| 2ee2779 | Hans de Goede | 30 December 2018, 17:27:15 UTC | x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority The "ENERGY_PERF_BIAS: Set to 'normal', was 'performance'" message triggers on pretty much every Intel machine. The purpose of log messages with a warning level is to notify the user of something which potentially is a problem, or at least somewhat unexpected. This message clearly does not match those criteria, so lower its log priority from warning to info. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181230172715.17469-1-hdegoede@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 19 April 2019, 17:23:13 UTC |
| 1de7edb | Andi Kleen | 30 March 2019, 00:47:43 UTC | x86/cpu/bugs: Use __initconst for 'const' init data Some of the recently added const tables use __initdata which causes section attribute conflicts. Use __initconst instead. Fixes: fa1202ef2243 ("x86/speculation: Add command line control") Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.org | 19 April 2019, 15:11:39 UTC |
| ec39371 | Baoquan He | 04 April 2019, 02:03:13 UTC | x86/mm/KASLR: Fix the size of the direct mapping section kernel_randomize_memory() uses __PHYSICAL_MASK_SHIFT to calculate the maximum amount of system RAM supported. The size of the direct mapping section is obtained from the smaller one of the below two values: (actual system RAM size + padding size) vs (max system RAM size supported) This calculation is wrong since commit b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52"). In it, __PHYSICAL_MASK_SHIFT was changed to be 52, regardless of whether the kernel is using 4-level or 5-level page tables. Thus, it will always use 4 PB as the maximum amount of system RAM, even in 4-level paging mode where it should actually be 64 TB. Thus, the size of the direct mapping section will always be the sum of the actual system RAM size plus the padding size. Even when the amount of system RAM is 64 TB, the following layout will still be used. Obviously KALSR will be weakened significantly. |____|_______actual RAM_______|_padding_|______the rest_______| 0 64TB ~120TB Instead, it should be like this: |____|_______actual RAM_______|_________the rest______________| 0 64TB ~120TB The size of padding region is controlled by CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING, which is 10 TB by default. The above issue only exists when CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING is set to a non-zero value, which is the case when CONFIG_MEMORY_HOTPLUG is enabled. Otherwise, using __PHYSICAL_MASK_SHIFT doesn't affect KASLR. Fix it by replacing __PHYSICAL_MASK_SHIFT with MAX_PHYSMEM_BITS. [ bp: Massage commit message. ] Fixes: b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Garnier <thgarnie@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: frank.ramsay@hpe.com Cc: herbert@gondor.apana.org.au Cc: kirill@shutemov.name Cc: mike.travis@hpe.com Cc: thgarnie@google.com Cc: x86-ml <x86@kernel.org> Cc: yamada.masahiro@socionext.com Link: https://lkml.kernel.org/r/20190417083536.GE7065@MiWiFi-R3L-srv | 18 April 2019, 08:42:58 UTC |
| a943245 | Colin Ian King | 16 April 2019, 10:57:51 UTC | x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness" The Kconfig text contains a spelling mistake, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/20190416105751.18899-1-colin.king@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2019, 11:27:34 UTC |
| 780e010 | Peter Zijlstra | 16 April 2019, 08:03:35 UTC | x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info" Revert the following commit: 515ab7c41306: ("x86/mm: Align TLB invalidation info") I found out (the hard way) that under some .config options (notably L1_CACHE_SHIFT=7) and compiler combinations this on-stack alignment leads to a 320 byte stack usage, which then triggers a KASAN stack warning elsewhere. Using 320 bytes of stack space for a 40 byte structure is ludicrous and clearly not right. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Nadav Amit <namit@vmware.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 515ab7c41306 ("x86/mm: Align TLB invalidation info") Link: http://lkml.kernel.org/r/20190416080335.GM7905@worktop.programming.kicks-ass.net [ Minor changelog edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2019, 08:10:13 UTC |
| 0082517 | Jian-Hong Pan | 12 April 2019, 08:01:53 UTC | x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the shutdown process, but then it hangs in BIOS POST with a black screen. The problem is intermittent - at some points it has appeared related to Secure Boot settings or different kernel builds, but ultimately we have not been able to identify the exact conditions that trigger the issue to come and go. Besides, the EFI mode cannot be disabled in the BIOS of this model. However, after extensive testing, we observe that using the EFI reboot method reliably avoids the issue in all cases. So add a boot time quirk to use EFI reboot on such systems. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux@endlessm.com Link: http://lkml.kernel.org/r/20190412080152.3718-1-jian-hong@endlessm.com [ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2019, 08:01:24 UTC |
| 510bb96 | Thomas Gleixner | 15 April 2019, 08:46:07 UTC | x86/mm: Prevent bogus warnings with "noexec=off" Xose Vazquez Perez reported boot warnings when NX is disabled on the kernel command line. __early_set_fixmap() triggers this warning: attempted to set unsupported pgprot: 8000000000000163 bits: 8000000000000000 supported: 7fffffffffffffff WARNING: CPU: 0 PID: 0 at arch/x86/include/asm/pgtable.h:537 __early_set_fixmap+0xa2/0xff because it uses __default_kernel_pte_mask to mask out unsupported bits. Use __supported_pte_mask instead. Disabling NX on the command line also triggers the NX warning in the page table mapping check: WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:262 note_page+0x2ae/0x650 .... Make the warning depend on NX set in __supported_pte_mask. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Tested-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1904151037530.1729@nanos.tec.linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2019, 07:42:10 UTC |
| 6a03469 | Sami Tolvanen | 15 April 2019, 16:49:56 UTC | x86/build/lto: Fix truncated .bss with -fdata-sections With CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y, we compile the kernel with -fdata-sections, which also splits the .bss section. The new section, with a new .bss.* name, which pattern gets missed by the main x86 linker script which only expects the '.bss' name. This results in the discarding of the second part and a too small, truncated .bss section and an unhappy, non-working kernel. Use the common BSS_MAIN macro in the linker script to properly capture and merge all the generated BSS sections. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190415164956.124067-1-samitolvanen@google.com [ Extended the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2019, 06:20:55 UTC |
| 2f5fb19 | Thomas Gleixner | 14 April 2019, 17:51:06 UTC | x86/speculation: Prevent deadlock on ssb_state::lock Mikhail reported a lockdep splat related to the AMD specific ssb_state lock: CPU0 CPU1 lock(&st->lock); local_irq_disable(); lock(&(&sighand->siglock)->rlock); lock(&st->lock); <Interrupt> lock(&(&sighand->siglock)->rlock); *** DEADLOCK *** The connection between sighand->siglock and st->lock comes through seccomp, which takes st->lock while holding sighand->siglock. Make sure interrupts are disabled when __speculation_ctrl_update() is invoked via prctl() -> speculation_ctrl_update(). Add a lockdep assert to catch future offenders. Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1904141948200.4917@nanos.tec.linutronix.de | 14 April 2019, 21:05:52 UTC |
| 40fba00 | Xiaochen Shen | 09 April 2019, 19:53:49 UTC | x86/resctrl: Do not repeat rdtgroup mode initialization When cache allocation is supported and the user creates a new resctrl resource group, the allocations of the new resource group are initialized to all regions that it can possibly use. At this time these regions are all that are shareable by other resource groups as well as regions that are not currently used. The new resource group's mode is also initialized to reflect this initialization and set to "shareable". The new resource group's mode is currently repeatedly initialized within the loop that configures the hardware with the resource group's default allocations. Move the initialization of the resource group's mode outside the hardware configuration loop. The resource group's mode is now initialized only once as the final step to reflect that its configured allocations are "shareable". Fixes: 95f0b77efa57 ("x86/intel_rdt: Initialize new resource group with sane defaults") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1554839629-5448-1-git-send-email-xiaochen.shen@intel.com | 14 April 2019, 16:23:13 UTC |
