298647e | Linus Torvalds | 20 December 2014, 02:15:12 UTC | Merge tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Fixes for filename decryption and encrypted view plus a cleanup - The filename decryption routines were, at times, writing a zero byte one character past the end of the filename buffer - The encrypted view feature attempted, and failed, to roll its own form of enforcing a read-only mount instead of letting the VFS enforce it" * tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Remove buggy and unnecessary write in file name decode routine eCryptfs: Remove unnecessary casts when parsing packet lengths eCryptfs: Force RO mount when encrypted view is enabled | 20 December 2014, 02:15:12 UTC |
5c68eac | Linus Torvalds | 20 December 2014, 02:10:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This is part two of our merge window patches. These are all from Filipe, and fix some really hard to find races that can cause corruptions. Most of them involved block group removal (balance) or discard" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove non-sense btrfs_error_discard_extent() function Btrfs: fix fs corruption on transaction abort if device supports discard Btrfs: always clear a block group node when removing it from the tree Btrfs: ensure deletion from pinned_chunks list is protected | 20 December 2014, 02:10:42 UTC |
20e471f | Linus Torvalds | 20 December 2014, 02:07:17 UTC | Merge tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few fixes that have landed after the previous pull request. All are driver specific fixes including: - error/int value fixes in OXFW, - Intel Skylake HD-audio HDMI codec support, - Additional HD-audio Realtek codecs and AD1986A codec fixes/quirks, - a few more DSD support and a quirk for Arcam rPAC in usb-audio, - a typo fix for Scarlett 6i6, - fixes for new ASIHPI firmware, - ASoC Exynos7 cleanups, - Intel ACPI support, and - a fix for PCM512 register cache sync" * tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC ALSA: hda/realtek - New codec support for ALC298 ALSA: asihpi: update to HPI version 4.14 ALSA: asihpi: increase tuner pad cache size ALSA: asihpi: relax firmware version check ALSA: usb-audio: Fix Scarlett 6i6 initialization typo ALSA: hda - Add quirk for Packard Bell EasyNote MX65 ALSA: usb-audio: add native DSD support for Matrix Audio DACs ALSA: hda/realtek - New codec support for ALC256 ALSA: hda/realtek - Add new Dell desktop for ALC3234 headset mode ASoC: Intel: fix possible acpi enumeration panic ALSA: hda/hdmi - apply Haswell fix-ups to Skylake display codec ASoC: Intel: fix return value check in sst_acpi_probe() ALSA: hda - Make add_stereo_mix_input flag tristate ALSA: hda - Create capture source ctls when stereo mix input is added ALSA: hda - Fix typos in snd_hda_get_int_hint() kerneldoc comments ALSA: hda - add codec ID for Skylake display audio codec ALSA: oxfw: some signedness bugs ALSA: oxfw: fix detect_loud_models() return value ASoC: rt5677: add REGMAP_I2C and REGMAP_IRQ dependency ... | 20 December 2014, 02:07:17 UTC |
ed55635 | Linus Torvalds | 20 December 2014, 02:02:22 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "The highlights this merge window include: - Allow target fabric drivers to function as built-in. (Roland) - Fix tcm_loop multi-TPG endpoint nexus bug. (Hannes) - Move per device config_item_type into se_subsystem_api, allowing configfs attributes to be defined at module_init time. (Jerome + nab) - Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use external configfs attributes. (nab) - A number of iser-target fixes related to active session + network portal shutdown stability during extended stress testing. (Sagi + Slava) - Dynamic allocation of T10-PI contexts for iser-target, fixing a potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14 code. (Sagi) - iser-target performance + scalability improvements. (Sagi) - Fixes for SPC-4 Persistent Reservation AllRegistrants spec compliance. (Ilias + James + nab) - Avoid potential short kern_sendmsg() in iscsi-target for now until Al's conversion to use msghdr iteration is merged post -rc1. (Viro) Also, Sagi has requested a number of iser-target patches (9) that address stability issues he's encountered during extended stress testing be considered for v3.10.y + v3.14.y code. Given the amount of LOC involved, it will certainly require extra backporting effort. Apologies in advance to Greg-KH & Co on this. Sagi and I will be working post-merge to ensure they each get applied correctly" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits) target: Allow AllRegistrants to re-RESERVE existing reservation uapi/linux/target_core_user.h: fix headers_install.sh badness iscsi-target: Fail connection on short sendmsg writes iscsi-target: nullify session in failed login sequence target: Avoid dropping AllRegistrants reservation during unregister target: Fix R_HOLDER bit usage for AllRegistrants iscsi-target: Drop left-over bogus iscsi_np->tpg_np iser-target: Fix wc->wr_id cast warning iser-target: Remove code duplication iser-target: Adjust log levels and prettify some prints iser-target: Use debug_level parameter to control logging level iser-target: Fix logout sequence iser-target: Don't wait for session commands from completion context iser-target: Reduce CQ lock contention by batch polling iser-target: Introduce isert_poll_budget iser-target: Remove an atomic operation from the IO path iser-target: Remove redundant call to isert_conn_terminate iser-target: Use single CQ for TX and RX iser-target: Centralize completion elements to a context iser-target: Cast wr_id with uintptr_t instead of unsinged long ... | 20 December 2014, 02:02:22 UTC |
5be95b7 | Linus Torvalds | 20 December 2014, 01:57:51 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel Pull arch/hexagon updates from Richard Kuo: "Build cleanup and a few misc fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Hexagon: fix signal delivery for debug traps Hexagon: set ARCH_DMA_MINALIGN Hexagon: fix alignment of init_task in RW_DATA_SECTION hexagon: Fix build failures in linux-next | 20 December 2014, 01:57:51 UTC |
971d9e0 | Linus Torvalds | 20 December 2014, 01:08:14 UTC | Merge tag 'cris-changes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull arch/chris updates from Jesper Nilsson: "Mostly cleanup and build fixes for CRISv32 allmodconfig God Jul och Gott Nytt år!" * tag 'cris-changes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: CRISv32: Remove last remnants of ETRAX_SPI_MMC_BOARD CRISv32: ETRAXFS: Fix recursive spinlock CRISv32: Select MTDRAM for axisflashmap CRISv32: Implement early console CRIS: Use KALLSYMs if available in call stack dump CRISv32: Fix declaration mismatch CRISv32: Rewrite of synchronous serial port driver CRIS: Update init memory handling CRISv32: Better handling of watchdog bite CRIS: Export missing function symbols CRIS: Export ioremap_nocache CRIS: Fix headers_install CRISv32: Add missing include for mm.h CRISv32: Drop obsolete file for SPI driver | 20 December 2014, 01:08:14 UTC |
acab1f8 | Linus Torvalds | 20 December 2014, 01:07:27 UTC | Merge tag 'please-pull-misc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 __get_cpu_var removal from Tony Luck: "__get_cpu_var removed from rest of tree, drop reference from comments in arch/ia64" * tag 'please-pull-misc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Update comment that references __get_cpu_var | 20 December 2014, 01:07:27 UTC |
8bcabff | Jesper Nilsson | 29 October 2014, 09:15:35 UTC | CRISv32: Remove last remnants of ETRAX_SPI_MMC_BOARD There are no users of this symbol left. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:06:13 UTC |
a3199ad | Jesper Nilsson | 27 October 2014, 08:11:31 UTC | CRISv32: ETRAXFS: Fix recursive spinlock Move pinmux alloc/dealloc code into functions that don't take the spinlock so we can use from code that has the spinlock already. CRISv32 has no working SMP, so spinlocks becomes a NOP, so deadlock was never seen. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:06:04 UTC |
9f1ad51 | Jesper Nilsson | 27 October 2014, 08:09:14 UTC | CRISv32: Select MTDRAM for axisflashmap Fixes compile error on allmodconfig. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:56 UTC |
4729d77 | Jesper Nilsson | 08 October 2014, 13:52:49 UTC | CRISv32: Implement early console Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:49 UTC |
421d085 | Jesper Nilsson | 08 October 2014, 12:57:35 UTC | CRIS: Use KALLSYMs if available in call stack dump Also, print kernel version on oops. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:36 UTC |
ca36c1f | Jesper Nilsson | 07 October 2014, 11:42:35 UTC | CRISv32: Fix declaration mismatch Drop i2c_init from this header, it was declared non-static here, but static in the C-file. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:21 UTC |
