Revision 2501aff8b7516115c409cb34cc50305cdde40a47 authored by Jeff King on 28 September 2013, 08:31:45 UTC, committed by Jonathan Nieder on 14 October 2013, 23:55:13 UTC
When we are handling a curl response code in http_request or in the remote-curl RPC code, we use the handle_curl_result helper to translate curl's response into an easy-to-use code. When we see an HTTP 401, we do one of two things: 1. If we already had a filled-in credential, we mark it as rejected, and then return HTTP_NOAUTH to indicate to the caller that we failed. 2. If we didn't, then we ask for a new credential and tell the caller HTTP_REAUTH to indicate that they may want to try again. Rejecting in the first case makes sense; it is the natural result of the request we just made. However, prompting for more credentials in the second step does not always make sense. We do not know for sure that the caller is going to make a second request, and nor are we sure that it will be to the same URL. Logically, the prompt belongs not to the request we just finished, but to the request we are (maybe) about to make. In practice, it is very hard to trigger any bad behavior. Currently, if we make a second request, it will always be to the same URL (even in the face of redirects, because curl handles the redirects internally). And we almost always retry on HTTP_REAUTH these days. The one exception is if we are streaming a large RPC request to the server (e.g., a pushed packfile), in which case we cannot restart. It's extremely unlikely to see a 401 response at this stage, though, as we would typically have seen it when we sent a probe request, before streaming the data. This patch drops the automatic prompt out of case 2, and instead requires the caller to do it. This is a few extra lines of code, and the bug it fixes is unlikely to come up in practice. But it is conceptually cleaner, and paves the way for better handling of credentials across redirects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
1 parent 1bbcc22
config.txt
CONFIGURATION FILE
------------------
The Git configuration file contains a number of variables that affect
the Git commands' behavior. The `.git/config` file in each repository
is used to store the configuration for that repository, and
`$HOME/.gitconfig` is used to store a per-user configuration as
fallback values for the `.git/config` file. The file `/etc/gitconfig`
can be used to store a system-wide default configuration.
The configuration variables are used by both the Git plumbing
and the porcelains. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive, allow only alphanumeric
characters and `-`, and must start with an alphabetic character. Some
variables may appear multiple times.
Syntax
~~~~~~
The syntax is fairly flexible and permissive; whitespaces are mostly
ignored. The '#' and ';' characters begin comments to the end of line,
blank lines are ignored.
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the next
section begins. Section names are not case sensitive. Only alphanumeric
characters, `-` and `.` are allowed in section names. Each variable
must belong to some section, which means that there must be a section
header before the first setting of a variable.
Sections can be further divided into subsections. To begin a subsection
put its name in double quotes, separated by space from the section name,
in the section header, like in the example below:
--------
[section "subsection"]
--------
Subsection names are case sensitive and can contain any characters except
newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
respectively). Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given subsection.
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
There is also a deprecated `[section.subsection]` syntax. With this
syntax, the subsection name is converted to lower-case and is also
compared case sensitively. These subsection names follow the same
restrictions as section names.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
The variable names are case-insensitive, allow only alphanumeric characters
and `-`, and must start with an alphabetic character. There can be more
than one value for a given variable; we say then that the variable is
multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
The values following the equals sign in variable assign are all either
a string, an integer, or a boolean. Boolean values may be given as yes/no,
1/0, true/false or on/off. Case is not significant in boolean values, when
converting value to the canonical form using '--bool' type specifier;
'git config' will ensure that the output is "true" or "false".
String values may be entirely or partially enclosed in double quotes.
You need to enclose variable values in double quotes if you want to
preserve leading or trailing whitespace, or if the variable value contains
comment characters (i.e. it contains '#' or ';').
Double quote `"` and backslash `\` characters in variable values must
be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
and `\b` for backspace (BS). No other char escape sequence, nor octal
char sequences are valid.
Variable values ending in a `\` are continued on the next line in the
customary UNIX fashion.
Some variables may require a special value format.
Includes
~~~~~~~~
You can include one config file from another by setting the special
`include.path` variable to the name of the file to be included. The
included file is expanded immediately, as if its contents had been
found at the location of the include directive. If the value of the
`include.path` variable is a relative path, the path is considered to be
relative to the configuration file in which the include directive was
found. The value of `include.path` is subject to tilde expansion: `~/`
is expanded to the value of `$HOME`, and `~user/` to the specified
user's home directory. See below for examples.
Example
~~~~~~~
# Core variables
[core]
; Don't trust file modes
filemode = false
# Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
[branch "devel"]
remote = origin
merge = refs/heads/devel
# Proxy settings
[core]
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
[include]
path = /path/to/foo.inc ; include by absolute path
path = foo ; expand "foo" relative to the current file
path = ~/foo ; expand "foo" in your $HOME directory
Variables
~~~~~~~~~
Note that this list is non-comprehensive and not necessarily complete.
For command-specific variables, you will find a more detailed description
in the appropriate manual page. You will find a description of non-core
porcelain configuration variables in the respective porcelain documentation.
advice.*::
These variables control various optional help messages designed to
aid new users. All 'advice.*' variables default to 'true', and you
can tell Git that you do not need help by setting these to 'false':
+
--
pushUpdateRejected::
Set this variable to 'false' if you want to disable
'pushNonFFCurrent', 'pushNonFFDefault',
'pushNonFFMatching', 'pushAlreadyExists',
'pushFetchFirst', and 'pushNeedsForce'
simultaneously.
pushNonFFCurrent::
Advice shown when linkgit:git-push[1] fails due to a
non-fast-forward update to the current branch.
pushNonFFDefault::
Advice to set 'push.default' to 'upstream' or 'current'
when you ran linkgit:git-push[1] and pushed 'matching
refs' by default (i.e. you did not provide an explicit
refspec, and no 'push.default' configuration was set)
and it resulted in a non-fast-forward error.
pushNonFFMatching::
Advice shown when you ran linkgit:git-push[1] and pushed
'matching refs' explicitly (i.e. you used ':', or
specified a refspec that isn't your current branch) and
it resulted in a non-fast-forward error.
pushAlreadyExists::
Shown when linkgit:git-push[1] rejects an update that
does not qualify for fast-forwarding (e.g., a tag.)
pushFetchFirst::
Shown when linkgit:git-push[1] rejects an update that
tries to overwrite a remote ref that points at an
object we do not have.
pushNeedsForce::
Shown when linkgit:git-push[1] rejects an update that
tries to overwrite a remote ref that points at an
object that is not a committish, or make the remote
ref point at an object that is not a committish.
statusHints::
Show directions on how to proceed from the current
state in the output of linkgit:git-status[1], in
the template shown when writing commit messages in
linkgit:git-commit[1], and in the help message shown
by linkgit:git-checkout[1] when switching branch.
statusUoption::
Advise to consider using the `-u` option to linkgit:git-status[1]
when the command takes more than 2 seconds to enumerate untracked
files.
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
merge to avoid overwriting local changes.
resolveConflict::
Advice shown by various commands when conflicts
prevent the operation from being performed.
implicitIdentity::
Advice on how to set your identity configuration when
your information is guessed from the system username and
domain name.
detachedHead::
Advice shown when you used linkgit:git-checkout[1] to
move to the detach HEAD state, to instruct how to create
a local branch after the fact.
amWorkDir::
Advice that shows the location of the patch file when
linkgit:git-am[1] fails to apply it.
rmHints::
In case of failure in the output of linkgit:git-rm[1],
show directions on how to proceed from the current state.
--
core.fileMode::
If false, the executable bit differences between the index and
the working tree are ignored; useful on broken filesystems like FAT.
See linkgit:git-update-index[1].
+
The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
will probe and set core.fileMode false if appropriate when the
repository is created.
core.ignorecase::
If true, this option enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
like FAT. For example, if a directory listing finds
"makefile" when Git expects "Makefile", Git will assume
it is really the same file, and continue to remember it as
"Makefile".
+
The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
will probe and set core.ignorecase true if appropriate when the repository
is created.
core.precomposeunicode::
This option is only used by Mac OS implementation of Git.
When core.precomposeunicode=true, Git reverts the unicode decomposition
of filenames done by Mac OS. This is useful when sharing a repository
between Mac OS and Linux or Windows.
(Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
When false, file names are handled fully transparent by Git,
which is backward compatible with older versions of Git.
core.trustctime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
is regularly modified by something outside Git (file system
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
core.checkstat::
Determines which stat fields to match between the index
and work tree. The user can set this to 'default' or
'minimal'. Default (or explicitly 'default'), is to check
all fields, including the sub-second part of mtime and ctime.
core.quotepath::
The commands that output paths (e.g. 'ls-files',
'diff'), when not given the `-z` option, will quote
"unusual" characters in the pathname by enclosing the
pathname in a double-quote pair and with backslashes the
same way strings in C source code are quoted. If this
variable is set to false, the bytes higher than 0x80 are
not quoted but output as verbatim. Note that double
quote, backslash and control characters are always
quoted without `-z` regardless of the setting of this
variable.
core.eol::
Sets the line ending type to use in the working directory for
files that have the `text` property set. Alternatives are
'lf', 'crlf' and 'native', which uses the platform's native
line ending. The default value is `native`. See
linkgit:gitattributes[5] for more information on end-of-line
conversion.
core.safecrlf::
If true, makes Git check if converting `CRLF` is reversible when
end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the
same file should yield the original file in the work tree. If
this is not the case for the current setting of
`core.autocrlf`, Git will reject the file. The variable can
be set to "warn", in which case Git will only warn about an
irreversible conversion but continue the operation.
+
CRLF conversion bears a slight chance of corrupting data.
When it is enabled, Git will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by Git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
+
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
Git that this file is binary and Git will handle the file
appropriately.
+
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
+
Note, this safety check does not mean that a checkout will generate a
file identical to the original file for a different setting of
`core.eol` and `core.autocrlf`, but only for the current one. For
example, a text file with `LF` would be accepted with `core.eol=lf`
and could later be checked out with `core.eol=crlf`, in which case the
resulting file would contain `CRLF`, although the original file
contained `LF`. However, in both work trees the line endings would be
consistent, that is either all `LF` or all `CRLF`, but never mixed. A
file with mixed line endings would be reported by the `core.safecrlf`
mechanism.
core.autocrlf::
Setting this variable to "true" is almost the same as setting
the `text` attribute to "auto" on all files except that text
files are not guaranteed to be normalized: files that contain
`CRLF` in the repository will not be touched. Use this
setting if you want to have `CRLF` line endings in your
working directory even though the repository does not have
normalized line endings. This variable can be set to 'input',
in which case no output conversion is performed.
core.symlinks::
If false, symbolic links are checked out as small plain files that
contain the link text. linkgit:git-update-index[1] and
linkgit:git-add[1] will not change the recorded type to regular
file. Useful on filesystems like FAT that do not support
symbolic links.
+
The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
will probe and set core.symlinks false if appropriate when the repository
is created.
core.gitProxy::
A "proxy command" to execute (as 'command host port') instead
of establishing direct connection to the remote server when
using the Git protocol for fetching. If the variable value is
in the "COMMAND for DOMAIN" format, the command is applied only
on hostnames ending with the specified domain string. This variable
may be set multiple times and is matched in the given order;
the first match wins.
+
Can be overridden by the 'GIT_PROXY_COMMAND' environment variable
(which always applies universally, without the special "for"
handling).
+
The special string `none` can be used as the proxy command to
specify that no proxy be used for a given domain pattern.
This is useful for excluding servers inside a firewall from
proxy use, while defaulting to a common proxy for external domains.
core.ignoreStat::
If true, commands which modify both the working tree and the index
will mark the updated paths with the "assume unchanged" bit in the
index. These marked files are then assumed to stay unchanged in the
working tree, until you mark them otherwise manually - Git will not
detect the file changes by lstat() calls. This is useful on systems
where those are very slow, such as Microsoft Windows.
See linkgit:git-update-index[1].
False by default.
core.preferSymlinkRefs::
Instead of the default "symref" format for HEAD
and other symbolic reference files, use symbolic links.
This is sometimes needed to work with old scripts that
expect HEAD to be a symbolic link.
core.bare::
If true this repository is assumed to be 'bare' and has no
working directory associated with it. If this is the case a
number of commands that require a working directory will be
disabled, such as linkgit:git-add[1] or linkgit:git-merge[1].
+
This setting is automatically guessed by linkgit:git-clone[1] or
linkgit:git-init[1] when the repository was created. By default a
repository that ends in "/.git" is assumed to be not bare (bare =
false), while all other repositories are assumed to be bare (bare
= true).
core.worktree::
Set the path to the root of the working tree.
This can be overridden by the GIT_WORK_TREE environment
variable and the '--work-tree' command line option.
The value can be an absolute path or relative to the path to
the .git directory, which is either specified by --git-dir
or GIT_DIR, or automatically discovered.
If --git-dir or GIT_DIR is specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified,
the current working directory is regarded as the top level
of your working tree.
+
Note that this variable is honored even when set in a configuration
file in a ".git" subdirectory of a directory and its value differs
from the latter directory (e.g. "/path/to/.git/config" has
core.worktree set to "/different/path"), which is most likely a
misconfiguration. Running Git commands in the "/path/to" directory will
still use "/different/path" as the root of the work tree and can cause
confusion unless you know what you are doing (e.g. you are creating a
read-only snapshot of the same index to a location different from the
repository's usual working tree).
core.logAllRefUpdates::
Enable the reflog. Updates to a ref <ref> is logged to the file
"$GIT_DIR/logs/<ref>", by appending the new and old
SHA-1, the date/time and the reason of the update, but
only when the file exists. If this configuration
variable is set to true, missing "$GIT_DIR/logs/<ref>"
file is automatically created for branch heads (i.e. under
refs/heads/), remote refs (i.e. under refs/remotes/),
note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
+
This information can be used to determine what commit
was the tip of a branch "2 days ago".
+
This value is true by default in a repository that has
a working directory associated with it, and false by
default in a bare repository.
core.repositoryFormatVersion::
Internal variable identifying the repository format and layout
version.
core.sharedRepository::
When 'group' (or 'true'), the repository is made shareable between
several users in a group (making sure all the files and objects are
group-writable). When 'all' (or 'world' or 'everybody'), the
repository will be readable by all users, additionally to being
group-shareable. When 'umask' (or 'false'), Git will use permissions
reported by umask(2). When '0xxx', where '0xxx' is an octal number,
files in the repository will have this mode value. '0xxx' will override
user's umask value (whereas the other options will only override
requested parts of the user's umask value). Examples: '0660' will make
the repo read/write-able for the owner and group, but inaccessible to
others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
repository that is group-readable but not group-writable.
See linkgit:git-init[1]. False by default.
core.warnAmbiguousRefs::
If true, Git will warn you if the ref name you passed it is ambiguous
and might match multiple refs in the repository. True by default.
core.compression::
An integer -1..9, indicating a default compression level.
-1 is the zlib default. 0 means no compression,
and 1..9 are various speed/size tradeoffs, 9 being slowest.
If set, this provides a default to other compression variables,
such as 'core.loosecompression' and 'pack.compression'.
core.loosecompression::
An integer -1..9, indicating the compression level for objects that
are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
slowest. If not set, defaults to core.compression. If that is
not set, defaults to 1 (best speed).
core.packedGitWindowSize::
Number of bytes of a pack file to map into memory in a
single mapping operation. Larger window sizes may allow
your system to process a smaller number of large pack files
more quickly. Smaller window sizes will negatively affect
performance due to increased calls to the operating system's
memory manager, but may improve performance when accessing
a large number of large pack files.
+
Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
be reasonable for all users/operating systems. You probably do
not need to adjust this value.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
core.packedGitLimit::
Maximum number of bytes to map simultaneously into memory
from pack files. If Git needs to access more than this many
bytes at once to complete an operation it will unmap existing
regions to reclaim virtual address space within the process.
+
Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
This should be reasonable for all users/operating systems, except on
the largest projects. You probably do not need to adjust this value.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
core.deltaBaseCacheLimit::
Maximum number of bytes to reserve for caching base objects
that may be referenced by multiple deltified objects. By storing the
entire decompressed base objects in a cache Git is able
to avoid unpacking and decompressing frequently used base
objects multiple times.
+
Default is 16 MiB on all platforms. This should be reasonable
for all users/operating systems, except on the largest projects.
You probably do not need to adjust this value.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
core.bigFileThreshold::
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files without
delta compression avoids excessive memory usage, at the
slight expense of increased disk usage.
+
Default is 512 MiB on all platforms. This should be reasonable
for most projects as source code and other text files can still
be delta compressed, but larger binary media files won't be.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
core.excludesfile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', Git looks into this file for patterns
of files which are not meant to be tracked. "`~/`" is expanded
to the value of `$HOME` and "`~user/`" to the specified user's
home directory. Its default value is $XDG_CONFIG_HOME/git/ignore.
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore
is used instead. See linkgit:gitignore[5].
core.askpass::
Some commands (e.g. svn and http interfaces) that interactively
ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the 'GIT_ASKPASS'
environment variable. If not set, fall back to the value of the
'SSH_ASKPASS' environment variable or, failing that, a simple password
prompt. The external program shall be given a suitable prompt as
command line argument and write the password on its STDOUT.
core.attributesfile::
In addition to '.gitattributes' (per-directory) and
'.git/info/attributes', Git looks into this file for attributes
(see linkgit:gitattributes[5]). Path expansions are made the same
way as for `core.excludesfile`. Its default value is
$XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not
set or empty, $HOME/.config/git/attributes is used instead.
core.editor::
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
core.commentchar::
Commands such as `commit` and `tag` that lets you edit
messages consider a line that begins with this character
commented, and removes them after the editor returns
(default '#').
sequence.editor::
Text editor used by `git rebase -i` for editing the rebase instruction file.
