Revision 2f3b28f27234a0130583131a6785c44e3dd1cac4 authored by Johannes Schindelin on 09 March 2023, 22:08:47 UTC, committed by Johannes Schindelin on 17 April 2023, 19:15:37 UTC
The `maint-2.30` branch accumulated quite a few fixes over the past two years. Most of those fixes were originally based on newer versions, and while the patches cherry-picked cleanly, we weren't diligent enough to pay attention to the CI builds and the GETTEXT_POISON job regressed. This topic branch fixes that. * js/gettext-poison-fixes t0033: GETTEXT_POISON fix t0003: GETTEXT_POISON fix, part 1 t0003: GETTEXT_POISON fix, conclusion t5619: GETTEXT_POISON fix t5604: GETTEXT_POISON fix, part 1 t5604: GETTEXT_POISON fix, conclusion
t7610-mergetool.sh
#!/bin/sh
#
# Copyright (c) 2008 Charles Bailey
#
test_description='git mergetool
Testing basic merge tool invocation'
. ./test-lib.sh
# All the mergetool test work by checking out a temporary branch based
# off 'branch1' and then merging in master and checking the results of
# running mergetool
test_expect_success 'setup' '
test_config rerere.enabled true &&
echo master >file1 &&
echo master spaced >"spaced name" &&
echo master file11 >file11 &&
echo master file12 >file12 &&
echo master file13 >file13 &&
echo master file14 >file14 &&
mkdir subdir &&
echo master sub >subdir/file3 &&
test_create_repo submod &&
(
cd submod &&
: >foo &&
git add foo &&
git commit -m "Add foo"
) &&
git submodule add git://example.com/submod submod &&
git add file1 "spaced name" file1[1-4] subdir/file3 .gitmodules submod &&
git commit -m "add initial versions" &&
git checkout -b branch1 master &&
git submodule update -N &&
echo branch1 change >file1 &&
echo branch1 newfile >file2 &&
echo branch1 spaced >"spaced name" &&
echo branch1 both added >both &&
echo branch1 change file11 >file11 &&
echo branch1 change file13 >file13 &&
echo branch1 sub >subdir/file3 &&
(
cd submod &&
echo branch1 submodule >bar &&
git add bar &&
git commit -m "Add bar on branch1" &&
git checkout -b submod-branch1
) &&
git add file1 "spaced name" file11 file13 file2 subdir/file3 submod &&
git add both &&
git rm file12 &&
git commit -m "branch1 changes" &&
git checkout -b delete-base branch1 &&
mkdir -p a/a &&
test_write_lines one two 3 4 >a/a/file.txt &&
git add a/a/file.txt &&
git commit -m"base file" &&
git checkout -b move-to-b delete-base &&
mkdir -p b/b &&
git mv a/a/file.txt b/b/file.txt &&
test_write_lines one two 4 >b/b/file.txt &&
git commit -a -m"move to b" &&
git checkout -b move-to-c delete-base &&
mkdir -p c/c &&
git mv a/a/file.txt c/c/file.txt &&
test_write_lines one two 3 >c/c/file.txt &&
git commit -a -m"move to c" &&
git checkout -b stash1 master &&
echo stash1 change file11 >file11 &&
git add file11 &&
git commit -m "stash1 changes" &&
git checkout -b stash2 master &&
echo stash2 change file11 >file11 &&
git add file11 &&
git commit -m "stash2 changes" &&
git checkout master &&
git submodule update -N &&
echo master updated >file1 &&
echo master new >file2 &&
echo master updated spaced >"spaced name" &&
echo master both added >both &&
echo master updated file12 >file12 &&
echo master updated file14 >file14 &&
echo master new sub >subdir/file3 &&
(
cd submod &&
echo master submodule >bar &&
git add bar &&
git commit -m "Add bar on master" &&
git checkout -b submod-master
) &&
git add file1 "spaced name" file12 file14 file2 subdir/file3 submod &&
git add both &&
git rm file11 &&
git commit -m "master updates" &&
git clean -fdx &&
git checkout -b order-file-start master &&
echo start >a &&
echo start >b &&
git add a b &&
git commit -m start &&
git checkout -b order-file-side1 order-file-start &&
echo side1 >a &&
echo side1 >b &&
git add a b &&
git commit -m side1 &&
git checkout -b order-file-side2 order-file-start &&
echo side2 >a &&
echo side2 >b &&
git add a b &&
git commit -m side2 &&
git config merge.tool mytool &&
git config mergetool.mytool.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" &&
git config mergetool.mytool.trustExitCode true &&
git config mergetool.mybase.cmd "cat \"\$BASE\" >\"\$MERGED\"" &&
git config mergetool.mybase.trustExitCode true
'
test_expect_success 'custom mergetool' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
yes "" | git mergetool both &&
yes "" | git mergetool file1 file1 &&
yes "" | git mergetool file2 "spaced name" &&
yes "" | git mergetool subdir/file3 &&
yes "d" | git mergetool file11 &&
yes "d" | git mergetool file12 &&
yes "l" | git mergetool submod &&
echo "master updated" >expect &&
test_cmp expect file1 &&
echo "master new" >expect &&