| 5b77e95 | Alexander Potapenko | 02 April 2019, 11:28:13 UTC | x86/asm: Use stricter assembly constraints in bitops There's a number of problems with how arch/x86/include/asm/bitops.h is currently using assembly constraints for the memory region bitops are modifying: 1) Use memory clobber in bitops that touch arbitrary memory Certain bit operations that read/write bits take a base pointer and an arbitrarily large offset to address the bit relative to that base. Inline assembly constraints aren't expressive enough to tell the compiler that the assembly directive is going to touch a specific memory location of unknown size, therefore we have to use the "memory" clobber to indicate that the assembly is going to access memory locations other than those listed in the inputs/outputs. To indicate that BTR/BTS instructions don't necessarily touch the first sizeof(long) bytes of the argument, we also move the address to assembly inputs. This particular change leads to size increase of 124 kernel functions in a defconfig build. For some of them the diff is in NOP operations, other end up re-reading values from memory and may potentially slow down the execution. But without these clobbers the compiler is free to cache the contents of the bitmaps and use them as if they weren't changed by the inline assembly. 2) Use byte-sized arguments for operations touching single bytes. Passing a long value to ANDB/ORB/XORB instructions makes the compiler treat sizeof(long) bytes as being clobbered, which isn't the case. This may theoretically lead to worse code in the case of heavy optimization. Practical impact: I've built a defconfig kernel and looked through some of the functions generated by GCC 7.3.0 with and without this clobber, and didn't spot any miscompilations. However there is a (trivial) theoretical case where this code leads to miscompilation: https://lkml.org/lkml/2019/3/28/393 using just GCC 8.3.0 with -O2. It isn't hard to imagine someone writes such a function in the kernel someday. So the primary motivation is to fix an existing misuse of the asm directive, which happens to work in certain configurations now, but isn't guaranteed to work under different circumstances. [ --mingo: Added -stable tag because defconfig only builds a fraction of the kernel and the trivial testcase looks normal enough to be used in existing or in-development code. ] Signed-off-by: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: James Y Knight <jyknight@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190402112813.193378-1-glider@google.com [ Edited the changelog, tidied up one of the defines. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 06 April 2019, 07:52:02 UTC |
| faa3604 | Xiaochen Shen | 29 March 2019, 21:50:38 UTC | x86/resctrl: Fix typos in the mba_sc mount option The user can control the MBA memory bandwidth in MBps (Mega Bytes per second) units of the MBA Software Controller (mba_sc) by using the "mba_MBps" mount option. For details, see Documentation/x86/resctrl_ui.txt. However, commit 23bf1b6be9c2 ("kernfs, sysfs, cgroup, intel_rdt: Support fs_context") changed the mount option name from "mba_MBps" to "mba_mpbs" by mistake. Change it back from to "mba_MBps" because it is user-visible, and correct "Opt_mba_mpbs" spelling to "Opt_mba_mbps". [ bp: massage commit message. ] Fixes: 23bf1b6be9c2 ("kernfs, sysfs, cgroup, intel_rdt: Support fs_context") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: dhowells@redhat.com Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1553896238-22130-1-git-send-email-xiaochen.shen@intel.com | 01 April 2019, 16:45:27 UTC |
| f560bd1 | Matteo Croce | 28 March 2019, 11:42:33 UTC | x86/realmode: Make set_real_mode_mem() static inline Remove the unused @size argument and move it into a header file, so it can be inlined. [ bp: Massage. ] Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190328114233.27835-1-mcroce@redhat.com | 29 March 2019, 09:16:27 UTC |
| f6027c8 | Jann Horn | 28 March 2019, 15:49:48 UTC | x86/cpufeature: Fix __percpu annotation in this_cpu_has() &cpu_info.x86_capability is __percpu, and the second argument of x86_this_cpu_test_bit() is expected to be __percpu. Don't cast the __percpu away and then implicitly add it again. This gets rid of 106 lines of sparse warnings with the kernel config I'm using. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nadav Amit <namit@vmware.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190328154948.152273-1-jannh@google.com | 28 March 2019, 16:03:11 UTC |
| 92c77f7 | Ralph Campbell | 26 March 2019, 00:18:17 UTC | x86/mm: Don't exceed the valid physical address space valid_phys_addr_range() is used to sanity check the physical address range of an operation, e.g., access to /dev/mem. It uses __pa(high_memory) internally. If memory is populated at the end of the physical address space, then __pa(high_memory) is outside of the physical address space because: high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; For the comparison in valid_phys_addr_range() this is not an issue, but if CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which verifies that the resulting physical address is within the valid physical address space of the CPU. So in the case that memory is populated at the end of the physical address space, this is not true and triggers a VIRTUAL_BUG_ON(). Use __pa(high_memory - 1) to prevent the conversion from going beyond the end of valid physical addresses. Fixes: be62a3204406 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Craig Bergstrom <craigb@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Link: https://lkml.kernel.org/r/20190326001817.15413-2-rcampbell@nvidia.com | 28 March 2019, 13:13:51 UTC |
| a9d57ef | Daniel Borkmann | 25 March 2019, 13:56:20 UTC | x86/retpolines: Disable switch jump tables when retpolines are enabled Commit ce02ef06fcf7 ("x86, retpolines: Raise limit for generating indirect calls from switch-case") raised the limit under retpolines to 20 switch cases where gcc would only then start to emit jump tables, and therefore effectively disabling the emission of slow indirect calls in this area. After this has been brought to attention to gcc folks [0], Martin Liska has then fixed gcc to align with clang by avoiding to generate switch jump tables entirely under retpolines. This is taking effect in gcc starting from stable version 8.4.0. Given kernel supports compilation with older versions of gcc where the fix is not being available or backported anymore, we need to keep the extra KBUILD_CFLAGS around for some time and generally set the -fno-jump-tables to align with what more recent gcc is doing automatically today. More than 20 switch cases are not expected to be fast-path critical, but it would still be good to align with gcc behavior for versions < 8.4.0 in order to have consistency across supported gcc versions. vmlinux size is slightly growing by 0.27% for older gcc. This flag is only set to work around affected gcc, no change for clang. [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86952 Suggested-by: Martin Liska <mliska@suse.cz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Björn Töpel<bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Link: https://lkml.kernel.org/r/20190325135620.14882-1-daniel@iogearbox.net | 28 March 2019, 12:39:48 UTC |
| b929a50 | Matteo Croce | 26 March 2019, 20:30:46 UTC | x86/realmode: Don't leak the trampoline kernel address Since commit ad67b74d2469 ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of the trampoline addresses: Base memory trampoline at [(____ptrval____)] 99000 size 24576 Remove the print as we don't want to leak kernel addresses and this statement is not needed anymore. Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com | 27 March 2019, 13:22:08 UTC |
| 0f02dae | Baoquan He | 04 March 2019, 05:55:46 UTC | x86/boot: Fix incorrect ifdeffery scope The declarations related to immovable memory handling are out of the BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com | 27 March 2019, 13:00:51 UTC |
