Revision 328716bc16b7077ea5f6293c7420247c570d6480 authored by Jean Delvare on 14 August 2010, 19:08:58 UTC, committed by Jean Delvare on 14 August 2010, 19:08:58 UTC
Add initial support for PWM outputs of the PC87427 Super-I/O chip. Only mode change and manual fan speed control are supported. Automatic mode configuration isn't supported, and won't be until at least one board is known, which makes uses of the PWM outputs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
1 parent 0d22d58
atxp1.c
/*
atxp1.c - kernel module for setting CPU VID and general purpose
I/Os using the Attansic ATXP1 chip.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
MODULE_VERSION("0.6.3");
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VID 0x00
#define ATXP1_CVID 0x01
#define ATXP1_GPIO1 0x06
#define ATXP1_GPIO2 0x0a
#define ATXP1_VIDENA 0x20
#define ATXP1_VIDMASK 0x1f
#define ATXP1_GPIO1MASK 0x0f
static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
static int atxp1_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int atxp1_remove(struct i2c_client *client);
static struct atxp1_data * atxp1_update_device(struct device *dev);
static int atxp1_detect(struct i2c_client *client, struct i2c_board_info *info);
static const struct i2c_device_id atxp1_id[] = {
{ "atxp1", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, atxp1_id);
static struct i2c_driver atxp1_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "atxp1",
},
.probe = atxp1_probe,
.remove = atxp1_remove,
.id_table = atxp1_id,
.detect = atxp1_detect,
.address_list = normal_i2c,
};
struct atxp1_data {
struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated;
u8 valid;
struct {
u8 vid; /* VID output register */
u8 cpu_vid; /* VID input from CPU */
u8 gpio1; /* General purpose I/O register 1 */
u8 gpio2; /* General purpose I/O register 2 */
} reg;
u8 vrm; /* Detected CPU VRM */
};
static struct atxp1_data * atxp1_update_device(struct device *dev)
{
struct i2c_client *client;
struct atxp1_data *data;
client = to_i2c_client(dev);
data = i2c_get_clientdata(client);
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
/* Update local register data */
data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID);
data->reg.cpu_vid = i2c_smbus_read_byte_data(client, ATXP1_CVID);
data->reg.gpio1 = i2c_smbus_read_byte_data(client, ATXP1_GPIO1);
data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2);
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return(data);
}
/* sys file functions for cpu0_vid */
static ssize_t atxp1_showvcore(struct device *dev, struct device_attribute *attr, char *buf)
{
int size;
struct atxp1_data *data;
data = atxp1_update_device(dev);
size = sprintf(buf, "%d\n", vid_from_reg(data->reg.vid & ATXP1_VIDMASK, data->vrm));
return size;
}
static ssize_t atxp1_storevcore(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct atxp1_data *data;
struct i2c_client *client;
int vid, cvid;
unsigned int vcore;
client = to_i2c_client(dev);
data = atxp1_update_device(dev);
vcore = simple_strtoul(buf, NULL, 10);
vcore /= 25;
vcore *= 25;
/* Calculate VID */
vid = vid_to_reg(vcore, data->vrm);
if (vid < 0) {
dev_err(dev, "VID calculation failed.\n");
return -1;
}
/* If output enabled, use control register value. Otherwise original CPU VID */
if (data->reg.vid & ATXP1_VIDENA)
cvid = data->reg.vid & ATXP1_VIDMASK;
else
cvid = data->reg.cpu_vid;
/* Nothing changed, aborting */
if (vid == cvid)
return count;
dev_dbg(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid);
/* Write every 25 mV step to increase stability */
if (cvid > vid) {
for (; cvid >= vid; cvid--) {
i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA);
}
}
else {
for (; cvid <= vid; cvid++) {
i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA);
}
}
data->valid = 0;
return count;
}
/* CPU core reference voltage
unit: millivolt
*/
