2f26c48 | Ralf Baechle | 17 December 2014, 22:05:10 UTC | MIPS: Use generic csum_tcpudp_magic for MIPS. Its implementation is identical to MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
b4b5015 | Ralf Baechle | 17 December 2014, 22:03:46 UTC | MIPS: Use <asm-generic/checksum.h> Right now the MIPS <asm/checksum.h> still overrides all functions. This will change in the future. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
d0f0f63 | Ralf Baechle | 17 December 2014, 13:06:00 UTC | MIPS: Rewrite csum_fold to plain C. This isn't only short and easier to read and fully portable but also shrinks a Malta kernel's by 160 bytes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
eaa27f3 | Linus Torvalds | 11 January 2015, 20:44:53 UTC | linux 3.19-rc4 | 11 January 2015, 20:44:53 UTC |
0cbaed1 | Linus Torvalds | 11 January 2015, 20:44:10 UTC | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall | 11 January 2015, 20:44:10 UTC |
505569d | Linus Torvalds | 11 January 2015, 19:53:46 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm | 11 January 2015, 19:53:46 UTC |
5ab551d | Linus Torvalds | 11 January 2015, 19:51:49 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: group scheduling corner case fix, two deadline scheduler fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs system fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() sched/deadline: Avoid double-accounting in case of missed deadlines sched/deadline: Fix migration of SCHED_DEADLINE tasks sched: Fix odd values in effective_load() calculations sched, fanotify: Deal with nested sleeps sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation | 11 January 2015, 19:51:49 UTC |
ddb321a | Linus Torvalds | 11 January 2015, 19:47:45 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also some kernel side fixes: uncore PMU driver fix, user regs sampling fix and an instruction decoder fix that unbreaks PEBS precise sampling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes perf/x86_64: Improve user regs sampling perf: Move task_pt_regs sampling into arch code x86: Fix off-by-one in instruction decoder perf hists browser: Fix segfault when showing callchain perf callchain: Free callchains when hist entries are deleted perf hists: Fix children sort key behavior perf diff: Fix to sort by baseline field by default perf list: Fix --raw-dump option perf probe: Fix crash in dwarf_getcfi_elf perf probe: Fix to fall back to find probe point in symbols perf callchain: Append callchains only when requested perf ui/tui: Print backtrace symbols when segfault occurs perf report: Show progress bar for output resorting | 11 January 2015, 19:47:45 UTC |
1e6c3e8 | Linus Torvalds | 11 January 2015, 19:46:31 UTC | Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "A liblockdep fix and a mutex_unlock() mutex-debugging fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Always clear owner field upon mutex_unlock() tools/liblockdep: Fix debug_check thinko in mutex destroy | 11 January 2015, 19:46:31 UTC |
b800c91 | Konstantin Khlebnikov | 11 January 2015, 13:54:06 UTC | mm: fix corner case in anon_vma endless growing prevention Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel BUG at mm/rmap.c:399!") caused by commit 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Anon_vma_clone() is usually called for a copy of source vma in destination argument. If source vma has anon_vma it should be already in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's called from anon_vma_fork(). In this case anon_vma_clone() finds anon_vma for reusing. Vma_adjust() calls it differently and this breaks anon_vma reusing logic: anon_vma_clone() links vma to old anon_vma and updates degree counters but vma_adjust() overrides vma->anon_vma right after that. As a result final unlink_anon_vmas() decrements degree for wrong anon_vma. This patch assigns ->anon_vma before calling anon_vma_clone(). Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com> Reported-and-tested-by: Oded Gabbay <oded.gabbay@amd.com> Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # to match back-porting of 7a3ef208e662 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 January 2015, 19:45:10 UTC |
690eac5 | Linus Torvalds | 11 January 2015, 19:33:57 UTC | mm: Don't count the stack guard page towards RLIMIT_STACK Commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page") made sure that we return the error properly for stack growth conditions. It also theorized that counting the guard page towards the stack limit might break something, but also said "Let's see if anybody notices". Somebody did notice. Apparently android-x86 sets the stack limit very close to the limit indeed, and including the guard page in the rlimit check causes the android 'zygote' process problems. So this adds the (fairly trivial) code to make the stack rlimit check be against the actual real stack size, rather than the size of the vma that includes the guard page. Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org> Cc: Jay Foad <jay.foad@gmail.com> Cc: stable@kernel.org # to match back-porting of fee7e49d4514 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 January 2015, 19:33:57 UTC |
8e654dd | Ingo Molnar | 11 January 2015, 08:18:05 UTC | Merge branch 'core/urgent' into locking/urgent, to collect all pending locking fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 January 2015, 08:18:05 UTC |
4850d37 | Linus Torvalds | 10 January 2015, 20:23:03 UTC | Merge tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio Pull VFIO fix from Alex Williamson: "Fix PCI header check in vfio_pci_probe() (Wei Yang)" * tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix the check on pci device type in vfio_pci_probe() | 10 January 2015, 20:23:03 UTC |
aff8ad5 | Linus Torvalds | 10 January 2015, 19:59:25 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix: a qlogic busy wait regression" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla2xxx: fix busy wait regression | 10 January 2015, 19:59:25 UTC |
eb74926 | Linus Torvalds | 10 January 2015, 05:23:27 UTC | Merge tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All a few small regression or stable fixes: a Nvidia HDMI ID addition, a regression fix for CAIAQ stream count, a typo fix for GPIO setup with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix" * tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireworks: fix an endianness bug for transaction length ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs ALSA: snd-usb-caiaq: fix stream count check | 10 January 2015, 05:23:27 UTC |
28023d2 | Linus Torvalds | 10 January 2015, 05:18:48 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - bounds checking fixes in logitech and roccat drivers, from Peter Wu and Dan Carpenter - double-kfree fix in i2c-hid driver on bus shutdown, from Mika Westerberg - a couple of various small driver fixes - a few device id additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: roccat: potential out of bounds in pyra_sysfs_write_settings() HID: Add a new id 0x501a for Genius MousePen i608X HID: logitech-hidpp: prefix the name with "Logitech" HID: logitech-hidpp: avoid unintended fall-through HID: Allow HID_BATTERY_STRENGTH to be enabled HID: i2c-hid: Do not free buffers in i2c_hid_stop() HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard HID: logitech-hidpp: check WTP report length HID: logitech-dj: check report length | 10 January 2015, 05:18:48 UTC |
