| 2966492 | Marco Giunta | 18 October 2021, 16:25:52 UTC | ALSA: usb-audio: Fix microphone sound on Jieli webcam. When a Jieli Technology USB Webcam is connected, the video part works well, but the mic sound is speeded up. On dmesg there are messages about different rates from the runtime rates, warnings about volume resolution and lastly, the log is filled, every 5 seconds, with retire_capture_urb error messages. The mic works only when ep packet size is set to wMaxPacketSize (normal sound and no more retire_capture_urb error messages). Skipping reading sample rate, fixes the messages about different rates and forcing a volume resolution, fixes warnings about volume range. I have arbitrarily choosed the value (16): I read in a comment that there should be no more than 255 levels, so 4096 (max volume) / 16 = 0-255. Signed-off-by: Marco Giunta <giun7a@gmail.com> Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 October 2021, 06:07:01 UTC |
| eadeb06 | Takashi Iwai | 15 October 2021, 15:43:46 UTC | Merge tag 'asoc-fix-v5.15-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.15 A colletion of smallish mostly driver specific fixes, the biggest thing here is fixing some of the core code to generate change notifications properly when writing to controls which will fix issues with UIs not showing the correct values. There's one build fix here with a slightly misleading changelog saying it's adding IRQ config support, it's adding a missing select of the regmap-irq code rather than adding a feature. | 15 October 2021, 15:43:46 UTC |
| d94befb | Davide Baldo | 15 October 2021, 07:21:22 UTC | ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and rear speakers are silent, this patch fixes that by overriding the pin layout and by initializing the amplifier which needs a GPIO pin to be set to 1 then 0, similar to the existing HP Spectre x360 14 model. In order to have volume control, both front and rear speakers were forced to use the DAC1. This patch also correctly map the mute LED but since there is no microphone on/off switch exposed by the alsa subsystem it never turns on by itself. There are still known audio issues in this laptop: headset microphone doesn't work, the button to mute/unmute microphone is not yet mapped, the LED of the mute/unmute speakers doesn't seems to be exposed via GPIO and never turns on. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953 Signed-off-by: Davide Baldo <davide@baldo.me> Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 October 2021, 07:41:49 UTC |
| 3c414eb | Brendan Grieve | 15 October 2021, 02:53:35 UTC | ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13 The GSP670 has 2 playback and 1 recording device that by default are detected in an incompatible order for alsa. This may have been done to make it compatible for the console by the manufacturer and only affects the latest firmware which uses its own ID. This quirk will resolve this by reordering the channels. Signed-off-by: Brendan Grieve <brendan@grieve.com.au> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 October 2021, 07:27:41 UTC |
| aef454b | Steven Clarkson | 14 October 2021, 13:35:54 UTC | ALSA: hda/realtek: Add quirk for Clevo PC50HS Apply existing PCI quirk to the Clevo PC50HS and related models to fix audio output on the built in speakers. Signed-off-by: Steven Clarkson <sc@lambdal.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 October 2021, 13:41:42 UTC |
| 22390ce | Greg Kroah-Hartman | 14 October 2021, 11:17:50 UTC | ALSA: usb-audio: add Schiit Hel device to quirk table The Shciit Hel device responds to the ctl message for the mic capture switch with a timeout of -EPIPE: usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 This seems safe to ignore as the device works properly with the control message quirk, so add it to the quirk table so all is good. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 October 2021, 12:39:06 UTC |
| 6b9b546 | Shengjiu Wang | 13 October 2021, 05:17:04 UTC | ASoC: wm8960: Fix clock configuration on slave mode There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> | 13 October 2021, 15:25:33 UTC |
| 48827e1 | Jonas Hahnfeld | 12 October 2021, 20:09:07 UTC | ALSA: usb-audio: Add quirk for VF0770 The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 October 2021, 20:13:11 UTC |
| b37a151 | Kai Vehmanen | 12 October 2021, 14:29:35 UTC | ALSA: hda: avoid write to STATESTS if controller is in reset The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 October 2021, 16:05:28 UTC |
| a3fd1a9 | Hui Wang | 12 October 2021, 11:47:48 UTC | ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537 Reported-and-tested-by: msd <msd.mmq@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 October 2021, 12:10:19 UTC |
| aa18457 | Stefan Binding | 11 October 2021, 14:49:03 UTC | ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets Ensure the default 0dB playback path is always used. The code that set FULL_SCALE_VOL based on LOAD_DET_RCSTAT was spurious, and resulted in a -6dB attenuation being accidentally inserted into the playback path. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211011144903.28915-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> | 12 October 2021, 10:48:39 UTC |
| 228af5a | Takashi Iwai | 10 October 2021, 07:55:46 UTC | ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney <mforney@mforney.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 October 2021, 16:10:47 UTC |
| c448b7a | Yang Yingliang | 09 October 2021, 06:58:40 UTC | ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() 'component' is allocated in snd_soc_register_component(), but component->list is not initalized, this may cause snd_soc_del_component_unlocked() deref null ptr in the error handing case. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__list_del_entry_valid+0x81/0xf0 Call Trace: snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core] snd_soc_add_component.cold+0x54/0x6c [snd_soc_core] snd_soc_register_component+0x70/0x90 [snd_soc_core] devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core] tas2552_probe+0x265/0x320 [snd_soc_tas2552] ? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552] i2c_device_probe+0xa31/0xbe0 Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> | 11 October 2021, 12:19:14 UTC |