The value is meant to be interpreted by the shell when it is used.
It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
When not configured the default commit message editor is used instead.
core.pager::
The command that Git will use to paginate output. Can
be overridden with the `GIT_PAGER` environment
variable. Note that Git sets the `LESS` environment
variable to `FRSX` if it is unset when it runs the
pager. One can change these settings by setting the
`LESS` variable to some other value. Alternately,
these settings can be overridden on a project or
global basis by setting the `core.pager` option.
Setting `core.pager` has no effect on the `LESS`
environment variable behaviour above, so if you want
to override Git's default settings this way, you need
to be explicit. For example, to disable the S option
in a backward compatible manner, set `core.pager`
to `less -+S`. This will be passed to the shell by
Git, which will translate the final command to
`LESS=FRSX less -+S`.
core.whitespace::
A comma separated list of common whitespace problems to
notice. 'git diff' will use `color.diff.whitespace` to
highlight them, and 'git apply --whitespace=error' will
consider them as errors. You can prefix `-` to disable
any of them (e.g. `-trailing-space`):
+
* `blank-at-eol` treats trailing whitespaces at the end of the line
as an error (enabled by default).
* `space-before-tab` treats a space character that appears immediately
before a tab character in the initial indent part of the line as an
error (enabled by default).
* `indent-with-non-tab` treats a line that is indented with space
characters instead of the equivalent tabs as an error (not enabled by
default).
* `tab-in-indent` treats a tab character in the initial indent part of
the line as an error (not enabled by default).
* `blank-at-eof` treats blank lines added at the end of file as an error
(enabled by default).
* `trailing-space` is a short-hand to cover both `blank-at-eol` and
`blank-at-eof`.
* `cr-at-eol` treats a carriage-return at the end of line as
part of the line terminator, i.e. with it, `trailing-space`
does not trigger if the character before such a carriage-return
is not a whitespace (not enabled by default).
* `tabwidth=<n>` tells how many character positions a tab occupies; this
is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
errors. The default tab width is 8. Allowed values are 1 to 63.
core.fsyncobjectfiles::
This boolean will enable 'fsync()' when writing object files.
+
This is a total waste of time and effort on a filesystem that orders
data writes properly, but can be useful for filesystems that do not use
journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
core.preloadindex::
Enable parallel index preload for operations like 'git diff'
+
This can speed up operations like 'git diff' and 'git status' especially
on filesystems like NFS that have weak caching semantics and thus
relatively high IO latencies. With this set to 'true', Git will do the
index comparison to the filesystem data in parallel, allowing
overlapping IO's.
core.createObject::
You can set this to 'link', in which case a hardlink followed by
a delete of the source are used to make sure that object creation
will not overwrite existing objects.
+
On some file system/operating system combinations, this is unreliable.
Set this config setting to 'rename' there; However, This will remove the
check that makes sure that existing object files will not get overwritten.
core.notesRef::
When showing commit messages, also show notes which are stored in
the given ref. The ref must be fully qualified. If the given
ref does not exist, it is not an error but means that no
notes should be printed.
+
This setting defaults to "refs/notes/commits", and it can be overridden by
the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1].
core.sparseCheckout::
Enable "sparse checkout" feature. See section "Sparse checkout" in
linkgit:git-read-tree[1] for more information.
core.abbrev::
Set the length object names are abbreviated to. If unspecified,
many commands abbreviate to 7 hexdigits, which may not be enough
for abbreviated object names to stay unique for sufficiently long
time.
add.ignore-errors::
add.ignoreErrors::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
option of linkgit:git-add[1]. Older versions of Git accept only
`add.ignore-errors`, which does not follow the usual naming
convention for configuration variables. Newer versions of Git
honor `add.ignoreErrors` as well.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
after defining "alias.last = cat-file commit HEAD", the invocation
"git last" is equivalent to "git cat-file commit HEAD". To avoid
confusion and troubles with script usage, aliases that
hide existing Git commands are ignored. Arguments are split by
spaces, the usual shell quoting and escaping is supported.
quote pair and a backslash can be used to quote them.
+
If the alias expansion is prefixed with an exclamation point,
it will be treated as a shell command. For example, defining
"alias.new = !gitk --all --not ORIG_HEAD", the invocation
"git new" is equivalent to running the shell command
"gitk --all --not ORIG_HEAD". Note that shell commands will be
executed from the top-level directory of a repository, which may
not necessarily be the current directory.
'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix'
from the original current directory. See linkgit:git-rev-parse[1].
am.keepcr::
If true, git-am will call git-mailsplit for patches in mbox format
with parameter '--keep-cr'. In this case git-mailsplit will
not remove `\r` from lines ending with `\r\n`. Can be overridden
by giving '--no-keep-cr' from the command line.
See linkgit:git-am[1], linkgit:git-mailsplit[1].
apply.ignorewhitespace::
When set to 'change', tells 'git apply' to ignore changes in
whitespace, in the same way as the '--ignore-space-change'
option.
When set to one of: no, none, never, false tells 'git apply' to
respect all whitespace differences.
See linkgit:git-apply[1].
apply.whitespace::
Tells 'git apply' how to handle whitespaces, in the same way
as the '--whitespace' option. See linkgit:git-apply[1].
branch.autosetupmerge::
Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
starting point branch. Note that even if this option is not set,
this behavior can be chosen per-branch using the `--track`
and `--no-track` options. The valid settings are: `false` -- no
automatic setup is done; `true` -- automatic setup is done when the
starting point is a remote-tracking branch; `always` --
automatic setup is done when the starting point is either a
local branch or remote-tracking
branch. This option defaults to true.
branch.autosetuprebase::
When a new branch is created with 'git branch' or 'git checkout'
that tracks another branch, this variable tells Git to set
up pull to rebase instead of merge (see "branch.<name>.rebase").
When `never`, rebase is never automatically set to true.
When `local`, rebase is set to true for tracked branches of
other local branches.
When `remote`, rebase is set to true for tracked branches of
remote-tracking branches.
When `always`, rebase will be set to true for all tracking
branches.
See "branch.autosetupmerge" for details on how to set up a
branch to track another branch.
This option defaults to never.
branch.<name>.remote::
When on branch <name>, it tells 'git fetch' and 'git push'
which remote to fetch from/push to. The remote to push to
may be overridden with `remote.pushdefault` (for all branches).
The remote to push to, for the current branch, may be further
overridden by `branch.<name>.pushremote`. If no remote is
configured, or if you are not on any branch, it defaults to
`origin` for fetching and `remote.pushdefault` for pushing.
branch.<name>.pushremote::
When on branch <name>, it overrides `branch.<name>.remote` for
pushing. It also overrides `remote.pushdefault` for pushing
from branch <name>. When you pull from one place (e.g. your
upstream) and push to another place (e.g. your own publishing
repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this
option to override it for a specific branch.
branch.<name>.merge::
Defines, together with branch.<name>.remote, the upstream branch
for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
branch to merge and can also affect 'git push' (see push.default).
When in branch <name>, it tells 'git fetch' the default
refspec to be marked for merging in FETCH_HEAD. The value is
handled like the remote part of a refspec, and must match a
ref which is fetched from the remote given by
"branch.<name>.remote".
The merge information is used by 'git pull' (which at first calls
'git fetch') to lookup the default branch for merging. Without
this option, 'git pull' defaults to merge the first refspec fetched.
Specify multiple values to get an octopus merge.
If you wish to setup 'git pull' so that it merges into <name> from
another branch in the local repository, you can point
branch.<name>.merge to the desired branch, and use the special setting
`.` (a period) for branch.<name>.remote.
branch.<name>.mergeoptions::
Sets default options for merging into branch <name>. The syntax and
supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
supported.
branch.<name>.rebase::
When true, rebase the branch <name> on top of the fetched branch,
instead of merging the default branch from the default remote when
"git pull" is run. See "pull.rebase" for doing this in a non
branch-specific manner.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
for details).
branch.<name>.description::
Branch description, can be edited with
`git branch --edit-description`. Branch description is
automatically added in the format-patch cover letter or
request-pull summary.
browser.<tool>.cmd::
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs passed
as arguments. (See linkgit:git-web{litdd}browse[1].)
browser.<tool>.path::
Override the path for the given tool that may be used to
browse HTML help (see '-w' option in linkgit:git-help[1]) or a
working repository in gitweb (see linkgit:git-instaweb[1]).
clean.requireForce::
A boolean to make git-clean do nothing unless given -f
or -n. Defaults to true.
color.branch::
A boolean to enable/disable color in the output of
linkgit:git-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
only when the output is to a terminal. Defaults to false.
