| 29a4b93 | Avi Kivity | 19 May 2009, 10:29:27 UTC | KVM: MMU: Allow 4K ptes with bit 7 (PAT) set Bit 7 is perfectly legal in the 4K page leve; it is used for the PAT. Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:29 UTC |
| e244584 | Izik Eidus | 10 June 2009, 16:23:24 UTC | KVM: Fix dirty bit tracking for slots with large pages When slot is already allocated and being asked to be tracked we need to break the large pages. This code flush the mmu when someone ask a slot to start dirty bit tracking. Cc: stable@kernel.org Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:29 UTC |
| 4075ea8 | Linus Torvalds | 26 June 2009, 16:39:40 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: misc small cleanups amd64_edac: fix ecc_enable_override handling amd64_edac: check only ECC bit in amd64_determine_edac_cap | 26 June 2009, 16:39:40 UTC |
| 919a6d1 | Linus Torvalds | 26 June 2009, 16:39:02 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits) powerpc/rtas: Fix watchdog driver temperature read functionality powerpc/mm: Fix potential access to freed pages when using hugetlbfs powerpc/440: Fix warning early debug code powerpc/of: Fix usage of dev_set_name() in of_device_alloc() powerpc/pasemi: Use raw spinlock in SMP TB sync powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock powerpc/rtas: Turn rtas lock into a raw spinlock powerpc: Add irqtrace support for 32-bit powerpc powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel powerpc/BSR: add 4096 byte BSR size powerpc: Map more memory early on 601 processors powerpc/pmac: Fix DMA ops for MacIO devices powerpc/mm: Make k(un)map_atomic out of line powerpc: Fix mpic alloc warning powerpc: Fix output from show_regs powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP powerpc/amigaone: Limit ISA I/O range to 4k in the device tree powerpc/warp: Platform fix for i2c change powerpc: Have git ignore generated files from dtc compile powerpc/mpic: Fix mapping of "DCR" based MPIC variants ... | 26 June 2009, 16:39:02 UTC |
| cf2acfb | Linus Torvalds | 26 June 2009, 16:37:52 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: video: prevent NULL deref in acpi_get_pci_dev() eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go eeepc-laptop: get the right value for CMSG eeepc-laptop: makes get_acpi() returns -ENODEV eeepc-laptop: right parent device eeepc-laptop: rfkill refactoring eeepc-laptop.c: use pr_fmt and pr_<level> eeepc-laptop: Register as a pci-hotplug device | 26 June 2009, 16:37:52 UTC |
| aada1bc | Linus Torvalds | 26 June 2009, 16:37:19 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] remove unknown mount option warning message [CIFS] remove bkl usage from umount begin cifs: Fix incorrect return code being printed in cFYI messages [CIFS] cleanup asn handling for ntlmssp [CIFS] Copy struct *after* setting the port, instead of before. cifs: remove rw/ro options cifs: fix problems with earlier patches cifs: have cifs parse scope_id out of IPv6 addresses and use it [CIFS] Do not send tree disconnect if session is already disconnected [CIFS] Fix build break cifs: display scopeid in /proc/mounts cifs: add new routine for converting AF_INET and AF_INET6 addrs cifs: have cifs_show_options show forceuid/forcegid options cifs: remove unneeded NULL checks from cifs_show_options | 26 June 2009, 16:37:19 UTC |
| 7e0d8a8 | Linus Torvalds | 26 June 2009, 15:48:42 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix makefile not generating required files sparc32: Fix tftpboot.img Makefile sparc: fix tftpboot.img build sparc32: Fix obvious build issues for tftpboot.img build. sparc64: Fix build warnings in piggyback_64.c sparc64: Don't use alloc_bootmem() in init_IRQ() code paths. | 26 June 2009, 15:48:42 UTC |
| 37da045 | Borislav Petkov | 10 June 2009, 15:36:57 UTC | amd64_edac: misc small cleanups - cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:41 UTC |
| 30c875c | Borislav Petkov | 22 June 2009, 17:42:24 UTC | amd64_edac: fix ecc_enable_override handling amd64_check_ecc_enabled() returns non-zero status when ECC checking/correcting is disabled and this fails further loading of the driver even when 'ecc_enable_override' boot param is used. Fix that by clearing return status in that case. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:41 UTC |
| 584fcff | Borislav Petkov | 10 June 2009, 16:29:54 UTC | amd64_edac: check only ECC bit in amd64_determine_edac_cap Checking whether the machine is using ECC enabled DRAM is done through testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do that instead of testing all bits from the DimmEccEn upwards. Also, remove mci->edac_cap assignment and use value returned from amd64_determine_edac_cap(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:40 UTC |
| fd0cca7 | Benjamin Herrenschmidt | 26 June 2009, 06:58:01 UTC | Merge commit 'kumar/next' into merge | 26 June 2009, 06:58:01 UTC |
| 5ba762c | Adrian Reber | 26 March 2009, 02:05:42 UTC | powerpc/rtas: Fix watchdog driver temperature read functionality Using the RTAS watchdog driver to read out the temperature crashes on a PXCAB: Unable to handle kernel paging request for data at address 0xfe347b50 Faulting instruction address: 0xc00000000001af64 Oops: Kernel access of bad area, sig: 11 [#1] The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is removed by using the function rtas_get_sensor() which does the right thing. Signed-off-by: Adrian Reber <adrian@lisas.de> Acked-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:37 UTC |
| 6c16a74 | Benjamin Herrenschmidt | 15 June 2009, 16:53:43 UTC | powerpc/mm: Fix potential access to freed pages when using hugetlbfs When using 64k page sizes, our PTE pages are split in two halves, the second half containing the "extension" used to keep track of individual 4k pages when not using HW 64k pages. However, our page tables used for hugetlb have a slightly different format and don't carry that "second half". Our code that batched PTEs to be invalidated unconditionally reads the "second half" (to put it into the batch), which means that when called to invalidate hugetlb PTEs, it will access unrelated memory. It breaks when CONFIG_DEBUG_PAGEALLOC is enabled. This fixes it by only accessing the second half when the _PAGE_COMBO bit is set in the first half, which indicates that we are dealing with a "combo" page which represents 16x4k subpages. Anything else shouldn't have this bit set and thus not require loading from the second half. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:36 UTC |
