edge to collect IR sample durations, we were not doing an event reset unless IR_MAX_DURATION had passed. That's around 4 seconds. So if someone presses up, then down, with less than 4 seconds in between, they'd get the initial up, then up and down upon pressing down. To fix this, I've lowered the "send a reset event" logic's threshold to the input device's REP_DELAY (defaults to 500ms), and with an saa7134-based GPIO-driven IR receiver in a Hauppauge HVR-1150, I get *much* better behavior out of the remote now. Special thanks to Devin for providing the hardware to investigate this issue. CC: stable@kernel.org CC: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:33:01 UTC |
| c4b0afe | Jarod Wilson | 13 June 2011, 18:32:26 UTC | [media] [staging] lirc_serial: allocate irq at init time There's really no good reason not to just grab the desired IRQ at driver init time, instead of every time the lirc device node is accessed. This also improves the speed and reliability with which a serial transmitter can operate, as back-to-back transmission attempts (i.e., channel change to a multi-digit channel) don't have to spend time acquiring and then releasing the IRQ for every digit, sometimes multiple times, if lircd has been told to use the min_repeat parameter. CC: devel@driverdev.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:32:45 UTC |
| 6a8c97a | Jarod Wilson | 08 June 2011, 21:56:56 UTC | [media] lirc_zilog: fix spinning rx thread We were calling schedule_timeout with the rx thread's task state still at TASK_RUNNING, which it shouldn't be. Make sure we call set_current_state(TASK_INTERRUPTIBLE) *before* schedule_timeout, and we're all good here. I believe this problem was mistakenly introduced in commit 5bd6b0464b68d429bc8a3fe6595d19c39dfc4d95, and I'm not sure how I missed it before, as I swear I tested the patchset that was included in, but alas, stuff happens... Acked-by: Andy Walls <awalls@md.metrocast.net> CC: stable@kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:32:27 UTC |
| 1ba9268 | Jarod Wilson | 08 June 2011, 18:00:01 UTC | [media] keymaps: fix table for pinnacle pctv hd devices Both consumers of RC_MAP_PINNACLE_PCTV_HD send along full RC-5 scancodes, so this update makes this keymap actually *have* full scancodes, heisted from rc-dib0700-rc5.c. This should fix out of the box remote functionality for the Pinnacle PCTV HD 800i (cx88 pci card) and PCTV HD Pro 801e (em28xx usb stick). CC: stable@kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:31:54 UTC |
| 35d136c | Jarod Wilson | 07 June 2011, 21:45:17 UTC | [media] ite-cir: 8709 needs to use pnp resource 2 Thanks to the intrepid testing and debugging of Matthijs van Drunen, it was uncovered that at least some variants of the ITE8709 need to use pnp resource 2, rather than 0, for things to function properly. Resource 0 has a length of only 1, and if you try to bypass the pnp_port_len check and use it anyway (with either a length of 1 or 2), the system in question's trackpad ceased to function. The circa lirc 0.8.7 lirc_ite8709 driver used resource 2, but the value was (amusingly) changed to 0 by way of a patch from ITE themselves, so I don't know if there may be variants where 0 actually *is* correct, but at least in this case and in the original lirc_ite8709 driver author's case, it sure looks like 2 is the right value. This fix should probably be applied to all stable kernels with the ite-cir driver, lest we nuke more people's trackpads. Tested-by: Matthijs van Drunen CC: Juan Jesús García de Soria <skandalfo@gmail.com> CC: stable@kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 19:31:38 UTC |
| 258c056 | Andre Bartke | 10 June 2011, 10:57:54 UTC | [media] V4L: mx1-camera: fix uninitialized variable mx1_camera_add_device() can return an uninitialized value of ret. Signed-off-by: Andre Bartke <andre.bartke@gmail.com> [g.liakhovetski@gmx.de: modified the fix to remove "ret" completely] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 18:51:34 UTC |
| 383e4f6 | Vaibhav Hiremath | 14 April 2011, 16:42:34 UTC | [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation The usecase where, user allocates small size of buffer through bootargs (video1_bufsize/video2_bufsize) and later from application tries to set the format which requires larger buffer size, driver doesn't check for insufficient buffer size and allows application to map extra buffer. This leads to kernel crash, when user application tries to access memory beyond the allocation size. Added check in both mmap and reqbuf call back function, and return error if the size of the buffer allocated by user through bootargs is less than the S_FMT size. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 18:47:53 UTC |
| 8f3a307 | Vaibhav Hiremath | 16 June 2011, 18:32:07 UTC | [media] OMAP_VOUT: Change hardcoded device node number to -1 With addition of media-controller framework, now we have various device nodes (/dev/videoX) getting created, so hardcoding minor number in video_register_device() is not recommended. So let V4L2 framework choose free minor number for the device. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 18:46:46 UTC |