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
`current` (the current branch), `local` (a local branch),
`remote` (a remote-tracking branch in refs/remotes/),
`upstream` (upstream tracking branch), `plain` (other
refs).
+
The value for these configuration variables is a list of colors (at most
two) and attributes (at most one), separated by spaces. The colors
accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
`blink` and `reverse`. The first color given is the foreground; the
second is the background. The position of the attribute, if any,
doesn't matter.
color.diff::
Whether to use ANSI escape sequences to add color to patches.
If this is set to `always`, linkgit:git-diff[1],
linkgit:git-log[1], and linkgit:git-show[1] will use color
for all patches. If it is set to `true` or `auto`, those
commands will only use color when output is to the terminal.
Defaults to false.
+
This does not affect linkgit:git-format-patch[1] nor the
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
command line with the `--color[=<when>]` option.
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
of `plain` (context text), `meta` (metainformation), `frag`
(hunk header), 'func' (function in hunk header), `old` (removed lines),
`new` (added lines), `commit` (commit headers), or `whitespace`
(highlighting whitespace errors). The values of these variables may be
specified as in color.branch.<slot>.
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
branches, remote-tracking branches, tags, stash and HEAD, respectively.
color.grep::
When set to `always`, always highlight matches. When `false` (or
`never`), never. When set to `true` or `auto`, use color only
when the output is written to the terminal. Defaults to `false`.
color.grep.<slot>::
Use customized color for grep colorization. `<slot>` specifies which
part of the line to use the specified color, and is one of
+
--
`context`;;
non-matching text in context lines (when using `-A`, `-B`, or `-C`)
`filename`;;
filename prefix (when not using `-h`)
`function`;;
function name lines (when using `-p`)
`linenumber`;;
line number prefix (when using `-n`)
`match`;;
matching text
`selected`;;
non-matching text in selected lines
`separator`;;
separators between fields on a line (`:`, `-`, and `=`)
and between hunks (`--`)
--
+
The values of these variables may be specified as in color.branch.<slot>.
color.interactive::
When set to `always`, always use colors for interactive prompts
and displays (such as those used by "git-add --interactive" and
"git-clean --interactive"). When false (or `never`), never.
When set to `true` or `auto`, use colors only when the output is
to the terminal. Defaults to false.
color.interactive.<slot>::
Use customized color for 'git add --interactive' and 'git clean
--interactive' output. `<slot>` may be `prompt`, `header`, `help`
or `error`, for four distinct types of normal output from
interactive commands. The values of these variables may be
specified as in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
use (default is true).
color.showbranch::
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
only when the output is to a terminal. Defaults to false.
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
only when the output is to a terminal. Defaults to false.
color.status.<slot>::
Use customized color for status colorization. `<slot>` is
one of `header` (the header text of the status message),
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
`untracked` (files which are not tracked by Git),
`branch` (the current branch), or
`nobranch` (the color the 'no branch' warning is shown in, defaulting
to red). The values of these variables may be specified as in
color.branch.<slot>.
color.ui::
This variable determines the default value for variables such
as `color.diff` and `color.grep` that control the use of color
per command family. Its scope will expand as more commands learn
configuration to set a default for the `--color` option. Set it
to `false` or `never` if you prefer Git commands not to use
color unless enabled explicitly with some other configuration
or the `--color` option. Set it to `always` if you want all
output not intended for machine consumption to use color, to
`true` or `auto` (this is the default since Git 1.8.4) if you
want such output to use color when written to the terminal.
column.ui::
Specify whether supported commands should output in columns.
This variable consists of a list of tokens separated by spaces
or commas:
+
These options control when the feature should be enabled
(defaults to 'never'):
+
--
`always`;;
always show in columns
`never`;;
never show in columns
`auto`;;
show in columns if the output is to the terminal
--
+
These options control layout (defaults to 'column'). Setting any
of these implies 'always' if none of 'always', 'never', or 'auto' are
specified.
+
--
`column`;;
fill columns before rows
`row`;;
fill rows before columns
`plain`;;
show in one column
--
+
Finally, these options can be combined with a layout option (defaults
to 'nodense'):
+
--
`dense`;;
make unequal size columns to utilize more space
`nodense`;;
make equal size columns
--
column.branch::
Specify whether to output branch listing in `git branch` in columns.
See `column.ui` for details.
column.clean::
Specify the layout when list items in `git clean -i`, which always
shows files and directories in columns. See `column.ui` for details.
column.status::
Specify whether to output untracked files in `git status` in columns.
See `column.ui` for details.
column.tag::
Specify whether to output tag listing in `git tag` in columns.
See `column.ui` for details.
commit.cleanup::
This setting overrides the default of the `--cleanup` option in
`git commit`. See linkgit:git-commit[1] for details. Changing the
default can be useful when you always want to keep lines that begin
with comment character `#` in your log message, in which case you
would do `git config commit.cleanup whitespace` (note that you will
have to remove the help lines that begin with `#` in the commit log
template yourself, if you do this).
commit.status::
A boolean to enable/disable inclusion of status information in the
commit message template when using an editor to prepare the commit
message. Defaults to true.
commit.template::
Specify a file to use as the template for new commit messages.
"`~/`" is expanded to the value of `$HOME` and "`~user/`" to the
specified user's home directory.
credential.helper::
Specify an external helper to be called when a username or
password credential is needed; the helper may consult external
storage to avoid prompting the user for the credentials. See
linkgit:gitcredentials[7] for details.
credential.useHttpPath::
When acquiring credentials, consider the "path" component of an http
or https URL to be important. Defaults to false. See
linkgit:gitcredentials[7] for more information.
credential.username::
If no username is set for a network authentication, use this username
by default. See credential.<context>.* below, and
linkgit:gitcredentials[7].
credential.<url>.*::
Any of the credential.* options above can be applied selectively to
some credentials. For example "credential.https://example.com.username"
would set the default username only for https connections to
example.com. See linkgit:gitcredentials[7] for details on how URLs are
matched.
include::diff-config.txt[]
difftool.<tool>.path::
Override the path for the given tool. This is useful in case
your tool is not in the PATH.
difftool.<tool>.cmd::
Specify the command to invoke the specified diff tool.
The specified command is evaluated in shell with the following
variables available: 'LOCAL' is set to the name of the temporary
file containing the contents of the diff pre-image and 'REMOTE'
is set to the name of the temporary file containing the contents
of the diff post-image.
difftool.prompt::
Prompt before each invocation of the diff tool.
fetch.recurseSubmodules::
This option can be either set to a boolean value or to 'on-demand'.
Setting it to a boolean changes the behavior of fetch and pull to
unconditionally recurse into submodules when set to true or to not
recurse at all when set to false. When set to 'on-demand' (the default
value), fetch and pull will only recurse into a populated submodule
when its superproject retrieves a commit that updates the submodule's
reference.
fetch.fsckObjects::
If it is set to true, git-fetch-pack will check all fetched
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
Defaults to false. If not set, the value of `transfer.fsckObjects`
is used instead.
fetch.unpackLimit::
If the number of objects fetched over the Git native
transfer is below this
limit, then the objects will be unpacked into loose object
files. However if the number of received objects equals or
exceeds this limit then the received pack will be stored as
a pack, after adding any missing delta bases. Storing the
pack from a push can make the push operation complete faster,
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
format.attach::
Enable multipart/mixed attachments as the default for
'format-patch'. The value can also be a double quoted string
which will enable attachments as the default and set the
value as the boundary. See the --attach option in
linkgit:git-format-patch[1].
format.numbered::
A boolean which can enable or disable sequence numbers in patch
subjects. It defaults to "auto" which enables it only if there
is more than one patch. It can be enabled or disabled for all
messages by setting it to "true" or "false". See --numbered
option in linkgit:git-format-patch[1].
format.headers::
Additional email headers to include in a patch to be submitted
by mail. See linkgit:git-format-patch[1].
format.to::
format.cc::
Additional recipients to include in a patch to be submitted
by mail. See the --to and --cc options in
linkgit:git-format-patch[1].
format.subjectprefix::
The default for format-patch is to output files with the '[PATCH]'
subject prefix. Use this variable to change that prefix.
format.signature::
The default for format-patch is to output a signature containing
the Git version number. Use this variable to change that default.
Set this variable to the empty string ("") to suppress
signature generation.
format.suffix::
The default for format-patch is to output files with the suffix
`.patch`. Use this variable to change that suffix (make sure to
include the dot if you want it).
format.pretty::
The default pretty format for log/show/whatchanged command,
See linkgit:git-log[1], linkgit:git-show[1],
linkgit:git-whatchanged[1].
format.thread::
The default threading style for 'git format-patch'. Can be
a boolean value, or `shallow` or `deep`. `shallow` threading
makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
`--in-reply-to`, and the first patch mail, in this order.
