Revision 2284bbd0cf3981462dc6d729c89851c66b05a66a authored by Leon Schuermann on 11 January 2021, 19:03:15 UTC, committed by Jakub Kicinski on 13 January 2021, 04:00:51 UTC
This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent cb82a54
Makefile
# SPDX-License-Identifier: GPL-2.0
snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-utils.o soc-dai.o soc-component.o
snd-soc-core-objs += soc-pcm.o soc-devres.o soc-ops.o soc-link.o soc-card.o
snd-soc-core-$(CONFIG_SND_SOC_COMPRESS) += soc-compress.o
ifneq ($(CONFIG_SND_SOC_TOPOLOGY),)
snd-soc-core-objs += soc-topology.o
endif
ifneq ($(CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM),)
snd-soc-core-objs += soc-generic-dmaengine-pcm.o
endif
ifneq ($(CONFIG_SND_SOC_AC97_BUS),)
snd-soc-core-objs += soc-ac97.o
endif
ifneq ($(CONFIG_SND_SOC_ACPI),)
snd-soc-acpi-objs := soc-acpi.o
endif
obj-$(CONFIG_SND_SOC_ACPI) += snd-soc-acpi.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
obj-$(CONFIG_SND_SOC) += generic/
obj-$(CONFIG_SND_SOC) += adi/
obj-$(CONFIG_SND_SOC) += amd/
obj-$(CONFIG_SND_SOC) += atmel/
obj-$(CONFIG_SND_SOC) += au1x/
obj-$(CONFIG_SND_SOC) += bcm/
obj-$(CONFIG_SND_SOC) += cirrus/
obj-$(CONFIG_SND_SOC) += dwc/
obj-$(CONFIG_SND_SOC) += fsl/
obj-$(CONFIG_SND_SOC) += hisilicon/
obj-$(CONFIG_SND_SOC) += jz4740/
obj-$(CONFIG_SND_SOC) += img/
obj-$(CONFIG_SND_SOC) += intel/
obj-$(CONFIG_SND_SOC) += mediatek/
obj-$(CONFIG_SND_SOC) += meson/
obj-$(CONFIG_SND_SOC) += mxs/
obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += qcom/
obj-$(CONFIG_SND_SOC) += rockchip/
obj-$(CONFIG_SND_SOC) += samsung/
obj-$(CONFIG_SND_SOC) += sh/
obj-$(CONFIG_SND_SOC) += sirf/
obj-$(CONFIG_SND_SOC) += sof/
obj-$(CONFIG_SND_SOC) += spear/
obj-$(CONFIG_SND_SOC) += sprd/
obj-$(CONFIG_SND_SOC) += sti/
obj-$(CONFIG_SND_SOC) += stm/
obj-$(CONFIG_SND_SOC) += sunxi/
obj-$(CONFIG_SND_SOC) += tegra/
obj-$(CONFIG_SND_SOC) += ti/
obj-$(CONFIG_SND_SOC) += txx9/
obj-$(CONFIG_SND_SOC) += uniphier/
obj-$(CONFIG_SND_SOC) += ux500/
obj-$(CONFIG_SND_SOC) += xilinx/
obj-$(CONFIG_SND_SOC) += xtensa/
obj-$(CONFIG_SND_SOC) += zte/
Computing file changes ...