| e8bb10b | Vladimir Pantelic | 26 April 2011, 07:28:11 UTC | [media] OMAP_VOUTLIB: Fix wrong resizer calculation The omap_vout_new_crop() function has possible bug, uses uninitialized variable "crop.width/height" which is actually output of the function. Instead we should be using "try_crop.width/height" to calculate the resizer value. Signed-off-by: Vladimir Pantelic <vladoman@gmail.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 18:46:24 UTC |
| aa122d4 | Sjoerd Simons | 30 May 2011, 18:02:00 UTC | [media] uvcvideo: Disable the queue when failing to start When failing to start the camera we should disable the queue again, to rollback into the same initial state. Otherwise re-trying will always hit -EBUSY Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 02:19:16 UTC |
| 8ca2c80 | Sjoerd Simons | 24 May 2011, 15:22:03 UTC | [media] uvcvideo: Remove buffers from the queues when freeing When freeing memory for the video buffers also remove them from the irq & main queues. This fixes an oops when doing the following: open ("/dev/video", ..) VIDIOC_REQBUFS VIDIOC_QBUF VIDIOC_REQBUFS close () As the second VIDIOC_REQBUFS will cause the list entries of the buffers to be cleared while they still hang around on the main and irc queues Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 02:18:52 UTC |
| a96aa53 | Laurent Pinchart | 28 June 2011, 21:17:48 UTC | [media] uvcvideo: Ignore entities for terminals with no supported format If a streaming interface has no supported format, the driver won't create a video device for the associated terminal. Fix an oops by ignoring that terminal when creating links between entities. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 02:18:13 UTC |
| c064b8e | Laurent Pinchart | 15 June 2011, 08:20:34 UTC | [media] v4l: Don't access media entity after is has been destroyed Entities associated with video device nodes are unregistered in video_unregister_device(). This destroys the entity even though it can still be accessed through open video device nodes. Move the media_device_unregister_entity() call from video_unregister_device() to v4l2_device_release() to ensure that the entity isn't unregistered until the last reference to the video device is released. Also remove the media_entity_get()/put() calls from v4l2-dev.c. Those functions were designed for subdevs, to avoid a parent module from being removed while still accessible through board code. They're not currently needed for video device nodes, and will oops when a hotpluggable device is disconnected during streaming, as media_entity_put() called in v4l2_device_release() tries to access entity->parent->dev->driver which is set to NULL when the device is disconnected. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 02:12:36 UTC |
| ca4186f | Ohad Ben-Cohen | 01 June 2011, 16:39:46 UTC | [media] media: omap3isp: fix a potential NULL deref Fix a potential NULL pointer dereference by skipping registration of external entities in case none are provided. This is useful at least when testing mere memory-to-memory scenarios. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 02:01:05 UTC |
| 66072d4 | Marek Szyprowski | 28 June 2011, 11:29:02 UTC | [media] media: vb2: fix allocation failure check __vb2_queue_alloc function returns the number of successfully allocated buffers. There is no point in checking if the returned value is negative. If this function returns 0, videobuf2 should just return -ENOMEM to userspace, because no driver can work without memory buffers. Reported-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 01:33:47 UTC |
| afdea8b | Marek Szyprowski | 10 June 2011, 11:58:42 UTC | [media] media: vb2: reset queued_count value during queue reinitialization queued_count variable was left untouched during the queue reinitialization in __vb2_queue_cancel, what might lead to mismatch between the real number of queued buffers and queued_count variable. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 01:32:58 UTC |
| bf7b73e | Marek Szyprowski | 08 June 2011, 09:15:05 UTC | [media] Revert "[media] v4l2: vb2: one more fix for REQBUFS()" This reverts commit 31901a078af29c33c736dcbf815656920e904632. Queue should be reinitialized on each REQBUFS() call even if the memory access method and buffer count have not been changed. The user might have changed the format and if we go the short path introduced in that commit, the memory buffer will not be reallocated to fit with new format. The previous patch was just over-engineered optimization, which just introduced a bug to videobuf2. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 01:32:28 UTC |
| a52a82f | Marek Szyprowski | 01 June 2011, 15:57:37 UTC | [media] media: vb2: add __GFP_NOWARN to dma-sg allocator Add __GFP_NOWARN parameter to videobuf2 dma-sg allocator to prevent kernel warning and stack dump if there is not enough memory available. Videobuf2 and drivers should correctly handle no memory case, so there is no need for stack dump and extensive log. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 July 2011, 01:31:53 UTC |