| f694cda | Benjamin Herrenschmidt | 16 June 2009, 15:55:19 UTC | powerpc/440: Fix warning early debug code The function udbg_44x_as1_flush() has the wrong prototype causing a warning when enabling 440 early debug. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:35 UTC |
| 03c01aa | Benjamin Herrenschmidt | 16 June 2009, 15:55:18 UTC | powerpc/of: Fix usage of dev_set_name() in of_device_alloc() dev_set_name() takes a format string, so use it properly and avoid a warning with recent gcc's Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:35 UTC |
| 6893ce6 | Benjamin Herrenschmidt | 16 June 2009, 16:42:51 UTC | powerpc/pasemi: Use raw spinlock in SMP TB sync spin_lock() can hang if called while the timebase is frozen, so use a raw lock instead, also disable interrupts while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:34 UTC |
| c4007a2 | Benjamin Herrenschmidt | 16 June 2009, 16:42:50 UTC | powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock Several platforms use their own copy of what is essentially the same code, using RTAS to synchronize the timebases when bringing up new CPUs. This moves it all into a single common implementation and additionally turns the spinlock into a raw spinlock since the former can rely on the timebase not being frozen when spinlock debugging is enabled, and finally masks interrupts while the timebase is disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:25 UTC |
| f97bb36 | Benjamin Herrenschmidt | 16 June 2009, 16:42:49 UTC | powerpc/rtas: Turn rtas lock into a raw spinlock RTAS currently uses a normal spinlock. However it can be called from contexts where this is not necessarily a good idea. For example, it can be called while syncing timebases, with the core timebase being frozen. Unfortunately, that will deadlock in case of lock contention when spinlock debugging is enabled as the spin lock debugging code will try to use __delay() which ... relies on the timebase being enabled. Also RTAS can be used in some low level IRQ handling code path so it may as well be a raw spinlock for -rt sake. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:27 UTC |
| 5d38902 | Benjamin Herrenschmidt | 17 June 2009, 17:43:59 UTC | powerpc: Add irqtrace support for 32-bit powerpc Based on initial work from: Dale Farnsworth <dale@farnsworth.org> Add the low level irq tracing hooks for 32-bit powerpc needed to enable full lockdep functionality. The approach taken to deal with the code in entry_32.S is that we don't trace all the transitions of MSR:EE when we just turn it off to peek at TI_FLAGS without races. Only when we are calling into C code or returning from exceptions with a state that have changed from what lockdep thinks. There's a little bugger though: If we take an exception that keeps interrupts enabled (such as an alignment exception) while interrupts are enabled, we will call trace_hardirqs_on() on the way back spurriously. Not a big deal, but to get rid of it would require remembering in pt_regs that the exception was one of the type that kept interrupts enabled which we don't know at this stage. (Well, we could test all cases for regs->trap but that sucks too much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Kumar Gala <galak@kernel.crashing.org> | 26 June 2009, 04:37:27 UTC |
| 04a85d1 | Sonny Rao | 18 June 2009, 15:13:04 UTC | powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel On Mon, Nov 17, 2008 at 01:26:13AM -0600, Sonny Rao wrote: > On Fri, Nov 07, 2008 at 04:28:29PM +1100, Paul Mackerras wrote: > > Sonny Rao writes: > > > > > Fix the BSR driver to allow small BSR devices, which are limited to a > > > single 4k space, on a 64k page kernel. Previously the driver would > > > reject the mmap since the size was smaller than PAGESIZE (or because > > > the size was greater than the size of the device). Now, we check for > > > this case use remap_4k_pfn(). Also, take out code to set vm_flags, > > > as the remap_pfn functions will do this for us. > > > > Thanks. > > > > Do we know that the BSR size will always be 4k if it's not a multiple > > of 64k? Is it possible that we could get 8k, 16k or 32k or BSRs? > > If it is possible, what does the user need to be able to do? Do they > > just want to map 4k, or might then want to map the whole thing? > > > Hi Paul, I took a look at changing the driver to reject a request for > mapping more than a single 4k page, however the only indication we get > of the requested size in the mmap function is the vma size, and this > is always one page at minimum. So, it's not possible to determine if > the user wants one 4k page or more. As I noted in my first response, > there is only one case where this is even possible and I don't think > it is a significant concern. > > I did notice that I left out the check to see if the user is trying to > map more than the device length, so I fixed that. Here's the revised > patch. Alright, I've reworked this now so that if we get one of these cases where there's a bsr that's > 4k and < 64k on a 64k kernel we'll only advertise that it is a 4k BSR to userspace. I think this is the best solution since user programs are only supposed to look at sysfs to determine how much can be mapped, and libbsr does this as well. Please consider for 2.6.31 as a fix, thanks. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:26 UTC |
| e4031d5 | Sonny Rao | 18 June 2009, 15:14:36 UTC | powerpc/BSR: add 4096 byte BSR size Add a 4096 byte BSR size which will be used on new machines. Also, remove the warning when we run into an unknown size, as this can spam the kernel log excessively. Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:26 UTC |
| 4a5cbf1 | Benjamin Herrenschmidt | 18 June 2009, 19:17:39 UTC | powerpc: Map more memory early on 601 processors The 32-bit kernel relies on some memory being mapped covering the kernel text,data and bss at least, early during boot before the full MMU setup is done. On 32-bit "classic" processors, this is done using BAT registers. On 601, the size of BATs is limited to 8M and we use 2 of them for that initial mapping. This can become quite tight when enabling features like lockdep, so let's use a 3rd one to bump that mapping from 16M to 24M. We keep the 4th BAT free as it can be useful for debugging early boot code to map things like serial ports. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:25 UTC |
