Revision 22ed1113a9adda6e193c329119a384362da01289 authored by Chris Wilson on 04 December 2010, 01:01:29 UTC, committed by Chris Wilson on 03 December 2010, 23:51:02 UTC
Use the hardware DDA to calculate the ratio with as much accuracy as is possible. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
1 parent 47f1c6c
setup.c
/*
* linux/arch/m32r/kernel/setup.c
*
* Setup routines for Renesas M32R
*
* Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata,
* Hitoshi Yamamoto
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/initrd.h>
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/seq_file.h>
#include <linux/timex.h>
#include <linux/screen_info.h>
#include <linux/cpu.h>
#include <linux/nodemask.h>
#include <linux/pfn.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/m32r.h>
#include <asm/setup.h>
#include <asm/sections.h>
#ifdef CONFIG_MMU
extern void init_mmu(void);
#endif
extern char _end[];
/*
* Machine setup..
*/
struct cpuinfo_m32r boot_cpu_data;
#ifdef CONFIG_BLK_DEV_RAM
extern int rd_doload; /* 1 = load ramdisk, 0 = don't load */
extern int rd_prompt; /* 1 = prompt for ramdisk, 0 = don't prompt */
extern int rd_image_start; /* starting block # of image */
#endif
#if defined(CONFIG_VGA_CONSOLE)
struct screen_info screen_info = {
.orig_video_lines = 25,
.orig_video_cols = 80,
.orig_video_mode = 0,
.orig_video_ega_bx = 0,
.orig_video_isVGA = 1,
.orig_video_points = 8
};
#endif
extern int root_mountflags;
static char __initdata command_line[COMMAND_LINE_SIZE];
static struct resource data_resource = {
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
static struct resource code_resource = {
.name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
unsigned long memory_start;
unsigned long memory_end;
void __init setup_arch(char **);
int get_cpuinfo(char *);
static __inline__ void parse_mem_cmdline(char ** cmdline_p)
{
char c = ' ';
char *to = command_line;
char *from = COMMAND_LINE;
int len = 0;
int usermem = 0;
/* Save unparsed command line copy for /proc/cmdline */
memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
memory_start = (unsigned long)CONFIG_MEMORY_START+PAGE_OFFSET;
memory_end = memory_start+(unsigned long)CONFIG_MEMORY_SIZE;
for ( ; ; ) {
if (c == ' ' && !memcmp(from, "mem=", 4)) {
if (to != command_line)
to--;
{
unsigned long mem_size;
usermem = 1;
mem_size = memparse(from+4, &from);
memory_end = memory_start + mem_size;
}
}
c = *(from++);
if (!c)
break;
if (COMMAND_LINE_SIZE <= ++len)
break;
*(to++) = c;
}
*to = '\0';
*cmdline_p = command_line;
if (usermem)
printk(KERN_INFO "user-defined physical RAM map:\n");
}
#ifndef CONFIG_DISCONTIGMEM
static unsigned long __init setup_memory(void)
{
unsigned long start_pfn, max_low_pfn, bootmap_size;
start_pfn = PFN_UP( __pa(_end) );
max_low_pfn = PFN_DOWN( __pa(memory_end) );
/*
* Initialize the boot-time allocator (with low memory only):
*/
bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
CONFIG_MEMORY_START>>PAGE_SHIFT, max_low_pfn);
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
{
unsigned long curr_pfn;
unsigned long last_pfn;
unsigned long pages;
/*
* We are rounding up the start address of usable memory:
*/
curr_pfn = PFN_UP(__pa(memory_start));
/*
* ... and at the end of the usable range downwards:
*/
last_pfn = PFN_DOWN(__pa(memory_end));
if (last_pfn > max_low_pfn)
last_pfn = max_low_pfn;
pages = last_pfn - curr_pfn;
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
}
/*
* Reserve the kernel text and
* Reserve the bootmem bitmap. We do this in two steps (first step
* was init_bootmem()), because this catches the (definitely buggy)
* case of us accidentally initializing the bootmem allocator with
* an invalid RAM area.
*/
reserve_bootmem(CONFIG_MEMORY_START + PAGE_SIZE,
(PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE - 1)
- CONFIG_MEMORY_START,
BOOTMEM_DEFAULT);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
* enabling clean reboots, SMP operation, laptop functions.