| 9a7b2d1 | Hans de Goede | 06 June 2011, 17:43:39 UTC | [media] pwc: better usb disconnect handling Unplugging a pwc cam while an app has the /dev/video# node open leads to an oops in pwc_video_close when the app closes the node, because the disconnect handler has free-ed the pdev struct pwc_video_close tries to use. Instead of adding some sort of bandaid for this. fix it properly using the v4l2 core's new(ish) behavior of keeping the v4l2_dev structure around until both unregister has been called, and all file handles referring to it have been closed: Embed the v4l2_dev structure in the pdev structure and define a v4l2 dev release callback releasing the pdev structure (and thus also the embedded v4l2 dev structure. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 21 June 2011, 16:31:12 UTC |
| e76e470 | Marek Szyprowski | 02 June 2011, 07:52:07 UTC | [media] MAINTAINERS: Add videobuf2 maintainers Add maintainers for the videobuf2 V4L2 driver framework. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 13:14:54 UTC |
| c307011 | HeungJun, Kim | 07 June 2011, 05:00:58 UTC | [media] m5mols: Use proper email address format Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:46:00 UTC |
| a6354d2 | HeungJun, Kim | 07 June 2011, 04:59:44 UTC | [media] m5mols: remove union in the m5mols_get_version(), and VERSION_SIZE Remove union version in the m5mols_get_version(), and read version information directly. Also remove VERSION_SIZE. Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:55 UTC |
| 57644f5 | HeungJun, Kim | 31 May 2011, 06:44:19 UTC | [media] m5mols: add m5mols_read_u8/u16/u32() according to I2C byte width For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width. So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting to m5mols_read() having no choice, is replaced to have original byte width like u8, u16, u32 as same reason. Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:51 UTC |
| bbe66ed | HeungJun, Kim | 31 May 2011, 05:27:53 UTC | [media] m5mols: Fix capture image size register definition The main capture and the thumbnail image size registers were erroneously defined to have 1 byte width, resulting in wrong reported image size. Fix this by changing the registers width to correct value. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:47 UTC |
| 3a3f944 | Sylwester Nawrocki | 28 April 2011, 12:06:19 UTC | [media] s5p-fimc: Update copyright notices Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:43 UTC |
| ba0545e | Sylwester Nawrocki | 20 May 2011, 17:02:11 UTC | [media] s5p-fimc: Use pix_mp for the color format lookup With multi-planar formats fmt.pix_mp member of struct v4l2_format should be used rather than fmt.pix. Fix find_fmt() function to do the right thing. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:39 UTC |
| dbdd0df | Sylwester Nawrocki | 23 May 2011, 12:15:17 UTC | [media] s5p-fimc: Remove empty buf_init operation The buf_init buffer queue operation is optional and buffer_init() does nothing, remove it. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:35 UTC |
| a629f86 | Sylwester Nawrocki | 23 May 2011, 12:15:05 UTC | [media] s5p-fimc: Fix wrong buffer size in queue_setup Avoid dereferencing of NULL f->fmt. Correct size of the allocated buffer in case the crop rectangle is smaller than the bounds rectangle (configured with S_FMT). Also remove redundant check for *num_buffer == 0 as this case is handled in videobuf2. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:32 UTC |
| 3495dce | Sylwester Nawrocki | 20 May 2011, 09:14:59 UTC | [media] s5p-fimc: Fix data structures documentation and cleanup debug trace Correct inconsistencies in data structures' documentation. Remove meaningless debug traces. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:28 UTC |
| 6ba8d13 | Sylwester Nawrocki | 18 May 2011, 17:14:56 UTC | [media] s5p-fimc: Fix V4L2_PIX_FMT_RGB565X description Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as camera interface supports only packed YUYV formats. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:24 UTC |
| cfd7731 | Sylwester Nawrocki | 02 June 2011, 09:18:34 UTC | [media] s5p-fimc: Fix possible memory leak during capture devnode registration Add missing kfree on the error path. Reported-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:45:20 UTC |
| 94215cc | Jarod Wilson | 04 June 2011, 17:14:41 UTC | [media] imon: fix initial panel key repeat suppression As pointed out on the lirc list by Andreas Dick, initial panel key repeat suppression wasn't working, as we had no timevals accumulated until after the first repeat. Also add a missing locking call. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:04:24 UTC |
| 443b391 | Jarod Wilson | 04 June 2011, 17:00:54 UTC | [media] imon: support for 0x46 0xffdc imon vfd Courtesy of information from Andreas Dick on the lirc list. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:04:16 UTC |