| 7f2daa9 | Peng Hao | 09 March 2019, 17:29:44 UTC | x86/resctrl: Remove unused variable Variable "struct rdt_resource *r" is set but not used. So remove it. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1552152584-26087-1-git-send-email-peng.hao2@zte.com.cn | 24 March 2019, 21:09:27 UTC |
| 8c2ffd9 | Linus Torvalds | 24 March 2019, 21:02:26 UTC | Linux 5.1-rc2 | 24 March 2019, 21:02:26 UTC |
| 17403fa | Linus Torvalds | 24 March 2019, 20:41:37 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for 5.1" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: prohibit fstrim in norecovery mode ext4: cleanup bh release code in ext4_ind_remove_space() ext4: brelse all indirect buffer in ext4_ind_remove_space() ext4: report real fs size after failed resize ext4: add missing brelse() in add_new_gdb_meta_bg() ext4: remove useless ext4_pin_inode() ext4: avoid panic during forced reboot ext4: fix data corruption caused by unaligned direct AIO ext4: fix NULL pointer dereference while journal is aborted | 24 March 2019, 20:41:37 UTC |
| 231c807 | Linus Torvalds | 24 March 2019, 18:42:10 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: "Third more careful attempt for this set of fixes: - Prevent a 32bit math overflow in the cpufreq code - Fix a buffer overflow when scanning the cgroup2 cpu.max property - A set of fixes for the NOHZ scheduler logic to prevent waking up CPUs even if the capacity of the busy CPUs is sufficient along with other tweaks optimizing the behaviour for asymmetric systems (big/little)" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Skip LLC NOHZ logic for asymmetric systems sched/fair: Tune down misfit NOHZ kicks sched/fair: Comment some nohz_balancer_kick() kick conditions sched/core: Fix buffer overflow in cgroup2 property cpu.max sched/cpufreq: Fix 32-bit math overflow | 24 March 2019, 18:42:10 UTC |
| 49ef015 | Linus Torvalds | 24 March 2019, 18:16:27 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "A larger set of perf updates. Not all of them are strictly fixes, but that's solely the tip maintainers fault as they let the timely -rc1 pull request fall through the cracks for various reasons including travel. So I'm sending this nevertheless because rebasing and distangling fixes and updates would be a mess and risky as well. As of tomorrow, a strict fixes separation is happening again. Sorry for the slip-up. Kernel: - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different consumers of the mmap event get what they requested. Tools: - A larger set of updates to perf record/report/scripts vs. time stamp handling - More Python3 fixups - A pile of memory leak plumbing - perf BPF improvements and fixes - Finalize the perf.data directory storage" [ Note: the kernel part is strictly a fix, the updates are purely to tooling - Linus ] * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) perf bpf: Show more BPF program info in print_bpf_prog_info() perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog() perf tools: Save bpf_prog_info and BTF of new BPF programs perf evlist: Introduce side band thread perf annotate: Enable annotation of BPF programs perf build: Check what binutils's 'disassembler()' signature to use perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO perf feature detection: Add -lopcodes to feature-libbfd perf top: Add option --no-bpf-event perf bpf: Save BTF information as headers to perf.data perf bpf: Save BTF in a rbtree in perf_env perf bpf: Save bpf_prog_info information as headers to perf.data perf bpf: Save bpf_prog_info in a rbtree in perf_env perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear() bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump() tools lib bpf: Introduce bpf_program__get_prog_info_linear() perf record: Replace option --bpf-event with --no-bpf-event perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test() ... | 24 March 2019, 18:16:27 UTC |
| 19caf58 | Linus Torvalds | 24 March 2019, 18:12:27 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Prevent potential NULL pointer dereferences in the HPET and HyperV code - Exclude the GART aperture from /proc/kcore to prevent kernel crashes on access - Use the correct macros for Cyrix I/O on Geode processors - Remove yet another kernel address printk leak - Announce microcode reload completion as requested by quite some people. Microcode loading has become popular recently. - Some 'Make Clang' happy fixlets - A few cleanups for recently added code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/gart: Exclude GART aperture from kcore x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error x86/mm/pti: Make local symbols static x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors x86/microcode: Announce reload operation's completion x86/hyperv: Prevent potential NULL pointer dereference x86/hpet: Prevent potential NULL pointer dereference x86/lib: Fix indentation issue, remove extra tab x86/boot: Restrict header scope to make Clang happy x86/mm: Don't leak kernel addresses x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header | 24 March 2019, 18:12:27 UTC |
| a75eda7 | Linus Torvalds | 24 March 2019, 18:09:47 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes plus the removal of stale board support code: - Remove the board support code from the clpx711x clocksource driver. This change had fallen through the cracks and I'm sending it now rather than dealing with people who want to improve that stale code for 3 month. - Use the proper clocksource mask on RICSV - Make local scope functions and variables static" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/clps711x: Remove board support clocksource/drivers/riscv: Fix clocksource mask clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static clocksource/drivers/clps711x: Make clps711x_clksrc_init() static time/jiffies: Make refined_jiffies static | 24 March 2019, 18:09:47 UTC |
| f6cc519 | Linus Torvalds | 24 March 2019, 17:58:01 UTC | Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two small fixes: - Cure a recently introduces error path hickup which tries to unregister a not registered lockdep key in te workqueue code - Prevent unaligned cmpxchg() crashes in the robust list handling code by sanity checking the user space supplied futex pointer" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Ensure that futex address is aligned in handle_futex_death() workqueue: Only unregister a registered lockdep key | 24 March 2019, 17:58:01 UTC |
| e08fef8 | Linus Torvalds | 24 March 2019, 17:51:23 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Remove secondary GIC support on systems w/o device-tree support - A set of small fixlets in various irqchip drivers - static and fall-through annotations - Kernel doc and typo fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Mark expected switch case fall-through genirq/devres: Remove excess parameter from kernel doc irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static irqchip/mbigen: Don't clear eventid when freeing an MSI irqchip/stm32: Don't set rising configuration registers at init irqchip/stm32: Don't clear rising/falling config registers at init dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support irqchip/mmp: Make mmp_irq_domain_ops static irqchip/brcmstb-l2: Make two init functions static genirq: Fix typo in comment of IRQD_MOVE_PCNTXT irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp irqchip/gic: Drop support for secondary GIC in non-DT systems irqchip/imx-irqsteer: Fix of_property_read_u32() error handling | 24 March 2019, 17:51:23 UTC |
| 1ebf5af | Linus Torvalds | 24 March 2019, 17:17:33 UTC | Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "Two small fixes: - Move the large objtool_file struct off the stack so objtool works in setups with a tight stack limit. - Make a few variables static in the watchdog core code" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog/core: Make variables static objtool: Move objtool_file struct off the stack | 24 March 2019, 17:17:33 UTC |
| 9fc13bb | Linus Torvalds | 24 March 2019, 17:01:53 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a wrong __percpu structure declaration in intel_powerclamp driver (Luc Van Oostenryck) - Fix truncated name of the idle injection kthreads created by intel_powerclamp driver (Zhang Rui) - Fix the missing UUID supports in int3400 thermal driver (Matthew Garrett) - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver (Phil Elwell) - A couple of trivial fixes/cleanups in some SoC thermal drivers * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel_powerclamp: fix truncated kthread name thermal: mtk: Allocate enough space for mtk_thermal. thermal/int340x_thermal: fix mode setting thermal/int340x_thermal: Add additional UUIDs thermal: cpu_cooling: Remove unused cur_freq variable thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs thermal: samsung: Fix incorrect check after code merge thermal/intel_powerclamp: fix __percpu declaration of worker_data | 24 March 2019, 17:01:53 UTC |