| 023a062 | Cameron Berkenpas | 10 October 2021, 22:54:11 UTC | ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 The previous patch's HDA verb initialization for the Lenovo 13s sequence was slightly off. This updated verb sequence has been tested and confirmed working. Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Cc: <stable@vger.kernel.org> Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de> Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 October 2021, 09:05:59 UTC |
| 214174d | Srinivasa Rao Mandadapu | 07 October 2021, 13:51:15 UTC | ASoC: codec: wcd938x: Add irq config support This patch fixes compilation error in wcd98x codec driver. Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1633614675-27122-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:14 UTC |
| 5af82c8 | Takashi Iwai | 06 October 2021, 14:17:12 UTC | ASoC: DAPM: Fix missing kctl change notifications The put callback of a kcontrol is supposed to return 1 when the value is changed, and this will be notified to user-space. However, some DAPM kcontrols always return 0 (except for errors), hence the user-space misses the update of a control value. This patch corrects the behavior by properly returning 1 when the value gets updated. Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:12 UTC |
| c25d454 | Andy Shevchenko | 06 October 2021, 15:04:28 UTC | ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211006150428.16434-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:11 UTC |
| 10f4a96 | Andy Shevchenko | 06 October 2021, 15:04:27 UTC | ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() First of all, replace indexed API by plain one since we have index 0. Second, switch to optional variant and drop duplicated code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211006150428.16434-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:10 UTC |
| 6f32c52 | Andy Shevchenko | 06 October 2021, 15:04:26 UTC | ASoC: Intel: bytcht_es8316: Use temporary variable for struct device Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211006150428.16434-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:09 UTC |
| 2577b86 | Andy Shevchenko | 06 October 2021, 15:04:25 UTC | ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.com> Link: https://lore.kernel.org/r/20211006150428.16434-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:08 UTC |
| db0767b | Srinivasa Rao Mandadapu | 07 October 2021, 13:50:19 UTC | ASoC: wcd938x: Fix jack detection issue This patch is to fix audio 3.5mm jack detection failure on wcd938x codec based target. Fixes: bcee7ed09b8e (ASoC: codecs: wcd938x: add Multi Button Headset Control support) Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1633614619-27026-1-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> | 07 October 2021, 14:45:07 UTC |
| c0f1886 | Takashi Iwai | 06 October 2021, 14:19:40 UTC | ALSA: hda: intel: Allow repeatedly probing on codec configuration errors It seems that a few recent AMD systems show the codec configuration errors at the early boot, while loading the driver at a later stage works magically. Although the root cause of the error isn't clear, it's certainly not bad to allow retrying the codec probe in such a case if that helps. This patch adds the capability for retrying the probe upon codec probe errors on the certain AMD platforms. The probe_work is changed to a delayed work, and at the secondary call, it'll jump to the codec probing. Note that, not only adding the re-probing, this includes the behavior changes in the codec configuration function. Namely, snd_hda_codec_configure() won't unregister the codec at errors any longer. Instead, its caller, azx_codec_configure() unregisters the codecs with the probe failures *if* any codec has been successfully configured. If all codec probe failed, it doesn't unregister but let it re-probed -- which is the most case we're seeing and this patch tries to improve. Even if the driver doesn't re-probe or give up, it will go to the "free-all" error path, hence the leftover codecs shall be disabled / deleted in anyway. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801 Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2021, 07:15:22 UTC |
| dd6dd6e | Werner Sembach | 06 October 2021, 13:04:15 UTC | ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This fixes the issue of the internal Microphone not working after booting another OS. When booting a certain another OS this barebone keeps some coeff settings even after a cold shutdown. These coeffs prevent the microphone detection from working in Linux, making the Laptop think that there is always an external microphone plugged-in and therefore preventing the use of the internal one. The relevant indexes and values where gathered by naively diff-ing and reading a working and a non-working coeff dump. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 October 2021, 13:59:29 UTC |
| 5aec989 | Kailang Yang | 05 October 2021, 06:35:14 UTC | ALSA: hda/realtek - ALC236 headset MIC recording issue In power save mode, the recording voice from headset mic will 2s more delay. Add this patch will solve this issue. [ minor coding style fix by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 October 2021, 07:01:32 UTC |
| 5963e52 | Takashi Iwai | 04 October 2021, 07:40:50 UTC | ALSA: usb-audio: Enable rate validation for Scarlett devices The Scarlett device series from Focusrite Novation seem requiring the sample rate validations as we've done for MOTU devices; otherwise the driver probes invalid audioformat entries that contain the sample rates that actually don't work, and this may result in an incomplete setup as reported recently. This patch adds the needed quirk flag for enabling the sample rate validation for Focusrite Novation devices. Fixes: fe773b8711e3 ("ALSA: usb-audio: workaround for iface reset issue") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214493 Link: https://lore.kernel.org/r/20211004074050.28241-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 October 2021, 05:57:19 UTC |
| cc03069 | Werner Sembach | 01 October 2021, 13:31:11 UTC | ALSA: hda/realtek: Add quirk for Clevo X170KM-G This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This fixes the issue of the devices internal Speaker not working. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 04 October 2021, 07:35:26 UTC |