| 0b43fcd | Jarod Wilson | 24 May 2011, 19:44:54 UTC | [media] mceusb: plug memory leak on data transmit Hans Petter Selasky pointed out to me that we're leaking urbs when mce_async_out is called. Its used both for configuring the hardware and for transmitting IR data. In the tx case, mce_request_packet actually allocates both a urb and the transfer buffer, neither of which was being torn down. Do that in the tx callback. CC: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:04:04 UTC |
| 589e116 | Jarod Wilson | 24 May 2011, 17:19:23 UTC | [media] nuvoton-cir: in_use isn't actually in use, remove it Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:03:46 UTC |
| 0ae9025 | Jarod Wilson | 27 May 2011, 20:14:51 UTC | [media] fintek-cir: make suspend with active IR more reliable There was a missing lock in fintek_suspend. Without the lock, its possible the system will be in the middle of receiving IR (draining the RX buffer) when we try to disable CIR interrupts. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:03:35 UTC |
| 8de111e | Jarod Wilson | 27 May 2011, 19:56:50 UTC | [media] lirc_dev: store cdev in irctl, up maxdevs Store the cdev pointer in struct irctl, allocated dynamically as needed, rather than having a static array. At the same time, recycle some of the saved memory to nudge the maximum number of lirc devices supported up a ways -- its not that uncommon these days, now that we have the rc-core lirc bridge driver, to see a system with at least 4 raw IR receivers. (consider a mythtv backend with several video capture devices and the possible need for IR transmit hardware). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:03:20 UTC |
| 04f561f | Jarod Wilson | 27 May 2011, 18:46:19 UTC | [media] [staging] lirc_sir: fix unused-but-set warnings Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:02:23 UTC |
| e5fd0f7 | Jarod Wilson | 27 May 2011, 18:37:23 UTC | [media] [staging] lirc_imon: fix unused-but-set warnings Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:02:17 UTC |
| 3a918aa | Jarod Wilson | 26 May 2011, 17:23:18 UTC | [media] mceusb: mce_sync_in is brain-dead Aside from the initial "hey, lets make sure we've flushed any pre-existing data on the device" call to mce_sync_in, every other one of the calls was entirely superfluous. Ergo, remove them all, and rename the one and only (questionably) useful one to reflect what it really does. Verified on both gen2 and gen3 hardware to make zero difference. Well, except that you no longer get a bunch of urb submit failures from the unneeded mce_sync_in calls. Oh. And move that flush to a point *after* we've wired up the inbound urb, or it won't do squat. I have half a mind to just remove it entirely, but someone thought it was necessary at some point, and it doesn't seem to hurt, so lets leave it for the time being. This excercise took place due to insightful questions asked by Hans Petter Selasky, about the possible reuse of the inbound urb before it was actually availble by mce_sync_in, so thanks to him for motivating this cleanup. Reported-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:02:07 UTC |
| b825fe1 | Jarod Wilson | 26 May 2011, 19:03:17 UTC | [media] mceusb: support I-O Data GV-MC7/RCKIT There's an SMK-device-id remote kit from I-O Data avaiable primarily in Japan, which appears to have no tx hardware, but has rx functionality that works with the mceusb driver by simply adding its device ID. Reported-by: Jeremy Kwok <jeremykwok@desu.ca> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:01:40 UTC |
| 5ae8f9a | Jarod Wilson | 26 May 2011, 18:51:11 UTC | [media] mceusb: add and use mce_dbg printk macro Using dev_dbg is more complexity than many users are able to deal with. Make it easier to get debug spew feedback from them by adding an mce_dbg printk macro that spews using dev_info when debug=1 is set for the mceusb module. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 11 June 2011, 12:01:22 UTC |
| d364ee4 | Mauro Carvalho Chehab | 01 June 2011, 18:03:56 UTC | [media] soc_camera: preserve const attribute drivers/media/video/soc_camera.c: In function ‘soc_camera_video_start’: drivers/media/video/soc_camera.c:1515: warning: initialization discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 18:03:56 UTC |
| 76df01e | Mauro Carvalho Chehab | 01 June 2011, 17:44:41 UTC | [media] uvc_entity: initialize return value drivers/media/video/uvc/uvc_entity.c: In function ‘uvc_mc_register_entities’: drivers/media/video/uvc/uvc_entity.c:33: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 17:45:52 UTC |
| 8c89ddd | Laurent Pinchart | 30 May 2011, 18:45:47 UTC | [media] media: Fix media device minor registration The find_next_zero_bit() is called with the from and to arguments in the wrong order. This results in the function always returning 0, and all media devices being registered with minor 0. Furthermore, mdev->minor is then used before being assigned with the find_next_zero_bit() return value. This really makes sure we'll always use minor 0. Fix this and let the system support more than one media device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 16:24:23 UTC |