| 3514141 | Benjamin Herrenschmidt | 18 June 2009, 19:20:51 UTC | powerpc/pmac: Fix DMA ops for MacIO devices The macio_dev's created to map devices inside the MacIO ASICs don't have proper dma_ops. This causes crashes on some machines since the SCSI code calls dma_map_* on our behalf using the device we hang from. This fixes it by copying the parent PCI device dma_ops into the macio_dev when creating it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:25 UTC |
| 850f6ac | Benjamin Herrenschmidt | 18 June 2009, 19:25:00 UTC | powerpc/mm: Make k(un)map_atomic out of line Those functions are way too big to be inline, besides, kmap_atomic() wants to call debug_kmap_atomic() which isn't exported for modules and causes module link failures. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:25 UTC |
| 85355bb | Kumar Gala | 18 June 2009, 22:01:20 UTC | powerpc: Fix mpic alloc warning Since we can use kmalloc earlier we are getting the following since the mpic_alloc() code calls alloc_bootmem(). Move to using kzalloc() to remove the warning. ------------[ cut here ]------------ Badness at c0583248 [verbose debug info unavailable] NIP: c0583248 LR: c0583210 CTR: 00000004 REGS: c0741de0 TRAP: 0700 Not tainted (2.6.30-06736-g12a31df) MSR: 00021000 <ME,CE> CR: 22024024 XER: 00000000 TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0 <6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000 <6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000 <6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0 <6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210 NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80 LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80 Call Trace: [c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable) [c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108 [c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50 [c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710 [c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8 [c0741f90] [c057633c] init_IRQ+0x24/0x34 [c0741fa0] [c05738b8] start_kernel+0x260/0x3dc [c0741ff0] [c00003c8] skpinv+0x2e0/0x31c Instruction dump: 409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8 39295700 80090004 7c000034 5400d97e <0f000000> 2f800000 409e001c 38800000 BenH: Changed to use GFP_KERNEL, the allocator will do the right thing Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:24 UTC |
| a236719 | Kumar Gala | 18 June 2009, 22:29:55 UTC | powerpc: Fix output from show_regs For some reason we've had an explicit KERN_INFO for GPR dumps. With recent changes we get output like: <6>GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff The KERN_INFO is causing the <6>. Don't see any reason to keep it around. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:24 UTC |
| 7ccbe50 | Benjamin Herrenschmidt | 18 June 2009, 23:30:07 UTC | powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP The old PowerSurge SMP (ie, dual or quad 604 machines) code has numerous issues in modern world. One is cpu_possible_map is set too late (the device-tree is bogus) so we fail to allocate the interrupt stacks and crash. Another problem is the fact the timebase is frozen by the bringup of the second CPU so the delays in the generic code will hang, we need to move some of the calling procedure to inside the powermac code. This makes it boot again for me Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:24 UTC |
| 6bb2ae5 | Gerhard Pircher | 19 June 2009, 11:42:36 UTC | powerpc/amigaone: Limit ISA I/O range to 4k in the device tree The kernel reserves the I/O address space from 0x0 to 0xfff for legacy ISA devices. Change the ranges property for the PCI2ISA bridge to match the kernels behavior, even if the ranges property isn't used for now. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:23 UTC |
| 3984114 | Sean MacLennan | 19 June 2009, 19:43:59 UTC | powerpc/warp: Platform fix for i2c change A change to the i2c subsystem breaks the warp platform code. The patch is cleaner anyway, the old way was a bit crufty. For those with keen eyes, the gratuitous change in the string from PIKA to Warp is just so the logs look a bit nicer. The following two lines tend to be printed one after another. Warp POST OK Warp DTM thread running. Yeah, this will be the third patch to warp.c submitted in this release.... Cheers, Sean The i2c_client struct changed, breaking the code that looked for the ad7414 chip. Use the new of_find_i2c_device_by_node function added in 2.6.29. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:23 UTC |
| b810c6e | Jon Smirl | 21 June 2009, 15:28:00 UTC | powerpc: Have git ignore generated files from dtc compile Have git ignore generated files from dtc compile Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:23 UTC |
| 5a2642f | Benjamin Herrenschmidt | 22 June 2009, 16:47:59 UTC | powerpc/mpic: Fix mapping of "DCR" based MPIC variants Commit 31207dab7d2e63795eb15823947bd2f7025b08e2 "Fix incorrect allocation of interrupt rev-map" introduced a regression crashing on boot on machines using a "DCR" based MPIC, such as the Cell blades. The reason is that the irq host data structure is initialized much later as a result of that patch, causing our calls to mpic_map() do be done before we have a host setup. Unfortunately, this breaks _mpic_map_dcr() which uses the mpic->irqhost to get to the device node. This fixes it by, instead, passing the device node explicitely to mpic_map(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> | 26 June 2009, 04:37:22 UTC |
| 6f0b1c6 | Michael Ellerman | 22 June 2009, 23:13:48 UTC | powerpc: Swiotlb breaks pseries Turning on SWIOTLB selects or enables PPC_NEED_DMA_SYNC_OPS, which means we get the non empty versions of dma_sync_* in asm/dma-mapping.h On my pseries machine the dma_ops have no such routines and we die with a null pointer - this patch gets it booting, is there a more elegant way to do it? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:22 UTC |
| 412af97 | Troy Moure | 25 June 2009, 23:05:35 UTC | ACPI: video: prevent NULL deref in acpi_get_pci_dev() ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468 When the ACPI video driver initializes, it does a namespace walk looking for for supported devices. When we find an appropriate handle, we walk up the ACPI tree looking for a PCI root bus, and then walk back down the PCI bus, assuming that every device inbetween is a P2P bridge. This assumption is not correct, and is reported broken on at least: Dell Latitude E6400 ThinkPad X61 Dell XPS M1330 Add a NULL deref check to prevent boot panics. Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: Troy Moure <twmoure@szypr.net> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:42 UTC |