test_cmp expect file2 &&
echo "master new sub" >expect &&
test_cmp expect subdir/file3 &&
echo "branch1 submodule" >expect &&
test_cmp expect submod/bar &&
git commit -m "branch1 resolved with mergetool"
'
test_expect_success 'gui mergetool' '
test_config merge.guitool myguitool &&
test_config mergetool.myguitool.cmd "(printf \"gui \" && cat \"\$REMOTE\") >\"\$MERGED\"" &&
test_config mergetool.myguitool.trustExitCode true &&
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
yes "" | git mergetool --gui both &&
yes "" | git mergetool -g file1 file1 &&
yes "" | git mergetool --gui file2 "spaced name" &&
yes "" | git mergetool --gui subdir/file3 &&
yes "d" | git mergetool --gui file11 &&
yes "d" | git mergetool --gui file12 &&
yes "l" | git mergetool --gui submod &&
echo "gui master updated" >expect &&
test_cmp expect file1 &&
echo "gui master new" >expect &&
test_cmp expect file2 &&
echo "gui master new sub" >expect &&
test_cmp expect subdir/file3 &&
echo "branch1 submodule" >expect &&
test_cmp expect submod/bar &&
git commit -m "branch1 resolved with mergetool"
'
test_expect_success 'gui mergetool without merge.guitool set falls back to merge.tool' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
yes "" | git mergetool --gui both &&
yes "" | git mergetool -g file1 file1 &&
yes "" | git mergetool --gui file2 "spaced name" &&
yes "" | git mergetool --gui subdir/file3 &&
yes "d" | git mergetool --gui file11 &&
yes "d" | git mergetool --gui file12 &&
yes "l" | git mergetool --gui submod &&
echo "master updated" >expect &&
test_cmp expect file1 &&
echo "master new" >expect &&
test_cmp expect file2 &&
echo "master new sub" >expect &&
test_cmp expect subdir/file3 &&
echo "branch1 submodule" >expect &&
test_cmp expect submod/bar &&
git commit -m "branch1 resolved with mergetool"
'
test_expect_success 'mergetool crlf' '
test_when_finished "git reset --hard" &&
# This test_config line must go after the above reset line so that
# core.autocrlf is unconfigured before reset runs. (The
# test_config command uses test_when_finished internally and
# test_when_finished is LIFO.)
test_config core.autocrlf true &&
git checkout -b test$test_count branch1 &&
test_must_fail git merge master &&
yes "" | git mergetool file1 &&
yes "" | git mergetool file2 &&
yes "" | git mergetool "spaced name" &&
yes "" | git mergetool both &&
yes "" | git mergetool subdir/file3 &&
yes "d" | git mergetool file11 &&
yes "d" | git mergetool file12 &&
yes "r" | git mergetool submod &&
test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" &&
test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" &&
test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
git commit -m "branch1 resolved with mergetool - autocrlf"
'
test_expect_success 'mergetool in subdir' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
(
cd subdir &&
test_must_fail git merge master &&
yes "" | git mergetool file3 &&
echo "master new sub" >expect &&
test_cmp expect file3
)
'
test_expect_success 'mergetool on file in parent dir' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
(
cd subdir &&
test_must_fail git merge master &&
yes "" | git mergetool file3 &&
yes "" | git mergetool ../file1 &&
yes "" | git mergetool ../file2 ../spaced\ name &&
yes "" | git mergetool ../both &&
yes "d" | git mergetool ../file11 &&
yes "d" | git mergetool ../file12 &&
yes "l" | git mergetool ../submod &&
echo "master updated" >expect &&
test_cmp expect ../file1 &&
echo "master new" >expect &&
test_cmp expect ../file2 &&
echo "branch1 submodule" >expect &&
test_cmp expect ../submod/bar &&
git commit -m "branch1 resolved with mergetool - subdir"
)
'
test_expect_success 'mergetool skips autoresolved' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "d" | git mergetool file11 &&
yes "d" | git mergetool file12 &&
yes "l" | git mergetool submod &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging"
'
test_expect_success 'mergetool merges all from subdir (rerere disabled)' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config rerere.enabled false &&
(
cd subdir &&
test_must_fail git merge master &&
yes "r" | git mergetool ../submod &&
yes "d" "d" | git mergetool --no-prompt &&
echo "master updated" >expect &&
test_cmp expect ../file1 &&
echo "master new" >expect &&
test_cmp expect ../file2 &&
echo "master new sub" >expect &&
test_cmp expect file3 &&
( cd .. && git submodule update -N ) &&
echo "master submodule" >expect &&
test_cmp expect ../submod/bar &&
git commit -m "branch2 resolved by mergetool from subdir"
)
'