3f10462 | Jesper Nilsson | 07 October 2014, 11:40:08 UTC | CRISv32: Rewrite of synchronous serial port driver Make driver possible to load as a module and try to handle locking better. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:04 UTC |
80d6170 | Jesper Nilsson | 07 October 2014, 11:03:17 UTC | CRIS: Update init memory handling - Add free_initrd_mem as found by Guenter Roeck <linux@roeck-us.net> - Add free_init_pages - Export empty_zero_page symbol Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:04:52 UTC |
d6517c4 | Jesper Nilsson | 07 October 2014, 10:59:24 UTC | CRISv32: Better handling of watchdog bite Don't enter watchdog handling if we're already in watchdog handling. Also some minor formatting tweaks. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:04:39 UTC |
dbd3c7e | Jesper Nilsson | 07 October 2014, 10:20:47 UTC | CRIS: Export missing function symbols strcmp was lost when all other string functions were removed, but we still have an optimized version for this on CRISv32, so any driver built as a module would not have access to this symbol. In a similar manner, we had optimized versions of csum_partial_copy_from_user and __do_clear_user but no exported symbols for them, breaking bunch of other drivers when built as a module. At the same time, move EXPORT_SYMBOL(__copy_user) and EXPORT_SYMBOL(__copy_user_zeroing) C-files so it's located together with the function definition. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:03:22 UTC |
82e6df1 | Jesper Nilsson | 01 October 2014, 13:38:38 UTC | CRIS: Export ioremap_nocache Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:01:23 UTC |
6eb64b8 | Sam Ravnborg | 14 July 2014, 15:08:29 UTC | CRIS: Fix headers_install Fix headers_install by adjusting the path to arch files. And delete unused Kbuild file. Drop special handling of cris in the headers.sh script as a nice side-effect. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:01:12 UTC |
eeda008 | Jesper Nilsson | 30 September 2014, 13:34:10 UTC | CRISv32: Add missing include for mm.h Fixes the following compile error. arch/cris/arch-v32/kernel/time.c: In function 'reset_watchdog': arch/cris/arch-v32/kernel/time.c:121:2: error: implicit declaration of function 'global_page_state' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:00:57 UTC |
f89412a | Jesper Nilsson | 30 September 2014, 13:31:16 UTC | CRISv32: Drop obsolete file for SPI driver File was already deleted. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 22:59:37 UTC |
e589c9e | Linus Torvalds | 19 December 2014, 22:02:02 UTC | Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ... | 19 December 2014, 22:02:02 UTC |
4bb9374 | Linus Torvalds | 19 December 2014, 21:29:20 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NOHZ update from Thomas Gleixner: "Remove the call into the nohz idle code from the fake 'idle' thread in the powerclamp driver along with the export of those functions which was smuggeled in via the thermal tree. People have tried to hack around it in the nohz core code, but it just violates all rightful assumptions of that code about the only valid calling context (i.e. the proper idle task). The powerclamp trainwreck will still work, it just wont get the benefit of long idle sleeps" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/powerclamp: Remove tick_nohz_idle abuse | 19 December 2014, 21:29:20 UTC |
ac88ee3 | Linus Torvalds | 19 December 2014, 21:26:08 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core fix from Thomas Gleixner: "A single fix plugging a long standing race between proc/stat and proc/interrupts access and freeing of interrupt descriptors" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent proc race against freeing of irq descriptors | 19 December 2014, 21:26:08 UTC |
a544557 | Linus Torvalds | 19 December 2014, 21:22:42 UTC | Merge branch 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MPX fixes from Thomas Gleixner: "Three updates for the new MPX infrastructure: - Use the proper error check in the trap handler - Add a proper config option for it - Bring documentation up to date" * 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mpx: Give MPX a real config option prompt x86, mpx: Update documentation x86_64/traps: Fix always true condition | 19 December 2014, 21:22:42 UTC |
1092b59 | Linus Torvalds | 19 December 2014, 21:18:31 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This contains a single TLS ABI validation fix from Andy Lutomirski" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tls: Don't validate lm in set_thread_area() after all | 19 December 2014, 21:18:31 UTC |
88a5766 | Linus Torvalds | 19 December 2014, 21:15:24 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes and cleanups from Ingo Molnar: "A kernel fix plus mostly tooling fixes, but also some tooling restructuring and cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) perf: Fix building warning on ARM 32 perf symbols: Fix use after free in filename__read_build_id perf evlist: Use roundup_pow_of_two tools: Adopt roundup_pow_of_two perf tools: Make the mmap length autotuning more robust tools: Adopt rounddown_pow_of_two and deps tools: Adopt fls_long and deps tools: Move bitops.h from tools/perf/util to tools/ tools: Introduce asm-generic/bitops.h tools lib: Move asm-generic/bitops/find.h code to tools/include and tools/lib tools: Whitespace prep patches for moving bitops.h tools: Move code originally from asm-generic/atomic.h into tools/include/asm-generic/ tools: Move code originally from linux/log2.h to tools/include/linux/ tools: Move __ffs implementation to tools/include/asm-generic/bitops/__ffs.h perf evlist: Do not use hard coded value for a mmap_pages default perf trace: Let the perf_evlist__mmap autosize the number of pages to use perf evlist: Improve the strerror_mmap method perf evlist: Clarify sterror_mmap variable names perf evlist: Fixup brown paper bag on "hint" for --mmap-pages cmdline arg perf trace: Provide a better explanation when mmap fails ... | 19 December 2014, 21:15:24 UTC |
34b85e3 | Linus Torvalds | 19 December 2014, 20:57:45 UTC | Merge tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull second batch of powerpc updates from Michael Ellerman: "The highlight is the series that reworks the idle management on powernv, which allows us to use deeper idle states on those machines. There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem. An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we take it through the powerpc tree. A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit maintainers. A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file, so that tools can use it. Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and the patch to add __force to get_user() so we can use bitwise types" * tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Ignore smt-enabled on Power8 and later powerpc/uaccess: Allow get_user() with bitwise types powerpc/powernv: Expose OPAL firmware symbol map powernv/powerpc: Add winkle support for offline cpus powernv/cpuidle: Redesign idle states management powerpc/powernv: Enable Offline CPUs to enter deep idle states powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode i2c: Driver to expose PowerNV platform i2c busses powerpc: add little endian flag to syscall_get_arch() power/perf/hv-24x7: Use kmem_cache_free() instead of kfree powerpc/perf/hv-24x7: Use per-cpu page buffer cxl: Unmap MMIO regions when detaching a context cxl: Add timeout to process element commands cxl: Change contexts_lock to a mutex to fix sleep while atomic bug powerpc: Secondary CPUs must set cpu_callin_map after setting active and online | 19 December 2014, 20:57:45 UTC |
d5e80b4 | Dave Jones | 19 December 2014, 16:20:43 UTC | Update/Remove soon-to-be-dead email address I'm leaving Red Hat at the end of December 2014, so remove all references to my soon-to-be-dead address. (There are some references left in the tree, that need additional changes, I'll send those through the AGP maintainers). Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 20:56:15 UTC |
