| 238713d | Takashi Iwai | 05 October 2008, 08:57:39 UTC | ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI The PCI SSID for ASROCK mobo in commit ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong. This patch fixes to the correct one, 1849:3662. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:50 UTC |
| 310e0dc | Pedro Lopez-Cabanillas | 04 October 2008, 14:27:36 UTC | ALSA: snd-usb-audio: support for Edirol UA-4FX device Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:48 UTC |
| 7a17daa | Takashi Iwai | 02 October 2008, 12:50:22 UTC | ALSA: usb - Fix possible Oops at USB-MIDI disconnection The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:48 UTC |
| 669faba | Clive Messer | 30 September 2008, 13:49:13 UTC | ALSA: hda - Fix another ALC889A (rev 0x100101) ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by: Clive Messer <clive@vacuumtube.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:47 UTC |
| 19c009a | Vedran Miletic | 29 September 2008, 18:29:25 UTC | ALSA: hda: add more board-specific information for Realtek ALC662 rev1 I recently got a chance to play with two boards with ALC662 rev1: * BIOSTAR TA780G M2+ * ASROCK K10N78FullHD-hSLI R3.0 Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able to figure that out from BIOS, we need to specify that manually. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:46 UTC |
| d6b5203 | Vladimir Barinov | 29 September 2008, 19:14:11 UTC | ALSA: Correct Vladimir Barinov's e-mail address Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:45 UTC |
| b636a1d | Vedran Miletic | 29 September 2008, 13:08:00 UTC | ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards This patch adds PCI IDs for: * TerraTec DMX XFire 1024 * Hercules Gamesurround Fortissimo II * Hercules Gamesurround Fortissimo III 7.1 All those cards were supported as generic CS46xx device, so they will work as before. I'm pretty sure that first two cards work, as they have same hardware design as reference card. Not sure about Fortissimo III, but this won't break it if it worked. Tested on TerraTec DMX XFire 1024. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:44 UTC |
| 00ef50c | Matthew Ranostay | 27 September 2008, 22:13:47 UTC | ALSA: hda: SPDIF stream muting support Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on supporting codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:43 UTC |
| f3911c5 | Peter Korsgaard | 27 September 2008, 07:13:45 UTC | ALSA: hda: appletv support The AppleTV needs the same handling as the 24" iMac. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:43 UTC |
| 95fe5f2 | Herton Ronaldo Krzesinski | 27 September 2008, 02:48:45 UTC | ALSA: hda - Map ALC662 model for Foxconn 45CMX/45GMX/45CMX-K Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:42 UTC |
| cb55974 | Herton Ronaldo Krzesinski | 27 September 2008, 02:47:45 UTC | ALSA: hda - Map ALC662 model for Gigabyte 945GCM-S2L Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:41 UTC |
| 71dc525 | Julien Brunel | 26 September 2008, 13:23:46 UTC | ALSA: sound/soc/at32: Useless NULL test The test (ssc != NULL) can only be reached if the call to the function ssc_request, the result of which ssc is assigned, succeeds. Moreover, two statements assign NULL to ssc just before a return, which is useless since it is a local variable. So, we suggest to delete the test and the two assignments. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @bad_null_test@ expression x,E; @@ x = ssc_request(...) ... when != x = E * x != NULL // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:40 UTC |
| 9a9e235 | Matthew Ranostay | 26 September 2008, 14:37:03 UTC | ALSA: hda: HP laptop quirk Added HP laptop SND_PCI_QUIRK for STAC_HP_M4. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:39 UTC |
| b2c4f4d | Matthew Ranostay | 26 September 2008, 14:06:40 UTC | ALSA: hda: 92xx S/PDIF In support Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:38 UTC |
| 97c889a | Eran Tromer | 26 September 2008, 05:07:03 UTC | ALSA: usb-audio: add support for E-Mu Tracker Pre Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran@tromer.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:37 UTC |