1dd34da | Linus Torvalds | 10 January 2015, 05:13:34 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "I'm briefly working between holidays and LCA, so this is close to a couple of weeks of fixes, Two sets of amdkfd fixes, this is a new feature this kernel, and this pull fixes a few issues since it got merged, ordering when built-in to kernel and also the iommu vs gpu ordering patch, it also reworks the ioctl before the initial release. Otherwise: - radeon: some misc fixes all over, hdmi, 4k, dpm - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix - i915: power fixes, revert VGACNTR patch Probably be quiteer next week since I'll be at LCA anyways" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2) drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Init amdkfd only if it was compiled amdkfd: actually allocate longs for the pasid bitmask drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets ... | 10 January 2015, 05:13:34 UTC |
d80b34c | Linus Torvalds | 10 January 2015, 04:57:58 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here is a handful of minor arm64 fixes discovered and fixed over the Christmas break. The main part is adding some missing #includes that we seem to be getting transitively but have started causing problems in -next. - Fix early mapping fixmap corruption by EFI runtime services - Fix __NR_compat_syscalls off-by-one - Add missing sanity checks for some 32-bit registers - Add some missing #includes which we get transitively - Remove unused prepare_to_copy() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: add missing call to early_ioremap_reset() arm64: fix missing asm/io.h include in kernel/smp_spin_table.c arm64: fix missing asm/alternative.h include in kernel/module.c arm64: fix missing linux/bug.h include in asm/arch_timer.h arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h arm64: sanity checks: add missing AArch32 registers arm64: Remove unused prepare_to_copy() arm64: Correct __NR_compat_syscalls for bpf | 10 January 2015, 04:57:58 UTC |
aa92913 | Linus Torvalds | 10 January 2015, 04:51:10 UTC | Merge tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kgdb/kdb fixes from Jason Wessel: "These have been around since 3.17 and in kgdb-next for the last 9 weeks and some will go back to -stable. Summary of changes: Cleanups - kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE Fixes - kgdb/kdb: Allow access on a single core, if a CPU round up is deemed impossible, which will allow inspection of the now "trashed" kernel - kdb: Add enable mask for the command groups - kdb: access controls to restrict sensitive commands" * tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kernel/debug/debug_core.c: Logging clean-up kgdb: timeout if secondary CPUs ignore the roundup kdb: Allow access to sensitive commands to be restricted by default kdb: Add enable mask for groups of commands kdb: Categorize kdb commands (similar to SysRq categorization) kdb: Remove KDB_REPEAT_NONE flag kdb: Use KDB_REPEAT_* values as flags kdb: Rename kdb_register_repeat() to kdb_register_flags() kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags kdb: Remove currently unused kdbtab_t->cmd_flags | 10 January 2015, 04:51:10 UTC |
dc9319f | Linus Torvalds | 10 January 2015, 02:10:48 UTC | Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux Pull two nfsd bugfixes from Bruce Fields. * 'for-3.19' of git://linux-nfs.org/~bfields/linux: rpc: fix xdr_truncate_encode to handle buffer ending on page boundary nfsd: fix fi_delegees leak when fi_had_conflict returns true | 10 January 2015, 02:10:48 UTC |
20ebb34 | Linus Torvalds | 10 January 2015, 01:55:00 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two Ceph fixes from Sage Weil: "These are both pretty trivial: a sparse warning fix and size_t printk thing" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix sparse endianness warnings ceph: use %zu for len in ceph_fill_inline_data() | 10 January 2015, 01:55:00 UTC |
03c751a | Linus Torvalds | 10 January 2015, 01:46:07 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "None of these are huge, but my commit does fix a regression from 3.18 that could cause lost files during log replay. This also adds Dave Sterba to the list of Btrfs maintainers. It doesn't mean we're doing things differently, but Dave has really been helping with the maintainer workload for years" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't delay inode ref updates during log replay Btrfs: correctly get tree level in tree_backref_for_extent Btrfs: call inode_dec_link_count() on mkdir error path Btrfs: abort transaction if we don't find the block group Btrfs, scrub: uninitialized variable in scrub_extent_for_parity() Btrfs: add more maintainers | 10 January 2015, 01:46:07 UTC |
b3d574a | Linus Torvalds | 09 January 2015, 23:10:59 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed memcg: fix destination cgroup leak on task charges migration mm: memcontrol: switch soft limit default back to infinity mm/debug_pagealloc: remove obsolete Kconfig options vfs: renumber FMODE_NONOTIFY and add to uniqueness check arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file MAINTAINERS: update rydberg's addresses mm: protect set_page_dirty() from ongoing truncation mm: prevent endless growth of anon_vma hierarchy exit: fix race between wait_consider_task() and wait_task_zombie() ocfs2: remove bogus check in dlm_process_recovery_data | 09 January 2015, 23:10:59 UTC |
1e34792 | Victor Kamensky | 09 January 2015, 17:55:45 UTC | ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled image failed to compile with the following error: arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function) It seems that '80d6b0c ARM: mm: allow text and rodata sections to be read-only' and 'ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE' commits crossed. 80d6b0c uses PMD_SECT_RDONLY macro but ded9477 renames it and uses software bits L_PMD_SECT_RDONLY instead. Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded9477 does in another places. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 09 January 2015, 20:44:12 UTC |
606185b | Dan Carpenter | 09 January 2015, 12:32:31 UTC | HID: roccat: potential out of bounds in pyra_sysfs_write_settings() This is a static checker fix. We write some binary settings to the sysfs file. One of the settings is the "->startup_profile". There isn't any checking to make sure it fits into the pyra->profile_settings[] array in the profile_activated() function. I added a check to pyra_sysfs_write_settings() in both places because I wasn't positive that the other callers were correct. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 09 January 2015, 13:41:01 UTC |
a63b03e | Chris Wilson | 06 January 2015, 10:29:35 UTC | mutex: Always clear owner field upon mutex_unlock() Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only cleared iff debug_locks is active. This exposes a race to other users of the field where the mutex->owner may be still set to a stale value, potentially upsetting mutex_spin_on_owner() among others. References: https://bugs.freedesktop.org/show_bug.cgi?id=87955 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:20:39 UTC |
7f1a169 | Tetsuo Handa | 25 December 2014, 06:51:21 UTC | sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() When alloc_fair_sched_group() in sched_create_group() fails, free_sched_group() is called, and free_fair_sched_group() is called by free_sched_group(). Since destroy_cfs_bandwidth() is called by free_fair_sched_group() without calling init_cfs_bandwidth(), RCU stall occurs at hrtimer_cancel(): INFO: rcu_sched self-detected stall on CPU { 1} (t=60000 jiffies g=13074 c=13073 q=0) Task dump for CPU 1: (fprintd) R running task 0 6249 1 0x00000088 ... Call Trace: <IRQ> [<ffffffff81094988>] sched_show_task+0xa8/0x110 [<ffffffff81097acd>] dump_cpu_task+0x3d/0x50 [<ffffffff810c3a80>] rcu_dump_cpu_stacks+0x90/0xd0 [<ffffffff810c7751>] rcu_check_callbacks+0x491/0x700 [<ffffffff810cbf2b>] update_process_times+0x4b/0x80 [<ffffffff810db046>] tick_sched_handle.isra.20+0x36/0x50 [<ffffffff810db0a2>] tick_sched_timer+0x42/0x70 [<ffffffff810ccb19>] __run_hrtimer+0x69/0x1a0 [<ffffffff810db060>] ? tick_sched_handle.isra.20+0x50/0x50 [<ffffffff810ccedf>] hrtimer_interrupt+0xef/0x230 [<ffffffff810452cb>] local_apic_timer_interrupt+0x3b/0x70 [<ffffffff8164a465>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff816485bd>] apic_timer_interrupt+0x6d/0x80 <EOI> [<ffffffff810cc588>] ? lock_hrtimer_base.isra.23+0x18/0x50 [<ffffffff81193cf1>] ? __kmalloc+0x211/0x230 [<ffffffff810cc9d2>] hrtimer_try_to_cancel+0x22/0xd0 [<ffffffff81193cf1>] ? __kmalloc+0x211/0x230 [<ffffffff810ccaa2>] hrtimer_cancel+0x22/0x30 [<ffffffff810a3cb5>] free_fair_sched_group+0x25/0xd0 [<ffffffff8108df46>] free_sched_group+0x16/0x40 [<ffffffff810971bb>] sched_create_group+0x4b/0x80 [<ffffffff810aa383>] sched_autogroup_create_attach+0x43/0x1c0 [<ffffffff8107dc9c>] sys_setsid+0x7c/0x110 [<ffffffff81647729>] system_call_fastpath+0x12/0x17 Check whether init_cfs_bandwidth() was called before calling destroy_cfs_bandwidth(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [ Move the check into destroy_cfs_bandwidth() to aid compilability. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/201412252210.GCC30204.SOMVFFOtQJFLOH@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:19:00 UTC |