| 1f8d398 | Werner Sembach | 01 October 2021, 13:31:10 UTC | ALSA: hda/realtek: Complete partial device name to avoid ambiguity The string "Clevo X170" is not enough to unambiguously identify the correct device. Fixing it so another Clevo barebone name starting with "X170" can be added without causing confusion. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 04 October 2021, 07:35:16 UTC |
| 2b987fe | Chris Chiu | 01 October 2021, 06:28:56 UTC | ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 The headphone mic is not working on Dell Latitude laptops with ALC3254. The codec vendor id is 0x10ec0295 and share the same pincfg as defined in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE need to be applied instead. Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before a generic fixup comes out. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 October 2021, 07:00:18 UTC |
| 42871e9 | Hans de Goede | 29 September 2021, 20:15:12 UTC | ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working Commit 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling") replaced the nau8824_dapm_enable_pin() helper with direct calls to snd_soc_dapm_enable_pin(), but the helper was using snd_soc_dapm_force_enable_pin() and not forcing the MICBIAS + SAR supplies on breaks headphone vs headset and button-press detection. Replace the snd_soc_dapm_enable_pin() calls with snd_soc_dapm_force_enable_pin() to fix this. Cc: stable@vger.kernel.org Fixes: 1d25684e2251 ("ASoC: nau8824: Fix open coded prefix handling") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210929201512.460360-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> | 30 September 2021, 12:25:55 UTC |
| 1f8763c | Takashi Iwai | 30 September 2021, 11:41:14 UTC | ALSA: seq: Fix a potential UAF by wrong private_free call order John Keeping reported and posted a patch for a potential UAF in rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be called after the associated rawmidi object got already freed. After a deeper look, it turned out that the bug is rather the incorrect private_free call order for a snd_seq_device. The snd_seq_device private_free gets called at the release callback of the sequencer device object, while this was rather expected to be executed at the snd_device call chains that runs at the beginning of the whole card-free procedure. It's been broken since the rewrite of sequencer-device binding (although it hasn't surfaced because the sequencer device release happens usually right along with the card device release). This patch corrects the private_free call to be done in the right place, at snd_seq_device_dev_free(). Fixes: 7c37ae5c625a ("ALSA: seq: Rewrite sequencer device binding with standard bus") Reported-and-tested-by: John Keeping <john@metanate.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 September 2021, 12:13:22 UTC |
| eb67662 | John Liu | 30 September 2021, 11:53:16 UTC | ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289 audio just like its sibling product XPS 9510, so it requires the same quirk to enable woofer output. Tested on my Dell Precision 5560. Signed-off-by: John Liu <johnliu55tw@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 September 2021, 11:54:00 UTC |
| 8ec59ac | Takashi Iwai | 29 September 2021, 07:35:40 UTC | ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer The check of the returned error code is missing in scarlett2_update_monitor_other(). Let's fix it. Fixes: d5bda7e03982 ("ALSA: usb-audio: scarlett2: Add support for the talkback feature") Reported-by: kernel test robot <lkp@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/202109131831.9IodEzRx-lkp@intel.com Link: https://lore.kernel.org/r/20210929073540.9611-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 September 2021, 11:48:51 UTC |
| f2ff714 | Thomas Gleixner | 23 September 2021, 16:04:25 UTC | ALSA: pcsp: Make hrtimer forwarding more robust The hrtimer callback pcsp_do_timer() prepares rearming of the timer with hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to forward the expiry time of the hrtimer by a multiple of the period argument so that the expiry time greater than the time provided in the 'now' argument. pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry time as 'now' argument. That's providing a periodic timer expiry, but is not really robust when the timer callback is delayed so that the resulting new expiry time is already in the past which causes the callback to be invoked immediately again. If the timer is delayed then the back to back invocation is not really making it better than skipping the missed periods. Sound is distorted in any case. Use hrtimer_forward_now() which ensures that the next expiry is in the future. This prevents hogging the CPU in the timer expiry code and allows later on to remove hrtimer_forward() from the public interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: alsa-devel@alsa-project.org Cc: Takashi Iwai <tiwai@suse.com> Cc: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 28 September 2021, 08:58:08 UTC |
| 0cc3687 | Mark Brown | 24 September 2021, 19:48:44 UTC | ASoC: cs4341: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding SPI IDs for parts that only have a compatible listed. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210924194844.45974-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> | 27 September 2021, 11:59:09 UTC |
| ceef324 | Mark Brown | 24 September 2021, 19:49:56 UTC | ASoC: pcm179x: Add missing entries SPI to device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding SPI IDs for parts that only have a compatible listed. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210924194956.46079-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> | 27 September 2021, 11:59:08 UTC |
| 09d2317 | Jaroslav Kysela | 20 September 2021, 17:18:50 UTC | ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION The new framing mode causes the user space regression, because the alsa-lib code does not initialize the reserved space in the params structure when the device is opened. This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we do for the PCM interface for the protocol acknowledgment. Cc: David Henningsson <coding@diwic.se> Cc: <stable@vger.kernel.org> Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode") BugLink: https://github.com/alsa-project/alsa-lib/issues/178 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 September 2021, 07:26:40 UTC |
