| 29774f3 | Mathieu Malaterre | 16 July 2019, 23:29:15 UTC | fs/hfsplus/xattr.c: replace strncpy with memcpy strncpy() was used to copy a fixed size buffer. Since NUL-terminating string is not required here, prefer a memcpy function. The generated code (ppc32) remains the same. Silence the following warning triggered using W=1: fs/hfsplus/xattr.c:410:3: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] Link: http://lkml.kernel.org/r/20190529113341.11972-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| a9fba24 | Pedro Cuadra | 16 July 2019, 23:29:13 UTC | coda: add hinting support for partial file caching This adds support for partial file caching in Coda. Every read, write and mmap informs the userspace cache manager about what part of a file is about to be accessed so that the cache manager can ensure the relevant parts are available before the operation is allowed to proceed. When a read or write operation completes, this is also reported to allow the cache manager to track when partially cached content can be released. If the cache manager does not support partial file caching, or when the entire file has been fetched into the local cache, the cache manager may return an EOPNOTSUPP error to indicate that intent upcalls are no longer necessary until the file is closed. [akpm@linux-foundation.org: little whitespace fixup] Link: http://lkml.kernel.org/r/20190618181301.6960-1-jaharkes@cs.cmu.edu Signed-off-by: Pedro Cuadra <pjcuadra@gmail.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 5bb4481 | Fabian Frederick | 16 July 2019, 23:29:09 UTC | coda: ftoc validity check integration This patch moves cfi check in coda_ftoc() instead of repeating it in the wild. Module size text data bss dec hex filename 28297 1040 700 30037 7555 fs/coda/coda.ko.before 28263 980 700 29943 74f7 fs/coda/coda.ko.after Link: http://lkml.kernel.org/r/a2c27663ec4547018c92d71c63b1dff4650b6546.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 7f6118c | Fabian Frederick | 16 July 2019, 23:29:06 UTC | coda: remove sb test in coda_fid_to_inode() coda_fid_to_inode() is only called by coda_downcall() where sb is already being tested. Link: http://lkml.kernel.org/r/d2163b3136348faf83ba47dc2d65a5d0a9a135dd.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 6975259 | Fabian Frederick | 16 July 2019, 23:29:03 UTC | coda: remove sysctl object from module when unused Inspired by NFS sysctl process Link: http://lkml.kernel.org/r/9afcc2cd09490849b309786bbf47fef75de7f91c.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| f948452 | Fabian Frederick | 16 July 2019, 23:29:00 UTC | coda: add __init to init_coda_psdev() init_coda_psdev() was only called by __init function. Link: http://lkml.kernel.org/r/a12a5a135fa6b0ea997e1a0af4be0a235c463a24.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 50e9a6e | Fabian Frederick | 16 July 2019, 23:28:57 UTC | coda: use SIZE() for stat max_t expression was already defined in coda sources Link: http://lkml.kernel.org/r/e6cda497ce8691db155cb35f8d13ea44ca6cedeb.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 79a0d65 | Fabian Frederick | 16 July 2019, 23:28:54 UTC | coda: destroy mutex in put_super() We can safely destroy vc_mutex at the end of umount process. Link: http://lkml.kernel.org/r/f436f68908c467c5663bc6a9251b52cd7b95d2a5.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 6dc280e | Jan Harkes | 16 July 2019, 23:28:51 UTC | coda: remove uapi/linux/coda_psdev.h Nothing is left in this header that is used by userspace. Link: http://lkml.kernel.org/r/bb11378cef94739f2cf89425dd6d302a52c64480.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 8fc8b9d | David Howells | 16 July 2019, 23:28:47 UTC | coda: move internal defs out of include/linux/ [ver #2] Move include/linux/coda_psdev.h to fs/coda/ as there's nothing else that uses it. Link: http://lkml.kernel.org/r/3ceeee0415a929b89fb02700b6b4b3a07938acb8.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10590257/ Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| b6a18c6 | Jan Harkes | 16 July 2019, 23:28:44 UTC | coda: bump module version The out of tree module version had been bumped several times already, but we haven't kept this in-tree one in sync, partly because most changes go from here to the out-of-tree copy. Link: http://lkml.kernel.org/r/8b0ab50a2da2f0180ac32c79d91811b4d1d0bd8b.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 936dae4 | Dan Carpenter | 16 July 2019, 23:28:41 UTC | coda: get rid of CODA_FREE() The CODA_FREE() macro just calls kvfree(). We can call that directly instead. Link: http://lkml.kernel.org/r/4950a94fd30ec5f84835dd4ca0bb67c0448672f5.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 4dc4819 | Dan Carpenter | 16 July 2019, 23:28:38 UTC | coda: get rid of CODA_ALLOC() These days we have kvzalloc() so we can delete CODA_ALLOC(). I made a couple related changes in coda_psdev_write(). First, I added some error handling to avoid a NULL dereference if the allocation failed. Second, I used kvmalloc() instead of kvzalloc() because we copy over the memory on the next line so there is no need to zero it first. Link: http://lkml.kernel.org/r/e56010c822e7a7cbaa8a238cf82ad31c67eaa800.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 5e7c31d | Jan Harkes | 16 July 2019, 23:28:35 UTC | coda: change Coda's user api to use 64-bit time_t in timespec Move the 32-bit time_t problems to userspace. Link: http://lkml.kernel.org/r/8d089068823bfb292a4020f773922fbd82ffad39.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 6ced9aa | Arnd Bergmann | 16 July 2019, 23:28:32 UTC | coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 8506221 | Colin Ian King | 16 July 2019, 23:28:29 UTC | coda: clean up indentation, replace spaces with tab Trivial fix to clean up indentation, replace spaces with tab Link: http://lkml.kernel.org/r/ffc2bfa5a37ffcdf891c51b2e2ed618103965b24.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 2fe7491 | Jan Harkes | 16 July 2019, 23:28:26 UTC | uapi linux/coda_psdev.h: move CODA_REQ_ from uapi to kernel side headers These constants only used internally and not exposed to userspace. Link: http://lkml.kernel.org/r/baeafc30dad70d8b422ee679420099c2d8aa7da0.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 9a05671 | Jan Harkes | 16 July 2019, 23:28:23 UTC | coda: don't try to print names that were considered too long Probably safer to just show the unexpected length and debug it from the userspace side. Link: http://lkml.kernel.org/r/582ae759a4fdfa31a64c35de489fa4efabac09d6.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| b2a57e3 | Sam Protsenko | 16 July 2019, 23:28:20 UTC | coda: fix build using bare-metal toolchain The kernel is self-contained project and can be built with bare-metal toolchain. But bare-metal toolchain doesn't define __linux__. Because of this u_quad_t type is not defined when using bare-metal toolchain and codafs build fails. This patch fixes it by defining u_quad_t type unconditionally. Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 6e51f8a | Jan Harkes | 16 July 2019, 23:28:16 UTC | coda: potential buffer overflow in coda_psdev_write() Add checks to make sure the downcall message we got from the Coda cache manager is large enough to contain the data it is supposed to have. i.e. when we get a CODA_ZAPDIR we can access &out->coda_zapdir.CodaFid. Link: http://lkml.kernel.org/r/894fb6b250add09e4e3935f14649f21284a5cb18.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 02551c2 | Zhouyang Jia | 16 July 2019, 23:28:13 UTC | coda: add error handling for fget When fget fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling fget. Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| f90fb3c | Mikko Rapeli | 16 July 2019, 23:28:10 UTC | uapi linux/coda_psdev.h: move upc_req definition from uapi to kernel side headers Only users of upc_req in kernel side fs/coda/psdev.c and fs/coda/upcall.c already include linux/coda_psdev.h. Suggested by Jan Harkes <jaharkes@cs.cmu.edu> in https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/ Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace: linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type struct list_head uc_chain; ^ linux/coda_psdev.h:13:2: error: unknown type name `caddr_t' caddr_t uc_data; ^ linux/coda_psdev.h:14:2: error: unknown type name `u_short' u_short uc_flags; ^ linux/coda_psdev.h:15:2: error: unknown type name `u_short' u_short uc_inSize; /* Size is at most 5000 bytes */ ^ linux/coda_psdev.h:16:2: error: unknown type name `u_short' u_short uc_outSize; ^ linux/coda_psdev.h:17:2: error: unknown type name `u_short' u_short uc_opcode; /* copied from data to save lookup */ ^ linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t' wait_queue_head_t uc_sleep; /* process' wait queue */ ^ Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 694a58e | Mikko Rapeli | 16 July 2019, 23:28:07 UTC | uapi linux/coda.h: use __kernel_pid_t for userspace Part of a patch by Mikko Rapeli, as Arnd Bergman commented on the original patch. pid_t might differ between libc and the kernel, so the kernel interface has to use types that the kernel defines. Link: http://lkml.kernel.org/r/f374a71f4d351bc8c8b3ac18ad7765c88d806d10.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:23 UTC |
| 7fa0a1d | Jan Harkes | 16 July 2019, 23:28:04 UTC | coda: pass the host file in vma->vm_file on mmap Patch series "Coda updates". The following patch series is a collection of various fixes for Coda, most of which were collected from linux-fsdevel or linux-kernel but which have as yet not found their way upstream. This patch (of 22): Various file systems expect that vma->vm_file points at their own file handle, several use file_inode(vma->vm_file) to get at their inode or use vma->vm_file->private_data. However the way Coda wrapped mmap on a host file broke this assumption, vm_file was still pointing at the Coda file and the host file systems would scribble over Coda's inode and private file data. This patch fixes the incorrect expectation and wraps vm_ops->open and vm_ops->close to allow Coda to track when the vm_area_struct is destroyed so we still release the reference on the Coda file handle at the right time. Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| b98cca4 | Anshuman Khandual | 16 July 2019, 23:28:00 UTC | mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault() Architectures which support kprobes have very similar boilerplate around calling kprobe_fault_handler(). Use a helper function in kprobes.h to unify them, based on the x86 code. This changes the behaviour for other architectures when preemption is enabled. Previously, they would have disabled preemption while calling the kprobe handler. However, preemption would be disabled if this fault was due to a kprobe, so we know the fault was not due to a kprobe handler and can simply return failure. This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes: Refactor kprobes_fault() like kprobe_exceptions_notify()") [anshuman.khandual@arm.com: export kprobe_fault_handler()] Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: James Hogan <jhogan@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 92bae78 | Kees Cook | 16 July 2019, 23:27:57 UTC | init/Kconfig: fix neighboring typos This fixes a couple typos I noticed in the slab Kconfig: sacrifies -> sacrifices accellerate -> accelerate Seeing as no other instances of these typos are found elsewhere in the kernel and that I originally added one of the two, I can only assume working on slab must have caused damage to the spelling centers of my brain. Link: http://lkml.kernel.org/r/201905292203.CD000546EB@keescook Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| aa94b1d | Alexey Dobriyan | 16 July 2019, 23:27:54 UTC | fs/binfmt_elf.c: delete stale comment "passed_fileno" variable was deleted 11 years ago in 2.6.25. Link: http://lkml.kernel.org/r/20190529201747.GA23248@avx2 Fixes: d20894a23708 ("Remove a.out interpreter support in ELF loader") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 1b113e0 | YueHaibing | 16 July 2019, 23:27:51 UTC | fs/binfmt_flat.c: remove set but not used variable 'inode' Fixes gcc '-Wunused-but-set-variable' warning: fs/binfmt_flat.c: In function load_flat_file: fs/binfmt_flat.c:419:16: warning: variable inode set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190525125341.9844-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 6a8d76c | Matteo Croce | 16 July 2019, 23:27:48 UTC | checkpatch.pl: warn on duplicate sysctl local variable Commit d91bff3011cf ("proc/sysctl: add shared variables for range check") adds some shared const variables to be used instead of a local copy in each source file. Warn when a chunk duplicates one of these values in a ctl_table struct: $ scripts/checkpatch.pl 0001-test-commit.patch WARNING: duplicated sysctl range checking value 'zero', consider using the shared one in include/linux/sysctl.h #27: FILE: arch/arm/kernel/isa.c:48: + .extra1 = &zero, WARNING: duplicated sysctl range checking value 'int_max', consider using the shared one in include/linux/sysctl.h #28: FILE: arch/arm/kernel/isa.c:49: + .extra2 = &int_max, total: 0 errors, 2 warnings, 14 lines checked Link: http://lkml.kernel.org/r/20190531131422.14970-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 9f973cb | Michel Lespinasse | 16 July 2019, 23:27:45 UTC | lib/rbtree: avoid generating code twice for the cached versions As was already noted in rbtree.h, the logic to cache rb_first (or rb_last) can easily be implemented externally to the core rbtree api. Change the implementation to do just that. Previously the update of rb_leftmost was wired deeper into the implmentation, but there were some disadvantages to that - mostly, lib/rbtree.c had separate instantiations for rb_insert_color() vs rb_insert_color_cached(), as well as rb_erase() vs rb_erase_cached(), which were doing exactly the same thing save for the rb_leftmost update at the start of either function. text data bss dec hex filename 5405 120 0 5525 1595 lib/rbtree.o-vanilla 3827 96 0 3923 f53 lib/rbtree.o-patch [dave@stgolabs.net: changelog addition] Link: http://lkml.kernel.org/r/20190628171416.by5gdizl3rcxk5h5@linux-r8p5 [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190628045008.39926-1-walken@google.com Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 4ab7ace | Alexander Potapenko | 16 July 2019, 23:27:42 UTC | lib/test_meminit.c: minor test fixes Fix the following issues in test_meminit.c: - |size| in fill_with_garbage_skip() should be signed so that it doesn't overflow if it's not aligned on sizeof(*p); - fill_with_garbage_skip() should actually skip |skip| bytes; - do_kmem_cache_size() should deallocate memory in the RCU case. Link: http://lkml.kernel.org/r/20190626133135.217355-1-glider@google.com Fixes: 7e659650cbda ("lib: introduce test_meminit module") Fixes: 94e8988d91c7 ("lib/test_meminit.c: fix -Wmaybe-uninitialized false positive") Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| d3a8116 | Arnd Bergmann | 16 July 2019, 23:27:39 UTC | lib/test_meminit.c: fix -Wmaybe-uninitialized false positive The conditional logic is too complicated for the compiler to fully comprehend: lib/test_meminit.c: In function 'test_meminit_init': lib/test_meminit.c:236:5: error: 'buf_copy' may be used uninitialized in this function [-Werror=maybe-uninitialized] kfree(buf_copy); ^~~~~~~~~~~~~~~ lib/test_meminit.c:201:14: note: 'buf_copy' was declared here Simplify it by splitting out the non-rcu section. Link: http://lkml.kernel.org/r/20190617131210.2190280-1-arnd@arndb.de Fixes: af734ee6ec85 ("lib: introduce test_meminit module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| b4658cd | Jonathan Corbet | 16 July 2019, 23:27:36 UTC | lib/string_helpers: fix some kerneldoc warnings Due to some sad limitations in how kerneldoc comments are parsed, the documentation in lib/string_helpers.c generates these warnings: lib/string_helpers.c:236: WARNING: Unexpected indentation. lib/string_helpers.c:241: WARNING: Block quote ends without a blank line; unexpected unindent. lib/string_helpers.c:446: WARNING: Unexpected indentation. lib/string_helpers.c:451: WARNING: Block quote ends without a blank line; unexpected unindent. lib/string_helpers.c:474: WARNING: Unexpected indentation. Rework the comments to obtain something like the desired result. Link: http://lkml.kernel.org/r/20190607110952.409011ba@lwn.net Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 0f472d0 | Anshuman Khandual | 16 July 2019, 23:27:33 UTC | mm/ioremap: probe platform for p4d huge map support Finish up what commit c2febafc6773 ("mm: convert generic code to 5-level paging") started while levelling up P4D huge mapping support at par with PUD and PMD. A new arch call back arch_ioremap_p4d_supported() is added which just maintains status quo (P4D huge map not supported) on x86, arm64 and powerpc. When HAVE_ARCH_HUGE_VMAP is enabled its just a simple check from the arch about the support, hence runtime effects are minimal. Link: http://lkml.kernel.org/r/1561699231-20991-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 6b95ab4 | Anshuman Khandual | 16 July 2019, 23:27:30 UTC | mm/ioremap: check virtual address alignment while creating huge mappings Virtual address alignment is essential in ensuring correct clearing for all intermediate level pgtable entries and freeing associated pgtable pages. An unaligned address can end up randomly freeing pgtable page that potentially still contains valid mappings. Hence also check it's alignment along with existing phys_addr check. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 5015a30 | Alexander Potapenko | 16 July 2019, 23:27:27 UTC | lib: introduce test_meminit module Add tests for heap and pagealloc initialization. These can be used to check init_on_alloc and init_on_free implementations as well as other approaches to initialization. Expected test output in the case the kernel provides heap initialization (e.g. when running with either init_on_alloc=1 or init_on_free=1): test_meminit: all 10 tests in test_pages passed test_meminit: all 40 tests in test_kvmalloc passed test_meminit: all 60 tests in test_kmemcache passed test_meminit: all 10 tests in test_rcu_persistent passed test_meminit: all 120 tests passed! Link: http://lkml.kernel.org/r/20190529123812.43089-4-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Sandeep Patil <sspatil@android.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 8e060c2 | Kees Cook | 16 July 2019, 23:27:24 UTC | lib/test_overflow.c: avoid tainting the kernel and fix wrap size This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to avoid tainting the kernel. Additionally fixes up the math on wrap size to be architecture and page size agnostic. Link: http://lkml.kernel.org/r/201905282012.0A8767E24@keescook Fixes: ca90800a91ba ("test_overflow: Add memory allocation overflow tests") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| d1a5dc5 | Peter Rosin | 16 July 2019, 23:27:21 UTC | lib/test_string.c: add some testcases for strchr and strnchr Make sure that the trailing NUL is considered part of the string and can be found. Link: http://lkml.kernel.org/r/20190506124634.6807-4-peda@axentia.se Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 33d6e0f | Peter Rosin | 16 July 2019, 23:27:18 UTC | lib/test_string.c: avoid masking memset16/32/64 failures If a memsetXX implementation is completely broken and fails in the first iteration, when i, j, and k are all zero, the failure is masked as zero is returned. Failing in the first iteration is perhaps the most likely failure, so this makes the tests pretty much useless. Avoid the situation by always setting a random unused bit in the result on failure. Link: http://lkml.kernel.org/r/20190506124634.6807-3-peda@axentia.se Fixes: 03270c13c5ff ("lib/string.c: add testcases for memset16/32/64") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| b097571 | Peter Rosin | 16 July 2019, 23:27:15 UTC | lib/string.c: allow searching for NUL with strnchr Patch series "lib/string: search for NUL with strchr/strnchr". I noticed an inconsistency where strchr and strnchr do not behave the same with respect to the trailing NUL. strchr is standardised and the kernel function conforms, and the kernel relies on the behavior. So, naturally strchr stays as-is and strnchr is what I change. While writing a few tests to verify that my new strnchr loop was sane, I noticed that the tests for memset16/32/64 had a problem. Since it's all about the lib/string.c file I made a short series of it all... This patch (of 3): strchr considers the terminating NUL to be part of the string, and NUL can thus be searched for with that function. For consistency, do the same with strnchr. Link: http://lkml.kernel.org/r/20190506124634.6807-2-peda@axentia.se Signed-off-by: Peter Rosin <peda@axentia.se> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 4c6080c | Alexey Dobriyan | 16 July 2019, 23:27:12 UTC | lib/list: tweak LIST_POISON2 for better code generation on x86_64 list_del() poisoning can generate 2 64-bit immediate loads but it also can generate one 64-bit immediate load and an addition: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 05 00 01 00 00 <=====> add rax,0x100 48 89 47 60 mov QWORD PTR [rdi+0x60],rax However on x86_64 not all constants are equal: those within [-128, 127] range can be added with shorter "add r64, imm32" instruction: 48 b8 00 01 00 00 00 00 ad de movabs rax,0xdead000000000100 48 89 47 58 mov QWORD PTR [rdi+0x58],rax 48 83 c0 22 <======> add rax,0x22 48 89 47 60 mov QWORD PTR [rdi+0x60],rax Patch saves 2 bytes per some LIST_POISON2 usage. (Slightly disappointing) space savings on F29 x86_64 config: add/remove: 0/0 grow/shrink: 0/2164 up/down: 0/-5184 (-5184) Function old new delta zstd_get_workspace 548 546 -2 ... mlx4_delete_all_resources_for_slave 4826 4804 -22 Total: Before=83304131, After=83298947, chg -0.01% New constants are: 0xdead000000000100 0xdead000000000122 Note: LIST_POISON1 can't be changed to ...11 because something in page allocator requires low bit unset. Link: http://lkml.kernel.org/r/20190513191502.GA8492@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 4966250 | Joe Perches | 16 July 2019, 23:27:09 UTC | get_maintainer: add ability to skip moderated mailing lists Add a command line switch --no-moderated to skip L: mailing lists marked with 'moderated'. Some people prefer not emailing moderated mailing lists as the moderation time can be indeterminate and some emails can be intentionally dropped by a moderator. This can cause fragmentation of email threads when some are subscribed to a moderated list but others are not and emails are dropped. Link: http://lkml.kernel.org/r/6f23c2918ad9fc744269feb8f909bdfb105c5afc.