| 38104c0 | Linus Torvalds | 24 March 2019, 16:58:08 UTC | Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull smb3 fixes from Steve French: - two fixes for stable for guest mount problems with smb3.1.1 - two fixes for crediting (SMB3 flow control) on resent requests - a byte range lock leak fix - two fixes for incorrect rc mappings * tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number SMB3: Fix SMB3.1.1 guest mounts to Samba cifs: Fix slab-out-of-bounds when tracing SMB tcon cifs: allow guest mounts to work for smb3.11 fix incorrect error code mapping for OBJECTID_NOT_FOUND cifs: fix that return -EINVAL when do dedupe operation CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN | 24 March 2019, 16:58:08 UTC |
| e0046bb | Linus Torvalds | 24 March 2019, 16:51:55 UTC | Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux Pull auxdisplay updates from Miguel Ojeda: "A few fixes and improvements for auxdisplay: - Series to fix a memory leak in hd44780 while introducing charlcd_free(). From Andy Shevchenko - Series to clean up the Kconfig menus and a couple of improvements for charlcd. From Mans Rullgard" * tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux: auxdisplay: charlcd: make backlight initial state configurable auxdisplay: charlcd: simplify init message display auxdisplay: deconfuse configuration auxdisplay: hd44780: Convert to use charlcd_free() auxdisplay: panel: Convert to use charlcd_free() auxdisplay: charlcd: Introduce charlcd_free() helper auxdisplay: charlcd: Move to_priv() to charlcd namespace auxdisplay: hd44780: Fix memory leak on ->remove() | 24 March 2019, 16:51:55 UTC |
| 1fa8109 | Linus Torvalds | 24 March 2019, 16:43:35 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes to four drivers and two core fixes. One core fix simply corrects a missed destroy_rcu_head() but the other is hopefully the end of an ongoing effort to make suspend/resume play nicely with scsi quiesce" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsi: Fix empty event pool access during host removal scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset() scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID scsi: qla2xxx: Fix FC-AL connection target discovery scsi: core: Avoid that a kernel warning appears during system resume scsi: core: Also call destroy_rcu_head() for passthrough requests scsi: iscsi: flush running unbind operations when removing a session | 24 March 2019, 16:43:35 UTC |
| 2a6a8e2 | Alexander Shiyan | 20 December 2018, 11:16:26 UTC | clocksource/drivers/clps711x: Remove board support Since board support for the CLPS711X platform was removed, remove the board support from the clps711x-timer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru | 24 March 2019, 10:30:11 UTC |
| 1bdd3db | Linus Torvalds | 23 March 2019, 17:25:12 UTC | Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block Pull io_uring fixes and improvements from Jens Axboe: "The first five in this series are heavily inspired by the work Al did on the aio side to fix the races there. The last two re-introduce a feature that was in io_uring before it got merged, but which I pulled since we didn't have a good way to have BVEC iters that already have a stable reference. These aren't necessarily related to block, it's just how io_uring pins fixed buffers" * tag 'io_uring-20190323' of git://git.kernel.dk/linux-block: block: add BIO_NO_PAGE_REF flag iov_iter: add ITER_BVEC_FLAG_NO_REF flag io_uring: mark me as the maintainer io_uring: retry bulk slab allocs as single allocs io_uring: fix poll races io_uring: fix fget/fput handling io_uring: add prepped flag io_uring: make io_read/write return an integer io_uring: use regular request ref counts | 23 March 2019, 17:25:12 UTC |
| 2335cbe | Linus Torvalds | 23 March 2019, 17:14:42 UTC | Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A set of fixes/changes that should go into this series. This contains: - Kernel doc / comment updates (Bart, Shenghui) - Un-export of core-only used function (Bart) - Fix race on loop file access (Dongli) - pf/pcd queue cleanup fixes (me) - Use appropriate helper for RESTART bit set (Yufen) - Use named identifier for classic poll (Yufen)" * tag 'for-linus-20190323' of git://git.kernel.dk/linux-block: sbitmap: trivial - update comment for sbitmap_deferred_clear_bit blkcg: Fix kernel-doc warnings blk-iolatency: #include "blk.h" block: Unexport blk_mq_add_to_requeue_list() block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx loop: access lo_backing_file only when the loop device is Lo_bound blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART paride/pcd: cleanup queues when detection fails paride/pf: cleanup queues when detection fails | 23 March 2019, 17:14:42 UTC |
| 9a1050a | Linus Torvalds | 23 March 2019, 17:04:47 UTC | Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A follow up for the new alloc_size logic and a blacklisting fix, marked for stable" * tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client: rbd: drop wait_for_latest_osdmap() libceph: wait for latest osdmap in ceph_monc_blacklist_add() rbd: set io_min, io_opt and discard_granularity to alloc_size | 23 March 2019, 17:04:47 UTC |
| 18915b5 | Darrick J. Wong | 23 March 2019, 16:10:29 UTC | ext4: prohibit fstrim in norecovery mode The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 23 March 2019, 16:10:29 UTC |
| 5e86bdd | zhangyi (F) | 23 March 2019, 15:56:01 UTC | ext4: cleanup bh release code in ext4_ind_remove_space() Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> | 23 March 2019, 15:56:01 UTC |
| 674a2b2 | zhangyi (F) | 23 March 2019, 15:43:05 UTC | ext4: brelse all indirect buffer in ext4_ind_remove_space() All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org | 23 March 2019, 15:43:05 UTC |
| 93417a3 | Gustavo A. R. Silva | 28 February 2019, 21:37:14 UTC | genirq: Mark expected switch case fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. With -Wimplicit-fallthrough added to CFLAGS: kernel/irq/manage.c: In function ‘irq_do_set_affinity’: kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cpumask_copy(desc->irq_common_data.affinity, mask); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/irq/manage.c:199:2: note: here case IRQ_SET_MASK_OK_NOCOPY: ^~~~ Annotate it. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor | 23 March 2019, 11:32:01 UTC |
| 32d0be0 | Atish Patra | 22 March 2019, 21:54:11 UTC | clocksource/drivers/riscv: Fix clocksource mask For all riscv architectures (RV32, RV64 and RV128), the clocksource is a 64 bit incrementing counter. Fix the clock source mask accordingly. Tested on both 64bit and 32 bit virt machine in QEMU. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-riscv@lists.infradead.org Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com | 23 March 2019, 11:25:34 UTC |
| ffc8599 | Kairui Song | 08 March 2019, 03:05:08 UTC | x86/gart: Exclude GART aperture from kcore On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash. vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory. Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet. Suggested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Dave Young <dyoung@redhat.com> Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com | 23 March 2019, 11:11:49 UTC |
| cf7d624 | Steve French | 20 March 2019, 21:42:50 UTC | cifs: update internal module version number To 2.19 Signed-off-by: Steve French <stfrench@microsoft.com> | 23 March 2019, 03:43:04 UTC |
| 8c11a60 | Steve French | 23 March 2019, 03:31:17 UTC | SMB3: Fix SMB3.1.1 guest mounts to Samba Workaround problem with Samba responses to SMB3.1.1 null user (guest) mounts. The server doesn't set the expected flag in the session setup response so we have to do a similar check to what is done in smb3_validate_negotiate where we also check if the user is a null user (but not sec=krb5 since username might not be passed in on mount for Kerberos case). Note that the commit below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for cases where there is no user (even if server forgets to set the flag in the response) since we don't have anything useful to sign with. This is especially important now that the more secure SMB3.1.1 protocol is in the default dialect list. An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed the guest mounts to Windows. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> | 23 March 2019, 03:42:49 UTC |