| cb1bcf5 | Takashi Sakamoto | 20 September 2021, 11:07:34 UTC | ALSA: firewire-motu: fix truncated bytes in message tracepoints In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data channels includes message bytes from device. The total size of message is 48 bits per data block. The 'data_block_message' tracepoints event produced by ALSA firewire-motu driver exposes the sequence of messages to userspace in 64 bit storage, however lower 32 bits are actually available since current implementation truncates 16 bits in upper of the message as a result of bit shift operation within 32 bit storage. This commit fixes the bug by perform the bit shift in 64 bit storage. Fixes: c6b0b9e65f09 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> | 21 September 2021, 16:48:32 UTC |
| 77ff9e7 | Takashi Iwai | 21 September 2021, 16:42:14 UTC | Merge tag 'asoc-fix-v5.15-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.15 A crop of mostly device specific fixes that have been applied since the merge window, nothing particularly standout here. | 21 September 2021, 16:42:14 UTC |
| 74b7ee0 | Shengjiu Wang | 10 September 2021, 09:18:30 UTC | ASoC: fsl_xcvr: Fix channel swap issue with ARC With pause and resume test for ARC, there is occasionally channel swap issue. The reason is that currently driver set the DPATH out of reset first, then start the DMA, the first data got from FIFO may not be the Left channel. Moving DPATH out of reset operation after the dma enablement to fix this issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1631265510-27384-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> | 21 September 2021, 12:23:36 UTC |
| 3f4b57a | Peter Rosin | 20 September 2021, 14:49:39 UTC | ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers Commit 25d27c4f68d2 ("ASoC: pcm512x: Add support for more data formats") breaks the TSE-850 device, which is using a pcm5142 in I2S and CBM_CFS mode (maybe not relevant). Without this fix, the result is: pcm512x 0-004c: Failed to set data format: -16 And after that, no sound. This fix is not 100% correct. The datasheet of at least the pcm5142 states that four bits (0xcc) in the I2S_1 register are "RSV" ("Reserved. Do not access.") and no hint is given as to what the initial values are supposed to be. So, specifying defaults for these bits is wrong. But perhaps better than a broken driver? Fixes: 25d27c4f68d2 ("ASoC: pcm512x: Add support for more data formats") Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Kirill Marinushkin <kmarinushkin@birdec.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/2d221984-7a2e-7006-0f8a-ffb5f64ee885@axentia.se Signed-off-by: Mark Brown <broonie@kernel.org> | 21 September 2021, 12:23:34 UTC |
| cfacfef | Peter Ujfalusi | 17 September 2021, 08:51:08 UTC | ASoC: SOF: trace: Omit error print when waking up trace sleepers Do not print error message from snd_sof_trace_notify_for_error() when possible sleeping trace work is woken up to flush the remaining debug information. This action by itself is not an error, it is just an action we take when an error occurs to make sure that all information have been fed to the userspace (if we have trace in use). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210917085108.25532-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 17 September 2021, 12:16:36 UTC |
| 3abe2ee | Trevor Wu | 17 September 2021, 08:28:05 UTC | ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX S24_LE params fixup is only required for DPTX. Remove fixup ops assignment for HDMITX. Fixes: 40d605df0a7b ("ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682") Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210917082805.30898-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> | 17 September 2021, 12:16:35 UTC |
| 25766ee | Peter Ujfalusi | 16 September 2021, 08:53:42 UTC | ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication In case the firmware is missing we will have the following in the kernel log: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: request firmware intel/sof/sof-tgl-h.ri failed err: -2 3 | you may need to download the firmware from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 The first line is the standard, request_firmware() warning. The second and third line is printed in snd_sof_load_firmware_raw() Note that the first and second line is mostly identical. With this patch the log will be changed to: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: sof firmware file is missing, you might need to 3 | download it from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210916085342.29993-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 16 September 2021, 13:01:55 UTC |
| 8a8e181 | Marc Herbert | 16 September 2021, 08:50:08 UTC | ASoC: SOF: loader: release_firmware() on load failure to avoid batching Invoke release_firmware() when the firmware fails to boot in sof_probe_continue(). The request_firmware() framework must be informed of failures in sof_probe_continue() otherwise its internal "batching" feature (different from caching) cached the firmware image forever. Attempts to correct the file in /lib/firmware/ were then silently and confusingly ignored until the next reboot. Unloading the drivers did not help because from their disconnected perspective the firmware had failed so there was nothing to release. Also leverage the new snd_sof_fw_unload() function to simplify the snd_sof_device_remove() function. Signed-off-by: Marc Herbert <marc.herbert@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 16 September 2021, 13:01:54 UTC |
| 94d508f | Stefan Binding | 16 September 2021, 09:56:46 UTC | ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack Dell's requirement to have headset mic as phantom jack on this specific dolphin hardware platform. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210916095646.7631-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 September 2021, 10:24:46 UTC |