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| c296d4d | Qian Cai | 16 July 2019, 23:27:06 UTC | asm-generic: fix a compilation warning Fix this compilation warning on x86 by making flush_cache_vmap() inline. lib/ioremap.c: In function 'ioremap_page_range': lib/ioremap.c:214:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] unsigned long start; ^~~~~ While at it, convert all other similar functions to inline for consistency. Link: http://lkml.kernel.org/r/1562594592-15228-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 3a7f0ad | Stephen Kitt | 16 July 2019, 23:27:04 UTC | arch/*: remove unused isa_page_to_bus() isa_page_to_bus() is deprecated and is no longer used anywhere. Remove it entirely. Link: http://lkml.kernel.org/r/20190613161155.16946-1-steve@sk2.org Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| fe6ba88 | Masahiro Yamada | 16 July 2019, 23:27:01 UTC | arch: replace _BITUL() in kernel-space headers with BIT() Now that BIT() can be used from assembly code, we can safely replace _BITUL() with equivalent BIT(). UAPI headers are still required to use _BITUL(), but there is no more reason to use it in kernel headers. BIT() is shorter. Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 95b980d | Masahiro Yamada | 16 July 2019, 23:26:57 UTC | linux/bits.h: make BIT(), GENMASK(), and friends available in assembly BIT(), GENMASK(), etc. are useful to define register bits of hardware. However, low-level code is often written in assembly, where they are not available due to the hard-coded 1UL, 0UL. In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h use _BITUL() instead of BIT() so that the register bit macros are available in assembly. Using macros in include/uapi/linux/const.h have two reasons: [1] For use in uapi headers We should use underscore-prefixed variants for user-space. [2] For use in assembly code Since _BITUL() uses UL(1) instead of 1UL, it can be used as an alternative of BIT(). For [2], it is pretty easy to change BIT() etc. for use in assembly. This allows to replace _BUTUL() in kernel-space headers with BIT(). Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:22 UTC |
| 65f50f2 | Weitao Hou | 16 July 2019, 23:26:54 UTC | kernel: fix typos and some coding style in comments fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 5ec27ec | Radoslaw Burny | 16 July 2019, 23:26:51 UTC | fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes. Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357770e (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09b874 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09b874 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by: Radoslaw Burny <rburny@google.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 7dbbade | Alexey Dobriyan | 16 July 2019, 23:26:48 UTC | proc: test /proc/sysvipc vs setns(CLONE_NEWIPC) I thought that /proc/sysvipc has the same bug as /proc/net commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43 proc: fix /proc/net/* after setns(2) However, it doesn't! /proc/sysvipc files do get_ipc_ns(current->nsproxy->ipc_ns); in their open() hook and avoid the problem. Keep the test, maybe /proc/sysvipc will become broken someday :-\ Link: http://lkml.kernel.org/r/20190706180146.GA21015@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 9af27b2 | Alexey Dobriyan | 16 July 2019, 23:26:45 UTC | fs/proc/inode.c: use typeof_member() macro Don't repeat function signatures twice. This is a kind-of-precursor for "struct proc_ops". Note: typeof(pde->proc_fops->...) ...; can't be used because ->proc_fops is "const struct file_operations *". "const" prevents assignment down the code and it can't be deleted in the type system. Link: http://lkml.kernel.org/r/20190529191110.GB5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| ce251e0 | Alexey Dobriyan | 16 July 2019, 23:26:42 UTC | include/linux/kernel.h: add typeof_member() macro Add typeof_member() macro so that types can be extracted without introducing dummy variables. Link: http://lkml.kernel.org/r/20190529190720.GA5703@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| c6c4053 | Kairui Song | 16 July 2019, 23:26:39 UTC | vmcore: add a kernel parameter novmcoredd Since commit 2724273e8fd0 ("vmcore: add API to collect hardware dump in second kernel"), drivers are allowed to add device related dump data to vmcore as they want by using the device dump API. This has a potential issue, the data is stored in memory, drivers may append too much data and use too much memory. The vmcore is typically used in a kdump kernel which runs in a pre-reserved small chunk of memory. So as a result it will make kdump unusable at all due to OOM issues. So introduce new 'novmcoredd' command line option. User can disable device dump to reduce memory usage. This is helpful if device dump is using too much memory, disabling device dump could make sure a regular vmcore without device dump data is still available. [akpm@linux-foundation.org: tweak documentation] [akpm@linux-foundation.org: vmcore.c needs moduleparam.h] Link: http://lkml.kernel.org/r/20190528111856.7276-1-kasong@redhat.com Signed-off-by: Kairui Song <kasong@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Cc: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Cc: "David S . Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| bca1eac | Alexey Dobriyan | 16 July 2019, 23:26:36 UTC | tools/testing/selftests/proc/proc-pid-vm.c: hide "segfault at ffffffffff600000" dmesg spam Test tries to access vsyscall page and if it doesn't exist gets SIGSEGV which can spam into dmesg. However the segfault happens by design. Handle it and carry information via exit code to parent. Link: http://lkml.kernel.org/r/20190524181256.GA2260@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 9b98fa2 | Christoph Hellwig | 16 July 2019, 23:26:33 UTC | mm: stub out all of swapops.h for !CONFIG_MMU The whole header file deals with swap entries and PTEs, none of which can exist for nommu builds. The current nommu ports have lots of stubs to allow the inline functions in swapops.h to compile, but as none of this functionality is actually used there is no point in even providing it. This way we don't have to provide the stubs for the upcoming RISC-V nommu port, and can eventually remove it from the existing ports. Link: http://lkml.kernel.org/r/20190703122359.18200-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 89165b8 | Christoph Hellwig | 16 July 2019, 23:26:30 UTC | mm: provide a print_vma_addr stub for !CONFIG_MMU Link: http://lkml.kernel.org/r/20190703122359.18200-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 0bf5f94 | Christoph Hellwig | 16 July 2019, 23:26:27 UTC | mm: fix the MAP_UNINITIALIZED flag We can't expose UAPI symbols differently based on CONFIG_ symbols, as userspace won't have them available. Instead always define the flag, but only respect it based on the config option. Link: http://lkml.kernel.org/r/20190703122359.18200-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| c633324 | Doug Berger | 16 July 2019, 23:26:24 UTC | mm/cma.c: fail if fixed declaration can't be honored The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| c92d2f3 | Henry Burns | 16 July 2019, 23:26:21 UTC | mm/z3fold.c: reinitialize zhdr structs after migration z3fold_page_migration() calls memcpy(new_zhdr, zhdr, PAGE_SIZE). However, zhdr contains fields that can't be directly coppied over (ex: list_head, a circular linked list). We only need to initialize the linked lists in new_zhdr, as z3fold_isolate_page() already ensures that these lists are empty Additionally it is possible that zhdr->work has been placed in a workqueue. In this case we shouldn't migrate the page, as zhdr->work references zhdr as opposed to new_zhdr. Link: http://lkml.kernel.org/r/20190716000520.230595-1-henryburns@google.com Fixes: 1f862989b04ade61d3 ("mm/z3fold.c: support page migration") Signed-off-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Vitaly Vul <vitaly.vul@sony.