Revision 27504be5c10bdc61761ec0126b3645428598ad91 authored by Tomoya MORINAGA on 06 September 2011, 08:16:34 UTC, committed by Grant Likely on 04 October 2011, 16:10:50 UTC
Currently, in case of reading date from SPI flash,
command is sent twice.
The cause is that tx-memory clear processing is missing .
This patch adds the tx-momory clear processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1 parent 387719c
Raw File
sym53c500_cs.txt
The sym53c500_cs driver originated as an add-on to David Hinds' pcmcia-cs
package, and was written by Tom Corner (tcorner@via.at).  A rewrite was
long overdue, and the current version addresses the following concerns:

	(1) extensive kernel changes between 2.4 and 2.6.
	(2) deprecated PCMCIA support outside the kernel.

All the USE_BIOS code has been ripped out.  It was never used, and could
not have worked anyway.  The USE_DMA code is likewise gone.  Many thanks
to YOKOTA Hiroshi (nsp_cs driver) and David Hinds (qlogic_cs driver) for
the code fragments I shamelessly adapted for this work.  Thanks also to
Christoph Hellwig for his patient tutelage while I stumbled about.

The Symbios Logic 53c500 chip was used in the "newer" (circa 1997) version
of the New Media Bus Toaster PCMCIA SCSI controller.  Presumably there are
other products using this chip, but I've never laid eyes (much less hands)
on one.

Through the years, there have been a number of downloads of the pcmcia-cs
version of this driver, and I guess it worked for those users.  It worked
for Tom Corner, and it works for me.  Your mileage will probably vary.

--Bob Tracy (rct@frus.com)
back to top