| 67e27c7 | Hans Petter Selasky | 23 May 2011, 11:09:18 UTC | [media] Make nchg variable signed because the code compares this variable against negative values The sonixj driver compares the value for nchg with: if (sd->nchg < -6 || sd->nchg >= 12) { With u8, negative values won't work. Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 15:20:57 UTC |
| 6c20c63 | Sanjeev Premi | 18 May 2011, 16:06:51 UTC | [media] omap3isp: fix compiler warning This patch fixes this compiler warning: drivers/media/video/omap3isp/isp.c: In function 'isp_isr_dbg': drivers/media/video/omap3isp/isp.c:392:2: warning: zero-length gnu_printf format string Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 12:42:28 UTC |
| 6e3ea0e | Laurent Pinchart | 02 May 2011, 19:21:03 UTC | [media] v4l: Fix media_entity_to_video_device macro argument name The name 'entity' is used twice in the macro body, once as the macro argument, and once as a structure field name. This breaks compilation if the macro is called with its argument not named 'entity'. Fix this by renaming the macro argument '__e'. This should avoid namespace clashes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 12:42:03 UTC |
| c5874c9 | Ian Armstrong | 30 May 2011, 00:33:17 UTC | [media] ivtv: Internally separate encoder & decoder standard setting Internally separates the setting of the broadcast standard for the encoder & decoder. Externally there's no change in functionality. [awalls@md.metrocast.net: Edited to fix a checkpatch gripe about multiple assignment and to remove a now unused DEFINE_WAIT() due to this patch] Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:46:38 UTC |
| 6600cc3 | Ian Armstrong | 29 May 2011, 01:15:41 UTC | [media] ivtvfb: Add sanity check to ivtvfb_pan_display() Add sanity check to ivtvfb_pan_display() to ensure only valid values are used to pan the display. Invalid values are rejected with -EINVAL Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:45:36 UTC |
| 5d9c08d | Laurent Pinchart | 25 May 2011, 09:41:23 UTC | [media] ivtvfb: use display information in info not in var for panning We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:45:19 UTC |
| 7700a0d | Ian Armstrong | 29 May 2011, 23:09:24 UTC | [media] ivtv: Make two ivtv_msleep_timeout calls uninterruptable Two ivtv_msleep_timeout() calls are incorrectly flagged as interruptable. The first is in the init sequence for a capture and is required for stable hardware setup. The second is at the end of the capture and used to handle the last data transfer. Failure to wait for this last transfer can result in stale data being read at the start of the next capture. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:45:03 UTC |
| 21d2e93 | Antti Palosaari | 24 May 2011, 09:04:08 UTC | [media] anysee: return EOPNOTSUPP for unsupported I2C messages Check I2C messages and return error properly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:34:45 UTC |
| c8ef0a5 | Jean-François Moine | 23 May 2011, 09:08:49 UTC | [media] gspca - ov519: Set the default frame rate to 15 fps The frame rate variable was not initialized, so, the lowest frame rate was used for most webcams. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:27:43 UTC |
| 5ff01d5 | Jean-François Moine | 23 May 2011, 07:51:10 UTC | [media] gspca - stv06xx: Set a lower default value of gain for hdcs sensors Many users said that the default gain value (128) was giving white images. The value which was in the original qc-usb driver (50) is better. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:26:54 UTC |
| 0e44173 | Jean-François Moine | 22 May 2011, 08:36:33 UTC | [media] gspca: Remove coarse_expo_autogain.h This file is replaced by autogain_functions.h. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:26:30 UTC |
| 9cf208e | Jean-François Moine | 22 May 2011, 08:05:11 UTC | [media] gspca - ov519: Change the ovfx2 bulk transfer size The 'normal' bulk transfer size did not work for 800x600. By git commit c42cedbb658b, this 'normal' size was used for 1600x1200 only. It will now be used back again for all resolutions but 800x600. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:26:11 UTC |
| 9d2b909 | Jean-François Moine | 22 May 2011, 07:56:32 UTC | [media] gspca - ov519: Fix a regression for ovfx2 webcams By git commit c42cedbb658b, the bulk transfer size was changed to a lower value for resolutions != 1600x1200, but the image extraction routine still worked with the previous value, giving bad truncated images. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 01 June 2011, 11:25:56 UTC |
| 55922c9 | Linus Torvalds | 30 May 2011, 00:43:36 UTC | Linux 3.0-rc1 .. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 May 2011, 00:43:36 UTC |