a5fd973 | Thomas Gleixner | 18 December 2014, 10:51:01 UTC | tick/powerclamp: Remove tick_nohz_idle abuse commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module use" was merged via the thermal tree without an explicit ack from the relevant maintainers. The exports are abused by the intel powerclamp driver which implements a fake idle state from a sched FIFO task. This causes all kinds of wreckage in the NOHZ core code which rightfully assumes that tick_nohz_idle_enter/exit() are only called from the idle task itself. Recent changes in the NOHZ core lead to a failure of the powerclamp driver and now people try to hack completely broken and backwards workarounds into the NOHZ core code. This is completely unacceptable and just papers over the real problem. There are way more subtle issues lurking around the corner. The real solution is to fix the powerclamp driver by rewriting it with a sane concept, but that's beyond the scope of this. So the only solution for now is to remove the calls into the core NOHZ code from the powerclamp trainwreck along with the exports. Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver" Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Pan Jacob jun <jacob.jun.pan@intel.com> Cc: LKP <lkp@01.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2014, 13:05:52 UTC |
ac931f8 | Wang Nan | 16 December 2014, 06:19:06 UTC | perf: Fix building warning on ARM 32 Commit 85c116a6cb91 ("perf callchain: Make get_srcline fall back to sym+offset") introduces asprintf() call and matches '%ld' to a u64 argument, which is incorrect on ARM: CC /home/wn/util/srcline.o util/srcline.c: In function 'get_srcline': util/srcline.c:297:6: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'u64' [-Werror=format] cc1: all warnings being treated as errors make[1]: *** [/home/wn/util/srcline.o] Error 1 In addition, all users of get_srcline() use u64 addr, and libbfd also use 64 bit bfd_vma as address. This patch also fix prototype of get_srcline() and addr2line() to use u64 addr instead of unsigned long. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: <lizefan@huawei.com> Cc: <a.p.zijlstra@chello.nl> Cc: <paulus@samba.org> Cc: <acme@kernel.org> Cc: <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1418710746-35943-1-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 19 December 2014, 12:09:43 UTC |
d790be3 | Linus Torvalds | 19 December 2014, 04:55:41 UTC | Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The exciting thing here is the getting rid of stop_machine on module removal. This is possible by using a simple atomic_t for the counter, rather than our fancy per-cpu counter: it turns out that no one is doing a module increment per net packet, so the slowdown should be in the noise" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: param: do not set store func without write perm params: cleanup sysfs allocation kernel:module Fix coding style errors and warnings. module: Remove stop_machine from module unloading module: Replace module_ref with atomic_t refcnt lib/bug: Use RCU list ops for module_bug_list module: Unlink module with RCU synchronizing instead of stop_machine module: Wait for RCU synchronizing before releasing a module | 19 December 2014, 04:55:41 UTC |
64ec45b | Linus Torvalds | 19 December 2014, 04:50:30 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael S Tsirkin: "virtio 1.0 related fixes Most importantly, this fixes using virtio_pci as a module. Further, the big virtio 1.0 conversion missed a couple of places. This fixes them up. This isn't 100% sparse-clean yet because on many architectures get_user triggers sparse warnings when used with __bitwise tag (when same tag is on both pointer and value read). I posted a patchset to fix it up by adding __force on all arches that don't already have it (many do), when that's merged these warnings will go away" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: restore module attributes mic/host: fix up virtio 1.0 APIs vringh: update for virtio 1.0 APIs vringh: 64 bit features tools/virtio: add virtio 1.0 in vringh_test tools/virtio: add virtio 1.0 in virtio_test tools/virtio: enable -Werror tools/virtio: 64 bit features tools/virtio: fix vringh test tools/virtio: more stubs virtio: core support for config generation virtio_pci: add VIRTIO_PCI_NO_LEGACY virtio_pci: move probe to common file virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY virtio_config: fix virtio_cread_bytes virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore | 19 December 2014, 04:50:30 UTC |
c0f486f | Linus Torvalds | 19 December 2014, 04:28:33 UTC | Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ... | 19 December 2014, 04:28:33 UTC |
385336e | Linus Torvalds | 19 December 2014, 04:24:55 UTC | Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: - thinkpad-acpi: Switch to software mute, cleanups - acerhdf: Bang-bang thermal governor, new models, cleanups - dell-laptop: New keyboard backlight support and documentation - toshiba_acpi: Keyboard backlight updates, hotkey handling - dell-wmi: Keypress filtering, WMI event processing - eeepc-laptop: Multiple cleanups, improved error handling, documentation - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails - misc: Code cleanups, quirks, various new IDs * tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits) platform/x86/acerhdf: Still depends on THERMAL Documentation: Add entry for dell-laptop sysfs interface acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control acerhdf: minor clean up acerhdf: added critical trip point acerhdf: Use bang-bang thermal governor acerhdf: Adding support for new models acerhdf: Adding support for "manual mode" dell-smo8800: Add more ACPI ids and change description of driver platform: x86: dell-laptop: Add support for keyboard backlight toshiba_acpi: Add keyboard backlight mode change event toshiba_acpi: Change notify funtion to handle more events toshiba_acpi: Move hotkey enabling code to its own function dell-wmi: Don't report keypresses on keybord illumination change dell-wmi: Don't report keypresses for radio state changes hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails toshiba-acpi: Add missing ID (TOS6207) Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put" platform: x86: Deletion of checks before backlight_device_unregister() ... | 19 December 2014, 04:24:55 UTC |
ebcffcd | Linus Torvalds | 19 December 2014, 04:21:32 UTC | Merge git://www.linux-watchdog.org/linux-watchdog Pull small watchdog update from Wim Van Sebroeck: - fix the argument of watchdog_active() in imx2_wdt - Add power management support to the imx2_wdt watchdog. * git://www.linux-watchdog.org/linux-watchdog: watchdog: imx2_wdt: Fix the argument of watchdog_active() watchdog: imx2_wdt: Add power management support. | 19 December 2014, 04:21:32 UTC |
0ec28c3 | Linus Torvalds | 19 December 2014, 04:14:49 UTC | Merge tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: - Move drivers for really old legacy hardware to staging. Those are using obsolete media kAPIs and are for hardware that nobody uses for years. Simply not worth porting them to the new kAPIs. Of course, if anyone pops up to fix, we can move them back from there - While not too late, do some API fixups at the new colorspace API, added for v3.19 - Some improvements for rcar_vin driver - Some fixups at cx88 and vivid drivers - Some Documentation fixups * tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal [media] tlg2300: move to staging in preparation for removal [media] vino/saa7191: move to staging in preparation for removal [media] MAINTAINERS: vivi -> vivid [media] cx88: remove leftover start_video_dma() call [media] cx88: add missing alloc_ctx support [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps [media] vivid: fix CROP_BOUNDS typo for video output [media] DocBook media: update version number and document changes [media] vivid.txt: document new controls [media] DocBook media: add missing ycbcr_enc and quantization fields [media] v4l2-mediabus.h: use two __u16 instead of two __u32 [media] rcar_vin: Fix interrupt enable in progressive [media] rcar_vin: Enable VSYNC field toggle mode [media] rcar_vin: Add scaling support [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs [media] rcar_vin: Add YUYV capture format support | 19 December 2014, 04:14:49 UTC |
4c929fe | Linus Torvalds | 19 December 2014, 04:10:44 UTC | Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.19: - On-demand paging support in core midlayer and mlx5 driver. This lets userspace create non-pinned memory regions and have the adapter HW trigger page faults. - iSER and IPoIB updates and fixes. - Low-level HW driver updates for cxgb4, mlx4 and ocrdma. - Other miscellaneous fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits) IB/mlx5: Implement on demand paging by adding support for MMU notifiers IB/mlx5: Add support for RDMA read/write responder page faults IB/mlx5: Handle page faults IB/mlx5: Page faults handling infrastructure IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation IB/mlx5: Changes in memory region creation to support on-demand paging IB/mlx5: Implement the ODP capability query verb mlx5_core: Add support for page faults events and low level handling mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag IB/srp: Allow newline separator for connection string IB/core: Implement support for MMU notifiers regarding on demand paging regions IB/core: Add support for on demand paging regions IB/core: Add flags for on demand paging support IB/core: Add support for extended query device caps IB/mlx5: Add function to read WQE from user-space IB/core: Add umem function to read data from user-space IB/core: Replace ib_umem's offset field with a full address IB/mlx5: Enhance UMR support to allow partial page table update IB/mlx5: Remove per-MR pas and dma pointers RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs ... | 19 December 2014, 04:10:44 UTC |
