Revision 2f84d2a1f1653674f6885a42efd2f648f8372491 authored by Marc on 04 January 2020, 15:27:17 UTC, committed by Dmitry Belyavskiy on 19 May 2020, 08:38:00 UTC
Add certificate validity period (v) and public key & signature algorithms (a) to the "Certificate Chain" output. Eg: Certificate chain 0 s:C = US, ST = California, L = Mountain View, O = Google LLC, CN = www.google.com i:C = US, O = Google Trust Services, CN = GTS CA 1O1 a:PKEY: id-ecPublicKey, 256 (bit); sigalg: RSA-SHA256 v:NotBefore: Dec 3 14:49:26 2019 GMT; NotAfter: Feb 25 14:49:26 2020 GMT 1 s:C = US, O = Google Trust Services, CN = GTS CA 1O1 i:OU = GlobalSign Root CA - R2, O = GlobalSign, CN = GlobalSign a:PKEY: rsaEncryption, 2048 (bit); sigalg: RSA-SHA256 v:NotBefore: Jun 15 00:00:42 2017 GMT; NotAfter: Dec 15 00:00:42 2021 GMT Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> (Merged from https://github.com/openssl/openssl/pull/10757)
1 parent e9e7b5d
README.md
Fuzzing OpenSSL
===============
OpenSSL can use either LibFuzzer or AFL to do fuzzing.
LibFuzzer
---------
How to fuzz OpenSSL with [libfuzzer](http://llvm.org/docs/LibFuzzer.html),
starting from a vanilla+OpenSSH server Ubuntu install.
With `clang` from a package manager
-----------------------------------
Install `clang`, which [ships with `libfuzzer`](http://llvm.org/docs/LibFuzzer.html#fuzzer-usage)
since version 6.0:
sudo apt-get install clang
Configure `openssl` for fuzzing. For now, you'll still need to pass in the path
to the `libFuzzer` library file while configuring; this is represented as
`$PATH_TO_LIBFUZZER` below. A typical value would be
`/usr/lib/llvm-7/lib/clang/7.0.1/lib/linux/libclang_rt.fuzzer-x86_64.a`.
CC=clang ./config enable-fuzz-libfuzzer \
--with-fuzzer-lib=$PATH_TO_LIBFUZZER \
-DPEDANTIC enable-asan enable-ubsan no-shared \
-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION \
-fsanitize=fuzzer-no-link \
enable-ec_nistp_64_gcc_128 -fno-sanitize=alignment \
enable-weak-ssl-ciphers enable-rc5 enable-md2 \
enable-ssl3 enable-ssl3-method enable-nextprotoneg \
--debug
Compile:
sudo apt-get install make
make clean
LDCMD=clang++ make -j4
Finally, perform the actual fuzzing:
fuzz/helper.py $FUZZER
where $FUZZER is one of the executables in `fuzz/`.
It will run until you stop it.
If you get a crash, you should find a corresponding input file in
`fuzz/corpora/$FUZZER-crash/`.
With `clang` from source/pre-built binaries
-------------------------------------------
You may also wish to use a pre-built binary from the [LLVM Download
site](http://releases.llvm.org/download.html), or to [build `clang` from
source](https://clang.llvm.org/get_started.html). After adding `clang` to your
path and locating the `libfuzzer` library file, the procedure for configuring
fuzzing is the same, except that you also need to specify
a `--with-fuzzer-include` option, which should be the parent directory of the
prebuilt fuzzer library. This is represented as `$PATH_TO_LIBFUZZER_DIR` below.
CC=clang ./config enable-fuzz-libfuzzer \
--with-fuzzer-include=$PATH_TO_LIBFUZZER_DIR \
--with-fuzzer-lib=$PATH_TO_LIBFUZZER \
-DPEDANTIC enable-asan enable-ubsan no-shared \
-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION \
-fsanitize=fuzzer-no-link \
enable-ec_nistp_64_gcc_128 -fno-sanitize=alignment \
enable-weak-ssl-ciphers enable-rc5 enable-md2 \
enable-ssl3 enable-ssl3-method enable-nextprotoneg \
--debug
AFL
---
This is an alternative to using LibFuzzer.
Configure for fuzzing:
sudo apt-get install afl-clang
CC=afl-clang-fast ./config enable-fuzz-afl no-shared no-module \
-DPEDANTIC enable-tls1_3 enable-weak-ssl-ciphers enable-rc5 \
enable-md2 enable-ssl3 enable-ssl3-method enable-nextprotoneg \
enable-ec_nistp_64_gcc_128 -fno-sanitize=alignment \
--debug
make clean
make
The following options can also be enabled: enable-asan, enable-ubsan, enable-msan
Run one of the fuzzers:
afl-fuzz -i fuzz/corpora/$FUZZER -o fuzz/corpora/$FUZZER/out fuzz/$FUZZER
Where $FUZZER is one of the executables in `fuzz/`.
Reproducing issues
------------------
If a fuzzer generates a reproducible error, you can reproduce the problem using
the fuzz/*-test binaries and the file generated by the fuzzer. They binaries
don't need to be build for fuzzing, there is no need to set CC or the call
config with enable-fuzz-* or -fsanitize-coverage, but some of the other options
above might be needed. For instance the enable-asan or enable-ubsan option might
be useful to show you when the problem happens. For the client and server fuzzer
it might be needed to use -DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION to
reproduce the generated random numbers.
To reproduce the crash you can run:
fuzz/$FUZZER-test $file
Random numbers
--------------
The client and server fuzzer normally generate random numbers as part of the TLS
connection setup. This results in the coverage of the fuzzing corpus changing
depending on the random numbers. This also has an effect for coverage of the
rest of the test suite and you see the coverage change for each commit even when
no code has been modified.
Since we want to maximize the coverage of the fuzzing corpus, the client and
server fuzzer will use predictable numbers instead of the random numbers. This
is controlled by the FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION define.
The coverage depends on the way the numbers are generated. We don't disable any
check of hashes, but the corpus has the correct hash in it for the random
numbers that were generated. For instance the client fuzzer will always generate
the same client hello with the same random number in it, and so the server, as
emulated by the file, can be generated for that client hello.
Coverage changes
----------------
Since the corpus depends on the default behaviour of the client and the server,
changes in what they send by default will have an impact on the coverage. The
corpus will need to be updated in that case.
Updating the corpus
-------------------
The client and server corpus is generated with multiple config options:
- The options as documented above
- Without enable-ec_nistp_64_gcc_128 and without --debug
- With no-asm
- Using 32 bit
- A default config, plus options needed to generate the fuzzer.
The libfuzzer merge option is used to add the additional coverage
from each config to the minimal set.
Minimizing the corpus
---------------------
When you have gathered corpus data from more than one fuzzer run
or for any other reason want to to minimize the data
in some corpus subdirectory `fuzz/corpora/DIR` this can be done as follows:
mkdir fuzz/corpora/NEWDIR
fuzz/$FUZZER -merge=1 fuzz/corpora/NEWDIR fuzz/corpora/DIR
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...