| dc9c8e2 | Wei Ni | 26 September 2008, 05:55:56 UTC | ALSA: Fix for reading RIRB buffer on NVIDIA aza controller with AMD Phenom cpu When read RIRB buffer immediately after RIRB interrupt received, sometimes the data will be "0x0". If we wait for some time, the data in buffer will be correct. This issue only occurred with AMD Phenom cpu. So we set this "needs_damn_long_delay" flag. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:36 UTC |
| 9a10eb2 | Wei Ni | 26 September 2008, 05:45:46 UTC | ALSA: Support NVIDIA MCP78/7A HDMI audio Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver, include NVIDIA MCP78/7A HDMI. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:35 UTC |
| 2f72853 | Takashi Iwai | 25 September 2008, 14:32:41 UTC | ALSA: hda - Fix / clean-up slave digital out codes The recent slave_dig_out addition has some rooms to clean up. Also it doesn't call snd_hda_cleanup_stream() properly for slaves at closing. The patch fixes both issues. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:34 UTC |
| ddc0f38 | Matthew Ranostay | 25 September 2008, 13:17:11 UTC | ALSA: hda: slave_dig_outs code block in wrong location Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:33 UTC |
| 37c34ff | Takashi Iwai | 24 September 2008, 07:59:44 UTC | ALSA: intel8x0 - Add quirk for Fujitsu Lifebook P7010 Fujitsu Lifebook P7010 requires ac97_quirk=hp_only. http://bugzilla.kernel.org/show_bug.cgi?id=9100 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:32 UTC |
| a99606d | Takashi Iwai | 24 September 2008, 07:44:18 UTC | ALSA: Remove bitwise from snd_pcm_hw_param_t We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:30 UTC |
| fedb756 | Matthew Ranostay | 24 September 2008, 01:46:30 UTC | ALSA: hda: use last DAC defined for hp_pin Patch allows the last DAC in the dac_nids for the hp_nid if there is an available one this isn't in use by a line_out entry or if hp_nid isn't already defined. This solves the issues with the 'Headphone Playback' mixer controls on the 92hd73xxx branch and possibly others. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 10 October 2008, 11:41:27 UTC |
| cdad5b8 | Clemens Ladisch | 24 September 2008, 13:25:28 UTC | ALSA: oxygen: wait for ACK when resetting UART After sending a reset command to the UART, wait some time for the ACK to be generated (and to be read and dropped by the interrupt handler) before sending the next command. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 24 September 2008, 13:25:28 UTC |
| ba8ed12 | Jean Delvare | 22 September 2008, 12:15:53 UTC | ALSA: ASoC: Convert tlv320aic3x to a new-style i2c driver (v2) Convert the tlv320aic3x codec driver to the new (standard) device driver binding model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:26 UTC |
| b69ce01 | Herton Ronaldo Krzesinski | 18 September 2008, 19:41:49 UTC | ALSA: hda - Fix ALC662 DAC mixer mutes also for auto config model In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I missed to fix the mixer mute switches also for the auto config model of ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE" when available will work too with "auto" model. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:23 UTC |
| 9c95c43 | David Woodhouse | 18 September 2008, 20:37:13 UTC | ALSA: hda - Add PCI subsystem ID for MacBookPro4,1 This seems to work if I tell it that it's a mbp3. Not sure if there are actually any differences. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:21 UTC |
| 6597363 | Matthew Ranostay | 16 September 2008, 14:39:37 UTC | ALSA: hda: SPDIF mux fixes for STAC927x Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels pointer for custom SPDIF mux labels for non-standard codec connections. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:20 UTC |
| 2f3dfaf | Mark Brown | 16 September 2008, 11:51:26 UTC | sound: ASoC: Add WM8750 SPI support Implement SPI support for WM8750, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Also fix a cut'n'pasted comment in the I2C side of the driver (which was clearly written in the same way) while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:19 UTC |