018cb13 | Linus Torvalds | 19 December 2014, 03:08:25 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc patches from Andrew Morton: "A few stragglers" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/testing/selftests/Makefile: alphasort the TARGETS list mm/zsmalloc: adjust order of functions ocfs2: fix journal commit deadlock ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker ocfs2: reflink: fix slow unlink for refcounted file mm/memory.c:do_shared_fault(): add comment .mailmap: Santosh Shilimkar has moved .mailmap: update akpm@osdl.org lib/show_mem.c: add cma reserved information fs/proc/meminfo.c: include cma info in proc/meminfo mm: cma: split cma-reserved in dmesg log hfsplus: fix longname handling mm/mempolicy.c: remove unnecessary is_valid_nodemask() | 19 December 2014, 03:08:25 UTC |
96e869d | Andrew Morton | 19 December 2014, 00:17:43 UTC | tools/testing/selftests/Makefile: alphasort the TARGETS list This list is supposed to be sorted, to reduce patch collisions. Cc: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
66cdef6 | Ganesh Mahendran | 19 December 2014, 00:17:40 UTC | mm/zsmalloc: adjust order of functions Currently functions in zsmalloc.c does not arranged in a readable and reasonable sequence. With the more and more functions added, we may meet below inconvenience. For example: Current functions: void zs_init() { } static void get_maxobj_per_zspage() { } Then I want to add a func_1() which is called from zs_init(), and this new added function func_1() will used get_maxobj_per_zspage() which is defined below zs_init(). void func_1() { get_maxobj_per_zspage() } void zs_init() { func_1() } static void get_maxobj_per_zspage() { } This will cause compiling issue. So we must add a declaration: static void get_maxobj_per_zspage(); before func_1() if we do not put get_maxobj_per_zspage() before func_1(). In addition, puting module_[init|exit] functions at the bottom of the file conforms to our habit. So, this patch ajusts function sequence as: /* helper functions */ ... obj_location_to_handle() ... /* Some exported functions */ ... zs_map_object() zs_unmap_object() zs_malloc() zs_free() zs_init() zs_exit() Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
136f49b | Junxiao Bi | 19 December 2014, 00:17:37 UTC | ocfs2: fix journal commit deadlock For buffer write, page lock will be got in write_begin and released in write_end, in ocfs2_write_end_nolock(), before it unlock the page in ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask for the read lock of journal->j_trans_barrier. Holding page lock and ask for journal->j_trans_barrier breaks the locking order. This will cause a deadlock with journal commit threads, ocfs2cmt will get write lock of journal->j_trans_barrier first, then it wakes up kjournald2 to do the commit work, at last it waits until done. To commit journal, kjournald2 needs flushing data first, it needs get the cache page lock. Since some ocfs2 cluster locks are holding by write process, this deadlock may hung the whole cluster. unlock pages before ocfs2_run_deallocs() can fix the locking order, also put unlock before ocfs2_commit_trans() to make page lock is unlocked before j_trans_barrier to preserve unlocking order. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
1e58958 | Joseph Qi | 19 December 2014, 00:17:34 UTC | ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker Commit ac4fef4d23ed ("ocfs2/dlm: do not purge lockres that is queued for assert master") may have the following possible race case: dlm_dispatch_assert_master dlm_wq ======================================================================== queue_work(dlm->quedlm_worker, &dlm->dispatched_work); dispatch work, dlm_lockres_drop_inflight_worker *BUG_ON(res->inflight_assert_workers == 0)* dlm_lockres_grab_inflight_worker inflight_assert_workers++ So ensure inflight_assert_workers to be increased first. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Xue jiufei <xuejiufei@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
f62f12b | Junxiao Bi | 19 December 2014, 00:17:32 UTC | ocfs2: reflink: fix slow unlink for refcounted file When running ocfs2 test suite multiple nodes reflink stress test, for a 4 nodes cluster, every unlink() for refcounted file needs about 700s. The slow unlink is caused by the contention of refcount tree lock since all nodes are unlink files using the same refcount tree. When the unlinking file have many extents(over 1600 in our test), most of the extents has refcounted flag set. In ocfs2_commit_truncate(), it will execute the following call trace for every extents. This means it needs get and released refcount tree lock about 1600 times. And when several nodes are do this at the same time, the performance will be very low. ocfs2_remove_btree_range() -- ocfs2_lock_refcount_tree() ---- ocfs2_refcount_lock() ------ __ocfs2_cluster_lock() ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do lock/unlock once can improve a lot performance. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Wengang <wen.gang.wang@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
d82fa87 | Andrew Morton | 19 December 2014, 00:17:29 UTC | mm/memory.c:do_shared_fault(): add comment Belatedly document the changes in commit f0c6d4d295e4 ("mm: introduce do_shared_fault() and drop do_fault()"). Cc: Andi Kleen <ak@linux.intel.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
48332f2 | Santosh Shilimkar | 19 December 2014, 00:17:26 UTC | .mailmap: Santosh Shilimkar has moved Add my new email address along with kernel.org email id Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
7d19c8f | Andrew Morton | 19 December 2014, 00:17:23 UTC | .mailmap: update akpm@osdl.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
49abd8c | Vishnu Pratap Singh | 19 December 2014, 00:17:21 UTC | lib/show_mem.c: add cma reserved information Add cma reserved information which is currently shown as a part of total reserved only. This patch is continuation of our previous cma patches related to this. https://lkml.org/lkml/2014/10/20/64 https://lkml.org/lkml/2014/10/22/383 [akpm@linux-foundation.org: remove hopefully-unneeded ifdefs] Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
47f8f92 | Pintu Kumar | 19 December 2014, 00:17:18 UTC | fs/proc/meminfo.c: include cma info in proc/meminfo This patch include CMA info (CMATotal, CMAFree) in /proc/meminfo. Currently, in a CMA enabled system, if somebody wants to know the total CMA size declared, there is no way to tell, other than the dmesg or /var/log/messages logs. With this patch we are showing the CMA info as part of meminfo, so that it can be determined at any point of time. This will be populated only when CMA is enabled. Below is the sample output from a ARM based device with RAM:512MB and CMA:16MB. MemTotal: 471172 kB MemFree: 111712 kB MemAvailable: 271172 kB . . . CmaTotal: 16384 kB CmaFree: 6144 kB This patch also fix below checkpatch errors that were found during these changes. ERROR: space required after that ',' (ctx:ExV) 199: FILE: fs/proc/meminfo.c:199: + ,atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10) ^ ERROR: space required after that ',' (ctx:ExV) 202: FILE: fs/proc/meminfo.c:202: + ,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * ^ ERROR: space required after that ',' (ctx:ExV) 206: FILE: fs/proc/meminfo.c:206: + ,K(totalcma_pages) ^ total: 3 errors, 0 warnings, 2 checks, 236 lines checked Signed-off-by: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
e48322a | Pintu Kumar | 19 December 2014, 00:17:15 UTC | mm: cma: split cma-reserved in dmesg log When the system boots up, in the dmesg logs we can see the memory statistics along with total reserved as below. Memory: 458840k/458840k available, 65448k reserved, 0K highmem When CMA is enabled, still the total reserved memory remains the same. However, the CMA memory is not considered as reserved. But, when we see /proc/meminfo, the CMA memory is part of free memory. This creates confusion. This patch corrects the problem by properly subtracting the CMA reserved memory from the total reserved memory in dmesg logs. Below is the dmesg snapshot from an arm based device with 512MB RAM and 12MB single CMA region. Before this change: Memory: 458840k/458840k available, 65448k reserved, 0K highmem After this change: Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem Signed-off-by: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
