Skip to main content

Browse the archive

Revision 2b6c53b1504865728a6dfad3e720918a2f89f3a5 authored by Jon Medhurst (Tixy) on 20 August 2014, 12:41:04 UTC, committed by Tomi Valkeinen on 26 August 2014, 09:50:27 UTC 
video: ARM CLCD: Fix calculation of bits-per-pixel
 
If the device-tree specifies a max-memory-bandwidth property then the
CLCD driver uses that to calculate the bits-per-pixel supported,
however, this calculation is faulty for two reasons.

1. It doesn't ensure that the result is a sane value, i.e. a power of 2
   and <= 32 as the rest of the code assumes.

2. It uses the displayed resolution and calculates the average bandwidth
   across the whole frame. It should instead calculate the peak
   bandwidth based on the pixel clock.

This patch fixes both the above.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
1 parent 754d561
Raw File
ripemd.h 
/*
 * Common values for RIPEMD algorithms
 */

#ifndef _CRYPTO_RMD_H
#define _CRYPTO_RMD_H

#define RMD128_DIGEST_SIZE      16
#define RMD128_BLOCK_SIZE       64

#define RMD160_DIGEST_SIZE      20
#define RMD160_BLOCK_SIZE       64

#define RMD256_DIGEST_SIZE      32
#define RMD256_BLOCK_SIZE       64

#define RMD320_DIGEST_SIZE      40
#define RMD320_BLOCK_SIZE       64

/* initial values  */
#define RMD_H0  0x67452301UL
#define RMD_H1  0xefcdab89UL
#define RMD_H2  0x98badcfeUL
#define RMD_H3  0x10325476UL
#define RMD_H4  0xc3d2e1f0UL
#define RMD_H5  0x76543210UL
#define RMD_H6  0xfedcba98UL
#define RMD_H7  0x89abcdefUL
#define RMD_H8  0x01234567UL
#define RMD_H9  0x3c2d1e0fUL

/* constants */
#define RMD_K1  0x00000000UL
#define RMD_K2  0x5a827999UL
#define RMD_K3  0x6ed9eba1UL
#define RMD_K4  0x8f1bbcdcUL
#define RMD_K5  0xa953fd4eUL
#define RMD_K6  0x50a28be6UL
#define RMD_K7  0x5c4dd124UL
#define RMD_K8  0x6d703ef3UL
#define RMD_K9  0x7a6d76e9UL

#endif
back to top