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| be03074 | Henry Burns | 16 July 2019, 23:26:18 UTC | mm/z3fold.c: remove z3fold_migration trylock z3fold_page_migrate() will never succeed because it attempts to acquire a lock that has already been taken by migrate.c in __unmap_and_move(). __unmap_and_move() migrate.c trylock_page(oldpage) move_to_new_page(oldpage_newpage) a_ops->migrate_page(oldpage, newpage) z3fold_page_migrate(oldpage, newpage) trylock_page(oldpage) Link: http://lkml.kernel.org/r/20190710213238.91835-1-henryburns@google.com Fixes: 1f862989b04a ("mm/z3fold.c: support page migration") Signed-off-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Vitaly Vul <vitaly.vul@sony.com> Cc: Jonathan Adams <jwadams@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Snild Dolkow <snild@sony.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 1732d2b | Andrew Morton | 16 July 2019, 23:26:15 UTC | mm/vmscan.c: add checks for incorrect handling of current->reclaim_state Six sites are presently altering current->reclaim_state. There is a risk that one function stomps on a caller's value. Use a helper function to catch such errors. Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 0308f7c | Yafang Shao | 16 July 2019, 23:26:12 UTC | mm/vmscan.c: calculate reclaimed slab caches in all reclaim paths There are six different reclaim paths by now: - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. There're some drawbacks if we don't calculate the reclaimed slab caches. - The sc->nr_reclaimed isn't correct if there're some slab caches relcaimed in this path. - The slab caches may be reclaimed thoroughly if there're lots of reclaimable slab caches and few page caches. Let's take an easy example for this case. If one memcg is full of slab caches and the limit of it is 512M, in other words there're approximately 512M slab caches in this memcg. Then the limit of the memcg is reached and the memcg reclaim begins, and then in this memcg reclaim path it will continuesly reclaim the slab caches until the sc->priority drops to 0. After this reclaim stops, you will find there're few slab caches left, which is less than 20M in my test case. While after this patch applied the number is greater than 300M and the sc->priority only drops to 3. Link: http://lkml.kernel.org/r/1561112086-6169-3-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| e5ca807 | Yafang Shao | 16 July 2019, 23:26:09 UTC | mm/vmscan.c: add a new member reclaim_state in struct shrink_control Patch series "mm/vmscan: calculate reclaimed slab in all reclaim paths". This patchset is to fix the issues in doing shrink slab. There're six different reclaim paths by now, - kswapd reclaim path - node reclaim path - hibernate preallocate memory reclaim path - direct reclaim path - memcg reclaim path - memcg softlimit reclaim path The slab caches reclaimed in these paths are only calculated in the above three paths. The issues are detailed explained in patch #2. We should calculate the reclaimed slab caches in every reclaim path. In order to do it, the struct reclaim_state is placed into the struct shrink_control. In node reclaim path, there'is another issue about shrinking slab, which is adressed in "mm/vmscan: shrink slab in node reclaim" (https://lore.kernel.org/linux-mm/1559874946-22960-1-git-send-email-laoar.shao@gmail.com/). This patch (of 2): The struct reclaim_state is used to record how many slab caches are reclaimed in one reclaim path. The struct shrink_control is used to control one reclaim path. So we'd better put reclaim_state into shrink_control. [laoar.shao@gmail.com: remove reclaim_state assignment from __perform_reclaim()] Link: http://lkml.kernel.org/r/1561381582-13697-1-git-send-email-laoar.shao@gmail.com Link: http://lkml.kernel.org/r/1561112086-6169-2-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 766a4c1 | Yafang Shao | 16 July 2019, 23:26:06 UTC | mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones After commit 815744d75152 ("mm: memcontrol: don't batch updates of local VM stats and events"), the local VM counter are not in sync with the hierarchical ones. Below is one example in a leaf memcg on my server (with 8 CPUs): inactive_file 3567570944 total_inactive_file 3568029696 We find that the deviation is very great because the 'val' in __mod_memcg_state() is in pages while the effective value in memcg_stat_show() is in bytes. So the maximum of this deviation between local VM stats and total VM stats can be (32 * number_of_cpu * PAGE_SIZE), that may be an unacceptably great value. We should keep the local VM stats in sync with the total stats. In order to keep this behavior the same across counters, this patch updates __mod_lruvec_state() and __count_memcg_events() as well. Link: http://lkml.kernel.org/r/1562851979-10610-1-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <shaoyafang@didiglobal.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| f1549cb | Henry Burns | 16 July 2019, 23:26:03 UTC | mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc One of the gfp flags used to show that a page is movable is __GFP_HIGHMEM. Currently z3fold_alloc() fails when __GFP_HIGHMEM is passed. Now that z3fold pages are movable, we allow __GFP_HIGHMEM. We strip the movability related flags from the call to kmem_cache_alloc() for our slots since it is a kernel allocation. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190712222118.108192-1-henryburns@google.com Signed-off-by: Henry Burns <henryburns@google.com> Acked-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 929f92f | Ryohei Suzuki | 16 July 2019, 23:26:00 UTC | mm/cma.c: fix a typo ("alloc_cma" -> "cma_alloc") in cma_release() comments A comment referred to a non-existent function alloc_cma(), which should have been cma_alloc(). Link: http://lkml.kernel.org/r/20190712085549.5920-1-ryh.szk.cmnty@gmail.com Signed-off-by: Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| a07057d | Arnd Bergmann | 16 July 2019, 23:25:57 UTC | mm/slab_common.c: work around clang bug #42570 Clang gets rather confused about two variables in the same special section when one of them is not initialized, leading to an assembler warning later: /tmp/slab_common-18f869.s: Assembler messages: /tmp/slab_common-18f869.s:7526: Warning: ignoring changed section attributes for .data..ro_after_init Adding an initialization to kmalloc_caches is rather silly here but does avoid the issue. Link: https://bugs.llvm.org/show_bug.cgi?id=42570 Link: http://lkml.kernel.org/r/20190712090455.266021-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 7b7c1df | Arnd Bergmann | 16 July 2019, 23:25:54 UTC | lib/mpi/longlong.h: fix building with 32-bit x86 The mpi library contains some rather old inline assembly statements that produce a lot of warnings for 32-bit x86, such as: lib/mpi/mpih-div.c:76:16: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions udiv_qrnnd(qp[i], n1, n1, np[i], d); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:423:20: note: expanded from macro 'udiv_qrnnd' : "=a" ((USItype)(q)), \ ~~~~~~~~~~^~ There is no point in doing a type cast for the output of an inline assembler statement, so just remove the cast here, as we have done for other architectures in the past. See also dea632cadd12 ("lib/mpi: fix build with clang"). Link: http://lkml.kernel.org/r/20190712090740.340186-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| e5f2249 | Arnd Bergmann | 16 July 2019, 23:25:51 UTC | mm/shmem.c: fix unused shmem_parse_huge() function warning When CONFIG_SYSFS is disabled but CONFIG_TMPFS is enabled, we get a warning about shmem_parse_huge() never