269ad80 | Luca Abeni | 17 December 2014, 10:50:32 UTC | sched/deadline: Avoid double-accounting in case of missed deadlines The dl_runtime_exceeded() function is supposed to ckeck if a SCHED_DEADLINE task must be throttled, by checking if its current runtime is <= 0. However, it also checks if the scheduling deadline has been missed (the current time is larger than the current scheduling deadline), further decreasing the runtime if this happens. This "double accounting" is wrong: - In case of partitioned scheduling (or single CPU), this happens if task_tick_dl() has been called later than expected (due to small HZ values). In this case, the current runtime is also negative, and replenish_dl_entity() can take care of the deadline miss by recharging the current runtime to a value smaller than dl_runtime - In case of global scheduling on multiple CPUs, scheduling deadlines can be missed even if the task did not consume more runtime than expected, hence penalizing the task is wrong This patch fix this problem by throttling a SCHED_DEADLINE task only when its runtime becomes negative, and not modifying the runtime Signed-off-by: Luca Abeni <luca.abeni@unitn.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@gmail.com> Cc: <stable@vger.kernel.org> Cc: Dario Faggioli <raistlin@linux.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1418813432-20797-3-git-send-email-luca.abeni@unitn.it Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:57 UTC |
6a503c3 | Luca Abeni | 17 December 2014, 10:50:31 UTC | sched/deadline: Fix migration of SCHED_DEADLINE tasks According to global EDF, tasks should be migrated between runqueues without checking if their scheduling deadlines and runtimes are valid. However, SCHED_DEADLINE currently performs such a check: a migration happens doing: deactivate_task(rq, next_task, 0); set_task_cpu(next_task, later_rq->cpu); activate_task(later_rq, next_task, 0); which ends up calling dequeue_task_dl(), setting the new CPU, and then calling enqueue_task_dl(). enqueue_task_dl() then calls enqueue_dl_entity(), which calls update_dl_entity(), which can modify scheduling deadline and runtime, breaking global EDF scheduling. As a result, some of the properties of global EDF are not respected: for example, a taskset {(30, 80), (40, 80), (120, 170)} scheduled on two cores can have unbounded response times for the third task even if 30/80+40/80+120/170 = 1.5809 < 2 This can be fixed by invoking update_dl_entity() only in case of wakeup, or if this is a new SCHED_DEADLINE task. Signed-off-by: Luca Abeni <luca.abeni@unitn.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@gmail.com> Cc: <stable@vger.kernel.org> Cc: Dario Faggioli <raistlin@linux.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1418813432-20797-2-git-send-email-luca.abeni@unitn.it Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:56 UTC |
32a8df4 | Yuyang Du | 19 December 2014, 00:29:56 UTC | sched: Fix odd values in effective_load() calculations In effective_load, we have (long w * unsigned long tg->shares) / long W, when w is negative, it is cast to unsigned long and hence the product is insanely large. Fix this by casting tg->shares to long. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Jones <davej@redhat.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141219002956.GA25405@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:54 UTC |
536ebe9 | Peter Zijlstra | 16 December 2014, 15:28:38 UTC | sched, fanotify: Deal with nested sleeps As per e23738a7300a ("sched, inotify: Deal with nested sleeps"). fanotify_read is a wait loop with sleeps in. Wait loops rely on task_struct::state and sleeps do too, since that's the only means of actually sleeping. Therefore the nested sleeps destroy the wait loop state and the wait loop breaks the sleep functions that assume TASK_RUNNING (mutex_lock). Fix this by using the new woken_wake_function and wait_woken() stuff, which registers wakeups in wait and thereby allows shrinking the task_state::state changes to the actual sleep part. Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Link: http://lkml.kernel.org/r/20141216152838.GZ3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:12 UTC |
5306c31 | Andi Kleen | 06 January 2015, 22:34:35 UTC | perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes There was another report of a boot failure with a #GP fault in the uncore SBOX initialization. The earlier work around was not enough for this system. The boot was failing while trying to initialize the third SBOX. This patch detects parts with only two SBOXes and limits the number of SBOX units to two there. Stable material, as it affects boot problems on 3.18. Tested-by: Andreas Oehler <andreas@oehler-net.de> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1420583675-9163-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:30 UTC |
86c269f | Andy Lutomirski | 04 January 2015, 18:36:20 UTC | perf/x86_64: Improve user regs sampling Perf reports user regs for kernel-mode samples so that samples can be backtraced through user code. The old code was very broken in syscall context, resulting in useless backtraces. The new code, in contrast, is still dangerously racy, but it should at least work most of the time. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: chenggang.qcg@taobao.com Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/243560c26ff0f739978e2459e203f6515367634d.1420396372.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:29 UTC |
88a7c26 | Andy Lutomirski | 04 January 2015, 18:36:19 UTC | perf: Move task_pt_regs sampling into arch code On x86_64, at least, task_pt_regs may be only partially initialized in many contexts, so x86_64 should not use it without extra care from interrupt context, let alone NMI context. This will allow x86_64 to override the logic and will supply some scratch space to use to make a cleaner copy of user regs. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: chenggang.qcg@taobao.com Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/e431cd4c18c2e1c44c774f10758527fb2d1025c4.1420396372.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:28 UTC |
0f363b2 | Peter Zijlstra | 16 December 2014, 10:46:14 UTC | x86: Fix off-by-one in instruction decoder Stephane reported that the PEBS fixup was broken by the recent commit to the instruction decoder. The thing had an off-by-one which resulted in not being able to decode the last instruction and always bail. Reported-by: Stephane Eranian <eranian@google.com> Fixes: 6ba48ff46f76 ("x86: Remove arbitrary instruction size limit in instruction decoder") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org # 3.18 Cc: <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Liang Kan <kan.liang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20141216104614.GV3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:26 UTC |
