Revision 27504be5c10bdc61761ec0126b3645428598ad91 authored by Tomoya MORINAGA on 06 September 2011, 08:16:34 UTC, committed by Grant Likely on 04 October 2011, 16:10:50 UTC
Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1 parent 387719c
link_power_management_policy.txt
This parameter allows the user to set the link (interface) power management.
There are 3 possible options:
Value Effect
----------------------------------------------------------------------------
min_power Tell the controller to try to make the link use the
least possible power when possible. This may
sacrifice some performance due to increased latency
when coming out of lower power states.
max_performance Generally, this means no power management. Tell
the controller to have performance be a priority
over power management.
medium_power Tell the controller to enter a lower power state
when possible, but do not enter the lowest power
state, thus improving latency over min_power setting.
Computing file changes ...
