Revision 3154de71258a32040214fda174e67b975b0810ef authored by Dan Streetman on 02 June 2015, 19:22:10 UTC, committed by Herbert Xu on 04 June 2015, 07:04:59 UTC
Reduce the nx-842 pSeries driver minimum buffer size from 128 to 8. Also replace the single use of IO_BUFFER_ALIGN macro with the standard and correct DDE_BUFFER_ALIGN. The hw sometimes rejects buffers that contain padding past the end of the 8-byte aligned section where it sees the "end" marker. With the minimum buffer size set too high, some highly compressed buffers were being padded and the hw was incorrectly rejecting them; this sets the minimum correctly so there will be no incorrect padding. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1 parent b08b6b7
smpboot.c
/*
* Common SMP CPU bringup/teardown functions
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/smp.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/kthread.h>
#include <linux/smpboot.h>
#include "smpboot.h"
#ifdef CONFIG_SMP
#ifdef CONFIG_GENERIC_SMP_IDLE_THREAD
/*
* For the hotplug case we keep the task structs around and reuse
* them.
*/
static DEFINE_PER_CPU(struct task_struct *, idle_threads);
struct task_struct *idle_thread_get(unsigned int cpu)
{
struct task_struct *tsk = per_cpu(idle_threads, cpu);
if (!tsk)
return ERR_PTR(-ENOMEM);
init_idle(tsk, cpu);
return tsk;
}
void __init idle_thread_set_boot_cpu(void)
{
per_cpu(idle_threads, smp_processor_id()) = current;
}
/**
* idle_init - Initialize the idle thread for a cpu
* @cpu: The cpu for which the idle thread should be initialized
*
* Creates the thread if it does not exist.
*/
static inline void idle_init(unsigned int cpu)
{
struct task_struct *tsk = per_cpu(idle_threads, cpu);
if (!tsk) {
tsk = fork_idle(cpu);
if (IS_ERR(tsk))
pr_err("SMP: fork_idle() failed for CPU %u\n", cpu);
else
per_cpu(idle_threads, cpu) = tsk;
}
}
/**
* idle_threads_init - Initialize idle threads for all cpus
*/
void __init idle_threads_init(void)
{
unsigned int cpu, boot_cpu;
boot_cpu = smp_processor_id();
for_each_possible_cpu(cpu) {
if (cpu != boot_cpu)
idle_init(cpu);
}
}
#endif
#endif /* #ifdef CONFIG_SMP */
static LIST_HEAD(hotplug_threads);
static DEFINE_MUTEX(smpboot_threads_lock);
struct smpboot_thread_data {
unsigned int cpu;
unsigned int status;
struct smp_hotplug_thread *ht;
};
enum {
HP_THREAD_NONE = 0,
HP_THREAD_ACTIVE,
HP_THREAD_PARKED,
};
/**
* smpboot_thread_fn - percpu hotplug thread loop function
* @data: thread data pointer
*
* Checks for thread stop and park conditions. Calls the necessary
* setup, cleanup, park and unpark functions for the registered
* thread.
*
* Returns 1 when the thread should exit, 0 otherwise.
*/
static int smpboot_thread_fn(void *data)
{
struct smpboot_thread_data *td = data;
struct smp_hotplug_thread *ht = td->ht;
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
preempt_disable();
if (kthread_should_stop()) {
__set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->cleanup)
ht->cleanup(td->cpu, cpu_online(td->cpu));
kfree(td);
return 0;
}
if (kthread_should_park()) {
__set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->park && td->status == HP_THREAD_ACTIVE) {
BUG_ON(td->cpu != smp_processor_id());
ht->park(td->cpu);
td->status = HP_THREAD_PARKED;
}
kthread_parkme();
/* We might have been woken for stop */
continue;
}
BUG_ON(td->cpu != smp_processor_id());
/* Check for state change setup */
switch (td->status) {
case HP_THREAD_NONE:
__set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->setup)
ht->setup(td->cpu);
td->status = HP_THREAD_ACTIVE;
continue;
case HP_THREAD_PARKED:
__set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->unpark)
ht->unpark(td->cpu);
td->status = HP_THREAD_ACTIVE;
continue;
}
if (!ht->thread_should_run(td->cpu)) {
preempt_enable_no_resched();
schedule();
} else {
__set_current_state(TASK_RUNNING);
preempt_enable();
ht->thread_fn(td->cpu);
}
}
}
static int
__smpboot_create_thread(struct smp_hotplug_thread *ht, unsigned int cpu)
{
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
struct smpboot_thread_data *td;
if (tsk)
return 0;
td = kzalloc_node(sizeof(*td), GFP_KERNEL, cpu_to_node(cpu));
if (!td)
return -ENOMEM;
td->cpu = cpu;
td->ht = ht;
tsk = kthread_create_on_cpu(smpboot_thread_fn, td, cpu,
ht->thread_comm);
if (IS_ERR(tsk)) {
kfree(td);
return PTR_ERR(tsk);
}
get_task_struct(tsk);
*per_cpu_ptr(ht->store, cpu) = tsk;
if (ht->create) {
/*
* Make sure that the task has actually scheduled out
* into park position, before calling the create
* callback. At least the migration thread callback
* requires that the task is off the runqueue.