89ac9b4 | Sougata Santra | 19 December 2014, 00:17:12 UTC | hfsplus: fix longname handling Longname is not correctly handled by hfsplus driver. If an attempt to create a longname(>255) file/directory is made, it succeeds by creating a file/directory with HFSPLUS_MAX_STRLEN and incorrect catalog key. Thus leaving the volume in an inconsistent state. This patch fixes this issue. Although lookup is always called first to create a negative entry, so just doing a check in lookup would probably fix this issue. I choose to propagate error to other iops as well. Please NOTE: I have factored out hfsplus_cat_build_key_with_cnid from hfsplus_cat_build_key, to avoid unncessary branching. Thanks a lot. TEST: ------ dir="TEST_DIR" cdir=`pwd` name255="_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_1234" name256="${name255}5" mkdir $dir cd $dir touch $name255 rm -f $name255 touch $name256 ls -la cd $cdir rm -rf $dir RESULT: ------- [sougata@ultrabook tmp]$ cdir=`pwd` [sougata@ultrabook tmp]$ name255="_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_1234" [sougata@ultrabook tmp]$ name256="${name255}5" [sougata@ultrabook tmp]$ [sougata@ultrabook tmp]$ mkdir $dir [sougata@ultrabook tmp]$ cd $dir [sougata@ultrabook TEST_DIR]$ touch $name255 [sougata@ultrabook TEST_DIR]$ rm -f $name255 [sougata@ultrabook TEST_DIR]$ touch $name256 [sougata@ultrabook TEST_DIR]$ ls -la ls: cannot access _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234: No such file or directory total 0 drwxrwxr-x 1 sougata sougata 3 Feb 20 19:56 . drwxrwxrwx 1 root root 6 Feb 20 19:56 .. -????????? ? ? ? ? ? _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234 [sougata@ultrabook TEST_DIR]$ cd $cdir [sougata@ultrabook tmp]$ rm -rf $dir rm: cannot remove `TEST_DIR': Directory not empty -ENAMETOOLONG returned from hfsplus_asc2uni was not propaged to iops. This allowed hfsplus to create files/directories with HFSPLUS_MAX_STRLEN and incorrect keys, leaving the FS in an inconsistent state. This patch fixes this issue. Signed-off-by: Sougata Santra <sougata@tuxera.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
859f7ef | Zhihui Zhang | 19 December 2014, 00:17:09 UTC | mm/mempolicy.c: remove unnecessary is_valid_nodemask() When nodes is true, nsc->mask2 has already been filtered by nsc->mask1, which has already factored in node_states[N_MEMORY]. Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
ae450e2 | Nicholas Bellinger | 19 December 2014, 00:49:23 UTC | target: Allow AllRegistrants to re-RESERVE existing reservation This patch changes core_scsi3_pro_release() logic to allow an existing AllRegistrants type reservation to be re-reserved by any registered I_T nexus. This addresses a issue where AllRegistrants type RESERVE was receiving RESERVATION_CONFLICT status if dev_pr_res_holder did not match the same I_T nexus, instead of just returning GOOD status following spc4r34 Section 5.9.9: "If the device server receives a PERSISTENT RESERVE OUT command with RESERVE service action where the TYPE field and the SCOPE field contain the same values as the existing type and scope from a persistent reservation holder, it shall not make any change to the existing persistent reservation and shall complete the command with GOOD status." Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: Lee Duncan <lduncan@suse.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 19 December 2014, 01:08:32 UTC |
00c845d | Linus Torvalds | 19 December 2014, 00:41:13 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix NBMA tunnel mac header handling in GRE, from Timo Teräs. 2) Fix a NAPI race in the fec driver, from Nimrod Andy. 3) The new IFF_VNET_LE bit is outside the size of the flags member it is stored in (which is 16-bits), store the state locally in the drivers. From Michael S Tsirkin. 4) We are kicking the tires with the new wireless maintainership situation. Bluetooth fixes via Johan Hedberg, and mac80211 fixes from Johannes Berg. 5) Fix locking and leaks in geneve driver, from Jesse Gross. 6) Make netlink TX mmap code always copy, so we don't have to be potentially exposed to the user changing the underlying contents from underneath us. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) be2net: Fix incorrect setting of tunnel offload flag in netdev features bnx2x: fix typos in "configure" xen-netback: support frontends without feature-rx-notify again MAINTAINERS: changes for wireless cxgb4: Fix decoding QSA module for ethtool get settings geneve: Fix races between socket add and release. geneve: Remove socket and offload handlers at destruction. netlink: Don't reorder loads/stores before marking mmap netlink frame as available netlink: Always copy on mmap TX. Bluetooth: Fix bug with filter in service discovery optimization mac80211: free management frame keys when removing station net: Disallow providing non zero VLAN ID for NIC drivers FDB add flow net/mlx4: Cache line CQE/EQE stride fixes net: fec: Fix NAPI race xen-netfront: use napi_complete() correctly to prevent Rx stalling ip_tunnel: Add missing validation of encap type to ip_tunnel_encap_setup() ip_tunnel: Add sanity checks to ip_tunnel_encap_add_ops() net: Allow FIXED_PHY to be modular. if_tun: drop broken IFF_VNET_LE macvtap: drop broken IFF_VNET_LE ... | 19 December 2014, 00:41:13 UTC |
28ee580 | Linus Torvalds | 19 December 2014, 00:32:11 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fix from David Miller: "Sparc32 locking bug fix from Andreas Larsson" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: destroy_context() and switch_mm() needs to disable interrupts. | 19 December 2014, 00:32:11 UTC |
22943a6 | Linus Torvalds | 19 December 2014, 00:26:41 UTC | Merge tag 'arc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull arch/arc updates from Vineet Gupta: "Minor updates for ARC for 3.19" * tag 'arc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: rename default defconfig ARC: [nsimosci] move peripherals to match model to FPGA ARC: document memory clobber in irq control macros ARC: R-M-W assist locks only needed for !LLSC ARC: add power management options | 19 December 2014, 00:26:41 UTC |
39757e7 | Linus Torvalds | 19 December 2014, 00:13:40 UTC | Merge tag 'nios2-fixes-v3.19' of git://git.rocketboards.org/linux-socfpga-next Pull arch/nios2 fixes from Ley Foon Tan: - add definition of ioremap_wc to io.h to fix build error from make allmodconfig - fix make defconfig - fix sparse error * tag 'nios2-fixes-v3.19' of git://git.rocketboards.org/linux-socfpga-next: nios2/uaccess: fix sparse errors nios2: enable "make defconfig" nios2: add definition of ioremap_wc to io.h | 19 December 2014, 00:13:40 UTC |
66dcff8 | Linus Torvalds | 19 December 2014, 00:05:28 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM update from Paolo Bonzini: "3.19 changes for KVM: - spring cleaning: removed support for IA64, and for hardware- assisted virtualization on the PPC970 - ARM, PPC, s390 all had only small fixes For x86: - small performance improvements (though only on weird guests) - usual round of hardware-compliancy fixes from Nadav - APICv fixes - XSAVES support for hosts and guests. XSAVES hosts were broken because the (non-KVM) XSAVES patches inadvertently changed the KVM userspace ABI whenever XSAVES was enabled; hence, this part is going to stable. Guest support is just a matter of exposing the feature and CPUID leaves support" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits) KVM: move APIC types to arch/x86/ KVM: PPC: Book3S: Enable in-kernel XICS emulation by default KVM: PPC: Book3S HV: Improve H_CONFER implementation KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register KVM: PPC: Book3S HV: Remove code for PPC970 processors KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions KVM: PPC: Book3S HV: Simplify locking around stolen time calculations arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function arch: powerpc: kvm: book3s_pr.c: Remove unused function arch: powerpc: kvm: book3s.c: Remove some unused functions arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked KVM: PPC: Book3S HV: ptes are big endian KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI KVM: PPC: Book3S HV: Fix KSM memory corruption KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI KVM: PPC: Book3S HV: Fix computation of tlbie operand KVM: PPC: Book3S HV: Add missing HPTE unlock KVM: PPC: BookE: Improve irq inject tracepoint arm/arm64: KVM: Require in-kernel vgic for the arch timers ... | 19 December 2014, 00:05:28 UTC |