| 3cd530b | Corentin Chary | 25 June 2009, 11:25:42 UTC | eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:41 UTC |
| dbfa3ba | Corentin Chary | 25 June 2009, 11:25:41 UTC | eeepc-laptop: get the right value for CMSG CMSG is an ACPI method used to find features available on an Eee PC. But some features are never repported, even if present. If the getter of a feature is present, this patch will set the corresponding bit in cmsg. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:41 UTC |
| f36509e | Corentin Chary | 25 June 2009, 11:25:40 UTC | eeepc-laptop: makes get_acpi() returns -ENODEV If there is there is no getter defined, get_acpi() will return -ENODEV. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:40 UTC |
| 1ddec2f | Corentin Chary | 25 June 2009, 11:25:39 UTC | eeepc-laptop: right parent device Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:40 UTC |
| 7de3938 | Corentin Chary | 25 June 2009, 11:25:38 UTC | eeepc-laptop: rfkill refactoring Refactor rfkill code, because we'll add another rfkill for wwan3g later. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:39 UTC |
| 19b5328 | Joe Perches | 25 June 2009, 11:25:37 UTC | eeepc-laptop.c: use pr_fmt and pr_<level> Convert the unusual printk(EEEPC_<level> uses to the more standard pr_fmt and pr_<level>(. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:39 UTC |
| 2b121bc | Corentin Chary | 25 June 2009, 11:25:36 UTC | eeepc-laptop: Register as a pci-hotplug device The eee contains a logically (but not physically) hotpluggable PCIe slot. Currently this is handled by adding or removing the PCI device in response to rfkill events, but if a user has forced pciehp to bind to it (with the force=1 argument) then both drivers will try to handle the event and hilarity (in the form of oopses) will ensue. This can be avoided by having eee-laptop register the slot as a hotplug slot. Only one of pciehp and eee-laptop will successfully register this, avoiding the problem. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Tested-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com> | 26 June 2009, 04:23:29 UTC |
| 71a394f | Steve French | 26 June 2009, 04:07:18 UTC | [CIFS] remove unknown mount option warning message Jeff's previous patch which removed the unneeded rw/ro parsing can cause a minor warning in dmesg (about the unknown rw or ro mount option) at mount time. This patch makes cifs ignore them in kernel to remove the warning (they are already handled in the mount helper and VFS). Signed-off-by: Steve French <sfrench@us.ibm.com> | 26 June 2009, 04:07:18 UTC |
| ad8034f | Steve French | 26 June 2009, 03:25:49 UTC | [CIFS] remove bkl usage from umount begin The lock_kernel call moved into the fs for umount_begin is not needed. This adds a check to make sure we don't call umount_begin twice on the same fs. umount_begin for cifs is probably not needed and may eventually be able to be removed, but in the meantime this smaller patch is safe and gets rid of the bkl from this path which provides some benefit. Acked-by: Jeff Layton <redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 26 June 2009, 03:25:49 UTC |
| 8944146 | Julian Calaby | 23 June 2009, 01:45:46 UTC | sparc32: Fix makefile not generating required files The tftpboot build was failing with missing file errors. It turns out that $(obj)/image wasn't being generated which was causing the a.out conversion to be skipped and hence piggyback to be called with nonexistent files. Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:56:02 UTC |
| 3e05c5e | Julian Calaby | 21 June 2009, 16:45:01 UTC | sparc32: Fix tftpboot.img Makefile Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:55:59 UTC |
| 52da82c | Sam Ravnborg | 21 June 2009, 16:46:10 UTC | sparc: fix tftpboot.img build Kjetil Oftedal mentioned that piggyback_32 was failing when building a sparc image. I tracked this down to the fact that the kernel no longer provided an absolute symbol named "end". Commit 86ed40bd6fe511d26bb8f3fa65a84cb65c235366 ("sparc: unify sections.h") renamed end to _end but failed to update piggyback_32. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Kjetil Oftedal <oftedal@gmail.com> Cc: Robert Reif <reif@earthlink.net> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:55:59 UTC |
| 22b096a | Robert Reif | 21 June 2009, 16:45:44 UTC | sparc32: Fix obvious build issues for tftpboot.img build. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:55:58 UTC |
| 413ee28 | Julian Calaby | 21 June 2009, 16:44:13 UTC | sparc64: Fix build warnings in piggyback_64.c This patch fixes the following build warnings: arch/sparc/boot/piggyback_64.c: In function 'main': arch/sparc/boot/piggyback_64.c:44: warning: 'end' may be used uninitialized in this function arch/sparc/boot/piggyback_64.c:44: warning: 'start' may be used uninitialized in this function Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:55:57 UTC |
| 14a2ff6 | David S. Miller | 26 June 2009, 02:00:47 UTC | sparc64: Don't use alloc_bootmem() in init_IRQ() code paths. The page allocator and SLAB are available at this point now, and if we still try to use bootmem allocations here the kernel spits out warnings. Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 02:00:47 UTC |
| 987fed3 | Linus Torvalds | 26 June 2009, 00:04:37 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (28 commits) drm: remove unused #include <linux/version.h>'s drm/radeon: fix driver initialization order so radeon kms can be builtin drm: Fix shifts which were miscalculated when converting from bitfields. drm/radeon: Clear surface registers at initialization time. drm/radeon: Don't initialize acceleration related fields of struct fb_info. drm/radeon: fix radeon kms framebuffer device drm/i915: initialize fence registers to zero when loading GEM drm/i915: Fix HDMI regression introduced in new chipset support drm/i915: fix LFP data fetch drm/i915: set TV detection mode when tv is already connected drm/i915: Catch up to obj_priv->page_list rename in disabled debug code. drm/i915: Fix size_t handling in off-by-default debug printfs drm/i915: Don't change the blank/sync width when calculating scaled modes drm/i915: Add support for changing LVDS panel fitting using an output property. drm/i915: correct suspend/resume ordering drm/i915: Add missing dependency on Intel AGP support. drm/i915: Generate 2MHz clock for display port aux channel I/O. Retry I/O. drm/i915: Clarify error returns from display port aux channel I/O drm/i915: Add CLKCFG register definition drm/i915: Split array of DAC limits into separate structures. ... | 26 June 2009, 00:04:37 UTC |