| ccbc301 | Mark Brown | 15 September 2008, 14:51:13 UTC | sound: ASoC: DAPM support for ADC on WM9713 PCM interface The stereo ADC in the WM9713 can be used to produce data for both the standard AC97 interface and the additional voice PCM interface. Support use on both by defining virtual ADCs tied to each accepting the output from the actual ADCs. Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:18 UTC |
| db84537 | Mark Brown | 15 September 2008, 14:57:36 UTC | sound: ASoC: Fix dependency on AC97_BUS When built with AC97 support the ASoC core depends on AC97_BUS so force it to be available Kconfig. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:16 UTC |
| d742632 | Harald Welte | 15 September 2008, 14:43:23 UTC | ALSA: HDA VIA: Replace buggy Mic Boost VT1708S' Mic Boost should be hidden in hardware design according to some customers' requirements. However, in case of bugs, it has to be exhibited to normal users, so we need to: * open a software backdoor, which is disabled by default in hardware * re-write .tlv & .info, to indicate the actual necessary info, which we cannot get from amplifier's capabiliies Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:15 UTC |
| 5691ec7 | Harald Welte | 15 September 2008, 14:42:26 UTC | ALSA: HDA VIA: Fix 2nd S/PDIF out function As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output is not working with alsa-kernel 1.0.18rc3. This patch makes it work by * activating the second S/PDIF output pin in the pin config * consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare() functions * remove the need for an extra hda_pcm_stream structure and rather represents the second digital output as substream within the primary S/PDIF digital out stream. Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:13 UTC |
| f8fdd49 | Harald Welte | 15 September 2008, 14:41:31 UTC | ALSA: HDA VIA: Fix crash on codecs without Headphone Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist), to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will reference hp_mux. Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:11 UTC |
| a6d7731 | Dmitry Baryshkov | 10 September 2008, 01:01:20 UTC | ALSA: Separate common pxa2xx-pcm code ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code. Move it to pxa2xx-lib. [Fixed some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:10 UTC |
| 9d1cf39 | Dmitry Baryshkov | 10 September 2008, 01:01:18 UTC | ALSA: pxa2xx-ac97-lib: support building for several CPUs Support building of pxa2xx-ac97-lib for several CPUs by making code run-time selected, not only compile-time. [Fixed 3XX->3xx typos in ifdef checks -- broonie.] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:09 UTC |
| 9c63634 | Dmitry Baryshkov | 10 September 2008, 01:01:17 UTC | ALSA: Separate common pxa2xx-ac97 code ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code. Move all common code into separate module snd-pxa2xx-lib. [Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:08 UTC |
| 081b355 | Dmitry Baryshkov | 10 September 2008, 01:01:19 UTC | sound: ASoC: Support runtime selection of CPU in pxa2xx-i2s Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:07 UTC |
| 8bae3e2 | Kenneth Kiraly | 10 September 2008, 18:33:32 UTC | sound: ASoC: Add WM8971 CODEC driver The WM8971 is a low power, high quality stereo codec designed for portable digital audio applications. This driver was originally written by Kenneth Kiraly. While out of tree it has had updates to reflect current kernel APIs and coding standards from Graeme Gregory and Mark Brown. Signed-off-by: Kenneth Kiraly <kiraly@lab126.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:05 UTC |
| f51ff99 | Robin H. Johnson | 13 September 2008, 23:55:01 UTC | ALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards. Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus on their Asus P5Q Premium and Pro boards. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:04 UTC |
| 9cae0c6 | Robin H. Johnson | 13 September 2008, 23:54:58 UTC | ALSA: HDA: patch_analog: Implement multiple outputs for AD1988 Implement the slave_dig_outs for AD1989 cards. Untested due to lack of hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:03 UTC |