91ed9e8 | Alexander Graf | 18 December 2014, 09:17:08 UTC | KVM: PPC: E500: Compile fix in this_cpu_write Commit 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") introduced compile breakage to the e500 target by introducing invalid automatically created C syntax. Fix up the breakage and make the code compile again. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 00:02:26 UTC |
86c8fc4 | David S. Miller | 18 December 2014, 20:33:49 UTC | Merge tag 'mac80211-for-davem-2014-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2014-12-18 Also from me a first pull request - we have a number of really old issues that happened to crop up now with new work (or just more testing) in the right areas as well as some small bugs newly introduced in 3.19. Let me know if there are any problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 20:33:49 UTC |
7dce675 | David S. Miller | 18 December 2014, 20:32:27 UTC | Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2014-12-17 Here's the first direct (i.e. skipping the wireless tree) bluetooth pull request for you, intended for 3.19. It's just one patch: a fix from Marcel for for remote service discovery filtering which also fixes a 'used uninitialized' compiler warning. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 20:32:27 UTC |
c297abf | Eric W. Biederman | 18 December 2014, 16:57:19 UTC | mnt: Fix a memory stomp in umount While reviewing the code of umount_tree I realized that when we append to a preexisting unmounted list we do not change pprev of the former first item in the list. Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on the former first item of the list will stomp unmounted.first leaving it set to some random mount point which we are likely to free soon. This isn't likely to hit, but if it does I don't know how anyone could track it down. [ This happened because we don't have all the same operations for hlist's as we do for normal doubly-linked lists. In particular, list_splice() is easy on our standard doubly-linked lists, while hlist_splice() doesn't exist and needs both start/end entries of the hlist. And commit 38129a13e6e7 incorrectly open-coded that missing hlist_splice(). We should think about making these kinds of "mindless" conversions easier to get right by adding the missing hlist helpers - Linus ] Fixes: 38129a13e6e71f666e0468e99fdd932a687b4d7e switch mnt_hash to hlist Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2014, 19:22:02 UTC |
3875f15 | Kyle McMartin | 18 December 2014, 17:57:14 UTC | uapi/linux/target_core_user.h: fix headers_install.sh badness scripts/headers_install.sh will transform __packed to __attribute__((packed)), so the #ifndef is not necessary. (and, in fact, it's problematic, because we'll end up with the header containing: #ifndef __attribute__((packed)) #define __attribu... and so forth.) Cc: stable@vger.kernel.org # 3.18 Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 18 December 2014, 19:07:27 UTC |
ac9a3d8 | Sriharsha Basavapatna | 19 December 2014, 04:30:18 UTC | be2net: Fix incorrect setting of tunnel offload flag in netdev features An earlier commit to resolve an issue with encapsulation offloads missed setting a bit in the outer netdev features flag. This results in loss of TSO feature on a VxLAN interface. Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:51:29 UTC |
bf27c35 | Jiri Benc | 18 December 2014, 08:04:35 UTC | bnx2x: fix typos in "configure" Noticed when debugging ptp. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:50:36 UTC |
26c0e10 | David Vrabel | 18 December 2014, 11:13:06 UTC | xen-netback: support frontends without feature-rx-notify again Commit bc96f648df1bbc2729abbb84513cf4f64273a1f1 (xen-netback: make feature-rx-notify mandatory) incorrectly assumed that there were no frontends in use that did not support this feature. But the frontend driver in MiniOS does not and since this is used by (qemu) stubdoms, these stopped working. Netback sort of works as-is in this mode except: - If there are no Rx requests and the internal Rx queue fills, only the drain timeout will wake the thread. The default drain timeout of 10 s would give unacceptable pauses. - If an Rx stall was detected and the internal Rx queue is drained, then the Rx thread would never wake. Handle these two cases (when feature-rx-notify is disabled) by: - Reducing the drain timeout to 30 ms. - Disabling Rx stall detection. Reported-by: John <jw@nuclearfallout.net> Tested-by: John <jw@nuclearfallout.net> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:49:49 UTC |
66d0f7e | Andreas Larsson | 18 December 2014, 12:23:23 UTC | sparc32: destroy_context() and switch_mm() needs to disable interrupts. Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa1ef0 ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:47:54 UTC |
2ec1c17 | Rafael J. Wysocki | 18 December 2014, 17:44:53 UTC | Merge branches 'pm-opp', 'pm-cpufreq' and 'pm-tools' * pm-opp: PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic() PM / OPP: handle allocation of device_opp in a separate routine PM / OPP: reuse find_device_opp() instead of duplicating code PM / OPP: Staticize __dev_pm_opp_remove() PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp' * pm-cpufreq: MAINTAINERS: add entry for intel_pstate intel_pstate: Add a few comments intel_pstate: add kernel parameter to force loading * pm-tools: Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" | 18 December 2014, 17:44:53 UTC |
035f10e | Rafael J. Wysocki | 18 December 2014, 17:44:05 UTC | Merge branch 'pm-runtime' * pm-runtime: power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM | 18 December 2014, 17:44:05 UTC |
0a06664 | Rafael J. Wysocki | 18 December 2014, 17:43:16 UTC | Merge branches 'acpi-fan', 'acpi-video' and 'acpi-ec' * acpi-fan: ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devices * acpi-video: ACPI / video: update the skip case for acpi_video_device_in_dod() * acpi-ec: ACPI / EC: Fix unexpected ec_remove_handlers() invocations | 18 December 2014, 17:43:16 UTC |
be10f60 | Rafael J. Wysocki | 18 December 2014, 17:42:56 UTC | Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm' * acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled | 18 December 2014, 17:42:56 UTC |
0e324cf | John W. Linville | 17 December 2014, 17:07:05 UTC | MAINTAINERS: changes for wireless http://marc.info/?l=linux-wireless&m=141883202530292&w=2 This makes it official... :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:41:12 UTC |
5aa80e5 | Hariprasad Shenai | 17 December 2014, 12:06:00 UTC | cxgb4: Fix decoding QSA module for ethtool get settings QSA module was getting decoded as QSFP module in ethtool get settings, this patch fixes it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:39:16 UTC |
1206940 | Jesse Gross | 17 December 2014, 02:25:32 UTC | geneve: Fix races between socket add and release. Currently, searching for a socket to add a reference to is not synchronized with deletion of sockets. This can result in use after free if there is another operation that is removing a socket at the same time. Solving this requires both holding the appropriate lock and checking the refcount to ensure that it has not already hit zero. Inspired by a related (but not exactly the same) issue in the VXLAN driver. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:38:13 UTC |
7ed767f | Jesse Gross | 17 December 2014, 02:25:31 UTC | geneve: Remove socket and offload handlers at destruction. Sockets aren't currently removed from the the global list when they are destroyed. In addition, offload handlers need to be cleaned up as well. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:38:13 UTC |
a18e6a1 | Thomas Graf | 18 December 2014, 10:30:26 UTC | netlink: Don't reorder loads/stores before marking mmap netlink frame as available Each mmap Netlink frame contains a status field which indicates whether the frame is unused, reserved, contains data or needs to be skipped. Both loads and stores may not be reordeded and must complete before the status field is changed and another CPU might pick up the frame for use. Use an smp_mb() to cover needs of both types of callers to netlink_set_status(), callers which have been reading data frame from the frame, and callers which have been filling or releasing and thus writing to the frame. - Example code path requiring a smp_rmb(): memcpy(skb->data, (void *)hdr + NL_MMAP_HDRLEN, hdr->nm_len); netlink_set_status(hdr, NL_MMAP_STATUS_UNUSED); - Example code path requiring a smp_wmb(): hdr->nm_uid = from_kuid(sk_user_ns(sk), NETLINK_CB(skb).creds.uid); hdr->nm_gid = from_kgid(sk_user_ns(sk), NETLINK_CB(skb).creds.gid); netlink_frame_flush_dcache(hdr); netlink_set_status(hdr, NL_MMAP_STATUS_VALID); Fixes: f9c228 ("netlink: implement memory mapped recvmsg()") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:35:55 UTC |