test_expect_success 'mergetool merges all from subdir (rerere enabled)' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config rerere.enabled true &&
rm -rf .git/rr-cache &&
(
cd subdir &&
test_must_fail git merge master &&
yes "r" | git mergetool ../submod &&
yes "d" "d" | git mergetool --no-prompt &&
echo "master updated" >expect &&
test_cmp expect ../file1 &&
echo "master new" >expect &&
test_cmp expect ../file2 &&
echo "master new sub" >expect &&
test_cmp expect file3 &&
( cd .. && git submodule update -N ) &&
echo "master submodule" >expect &&
test_cmp expect ../submod/bar &&
git commit -m "branch2 resolved by mergetool from subdir"
)
'
test_expect_success 'mergetool skips resolved paths when rerere is active' '
test_when_finished "git reset --hard" &&
test_config rerere.enabled true &&
rm -rf .git/rr-cache &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
yes "l" | git mergetool --no-prompt submod &&
yes "d" "d" | git mergetool --no-prompt &&
git submodule update -N &&
output="$(yes "n" | git mergetool --no-prompt)" &&
test "$output" = "No files need merging"
'
test_expect_success 'conflicted stash sets up rerere' '
test_when_finished "git reset --hard" &&
test_config rerere.enabled true &&
git checkout stash1 &&
echo "Conflicting stash content" >file11 &&
git stash &&
git checkout --detach stash2 &&
test_must_fail git stash apply &&
test -n "$(git ls-files -u)" &&
conflicts="$(git rerere remaining)" &&
test "$conflicts" = "file11" &&
output="$(git mergetool --no-prompt)" &&
test "$output" != "No files need merging" &&
git commit -am "save the stash resolution" &&
git reset --hard stash2 &&
test_must_fail git stash apply &&
test -n "$(git ls-files -u)" &&
conflicts="$(git rerere remaining)" &&
test -z "$conflicts" &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging"
'
test_expect_success 'mergetool takes partial path' '
test_when_finished "git reset --hard" &&
test_config rerere.enabled false &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
test_must_fail git merge master &&
yes "" | git mergetool subdir &&
echo "master new sub" >expect &&
test_cmp expect subdir/file3
'
test_expect_success 'mergetool delete/delete conflict' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count move-to-c &&
test_must_fail git merge move-to-b &&
echo d | git mergetool a/a/file.txt &&
! test -f a/a/file.txt &&
git reset --hard &&
test_must_fail git merge move-to-b &&
echo m | git mergetool a/a/file.txt &&
test -f b/b/file.txt &&
git reset --hard &&
test_must_fail git merge move-to-b &&
! echo a | git mergetool a/a/file.txt &&
! test -f a/a/file.txt
'
test_expect_success 'mergetool produces no errors when keepBackup is used' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count move-to-c &&
test_config mergetool.keepBackup true &&
test_must_fail git merge move-to-b &&
echo d | git mergetool a/a/file.txt 2>actual &&
test_must_be_empty actual &&
! test -d a
'
test_expect_success 'mergetool honors tempfile config for deleted files' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count move-to-c &&
test_config mergetool.keepTemporaries false &&
test_must_fail git merge move-to-b &&
echo d | git mergetool a/a/file.txt &&
! test -d a
'
test_expect_success 'mergetool keeps tempfiles when aborting delete/delete' '
test_when_finished "git reset --hard" &&
test_when_finished "git clean -fdx" &&
git checkout -b test$test_count move-to-c &&
test_config mergetool.keepTemporaries true &&
test_must_fail git merge move-to-b &&
! test_write_lines a n | git mergetool a/a/file.txt &&
test -d a/a &&
cat >expect <<-\EOF &&
file_BASE_.txt
file_LOCAL_.txt
file_REMOTE_.txt
EOF
ls -1 a/a | sed -e "s/[0-9]*//g" >actual &&
test_cmp expect actual
'
test_expect_success 'deleted vs modified submodule' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
mv submod submod-movedaside &&
git rm --cached submod &&
git commit -m "Submodule deleted from branch" &&
git checkout -b test$test_count.a test$test_count &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "r" | git mergetool submod &&
rmdir submod && mv submod-movedaside submod &&
echo "branch1 submodule" >expect &&
test_cmp expect submod/bar &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping module" &&
mv submod submod-movedaside &&
git checkout -b test$test_count.b test$test_count &&
git submodule update -N &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "l" | git mergetool submod &&
test ! -e submod &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by deleting module" &&
mv submod-movedaside submod &&