| 0481f45 | Robin H. Johnson | 13 September 2008, 23:54:57 UTC | ALSA: HDA: hda_proc: Fix printf format specifier The Pincap output had a typod format specifier, leading to an extraneous "08" in the output, which is a reserved bit of the Vref field, and was really confused :-). Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:02 UTC |
| 35e8901 | Robin H. Johnson | 13 September 2008, 23:54:59 UTC | ALSA: HDA: hda_local: Less magic numbers. Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF issue. Maybe should just use the expanded form directly in the verbs? Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:01 UTC |
| e8bfc6c | Robin H. Johnson | 13 September 2008, 23:55:00 UTC | ALSA: HDA: patch_analog: Fix SPDIF output on AD1989B The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they actually work. Also initialize the HDMI SPDIF at the same time. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:18:00 UTC |
| 2a9c781 | Matthew Ranostay | 13 September 2008, 20:45:39 UTC | ALSA: hda: 92hd73xx fixes Added support for defining the number of amps and the creation of the private_dimux dynamically for the 92hd73xx codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> [Fixed a typo by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:59 UTC |
| 418c8f8 | Uwe Kleine-König | 14 September 2008, 19:32:33 UTC | ALSA: Fix section for snd-aica platform driver Don't use __init but __devinit to define probe function. A pointer to snd_aica_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_AICA=m the following probably oopses: echo -n AICA > /sys/bus/platform/driver/AICA/unbind echo -n AICA > /sys/bus/platform/driver/AICA/bind Strange enough add_aicamixer_controls which is only called by snd_aica_probe was already using __devinit. While at it move the remove function to .devexit.text section. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:58 UTC |
| f7cf0a7 | Matthew Ranostay | 13 September 2008, 14:36:58 UTC | ALSA: hda: fixed hp_nid DAC for DELL_M6 This patch sets the HP out not used by the "Headphone to Line Out" switch to the hp_nid. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:57 UTC |
| 8938503 | Matthew Ranostay | 11 September 2008, 13:49:39 UTC | ALSA: hda: Input port AMP controls Added support for controlling hardware gain amps on input ports using a volume control mixer with a mux selecting the port being controlled. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:56 UTC |
| 6a14f58 | Matthew Ranostay | 12 September 2008, 16:02:30 UTC | ALSA: hda: Added a STAC_HP_M4 quirk Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:55 UTC |
| 9932fbb | Herton Ronaldo Krzesinski | 13 September 2008, 14:44:29 UTC | ALSA: hda: fix oopses in snd-hda-intel after digital slave support additions Many places fail to check if codec has slave_dig_outs entries (the most common case is not having any entry), leading to various possible oopses in hda_codec code. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:54 UTC |
| 8569be3 | Alan Horstmann | 09 September 2008, 18:25:49 UTC | sound: ASoC: Fix WM8731 SPI write Ensure wm8731_spi_write byte order is consistent regardless of endianess. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 23 September 2008, 06:17:53 UTC |
| 7407a2e | Clemens Ladisch | 22 September 2008, 07:12:11 UTC | ALSA: virtuoso: add Xonar HDAV1.3 support Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:12:11 UTC |
| 79c50e2 | Clemens Ladisch | 22 September 2008, 07:07:53 UTC | ALSA: oxygen: rename first PCM device Rename the first PCM device from "Analog" to "Multichannel" because it can be used for HDMI output on the Xonar HDAV. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:07:53 UTC |
| c871c4a | Clemens Ladisch | 22 September 2008, 07:07:20 UTC | ALSA: virtuoso: rename AC97 callback function Rename the callback function that switches between line and mic inputs on the Xonar D1 because it is also usable on other models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:07:20 UTC |
| 70c27d3 | Clemens Ladisch | 22 September 2008, 07:06:38 UTC | ALSA: virtuoso: make number of PCM1796 DACs configurable Do not use a hardcoded number when iterating over the PCM1796 DACs to allow for cards with a different number of analog output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:06:38 UTC |