`deep` threading makes every mail a reply to the previous one.
A true boolean value is the same as `shallow`, and a false
value disables threading.
format.signoff::
A boolean value which lets you enable the `-s/--signoff` option of
format-patch by default. *Note:* Adding the Signed-off-by: line to a
patch should be a conscious act and means that you certify you have
the rights to submit this work under the same open source license.
Please see the 'SubmittingPatches' document for further discussion.
format.coverLetter::
A boolean that controls whether to generate a cover-letter when
format-patch is invoked, but in addition can be set to "auto", to
generate a cover-letter only when there's more than one patch.
filter.<driver>.clean::
The command which is used to convert the content of a worktree
file to a blob upon checkin. See linkgit:gitattributes[5] for
details.
filter.<driver>.smudge::
The command which is used to convert the content of a blob
object to a worktree file upon checkout. See
linkgit:gitattributes[5] for details.
gc.aggressiveWindow::
The window size parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
to 250.
gc.auto::
When there are approximately more than this many loose
objects in the repository, `git gc --auto` will pack them.
Some Porcelain commands use this command to perform a
light-weight garbage collection from time to time. The
default value is 6700. Setting this to 0 disables it.
gc.autopacklimit::
When there are more than this many packs that are not
marked with `*.keep` file in the repository, `git gc
--auto` consolidates them into one larger pack. The
default value is 50. Setting this to 0 disables it.
gc.packrefs::
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines whether
'git gc' runs `git pack-refs`. This can be set to `notbare`
to enable it within all non-bare repos or it can be set to a
boolean value. The default is `true`.
gc.pruneexpire::
When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately.
gc.reflogexpire::
gc.<pattern>.reflogexpire::
'git reflog expire' removes reflog entries older than
this time; defaults to 90 days. With "<pattern>" (e.g.
"refs/stash") in the middle the setting applies only to
the refs that match the <pattern>.
gc.reflogexpireunreachable::
gc.<ref>.reflogexpireunreachable::
'git reflog expire' removes reflog entries older than
this time and are not reachable from the current tip;
defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
in the middle, the setting applies only to the refs that
match the <pattern>.
gc.rerereresolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days. See linkgit:git-rerere[1].
gc.rerereunresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days. See linkgit:git-rerere[1].
gitcvs.commitmsgannotation::
Append this string to each commit message. Set to empty string
to disable this feature. Defaults to "via git-CVS emulator".
gitcvs.enabled::
Whether the CVS server interface is enabled for this repository.
See linkgit:git-cvsserver[1].
gitcvs.logfile::
Path to a log file where the CVS server interface well... logs
various stuff. See linkgit:git-cvsserver[1].
gitcvs.usecrlfattr::
If true, the server will look up the end-of-line conversion
attributes for files to determine the '-k' modes to use. If
the attributes force Git to treat a file as text,
the '-k' mode will be left blank so CVS clients will
treat it as text. If they suppress text conversion, the file
will be set with '-kb' mode, which suppresses any newline munging
the client might otherwise do. If the attributes do not allow
the file type to be determined, then 'gitcvs.allbinary' is
used. See linkgit:gitattributes[5].
gitcvs.allbinary::
This is used if 'gitcvs.usecrlfattr' does not resolve
the correct '-kb' mode to use. If true, all
unresolved files are sent to the client in
mode '-kb'. This causes the client to treat them
as binary files, which suppresses any newline munging it
otherwise might do. Alternatively, if it is set to "guess",
then the contents of the file are examined to decide if
it is binary, similar to 'core.autocrlf'.
gitcvs.dbname::
Database used by git-cvsserver to cache revision information
derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver) this
is a filename. Supports variable substitution (see
linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
Default: '%Ggitcvs.%m.sqlite'
gitcvs.dbdriver::
Used Perl DBI driver. You can specify any available driver
for this here, but it might not work. git-cvsserver is tested
with 'DBD::SQLite', reported to work with 'DBD::Pg', and
reported *not* to work with 'DBD::mysql'. Experimental feature.
May not contain double colons (`:`). Default: 'SQLite'.
See linkgit:git-cvsserver[1].
gitcvs.dbuser, gitcvs.dbpass::
Database user and password. Only useful if setting 'gitcvs.dbdriver',
since SQLite has no concept of database users and/or passwords.
'gitcvs.dbuser' supports variable substitution (see
linkgit:git-cvsserver[1] for details).
gitcvs.dbTableNamePrefix::
Database table name prefix. Prepended to the names of any
database tables used, allowing a single database to be used
for several repositories. Supports variable substitution (see
linkgit:git-cvsserver[1] for details). Any non-alphabetic
characters will be replaced with underscores.
All gitcvs variables except for 'gitcvs.usecrlfattr' and
'gitcvs.allbinary' can also be specified as
'gitcvs.<access_method>.<varname>' (where 'access_method'
is one of "ext" and "pserver") to make them apply only for the given
access method.
gitweb.category::
gitweb.description::
gitweb.owner::
gitweb.url::
See linkgit:gitweb[1] for description.
gitweb.avatar::
gitweb.blame::
gitweb.grep::
gitweb.highlight::
gitweb.patches::
gitweb.pickaxe::
gitweb.remote_heads::
gitweb.showsizes::
gitweb.snapshot::
See linkgit:gitweb.conf[5] for description.
grep.lineNumber::
If set to true, enable '-n' option by default.
grep.patternType::
Set the default matching behavior. Using a value of 'basic', 'extended',
'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp',
'--fixed-strings', or '--perl-regexp' option accordingly, while the
value 'default' will return to the default matching behavior.
grep.extendedRegexp::
If set to true, enable '--extended-regexp' option by default. This
option is ignored when the 'grep.patternType' option is set to a value
other than 'default'.
gpg.program::
Use this custom program instead of "gpg" found on $PATH when
making or verifying a PGP signature. The program must support the
same command line interface as GPG, namely, to verify a detached
signature, "gpg --verify $file - <$signature" is run, and the
program is expected to signal a good signature by exiting with
code 0, and to generate an ascii-armored detached signature, the
standard input of "gpg -bsau $key" is fed with the contents to be
signed, and the program is expected to send the result to its
standard output.
gui.commitmsgwidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
gui.diffcontext::
Specifies how many context lines should be used in calls to diff
made by the linkgit:git-gui[1]. The default is "5".
gui.encoding::
Specifies the default encoding to use for displaying of
file contents in linkgit:git-gui[1] and linkgit:gitk[1].
It can be overridden by setting the 'encoding' attribute
for relevant files (see linkgit:gitattributes[5]).
If this option is not set, the tools default to the
locale encoding.
gui.matchtrackingbranch::
Determines if new branches created with linkgit:git-gui[1] should
default to tracking remote branches with matching names or
not. Default: "false".
gui.newbranchtemplate::
Is used as suggested name when creating new branches using the
linkgit:git-gui[1].
gui.pruneduringfetch::
"true" if linkgit:git-gui[1] should prune remote-tracking branches when
performing a fetch. The default value is "false".
gui.trustmtime::
Determines if linkgit:git-gui[1] should trust the file modification
timestamp or not. By default the timestamps are not trusted.
gui.spellingdictionary::
Specifies the dictionary used for spell checking commit messages in
the linkgit:git-gui[1]. When set to "none" spell checking is turned
off.
gui.fastcopyblame::
If true, 'git gui blame' uses `-C` instead of `-C -C` for original
location detection. It makes blame significantly faster on huge
repositories at the expense of less thorough copy detection.
gui.copyblamethreshold::
Specifies the threshold to use in 'git gui blame' original location
detection, measured in alphanumeric characters. See the
linkgit:git-blame[1] manual for more information on copy detection.
gui.blamehistoryctx::
Specifies the radius of history context in days to show in
linkgit:gitk[1] for the selected commit, when the `Show History
Context` menu item is invoked from 'git gui blame'. If this
variable is set to zero, the whole history is shown.
guitool.<name>.cmd::
Specifies the shell command line to execute when the corresponding item
of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
mandatory for every tool. The command is executed from the root of
the working directory, and in the environment it receives the name of
the tool as 'GIT_GUITOOL', the name of the currently selected file as
'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
the head is detached, 'CUR_BRANCH' is empty).
guitool.<name>.needsfile::
Run the tool only if a diff is selected in the GUI. It guarantees
that 'FILENAME' is not empty.
guitool.<name>.noconsole::
Run the command silently, without creating a window to display its
output.
guitool.<name>.norescan::
Don't rescan the working directory for changes after the tool
finishes execution.
guitool.<name>.confirm::
Show a confirmation dialog before actually running the tool.
guitool.<name>.argprompt::
Request a string argument from the user, and pass it to the tool
through the 'ARGS' environment variable. Since requesting an
argument implies confirmation, the 'confirm' option has no effect
if this is enabled. If the option is set to 'true', 'yes', or '1',
the dialog uses a built-in generic prompt; otherwise the exact
value of the variable is used.
guitool.<name>.revprompt::
Request a single valid revision from the user, and set the
'REVISION' environment variable. In other aspects this option
is similar to 'argprompt', and can be used together with it.
guitool.<name>.revunmerged::
Show only unmerged branches in the 'revprompt' subdialog.
