Revision 2284bbd0cf3981462dc6d729c89851c66b05a66a authored by Leon Schuermann on 11 January 2021, 19:03:15 UTC, committed by Jakub Kicinski on 13 January 2021, 04:00:51 UTC
This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent cb82a54
File | Mode | Size |
---|---|---|
Kconfig | -rw-r--r-- | 6.5 KB |
Makefile | -rw-r--r-- | 3.3 KB |
aries_wm8994.c | -rw-r--r-- | 17.4 KB |
arndale.c | -rw-r--r-- | 5.6 KB |
bells.c | -rw-r--r-- | 12.4 KB |
dma.h | -rw-r--r-- | 512 bytes |
dmaengine.c | -rw-r--r-- | 1.1 KB |
h1940_uda1380.c | -rw-r--r-- | 5.3 KB |
i2s-regs.h | -rw-r--r-- | 4.4 KB |
i2s.c | -rw-r--r-- | 40.0 KB |
i2s.h | -rw-r--r-- | 829 bytes |
idma.c | -rw-r--r-- | 9.6 KB |
idma.h | -rw-r--r-- | 444 bytes |
jive_wm8750.c | -rw-r--r-- | 3.3 KB |
littlemill.c | -rw-r--r-- | 8.2 KB |
lowland.c | -rw-r--r-- | 5.2 KB |
midas_wm1811.c | -rw-r--r-- | 13.5 KB |
neo1973_wm8753.c | -rw-r--r-- | 9.6 KB |
odroid.c | -rw-r--r-- | 8.9 KB |
pcm.c | -rw-r--r-- | 15.1 KB |
pcm.h | -rw-r--r-- | 206 bytes |
regs-i2s-v2.h | -rw-r--r-- | 4.0 KB |
regs-iis.h | -rw-r--r-- | 2.0 KB |
rx1950_uda1380.c | -rw-r--r-- | 5.9 KB |
s3c-i2s-v2.c | -rw-r--r-- | 15.7 KB |
s3c-i2s-v2.h | -rw-r--r-- | 3.3 KB |
s3c2412-i2s.c | -rw-r--r-- | 6.2 KB |
s3c2412-i2s.h | -rw-r--r-- | 612 bytes |
s3c24xx-i2s.c | -rw-r--r-- | 11.5 KB |
s3c24xx-i2s.h | -rw-r--r-- | 725 bytes |
s3c24xx_simtec.c | -rw-r--r-- | 8.6 KB |
s3c24xx_simtec.h | -rw-r--r-- | 467 bytes |
s3c24xx_simtec_hermes.c | -rw-r--r-- | 2.9 KB |
s3c24xx_simtec_tlv320aic23.c | -rw-r--r-- | 2.6 KB |
s3c24xx_uda134x.c | -rw-r--r-- | 6.5 KB |
smartq_wm8987.c | -rw-r--r-- | 5.4 KB |
smdk_spdif.c | -rw-r--r-- | 4.9 KB |
smdk_wm8580.c | -rw-r--r-- | 4.9 KB |
smdk_wm8994.c | -rw-r--r-- | 5.3 KB |
smdk_wm8994pcm.c | -rw-r--r-- | 3.4 KB |
snow.c | -rw-r--r-- | 6.0 KB |
spdif.c | -rw-r--r-- | 11.8 KB |
spdif.h | -rw-r--r-- | 373 bytes |
speyside.c | -rw-r--r-- | 8.7 KB |
tm2_wm5110.c | -rw-r--r-- | 16.5 KB |
tobermory.c | -rw-r--r-- | 5.7 KB |
Computing file changes ...