| 4f50d2f | Clemens Ladisch | 22 September 2008, 07:06:04 UTC | ALSA: virtuoso: allow I2C-connected PCM1796 Add support for PCM1796 chips that are connected with an I2C bus instead of SPI. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:06:04 UTC |
| c2bc4ff | Clemens Ladisch | 22 September 2008, 07:05:29 UTC | ALSA: oxygen: add self-documenting functions Introduce some trivial functions to better document the relationships of the various model callbacks. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:05:29 UTC |
| 397b1dc | Clemens Ladisch | 22 September 2008, 07:04:43 UTC | ALSA: oxygen: add UART I/O functions Add functions to allow model drivers to communicate with external chips by doing I/O with the not-used-for-MIDI UART. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:04:43 UTC |
| dbbbd67 | Clemens Ladisch | 22 September 2008, 07:03:42 UTC | ALSA: oxygen: configure MIDI via device_config To enable the MIDI port, model drivers must now set flags in device_config, not only in misc_flags. This allows model drivers to enable the UART without creating an ALSA MIDI device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:03:42 UTC |
| d76596b | Clemens Ladisch | 22 September 2008, 07:02:08 UTC | ALSA: oxygen: rename pcm_dev_cfg Rename the pcm_dev_cfg field to device_config because there will be additional flags that do not describe PCM devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:02:08 UTC |
| c3f0073 | Clemens Ladisch | 22 September 2008, 07:01:11 UTC | ALSA: virtuoso: create common functions for GPIO bit switch controls Factor out the common code of the mixer callbacks that handle controls that just switch a single GPIO bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:01:11 UTC |
| fe10662 | Clemens Ladisch | 22 September 2008, 07:00:30 UTC | ALSA: virtuoso: handle D2X/DX dynamically The Xonar D2X and DX are very similar to the D2 and D1, respectively, so we can handle the differences dynamically instead of using a separate model structure for each one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 07:00:30 UTC |
| 4bd0c3a | Clemens Ladisch | 22 September 2008, 06:59:18 UTC | ALSA: oxygen: handle X-Meridian dynamically Handle the differences between the X-Meridian and the other models in the probe callback instead of using a second model structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 06:59:18 UTC |
| 2f1b0ec | Clemens Ladisch | 22 September 2008, 06:57:24 UTC | ALSA: oxygen: remove X-Meridian magic number Introduce symbols that indicate the two models handled by the snd-oxygen driver, instead of using a magic number. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 06:57:24 UTC |
| 568c59e | Clemens Ladisch | 22 September 2008, 06:56:01 UTC | ALSA: oxygen: add probe callback Add a probe callback to the model structure so that model-specific drivers can refine their model detection before the card is initialized. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 06:56:01 UTC |
| 9bd6a73 | Clemens Ladisch | 22 September 2008, 06:55:19 UTC | ALSA: oxygen: use a copy of the model struct Put a copy of the model structure into the chip structure so that model- specific drivers can modify it depending on a particular device instance. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 06:55:19 UTC |
| 6627bea | Clemens Ladisch | 22 September 2008, 06:53:31 UTC | ALSA: oxygen: use SPDIF channel status symbols When setting the SPDIF channel status sample rate field, use the recently defined symbols instead of magic numbers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 22 September 2008, 06:53:31 UTC |
| 8f0d836 | Jaroslav Kysela | 09 September 2008, 16:55:25 UTC | ALSA: Release v1.0.18rc3 Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:55:25 UTC |
| 98aa34c | Harald Welte | 09 September 2008, 08:02:09 UTC | ALSA: HDA patch_via.c: Second S/PDIF (HDMI) support The VT1702 and VT1708S have a second S/PDIF output which is used to connect to a HDMI transmitter. This patch adds support for it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:52:04 UTC |