| 68ddb49 | Paulo Alcantara (SUSE) | 21 March 2019, 22:31:22 UTC | cifs: Fix slab-out-of-bounds when tracing SMB tcon This patch fixes the following KASAN report: [ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180 [ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812 [ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62 [ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [ 779.044761] Call Trace: [ 779.044769] dump_stack+0x5b/0x90 [ 779.044775] ? string+0xab/0x180 [ 779.044781] print_address_description+0x6c/0x23c [ 779.044787] ? string+0xab/0x180 [ 779.044792] ? string+0xab/0x180 [ 779.044797] kasan_report.cold.3+0x1a/0x32 [ 779.044803] ? string+0xab/0x180 [ 779.044809] string+0xab/0x180 [ 779.044816] ? widen_string+0x160/0x160 [ 779.044822] ? vsnprintf+0x5bf/0x7f0 [ 779.044829] vsnprintf+0x4e7/0x7f0 [ 779.044836] ? pointer+0x4a0/0x4a0 [ 779.044841] ? seq_buf_vprintf+0x79/0xc0 [ 779.044848] seq_buf_vprintf+0x62/0xc0 [ 779.044855] trace_seq_printf+0x113/0x210 [ 779.044861] ? trace_seq_puts+0x110/0x110 [ 779.044867] ? trace_raw_output_prep+0xd8/0x110 [ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0 [ 779.044882] print_trace_line+0x377/0x890 [ 779.044888] ? tracing_buffers_read+0x300/0x300 [ 779.044893] ? ring_buffer_read+0x58/0x70 [ 779.044899] s_show+0x6e/0x140 [ 779.044906] seq_read+0x505/0x6a0 [ 779.044913] vfs_read+0xaf/0x1b0 [ 779.044919] ksys_read+0xa1/0x130 [ 779.044925] ? kernel_write+0xa0/0xa0 [ 779.044931] ? __do_page_fault+0x3d5/0x620 [ 779.044938] do_syscall_64+0x63/0x150 [ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.044949] RIP: 0033:0x7f62c2c2db31 [ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02 02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003 [ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710 [ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000 [ 779.044981] Allocated by task 1257: [ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 779.044992] kmem_cache_alloc+0xad/0x1a0 [ 779.044997] getname_flags+0x6c/0x2a0 [ 779.045003] user_path_at_empty+0x1d/0x40 [ 779.045008] do_faccessat+0x12a/0x330 [ 779.045012] do_syscall_64+0x63/0x150 [ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045019] Freed by task 1257: [ 779.045023] __kasan_slab_free+0x12e/0x180 [ 779.045029] kmem_cache_free+0x85/0x1b0 [ 779.045034] filename_lookup.part.70+0x176/0x250 [ 779.045039] do_faccessat+0x12a/0x330 [ 779.045043] do_syscall_64+0x63/0x150 [ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045052] The buggy address belongs to the object at ffff88814f326600 which belongs to the cache names_cache of size 4096 [ 779.045057] The buggy address is located 872 bytes to the right of 4096-byte region [ffff88814f326600, ffff88814f327600) [ 779.045058] The buggy address belongs to the page: [ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0 [ 779.045067] flags: 0x200000000010200(slab|head) [ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40 [ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 779.045083] page dumped because: kasan: bad access detected [ 779.045085] Memory state around the buggy address: [ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045099] ^ [ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045109] ================================================================== [ 779.045110] Disabling lock debugging due to kernel taint Correctly assign tree name str for smb3_tcon event. Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by: Steve French <stfrench@microsoft.com> | 23 March 2019, 03:36:54 UTC |
| e71ab2a | Ronnie Sahlberg | 21 March 2019, 04:59:02 UTC | cifs: allow guest mounts to work for smb3.11 Fix Guest/Anonymous sessions so that they work with SMB 3.11. The commit noted below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for Guest/Anonumous sessions. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> | 23 March 2019, 03:36:54 UTC |
| 85f9987 | Steve French | 17 March 2019, 20:58:38 UTC | fix incorrect error code mapping for OBJECTID_NOT_FOUND It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one). As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com> | 23 March 2019, 03:36:54 UTC |
| b073a08 | Xiaoli Feng | 16 March 2019, 04:11:54 UTC | cifs: fix that return -EINVAL when do dedupe operation dedupe_file_range operations is combiled into remap_file_range. But it's always skipped for dedupe operations in function cifs_remap_file_range. Example to test: Before this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument After this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Operation not supported Influence for xfstests: generic/091 generic/112 generic/127 generic/263 These tests report this error "do_copy_range:: Invalid argument" instead of "FIDEDUPERANGE: Invalid argument". Because there are still two bugs cause these test failed. https://bugzilla.kernel.org/show_bug.cgi?id=202935 https://bugzilla.kernel.org/show_bug.cgi?id=202785 Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 23 March 2019, 03:36:54 UTC |
| 0b0dfd5 | Long Li | 15 March 2019, 07:55:00 UTC | CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN When sending a rdata, transport may return -EAGAIN. In this case we should re-obtain credits because the session may have been reconnected. Change in v2: adjust_credits before re-sending Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> | 23 March 2019, 03:36:54 UTC |
| d53e292 | Long Li | 15 March 2019, 07:54:59 UTC | CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN When sending a wdata, transport may return -EAGAIN. In this case we should re-obtain credits because the session may have been reconnected. Change in v2: adjust_credits before re-sending Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> | 23 March 2019, 03:36:54 UTC |
| 9039de4 | YueHaibing | 22 March 2019, 14:43:59 UTC | clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static Fix sparse warning: drivers/clocksource/mips-gic-timer.c:70:18: warning: symbol 'gic_compare_irqaction' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com | 22 March 2019, 21:59:33 UTC |
| 008258d | YueHaibing | 22 March 2019, 14:43:02 UTC | clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static Fix sparse warning: drivers/clocksource/timer-ti-dm.c:589:5: warning: symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com | 22 March 2019, 21:59:33 UTC |
| bddee90 | YueHaibing | 22 March 2019, 14:39:40 UTC | clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static Fix sparse warnings: drivers/clocksource/tcb_clksrc.c:74:6: warning: symbol 'tc_clksrc_suspend' was not declared. Should it be static? drivers/clocksource/tcb_clksrc.c:89:6: warning: symbol 'tc_clksrc_resume' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <nicolas.ferre@microchip.com> Cc: <daniel.lezcano@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com | 22 March 2019, 21:59:33 UTC |
| d18a740 | YueHaibing | 22 March 2019, 14:37:08 UTC | clocksource/drivers/clps711x: Make clps711x_clksrc_init() static Fix sparse warning: drivers/clocksource/clps711x-timer.c:96:13: warning: symbol 'clps711x_clksrc_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Cc: <shc_work@mail.ru> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com | 22 March 2019, 21:59:32 UTC |
| d8b5297 | Thomas Gleixner | 22 March 2019, 21:51:21 UTC | Merge tag 'perf-core-for-mingo-5.1-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo: BPF: Song Liu: - Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT and PERF_RECORD_KSYMBOL recently added to the kernel and plugging binutils's libopcodes disassembly of BPF programs with the existing annotation interfaces in 'perf annotate', 'perf report' and 'perf top' various output formats (--stdio, --stdio2, --tui). perf list: Andi Kleen: - Filter metrics when using substring search. perf record: Andi Kleen: - Allow to limit number of reported perf.data files - Clarify help for --switch-output. perf report: Andi Kleen - Indicate JITed code better. - Show all sort keys in help output. perf script: Andi Kleen: - Support relative time. perf stat: Andi Kleen: - Improve scaling. General: Changbin Du: - Fix some mostly error path memory and reference count leaks found using gcc's ASan and UBSan. Vendor events: Mamatha Inamdar: - Remove P8 HW events which are not supported. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 22 March 2019, 21:51:21 UTC |