| 0f3bc09 | Suresh Jayaraman | 25 June 2009, 12:42:34 UTC | cifs: Fix incorrect return code being printed in cFYI messages FreeXid() along with freeing Xid does add a cifsFYI debug message that prints rc (return code) as well. In some code paths where we set/return error code after calling FreeXid(), incorrect error code is being printed when cifsFYI is enabled. This could be misleading in few cases. For eg. In cifs_open() if cifs_fill_filedata() returns a valid pointer to cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being returned. Fix this by setting rc before calling FreeXid(). Basically convert FreeXid(xid); rc = -ERR; return -ERR; => FreeXid(xid); return rc; [Note that Christoph would like to replace the GetXid/FreeXid calls, which are primarily used for debugging. This seems like a good longer term goal, but although there is an alternative tracing facility, there are no examples yet available that I know of that we can use (yet) to convert this cifs function entry/exit logging, and for creating an identifier that we can use to correlate all dmesg log entries for a particular vfs operation (ie identify all log entries for a particular vfs request to cifs: e.g. a particular close or read or write or byte range lock call ... and just using the thread id is harder). Eventually when a replacement for this is available (e.g. when NFS switches over and various samples to look at in other file systems) we can remove the GetXid/FreeXid macro but in the meantime multiple people use this run time configurable logging all the time for debugging, and Suresh's patch fixes a problem which made it harder to notice some low memory problems in the log so it is worthwhile to fix this problem until a better logging approach is able to be used] Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 19:12:57 UTC |
| ed4fc72 | Linus Torvalds | 25 June 2009, 18:25:00 UTC | Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: request only one page from get_user_pages() | 25 June 2009, 18:25:00 UTC |
| f4fa446 | Thadeu Lima de Souza Cascardo | 25 June 2009, 13:41:37 UTC | usb_serial: Fix oops when unexisting usb serial device is opened. This commit 335f8514f200e63d689113d29cb7253a5c282967 has stopped properly checking if there is any usb serial associated with the tty in the close function. It happens the close function is called by releasing the terminal right after opening the device fails. As an example, open fails with a non-existing device, when probe has never been called, because the device has never been plugged. This is common in systems with static modules and no udev. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:24:26 UTC |
| 922b135 | Thadeu Lima de Souza Cascardo | 25 June 2009, 13:41:30 UTC | acm: Fix oops when closing ACM tty device right after open has failed. This commit 10077d4a6674f535abdbe25cdecb1202af7948f1 has stopped checking if there was a valid acm device associated to the tty, which is not true right after open fails and tty subsystem tries to close the device. As an example, open fails with a non-existing device, when probe has never been called, because the device has never been plugged. This is common in systems with static modules and no udev. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:24:26 UTC |
| 42dd2aa | Thadeu Lima de Souza Cascardo | 25 June 2009, 13:41:24 UTC | acm: Return ENODEV instead of EINVAL when trying to open ACM device. This is required, otherwise a user will get a EINVAL while opening a non-existing device, instead of ENODEV. This is what I get with this patch applied now instead of an "Invalid argument". cascardo@vespa:~$ cat /dev/ttyACM0 cat: /dev/ttyACM0: No such device cascardo@vespa:~$ Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:24:26 UTC |
| a37f6b8 | Linus Torvalds | 25 June 2009, 18:23:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide cs5520: Initialize second port's interrupt number. ide: improve handling of Power Management requests ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[] ide: relax DMA info validity checking ide-cd: Improve "weird block size" error message ide-cd: Don't warn on bogus block size unless it actually matters. ide: fix handling of unexpected IRQs vs request_irq() | 25 June 2009, 18:23:37 UTC |
| 9d73777 | Peter Zijlstra | 25 June 2009, 09:58:55 UTC | clarify get_user_pages() prototype Currently the 4th parameter of get_user_pages() is called len, but its in pages, not bytes. Rename the thing to nr_pages to avoid future confusion. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:22:13 UTC |
| ab420e6 | Paul Menage | 25 June 2009, 07:17:15 UTC | UML: Fix some apparent bitrot UML: Fix some apparent bitrot - migration of net_device methods into net_device_ops - dma_sync_single() changes Signed-off-by: Paul Menage <menage@google.com> Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com> -- This version is split from my earlier patch, including just the portions that ar required for Linus' tree. Fixes the following compile errors: include/linux/dma-mapping.h:113: error: redefinition of 'dma_sync_single' arch/um/include/asm/dma-mapping.h:84: error: previous definition of 'dma_sync_single' was here include/linux/dma-mapping.h: In function 'dma_sync_single': include/linux/dma-mapping.h:117: error: implicit declaration of function 'dma_sync_single_for_cpu' include/linux/dma-mapping.h: At top level: include/linux/dma-mapping.h:120: error: redefinition of 'dma_sync_sg' arch/um/include/asm/dma-mapping.h:91: error: previous definition of 'dma_sync_sg' was here include/linux/dma-mapping.h: In function 'dma_sync_sg': include/linux/dma-mapping.h:124: error: implicit declaration of function 'dma_sync_sg_for_cpu' arch/um/drivers/slirp_kern.c: In function 'slirp_init': arch/um/drivers/slirp_kern.c:35: error: 'struct net_device' has no member named 'init' Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:22:13 UTC |
| 47749b1 | Ingo Molnar | 25 June 2009, 06:27:14 UTC | i2c: fix build bug in i2c-designware.c This build error triggers on x86: drivers/built-in.o: In function `i2c_dw_init': i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate' drivers/built-in.o: In function `dw_i2c_probe': i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put' Because this new driver uses the clk_*() facilities which is an ARM-only thing currently. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 June 2009, 18:22:12 UTC |