*/
if (!wait_task_inactive(tsk, TASK_PARKED))
WARN_ON(1);
else
ht->create(cpu);
}
return 0;
}
int smpboot_create_threads(unsigned int cpu)
{
struct smp_hotplug_thread *cur;
int ret = 0;
mutex_lock(&smpboot_threads_lock);
list_for_each_entry(cur, &hotplug_threads, list) {
ret = __smpboot_create_thread(cur, cpu);
if (ret)
break;
}
mutex_unlock(&smpboot_threads_lock);
return ret;
}
static void smpboot_unpark_thread(struct smp_hotplug_thread *ht, unsigned int cpu)
{
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
if (ht->pre_unpark)
ht->pre_unpark(cpu);
kthread_unpark(tsk);
}
void smpboot_unpark_threads(unsigned int cpu)
{
struct smp_hotplug_thread *cur;
mutex_lock(&smpboot_threads_lock);
list_for_each_entry(cur, &hotplug_threads, list)
smpboot_unpark_thread(cur, cpu);
mutex_unlock(&smpboot_threads_lock);
}
static void smpboot_park_thread(struct smp_hotplug_thread *ht, unsigned int cpu)
{
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
if (tsk && !ht->selfparking)
kthread_park(tsk);
}
void smpboot_park_threads(unsigned int cpu)
{
struct smp_hotplug_thread *cur;
mutex_lock(&smpboot_threads_lock);
list_for_each_entry_reverse(cur, &hotplug_threads, list)
smpboot_park_thread(cur, cpu);
mutex_unlock(&smpboot_threads_lock);
}
static void smpboot_destroy_threads(struct smp_hotplug_thread *ht)
{
unsigned int cpu;
/* We need to destroy also the parked threads of offline cpus */
for_each_possible_cpu(cpu) {
struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu);
if (tsk) {
kthread_stop(tsk);
put_task_struct(tsk);
*per_cpu_ptr(ht->store, cpu) = NULL;
}
}
}
/**
* smpboot_register_percpu_thread - Register a per_cpu thread related to hotplug
* @plug_thread: Hotplug thread descriptor
*
* Creates and starts the threads on all online cpus.
*/
int smpboot_register_percpu_thread(struct smp_hotplug_thread *plug_thread)
{
unsigned int cpu;
int ret = 0;
get_online_cpus();
mutex_lock(&smpboot_threads_lock);
for_each_online_cpu(cpu) {
ret = __smpboot_create_thread(plug_thread, cpu);
if (ret) {
smpboot_destroy_threads(plug_thread);
goto out;
}
smpboot_unpark_thread(plug_thread, cpu);
}
list_add(&plug_thread->list, &hotplug_threads);
out:
mutex_unlock(&smpboot_threads_lock);
put_online_cpus();
return ret;
}
EXPORT_SYMBOL_GPL(smpboot_register_percpu_thread);
/**
* smpboot_unregister_percpu_thread - Unregister a per_cpu thread related to hotplug
* @plug_thread: Hotplug thread descriptor
*
* Stops all threads on all possible cpus.
*/
void smpboot_unregister_percpu_thread(struct smp_hotplug_thread *plug_thread)
{
get_online_cpus();
mutex_lock(&smpboot_threads_lock);
list_del(&plug_thread->list);
smpboot_destroy_threads(plug_thread);
mutex_unlock(&smpboot_threads_lock);
put_online_cpus();
}
EXPORT_SYMBOL_GPL(smpboot_unregister_percpu_thread);
static DEFINE_PER_CPU(atomic_t, cpu_hotplug_state) = ATOMIC_INIT(CPU_POST_DEAD);
/*
* Called to poll specified CPU's state, for example, when waiting for
* a CPU to come online.