being called: mm/shmem.c:417:12: error: unused function 'shmem_parse_huge' [-Werror,-Wunused-function] static int shmem_parse_huge(const char *str) Change the #ifdef so we no longer build this function in that configuration. Link: http://lkml.kernel.org/r/20190712091141.673355-1-arnd@arndb.de Fixes: 144df3b288c4 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| bb9a374 | Vitaly Wool | 16 July 2019, 23:25:48 UTC | mm/z3fold: don't try to use buddy slots after free As reported by Henry Burns: Running z3fold stress testing with address sanitization showed zhdr->slots was being used after it was freed. z3fold_free(z3fold_pool, handle) free_handle(handle) kmem_cache_free(pool->c_handle, zhdr->slots) release_z3fold_page_locked_list(kref) __release_z3fold_page(zhdr, true) zhdr_to_pool(zhdr) slots_to_pool(zhdr->slots) *BOOM* To fix this, add pointer to the pool back to z3fold_header and modify zhdr_to_pool to return zhdr->pool. Link: http://lkml.kernel.org/r/20190708134808.e89f3bfadd9f6ffd7eff9ba9@gmail.com Fixes: 7c2b8baa61fe ("mm/z3fold.c: add structure for buddy handles") Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reported-by: Henry Burns <henryburns@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 July 2019, 02:23:21 UTC |
| 5095062 | Linus Torvalds | 16 July 2019, 16:25:04 UTC | Merge tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Provide support for ACPI enumeration; gpio_backlight Fix-ups: - SPDX fixups; pwm_bl - Fix linear brightness levels to include number available; pwm_bl" * tag 'backlight-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix heuristic to determine number of brightness levels backlight: gpio_backlight: Enable ACPI enumeration backlight: pwm_bl: Convert to use SPDX identifier | 16 July 2019, 16:25:04 UTC |
| 9637d51 | Linus Torvalds | 16 July 2019, 04:20:52 UTC | Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ... | 16 July 2019, 04:20:52 UTC |
| 273cbf6 | Linus Torvalds | 16 July 2019, 04:10:39 UTC | Merge branch 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ... | 16 July 2019, 04:10:39 UTC |
| 5fe7b60 | Linus Torvalds | 16 July 2019, 04:06:15 UTC | Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client | 16 July 2019, 04:06:15 UTC |
| fb4da21 | Linus Torvalds | 16 July 2019, 03:44:49 UTC | Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ... | 16 July 2019, 03:44:49 UTC |
| 2a3c389 | Linus Torvalds | 16 July 2019, 03:38:15 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ... | 16 July 2019, 03:38:15 UTC |
| 8de2625 | Linus Torvalds | 16 July 2019, 03:18:40 UTC | Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ... | 16 July 2019, 03:18:40 UTC |
| be8454a | Linus Torvalds | 16 July 2019, 02:04:27 UTC | Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ... | 16 July 2019, 02:04:27 UTC |
| 3729fe2 | Dave Airlie | 15 July 2019, 18:07:13 UTC | Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" This reverts commit 031e610a6a21448a63dff7a0416e5e206724caac, reversing changes made to 52d2d44eee8091e740d0d275df1311fb8373c9a9. The mm changes in there we premature and not fully ack or reviewed by core mm folks, I dropped the ball by merging them via this tree, so lets take em all back out. Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 July 2019, 18:07:13 UTC |
| 7e4b4df | Dave Airlie | 15 July 2019, 18:06:29 UTC | Revert "mm: adjust apply_to_pfn_range interface for dropped token." This reverts commit 6dfc43d3a19174faead54575c204aee106225f43. Going to revert the whole vmwwgfx pull. Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 July 2019, 18:06:29 UTC |
| 6dfc43d | Dave Airlie | 15 July 2019, 05:16:20 UTC | mm: adjust apply_to_pfn_range interface for dropped token. mm/pgtable: drop pgtable_t variable from pte_fn_t functions drops the token came in via the hmm tree, this caused lots of conflicts, but applying this cleanup patch should reduce it to something easier to handle. Just accept the token is unused at this point. Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 July 2019, 05:16:20 UTC |
| fec88ab | Linus Torvalds | 15 July 2019, 02:42:11 UTC | Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull HMM updates from Jason Gunthorpe: "Improvements and bug fixes for the hmm interface in the kernel: - Improve clarity, locking and APIs related to the 'hmm mirror' feature merged last cycle. In linux-next we now see AMDGPU and nouveau to be using this API. - Remove old or transitional hmm APIs. These are hold overs from the past with no users, or APIs that existed only to manage cross tree conflicts. There are still a few more of these cleanups that didn't make the merge window cut off. - Improve some core mm APIs: - export alloc_pages_vma() for driver use - refactor into devm_request_free_mem_region() to manage DEVICE_PRIVATE resource reservations - refactor duplicative driver code into the core dev_pagemap struct - Remove hmm wrappers of improved core mm APIs, instead have drivers use the simplified API directly - Remove DEVICE_PUBLIC - Simplify the kconfig flow for the hmm users and core code" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits) mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR mm: remove the HMM config option mm: sort out the DEVICE_PRIVATE Kconfig mess mm: simplify ZONE_DEVICE page private data mm: remove hmm_devmem_add mm: remove hmm_vma_alloc_locked_page nouveau: use devm_memremap_pages directly nouveau: use alloc_page_vma directly PCI/P2PDMA: use the dev_pagemap internal refcount device-dax: use the dev_pagemap internal refcount memremap: provide an optional internal refcount in struct dev_pagemap memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag memremap: remove the data field in struct dev_pagemap memremap: add a migrate_to_ram method to struct dev_pagemap_ops memremap: lift the devmap_enable manipulation into devm_memremap_pages memremap: pass a struct dev_pagemap to ->kill and ->cleanup memremap: move dev_pagemap callbacks into a separate structure memremap: validate the pagemap type passed to devm_memremap_pages mm: factor out a devm_request_free_mem_region helper mm: export alloc_pages_vma ... | 15 July 2019, 02:42:11 UTC |
| fa6e951 | Linus Torvalds | 15 July 2019, 02:29:04 UTC | Merge tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs updates from Tyler Hicks: - Fix error handling when ecryptfs_read_lower() encounters an error - Fix read-only file creation when the eCryptfs mount is configured to store metadata in xattrs - Minor code cleanups * tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: Change return type of ecryptfs_process_flags ecryptfs: Make ecryptfs_xattr_handler static ecryptfs: remove unnessesary null check in ecryptfs_keyring_auth_tok_for_sig ecryptfs: use print_hex_dump_bytes for hexdump eCryptfs: fix permission denied with ecryptfs_xattr mount option when create readonly file ecryptfs: re-order a condition for static checkers eCryptfs: fix a couple type promotion bugs | 15 July 2019, 02:29:04 UTC |
| a318423 | Linus Torvalds | 15 July 2019, 00:24:12 UTC | Merge tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBIFS updates from Richard Weinberger: - Support for zstd compression - Support for offline signed filesystems - Various fixes for regressions * tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Don't leak orphans on memory during commit ubifs: Check link count of inodes when killing orphans. ubifs: Add support for zstd compression. ubifs: support offline signed images ubifs: remove unnecessary check in ubifs_log_start_commit ubifs: Fix typo of output in get_cs_sqnum ubifs: Simplify redundant code ubifs: Correctly use tnc_next() in search_dh_cookie() | 15 July 2019, 00:24:12 UTC |