git checkout -b test$test_count.c master &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "r" | git mergetool submod &&
test ! -e submod &&
test -d submod.orig &&
git submodule update -N &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by deleting module" &&
mv submod.orig submod &&
git checkout -b test$test_count.d master &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "l" | git mergetool submod &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping module"
'
test_expect_success 'file vs modified submodule' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
mv submod submod-movedaside &&
git rm --cached submod &&
echo not a submodule >submod &&
git add submod &&
git commit -m "Submodule path becomes file" &&
git checkout -b test$test_count.a branch1 &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "r" | git mergetool submod &&
rmdir submod && mv submod-movedaside submod &&
echo "branch1 submodule" >expect &&
test_cmp expect submod/bar &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping module" &&
mv submod submod-movedaside &&
git checkout -b test$test_count.b test$test_count &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
if test "$GIT_TEST_MERGE_ALGORITHM" = ort
then
yes "c" | git mergetool submod~HEAD &&
git rm submod &&
git mv submod~HEAD submod
else
yes "l" | git mergetool submod
fi &&
git submodule update -N &&
echo "not a submodule" >expect &&
test_cmp expect submod &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping file" &&
git checkout -b test$test_count.c master &&
rmdir submod && mv submod-movedaside submod &&
test ! -e submod.orig &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
if test "$GIT_TEST_MERGE_ALGORITHM" = ort
then
mv submod submod.orig &&
git rm --cached submod &&
yes "c" | git mergetool submod~test19 &&
git mv submod~test19 submod
else
yes "r" | git mergetool submod
fi &&
test -d submod.orig &&
git submodule update -N &&
echo "not a submodule" >expect &&
test_cmp expect submod &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping file" &&
git checkout -b test$test_count.d master &&
rmdir submod && mv submod.orig submod &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
yes "" | git mergetool file1 file2 spaced\ name subdir/file3 &&
yes "" | git mergetool both &&
yes "d" | git mergetool file11 file12 &&
yes "l" | git mergetool submod &&
if test "$GIT_TEST_MERGE_ALGORITHM" = ort
then
yes "d" | git mergetool submod~test19
fi &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
output="$(git mergetool --no-prompt)" &&
test "$output" = "No files need merging" &&
git commit -m "Merge resolved by keeping module"
'
test_expect_success 'submodule in subdirectory' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
git submodule update -N &&
(
cd subdir &&
test_create_repo subdir_module &&
(
cd subdir_module &&
: >file15 &&
git add file15 &&
git commit -m "add initial versions"
)
) &&
test_when_finished "rm -rf subdir/subdir_module" &&
git submodule add git://example.com/subsubmodule subdir/subdir_module &&
git add subdir/subdir_module &&
git commit -m "add submodule in subdirectory" &&
git checkout -b test$test_count.a test$test_count &&
git submodule update -N &&
(
cd subdir/subdir_module &&
git checkout -b super10.a &&
echo test$test_count.a >file15 &&
git add file15 &&
git commit -m "on branch 10.a"
) &&
git add subdir/subdir_module &&
git commit -m "change submodule in subdirectory on test$test_count.a" &&
git checkout -b test$test_count.b test$test_count &&
git submodule update -N &&
(
cd subdir/subdir_module &&
git checkout -b super10.b &&
echo test$test_count.b >file15 &&
git add file15 &&
git commit -m "on branch 10.b"
) &&
git add subdir/subdir_module &&
git commit -m "change submodule in subdirectory on test$test_count.b" &&
test_must_fail git merge test$test_count.a &&
(
cd subdir &&
yes "l" | git mergetool subdir_module
) &&
echo "test$test_count.b" >expect &&
test_cmp expect subdir/subdir_module/file15 &&
git submodule update -N &&
echo "test$test_count.b" >expect &&
test_cmp expect subdir/subdir_module/file15 &&
git reset --hard &&
git submodule update -N &&
test_must_fail git merge test$test_count.a &&
yes "r" | git mergetool subdir/subdir_module &&
echo "test$test_count.b" >expect &&
test_cmp expect subdir/subdir_module/file15 &&
git submodule update -N &&
echo "test$test_count.a" >expect &&
test_cmp expect subdir/subdir_module/file15 &&
git commit -m "branch1 resolved with mergetool"
'
test_expect_success 'directory vs modified submodule' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
mv submod submod-movedaside &&
git rm --cached submod &&