*/
int cpu_report_state(int cpu)
{
return atomic_read(&per_cpu(cpu_hotplug_state, cpu));
}
/*
* If CPU has died properly, set its state to CPU_UP_PREPARE and
* return success. Otherwise, return -EBUSY if the CPU died after
* cpu_wait_death() timed out. And yet otherwise again, return -EAGAIN
* if cpu_wait_death() timed out and the CPU still hasn't gotten around
* to dying. In the latter two cases, the CPU might not be set up
* properly, but it is up to the arch-specific code to decide.
* Finally, -EIO indicates an unanticipated problem.
*
* Note that it is permissible to omit this call entirely, as is
* done in architectures that do no CPU-hotplug error checking.
*/
int cpu_check_up_prepare(int cpu)
{
if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_UP_PREPARE);
return 0;
}
switch (atomic_read(&per_cpu(cpu_hotplug_state, cpu))) {
case CPU_POST_DEAD:
/* The CPU died properly, so just start it up again. */
atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_UP_PREPARE);
return 0;
case CPU_DEAD_FROZEN:
/*
* Timeout during CPU death, so let caller know.
* The outgoing CPU completed its processing, but after
* cpu_wait_death() timed out and reported the error. The
* caller is free to proceed, in which case the state
* will be reset properly by cpu_set_state_online().
* Proceeding despite this -EBUSY return makes sense
* for systems where the outgoing CPUs take themselves
* offline, with no post-death manipulation required from
* a surviving CPU.
*/
return -EBUSY;
case CPU_BROKEN:
/*
* The most likely reason we got here is that there was
* a timeout during CPU death, and the outgoing CPU never
* did complete its processing. This could happen on
* a virtualized system if the outgoing VCPU gets preempted
* for more than five seconds, and the user attempts to
* immediately online that same CPU. Trying again later
* might return -EBUSY above, hence -EAGAIN.
*/
return -EAGAIN;
default:
/* Should not happen. Famous last words. */
return -EIO;
}
}
/*
* Mark the specified CPU online.
*
* Note that it is permissible to omit this call entirely, as is
* done in architectures that do no CPU-hotplug error checking.
*/
void cpu_set_state_online(int cpu)
{
(void)atomic_xchg(&per_cpu(cpu_hotplug_state, cpu), CPU_ONLINE);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* Wait for the specified CPU to exit the idle loop and die.
*/
bool cpu_wait_death(unsigned int cpu, int seconds)
{
int jf_left = seconds * HZ;
int oldstate;
bool ret = true;
int sleep_jf = 1;
might_sleep();
/* The outgoing CPU will normally get done quite quickly. */
if (atomic_read(&per_cpu(cpu_hotplug_state, cpu)) == CPU_DEAD)
goto update_state;
udelay(5);
/* But if the outgoing CPU dawdles, wait increasingly long times. */
while (atomic_read(&per_cpu(cpu_hotplug_state, cpu)) != CPU_DEAD) {
schedule_timeout_uninterruptible(sleep_jf);
jf_left -= sleep_jf;
if (jf_left <= 0)
break;
sleep_jf = DIV_ROUND_UP(sleep_jf * 11, 10);
}
update_state:
oldstate = atomic_read(&per_cpu(cpu_hotplug_state, cpu));
if (oldstate == CPU_DEAD) {
/* Outgoing CPU died normally, update state. */
smp_mb(); /* atomic_read() before update. */
atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_POST_DEAD);
} else {
/* Outgoing CPU still hasn't died, set state accordingly. */
if (atomic_cmpxchg(&per_cpu(cpu_hotplug_state, cpu),
oldstate, CPU_BROKEN) != oldstate)
goto update_state;
ret = false;
}
return ret;
}
/*
* Called by the outgoing CPU to report its successful death. Return
* false if this report follows the surviving CPU's timing out.
*
* A separate "CPU_DEAD_FROZEN" is used when the surviving CPU
* timed out. This approach allows architectures to omit calls to
* cpu_check_up_prepare() and cpu_set_state_online() without defeating
* the next cpu_wait_death()'s polling loop.
*/
bool cpu_report_death(void)
{
int oldstate;
int newstate;
int cpu = smp_processor_id();
do {
oldstate = atomic_read(&per_cpu(cpu_hotplug_state, cpu));
if (oldstate != CPU_BROKEN)
newstate = CPU_DEAD;
else
newstate = CPU_DEAD_FROZEN;
} while (atomic_cmpxchg(&per_cpu(cpu_hotplug_state, cpu),
oldstate, newstate) != oldstate);
return newstate == CPU_DEAD;
}
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...