300176a | Ingo Molnar | 09 January 2015, 10:04:13 UTC | Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Free callchains when hist entries are deleted, plugging a massive leak in 'top -g', where hist_entries (and its callchains) are decayed over time. (Namhyung Kim) - Fix segfault when showing callchain in the hists browser (report & top) (Namhyung Kim) - Fix children sort key behavior, and also the 'perf test 32' test that was failing due to reliance on undefined behaviour (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:04:13 UTC |
9e5e366 | Vlastimil Babka | 08 January 2015, 22:32:40 UTC | mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
4bdfc1c | Vladimir Davydov | 08 January 2015, 22:32:37 UTC | memcg: fix destination cgroup leak on task charges migration We are supposed to take one css reference per each memory page and per each swap entry accounted to a memory cgroup. However, during task charges migration we take a reference to the destination cgroup twice per each swap entry: first in mem_cgroup_do_precharge()->try_charge() and then in mem_cgroup_move_swap_account(), permanently leaking the destination cgroup. The hunk taking the second reference seems to be a leftover from the pre-00501b531c472 ("mm: memcontrol: rewrite charge API") era. Remove it to fix the leak. Fixes: e8ea14cc6ead (mm: memcontrol: take a css reference for each charged page) Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
24d404d | Johannes Weiner | 08 January 2015, 22:32:35 UTC | mm: memcontrol: switch soft limit default back to infinity Commit 3e32cb2e0a12 ("mm: memcontrol: lockless page counters") accidentally switched the soft limit default from infinity to zero, which turns all memcgs with even a single page into soft limit excessors and engages soft limit reclaim on all of them during global memory pressure. This makes global reclaim generally more aggressive, but also inverts the meaning of existing soft limit configurations where unset soft limits are usually more generous than set ones. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
70ecb3c | Joonsoo Kim | 08 January 2015, 22:32:32 UTC | mm/debug_pagealloc: remove obsolete Kconfig options These are obsolete since commit e30825f1869a ("mm/debug-pagealloc: prepare boottime configurable") was merged. So remove them. [pebolle@tiscali.nl: find obsolete Kconfig options] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
75069f2 | David Drysdale | 08 January 2015, 22:32:29 UTC | vfs: renumber FMODE_NONOTIFY and add to uniqueness check Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc. The clashing O_PATH value was added in commit 5229645bdc35 ("vfs: add nonconflicting values for O_PATH") but this can't be changed as it is user-visible. FMODE_NONOTIFY is only used internally in the kernel, but it is in the same numbering space as the other O_* flags, as indicated by the comment at the top of include/uapi/asm-generic/fcntl.h (and its use in fs/notify/fanotify/fanotify_user.c). So renumber it to avoid the clash. All of this has happened before (commit 12ed2e36c98a: "fanotify: FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will happen again -- so update the uniqueness check in fcntl_init() to include __FMODE_NONOTIFY. Signed-off-by: David Drysdale <drysdale@google.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jan Kara <jack@suse.cz> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
9de93e7 | Oleg Nesterov | 08 January 2015, 22:32:26 UTC | arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h build error arch/blackfin/mach-bf533/boards/stamp.c:834:2: error: implicit declaration of function 'mdelay' Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
53dc20b | Xue jiufei | 08 January 2015, 22:32:23 UTC | ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file In ocfs2_link(), the parent directory inode passed to function ocfs2_lookup_ino_from_name() is wrong. Parameter dir is the parent of new_dentry not old_dentry. We should get old_dir from old_dentry and lookup old_dentry in old_dir in case another node remove the old dentry. With this change, hard linking works again, when paths are relative with at least one subdirectory. This is how the problem was reproducable: # mkdir a # mkdir b # touch a/test # ln a/test b/test ln: failed to create hard link `b/test' => `a/test': No such file or directory However when creating links in the same dir, it worked well. Now the link gets created. Fixes: 0e048316ff57 ("ocfs2: check existence of old dentry in ocfs2_link()") Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reported-by: Szabo Aron - UBIT <aron@ubit.hu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Tested-by: Aron Szabo <aron@ubit.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
75dd112 | Henrik Rydberg | 08 January 2015, 22:32:21 UTC | MAINTAINERS: update rydberg's addresses My ISP finally gave up on the old mail address, so I am moving things over to bitmath.org instead. Also change the status fields to better reflect reality. Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
2d6d7f9 | Johannes Weiner | 08 January 2015, 22:32:18 UTC | mm: protect set_page_dirty() from ongoing truncation Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
7a3ef20 | Konstantin Khlebnikov | 08 January 2015, 22:32:15 UTC | mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
3245d6a | Oleg Nesterov | 08 January 2015, 22:32:12 UTC | exit: fix race between wait_consider_task() and wait_task_zombie() wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE change in between, gcc needs to reload p->exit_state after security_task_wait(). In this case ->notask_error will be wrongly cleared and do_wait() can hang forever if it was the last eligible child. Many thanks to Arne who carefully investigated the problem. Note: this bug is very old but it was pure theoretical until commit b3ab03160dfa ("wait: completely ignore the EXIT_DEAD tasks"). Before this commit "-O2" was probably enough to guarantee that compiler won't read ->exit_state twice. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Arne Goedeke <el@laramies.com> Tested-by: Arne Goedeke <el@laramies.com> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
eb4f73b | Joseph Qi | 08 January 2015, 22:32:09 UTC | ocfs2: remove bogus check in dlm_process_recovery_data In dlm_process_recovery_data, only when dlm_new_lock failed the ret will be set to -ENOMEM. And in this case, newlock is definitely NULL. So test newlock is meaningless, remove it. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:51 UTC |
11c8f01 | Linus Torvalds | 08 January 2015, 22:35:00 UTC | Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "make mrproper / distclean stopped removing the generated debian/ directory in v3.16. This fixes it" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix removal of the debian/ directory | 08 January 2015, 22:35:00 UTC |
90ac086 | Michal Marek | 08 January 2015, 15:16:39 UTC | Makefile: include arch/*/include/generated/uapi before .../generated The introduction of the uapi directories in v3.7-rc1 moved some of the generated headers from arch/*/include/generated to the uapi directory, keeping the #include directives intact. This creates a problem when bisecting, because the unversioned files are not cleaned automatically by git and the compiler might include stale headers as a result. Instead of cleaning them in the Makefiles, promote arch/*/include/generated/uapi in the search path. Under normal circumstances, there is no overlap between this uapi subdirectory and its parent, so the include choices remain the same. We keep arch/*/include/generated/uapi in the USERINCLUDE variable so that it is usable standalone. Note that we cannot completely swap the order of the uapi and kernel-only directories, since the headers in include/uapi/asm-generic are meant to be wrapped by their include/asm-generic counterparts when building kernel code. Reported-by: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Reported-by: David Drysdale <dmd@lurklurk.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 22:24:54 UTC |