| be83038 | Alexey Dobriyan | 14 September 2021, 11:08:47 UTC | ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition The following preprocessor directive is non-compliant: #undef PCXHR_REG_TO_PORT(x) gcc warns about extra tokens but nobody sees them as they are under if branch which is never parsed. Make it an #error, it is not clear to me what the author meant. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Link: https://lore.kernel.org/r/YUCCv47sm4zf9OVO@localhost.localdomain Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 September 2021, 09:09:04 UTC |
| d9be4a8 | Peter Ujfalusi | 15 September 2021, 12:21:09 UTC | ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: afb93d716533d ("ASoC: SOF: imx: Add i.MX8M HW support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 15 September 2021, 15:23:49 UTC |
| 10d93a9 | Peter Ujfalusi | 15 September 2021, 12:21:08 UTC | ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: 202acc565a1f0 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210915122116.18317-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 15 September 2021, 15:23:48 UTC |
| ac4dfcc | Yong Zhi | 15 September 2021, 06:32:30 UTC | ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. Fixes: e657c18a01c8 ('ASoC: SOF: Add xtensa support') Signed-off-by: Yong Zhi <yong.zhi@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210915063230.29711-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 15 September 2021, 12:07:51 UTC |
| ad7cc2d | Cameron Berkenpas | 13 September 2021, 21:26:29 UTC | ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. This patch initializes and enables speaker output on the Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 series of laptops using the HDA verb sequence specific to each model. Speaker automute is suppressed for the Lenovo Legion 7i 15IMHG05 to avoid breaking speaker output on resume and when devices are unplugged from its headphone jack. Thanks to: Andreas Holzer, Vincent Morel, sycxyc, Max Christian Pohle and all others that helped. [ minor coding style fixes by tiwai ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210913212627.339362-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 September 2021, 09:09:17 UTC |
| 7b9cf90 | Takashi Iwai | 10 September 2021, 10:51:55 UTC | ALSA: usb-audio: Unify mixer resume and reset_resume procedure USB-audio driver assumes that the normal resume would preserve the device configuration while reset_resume wouldn't, and tries to restore the mixer elements only at reset_resume callback. However, this seems too naive, and some devices do behave differently, resetting the volume at the normal resume; this resulted in the inconsistent volume that surprised users. This patch changes the mixer resume code to handle both the normal and reset resume in the same way, always restoring the original mixer element values. This allows us to unify the both callbacks as well as dropping the no longer used reset_resume field, which ends up with a good code reduction. A slight behavior change by this patch is that now we assign restore_mixer_value() as the default resume callback, and the function is no longer called at reset-resume when the resume callback is overridden by the quirk function. That is, if needed, the quirk resume function would have to handle similarly as restore_mixer_value() by itself. Reported-by: En-Shuo Hsu <enshuo@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Link: https://lore.kernel.org/r/CADDZ45UPsbpAAqP6=ZkTT8BE-yLii4Y7xSDnjK550G2DhQsMew@mail.gmail.com Link: https://lore.kernel.org/r/20210910105155.12862-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 September 2021, 13:00:31 UTC |
| 6f44578 | Takashi Iwai | 13 September 2021, 12:43:30 UTC | Revert "ALSA: hda: Drop workaround for a hang at shutdown again" This reverts commit 8fc8e903156f42c66245838441d03607e9067381. It was expected that the fixes in HD-audio codec side would make the workaround redundant, but unfortunately it doesn't seem sufficing. Resurrect the workaround for now. Fixes: 8fc8e903156f ("ALSA: hda: Drop workaround for a hang at shutdown again") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210913124330.24530-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 September 2021, 12:54:37 UTC |
| 64794d6 | Takashi Sakamoto | 13 September 2021, 02:10:42 UTC | ALSA: oxfw: fix transmission method for Loud models based on OXFW971 Loud Technologies Mackie Onyx 1640i (former model) is identified as the model which uses OXFW971. The analysis of packet dump shows that it transfers events in blocking method of IEC 61883-6, however the default behaviour of ALSA oxfw driver is for non-blocking method. This commit adds code to detect it assuming that all of loud models based on OXFW971 have such quirk. It brings no functional change except for alignment rule of PCM buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210913021042.10085-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 September 2021, 05:31:58 UTC |
| 6880fa6 | Linus Torvalds | 12 September 2021, 23:28:37 UTC | Linux 5.15-rc1 | 12 September 2021, 23:28:37 UTC |
| b5b65f1 | Linus Torvalds | 12 September 2021, 23:18:15 UTC | Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ... | 12 September 2021, 23:18:15 UTC |
| c3e4687 | Linus Torvalds | 12 September 2021, 23:09:26 UTC | Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4 | 12 September 2021, 23:09:26 UTC |
| d41adc4 | Linus Torvalds | 12 September 2021, 23:00:49 UTC | Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example | 12 September 2021, 23:00:49 UTC |
| f306b90 | Linus Torvalds | 12 September 2021, 19:42:51 UTC | Merge tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION() | 12 September 2021, 19:42:51 UTC |
| d8e988b | Linus Torvalds | 12 September 2021, 18:56:00 UTC | Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros | 12 September 2021, 18:56:00 UTC |
| 1791596 | Linus Torvalds | 12 September 2021, 18:44:58 UTC | Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message | 12 September 2021, 18:44:58 UTC |
| 56c2443 | Linus Torvalds | 12 September 2021, 18:37:41 UTC | Merge tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context | 12 September 2021, 18:37:41 UTC |
| 165d05d | Linus Torvalds | 12 September 2021, 18:27:05 UTC | Merge tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT | 12 September 2021, 18:27:05 UTC |
| 7bf3142 | Linus Torvalds | 12 September 2021, 18:10:31 UTC | Merge tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns() | 12 September 2021, 18:10:31 UTC |