| bd1bfe4 | Linus Torvalds | 29 May 2011, 21:13:25 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Remove ecryptfs_header_cache_2 eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() eCryptfs: Return useful code from contains_ecryptfs_marker eCryptfs: Fix new inode race condition eCryptfs: Cleanup inode initialization code eCryptfs: Consolidate inode functions into inode.c | 29 May 2011, 21:13:25 UTC |
| cd1acdf | Linus Torvalds | 29 May 2011, 21:10:13 UTC | Merge branch 'pnfs-submit' of git://git.open-osd.org/linux-open-osd * 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits) pnfs-obj: pg_test check for max_io_size NFSv4.1: define nfs_generic_pg_test NFSv4.1: use pnfs_generic_pg_test directly by layout driver NFSv4.1: change pg_test return type to bool NFSv4.1: unify pnfs_pageio_init functions pnfs-obj: objlayout_encode_layoutcommit implementation pnfs: encode_layoutcommit pnfs-obj: report errors and .encode_layoutreturn Implementation. pnfs: encode_layoutreturn pnfs: layoutret_on_setattr pnfs: layoutreturn pnfs-obj: osd raid engine read/write implementation pnfs: support for non-rpc layout drivers pnfs-obj: define per-inode private structure pnfs: alloc and free layout_hdr layoutdriver methods pnfs-obj: objio_osd device information retrieval and caching pnfs-obj: decode layout, alloc/free lseg pnfs-obj: pnfs_osd XDR client implementation pnfs-obj: pnfs_osd XDR definitions pnfs-obj: objlayoutdriver module skeleton ... | 29 May 2011, 21:10:13 UTC |
| fac0486 | Linus Torvalds | 29 May 2011, 21:06:42 UTC | arm gpio drivers: make them 'depends on ARM' We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 May 2011, 21:06:42 UTC |
| 3063287 | Tyler Hicks | 24 May 2011, 10:11:12 UTC | eCryptfs: Remove ecryptfs_header_cache_2 Now that ecryptfs_lookup_interpose() is no longer using ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to ecryptfs_header_cache. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> | 29 May 2011, 19:24:25 UTC |
| 778aeb4 | Tyler Hicks | 24 May 2011, 09:56:23 UTC | eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() ecryptfs_lookup_interpose() has turned into spaghetti code over the years. This is an effort to clean it up. - Shorten overly descriptive variable names such as ecryptfs_dentry - Simplify gotos and error paths - Create helper function for reading plaintext i_size from metadata It also includes an optimization when reading i_size from the metadata. A complete page-sized kmem_cache_alloc() was being done to read in 16 bytes of metadata. The buffer for that is now statically declared. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> | 29 May 2011, 19:24:24 UTC |
| 7a86617 | Tyler Hicks | 02 May 2011, 05:39:54 UTC | eCryptfs: Return useful code from contains_ecryptfs_marker Instead of having the calling functions translate the true/false return code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or -EINVAL so that the calling functions can just reuse the return code. Also, rename the function to ecryptfs_validate_marker() to avoid callers mistakenly thinking that it returns true/false codes. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> | 29 May 2011, 19:24:24 UTC |
| 3b06b3e | Tyler Hicks | 24 May 2011, 08:49:02 UTC | eCryptfs: Fix new inode race condition Only unlock and d_add() new inodes after the plaintext inode size has been read from the lower filesystem. This fixes a race condition that was sometimes seen during a multi-job kernel build in an eCryptfs mount. https://bugzilla.kernel.org/show_bug.cgi?id=36002 Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Reported-by: David <david@unsolicited.net> Tested-by: David <david@unsolicited.net> | 29 May 2011, 19:23:39 UTC |
| 2ba781c | Linus Torvalds | 29 May 2011, 18:44:33 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits) acer-wmi: support integer return type from WMI methods msi-laptop: fix section mismatch in reference from the function load_scm_model_init acer-wmi: support to set communication device state by new wmid method acer-wmi: allow 64-bits return buffer from WMI methods acer-wmi: check the existence of internal 3G device when set capability platform/x86:delete two unused variables support wlan hotkey on Acer Travelmate 5735Z platform-x86: intel_mid_thermal: Fix memory leak platform/x86: Fix Makefile for intel_mid_powerbtn platform/x86: Simplify intel_mid_powerbtn acer-wmi: Delete out-of-date documentation acerhdf: Clean up includes acerhdf: Drop pointless dependency on THERMAL_HWMON acer-wmi: Update MAINTAINERS wmi: Orphan ACPI-WMI driver tc1100-wmi: Orphan driver acer-wmi: does not allow negative number set to initial device state platform/oaktrail: ACPI EC Extra driver for Oaktrail thinkpad_acpi: Convert printks to pr_<level> thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning ... | 29 May 2011, 18:44:33 UTC |