This is useful for tools similar to merge or rebase, but not
for things like checkout or reset.
guitool.<name>.title::
Specifies the title to use for the prompt dialog. The default
is the tool name.
guitool.<name>.prompt::
Specifies the general prompt string to display at the top of
the dialog, before subsections for 'argprompt' and 'revprompt'.
The default value includes the actual command.
help.browser::
Specify the browser that will be used to display help in the
'web' format. See linkgit:git-help[1].
help.format::
Override the default help format used by linkgit:git-help[1].
Values 'man', 'info', 'web' and 'html' are supported. 'man' is
the default. 'web' and 'html' are the same.
help.autocorrect::
Automatically correct and execute mistyped commands after
waiting for the given number of deciseconds (0.1 sec). If more
than one command can be deduced from the entered text, nothing
will be executed. If the value of this option is negative,
the corrected command will be executed immediately. If the
value is 0 - the command will be just shown but not executed.
This is the default.
help.htmlpath::
Specify the path where the HTML documentation resides. File system paths
and URLs are supported. HTML pages will be prefixed with this path when
help is displayed in the 'web' format. This defaults to the documentation
path of your Git installation.
http.proxy::
Override the HTTP proxy, normally configured using the 'http_proxy',
'https_proxy', and 'all_proxy' environment variables (see
`curl(1)`). This can be overridden on a per-remote basis; see
remote.<name>.proxy
http.cookiefile::
File containing previously stored cookie lines which should be used
in the Git http session, if they match the server. The file format
of the file to read cookies from should be plain HTTP headers or
the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
NOTE that the file specified with http.cookiefile is only used as
input. No cookies will be stored in the file.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment
variable.
http.sslCert::
File containing the SSL certificate when fetching or pushing
over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment
variable.
http.sslKey::
File containing the SSL private key when fetching or pushing
over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
variable.
http.sslCertPasswordProtected::
Enable Git's password prompt for the SSL certificate. Otherwise
OpenSSL will prompt the user, possibly many times, if the
certificate or private key is encrypted. Can be overridden by the
'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
http.sslCAInfo::
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
'GIT_SSL_CAINFO' environment variable.
http.sslCAPath::
Path containing files with the CA certificates to verify the peer
with when fetching or pushing over HTTPS. Can be overridden
by the 'GIT_SSL_CAPATH' environment variable.
http.sslTry::
Attempt to use AUTH SSL/TLS and encrypted data transfers
when connecting via regular FTP protocol. This might be needed
if the FTP server requires it for security reasons or you wish
to connect securely whenever remote FTP server supports it.
Default is false since it might trigger certificate verification
errors on misconfigured servers.
http.maxRequests::
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
http.minSessions::
The number of curl sessions (counted across slots) to be kept across
requests. They will not be ended with curl_easy_cleanup() until
http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
value will be capped at 1. Defaults to 1.
http.postBuffer::
Maximum size in bytes of the buffer used by smart HTTP
transports when POSTing data to the remote system.
For requests larger than this buffer size, HTTP/1.1 and
Transfer-Encoding: chunked is used to avoid creating a
massive pack file locally. Default is 1 MiB, which is
sufficient for most requests.
http.lowSpeedLimit, http.lowSpeedTime::
If the HTTP transfer speed is less than 'http.lowSpeedLimit'
for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and
'GIT_HTTP_LOW_SPEED_TIME' environment variables.
http.noEPSV::
A boolean which disables using of EPSV ftp command by curl.
This can helpful with some "poor" ftp servers which don't
support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
environment variable. Default is false (curl will use EPSV).
http.useragent::
The HTTP USER_AGENT string presented to an HTTP server. The default
value represents the version of the client Git such as git/1.7.1.
This option allows you to override this value to a more common value
such as Mozilla/4.0. This may be necessary, for instance, if
connecting through a firewall that restricts HTTP connections to a set
of common USER_AGENT strings (but not including those like git/1.7.1).
Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
i18n.commitEncoding::
Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
importing commits from emails or in the gitk graphical history
browser (and possibly at other places in the future or in other
porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
i18n.logOutputEncoding::
Character encoding the commit messages are converted to when
running 'git log' and friends.
imap::
The configuration variables in the 'imap' section are described
in linkgit:git-imap-send[1].
init.templatedir::
Specify the directory from which templates will be copied.
(See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
instaweb.browser::
Specify the program that will be used to browse your working
repository in gitweb. See linkgit:git-instaweb[1].
instaweb.httpd::
The HTTP daemon command-line to start gitweb on your working
repository. See linkgit:git-instaweb[1].
instaweb.local::
If true the web server started by linkgit:git-instaweb[1] will
be bound to the local IP (127.0.0.1).
instaweb.modulepath::
The default module path for linkgit:git-instaweb[1] to use
instead of /usr/lib/apache2/modules. Only used if httpd
is Apache.
instaweb.port::
The port number to bind the gitweb httpd to. See
linkgit:git-instaweb[1].
interactive.singlekey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
Currently this is used by the `--patch` mode of
linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
setting is silently ignored if portable keystroke input
is not available.
log.abbrevCommit::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
override this option with `--no-abbrev-commit`.
log.date::
Set the default date-time mode for the 'log' command.
Setting a value for log.date is similar to using 'git log''s
`--date` option. Possible values are `relative`, `local`,
`default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
for details.
log.decorate::
Print out the ref names of any commits that are shown by the log
command. If 'short' is specified, the ref name prefixes 'refs/heads/',
'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
specified, the full ref name (including prefix) will be printed.
This is the same as the log commands '--decorate' option.
log.showroot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
log.mailmap::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--use-mailmap`.
mailmap.file::
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is loaded
first, then the mailmap file pointed to by this variable.
The location of the mailmap file may be in a repository
subdirectory, or somewhere outside of the repository itself.
See linkgit:git-shortlog[1] and linkgit:git-blame[1].
mailmap.blob::
Like `mailmap.file`, but consider the value as a reference to a
blob in the repository. If both `mailmap.file` and
`mailmap.blob` are given, both are parsed, with entries from
`mailmap.file` taking precedence. In a bare repository, this
defaults to `HEAD:.mailmap`. In a non-bare repository, it
defaults to empty.
man.viewer::
Specify the programs that may be used to display help in the
'man' format. See linkgit:git-help[1].
man.<tool>.cmd::
Specify the command to invoke the specified man viewer. The
specified command is evaluated in shell with the man page
passed as argument. (See linkgit:git-help[1].)
man.<tool>.path::
Override the path for the given tool that may be used to
display help in the 'man' format. See linkgit:git-help[1].
include::merge-config.txt[]
mergetool.<tool>.path::
Override the path for the given tool. This is useful in case
your tool is not in the PATH.
mergetool.<tool>.cmd::
Specify the command to invoke the specified merge tool. The
specified command is evaluated in shell with the following
variables available: 'BASE' is the name of a temporary file
containing the common base of the files to be merged, if available;
'LOCAL' is the name of a temporary file containing the contents of
the file on the current branch; 'REMOTE' is the name of a temporary
file containing the contents of the file from the branch being
merged; 'MERGED' contains the name of the file to which the merge
tool should write the results of a successful merge.
mergetool.<tool>.trustExitCode::
For a custom merge command, specify whether the exit code of
the merge command can be used to determine whether the merge was
successful. If this is not set to true then the merge target file
timestamp is checked and the merge assumed to have been successful
if the file has been updated, otherwise the user is prompted to
indicate the success of the merge.
mergetool.keepBackup::
After performing a merge, the original file with conflict markers
can be saved as a file with a `.orig` extension. If this variable
is set to `false` then this file is not preserved. Defaults to
`true` (i.e. keep the backup files).
mergetool.keepTemporaries::
When invoking a custom merge tool, Git uses a set of temporary
files to pass to the tool. If the tool returns an error and this
variable is set to `true`, then these temporary files will be
preserved, otherwise they will be removed after the tool has
exited. Defaults to `false`.
mergetool.prompt::
Prompt before each invocation of the merge resolution program.
notes.displayRef::
The (fully qualified) refname from which to show notes when
showing commit messages. The value of this variable can be set
to a glob, in which case notes from all matching refs will be
shown. You may also specify this configuration variable
several times. A warning will be issued for refs that do not
exist, but a glob that does not match any refs is silently
ignored.