| fdfc346 | Linus Torvalds | 12 September 2021, 17:43:51 UTC | Merge branch 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked | 12 September 2021, 17:43:51 UTC |
| 8d4a0b5 | Linus Torvalds | 12 September 2021, 17:10:21 UTC | Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions | 12 September 2021, 17:10:21 UTC |
| 78e7095 | Linus Torvalds | 11 September 2021, 21:48:42 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ... | 11 September 2021, 21:48:42 UTC |
| b79bd0d | Linus Torvalds | 11 September 2021, 21:29:42 UTC | Merge tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME | 11 September 2021, 21:29:42 UTC |
| 4e1c754 | Linus Torvalds | 11 September 2021, 21:22:28 UTC | Merge branch 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive | 11 September 2021, 21:22:28 UTC |
| 17a99e5 | Arnaldo Carvalho de Melo | 03 May 2021, 14:48:26 UTC | tools headers UAPI: Update tools's copy of drm.h headers Picking the changes from: 17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:24:10 UTC |
| 4dc24d7 | Arnaldo Carvalho de Melo | 11 September 2021, 19:18:28 UTC | tools headers UAPI: Sync drm/i915_drm.h with the kernel sources To pick the changes in: b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management") 81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete") 7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI") c649432e86ca677d ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:21:22 UTC |
| 2bae3e6 | Arnaldo Carvalho de Melo | 21 May 2021, 19:00:31 UTC | tools headers UAPI: Sync linux/fs.h with the kernel sources To pick the change in: 7957d93bf32bc211 ("block: add ioctl to read the disk sequence number") It adds a new ioctl, but we are still not using that to generate tables for 'perf trace', so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Jens Axboe <axboe@kernel.dk> Cc: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:14:53 UTC |
| ee286c6 | Arnaldo Carvalho de Melo | 19 June 2021, 13:15:22 UTC | tools headers UAPI: Sync linux/in.h copy with the kernel sources To pick the changes in: db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member") That don't result in any change in tooling, the structs changed remains with the same layout. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:12:26 UTC |
| 0d1c50a | Ian Rogers | 10 September 2021, 22:57:56 UTC | perf tools: Add an option to build without libbfd Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tony garnock-jones <tonyg@leastfixedpoint.com> Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:06:52 UTC |
| 4a86d41 | Namhyung Kim | 10 September 2021, 22:46:30 UTC | perf tools: Allow build-id with trailing zeros Currently perf saves a build-id with size but old versions assumes the size of 20. In case the build-id is less than 20 (like for MD5), it'd fill the rest with 0s. I saw a problem when old version of perf record saved a binary in the build-id cache and new version of perf reads the data. The symbols should be read from the build-id cache (as the path no longer has the same binary) but it failed due to mismatch in the build-id. symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf. The build-id event in the data has 20 byte build-ids, but it saw a different size (16) when it reads the build-id of the elf file in the build-id cache. $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf Displaying notes found in: .note.gnu.build-id Owner Data size Description GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring) Build ID: 53e4c2f42a4c61a2d632d92a72afa08f Let's fix this by allowing trailing zeros if the size is different. Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:04:47 UTC |
| 99fc594 | Adrian Hunter | 09 September 2021, 12:55:08 UTC | perf tools: Fix hybrid config terms list corruption A config terms list was spliced twice, resulting in a never-ending loop when the list was traversed. Fix by using list_splice_init() and copying and freeing the lists as necessary. This patch also depends on patch "perf tools: Factor out copy_config_terms() and free_config_terms()" Example on ADL: Before: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & # jobs [1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname # perf top -E 10 PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 97.60% perf [.] __evsel__get_config_term 0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13 0.24% perf [.] kallsyms__parse 0.15% [kernel] [k] _raw_spin_lock 0.14% [kernel] [k] number 0.13% [kernel] [k] advance_transaction 0.08% [kernel] [k] format_decode 0.08% perf [.] map__process_kallsym_symbol 0.08% perf [.] rb_insert_color 0.08% [kernel] [k] vsnprintf exiting. # kill %1 After: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # perf script | head perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms]) Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events") Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events") Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:00:34 UTC |
| a7d212f | Adrian Hunter | 09 September 2021, 12:55:07 UTC | perf tools: Factor out copy_config_terms() and free_config_terms() Factor out copy_config_terms() and free_config_terms() so that they can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 19:00:13 UTC |
| eb34363 | Adrian Hunter | 11 September 2021, 12:05:50 UTC | perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields Some fields are missing and text_poke is duplicated. Fix that up. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 18:58:36 UTC |
| da4572d | Ian Rogers | 10 September 2021, 23:22:49 UTC | perf tools: Ignore Documentation dependency file When building directly on the checked out repository the build process produces a file that should be ignored, so add it to .gitignore. Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 11 September 2021, 18:36:16 UTC |
| c605c39 | Linus Torvalds | 11 September 2021, 17:28:14 UTC | Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right now as we have plenty of flags left, but could become one. (Hao) - Fix lockdep issue introduced in this merge window (me) - Fix a few issues with the worker creation (me, Pavel, Qiang) - Fix regression with wq_has_sleeper() for IOPOLL (Pavel) - Timeout link error propagation fix (Pavel) * tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block: io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT io_uring: fail links of cancelled timeouts io-wq: fix memory leak in create_io_worker() io-wq: fix silly logic error in io_task_work_match() io_uring: drop ctx->uring_lock before acquiring sqd->lock io_uring: fix missing mb() before waitqueue_active io-wq: fix cancellation on create-worker failure | 11 September 2021, 17:28:14 UTC |