| aa71528 | Thomas Gleixner | 25 June 2009, 12:27:58 UTC | futex: request only one page from get_user_pages() Yanmin noticed that fault_in_user_writeable() requests 4 pages instead of one. That's the result of blindly trusting Linus' proposal :) I even looked up the prototype to verify the correctness: the argument in question is confusingly enough named "len" while in reality it means number of pages. Pointed-out-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 25 June 2009, 12:33:46 UTC |
| f46c723 | Steve French | 25 June 2009, 03:04:20 UTC | [CIFS] cleanup asn handling for ntlmssp Also removes obsolete distinction between rawntlmssp and ntlmssp (in asn/SPNEGO) since as jra noted we can always send raw ntlmssp in session setup now. remove check for experimental runtime flag (/proc/fs/cifs/Experimental) in ntlmssp path. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 03:07:48 UTC |
| 6debdbc | Simo Leone | 25 June 2009, 02:44:43 UTC | [CIFS] Copy struct *after* setting the port, instead of before. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Simo Leone <simo@archlinux.org> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 02:44:43 UTC |
| 6459340 | Jeff Layton | 25 June 2009, 04:56:55 UTC | cifs: remove rw/ro options cifs: remove rw/ro options These options are handled at the VFS layer. They only ever set the option in the smb_vol struct. Nothing was ever done with them afterward anyway. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 02:33:01 UTC |
| b48a485 | Jeff Layton | 25 June 2009, 04:56:54 UTC | cifs: fix problems with earlier patches cifs: fix problems with earlier patches cifs_show_address hasn't been introduced yet, and fix a typo that was silently fixed by a later patch in the series. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 02:32:57 UTC |
| 681bf72 | Jeff Layton | 11 June 2009, 14:27:31 UTC | cifs: have cifs parse scope_id out of IPv6 addresses and use it This patch has CIFS look for a '%' in an IPv6 address. If one is present then it will try to treat that value as a numeric interface index suitable for stuffing into the sin6_scope_id field. This should allow people to mount servers on IPv6 link-local addresses. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: David Holder <david@erion.co.uk> Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 01:14:36 UTC |
| 268875b | Steve French | 25 June 2009, 00:29:21 UTC | [CIFS] Do not send tree disconnect if session is already disconnected Noticed this when tree connect timed out (due to Samba server crash) - we try to send a tree disconnect for a tid that does not exist since we don't have a valid tree id yet. This checks that the session is valid before sending the tree disconnect to handle this case. Signed-off-by: Steve French <sfrench@us.ibm.com> | 25 June 2009, 00:29:21 UTC |
| 28d0325 | Linus Torvalds | 24 June 2009, 23:25:37 UTC | Linux 2.6.31-rc1 | 24 June 2009, 23:25:37 UTC |
| 236e946 | Linus Torvalds | 24 June 2009, 23:23:03 UTC | Revert "PCI: use ACPI _CRS data by default" This reverts commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b. Quoting from the commit message: "At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble." And guess what? The _CRS code causes trouble. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 23:23:03 UTC |
| f27884a | Linus Torvalds | 24 June 2009, 21:35:57 UTC | Merge git://git.infradead.org/battery-2.6 * git://git.infradead.org/battery-2.6: da9030_battery: Fix race between event handler and monitor Add MAX17040 Fuel Gauge driver w1: ds2760_battery: add support for sleep mode feature w1: ds2760: add support for EEPROM read and write ds2760_battery: cleanups in ds2760_battery_probe() | 24 June 2009, 21:35:57 UTC |
| c622304 | Linus Torvalds | 24 June 2009, 21:17:14 UTC | Merge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: another race fix in jfs_check_acl() Get "no acls for this inode" right, fix shmem breakage inline functions left without protection of ifdef (acl) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL | 24 June 2009, 21:17:14 UTC |
| d5bb68a | Al Viro | 24 June 2009, 21:02:42 UTC | another race fix in jfs_check_acl() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 June 2009, 21:02:42 UTC |
| 72c0490 | Al Viro | 24 June 2009, 20:58:48 UTC | Get "no acls for this inode" right, fix shmem breakage Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 June 2009, 20:58:48 UTC |
| 3a6a6c1 | Eric Paris | 24 June 2009, 20:09:01 UTC | audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL Even though one cannot make use of the audit watch code without CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that the audit rule filtering requires that it at least be compiled. Thus build the audit_watch code when we build auditfilter like it was before cfcad62c74abfef83762dc05a556d21bdf3980a2 Clearly this is a point of potential future cleanup.. Reported-by: Frans Pop <elendil@planet.nl> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 June 2009, 20:42:05 UTC |
| 641cf4a | Markus Trippelsdorf | 24 June 2009, 20:28:52 UTC | inline functions left without protection of ifdef (acl) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 24 June 2009, 20:34:50 UTC |
| bd453cd | Linus Torvalds | 24 June 2009, 20:33:19 UTC | Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix the write access fault problem for real | 24 June 2009, 20:33:19 UTC |
| d072599 | Thomas Gleixner | 11 June 2009, 21:15:43 UTC | futex: Fix the write access fault problem for real commit 64d1304a64 (futex: setup writeable mapping for futex ops which modify user space data) did address only half of the problem of write access faults. The patch was made on two wrong assumptions: 1) access_ok(VERIFY_WRITE,...) would actually check write access. On x86 it does _NOT_. It's a pure address range check. 2) a RW mapped region can not go away under us. That's wrong as well. Nobody can prevent another thread to call mprotect(PROT_READ) on that region where the futex resides. If that call hits between the get_user_pages_fast() verification and the actual write access in the atomic region we are toast again. The solution is to not rely on access_ok and get_user() for any write access related fault on private and shared futexes. Instead we need to fault it in with verification of write access. There is no generic non destructive write mechanism which would fault the user page in trough a #PF, but as we already know that we will fault we can as well call get_user_pages() directly and avoid the #PF overhead. If get_user_pages() returns -EFAULT we know that we can not fix it anymore and need to bail out to user space. Remove a bunch of confusing comments on this issue as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org | 24 June 2009, 19:27:35 UTC |