4682a03 | David Miller | 16 December 2014, 22:58:17 UTC | netlink: Always copy on mmap TX. Checking the file f_count and the nlk->mapped count is not completely sufficient to prevent the mmap'd area contents from changing from under us during netlink mmap sendmsg() operations. Be careful to sample the header's length field only once, because this could change from under us as well. Fixes: 5fd96123ee19 ("netlink: implement memory mapped sendmsg()") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> | 18 December 2014, 17:35:23 UTC |
d70a1b9 | Jiri Jaburek | 18 December 2014, 01:03:19 UTC | ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC The Arcam rPAC seems to have the same problem - whenever anything (alsamixer, udevd, 3.9+ kernel from 60af3d037eb8c, ..) attempts to access mixer / control interface of the card, the firmware "locks up" the entire device, resulting in SNDRV_PCM_IOCTL_HW_PARAMS failed (-5): Input/output error from alsa-lib. Other operating systems can somehow read the mixer (there seems to be playback volume/mute), but any manipulation is ignored by the device (which has hardware volume controls). Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Jaburek <jjaburek@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 16:49:50 UTC |
506b62c | Kailang Yang | 18 December 2014, 09:07:44 UTC | ALSA: hda/realtek - New codec support for ALC298 Add new support for ALC298 codec. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 16:48:51 UTC |
ba90f26 | Fabio Estevam | 16 December 2014, 00:49:59 UTC | watchdog: imx2_wdt: Fix the argument of watchdog_active() Fix the following build warning by passing the expected argument type to watchdog_active(): drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend': drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default] In file included from drivers/watchdog/imx2_wdt.c:38:0: include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **' Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 18 December 2014, 15:01:20 UTC |
aefbaf3 | Xiubo Li | 22 September 2014, 10:00:52 UTC | watchdog: imx2_wdt: Add power management support. Add power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 18 December 2014, 15:01:14 UTC |
3fb2f42 | Andy Lutomirski | 17 December 2014, 22:48:30 UTC | x86/tls: Don't validate lm in set_thread_area() after all It turns out that there's a lurking ABI issue. GCC, when compiling this in a 32-bit program: struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; will leave .lm uninitialized. This means that anything in the kernel that reads user_desc.lm for 32-bit tasks is unreliable. Revert the .lm check in set_thread_area(). The value never did anything in the first place. Fixes: 0e58af4e1d21 ("x86/tls: Disallow unusual TLS segments") Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # Only if 0e58af4e1d21 is backported Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/d7875b60e28c512f6a6fc0baf5714d58e7eaadbb.1418856405.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 18 December 2014, 11:12:26 UTC |
d70a54e | Greg Kurz | 12 December 2014, 11:37:40 UTC | powerpc/powernv: Ignore smt-enabled on Power8 and later Starting with POWER8, the subcore logic relies on all threads of a core being booted so that they can participate in split mode switches. So on those machines we ignore the smt_enabled_at_boot setting (smt-enabled on the kernel command line). Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [mpe: Update comment and change log to be more precise] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 18 December 2014, 08:59:21 UTC |
2c4aa55 | Paolo Bonzini | 18 December 2014, 08:39:55 UTC | Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into HEAD Patch queue for ppc - 2014-12-18 Highights this time around: - Removal of HV support for 970. It became a maintenance burden and received practically no testing. POWER8 with HV is available now, so just grab one of those boxes if PR isn't enough for you. - Some bug fixes and performance improvements - Tracepoints for book3s_hv | 18 December 2014, 08:39:55 UTC |
cb5281a | Paolo Bonzini | 17 December 2014, 17:17:20 UTC | KVM: move APIC types to arch/x86/ They are not used anymore by IA64, move them away. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 December 2014, 08:39:51 UTC |
505e428 | Michael S. Tsirkin | 14 December 2014, 16:52:51 UTC | powerpc/uaccess: Allow get_user() with bitwise types At the moment, if p and x are both of the same bitwise type (eg. __le32), get_user(x, p) produces a sparse warning. This is because *p is loaded into a long then cast back to typeof(*p). When typeof(*p) is a bitwise type (which is uncommon), such a cast needs __force, otherwise sparse produces a warning. For non-bitwise types __force should have no effect, and should not hide any legitimate errors. Note that we are casting to typeof(*p) not typeof(x). Even with the cast, if x and *p are of different types we should get the warning, so I think we are not loosing the ability to detect any actual errors. virtio would like to use bitwise types with get_user() so fix these spurious warnings by adding __force. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> [mpe: Fill in changelog with more details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 18 December 2014, 08:11:09 UTC |
fd112f1 | Eliot Blennerhassett | 18 December 2014, 04:57:15 UTC | ALSA: asihpi: update to HPI version 4.14 This corresponds with updated asihpi firmware in alsa-firmware repo Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 07:48:47 UTC |
17d4de4 | Eliot Blennerhassett | 18 December 2014, 04:57:14 UTC | ALSA: asihpi: increase tuner pad cache size Increase size allocated for PAD (programme associated data) control. This is used by newer tuner products. Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 07:48:24 UTC |
4398643 | Eliot Blennerhassett | 18 December 2014, 04:57:13 UTC | ALSA: asihpi: relax firmware version check Some products firmware is no longer being updated e.g. dsp5000, dsp8700 but it should continue to work with updated HPI versions. Avoid regression by allowing this firmware to be loaded as long as major version is the same. Warn about mismatching versions, as matching versions are preferred. Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 07:40:06 UTC |
c99b9e8 | Chris J Arges | 17 December 2014, 22:09:35 UTC | ALSA: usb-audio: Fix Scarlett 6i6 initialization typo The num_controls field was incorrectly set to 0 causing 6i6 to not be initialized. Set this to 9. Reported-and-tested-by: Mark Roberts <sunifiram@gmail.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2014, 07:39:17 UTC |
6aaba7c | Ingo Molnar | 18 December 2014, 06:23:55 UTC | Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - The mmap address range for the ring buffer now is calculated using the contents of /proc/sys/kernel/perf_event_mlock_kb. This fixes an -EPERM case where 'trace' was trying to use more than what is configured on perf_event_mlock_kb. (Arnaldo Carvalho de Melo) Infrastructure changes: - Move bitops definitions so that they match the header file hierarchy in the kernel sources where that code came from. (Arnaldo Carvalho de Melo) - Adopt round{down,up}_pow_of_two from the kernel and use it instead of equivalent code, so that we reuse more kernel code and make tools/ look more like kernel source code, to encourage further contributions from kernel hackers (Arnaldo Carvalho de Melo) - Fix use after free in filename__read_build_id (Mitchell Krome) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 18 December 2014, 06:23:55 UTC |
44e8967 | Linus Torvalds | 18 December 2014, 02:47:01 UTC | Ceph: remove left-over reject file Neither Sage nor I noticed that Zheng Yan had mistakenly committed fs/ceph/super.h.rej as part of commit 31c542a199d7 ("ceph: add inline data to pagecache"). Remove it. Requested-by: Yan, Zheng <ukernel@gmail.com> Cc: Sage Weil <sweil@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2014, 02:47:01 UTC |
b0a65b0 | Kees Cook | 12 December 2014, 03:06:49 UTC | param: do not set store func without write perm When a module_param is defined without DAC write permissions, it can still be changed at runtime and updated. Drivers using a 0444 permission may be surprised that these values can still be changed. For drivers that want to allow updates, any S_IW* flag will set the "store" function as before. Drivers without S_IW* flags will have the "store" function unset, unforcing a read-only value. Drivers that wish neither "store" nor "get" can continue to use "0" for perms to stay out of sysfs entirely. Old behavior: # cd /sys/module/snd/parameters # ls -l total 0 -r--r--r-- 1 root root 4096 Dec 11 13:55 cards_limit -r--r--r-- 1 root root 4096 Dec 11 13:55 major -r--r--r-- 1 root root 4096 Dec 11 13:55 slots # cat major 116 # echo -1 > major -bash: major: Permission denied # chmod u+w major # echo -1 > major # cat major -1 New behavior: ... # chmod u+w major # echo -1 > major -bash: echo: write error: Input/output error Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 18 December 2014, 02:08:51 UTC |