| 0aa62ae | Harald Welte | 09 September 2008, 07:58:27 UTC | ALSA: HDA patch_via.c: Independent DAC for headphone This mode allows an output stream to have two substreams, one for the speakers and one for the headphone. Each of the substreams has independent PCM data and uses a different DAC. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:52:03 UTC |
| 69e52a8 | Harald Welte | 09 September 2008, 07:57:32 UTC | ALSA: HDA patch_via.c: Mute on headphone plug-in Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:52:02 UTC |
| d949cac | Harald Welte | 09 September 2008, 07:56:01 UTC | ALSA: HDA patch_via.c: Add VT1708S and VT1702 support The VT1702 and VT1708S codecs are new HDA codecs by VIA. This patch adds support for them to the patch_via.c file for HDA Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:52:01 UTC |
| fb4cb77 | Harald Welte | 09 September 2008, 07:53:36 UTC | ALSA: HDA patch_via.c: Fix inversion of surround and side channels In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:52:00 UTC |
| 76d9b0d | Harald Welte | 09 September 2008, 07:50:37 UTC | ALSA: HDA patch_via.c: HP and CD pin connect config Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:51:59 UTC |
| eb14a46 | Harald Welte | 09 September 2008, 07:40:38 UTC | ALSA: HDA patch_via.c: cleanup * add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:51:58 UTC |
| e8f18ae | Uwe Kleine-König | 09 September 2008, 11:47:11 UTC | ALSA: fix section for sa11xx-uda1341 platform driver Don't use __init but __devinit to define probe function. A pointer to sa11xx_uda1341_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following probably oopses: echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:51:56 UTC |
| e99d32b | Matthew Ranostay | 09 September 2008, 08:46:38 UTC | ALSA: hda - add missing slave_dig_outs for 92HD73bxx Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 16:51:51 UTC |
| e348797 | Matthew Ranostay | 08 September 2008, 15:36:59 UTC | ALSA: hda: SPDIF mux name change Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match the coding style. Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:12:01 UTC |
| 0ffa980 | Matthew Ranostay | 08 September 2008, 15:20:05 UTC | ALSA: hda: digital slave support for IDT codecs Added slave_dig_outs entries for several IDT codecs that have multiple SPDIF outs, and enabled these SPDIF outs in several pin configs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:12:00 UTC |
| 6010b2d | Mark Brown | 06 September 2008, 17:33:24 UTC | ALSA: ASoC: Use codec digital mute when stopping playback Muting the DAC masks artefacts introduced as the digital stream shuts down, for example when the input stops being clocked. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:59 UTC |
| 3e86084 | Mark Brown | 06 September 2008, 17:11:51 UTC | ALSA: ASoC: Sort Kconfig and Makefile entries for codecs Hopefully this will make merges a little bit easier. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:58 UTC |
| d540de4 | Mark Brown | 05 September 2008, 21:40:49 UTC | ALSA: ASoC: Fix indentation in WM9713 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:57 UTC |
| de51ca1 | Matthew Ranostay | 07 September 2008, 18:31:40 UTC | ALSA: hda: slave digital out support Added support for playing a stream on multiple digital outs. This is done by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid). Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:55 UTC |
| de30d36 | Krzysztof Helt | 07 September 2008, 15:24:33 UTC | ALSA: fix section mismatch in the sound_core The __exit cleanup_oss_soundcore() is called from the __init init_soundcore(). This causes section mismatch and breaks kernel's linking on sparc64. Remove the __exit attribute from the cleanup_oss_soundcore(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:53 UTC |
| d800988 | Takashi Iwai | 07 September 2008, 10:51:13 UTC | ALSA: use correct lock in snd_ctl_dev_disconnect() The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock for protection of card->ctl_files entries, instead of card->controls_rwsem. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:48 UTC |