| f2772a0 | Linus Torvalds | 15 July 2019, 00:17:34 UTC | Merge tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - A new timer mode, time travel, for testing with UML - Many bugixes/improvements for the serial line driver - Various bugfixes * tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT um: Fix kcov crash during startup um: configs: Remove useless UEVENT_HELPER_PATH um: Support time travel mode um: Pass nsecs to os timer functions um: Remove drivers/ssl.h um: Don't garbage collect in deactivate_all_fds() um: Silence lockdep complaint about mmap_sem um: Remove locking in deactivate_all_fds() um: Timer code cleanup um: fix os_timer_one_shot() um: Fix IRQ controller regression on console read | 15 July 2019, 00:17:34 UTC |
| fcd9814 | Linus Torvalds | 15 July 2019, 00:08:08 UTC | Merge tag 'stream_open-5.3' of https://lab.nexedi.com/kirr/linux Pull stream_open() updates from Kirill Smelkov: "This time on stream_open front it is only two small changes: - the first one converts stream_open.cocci to treat all functions that start with wait_.* as blocking. Previously it was only wait_event_.* functions that were considered as blocking, but this was falsely reporting several deadlock cases as only warning. This was picked by linux-kbuild and entered mainline as commit 0c4ab18fc33b ("coccinelle: api/stream_open: treat all wait_.*() calls as blocking"), and already merged earlier. - the second one teaches stream_open.cocci to consider files as being stream-like even if they use noop_llseek. It results in two more drivers being converted to stream_open() (mousedev.c and hid-sensor-custom.c)" * tag 'stream_open-5.3' of https://lab.nexedi.com/kirr/linux: *: convert stream-like files -> stream_open, even if they use noop_llseek | 15 July 2019, 00:08:08 UTC |
| 5516745 | Linus Torvalds | 14 July 2019, 23:51:47 UTC | Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: "Gathered a bunch of x86 platform driver changes. It's rather big, since includes two big refactors and completely new driver: - ASUS WMI driver got a big refactoring in order to support the TUF Gaming laptops. Besides that, the regression with backlight being permanently off on various EeePC laptops has been fixed. - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to X axis being inverted. This has been fixed. - Intel PMC core driver has been extended to be ACPI enumerated if the DSDT provides device with _HID "INT33A1". This allows to convert the driver to be pure platform and support new hardware purely based on ACPI DSDT. - From now on the Intel Speed Select Technology is supported thru a corresponding driver. This driver provides an access to the features of the ISST, such as Performance Profile, Core Power, Base frequency and Turbo Frequency. - Mellanox platform drivers has been refactored and now extended to support more systems, including new coming ones. - The OLPC XO-1.75 platform is now supported. - CB4063 Beckhoff Automation board is using PMC clocks, provided via pmc_atom driver, for ethernet controllers in a way that they can't be managed by the clock driver. The quirk has been extended to cover this case. - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile the information of Chuwi Hi10 Air has been fixed to cover more models based on the same platform. - Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it has been provided. It required some extension of the generic WMI library, which allows to propagate opaque context to the ->probe() of the individual drivers. This release includes debugfs clean up from Greg KH for several drivers that drop return code check and make debugfs absence or failure non-fatal. Also miscellaneous fixes here and there, mostly for Acer WMI and various Intel drivers" * tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits) platform/x86: Fix PCENGINES_APU2 Kconfig warning tools/power/x86/intel-speed-select: Add .gitignore file platform/x86: mlx-platform: Fix error handling in mlxplat_init() platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1" platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds platform/x86: asus-wmi: Use dev_get_drvdata() Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Add more reset cause attributes platform/x86: mlx-platform: Modify DMI matching order platform/x86: mlx-platform: Add regmap structure for the next generation systems platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation platform/x86: mlx-platform: Move regmap initialization before all drivers activation MAINTAINERS: Update for Intel Speed Select Technology tools/power/x86: A tool to validate Intel Speed Select commands platform/x86: ISST: Restore state on resume platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI platform/x86: ISST: Add Intel Speed Select mmio interface platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number ... | 14 July 2019, 23:51:47 UTC |
| fde7dc6 | Linus Torvalds | 14 July 2019, 23:36:51 UTC | Merge tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - stm32: race fix by adding a spinlock - mhu: trim included headers - omap: add support for K3 SoCs - imx: Irq disable fix - bcm: tidy up extracting driver data - tegra: make resume 'noirq' - api: fix error handling * tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: handle failed named mailbox channel request mailbox: tegra: avoid resume NULL mailboxes mailbox: tegra: hsp: add noirq resume mailbox: bcm-flexrm-mailbox: using dev_get_drvdata directly mailbox: imx: Clear GIEn bit at shutdown mailbox: omap: Add support for TI K3 SoCs dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs mailbox: arm_mhu: reorder header inclusion and drop unneeded ones mailbox: stm32_ipcc: add spinlock to fix channels concurrent access | 14 July 2019, 23:36:51 UTC |
| a1240cf | Linus Torvalds | 14 July 2019, 23:17:18 UTC | Merge branch 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu updates from Dennis Zhou: "This includes changes to let percpu_ref release the backing percpu memory earlier after it has been switched to atomic in cases where the percpu ref is not revived. This will help recycle percpu memory earlier in cases where the refcounts are pinned for prolonged periods of time" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu_ref: release percpu memory early without PERCPU_REF_ALLOW_REINIT md: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT io_uring: initialize percpu refcounters using PERCU_REF_ALLOW_REINIT percpu_ref: introduce PERCPU_REF_ALLOW_REINIT flag | 14 July 2019, 23:17:18 UTC |
| 1d03985 | Linus Torvalds | 14 July 2019, 18:40:33 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A number of PMU driver corner case fixes, a race fix, an event grouping fix, plus a bunch of tooling fixes/updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) perf/x86/intel: Fix spurious NMI on fixed counter perf/core: Fix exclusive events' grouping perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs perf/x86/amd/uncore: Do not set 'ThreadMask' and 'SliceMask' for non-L3 PMCs perf/core: Fix race between close() and fork() perf intel-pt: Fix potential NULL pointer dereference found by the smatch tool perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool perf script: Assume native_arch for pipe mode perf scripts python: export-to-sqlite.py: Fix DROP VIEW power_events_view perf scripts python: export-to-postgresql.py: Fix DROP VIEW power_events_view perf hists browser: Fix potential NULL pointer dereference found by the smatch tool perf cs-etm: Fix potential NULL pointer dereference found by the smatch tool perf parse-events: Remove unused variable: error perf parse-events: Remove unused variable 'i' perf metricgroup: Add missing list_del_init() when flushing egroups list perf tools: Use list_del_init() more thorougly perf tools: Use zfree() where applicable tools lib: Adopt zalloc()/zfree() from tools/perf perf tools: Move get_current_dir_name() cond prototype out of util.h perf namespaces: Move the conditional setns() prototype to namespaces.h ... | 14 July 2019, 18:40:33 UTC |