c4ccac4 | Linus Torvalds | 08 January 2015, 22:19:44 UTC | Merge tag 'pinctrl-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Allright allright I've been lazy over christmas and New Years. Here are a few collected pin control fixes eventually. Details: A set of assorted pin control fixes for the Rockchip and STi drivers" * tag 'pinctrl-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: st: Add irq_disable hook to st_gpio_irqchip pinctrl: st: avoid multiple mutex lock pinctrl: rockchip: Fix enable/disable/mask/unmask pinctrl: rockchip: Handle wakeup pins | 08 January 2015, 22:19:44 UTC |
74e59ea | Linus Torvalds | 08 January 2015, 22:11:03 UTC | Merge tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are an ACPI device power management initialization fix (-stable material), two commits renaming stuff in the ACPI processor driver to make it more suitable for ARM64 processors and a new ACPI backlight blacklist entry. Specifics: - Fix ACPI power management intialization for device objects corresponding to devices that are not present at the init time (the _STA control method returns 0 for them) and therefore should not be regarded as power manageable (Rafael J Wysocki). - Rename a structure field and two functions used by the ACPI processor driver to make them less tied to architectures that use APICs (both x86 and ia64) and more suitable for ARM64 processors (Hanjun Guo). - Add a disable_native_backlight quirk for Dell XPS15 L521X designed in an unusual way preventing native backlight from working on that machine (Hans de Goede)" * tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu() ACPI / processor: Convert apic_id to phys_id to make it arch agnostic ACPI / PM: Fix PM initialization for devices that are not present | 08 January 2015, 22:11:03 UTC |
086b2a9 | Linus Torvalds | 08 January 2015, 21:52:16 UTC | Merge tag 'keys-fixes-20150107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyrings fixes from David Howells: "Two fixes: - Fix for the order in which things are done during key garbage collection to prevent named keyrings causing a crash [CVE-2014-9529]. - Fix assoc_array to explicitly #include rcupdate.h to prevent compilation errors under certain circumstances" * tag 'keys-fixes-20150107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: assoc_array: Include rcupdate.h for call_rcu() definition KEYS: close race between key lookup and freeing | 08 January 2015, 21:52:16 UTC |
b11ecb2 | Linus Torvalds | 08 January 2015, 21:05:56 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost pull virtio/vhost fixes from Michael Tsirkin: "This fixes a couple of bugs triggered by hot-unplug of virtio devices, as well as a regression in vhost-net" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/net: length miscalculation virtio_pci: document why we defer kfree virtio_pci: defer kfree until release callback virtio_pci: device-specific release callback virtio: make del_vqs idempotent | 08 January 2015, 21:05:56 UTC |
1c16938 | Linus Torvalds | 08 January 2015, 20:07:34 UTC | Merge tag 'iommu-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Including: - a domain structure leak fix in the Intel VT-d driver - compile error fix for the VMSA IPMMU driver because of the IOMMU_EXEC -> IOMMU_NOEXEC conversion - two small cleanups as an aftermath of the merge window and the domain-leak fix" * tag 'iommu-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/rockchip: Drop owner assignment from platform_drivers iommu/vt-d: Remove dead code in device_notifier iommu/vt-d: Fix dmar_domain leak in iommu_attach_device iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXEC | 08 January 2015, 20:07:34 UTC |
716c13a | Linus Torvalds | 08 January 2015, 19:33:51 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a build problem with sha-mb with old toolchains and an implementation bug in the ctr(aes)/by8 branch of aesni-intel that's enabled when AVX is available" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha-mb - Add avx2_supported check. crypto: aesni - fix "by8" variant for 128 bit keys | 08 January 2015, 19:33:51 UTC |
d7d5a00 | Ilya Dryomov | 19 December 2014, 11:00:41 UTC | libceph: fix sparse endianness warnings The only real issue is the one in auth_x.c and it came with 3.19-rc1 merge. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> | 08 January 2015, 17:36:57 UTC |
0668ff5 | Ilya Dryomov | 19 December 2014, 10:10:10 UTC | ceph: use %zu for len in ceph_fill_inline_data() len is size_t, should be printed with %zu. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> | 08 January 2015, 17:36:56 UTC |
c09e31c | Namhyung Kim | 24 December 2014, 06:04:36 UTC | perf hists browser: Fix segfault when showing callchain When perf report on TUI shows callchain it checks first node has siblings to determine whether it needs to print percentage value. But it missed a case that first node is NULL. So sometimes it segfaults like below: $ perf top -g perf: Segmentation fault -------- backtrace -------- perf[0x4fcefb] /usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20] perf(rb_next+0x8)[0x47d3d8] perf[0x4f6058] perf[0x4f833b] perf[0x4f8610] perf[0x4f209e] perf(ui_browser__run+0x3a)[0x4f2e6a] perf[0x4f94ee] perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4] perf[0x444d10] /usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314] /usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd] $ addr2line -e `which perf` 0x4f6058 /home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553 I don't know why the backtrace didn't print some symbols.. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Fixes: 4087d11cd945 ("perf hists browser: Print overhead percent value for first-level callchain") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1419401076-21700-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 08 January 2015, 14:59:16 UTC |
d114960 | Namhyung Kim | 30 December 2014, 05:38:13 UTC | perf callchain: Free callchains when hist entries are deleted Markus reported that "perf top -g" can leak ~300MB per second on his machine. This is partly because it missed to free callchains when hist entries are deleted. Fix it. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 08 January 2015, 14:56:35 UTC |
5ca8271 | Namhyung Kim | 23 December 2014, 04:36:21 UTC | perf hists: Fix children sort key behavior When perf report --children resorts output fields, it tries to put caller above the callee. But this was only meaningful for a same thread and doing this requires callchain enabled. So fix its check before comparing the callchain depth. This also changes the hist accumulation tests: In test 3, xmalloc in bash thread should be above than other perf threads due to alphabetical order of comm string. Also it's under page_fault in bash thread since alphabetical order of dso name. The sys_perf_event_open in perf thread is put on the last line since it's self overhead is 0. In test 4, the sys_perf_event_open is put above other perf entries that have same children overhead since its callchain depth is smaller. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 08 January 2015, 14:26:56 UTC |