static DEVICE_ATTR(cpu0_vid, S_IRUGO | S_IWUSR, atxp1_showvcore, atxp1_storevcore);
/* sys file functions for GPIO1 */
static ssize_t atxp1_showgpio1(struct device *dev, struct device_attribute *attr, char *buf)
{
int size;
struct atxp1_data *data;
data = atxp1_update_device(dev);
size = sprintf(buf, "0x%02x\n", data->reg.gpio1 & ATXP1_GPIO1MASK);
return size;
}
static ssize_t atxp1_storegpio1(struct device *dev, struct device_attribute *attr, const char*buf, size_t count)
{
struct atxp1_data *data;
struct i2c_client *client;
unsigned int value;
client = to_i2c_client(dev);
data = atxp1_update_device(dev);
value = simple_strtoul(buf, NULL, 16);
value &= ATXP1_GPIO1MASK;
if (value != (data->reg.gpio1 & ATXP1_GPIO1MASK)) {
dev_info(dev, "Writing 0x%x to GPIO1.\n", value);
i2c_smbus_write_byte_data(client, ATXP1_GPIO1, value);
data->valid = 0;
}
return count;
}
/* GPIO1 data register
unit: Four bit as hex (e.g. 0x0f)
*/
static DEVICE_ATTR(gpio1, S_IRUGO | S_IWUSR, atxp1_showgpio1, atxp1_storegpio1);
/* sys file functions for GPIO2 */
static ssize_t atxp1_showgpio2(struct device *dev, struct device_attribute *attr, char *buf)
{
int size;
struct atxp1_data *data;
data = atxp1_update_device(dev);
size = sprintf(buf, "0x%02x\n", data->reg.gpio2);
return size;
}
static ssize_t atxp1_storegpio2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct atxp1_data *data;
struct i2c_client *client;
unsigned int value;
client = to_i2c_client(dev);
data = atxp1_update_device(dev);
value = simple_strtoul(buf, NULL, 16) & 0xff;
if (value != data->reg.gpio2) {
dev_info(dev, "Writing 0x%x to GPIO1.\n", value);
i2c_smbus_write_byte_data(client, ATXP1_GPIO2, value);
data->valid = 0;
}
return count;
}
/* GPIO2 data register
unit: Eight bit as hex (e.g. 0xff)
*/
static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2);
static struct attribute *atxp1_attributes[] = {
&dev_attr_gpio1.attr,
&dev_attr_gpio2.attr,
&dev_attr_cpu0_vid.attr,
NULL
};
static const struct attribute_group atxp1_group = {
.attrs = atxp1_attributes,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
static int atxp1_detect(struct i2c_client *new_client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
u8 temp;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect ATXP1, checking if vendor ID registers are all zero */
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
return -ENODEV;
/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
* showing the same as register 0x00 */
temp = i2c_smbus_read_byte_data(new_client, 0x00);
if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
(i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
return -ENODEV;
/* Get VRM */
temp = vid_which_vrm();
if ((temp != 90) && (temp != 91)) {
dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
temp / 10, temp % 10);
return -ENODEV;
}
strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
return 0;
}
static int atxp1_probe(struct i2c_client *new_client,
const struct i2c_device_id *id)
{
struct atxp1_data *data;
int err;
data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
/* Get VRM */
data->vrm = vid_which_vrm();
i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group)))
goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
dev_info(&new_client->dev, "Using VRM: %d.%d\n",
data->vrm / 10, data->vrm % 10);
return 0;
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &atxp1_group);
exit_free:
kfree(data);
exit:
return err;
};
static int atxp1_remove(struct i2c_client *client)
{
struct atxp1_data * data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &atxp1_group);
kfree(data);
return 0;
};
static int __init atxp1_init(void)
{
return i2c_add_driver(&atxp1_driver);
};
static void __exit atxp1_exit(void)
{
i2c_del_driver(&atxp1_driver);
};
module_init(atxp1_init);
module_exit(atxp1_exit);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...