5766650 | Linus Torvalds | 18 December 2014, 00:03:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "The big item here is support for inline data for CephFS and for message signatures from Zheng. There are also several bug fixes, including interrupted flock request handling, 0-length xattrs, mksnap, cached readdir results, and a message version compat field. Finally there are several cleanups from Ilya, Dan, and Markus. Note that there is another series coming soon that fixes some bugs in the RBD 'lingering' requests, but it isn't quite ready yet" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits) ceph: fix setting empty extended attribute ceph: fix mksnap crash ceph: do_sync is never initialized libceph: fixup includes in pagelist.h ceph: support inline data feature ceph: flush inline version ceph: convert inline data to normal data before data write ceph: sync read inline data ceph: fetch inline data when getting Fcr cap refs ceph: use getattr request to fetch inline data ceph: add inline data to pagecache ceph: parse inline data in MClientReply and MClientCaps libceph: specify position of extent operation libceph: add CREATE osd operation support libceph: add SETXATTR/CMPXATTR osd operations support rbd: don't treat CEPH_OSD_OP_DELETE as extent op ceph: remove unused stringification macros libceph: require cephx message signature by default ceph: introduce global empty snap context ceph: message versioning fixes ... | 18 December 2014, 00:03:12 UTC |
476ce5e | Anton Blanchard | 03 December 2014, 02:30:42 UTC | KVM: PPC: Book3S: Enable in-kernel XICS emulation by default The in-kernel XICS emulation is faster than doing it all in QEMU and it has got a lot of testing, so enable it by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> | 17 December 2014, 21:23:22 UTC |
87c31b3 | Linus Torvalds | 17 December 2014, 20:31:40 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace related fixes from Eric Biederman: "As these are bug fixes almost all of thes changes are marked for backporting to stable. The first change (implicitly adding MNT_NODEV on remount) addresses a regression that was created when security issues with unprivileged remount were closed. I go on to update the remount test to make it easy to detect if this issue reoccurs. Then there are a handful of mount and umount related fixes. Then half of the changes deal with the a recently discovered design bug in the permission checks of gid_map. Unix since the beginning has allowed setting group permissions on files to less than the user and other permissions (aka ---rwx---rwx). As the unix permission checks stop as soon as a group matches, and setgroups allows setting groups that can not later be dropped, results in a situtation where it is possible to legitimately use a group to assign fewer privileges to a process. Which means dropping a group can increase a processes privileges. The fix I have adopted is that gid_map is now no longer writable without privilege unless the new file /proc/self/setgroups has been set to permanently disable setgroups. The bulk of user namespace using applications even the applications using applications using user namespaces without privilege remain unaffected by this change. Unfortunately this ix breaks a couple user space applications, that were relying on the problematic behavior (one of which was tools/selftests/mount/unprivileged-remount-test.c). To hopefully prevent needing a regression fix on top of my security fix I rounded folks who work with the container implementations mostly like to be affected and encouraged them to test the changes. > So far nothing broke on my libvirt-lxc test bed. :-) > Tested with openSUSE 13.2 and libvirt 1.2.9. > Tested-by: Richard Weinberger <richard@nod.at> > Tested on Fedora20 with libvirt 1.2.11, works fine. > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com> > Ok, thanks - yes, unprivileged lxc is working fine with your kernels. > Just to be sure I was testing the right thing I also tested using > my unprivileged nsexec testcases, and they failed on setgroup/setgid > as now expected, and succeeded there without your patches. > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> > I tested this with Sandstorm. It breaks as is and it works if I add > the setgroups thing. > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: userns: Unbreak the unprivileged remount tests userns; Correct the comment in map_write userns: Allow setting gid_maps without privilege when setgroups is disabled userns: Add a knob to disable setgroups on a per user namespace basis userns: Rename id_map_mutex to userns_state_mutex userns: Only allow the creator of the userns unprivileged mappings userns: Check euid no fsuid when establishing an unprivileged uid mapping userns: Don't allow unprivileged creation of gid mappings userns: Don't allow setgroups until a gid mapping has been setablished userns: Document what the invariant required for safe unprivileged mappings. groups: Consolidate the setgroups permission checks mnt: Clear mnt_expire during pivot_root mnt: Carefully set CL_UNPRIVILEGED in clone_mnt mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers. umount: Do not allow unmounting rootfs. umount: Disallow unprivileged mount force mnt: Update unprivileged remount test mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount | 17 December 2014, 20:31:40 UTC |
ea8ae25 | Marcel Holtmann | 17 December 2014, 17:18:08 UTC | Bluetooth: Fix bug with filter in service discovery optimization The optimization for filtering out extended inquiry results, advertising reports or scan response data based on provided UUID list has a logic bug. In case no match is found in the advertising data, the scan response is ignored and not checked against the filter. This will lead to events being filtered wrongly. Change the code to actually only drop the events when the scan response data is not present. If it is present, it needs to be checked against the provided filter. The patch is a bit more complex than it needs to be. That is because it also fixes this compiler warning that some gcc versions produce. CC net/bluetooth/mgmt.o net/bluetooth/mgmt.c: In function ‘mgmt_device_found’: net/bluetooth/mgmt.c:7028:7: warning: ‘match’ may be used uninitialized in this function [-Wmaybe-uninitialized] bool match; ^ It seems that gcc can not clearly figure out the context of the match variable. So just change the branches for the extended inquiry response and advertising data around so that it is clear. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> | 17 December 2014, 20:03:49 UTC |
f045bbb | Linus Torvalds | 17 December 2014, 19:59:04 UTC | mmu_gather: fix over-eager tlb_flush_mmu_free() calling Dave Hansen reports that commit fb7332a9fedf ("mmu_gather: move minimal range calculations into generic code") caused a performance problem: "tlb_finish_mmu() goes up about 9x in the profiles (~0.4%->3.6%) and tlb_flush_mmu_free() takes about 3.1% of CPU time with the patch applied, but does not show up at all on the commit before" and the reason is that Will moved the test for whether we need to flush from tlb_flush_mmu() into tlb_flush_mmu_tlbonly(). But that meant that tlb_flush_mmu_free() basically lost that check. Move it back into tlb_flush_mmu() where it belongs, so that it covers both tlb_flush_mmu_tlbonly() _and_ tlb_flush_mmu_free(). Reported-and-tested-by: Dave Hansen <dave@sr71.net> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 December 2014, 19:59:04 UTC |
cf3c0a1 | Linus Torvalds | 17 December 2014, 19:52:37 UTC | x86: mm: fix VM_FAULT_RETRY handling My commit 26178ec11ef3 ("x86: mm: consolidate VM_FAULT_RETRY handling") had a really stupid typo: the FAULT_FLAG_USER bit is in the 'flags' variable, not the 'fault' variable. Duh, The one silver lining in this is that Dave finding this at least confirms that trinity actually triggers this special path easily, in a way normal use does not. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 December 2014, 19:52:37 UTC |
cc66974 | Linus Torvalds | 17 December 2014, 18:44:22 UTC | Merge tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - s390 support (Frank Blaschka) - Enable iommu-type1 for ARM SMMU (Will Deacon) * tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio: drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU vfio: make vfio run on s390 | 17 December 2014, 18:44:22 UTC |