mkdir submod &&
echo not a submodule >submod/file16 &&
git add submod/file16 &&
git commit -m "Submodule path becomes directory" &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
yes "l" | git mergetool submod &&
echo "not a submodule" >expect &&
test_cmp expect submod/file16 &&
rm -rf submod.orig &&
git reset --hard &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
test ! -e submod.orig &&
if test "$GIT_TEST_MERGE_ALGORITHM" = ort
then
yes "r" | git mergetool submod~master &&
git mv submod submod.orig &&
git mv submod~master submod
else
yes "r" | git mergetool submod
fi &&
test -d submod.orig &&
echo "not a submodule" >expect &&
test_cmp expect submod.orig/file16 &&
rm -r submod.orig &&
mv submod-movedaside/.git submod &&
( cd submod && git clean -f && git reset --hard ) &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
git reset --hard &&
rm -rf submod-movedaside &&
git checkout -b test$test_count.c master &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
yes "l" | git mergetool submod &&
git submodule update -N &&
echo "master submodule" >expect &&
test_cmp expect submod/bar &&
git reset --hard &&
git submodule update -N &&
test_must_fail git merge test$test_count &&
test -n "$(git ls-files -u)" &&
test ! -e submod.orig &&
yes "r" | git mergetool submod &&
echo "not a submodule" >expect &&
test_cmp expect submod/file16 &&
git reset --hard master &&
( cd submod && git clean -f && git reset --hard ) &&
git submodule update -N
'
test_expect_success 'file with no base' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool mybase -- both &&
test_must_be_empty both
'
test_expect_success 'custom commands override built-ins' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.defaults.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" &&
test_config mergetool.defaults.trustExitCode true &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool defaults -- both &&
echo master both added >expected &&
test_cmp expected both
'
test_expect_success 'filenames seen by tools start with ./' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.writeToTemp false &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool myecho -- both >actual &&
grep ^\./both_LOCAL_ actual
'
test_lazy_prereq MKTEMP '
tempdir=$(mktemp -d -t foo.XXXXXX) &&
test -d "$tempdir" &&
rmdir "$tempdir"
'
test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToTemp' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count branch1 &&
test_config mergetool.writeToTemp true &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
test_must_fail git merge master &&
git mergetool --no-prompt --tool myecho -- both >actual &&
! grep ^\./both_LOCAL_ actual &&
grep /both_LOCAL_ actual
'
test_expect_success 'diff.orderFile configuration is honored' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count order-file-side2 &&
test_config diff.orderFile order-file &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
echo b >order-file &&
echo a >>order-file &&
test_must_fail git merge order-file-side1 &&
cat >expect <<-\EOF &&
Merging:
b
a
EOF
# make sure "order-file" that is ambiguous between
# rev and path is understood correctly.
git branch order-file HEAD &&
git mergetool --no-prompt --tool myecho >output &&
git grep --no-index -h -A2 Merging: output >actual &&
test_cmp expect actual
'
test_expect_success 'mergetool -Oorder-file is honored' '
test_when_finished "git reset --hard" &&
git checkout -b test$test_count order-file-side2 &&
test_config diff.orderFile order-file &&
test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" &&
test_config mergetool.myecho.trustExitCode true &&
echo b >order-file &&
echo a >>order-file &&
test_must_fail git merge order-file-side1 &&
cat >expect <<-\EOF &&
Merging:
a
b
EOF
git mergetool -O/dev/null --no-prompt --tool myecho >output &&
git grep --no-index -h -A2 Merging: output >actual &&
test_cmp expect actual &&
git reset --hard &&
git config --unset diff.orderFile &&
test_must_fail git merge order-file-side1 &&
cat >expect <<-\EOF &&
Merging:
b
a
EOF
git mergetool -Oorder-file --no-prompt --tool myecho >output &&
git grep --no-index -h -A2 Merging: output >actual &&
test_cmp expect actual
'
test_expect_success 'mergetool --tool-help shows recognized tools' '
# Check a few known tools are correctly shown
git mergetool --tool-help >mergetools &&
grep vimdiff mergetools &&
grep vimdiff3 mergetools &&
grep gvimdiff2 mergetools &&
grep araxis mergetools &&
grep xxdiff mergetools &&
grep meld mergetools
'
test_done
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...