https://github.com/torvalds/linux
Revision 2da94e2808bd7df30ace134991ed0fbd95188acd authored by Wesley Chalmers on 07 December 2020, 16:46:08 UTC, committed by Alex Deucher on 23 December 2020, 20:01:24 UTC
[WHY] HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank and also toggle HUBP_DISABLE, which should instead be called HUBP_SOFT_RESET for what it does in HW. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1 parent ea96b12
Tip revision: 2da94e2808bd7df30ace134991ed0fbd95188acd authored by Wesley Chalmers on 07 December 2020, 16:46:08 UTC
drm/amd/display: Interfaces for hubp blank and soft reset
drm/amd/display: Interfaces for hubp blank and soft reset
Tip revision: 2da94e2
Kconfig.bus
# SPDX-License-Identifier: GPL-2.0
if MMU
comment "Bus Support"
config DIO
bool "DIO bus support"
depends on HP300
default y
help
Say Y here to enable support for the "DIO" expansion bus used in
HP300 machines. If you are using such a system you almost certainly
want this.
config NUBUS
bool
depends on MAC
default y
config ZORRO
bool "Amiga Zorro (AutoConfig) bus support"
depends on AMIGA
help
This enables support for the Zorro bus in the Amiga. If you have
expansion cards in your Amiga that conform to the Amiga
AutoConfig(tm) specification, say Y, otherwise N. Note that even
expansion cards that do not fit in the Zorro slots but fit in e.g.
the CPU slot may fall in this category, so you have to say Y to let
Linux use these.
config AMIGA_PCMCIA
bool "Amiga 1200/600 PCMCIA support"
depends on AMIGA
help
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
config ISA
bool
depends on Q40 || AMIGA_PCMCIA
default y
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config ATARI_ROM_ISA
bool "Atari ROM port ISA adapter support"
depends on ATARI
help
This option enables support for the ROM port ISA adapter used to
operate ISA cards on Atari. Only 8 bit cards are supported, and
no interrupt lines are connected.
The only driver currently using this adapter is the EtherNEC
driver for RTL8019AS based NE2000 compatible network cards.
config GENERIC_ISA_DMA
def_bool ISA
source "drivers/zorro/Kconfig"
endif
if !MMU
config ISA_DMA_API
def_bool !M5272
endif
Computing file changes ...