| 3d8cb46 | Alexander Beregalov | 07 September 2008, 10:17:02 UTC | ALSA: ice1712.c: fix coding style before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:46 UTC |
| 1de9fdc | Alexander Beregalov | 07 September 2008, 10:11:04 UTC | ALSA: ice1724.c: fix coding style before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:45 UTC |
| cc67b7f | Vedran Miletic | 07 September 2008, 10:00:02 UTC | ALSA: ice1712/ice1724: Coding style fixes part 1 (more coming up) Inspired by Alexander Beregalov's patches for wtm and aureon.c, I decided to run checkpatch on some more files. After some work checkpatch.pl-0.23 --no-tree --file --strict <file> reports 0 errors, 0 warnings, 0 checks, n lines checked for: phase.c phase.h juli.c (1 check about unused code, maybe we should comment it) juli.h (no changes necessary) In other files I have just fixed // comments and long lines along the way (but not all of them), more coming up. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:44 UTC |
| 07f455f | Matthew Ranostay | 07 September 2008, 10:04:17 UTC | ALSA: hda: removed unneeded hp_nid references Removed unneeded hp_nid references for 92hd73xx codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:42 UTC |
| d973775 | Matthew Ranostay | 07 September 2008, 10:03:41 UTC | ALSA: hda: SPDIF mux controls Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:41 UTC |
| f14d8e9 | Alexander Beregalov | 06 September 2008, 21:54:27 UTC | ALSA: ice1712/wtm: fix coding style before: total: 2 errors, 0 warnings, 20 lines checked total: 49 errors, 2 warnings, 518 lines checked after: total: 0 errors, 0 warnings, 20 lines checked total: 0 errors, 0 warnings, 518 lines checked Compile tested, size and code are equal. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:39 UTC |
| 1ce211a | Alexander Beregalov | 06 September 2008, 21:19:00 UTC | ALSA: ice1712/aureon.c: fix coding style before: total: 304 errors, 137 warnings, 2259 lines checked after: total: 0 errors, 121 warnings, 2284 lines checked Compile tested, size is different because of include was changed, but without that change md5sum is different because of cmp cx,dx/cmp dx,cx swap and __LINE__ was changed in printk function. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:37 UTC |
| 59fcbb6 | Cliff Cai | 05 September 2008, 10:21:34 UTC | sound: ASoC: Blackfin: Include Blackfin architecture support in build Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:28 UTC |
| 579e8ea | Cliff Cai | 05 September 2008, 10:21:42 UTC | sound: ASoC: Blackfin: add Blackfin arch ASoC Kconfig and Makefile Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:25 UTC |
| a7e7f54 | Cliff Cai | 05 September 2008, 10:21:41 UTC | sound: ASoC: Blackfin: board driver for SSM2602 sound chip Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:23 UTC |
| c4cf8c7 | Cliff Cai | 05 September 2008, 10:21:40 UTC | sound: ASoC: Blackfin: board driver for AD1980/1 audio codec Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:23 UTC |
| 912c2ac | Cliff Cai | 05 September 2008, 10:21:39 UTC | sound: ASoC: Blackfin: I2S CPU DAI driver [Additional coding standards fixes by Mark Brown.] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:21 UTC |
| 88740da | Cliff Cai | 05 September 2008, 10:21:38 UTC | sound: ASoC: Blackfin: DMA Driver for I2S sound chip Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:20 UTC |
| f202862 | Cliff Cai | 05 September 2008, 10:21:37 UTC | sound: ASoC: Blackfin: AC97 Blackfin CPU DAI driver Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:19 UTC |
| aff0510 | Cliff Cai | 05 September 2008, 10:21:36 UTC | sound: ASoC: Blackfin: DMA Driver for AC97 sound chip [Additional coding standards fixes by Mark Brown.] Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:18 UTC |
| 8c9c198 | Cliff Cai | 05 September 2008, 10:21:35 UTC | sound: ASoC: Blackfin: SPORT peripheral interface driver SPORT is a serial port which can support serveral serial communication protocols. It can be used as I2C/PCM/AC97. For further information, please look up the HRM. [Additional coding standards fixes by Mark Brown.] Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> | 09 September 2008, 07:11:17 UTC |