| 4a98be8 | Thomas Gleixner | 22 March 2019, 21:50:41 UTC | Merge tag 'perf-core-for-mingo-5.1-20190311' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo: kernel: Stephane Eranian : - Restore mmap record type correctly when handling PERF_RECORD_MMAP2 events, as the same template is used for all the threads interested in mmap events, some may want just PERF_RECORD_MMAP, while some may want the extra info in MMAP2 records. perf probe: Adrian Hunter: - Fix getting the kernel map, because since changes related to x86 PTI entry trampolines handling, there are more than one kernel map. perf script: Andi Kleen: - Support insn output for normal samples, i.e.: perf script -F ip,sym,insn --xed Will fetch the sample IP from the thread address space and feed it to Intel's XED disassembler, producing lines such as: ffffffffa4068804 native_write_msr wrmsr ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx That match 'perf annotate's output. - Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in addition to PERF_RECORD_SAMPLE. perf report: - Add a new --samples option to save a small random number of samples per hist entry, using a reservoir technique to select a representative number of samples. Then allow browsing the samples using 'perf script' as part of the hist entry context menu. This automatically adds the right filters, so only the thread or CPU of the sample is displayed. Then we use less' search functionality to directly jump to the time stamp of the selected sample. It uses different menus for assembler and source display. Assembler needs xed installed and source needs debuginfo. - Fix the UI browser scripts pop up menu when there are many scripts available. perf report: Andi Kleen: - Add 'time' sort option. E.g.: % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio ... 0.67% 277061.87300 [.] _dl_start 0.50% 277061.87300 [.] f1 0.50% 277061.87300 [.] f2 0.33% 277061.87300 [.] main 0.29% 277061.87300 [.] _dl_lookup_symbol_x 0.29% 277061.87300 [.] dl_main 0.29% 277061.87300 [.] do_lookup_x 0.17% 277061.87300 [.] _dl_debug_initialize 0.17% 277061.87300 [.] _dl_init_paths 0.08% 277061.87300 [.] check_match 0.04% 277061.87300 [.] _dl_count_modids 1.33% 277061.87400 [.] f1 1.33% 277061.87400 [.] f2 1.33% 277061.87400 [.] main 1.17% 277061.87500 [.] main 1.08% 277061.87500 [.] f1 1.08% 277061.87500 [.] f2 1.00% 277061.87600 [.] main 0.83% 277061.87600 [.] f1 0.83% 277061.87600 [.] f2 1.00% 277061.87700 [.] main tools headers: Arnaldo Carvalho de Melo: - Update x86's syscall_64.tbl, no change in tools/perf behaviour. - Sync copies asm-generic/unistd.h and linux/in with the kernel sources. perf data: Jiri Olsa: - Prep work to support having perf.data stored as a directory, with one file per CPU, that ultimately will allow having one ring buffer reading thread per CPU. Vendor events: Martin Liška: - perf PMU events for AMD Family 17h. perf script python: Tony Jones: - Add python3 support for the remaining Intel PT related scripts, with these we should have a clean build of perf with python3 while still supporting the build with python2. libbpf: Arnaldo Carvalho de Melo: - Fix the build on uCLibc, adding the missing stdarg.h since we use va_list in one typedef. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 22 March 2019, 21:50:41 UTC |
| a5ed1e9 | Linus Torvalds | 22 March 2019, 21:15:11 UTC | Merge tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a boot failure on 32-bit, introduced during the merge window. A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC to jump forward and backward. Our spectre_v2 reporting was a bit confusing due to a bug I introduced. On some systems it was reporting that the count cache was disabled and also that we were flushing the count cache on context switch. Only the former is true, and given that the count cache is disabled it doesn't make any sense to flush it. No one reported it, so presumably the presence of any mitigation is all people check for. Finally a small build fix for zsmalloc on 32-bit. Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter Roeck, Michael Neuling" * tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/security: Fix spectre_v2 reporting powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32 powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038 | 22 March 2019, 21:15:11 UTC |
| 070c95d | Linus Torvalds | 22 March 2019, 21:10:27 UTC | Merge tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE - Fix for IOVA code to trigger the slow-path less often - Two fixes for Intel VT-d to avoid writing to read-only registers and to flush the right domain id for the default domains in scalable mode * tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Save the right domain ID used by hardware iommu/vt-d: Check capability before disabling protected memory iommu/iova: Fix tracking of recently failed iova address iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE | 22 March 2019, 21:10:27 UTC |
| dcacc48 | Linus Torvalds | 22 March 2019, 21:04:38 UTC | Merge tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only significant change is the regression fixes for the jack detection at resume on HD-audio, while others are all small or trivial fixes like the coverage of missing error code or usual HD-audio quirk" * tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286 ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec ALSA: hda - Don't trigger jackpoll_work in azx_resume ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist ALSA: firewire-motu: use 'version' field of unit directory to identify model ALSA: sb8: add a check for request_region ALSA: echoaudio: add a check for ioremap_nocache | 22 March 2019, 21:04:38 UTC |
| e420917 | Linus Torvalds | 22 March 2019, 19:08:52 UTC | Merge tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static | 22 March 2019, 19:08:52 UTC |
| 2c1ada4 | Linus Torvalds | 22 March 2019, 19:07:06 UTC | Merge tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent device references acquired by bus_find_device() in acpi_dev_present() from being leaked (Andy Shevchenko)" * tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / utils: Drop reference in test for device presence | 22 March 2019, 19:07:06 UTC |
| b44290a | Linus Torvalds | 22 March 2019, 19:03:19 UTC | Merge tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These rearrange some code in the generic power domains (genpd) framework to avoid a potential deadlock and make the turbostat utility behave more as expected. Specifics: - Rearrange the generic power domains (genpd) code to avoid a potential deadlock possible due to its interactions with the clock framework (Jiada Wang) - Make turbostat return the exit status of the command run under it if that command fails (David Arcari)" * tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Avoid a potential deadlock tools/power turbostat: return the exit status of a command | 22 March 2019, 19:03:19 UTC |
| 599beed | Linus Torvalds | 22 March 2019, 18:26:57 UTC | Merge tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v5.1: - alcor: Fix DMA reads - renesas_sdhi: Limit block count to 16-bit for old revisions - sdhci-omap: Fixup support for read-only pins - mxcmmc: Revert support for highmem pages - davinci/pxamci: Fix clang build warnings" * tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: limit block count to 16 bit for old revisions mmc: alcor: fix DMA reads mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" mmc: davinci: remove extraneous __init annotation mmc: pxamci: fix enum type confusion | 22 March 2019, 18:26:57 UTC |
| 1e4471e | Shenghui Wang | 16 March 2019, 08:24:37 UTC | sbitmap: trivial - update comment for sbitmap_deferred_clear_bit "sbitmap_batch_clear" should be "sbitmap_deferred_clear" Acked-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 22 March 2019, 17:01:02 UTC |
| f779871 | Thomas Gleixner | 22 March 2019, 16:09:59 UTC | Merge branch 'x86/cpu' into x86/urgent Merge the forgotten cleanup patch for the new file, so the mess does not propagate further. | 22 March 2019, 16:09:59 UTC |
| e898e69 | Nathan Chancellor | 07 March 2019, 21:27:56 UTC | x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error When building with -Wsometimes-uninitialized, Clang warns: arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/392 Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com | 22 March 2019, 16:08:17 UTC |