| ba52270 | Pekka Enberg | 24 June 2009, 18:59:51 UTC | SLUB: Don't pass __GFP_FAIL for the initial allocation SLUB uses higher order allocations by default but falls back to small orders under memory pressure. Make sure the GFP mask used in the initial allocation doesn't include __GFP_NOFAIL. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 19:20:14 UTC |
| 4923abf | Linus Torvalds | 24 June 2009, 19:16:49 UTC | Don't warn about order-1 allocations with __GFP_NOFAIL Traditionally, we never failed small orders (even regardless of any __GFP_NOFAIL flags), and slab will allocate order-1 allocations even for small allocations that could fit in a single page (in order to avoid excessive fragmentation). Maybe we should remove this warning entirely, but before making that judgement, at least limit it to bigger allocations. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 19:16:49 UTC |
| c82e6d4 | Linus Torvalds | 24 June 2009, 17:47:38 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: Staging: octeon-ethernet: Fix race freeing transmit buffers. Staging: octeon-ethernet: Convert to use net_device_ops. MIPS: Cavium: Add CPU hotplugging code. MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available MIPS: Add arch generic CPU hotplug DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined. MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined. MIPS: Hibernation: Remove SMP TLB and cacheflushing code. MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users. MIPS: bug.h Build fix - include <linux/compiler.h>. | 24 June 2009, 17:47:38 UTC |
| a620c16 | David Daney | 23 June 2009, 23:20:56 UTC | Staging: octeon-ethernet: Fix race freeing transmit buffers. The existing code had the following race: Thread-1 Thread-2 inc/read in_use inc/read in_use inc tx_free_list[qos].len inc tx_free_list[qos].len The actual in_use value was incremented twice, but thread-1 is going to free memory based on its stale value, and will free one too many times. The result is that memory is freed back to the kernel while its packet is still in the transmit buffer. If the memory is overwritten before it is transmitted, the hardware will put a valid checksum on it and send it out (just like it does with good packets). If by chance the TCP flags are clobbered but not the addresses or ports, the result can be a broken TCP stream. The fix is to track the number of freed packets in a single location (a Fetch-and-Add Unit register). That way it can never get out of sync with itself. We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time. If fewer are available we adjust the free count with the difference. The action of claiming buffers to free is atomic so two threads cannot claim the same buffers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:41 UTC |
| f696a10 | David Daney | 23 June 2009, 18:34:08 UTC | Staging: octeon-ethernet: Convert to use net_device_ops. Convert the driver to use net_device_ops as it is now mandatory. Also compensate for the removal of struct sk_buff's dst field. The changes are mostly mechanical, the content of ethernet-common.c was moved to ethernet.c and ethernet-common.{c,h} are removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:41 UTC |
| 773cb77 | Ralf Baechle | 23 June 2009, 09:36:38 UTC | MIPS: Cavium: Add CPU hotplugging code. Thanks to Cavium Inc. for the code contribution and help. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:40 UTC |
| 9801b32 | Ralf Baechle | 23 June 2009, 09:20:56 UTC | MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available The SMP implementation of suspend and hibernate depends on CPU hotplugging. In the past we didn't have CPU hotplug so suspend and hibernation were not possible on SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:40 UTC |
| 1b2bc75 | Ralf Baechle | 23 June 2009, 09:00:31 UTC | MIPS: Add arch generic CPU hotplug Each platform has to add support for CPU hotplugging itself by providing suitable definitions for the cpu_disable and cpu_die of the smp_ops methods and setting SYS_SUPPORTS_HOTPLUG_CPU. A platform should only set SYS_SUPPORTS_HOTPLUG_CPU once all it's smp_ops definitions have the necessary changes. This patch contains the changes to the dummy smp_ops definition for uni-processor systems. Parts of the code contributed by Cavium Inc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:40 UTC |
| 4ac4aa5 | Atsushi Nemoto | 17 June 2009, 20:08:31 UTC | DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set This patch does not change actual behaviour since dma_unmap_page is just an alias of dma_unmap_single on MIPS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:40 UTC |
| 2e25406 | Ralf Baechle | 22 June 2009, 15:17:52 UTC | MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined. This fixes kernel.org bugzilla 13596, see http://bugzilla.kernel.org/show_bug.cgi?id=13596 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:39 UTC |
| ab7f6f3 | Ralf Baechle | 22 June 2009, 14:48:27 UTC | MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined. This fixes kernel.org bugzilla 13595, see http://bugzilla.kernel.org/show_bug.cgi?id=13595 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:39 UTC |
| 44eeab6 | Ralf Baechle | 19 June 2009, 14:01:44 UTC | MIPS: Hibernation: Remove SMP TLB and cacheflushing code. We can't perform any flushes on SMP from swsusp_arch_resume because interrupts are disabled. A cross-CPU flush is unnecessary anyway because all but the local CPU have already been disabled. A local flush is not needed either because we didn't change any mappings. So just delete the code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:39 UTC |
| 631330f | Ralf Baechle | 19 June 2009, 13:05:26 UTC | MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users. Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:39 UTC |
| 0ca5921 | Ralf Baechle | 19 June 2009, 12:51:28 UTC | MIPS: bug.h Build fix - include <linux/compiler.h>. In the past this file somehow used to be dragged in. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 24 June 2009, 17:34:38 UTC |