*/
reserve_bootmem(CONFIG_MEMORY_START, PAGE_SIZE, BOOTMEM_DEFAULT);
/*
* reserve memory hole
*/
#ifdef CONFIG_MEMHOLE
reserve_bootmem(CONFIG_MEMHOLE_START, CONFIG_MEMHOLE_SIZE,
BOOTMEM_DEFAULT);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
reserve_bootmem(INITRD_START, INITRD_SIZE,
BOOTMEM_DEFAULT);
initrd_start = INITRD_START + PAGE_OFFSET;
initrd_end = initrd_start + INITRD_SIZE;
printk("initrd:start[%08lx],size[%08lx]\n",
initrd_start, INITRD_SIZE);
} else {
printk("initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
INITRD_START + INITRD_SIZE,
max_low_pfn << PAGE_SHIFT);
initrd_start = 0;
}
}
#endif
return max_low_pfn;
}
#else /* CONFIG_DISCONTIGMEM */
extern unsigned long setup_memory(void);
#endif /* CONFIG_DISCONTIGMEM */
void __init setup_arch(char **cmdline_p)
{
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
boot_cpu_data.cpu_clock = M32R_CPUCLK;
boot_cpu_data.bus_clock = M32R_BUSCLK;
boot_cpu_data.timer_divide = M32R_TIMER_DIVIDE;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif
if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
#ifdef CONFIG_DISCONTIGMEM
nodes_clear(node_online_map);
node_set_online(0);
node_set_online(1);
#endif /* CONFIG_DISCONTIGMEM */
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
code_resource.start = virt_to_phys(_text);
code_resource.end = virt_to_phys(_etext)-1;
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
parse_mem_cmdline(cmdline_p);
setup_memory();
paging_init();
}
static struct cpu cpu_devices[NR_CPUS];
static int __init topology_init(void)
{
int i;
for_each_present_cpu(i)
register_cpu(&cpu_devices[i], i);
return 0;
}
subsys_initcall(topology_init);
#ifdef CONFIG_PROC_FS
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_m32r *c = v;
unsigned long cpu = c - cpu_data;
#ifdef CONFIG_SMP
if (!cpu_online(cpu))
return 0;
#endif /* CONFIG_SMP */
seq_printf(m, "processor\t: %ld\n", cpu);
#if defined(CONFIG_CHIP_VDEC2)
seq_printf(m, "cpu family\t: VDEC2\n"
"cache size\t: Unknown\n");
#elif defined(CONFIG_CHIP_M32700)
seq_printf(m,"cpu family\t: M32700\n"
"cache size\t: I-8KB/D-8KB\n");
#elif defined(CONFIG_CHIP_M32102)
seq_printf(m,"cpu family\t: M32102\n"
"cache size\t: I-8KB\n");
#elif defined(CONFIG_CHIP_OPSP)
seq_printf(m,"cpu family\t: OPSP\n"
"cache size\t: I-8KB/D-8KB\n");
#elif defined(CONFIG_CHIP_MP)
seq_printf(m, "cpu family\t: M32R-MP\n"
"cache size\t: I-xxKB/D-xxKB\n");
#elif defined(CONFIG_CHIP_M32104)
seq_printf(m,"cpu family\t: M32104\n"
"cache size\t: I-8KB/D-8KB\n");
#else
seq_printf(m, "cpu family\t: Unknown\n");
#endif
seq_printf(m, "bogomips\t: %lu.%02lu\n",
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
#if defined(CONFIG_PLAT_MAPPI)
seq_printf(m, "Machine\t\t: Mappi Evaluation board\n");
#elif defined(CONFIG_PLAT_MAPPI2)
seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n");
#elif defined(CONFIG_PLAT_MAPPI3)
seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n");
#elif defined(CONFIG_PLAT_M32700UT)
seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n");
#elif defined(CONFIG_PLAT_OPSPUT)
seq_printf(m, "Machine\t\t: OPSPUT Evaluation board\n");
#elif defined(CONFIG_PLAT_USRV)
seq_printf(m, "Machine\t\t: uServer\n");
#elif defined(CONFIG_PLAT_OAKS32R)
seq_printf(m, "Machine\t\t: OAKS32R\n");
#elif defined(CONFIG_PLAT_M32104UT)
seq_printf(m, "Machine\t\t: M3T-M32104UT uT Engine board\n");
#else
seq_printf(m, "Machine\t\t: Unknown\n");
#endif
#define PRINT_CLOCK(name, value) \
seq_printf(m, name " clock\t: %d.%02dMHz\n", \
((value) / 1000000), ((value) % 1000000)/10000)
PRINT_CLOCK("CPU", (int)c->cpu_clock);
PRINT_CLOCK("Bus", (int)c->bus_clock);
seq_printf(m, "\n");
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? cpu_data + *pos : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */
unsigned long cpu_initialized __initdata = 0;
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process.
* We reload them nevertheless, this function acts as a
* 'CPU state barrier', nothing should get across.
*/
#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \
|| defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
void __init cpu_init (void)
{
int cpu_id = smp_processor_id();
if (test_and_set_bit(cpu_id, &cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id);
for ( ; ; )
local_irq_enable();
}
printk(KERN_INFO "Initializing CPU#%d\n", cpu_id);
/* Set up and load the per-CPU TSS and LDT */
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
if (current->mm)
BUG();
/* Force FPU initialization */
current_thread_info()->status = 0;
clear_used_math();
#ifdef CONFIG_MMU
/* Set up MMU */
init_mmu();
#endif
/* Set up ICUIMASK */
outl(0x00070000, M32R_ICU_IMASK_PORTL); /* imask=111 */
}
#endif /* defined(CONFIG_CHIP_VDEC2) ... */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...