| 48084ab | Valdis Kletnieks | 12 March 2019, 09:33:48 UTC | watchdog/core: Make variables static sparse complains: CHECK kernel/watchdog.c kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available' was not declared. Should it be static? kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask' was not declared. Should it be static? They're not referenced by name from anyplace else, make them static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/7855.1552383228@turing-police | 22 March 2019, 12:40:17 UTC |
| e875005 | Valdis Kletnieks | 12 March 2019, 08:38:35 UTC | time/jiffies: Make refined_jiffies static sparse complains: CHECK kernel/time/jiffies.c kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not declared. Should it be static? Its only used in file scope. Make it static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/32342.1552379915@turing-police | 22 March 2019, 12:38:26 UTC |
| bb2e320 | Valdis Kletnieks | 12 March 2019, 08:17:56 UTC | genirq/devres: Remove excess parameter from kernel doc Building with 'make W=1' complains: CC kernel/irq/devres.o kernel/irq/devres.c:104: warning: Excess function parameter 'thread_fn' description in 'devm_request_any_context_irq' Remove it. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/31207.1552378676@turing-police | 22 March 2019, 12:34:12 UTC |
| 4fe64a6 | Valdis Kletnieks | 12 March 2019, 07:47:53 UTC | x86/mm/pti: Make local symbols static With 'make C=2 W=1', sparse and gcc both complain: CHECK arch/x86/mm/pti.c arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static? arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static? CC arch/x86/mm/pti.o arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes] 605 | void pti_set_kernel_image_nonglobal(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated local (static) symbol. Make both static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/27680.1552376873@turing-police | 22 March 2019, 12:31:28 UTC |
| 5a07168 | Chen Jie | 15 March 2019, 03:44:38 UTC | futex: Ensure that futex address is aligned in handle_futex_death() The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core") Signed-off-by: Chen Jie <chenjie6@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <dvhart@infradead.org> Cc: <peterz@infradead.org> Cc: <zengweilin@huawei.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com | 22 March 2019, 12:05:26 UTC |
| 84c11e4 | Lu Baolu | 20 March 2019, 01:58:34 UTC | iommu/vt-d: Save the right domain ID used by hardware The driver sets a default domain id (FLPT_DEFAULT_DID) in the first level only pasid entry, but saves a different domain id in @sdev->did. The value saved in @sdev->did will be used to invalidate the translation caches. Hence, the driver might result in invalidating the caches with a wrong domain id. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 22 March 2019, 11:02:27 UTC |
| 5bb71fc | Lu Baolu | 20 March 2019, 01:58:33 UTC | iommu/vt-d: Check capability before disabling protected memory The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 22 March 2019, 11:02:26 UTC |
| 80ef446 | Robert Richter | 20 March 2019, 18:57:23 UTC | iommu/iova: Fix tracking of recently failed iova address If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 22 March 2019, 11:01:58 UTC |
| 112a04f | Rafael J. Wysocki | 22 March 2019, 09:12:13 UTC | Merge branch 'pm-domains' into pm * pm-domains: PM / Domains: Avoid a potential deadlock | 22 March 2019, 09:12:13 UTC |
| fd1f297 | Linus Torvalds | 22 March 2019, 03:40:05 UTC | Merge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes. Seems to be lots of little minor ones for regressions in rc1, and some cleanups. The exynos one is the largest one, and is for a hw difference between exynos versions" * tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/dmem: empty chunk do not have a buffer object associated with them. drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure drm/nouveau/dmem: Fix a NULL vs IS_ERR() check drm/nouveau/dmem: remove set but not used variable 'drm' drm/exynos/mixer: fix MIXER shadow registry synchronisation code drm/vmwgfx: Don't double-free the mode stored in par->set_mode drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's drm/amdgpu: fix invalid use of change_bit drm/amdgpu: revert "cleanup setting bulk_movable" drm/i915: Sanity check mmap length against object size drm/i915: Fix off-by-one in reporting hanging process drm/i915/bios: assume eDP is present on port A when there is no VBT drm/udl: use drm_gem_object_put_unlocked. | 22 March 2019, 03:40:05 UTC |
| 8e07878 | Dave Airlie | 22 March 2019, 02:07:16 UTC | Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes - Parially revert a bulk move clean up change to fix a ref count bug - Fix invalid use of change_bit that caused a crash on PPC64 and ARM64 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321020933.3508-1-alexander.deucher@amd.com | 22 March 2019, 02:08:44 UTC |
| 6a9d8fc | Dave Airlie | 22 March 2019, 01:53:28 UTC | Merge branch 'vmwgfx-fixes-5.1' of git://people.freedesktop.org/~thomash/linux into drm-fixes Two fixes CC'd stable. One fix for a long-standing a bit hard-to-trigger fbdev modesetting bug and one out-of-bo-id fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321112026.114328-1-thellstrom@vmware.com | 22 March 2019, 01:53:36 UTC |
| 28d3ba6 | Dave Airlie | 22 March 2019, 01:52:40 UTC | Merge tag 'exynos-drm-fixes-for-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - Fix page fault issue at Mixer device . This patch fixes the page fault issue by correcting sychronization method for updating shadow registers for Mixer device. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553162223-10090-1-git-send-email-inki.dae@samsung.com | 22 March 2019, 01:52:44 UTC |
| 8cf13f7 | Dave Airlie | 22 March 2019, 00:41:51 UTC | Merge tag 'drm-intel-fixes-2019-03-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes A protection on our mmap against attempts to map past the end of the object; plus a fix off-by-one in our hang report and a protection; and a fix for eDP panels on Gen9 platforms on VBT absence. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320201451.GA7993@intel.com | 22 March 2019, 00:52:27 UTC |
| cd84579 | Dave Airlie | 22 March 2019, 00:39:27 UTC | Merge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-fixes Some minor nouveau dmem and other fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==kMkD6n-cS9KpQBcTU1E8p7Wc+H1ZuOhSfD7yTFJVvkw@mail.gmail.com | 22 March 2019, 00:39:35 UTC |
| 8385741 | Jérôme Glisse | 21 March 2019, 19:42:18 UTC | drm/nouveau/dmem: empty chunk do not have a buffer object associated with them. Empty chunk do not have a bo associated with them so no need to pin/unpin on suspend/resume. This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 21 March 2019, 23:58:38 UTC |
| 909e9c9 | YueHaibing | 28 February 2019, 12:24:59 UTC | drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure pm_runtime_get_sync returns negative on failure. Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 21 March 2019, 23:57:58 UTC |
| 18ec3c1 | Dan Carpenter | 22 February 2019, 06:34:04 UTC | drm/nouveau/dmem: Fix a NULL vs IS_ERR() check The hmm_devmem_add() function doesn't return NULL, it returns error pointers. Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 21 March 2019, 23:57:58 UTC |
| 2219c9e | YueHaibing | 21 February 2019, 03:38:51 UTC | drm/nouveau/dmem: remove set but not used variable 'drm' Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free': drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning: variable 'drm' set but not used [-Wunused-but-set-variable] struct nouveau_drm *drm; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 21 March 2019, 23:57:58 UTC |
| d92da1f | Linus Torvalds | 21 March 2019, 18:48:06 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Mostly fixes apart from the kprobe blacklist checking which was deferred because of conflicting with a fix merged after I pinned the arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always blacklist the KVM world-switch code"). Summary: - Update the kprobe blacklist checking for arm64. This was supposed to be queued during the merging window but, due to conflicts, it was deferred post -rc1 - Extend the Fujitsu erratum 010001 workaround to A64FX v1r0 - Whitelist HiSilicon Taishan v110 CPUs as not susceptible to Meltdown - Export save_stack_trace_regs() - Remove obsolete selection of MULTI_IRQ_HANDLER" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: remove obsolete selection of MULTI_IRQ_HANDLER arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs arm64: Add MIDR encoding for HiSilicon Taishan CPUs arm64/stacktrace: Export save_stack_trace_regs() arm64: apply workaround on A64FX v1r0 arm64: kprobes: Use arch_populate_kprobe_blacklist() arm64: kprobes: Move exception_text check in blacklist arm64: kprobes: Remove unneeded RODATA check arm64: kprobes: Move extable address check into arch_prepare_kprobe() | 21 March 2019, 18:48:06 UTC |
