https://github.com/torvalds/linux
Revision 31739eae738ccbe8b9d627c3f2251017ca03f4d2 authored by Doug Berger on 21 March 2017, 21:01:06 UTC, committed by David S. Miller on 22 March 2017, 19:47:26 UTC
Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent d515684
Tip revision: 31739eae738ccbe8b9d627c3f2251017ca03f4d2 authored by Doug Berger on 21 March 2017, 21:01:06 UTC
net: bcmgenet: remove bcmgenet_internal_phy_setup()
net: bcmgenet: remove bcmgenet_internal_phy_setup()
Tip revision: 31739ea
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.3 KB |
.mailmap | -rw-r--r-- | 7.7 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 96.0 KB |
Kbuild | -rw-r--r-- | 2.8 KB |
Kconfig | -rw-r--r-- | 252 bytes |
MAINTAINERS | -rw-r--r-- | 389.1 KB |
Makefile | -rw-r--r-- | 57.7 KB |
README | -rw-r--r-- | 722 bytes |
Computing file changes ...