| c3cb5e1 | Linus Torvalds | 24 June 2009, 17:26:54 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (48 commits) dm mpath: change to be request based dm: disable interrupt when taking map_lock dm: do not set QUEUE_ORDERED_DRAIN if request based dm: enable request based option dm: prepare for request based option dm raid1: add userspace log dm: calculate queue limits during resume not load dm log: fix create_log_context to use logical_block_size of log device dm target:s introduce iterate devices fn dm table: establish queue limits by copying table limits dm table: replace struct io_restrictions with struct queue_limits dm table: validate device logical_block_size dm table: ensure targets are aligned to logical_block_size dm ioctl: support cookies for udev dm: sysfs add suspended attribute dm table: improve warning message when devices not freed before destruction dm mpath: add service time load balancer dm mpath: add queue length load balancer dm mpath: add start_io and nr_bytes to path selectors dm snapshot: use barrier when writing exception store ... | 24 June 2009, 17:26:54 UTC |
| ea94b50 | Linus Torvalds | 24 June 2009, 17:26:24 UTC | Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: allow WLP to be used with IPv6. uwb: event_size should be signed | 24 June 2009, 17:26:24 UTC |
| 650a10d | Linus Torvalds | 24 June 2009, 17:22:57 UTC | Merge branch 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: Fix rule eviction order for AUDIT_DIR Audit: clean up all op= output to include string quoting Audit: move audit_get_nd completely into audit_watch audit: seperate audit inode watches into a subfile Audit: clean up audit_receive_skb Audit: cleanup netlink mesg handling Audit: unify the printk of an skb when auditd not around Audit: dereferencing krule as if it were an audit_watch Audit: better estimation of execve record length Audit: fix audit watch use after free | 24 June 2009, 17:22:57 UTC |
| 9937ac0 | Jesper Nilsson | 24 June 2009, 07:33:19 UTC | MAINTAINERS: Change mailing list info for CRIS Posting to the dev-etrax mailing list is only allowed for subscribers, and the list is more geared toward user applications than kernel developers. Change to newly created mailing list for CRIS. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 17:22:26 UTC |
| 0c26d7c | Linus Torvalds | 24 June 2009, 17:17:07 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (72 commits) asus-laptop: remove EXPERIMENTAL dependency asus-laptop: use pr_fmt and pr_<level> eeepc-laptop: cpufv updates eeepc-laptop: sync eeepc-laptop with asus_acpi asus_acpi: Deprecate in favor of asus-laptop acpi4asus: update MAINTAINER and KConfig links asus-laptop: platform dev as parent for led and backlight eeepc-laptop: enable camera by default ACPI: Rename ACPI processor device bus ID acerhdf: Acer Aspire One fan control ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness ACPI: run ACPI device hot removal in kacpi_hotplug_wq ACPI: Add the reference count to avoid unloading ACPI video bus twice ACPI: DMI to disable Vista compatibility on some Sony laptops ACPI: fix a deadlock in hotplug case Show the physical device node of backlight class device. ACPI: pdc init related memory leak with physical CPU hotplug ACPI: pci_root: remove unused dev/fn information ACPI: pci_root: simplify list traversals ACPI: pci_root: use driver data rather than list lookup ... | 24 June 2009, 17:17:07 UTC |
| 936940a | Linus Torvalds | 24 June 2009, 17:03:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (23 commits) switch xfs to generic acl caching helpers helpers for acl caching + switch to those switch shmem to inode->i_acl switch reiserfs to inode->i_acl switch reiserfs to usual conventions for caching ACLs reiserfs: minimal fix for ACL caching switch nilfs2 to inode->i_acl switch btrfs to inode->i_acl switch jffs2 to inode->i_acl switch jfs to inode->i_acl switch ext4 to inode->i_acl switch ext3 to inode->i_acl switch ext2 to inode->i_acl add caching of ACLs in struct inode fs: Add new pre-allocation ioctls to vfs for compatibility with legacy xfs ioctls cleanup __writeback_single_inode ... and the same for vfsmount id/mount group id Make allocation of anon devices cheaper update Documentation/filesystems/Locking devpts: remove module-related code ... | 24 June 2009, 17:03:12 UTC |
| 09ce42d | Linus Torvalds | 24 June 2009, 17:01:12 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: bnx2: Fix the behavior of ethtool when ONBOOT=no qla3xxx: Don't sleep while holding lock. qla3xxx: Give the PHY time to come out of reset. ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off net: Move rx skb_orphan call to where needed ipv6: Use correct data types for ICMPv6 type and code net: let KS8842 driver depend on HAS_IOMEM can: let SJA1000 driver depend on HAS_IOMEM netxen: fix firmware init handshake netxen: fix build with without CONFIG_PM netfilter: xt_rateest: fix comparison with self netfilter: xt_quota: fix incomplete initialization netfilter: nf_log: fix direct userspace memory access in proc handler netfilter: fix some sparse endianess warnings netfilter: nf_conntrack: fix conntrack lookup race netfilter: nf_conntrack: fix confirmation race condition netfilter: nf_conntrack: death_by_timeout() fix | 24 June 2009, 17:01:12 UTC |
| d7ed9c0 | Linus Torvalds | 24 June 2009, 16:57:10 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: remove redundant tests on unsigned udf: Use device size when drive reported bogus number of written blocks | 24 June 2009, 16:57:10 UTC |
| 4d8d4d2 | Chuck Ebbert | 24 June 2009, 17:35:13 UTC | Remove low_latency flag setting from nozomi and mxser drivers The kernel oopses if this flag is set. [and neither driver should set it as they call tty_flip_buffer_push from IRQ paths so have always been buggy] Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 16:55:50 UTC |
| 6af9a43 | Jiri Slaby | 24 June 2009, 17:35:05 UTC | tty: fix tty_port_block_til_ready waiting Since commit 3e3b5c087799e536871c8261b05bc28e4783c8da ("tty: use prepare/finish_wait"), tty_port_block_til_ready() is using prepare_to_wait()/finish_wait(). Those functions require that the wait_queue_t be initialised with .func=autoremove_wake_function, via DEFINE_WAIT(). But the conversion from DECLARE_WAITQUEUE() to DEFINE_WAIT() was not made, so this code will oops in finish_wait(). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 16:55:50 UTC |
| 24ed3ab | Arjan van de Ven | 24 June 2009, 17:34:58 UTC | pci: use pci_ioremap_bar() in drivers/serial Use the newly introduced pci_ioremap_bar() function in drivers/serial. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 June 2009, 16:55:50 UTC |