+
This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
environment variable, which must be a colon separated list of refs or
globs.
+
The effective value of "core.notesRef" (possibly overridden by
GIT_NOTES_REF) is also implicitly added to the list of refs to be
displayed.
notes.rewrite.<command>::
When rewriting commits with <command> (currently `amend` or
`rebase`) and this variable is set to `true`, Git
automatically copies your notes from the original to the
rewritten commit. Defaults to `true`, but see
"notes.rewriteRef" below.
notes.rewriteMode::
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do if
the target commit already has a note. Must be one of
`overwrite`, `concatenate`, or `ignore`. Defaults to
`concatenate`.
+
This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
environment variable.
notes.rewriteRef::
When copying notes during a rewrite, specifies the (fully
qualified) ref whose notes should be copied. The ref may be a
glob, in which case notes in all matching refs will be copied.
You may also specify this configuration several times.
+
Does not have a default value; you must configure this variable to
enable note rewriting. Set it to `refs/notes/commits` to enable
rewriting for the default commit notes.
+
This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
environment variable, which must be a colon separated list of refs or
globs.
pack.window::
The size of the window used by linkgit:git-pack-objects[1] when no
window size is given on the command line. Defaults to 10.
pack.depth::
The maximum delta depth used by linkgit:git-pack-objects[1] when no
maximum depth is given on the command line. Defaults to 50.
pack.windowMemory::
The window memory size limit used by linkgit:git-pack-objects[1]
when no limit is given on the command line. The value can be
suffixed with "k", "m", or "g". Defaults to 0, meaning no
limit.
pack.compression::
An integer -1..9, indicating the compression level for objects
in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
slowest. If not set, defaults to core.compression. If that is
not set, defaults to -1, the zlib default, which is "a default
compromise between speed and compression (currently equivalent
to level 6)."
+
Note that changing the compression level will not automatically recompress
all existing objects. You can force recompression by passing the -F option
to linkgit:git-repack[1].
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
linkgit:git-pack-objects[1] before writing them out to a pack.
This cache is used to speed up the writing object phase by not
having to recompute the final delta result once the best match
for all objects is found. Repacking large repositories on machines
which are tight with memory might be badly impacted by this though,
especially if this cache pushes the system into swapping.
A value of 0 means no limit. The smallest size of 1 byte may be
used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit::
The maximum size of a delta, that is cached in
linkgit:git-pack-objects[1]. This cache is used to speed up the
writing object phase by not having to recompute the final delta
result once the best match for all objects is found. Defaults to 1000.
pack.threads::
Specifies the number of threads to spawn when searching for best
delta matches. This requires that linkgit:git-pack-objects[1]
be compiled with pthreads otherwise this option is ignored with a
warning. This is meant to reduce packing time on multiprocessor
machines. The required amount of memory for the delta search window
is however multiplied by the number of threads.
Specifying 0 will cause Git to auto-detect the number of CPU's
and set the number of threads accordingly.
pack.indexVersion::
Specify the default pack index version. Valid values are 1 for
legacy pack index used by Git versions prior to 1.5.2, and 2 for
the new pack index with capabilities for packs larger than 4 GB
as well as proper protection against the repacking of corrupted
packs. Version 2 is the default. Note that version 2 is enforced
and this config option ignored whenever the corresponding pack is
larger than 2 GB.
+
If you have an old Git that does not understand the version 2 `*.idx` file,
cloning or fetching over a non native protocol (e.g. "http" and "rsync")
that will copy both `*.pack` file and corresponding `*.idx` file from the
other side may give you a repository that cannot be accessed with your
older version of Git. If the `*.pack` file is smaller than 2 GB, however,
you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
the `*.idx` file.
pack.packSizeLimit::
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the git:// protocol
is unaffected. It can be overridden by the `--max-pack-size`
option of linkgit:git-repack[1]. The minimum size allowed is
limited to 1 MiB. The default is unlimited.
Common unit suffixes of 'k', 'm', or 'g' are
supported.
pager.<cmd>::
If the value is boolean, turns on or off pagination of the
output of a particular Git subcommand when writing to a tty.
Otherwise, turns on pagination for the subcommand using the
pager specified by the value of `pager.<cmd>`. If `--paginate`
or `--no-pager` is specified on the command line, it takes
precedence over this option. To disable pagination for all
commands, set `core.pager` or `GIT_PAGER` to `cat`.
pretty.<name>::
Alias for a --pretty= format string, as specified in
linkgit:git-log[1]. Any aliases defined here can be used just
as the built-in pretty formats could. For example,
running `git config pretty.changelog "format:* %H %s"`
would cause the invocation `git log --pretty=changelog`
to be equivalent to running `git log "--pretty=format:* %H %s"`.
Note that an alias with the same name as a built-in format
will be silently ignored.
pull.rebase::
When true, rebase branches on top of the fetched branch, instead
of merging the default branch from the default remote when "git
pull" is run. See "branch.<name>.rebase" for setting this on a
per-branch basis.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
for details).
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
pull.twohead::
The default merge strategy to use when pulling a single branch.
push.default::
Defines the action `git push` should take if no refspec is
explicitly given. Different values are well-suited for
specific workflows; for instance, in a purely central workflow
(i.e. the fetch source is equal to the push destination),
`upstream` is probably what you want. Possible values are:
+
--
* `nothing` - do not push anything (error out) unless a refspec is
explicitly given. This is primarily meant for people who want to
avoid mistakes by always being explicit.
* `current` - push the current branch to update a branch with the same
name on the receiving end. Works in both central and non-central
workflows.
* `upstream` - push the current branch back to the branch whose
changes are usually integrated into the current branch (which is
called `@{upstream}`). This mode only makes sense if you are
pushing to the same repository you would normally pull from
(i.e. central workflow).
* `simple` - in centralized workflow, work like `upstream` with an
added safety to refuse to push if the upstream branch's name is
different from the local one.
+
When pushing to a remote that is different from the remote you normally
pull from, work as `current`. This is the safest option and is suited
for beginners.
+
This mode will become the default in Git 2.0.
* `matching` - push all branches having the same name on both ends.
This makes the repository you are pushing to remember the set of
branches that will be pushed out (e.g. if you always push 'maint'
and 'master' there and no other branches, the repository you push
to will have these two branches, and your local 'maint' and
'master' will be pushed there).
+
To use this mode effectively, you have to make sure _all_ the
branches you would push out are ready to be pushed out before
running 'git push', as the whole point of this mode is to allow you
to push all of the branches in one go. If you usually finish work
on only one branch and push out the result, while other branches are
unfinished, this mode is not for you. Also this mode is not
suitable for pushing into a shared central repository, as other
people may add new branches there, or update the tip of existing
branches outside your control.
+
This is currently the default, but Git 2.0 will change the default
to `simple`.
--
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase. False by default.
rebase.autosquash::
If set to true enable '--autosquash' option by default.
rebase.autostash::
When set to true, automatically create a temporary stash
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
However, use with care: the final stash application after a
successful rebase might result in non-trivial conflicts.
Defaults to false.
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
it by setting this variable to false.
receive.fsckObjects::
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
Defaults to false. If not set, the value of `transfer.fsckObjects`
is used instead.
receive.unpackLimit::
If the number of objects received in a push is below this
limit then the objects will be unpacked into loose object
files. However if the number of received objects equals or
exceeds this limit then the received pack will be stored as
a pack, after adding any missing delta bases. Storing the
pack from a push can make the push operation complete faster,
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
receive.denyDeletes::
If set to true, git-receive-pack will deny a ref update that deletes
the ref. Use this to prevent such a ref deletion via a push.
receive.denyDeleteCurrent::
If set to true, git-receive-pack will deny a ref update that
deletes the currently checked out branch of a non-bare repository.
receive.denyCurrentBranch::
If set to true or "refuse", git-receive-pack will deny a ref update
to the currently checked out branch of a non-bare repository.
Such a push is potentially dangerous because it brings the HEAD
out of sync with the index and working tree. If set to "warn",
print a warning of such a push to stderr, but allow the push to
proceed. If set to false or "ignore", allow such pushes with no
message. Defaults to "refuse".
receive.denyNonFastForwards::
If set to true, git-receive-pack will deny a ref update which is
not a fast-forward. Use this to prevent such an update via a push,
even if that push is forced. This configuration variable is
set when initializing a shared repository.
receive.hiderefs::
String(s) `receive-pack` uses to decide which refs to omit
from its initial advertisement. Use more than one
definitions to specify multiple prefix strings. A ref that
are under the hierarchies listed on the value of this
variable is excluded, and is hidden when responding to `git
push`, and an attempt to update or delete a hidden ref by
`git push` is rejected.
receive.updateserverinfo::
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
remote.pushdefault::
The remote to push to by default. Overrides
`branch.<name>.remote` for all branches, and is overridden by
`branch.<name>.pushremote` for specific branches.