| c0f7e49 | Linus Torvalds | 11 September 2021, 17:19:51 UTC | Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix nvmet command set reporting for passthrough controllers (Adam Manzanares) - update a MAINTAINERS email address (Chaitanya Kulkarni) - set QUEUE_FLAG_NOWAIT for nvme-multipth (me) - handle errors from add_disk() (Luis Chamberlain) - update the keep alive interval when kato is modified (Tatsuya Sasaki) - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke) - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner) - only call synchronize_srcu when clearing current path (Daniel Wagner) - revalidate paths during rescan (Hannes Reinecke) - Split out the fs/block_dev into block/fops.c and block/bdev.c, which has been long overdue. Do this now before -rc1, to avoid annoying conflicts due to this (Christoph) - blk-throtl use-after-free fix (Li) - Improve plug depth for multi-device plugs, greatly increasing md resync performance (Song) - blkdev_show() locking fix (Tetsuo) - n64cart error check fix (Yang) * tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block: n64cart: fix return value check in n64cart_probe() blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues block: move fs/block_dev.c to block/bdev.c block: split out operations on block special files blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() block: genhd: don't call blkdev_show() with major_names_lock held nvme: update MAINTAINERS email address nvme: add error handling support for add_disk() nvme: only call synchronize_srcu when clearing current path nvme: update keep alive interval when kato is modified nvme-tcp: Do not reset transport on data digest errors nvmet: fixup buffer overrun in nvmet_subsys_attr_serial() nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req nvmet: looks at the passthrough controller when initializing CAP nvme: move nvme_multi_css into nvme.h nvme-multipath: revalidate paths during rescan nvme-multipath: set QUEUE_FLAG_NOWAIT | 11 September 2021, 17:19:51 UTC |
| 8177a5c | Linus Torvalds | 11 September 2021, 17:18:20 UTC | Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block Pull libata maintainer update from Jens Axboe: "Damien agreed to take over maintainership of libata, and he would be a great candidate for it. Update the MAINTAINERS entry to reflect the change in maintainer and git tree" * tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block: libata: pass over maintainership to Damien Le Moal | 11 September 2021, 17:18:20 UTC |
| ce4c8f8 | Linus Torvalds | 11 September 2021, 17:16:30 UTC | Merge tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Minor fixes to the processing of the bootconfig tree" * tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey() tracing/boot: Fix to check the histogram control param is a leaf node tracing/boot: Fix trace_boot_hist_add_array() to check array is value | 11 September 2021, 17:16:30 UTC |
| a1406e4 | Linus Torvalds | 11 September 2021, 17:12:46 UTC | Merge tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable fw_devlinks on x86 DT platforms to fix OLPC - More replacing oneOf+const with enum on a few new schemas - Drop unnecessary type references on Xilinx SPI binding schema * tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: spi: dt-bindings: xilinx: Drop type reference on *-bits properties dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries of: property: Disable fw_devlink DT support for X86 | 11 September 2021, 17:12:46 UTC |
| 2aae0a9 | Linus Torvalds | 11 September 2021, 17:05:56 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One patch to fix an unused variable warning in a Qualcomm clk driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sm6350: Remove unused variable | 11 September 2021, 17:05:56 UTC |
| 107ccc4 | Linus Torvalds | 11 September 2021, 16:54:53 UTC | Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The broken down time conversion is similar to what is done in the time subsystem since v5.14. The rest is fairly straightforward. Subsystem: - Switch to Neri and Schneider time conversion algorithm Drivers: - rx8025: add rx8035 support - s5m: modernize driver and set range" * tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rx8010: select REGMAP_I2C dt-bindings: rtc: add Epson RX-8025 and RX-8035 rtc: rx8025: implement RX-8035 support rtc: cmos: remove stale REVISIT comments rtc: tps65910: Correct driver module alias rtc: move RTC_LIB_KUNIT_TEST to proper location rtc: lib_test: add MODULE_LICENSE rtc: Improve performance of rtc_time64_to_tm(). Add tests. rtc: s5m: set range rtc: s5m: enable wakeup only when available rtc: s5m: signal the core when alarm are not available rtc: s5m: switch to devm_rtc_allocate_device | 11 September 2021, 16:54:53 UTC |
| 5292622 | Linus Torvalds | 11 September 2021, 16:47:33 UTC | Merge tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: - Migrate the bus snooper driver 'nosy' from PCI to DMA API - Small janitorial cleanup in the IPv4/v6-over-1394 driver [ The 'nosy' change already come in as a different commit through Greg KH in the misc tree back in the previous merge window, so only the cleanup ends up being new to 5.15 - Linus ] * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: switch from 'pci_' to 'dma_' API firewire: net: remove unused variable 'guid' | 11 September 2021, 16:47:33 UTC |