0e63ea4 | Ard Biesheuvel | 08 January 2015, 09:54:58 UTC | arm64/efi: add missing call to early_ioremap_reset() The early ioremap support introduced by patch bf4b558eba92 ("arm64: add early_ioremap support") failed to add a call to early_ioremap_reset() at an appropriate time. Without this call, invocations of early_ioremap etc. that are done too late will go unnoticed and may cause corruption. This is exactly what happened when the first user of this feature was added in patch f84d02755f5a ("arm64: add EFI runtime services"). The early mapping of the EFI memory map is unmapped during an early initcall, at which time the early ioremap support is long gone. Fix by adding the missing call to early_ioremap_reset() to setup_arch(), and move the offending early_memunmap() to right after the point where the early mapping of the EFI memory map is last used. Fixes: f84d02755f5a ("arm64: add EFI runtime services") Cc: <stable@vger.kernel.org> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> | 08 January 2015, 11:57:04 UTC |
ed9eb84 | Ingo Molnar | 08 January 2015, 07:59:22 UTC | Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: " - 'perf probe' should fall back to find probe point in symbols when failing to do so in a debuginfo file (Masami Hiramatsu) - Fix 'perf probe' crash in dwarf_getcfi_elf (Namhyung Kim) - Fix shell completion with 'perf list' --raw-dump option (Taesoo Kim) - Fix 'perf diff' to sort by baseline field by default (Namhyung Kim) " Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 08 January 2015, 07:59:22 UTC |
79305ec | Dave Airlie | 08 January 2015, 00:36:37 UTC | Merge tag 'amdkfd-fixes-2015-01-06' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Complete overhaul to the main IOCTL function, kfd_ioctl(), according to drm_ioctl() example. This includes changing the IOCTL definitions, so it breaks compatibility with previous versions of the userspace. However, because the kernel was not officialy released yet, and this the first kernel that includes amdkfd, I assume I can still do that at this stage. - A couple of bug fixes for the non-HWS path (used for bring-ups and debugging purposes only). * tag 'amdkfd-fixes-2015-01-06' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Assign VMID to PASID for IH in non-HWS mode drm/radeon: do not leave queue acquired if timeout happens in kgd_hqd_destroy() drm/amdkfd: Load mqd to hqd in non-HWS mode drm/amd: Fixing typos in kfd<->kgd interface | 08 January 2015, 00:36:37 UTC |
eaee8ec | Dave Airlie | 08 January 2015, 00:19:59 UTC | Merge branch 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes some minor radeon fixes. * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2) | 08 January 2015, 00:19:59 UTC |
f662488 | Dave Airlie | 08 January 2015, 00:19:24 UTC | Merge branch 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes - Fix BUG() on !SMP builds - Fix for OOPS on pre-NV50 that snuck into -next - MCP7[789A] hang fix where firmware hasn't already setup NISO pollers - NV4x IGP MSI disable, it doesn't appear to work correctly - Add GK208B to recognised boards (no code change aside from adding chipset recognition) * 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets | 08 January 2015, 00:19:24 UTC |
ac08468 | Grygorii Strashko | 23 December 2014, 18:36:55 UTC | ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region Now local variables kernel_x_start and kernel_x_end defined using 'unsigned long' type which is wrong because they represent physical memory range and will be calculated wrongly if LPAE is enabled. As result, all following code in map_lowmem() will not work correctly. For example, Keystone 2 boot is broken because kernel_x_start == 0x0000 0000 kernel_x_end == 0x0080 0000 instead of kernel_x_start == 0x0000 0008 0000 0000 kernel_x_end == 0x0000 0008 0080 0000 and as result whole low memory will be mapped with MT_MEMORY_RW permissions by code (start > kernel_x_end): } else if (start >= kernel_x_end) { map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); map.length = end - start; map.type = MT_MEMORY_RW; create_mapping(&map); } Hence, fix it by using phys_addr_t type for variables kernel_x_start and kernel_x_end. Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 January 2015, 20:33:34 UTC |
cca547e | Mark Rutland | 17 December 2014, 16:57:38 UTC | ARM: 8249/1: mm: dump: don't skip regions Currently the arm page table dumping code starts dumping page tables from USER_PGTABLES_CEILING. This is unnecessary for skipping any entries related to userspace as the swapper_pg_dir does not contain such entries, and results in a couple of unfortuante side effects. Firstly, any kernel mappings which might exist below USER_PGTABLES_CEILING will not be accounted in the dump output. This masks any entries erroneously created below this address. Secondly, if the final page table entry walked is part of a valid mapping the page table dumping code will not log the region this entry is part of, as the final note_page call in walk_pgd will trigger an early return when 0 < USER_PGTABLES_CEILING. Luckily this isn't seen on contemporary systems as they typically don't have enough RAM to extend the linear mapping right to the end of the address space. Due to the way addr is constructed in the walk_* functions, it can never be less than USER_PGTABLES_CEILING when walking the page tables, so it is not necessary to avoid dereferencing invalid table addresses. The existing checks for st->current_prot and st->marker[1].start_address are sufficient to ensure we will not print and/or dereference garbage when trying to log information. This patch removes both problematic uses of USER_PGTABLES_CEILING from the arm page table dumping code, preventing both of these issues. We will now report any low mappings, and the final note_page call will not return early, ensuring all regions are logged. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 January 2015, 20:33:33 UTC |
841ee23 | Russell King | 18 December 2014, 19:43:36 UTC | ARM: wire up execveat syscall Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 07 January 2015, 20:31:54 UTC |
49a068f | J. Bruce Fields | 22 December 2014, 21:14:51 UTC | rpc: fix xdr_truncate_encode to handle buffer ending on page boundary A struct xdr_stream at a page boundary might point to the end of one page or the beginning of the next, but xdr_truncate_encode isn't prepared to handle the former. This can cause corruption of NFSv4 READDIR replies in the case that a readdir entry that would have exceeded the client's dircount/maxcount limit would have ended exactly on a 4k page boundary. You're more likely to hit this case on large directories. Other xdr_truncate_encode callers are probably also affected. Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Fixes: 3e19ce762b53 "rpc: xdr_truncate_encode" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 07 January 2015, 19:03:58 UTC |
94ae1db | Jeff Layton | 13 December 2014, 14:11:39 UTC | nfsd: fix fi_delegees leak when fi_had_conflict returns true Currently, nfs4_set_delegation takes a reference to an existing delegation and then checks to see if there is a conflict. If there is one, then it doesn't release that reference. Change the code to take the reference after the check and only if there is no conflict. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 07 January 2015, 18:38:21 UTC |
7c2e211 | Wei Yang | 07 January 2015, 17:29:11 UTC | vfio-pci: Fix the check on pci device type in vfio_pci_probe() Current vfio-pci just supports normal pci device, so vfio_pci_probe() will return if the pci device is not a normal device. While current code makes a mistake. PCI_HEADER_TYPE is the offset in configuration space of the device type, but we use this value to mask the type value. This patch fixs this by do the check directly on the pci_dev->hdr_type. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org # v3.6+ | 07 January 2015, 17:29:11 UTC |
990428b | Pranith Kumar | 30 December 2014, 05:46:21 UTC | assoc_array: Include rcupdate.h for call_rcu() definition Include rcupdate.h header to provide call_rcu() definition. This was implicitly being provided by slab.h file which include srcu.h somewhere in its include hierarchy which in-turn included rcupdate.h. Lately, tinification effort added support to remove srcu entirely because of which we are encountering build errors like lib/assoc_array.c: In function 'assoc_array_apply_edit': lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Fix these by including rcupdate.h explicitly. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reported-by: Scott Wood <scottwood@freescale.com> | 07 January 2015, 16:08:41 UTC |