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
remote.<name>.pushurl::
The push URL of a remote repository. See linkgit:git-push[1].
remote.<name>.proxy::
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
disable proxying for that remote.
remote.<name>.fetch::
The default set of "refspec" for linkgit:git-fetch[1]. See
linkgit:git-fetch[1].
remote.<name>.push::
The default set of "refspec" for linkgit:git-push[1]. See
linkgit:git-push[1].
remote.<name>.mirror::
If true, pushing to this remote will automatically behave
as if the `--mirror` option was given on the command line.
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating
using linkgit:git-fetch[1] or the `update` subcommand of
linkgit:git-remote[1].
remote.<name>.skipFetchAll::
If true, this remote will be skipped by default when updating
using linkgit:git-fetch[1] or the `update` subcommand of
linkgit:git-remote[1].
remote.<name>.receivepack::
The default program to execute on the remote side when pushing. See
option \--receive-pack of linkgit:git-push[1].
remote.<name>.uploadpack::
The default program to execute on the remote side when fetching. See
option \--upload-pack of linkgit:git-fetch-pack[1].
remote.<name>.tagopt::
Setting this value to \--no-tags disables automatic tag following when
fetching from remote <name>. Setting it to \--tags will fetch every
tag from remote <name>, even if they are not reachable from remote
branch heads. Passing these flags directly to linkgit:git-fetch[1] can
override this setting. See options \--tags and \--no-tags of
linkgit:git-fetch[1].
remote.<name>.vcs::
Setting this to a value <vcs> will cause Git to interact with
the remote with the git-remote-<vcs> helper.
remotes.<group>::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
repack.usedeltabaseoffset::
By default, linkgit:git-repack[1] creates packs that use
delta-base offset. If you need to share your repository with
Git older than version 1.4.4, either directly or via a dumb
protocol such as http, then you need to set this option to
"false" and repack. Access from old Git versions over the
native protocol are unaffected by this option.
rerere.autoupdate::
When set to true, `git-rerere` updates the index with the
resulting contents after it cleanly resolves conflicts using
previously recorded resolution. Defaults to false.
rerere.enabled::
Activate recording of resolved conflicts, so that identical
conflict hunks can be resolved automatically, should they be
encountered again. By default, linkgit:git-rerere[1] is
enabled if there is an `rr-cache` directory under the
`$GIT_DIR`, e.g. if "rerere" was previously used in the
repository.
sendemail.identity::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
the value of 'sendemail.identity'.
sendemail.smtpencryption::
See linkgit:git-send-email[1] for description. Note that this
setting is not subject to the 'identity' mechanism.
sendemail.smtpssl::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
sendemail.smtpsslcertpath::
Path to ca-certificates (either a directory or a single file).
Set it to an empty string to disable certificate verification.
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
found below, taking precedence over those when the this
identity is selected, through command-line or
'sendemail.identity'.
sendemail.aliasesfile::
sendemail.aliasfiletype::
sendemail.annotate::
sendemail.bcc::
sendemail.cc::
sendemail.cccmd::
sendemail.chainreplyto::
sendemail.confirm::
sendemail.envelopesender::
sendemail.from::
sendemail.multiedit::
sendemail.signedoffbycc::
sendemail.smtppass::
sendemail.suppresscc::
sendemail.suppressfrom::
sendemail.to::
sendemail.smtpdomain::
sendemail.smtpserver::
sendemail.smtpserverport::
sendemail.smtpserveroption::
sendemail.smtpuser::
sendemail.thread::
sendemail.validate::
See linkgit:git-send-email[1] for description.
sendemail.signedoffcc::
Deprecated alias for 'sendemail.signedoffbycc'.
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
status.relativePaths::
By default, linkgit:git-status[1] shows paths relative to the
current directory. Setting this variable to `false` shows paths
relative to the repository root (this was the default for Git
prior to v1.5.4).
status.short::
Set to true to enable --short by default in linkgit:git-status[1].
The option --no-short takes precedence over this variable.
status.branch::
Set to true to enable --branch by default in linkgit:git-status[1].
The option --no-branch takes precedence over this variable.
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
contain only untracked files, are shown with the directory name
only. Showing untracked files means that Git needs to lstat() all
all the files in the whole repository, which might be slow on some
systems. So, this variable controls how the commands displays
the untracked files. Possible values are:
+
--
* `no` - Show no untracked files.
* `normal` - Show untracked files and directories.
* `all` - Show also individual files in untracked directories.
--
+
If this variable is not specified, it defaults to 'normal'.
This variable can be overridden with the -u|--untracked-files option
of linkgit:git-status[1] and linkgit:git-commit[1].
status.submodulesummary::
Defaults to false.
If this is set to a non zero number or true (identical to -1 or an
unlimited number), the submodule summary will be enabled and a
summary of commits for modified submodules will be shown (see
--summary-limit option of linkgit:git-submodule[1]).
submodule.<name>.path::
submodule.<name>.url::
submodule.<name>.update::
The path within this project, URL, and the updating strategy
for a submodule. These variables are initially populated
by 'git submodule init'; edit them to override the
URL and other values found in the `.gitmodules` file. See
linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.branch::
The remote branch name for a submodule, used by `git submodule
update --remote`. Set this option to override the value found in
the `.gitmodules` file. See linkgit:git-submodule[1] and
linkgit:gitmodules[5] for details.
submodule.<name>.fetchRecurseSubmodules::
This option can be used to control recursive fetching of this
submodule. It can be overridden by using the --[no-]recurse-submodules
command line option to "git fetch" and "git pull".
This setting will override that from in the linkgit:gitmodules[5]
file.
submodule.<name>.ignore::
Defines under what circumstances "git status" and the diff family show
a submodule as modified. When set to "all", it will never be considered
modified, "dirty" will ignore all changes to the submodules work tree and
takes only differences between the HEAD of the submodule and the commit
recorded in the superproject into account. "untracked" will additionally
let submodules with modified tracked files in their work tree show up.
Using "none" (the default when this option is not set) also shows
submodules that have untracked files in their work tree as changed.
This setting overrides any setting made in .gitmodules for this submodule,
both settings can be overridden on the command line by using the
"--ignore-submodules" option.
tar.umask::
This variable can be used to restrict the permission bits of
tar archive entries. The default is 0002, which turns off the
world write bit. The special value "user" indicates that the
archiving user's umask will be used instead. See umask(2) and
linkgit:git-archive[1].
transfer.fsckObjects::
When `fetch.fsckObjects` or `receive.fsckObjects` are
not set, the value of this variable is used instead.
Defaults to false.
transfer.hiderefs::
This variable can be used to set both `receive.hiderefs`
and `uploadpack.hiderefs` at the same time to the same
values. See entries for these other variables.
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
not set, the value of this variable is used instead.
The default value is 100.
uploadpack.hiderefs::
String(s) `upload-pack` uses to decide which refs to omit
from its initial advertisement. Use more than one
definitions to specify multiple prefix strings. A ref that
are under the hierarchies listed on the value of this
variable is excluded, and is hidden from `git ls-remote`,
`git fetch`, etc. An attempt to fetch a hidden ref by `git
fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
uploadpack.allowtipsha1inwant::
When `uploadpack.hiderefs` is in effect, allow `upload-pack`
to accept a fetch request that asks for an object at the tip
of a hidden ref (by default, such a request is rejected).
see also `uploadpack.hiderefs`.
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a
large number of repositories, and serves them with multiple
access methods, and some users need to use different access
methods, this feature allows people to specify any of the
equivalent URLs and have Git automatically rewrite the URL to
the best alternative for the particular user, even for a
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
url.<base>.pushInsteadOf::
Any URL that starts with this value will not be pushed to;
instead, it will be rewritten to start with <base>, and the
resulting URL will be pushed to. In cases where some site serves
a large number of repositories, and serves them with multiple
access methods, some of which do not allow push, this feature
allows people to specify a pull-only URL and have Git
automatically use an appropriate URL to push, even for a
never-before-seen repository on the site. When more than one
pushInsteadOf strings match a given URL, the longest match is
used. If a remote has an explicit pushurl, Git will ignore this
setting for that remote.
user.email::
Your email address to be recorded in any newly created commits.
Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and
'EMAIL' environment variables. See linkgit:git-commit-tree[1].
user.name::
Your full name to be recorded in any newly created commits.
Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
environment variables. See linkgit:git-commit-tree[1].
user.signingkey::
If linkgit:git-tag[1] is not selecting the key you want it to
automatically when creating a signed tag, you can override the
default selection with this variable. This option is passed
unchanged to gpg's --local-user parameter, so you may specify a key
using any method that gpg supports.
web.browser::
Specify a web browser that may be used by some commands.
Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
may use it.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...