| 6701e7e | Linus Torvalds | 11 September 2021, 16:26:00 UTC | Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes this time around are mostly janitorial in nature. A lot of this is simplifications of drivers using device-managed functions and improving compilation coverage. The Mediatek display PWM driver now supports the atomic API. Cleanups and minor fixes make up the remainder of this set" * tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits) pwm: mtk-disp: Implement atomic API .get_state() pwm: mtk-disp: Fix overflow in period and duty calculation pwm: mtk-disp: Implement atomic API .apply() pwm: mtk-disp: Adjust the clocks to avoid them mismatch dt-bindings: pwm: rockchip: Add description for rk3568 pwm: Make pwmchip_remove() return void pwm: sun4i: Don't check the return code of pwmchip_remove() pwm: sifive: Don't check the return code of pwmchip_remove() pwm: samsung: Don't check the return code of pwmchip_remove() pwm: renesas-tpu: Don't check the return code of pwmchip_remove() pwm: rcar: Don't check the return code of pwmchip_remove() pwm: pca9685: Don't check the return code of pwmchip_remove() pwm: omap-dmtimer: Don't check the return code of pwmchip_remove() pwm: mtk-disp: Don't check the return code of pwmchip_remove() pwm: imx-tpm: Don't check the return code of pwmchip_remove() pwm: img: Don't check the return code of pwmchip_remove() pwm: cros-ec: Don't check the return code of pwmchip_remove() pwm: brcmstb: Don't check the return code of pwmchip_remove() pwm: atmel-tcb: Don't check the return code of pwmchip_remove() pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove() ... | 11 September 2021, 16:26:00 UTC |
| dd47038 | Linus Torvalds | 11 September 2021, 16:20:57 UTC | Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) * tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used thermal/drivers/intel: Allow processing of HWP interrupt dt-bindings: thermal: Add dt binding for QCOM LMh thermal/drivers/qcom: Add support for LMh driver firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/tegra-soctherm: Silence message about clamped temperature thermal: Spelling s/scallbacks/callbacks/ dt-bindings: thermal: Make trips node optional thermal/core: Fix thermal_cooling_device_register() prototype thermal/drivers/int340x: Use IMOK independently tools/thermal/tmon: Add cross compiling support thermal/tools/tmon: Improve the Makefile MAINTAINERS: Add missing userspace thermal tools to the thermal section thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions. thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra: Add driver for Tegra30 thermal sensor | 11 September 2021, 16:20:57 UTC |
| 765092e | Linus Torvalds | 11 September 2021, 16:08:28 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ... | 11 September 2021, 16:08:28 UTC |
| 6f55ab3 | Jisheng Zhang | 26 August 2021, 14:11:18 UTC | riscv: Move EXCEPTION_TABLE to RO_DATA segment _ex_table section is read-only, so move it to RO_DATA. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 06:59:48 UTC |
| 54fed35 | Jisheng Zhang | 26 August 2021, 14:10:29 UTC | riscv: Enable BUILDTIME_TABLE_SORT Enable BUILDTIME_TABLE_SORT to sort the exception table at build time rather than during boot. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 06:59:44 UTC |
| cbba178 | Geert Uytterhoeven | 26 August 2021, 13:19:39 UTC | riscv: dts: microchip: mpfs-icicle: Fix serial console Currently, nothing is output on the serial console, unless "console=ttyS0,115200n8" or "earlycon" are appended to the kernel command line. Enable automatic console selection using chosen/stdout-path by adding a proper alias, and configure the expected serial rate. While at it, add aliases for the other three serial ports, which are provided on the same micro-USB connector as the first one. Fixes: 0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 06:58:19 UTC |
| 399c1ec | Masahiro Yamada | 29 July 2021, 14:21:47 UTC | riscv: move the (z)install rules to arch/riscv/Makefile Currently, the (z)install targets in arch/riscv/Makefile descend into arch/riscv/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/riscv/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 06:08:26 UTC |
| d593553 | Kefeng Wang | 12 August 2021, 11:47:02 UTC | riscv: Improve stack randomisation on RV64 This enlarges the bits availiable for stack randomisation on RV64 from the default of 8MiB to 1GiB, to match arm64 and x86. Also, update the documentation to reflect our support for stack randomisation. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [Palmer: commit text] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 05:25:34 UTC |
| efe1e08 | Heinrich Schuchardt | 12 August 2021, 08:10:27 UTC | riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 The EFI system partition uses the FAT file system. Many distributions add an entry in /etc/fstab for the ESP. We must ensure that mounting does not fail. The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE). The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1). So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 04:31:12 UTC |
| 3a87ff8 | Heinrich Schuchardt | 12 August 2021, 08:10:26 UTC | riscv: defconfig: enable BLK_DEV_NVME NVMe is a non-volatile storage media attached via PCIe. As NVMe has much higher throughput than other block devices like SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME. The HiFive Unmatched is a board providing M.2 slots for NVMe drives. Enable CONFIG_PCIE_FU740. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 11 September 2021, 04:31:05 UTC |
| c9871c8 | Thomas Gleixner | 09 September 2021, 12:34:59 UTC | Documentation: core-api/cpuhotplug: Rewrite the API section Dave stumbled over the incomplete and confusing documentation of the CPU hotplug API. Rewrite it, add the missing function documentations and correct the existing ones. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210909123212.489059409@linutronix.de | 10 September 2021, 22:41:21 UTC |
| 8c85430 | Sebastian Andrzej Siewior | 03 August 2021, 14:16:21 UTC | cpu/hotplug: Remove deprecated CPU-hotplug functions. No users in tree use the deprecated CPU-hotplug functions anymore. Remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210803141621.780504-39-bigeasy@linutronix.de | 10 September 2021, 22:41:21 UTC |
| c122358 | Sebastian Andrzej Siewior | 03 August 2021, 14:16:02 UTC | thermal: Replace deprecated CPU-hotplug functions. The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210803141621.780504-20-bigeasy@linutronix.de | 10 September 2021, 22:41:21 UTC |
| c2f4954 | Thomas Gleixner | 10 September 2021, 22:38:47 UTC | Merge branch 'linus' into smp/urgent Ensure that all usage sites of get/put_online_cpus() except for the struggler in drivers/thermal are gone. So the last user and the deprecated inlines can be removed. | 10 September 2021, 22:38:47 UTC |