| 0c85ce1 | Linus Torvalds | 14 July 2019, 18:39:21 UTC | Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "A single fix for a locking statistics bug" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix lock used or unused stats error | 14 July 2019, 18:39:21 UTC |
| 577d946 | Linus Torvalds | 14 July 2019, 18:36:44 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "A single build system bugfix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix flip/flop vdso build bug | 14 July 2019, 18:36:44 UTC |
| 50ec188 | Linus Torvalds | 14 July 2019, 18:34:05 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a sched statistics related bug that would trigger a kernel warning on certain configs" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix preempt warning in ttwu | 14 July 2019, 18:34:05 UTC |
| 3975b09 | Kirill Smelkov | 19 June 2019, 17:26:56 UTC | *: convert stream-like files -> stream_open, even if they use noop_llseek This patch continues 10dce8af3422 (fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock) and c5bf68fe0c86 (*: convert stream-like files from nonseekable_open -> stream_open) and teaches steam_open.cocci to consider files as being stream-like not only if they have .llseek=no_llseek, but also if they have .llseek=noop_llseek. This is safe to do: the comment about noop_llseek says This is an implementation of ->llseek useable for the rare special case when userspace expects the seek to succeed but the (device) file is actually not able to perform the seek. In this case you use noop_llseek() instead of falling back to the default implementation of ->llseek. and in general noop_llseek was massively added to drivers in 6038f373a3dc (llseek: automatically add .llseek fop) when changing default for NULL .llseek from NOP to no_llseek with the idea to avoid breaking compatibility, if maybe some user-space program was using lseek on a device without caring about the result, but caring if it was an error or not. Amended semantic patch produces two changes when applied tree-wide: drivers/hid/hid-sensor-custom.c:690:8-24: WARNING: hid_sensor_custom_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/mousedev.c:564:1-17: ERROR: mousedev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jan Blunck <jblunck@suse.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> | 14 July 2019, 13:09:19 UTC |
| 192f0f8 | Linus Torvalds | 13 July 2019, 23:08:36 UTC | Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ... | 13 July 2019, 23:08:36 UTC |
| ec92497 | Linus Torvalds | 13 July 2019, 23:04:19 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc updates from David Miller: "Just a few small changes: - Fix console naming inconsistency with hypervisor consoles, from John Paul Adrian Glaubitz - Fix userland compilation due to use of u_int, from Masahiro Yamada" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Add missing newline at end of file sparc: fix unknown type name u_int in uapi header sparc: configs: Remove useless UEVENT_HELPER_PATH sparc: Remove redundant copy of the LGPL-2.0 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg | 13 July 2019, 23:04:19 UTC |
| d121092 | Linus Torvalds | 13 July 2019, 22:57:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann. 2) Missing skb queue lock init in tipc, from Chris Packham. 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet. 4) Elide flow dissection of local packets in FIB rules, from Petar Penkov. 5) Fix TLS support build failure in mlx5, from Tariq Toukab. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ppp: mppe: Revert "ppp: mppe: Add softdep to arc4" net: dsa: qca8k: replace legacy gpio include net: hisilicon: Use devm_platform_ioremap_resource cxgb4: reduce kernel stack usage in cudbg_collect_mem_region() tipc: ensure head->lock is initialised tc-tests: updated skbedit tests nfp: flower: ensure ip protocol is specified for L4 matches nfp: flower: fix ethernet check on match fields net/mlx5e: Provide cb_list pointer when setting up tc block on rep net: phy: make exported variables non-static net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd() davinci_cpdma: don't cast dma_addr_t to pointer net: openvswitch: do not update max_headroom if new headroom is equal to old headroom net/mlx5e: Convert single case statement switch statements into if statements net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off net/mlx5e: Fix compilation error in TLS code ipv6: fix static key imbalance in fl_create() ipv6: fix potential crash in ip6_datagram_dst_update() ipv6: tcp: fix flowlabels reflection for RST packets ... | 13 July 2019, 22:57:37 UTC |
| 1fa9185 | Linus Torvalds | 13 July 2019, 22:51:06 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide Pull IDE update from David Miller: "Small cleanup" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: use BIT() macro for defining bit-flags | 13 July 2019, 22:51:06 UTC |
| 3f06962 | Linus Torvalds | 13 July 2019, 22:42:44 UTC | Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ... | 13 July 2019, 22:42:44 UTC |
| 2260840 | Linus Torvalds | 13 July 2019, 22:24:31 UTC | Merge tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add encrypted byte-offset initialization vector (eboiv) to DM crypt. - Add optional discard features to DM snapshot which allow freeing space from a DM device whose free space was exhausted. - Various small improvements to use struct_size() and kzalloc(). - Fix to check if DM thin metadata is in fail_io mode before attempting to update the superblock to set the needs_check flag. Otherwise the DM thin-pool can hang. - Fix DM bufio shrinker's potential for ABBA recursion deadlock with DM thin provisioning on loop usecase. * tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix deadlock with loop device dm snapshot: add optional discard support features dm crypt: implement eboiv - encrypted byte-offset initialization vector dm crypt: remove obsolete comment about plumb IV dm crypt: wipe private IV struct after key invalid flag is set dm integrity: use kzalloc() instead of kmalloc() + memset() dm: update stale comment in end_clone_bio() dm log writes: fix incorrect comment about the logged sequence example dm log writes: use struct_size() to calculate size of pending_block dm crypt: use struct_size() when allocating encryption context dm integrity: always set version on superblock update dm thin metadata: check if in fail_io mode when setting needs_check | 13 July 2019, 22:24:31 UTC |
| 92adeb6 | Linus Torvalds | 13 July 2019, 22:07:02 UTC | Merge tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Some small fixes for various things, nothing huge, mostly found by automated tools. Plus add a driver that allows Linux to act as an IPMB slave device, so it can be a satellite MC in an IPMI network" * tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi: docs: ipmb: place it at driver-api and convert to ReST fix platform_no_drv_owner.cocci warnings ipmi: ipmb: don't allocate i2c_client on stack ipmi: ipmb: Fix build error while CONFIG_I2C is set to m Add support for IPMB driver drivers: ipmi: Drop device reference ipmi_ssif: fix unexpected driver unregister warning ipmi_si: use bool type for initialized variable ipmi_si: fix unexpected driver unregister warning | 13 July 2019, 22:07:02 UTC |