| 6345d24 | Linus Torvalds | 29 May 2011, 18:32:28 UTC | mm: Fix boot crash in mm_alloc() Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c11ae035>] find_next_bit+0x55/0xb0 Call Trace: [<c11addda>] cpumask_any_but+0x2a/0x70 [<c102396b>] flush_tlb_mm+0x2b/0x80 [<c1022705>] pud_populate+0x35/0x50 [<c10227ba>] pgd_alloc+0x9a/0xf0 [<c103a3fc>] mm_init+0xec/0x120 [<c103a7a3>] mm_alloc+0x53/0xd0 which was introduced by commit de03c72cfce5 ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Ingo Molnar <mingo@elte.hu> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 May 2011, 18:32:28 UTC |
| cab0d85 | Linus Torvalds | 29 May 2011, 18:30:20 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] mm: fix mmu_gather rework [S390] mm: fix storage key handling | 29 May 2011, 18:30:20 UTC |
| 57ed609 | Linus Torvalds | 29 May 2011, 18:29:28 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: more /proc and /sys file support | 29 May 2011, 18:29:28 UTC |
| 437cb0d | Matthew Garrett | 29 May 2011, 18:27:13 UTC | Merge branch 'x86-platform-next' into x86-platform | 29 May 2011, 18:27:13 UTC |
| a74d70b | Linus Torvalds | 29 May 2011, 18:21:12 UTC | Merge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linux * 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd: make local functions static NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() NFSD: Check status from nfsd4_map_bcts_dir() NFSD: Remove setting unused variable in nfsd_vfs_read() nfsd41: error out on repeated RECLAIM_COMPLETE nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence nfsd v4.1 lOCKT clientid field must be ignored nfsd41: add flag checking for create_session nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly nfsd4: fix wrongsec handling for PUTFH + op cases nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller nfsd4: introduce OPDESC helper nfsd4: allow fh_verify caller to skip pseudoflavor checks nfsd: distinguish functions of NFSD_MAY_* flags svcrpc: complete svsk processing on cb receive failure svcrpc: take advantage of tcp autotuning SUNRPC: Don't wait for full record to receive tcp data svcrpc: copy cb reply instead of pages svcrpc: close connection if client sends short packet svcrpc: note network-order types in svc_process_calldir ... | 29 May 2011, 18:21:12 UTC |
| b11b06d | Linus Torvalds | 29 May 2011, 18:20:48 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: return client directly and not through a pointer dm kcopyd: reserve fewer pages dm io: use fixed initial mempool size dm kcopyd: alloc pages from the main page allocator dm kcopyd: add gfp parm to alloc_pl dm kcopyd: remove superfluous page allocation spinlock dm kcopyd: preallocate sub jobs to avoid deadlock dm kcopyd: avoid pointless job splitting dm mpath: do not fail paths after integrity errors dm table: reject devices without request fns dm table: allow targets to support discards internally | 29 May 2011, 18:20:48 UTC |
| f1d1c9f | Linus Torvalds | 29 May 2011, 18:20:02 UTC | Merge branch 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Support for RPC over AF_LOCAL transports SUNRPC: Remove obsolete comment SUNRPC: Use AF_LOCAL for rpcbind upcalls SUNRPC: Clean up use of curly braces in switch cases NFS: Revert NFSROOT default mount options SUNRPC: Rename xs_encode_tcp_fragment_header() nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() nfs41: Correct offset for LAYOUTCOMMIT NFS: nfs_update_inode: print current and new inode size in debug output NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors NFSv4: Handle expired stateids when the lease is still valid SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback... | 29 May 2011, 18:20:02 UTC |
| 2ff55e9 | Linus Torvalds | 29 May 2011, 18:19:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus * git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Fix sanity check patches on big-endian systems | 29 May 2011, 18:19:45 UTC |
| daa9422 | Linus Torvalds | 29 May 2011, 18:19:16 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI EC: remove redundant code ACPI: Add D3 cold state ACPI: processor: fix processor_physically_present in UP kernel ACPI: Split out custom_method functionality into an own driver ACPI: Cleanup custom_method debug stuff ACPI EC: enable MSI workaround for Quanta laptops ACPICA: Update to version 20110413 ACPICA: Execute an orphan _REG method under the EC device ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place ACPICA: Update internal address SpaceID for DataTable regions ACPICA: Add more methods eligible for NULL package element removal ACPICA: Split all internal Global Lock functions to new file - evglock ACPI: EC: add another DMI check for ASUS hardware ACPI EC: remove dead code ACPICA: Fix code divergence of global lock handling ACPICA: Use acpi_os_create_lock interface ACPI: osl, add acpi_os_create_lock interface ACPI:Fix goto flows in thermal-sys | 29 May 2011, 18:19:16 UTC |
| f310642 | Linus Torvalds | 29 May 2011, 18:18:09 UTC | Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param x86 idle: deprecate "no-hlt" cmdline param x86 idle APM: deprecate CONFIG_APM_CPU_IDLE x86 idle floppy: deprecate disable_hlt() x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it x86 idle: clarify AMD erratum 400 workaround idle governor: Avoid lock acquisition to read pm_qos before entering idle cpuidle: menu: fixed wrapping timers at 4.294 seconds | 29 May 2011, 18:18:09 UTC |
