Revision 2284bbd0cf3981462dc6d729c89851c66b05a66a authored by Leon Schuermann on 11 January 2021, 19:03:15 UTC, committed by Jakub Kicinski on 13 January 2021, 04:00:51 UTC
This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent cb82a54
| File | Mode | Size |
|---|---|---|
| ad1816a | ||
| ad1848 | ||
| cs423x | ||
| es1688 | ||
| galaxy | ||
| gus | ||
| msnd | ||
| opti9xx | ||
| sb | ||
| wavefront | ||
| wss | ||
| Kconfig | -rw-r--r-- | 12.7 KB |
| Makefile | -rw-r--r-- | 892 bytes |
| adlib.c | -rw-r--r-- | 2.7 KB |
| als100.c | -rw-r--r-- | 9.7 KB |
| azt2320.c | -rw-r--r-- | 8.9 KB |
| cmi8328.c | -rw-r--r-- | 13.5 KB |
| cmi8330.c | -rw-r--r-- | 21.8 KB |
| es18xx.c | -rw-r--r-- | 68.3 KB |
| opl3sa2.c | -rw-r--r-- | 28.4 KB |
| sc6000.c | -rw-r--r-- | 17.1 KB |
| sscape.c | -rw-r--r-- | 32.1 KB |
Computing file changes ...