92cb465 | Takashi Sakamoto | 07 January 2015, 15:31:16 UTC | ALSA: fireworks: fix an endianness bug for transaction length Although the 't->length' is a big-endian value, it's used without any conversion. This means that the driver always uses 'length' parameter. Fixes: 555e8a8f7f14("ALSA: fireworks: Add command/response functionality into hwdep interface") Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 January 2015, 15:39:21 UTC |
59c6832 | Paul Walmsley | 06 January 2015, 00:38:42 UTC | arm64: fix missing asm/io.h include in kernel/smp_spin_table.c On next-20150105, defconfig compilation breaks with: arch/arm64/kernel/smp_spin_table.c:80:2: error: implicit declaration of function ‘ioremap_cache’ [-Werror=implicit-function-declaration] arch/arm64/kernel/smp_spin_table.c:92:2: error: implicit declaration of function ‘writeq_relaxed’ [-Werror=implicit-function-declaration] arch/arm64/kernel/smp_spin_table.c:101:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] Fix by including asm/io.h, which contains definitions or prototypes for these macros or functions. This second version incorporates a comment from Mark Rutland <mark.rutland@arm.com> to keep the includes in alphabetical order by filename. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:59 UTC |
2c2b282 | Paul Walmsley | 06 January 2015, 00:38:41 UTC | arm64: fix missing asm/alternative.h include in kernel/module.c On next-20150105, defconfig compilation breaks with: arch/arm64/kernel/module.c:408:4: error: implicit declaration of function ‘apply_alternatives’ [-Werror=implicit-function-declaration] Fix by including asm/alternative.h, where the apply_alternatives() prototype is declared. This second version incorporates a comment from Mark Rutland <mark.rutland@arm.com> to keep the includes in alphabetical order by filename. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:59 UTC |
082471a | Paul Walmsley | 06 January 2015, 00:38:41 UTC | arm64: fix missing linux/bug.h include in asm/arch_timer.h On next-20150105, defconfig compilation breaks with: ./arch/arm64/include/asm/arch_timer.h:112:2: error: implicit declaration of function ‘BUG’ [-Werror=implicit-function-declaration] Fix by including linux/bug.h, where the BUG macro is defined. This second version incorporates a comment from Mark Rutland <mark.rutland@arm.com> to keep the includes in alphabetical order by filename. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:59 UTC |
2ec4560 | Paul Walmsley | 06 January 2015, 00:38:41 UTC | arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h On next-20150105, defconfig compilation breaks with: ./arch/arm64/include/asm/processor.h:47:32: error: ‘PHYS_MASK’ undeclared (first use in this function) Fix by including asm/pgtable-hwdef.h, where PHYS_MASK is defined. This second version incorporates a comment from Mark Rutland <mark.rutland@arm.com> to keep the includes in alphabetical order by filename. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:58 UTC |
80639d4 | Mark Rutland | 07 January 2015, 10:31:56 UTC | arm64: sanity checks: add missing AArch32 registers We don't currently check a number of registers exposed to AArch32 guests (MVFR{0,1,2}_EL1 and ID_DFR0_EL1), despite the fact these describe AArch32 feature support exposed to userspace and KVM guests similarly to AArch64 registers which we do check. We do not expect these registers to vary across a set of CPUs. This patch adds said registers to the cpuinfo framework and sanity checks. No sanity check failures have been observed on a current ARMv8 big.LITTLE platform (Juno). Cc: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:58 UTC |
3efcb7a | Tobias Klauser | 05 January 2015, 14:23:48 UTC | arm64: Remove unused prepare_to_copy() prepare_to_copy() was removed from all architectures supported at that time in commit 55ccf3fe3f9a ("fork: move the real prepare_to_copy() users to arch_dup_task_struct()"). Remove it from arm64 as well. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:58 UTC |
0f9132c | Mark Rutland | 05 January 2015, 12:24:47 UTC | arm64: Correct __NR_compat_syscalls for bpf Commit 97b56be10352a70c (arm64: compat: Enable bpf syscall) made the usual mistake of forgetting to update __NR_compat_syscalls. Due to this, when el0_sync_compat calls el0_svc_naked, the test against sc_nr (__NR_compat_syscalls) will fail, and we'll call ni_sys, returning -ENOSYS to userspace. This patch bumps __NR_compat_syscalls appropriately, enabling the use of the bpf syscall from compat tasks. Due to the reorganisation of unistd{,32}.h as part of commit f3e5c847ec3d12b4 (arm64: Add __NR_* definitions for compat syscalls) it is not currently possible to include both headers and sanity-check the value of __NR_compat_syscalls at build-time to prevent this from happening again. Additional rework is required to make such niceties a possibility. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> | 07 January 2015, 11:40:58 UTC |
99975cc | Michael S. Tsirkin | 07 January 2015, 08:51:00 UTC | vhost/net: length miscalculation commit 8b38694a2dc8b18374310df50174f1e4376d6824 vhost/net: virtio 1.0 byte swap had this chunk: - heads[headcount - 1].len += datalen; + heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen); This adds datalen with the wrong sign, causing guest panics. Fixes: 8b38694a2dc8b18374310df50174f1e4376d6824 Reported-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 07 January 2015, 10:22:00 UTC |
fce7fcc | Patrice CHOTARD | 05 January 2015, 10:04:14 UTC | pinctrl: st: Add irq_disable hook to st_gpio_irqchip Currently disable_irq() doesn't work for pinctrl-st driver, due to missing irq_disable hook in the driver. disable_irq() is required only for level-triggered interrupts, which is not the case normally. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 07 January 2015, 09:44:39 UTC |
96d16c3 | Francesco VIRLINZI | 05 January 2015, 10:04:13 UTC | pinctrl: st: avoid multiple mutex lock Using the sysfs inteface to inspect the pins configuration the system can walk around a path which acquires the same mutex twice. On STiH407 platform, for example : cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins hangs the kernel and never returns. With this patch the mutex is temporary freed. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 07 January 2015, 09:43:41 UTC |
60834b7 | Aaron Plattner | 06 January 2015, 21:40:14 UTC | ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda Vendor ID 0x10de0072 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 January 2015, 06:55:42 UTC |
bdec419 | Linus Torvalds | 07 January 2015, 01:48:14 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Just a pile of random fixes, including: 1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu. 2) MDI{,X} eeprom check in e100 driver is reversed, from John W. Linville. 3) Missing error return assignments in several ethernet drivers, from Julia Lawall. 4) Altera TSE device doesn't come back up after ifconfig down/up sequence, fix from Kostya Belezko. 5) Add more cases to the check for whether the qmi_wwan device has a bogus MAC address and needs to be assigned a random one. From Kristian Evensen. 6) Fix interrupt hangs in CPSW, from Felipe Balbi. 7) Implement ndo_features_check in r8152 so that the stack doesn't feed GSO packets which are outside of the chip's capabilities. From Hayes Wang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) qla3xxx: don't allow never end busy loop xen-netback: fixing the propagation of the transmit shaper timeout r8152: support ndo_features_check batman-adv: fix potential TT client + orig-node memory leak batman-adv: fix multicast counter when purging originators batman-adv: fix counter for multicast supporting nodes batman-adv: fix lock class for decoding hash in network-coding.c batman-adv: fix delayed foreign originator recognition batman-adv: fix and simplify condition when bonding should be used Revert "mac80211: Fix accounting of the tailroom-needed counter" net: ethernet: cpsw: fix hangs with interrupts enic: free all rq buffs when allocation fails qmi_wwan: Set random MAC on devices with buggy fw openvswitch: Consistently include VLAN header in flow and port stats. tcp: Do not apply TSO segment limit to non-TSO packets Altera TSE: Add missing phydev net/mlx4_core: Fix error flow in mlx4_init_hca() net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow qlcnic: Fix return value in qlcnic_probe() net: axienet: fix error return code ... | 07 January 2015, 01:48:14 UTC |