| ef1d575 | Al Viro | 29 May 2011, 12:46:08 UTC | cifs/ubifs: Fix shrinker API change fallout Commit 1495f230fa77 ("vmscan: change shrinker API by passing shrink_control struct") changed the API of ->shrink(), but missed ubifs and cifs instances. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 May 2011, 18:17:34 UTC |
| 9342077 | Boaz Harrosh | 25 May 2011, 18:25:29 UTC | pnfs-obj: pg_test check for max_io_size Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [simplify logic] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 18:03:08 UTC |
| 5b36c7d | Boaz Harrosh | 29 May 2011, 08:45:39 UTC | NFSv4.1: define nfs_generic_pg_test By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 18:02:42 UTC |
| 89a58e3 | Benny Halevy | 25 May 2011, 17:54:40 UTC | NFSv4.1: use pnfs_generic_pg_test directly by layout driver Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:56:55 UTC |
| 18ad0a9 | Benny Halevy | 25 May 2011, 18:03:56 UTC | NFSv4.1: change pg_test return type to bool Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:56:54 UTC |
| dfed206 | Benny Halevy | 25 May 2011, 17:25:22 UTC | NFSv4.1: unify pnfs_pageio_init functions Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:56:43 UTC |
| a0fe8bf | Boaz Harrosh | 22 May 2011, 16:54:13 UTC | pnfs-obj: objlayout_encode_layoutcommit implementation * Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:55:00 UTC |
| ac7db72 | Benny Halevy | 22 May 2011, 16:53:48 UTC | pnfs: encode_layoutcommit Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:55:00 UTC |
| adb5853 | Boaz Harrosh | 26 May 2011, 18:49:46 UTC | pnfs-obj: report errors and .encode_layoutreturn Implementation. An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:54:45 UTC |
| 04a5554 | Andy Adamson | 22 May 2011, 16:53:10 UTC | pnfs: encode_layoutreturn Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by: Andy Adamson <andros@netapp.com> [fixup layout header pointer for encode_layoutreturn] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:54:37 UTC |
| 8a1636c | Benny Halevy | 14 July 2010, 19:43:57 UTC | pnfs: layoutret_on_setattr With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:54:36 UTC |
| cbe8260 | Benny Halevy | 22 May 2011, 16:52:37 UTC | pnfs: layoutreturn NFSv4.1 LAYOUTRETURN implementation Currently, does not support layout-type payload encoding. Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> [call pnfs_return_layout right before pnfs_destroy_layout] [remove assert_spin_locked from pnfs_clear_lseg_list] [remove wait parameter from the layoutreturn path.] [remove return_type field from nfs4_layoutreturn_args] [remove range from nfs4_layoutreturn_args] [no need to send layoutcommit from _pnfs_return_layout] [don't wait on sync layoutreturn] [fix layout stateid in layoutreturn args] [fixed NULL deref in _pnfs_return_layout] [removed recaim member of nfs4_layoutreturn_args] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:54:36 UTC |
| 04f8345 | Boaz Harrosh | 22 May 2011, 16:52:19 UTC | pnfs-obj: osd raid engine read/write implementation With the use of the in-kernel osd library. Implement read/write of data from/to osd-objects according to information specified in the objects-layout. Support for stripping over mirrors with a received stripe_unit. There are however a few constrains which are not supported: 1. Stripe Unit must be a multiple of PAGE_SIZE 2. stripe length (stripe_unit * number_of_stripes) can not be bigger then 32bit. Also support raid-groups and partial-layout. Partial-layout is when not all the groups are received on the line, addressing only a partial range of the file. TODO: Only raid0! raid 4/5/6 support will come at later stage A none supported layout will send IO through the MDS [Important fallout from the last rebase] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:54:15 UTC |
| d20581a | Benny Halevy | 22 May 2011, 16:52:03 UTC | pnfs: support for non-rpc layout drivers Non-rpc layout driver such as for objects and blocks implement their own I/O path and error handling logic. Therefore bypass NFS-based error handling for these layout drivers. [fix lseg ref-count bugs, and null de-refs] [Fall out from: non-rpc layout drivers] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [get rid of PNFS_USE_RPC_CODE] [get rid of __nfs4_write_done_cb] [revert useless change in nfs4_write_done_cb] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:53:51 UTC |
| e51b841 | Benny Halevy | 22 May 2011, 16:51:48 UTC | pnfs-obj: define per-inode private structure allocate and deallocate per-inode private pnfs_layout_hdr in preparation for I/O implementation. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:53:51 UTC |
| 636fb9c | Benny Halevy | 22 May 2011, 16:51:33 UTC | pnfs: alloc and free layout_hdr layoutdriver methods [gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com> | 29 May 2011, 17:53:50 UTC |