| fb549c5 | Linus Torvalds | 21 March 2019, 18:12:56 UTC | Merge tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "Another small SELinux fix for v5.1" * tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix NULL dereference in policydb_destroy() | 21 March 2019, 18:12:56 UTC |
| 0939221 | Linus Torvalds | 21 March 2019, 17:31:55 UTC | Merge tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull udf fixes from Jan Kara: "Two udf error handling fixes" * tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Propagate errors from udf_truncate_extents() udf: Fix crash on IO error during truncate | 21 March 2019, 17:31:55 UTC |
| 7294fbd | Linus Torvalds | 21 March 2019, 17:24:00 UTC | Merge tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify fixes from Jan Kara: "One inotify and one fanotify fix" * tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Allow copying of file handle to userspace inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch() | 21 March 2019, 17:24:00 UTC |
| f27b744 | YueHaibing | 21 March 2019, 15:14:48 UTC | irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static Fix sparse warning: drivers/irqchip/irq-mvebu-sei.c:481:23: warning: symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <jason@lakedaemon.net> Cc: <andrew@lunn.ch> Cc: <gregory.clement@bootlin.com> Cc: <sebastian.hesselbarth@gmail.com> Cc: <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190321151448.15600-1-yuehaibing@huawei.com | 21 March 2019, 15:43:00 UTC |
| f8dfeae | Song Liu | 19 March 2019, 16:54:54 UTC | perf bpf: Show more BPF program info in print_bpf_prog_info() This patch enables showing bpf program name, address, and size in the header. Before the patch: perf report --header-only ... # bpf_prog_info of id 9 # bpf_prog_info of id 10 # bpf_prog_info of id 13 After the patch: # bpf_prog_info 9: bpf_prog_7be49e3934a125ba addr 0xffffffffa0024947 size 229 # bpf_prog_info 10: bpf_prog_2a142ef67aaad174 addr 0xffffffffa007c94d size 229 # bpf_prog_info 13: bpf_prog_47368425825d7384_task__task_newt addr 0xffffffffa0251137 size 369 Committer notes: Fix the fallback definition when HAVE_LIBBPF_SUPPORT is not defined, i.e. add the missing 'static inline' and add the __maybe_unused to the args. Also add stdio.h since we now use FILE * in bpf-event.h. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190319165454.1298742-3-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 21 March 2019, 14:27:04 UTC |
| fc462ac | Song Liu | 19 March 2019, 16:54:53 UTC | perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog() Extract logic to create program names to synthesize_bpf_prog_name(), so that it can be reused in header.c:print_bpf_prog_info(). This commit doesn't change the behavior. Signed-off-by: Song Liu <songliubraving@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190319165454.1298742-2-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 21 March 2019, 14:27:04 UTC |
| d56354d | Song Liu | 12 March 2019, 05:30:51 UTC | perf tools: Save bpf_prog_info and BTF of new BPF programs To fully annotate BPF programs with source code mapping, 4 different information are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf This patch handles 3) and 4) for BPF programs loaded after 'perf record|top'. For timely process of these information, a dedicated event is added to the side band evlist. When PERF_RECORD_BPF_EVENT is received via the side band event, the polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env. This information is saved to perf.data at the end of 'perf record'. Committer testing: The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a unnamed union, so can't be used in a struct designated initialization with older gccs, get it out of that, isolating as 'attr.wakeup_watermark = 1;' to work with all gcc versions. We also need to add '--no-bpf-event' to the 'perf record' perf_event_attr tests in 'perf test', as the way that that test goes is to intercept the events being setup and looking if they match the fields described in the control files, since now it finds first the side band event used to catch the PERF_RECORD_BPF_EVENT, they all fail. With these issues fixed: Same scenario as for testing BPF programs loaded before 'perf record' or 'perf top' starts, only start the BPF programs after 'perf record|top', so that its information get collected by the sideband threads, the rest works as for the programs loaded before start monitoring. Add missing 'inline' to the bpf_event__add_sb_event() when HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without binutils devel files installed. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 21 March 2019, 14:27:04 UTC |
| 657ee55 | Song Liu | 12 March 2019, 05:30:50 UTC | perf evlist: Introduce side band thread This patch introduces side band thread that captures extended information for events like PERF_RECORD_BPF_EVENT. This new thread uses its own evlist that uses ring buffer with very low watermark for lower latency. To use side band thread, we need to: 1. add side band event(s) by calling perf_evlist__add_sb_event(); 2. calls perf_evlist__start_sb_thread(); 3. at the end of perf run, perf_evlist__stop_sb_thread(). In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT. Committer notes: Add fix by Jiri Olsa for when te sb_tread can't get started and then at the end the stop_sb_thread() segfaults when joining the (non-existing) thread. That can happen when running 'perf top' or 'perf record' as a normal user, for instance. Further checks need to be done on top of this to more graciously handle these possible failure scenarios. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-15-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 21 March 2019, 14:27:03 UTC |
| 3ce8461 | Thomas Gleixner | 21 March 2019, 11:30:54 UTC | Merge tag 'irqchip-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0) | 21 March 2019, 11:30:54 UTC |
| 0f4d3aa | Matthew Whitehead | 14 March 2019, 20:46:01 UTC | x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors The getCx86_old() and setCx86_old() macros have been replaced with correctly working getCx86() and setCx86(), so remove these unused macros. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: luto@kernel.org Link: https://lkml.kernel.org/r/1552596361-8967-3-git-send-email-tedheadster@gmail.com | 21 March 2019, 11:28:50 UTC |
| 18fb053 | Matthew Whitehead | 14 March 2019, 20:46:00 UTC | x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Tested on an actual Geode processor. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: luto@kernel.org Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com | 21 March 2019, 11:28:50 UTC |
| 9bd6812 | Borislav Petkov | 13 March 2019, 11:00:22 UTC | x86/microcode: Announce reload operation's completion By popular demand, issue a single line to dmesg after the reload operation completes to let the user know that a reload has at least been attempted. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190313110022.8229-1-bp@alien8.de | 21 March 2019, 11:24:39 UTC |
| 534c89c | Kangjie Lu | 14 March 2019, 05:46:51 UTC | x86/hyperv: Prevent potential NULL pointer dereference The page allocation in hv_cpu_init() can fail, but the code does not have a check for that. Add a check and return -ENOMEM when the allocation fails. [ tglx: Massaged changelog ] Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Acked-by: "K. Y. Srinivasan" <kys@microsoft.com> Cc: pakki001@umn.edu Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: linux-hyperv@vger.kernel.org Link: https://lkml.kernel.org/r/20190314054651.1315-1-kjlu@umn.edu | 21 March 2019, 11:24:39 UTC |
| 2e84f11 | Aditya Pakki | 19 March 2019, 02:19:56 UTC | x86/hpet: Prevent potential NULL pointer dereference hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check. Add a check to prevent NULL pointer dereference. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kjlu@umn.edu Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Roland Dreier <roland@purestorage.com> Link: https://lkml.kernel.org/r/20190319021958.17275-1-pakki001@umn.edu | 21 March 2019, 11:24:38 UTC |