0adc180 | Linus Torvalds | 07 January 2015, 01:39:31 UTC | Merge tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi Pull IPMI fixlet from Corey Minyard: "Fix a compile warning" * tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile warning with tv_usec | 07 January 2015, 01:39:31 UTC |
2abad79 | Andy Shevchenko | 06 January 2015, 21:17:53 UTC | qla3xxx: don't allow never end busy loop The counter variable wasn't increased at all which may stuck under certain circumstances. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2015, 22:41:36 UTC |
794c3a0 | Rafael J. Wysocki | 06 January 2015, 22:35:43 UTC | Merge branches 'acpi-pm', 'acpi-processor' and 'acpi-video' * acpi-pm: ACPI / PM: Fix PM initialization for devices that are not present * acpi-processor: ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu() ACPI / processor: Convert apic_id to phys_id to make it arch agnostic * acpi-video: ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X | 06 January 2015, 22:35:43 UTC |
6a3ef10 | Hans de Goede | 05 January 2015, 07:57:04 UTC | ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X The L521X variant of the Dell XPS15 has integrated nvidia graphics, and backlight control does not work properly when using the native interfaces. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1163574 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 January 2015, 22:34:48 UTC |
3b421b8 | Linus Torvalds | 06 January 2015, 22:05:40 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Revert a potential seek_data/hole regression which shows up when using ext4 to handle ext3 file systems, plus two minor bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove spurious KERN_INFO from ext4_warning call Revert "ext4: fix suboptimal seek_{data,hole} extents traversial" ext4: prevent online resize with backup superblock | 06 January 2015, 22:05:40 UTC |
fee7e49 | Linus Torvalds | 06 January 2015, 21:00:05 UTC | mm: propagate error from stack expansion even for guard page Jay Foad reports that the address sanitizer test (asan) sometimes gets confused by a stack pointer that ends up being outside the stack vma that is reported by /proc/maps. This happens due to an interaction between RLIMIT_STACK and the guard page: when we do the guard page check, we ignore the potential error from the stack expansion, which effectively results in a missing guard page, since the expected stack expansion won't have been done. And since /proc/maps explicitly ignores the guard page (commit d7824370e263: "mm: fix up some user-visible effects of the stack guard page"), the stack pointer ends up being outside the reported stack area. This is the minimal patch: it just propagates the error. It also effectively makes the guard page part of the stack limit, which in turn measn that the actual real stack is one page less than the stack limit. Let's see if anybody notices. We could teach acct_stack_growth() to allow an extra page for a grow-up/grow-down stack in the rlimit test, but I don't want to add more complexity if it isn't needed. Reported-and-tested-by: Jay Foad <jay.foad@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 January 2015, 21:00:05 UTC |
627d2cc | David S. Miller | 06 January 2015, 19:24:49 UTC | Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge Included changes: - ensure bonding is used (if enabled) for packets coming in the soft interface - fix race condition to avoid orig_nodes to be deleted right after being added - avoid false positive lockdep splats by assigning lockclass to the proper hashtable lock objects - avoid miscounting of multicast 'disabled' nodes in the network - fix memory leak in the Global Translation Table in case of originator interval change Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2015, 19:24:49 UTC |
07ff890 | Palik, Imre | 06 January 2015, 15:44:44 UTC | xen-netback: fixing the propagation of the transmit shaper timeout Since e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct"), the transimt shaper timeout is always set to 0. The value the user sets via xenbus is never propagated to the transmit shaper. This patch fixes the issue. Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Imre Palik <imrep@amazon.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2015, 19:17:37 UTC |
15ecf7a | David S. Miller | 06 January 2015, 18:29:27 UTC | Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Here's just a single fix - a revert of a patch that broke the p54 and cw2100 drivers (arguably due to bad assumptions there.) Since this affects kernels since 3.17, I decided to revert for now and we'll revisit this optimisation properly for -next. Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2015, 18:29:27 UTC |
a5e3125 | hayeswang | 06 January 2015, 09:41:58 UTC | r8152: support ndo_features_check Support ndo_features_check to avoid: - the transport offset is more than the hw limitation when using hw checksum. - the skb->len of a GSO packet is more than the limitation. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2015, 18:29:13 UTC |
76baee6 | Oded Gabbay | 29 December 2014, 12:20:05 UTC | drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() This patch changes kfd_ioctl() to be very similar to drm_ioctl(). The patch defines an array of amdkfd_ioctls, which maps IOCTL definition to the ioctl function. The kfd_ioctl() uses that mapping to call the appropriate ioctl function, through a function pointer. This patch also declares a new typedef for the ioctl function pointer. v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_... Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Acked-by: Christian König <christian.koenig@amd.com> | 06 January 2015, 17:44:36 UTC |
b81c55d | Oded Gabbay | 29 December 2014, 13:24:25 UTC | drm/amdkfd: reformat IOCTL definitions to drm-style This patch reformats the ioctl definitions in kfd_ioctl.h to be similar to the drm ioctls definition style. v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_... Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Acked-by: Christian König <christian.koenig@amd.com> | 06 January 2015, 17:44:36 UTC |
524a640 | Oded Gabbay | 29 December 2014, 11:52:22 UTC | drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() This patch moves the copy_to_user() and copy_from_user() calls from the different ioctl functions in amdkfd to the general kfd_ioctl() function, as this is a common code for all ioctls. This was done according to example taken from drm_ioctl.c Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> | 06 January 2015, 17:44:26 UTC |
a1eb03f | Michael S. Tsirkin | 04 January 2015, 15:28:27 UTC | virtio_pci: document why we defer kfree The reason we defer kfree until release function is because it's a general rule for kobjects: kfree of the reference counter itself is only legal in the release function. Previous patch didn't make this clear, document this in code. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 06 January 2015, 14:35:36 UTC |