Revision 328d6253c5f255d88b969913daebef984062dfa5 authored by alex@thinkpad on 02 February 2018, 13:44:08 UTC, committed by alex@thinkpad on 02 February 2018, 13:44:08 UTC
(to make sure all events are printed in all modes)
1 parent 03c58c5
powersave.c
#include "dryos.h"
#include "property.h"
#include "config.h"
#include "zebra.h"
#include "shoot.h"
#include "bmp.h"
#include "lens.h"
/* Canon's powersave timer */
/* ======================= */
void powersave_prolong()
{
/* reset the powersave timer (as if you would press a button) */
int prolong = 3; /* AUTO_POWEROFF_PROLONG */
prop_request_change(PROP_ICU_AUTO_POWEROFF, &prolong, 4);
}
void powersave_prohibit()
{
/* disable powersave timer */
int powersave_prohibit = 2; /* AUTO_POWEROFF_PROHIBIT */
prop_request_change(PROP_ICU_AUTO_POWEROFF, &powersave_prohibit, 4);
}
void powersave_permit()
{
/* re-enable powersave timer */
int powersave_permit = 1; /* AUTO_POWEROFF_PERMIT */
prop_request_change(PROP_ICU_AUTO_POWEROFF, &powersave_permit, 4);
}
/* Paused LiveView */
/* =============== */
static int lv_zoom_before_pause = 0;
void PauseLiveView() // this should not include "display off" command
{
if (ml_shutdown_requested) return;
if (sensor_cleaning) return;
if (PLAY_MODE) return;
if (MENU_MODE) return;
if (LV_NON_PAUSED)
{
//~ ASSERT(DISPLAY_IS_ON);
int x = 1;
BMP_LOCK(
lv_zoom_before_pause = lv_dispsize;
prop_request_change_wait(PROP_LV_ACTION, &x, 4, 1000);
msleep(100);
clrscr();
lv_paused = 1;
)
ASSERT(LV_PAUSED);
}
}
// returns 1 if it did wakeup
int ResumeLiveView()
{
info_led_on();
int ans = 0;
if (ml_shutdown_requested) return 0;
if (sensor_cleaning) return 0;
if (PLAY_MODE) return 0;
if (MENU_MODE) return 0;
if (LV_PAUSED)
{
int x = 0;
BMP_LOCK(
prop_request_change_wait(PROP_LV_ACTION, &x, 4, 1000);
int iter = 10; while (!DISPLAY_IS_ON && iter--) msleep(100);
)
while (sensor_cleaning) msleep(100);
if (lv) set_lv_zoom(lv_zoom_before_pause);
msleep(100);
ans = 1;
}
lv_paused = 0;
idle_wakeup_reset_counters(-1357);
info_led_off();
return ans;
}
/* Display on/off */
/* ============== */
/* handled in debug.c, handle_tricky_canon_calls */
/* todo: move them here */
void display_on()
{
fake_simple_button(MLEV_TURN_ON_DISPLAY);
}
void display_off()
{
fake_simple_button(MLEV_TURN_OFF_DISPLAY);
}
/* LED blinking when idle */
/* ====================== */
/* useful if you forget your camera on, with the display turned off */
static CONFIG_INT("idle.blink", idle_blink, 1);
/* called every 100ms from zebra.c */
void idle_led_blink_step(int k)
{
// Here we're blinking the info LED approximately once every five
// seconds to show the user that their camera is still on and has
// not dropped into standby mode. But it's distracting to blink
// it every five seconds, and if the user pushed a button recently
// then they already _know_ that their camera is still on, so
// let's only do it if the camera's buttons have been idle for at
// least 30 seconds.
if (k % 50 == 0 && !DISPLAY_IS_ON && lens_info.job_state == 0 && NOT_RECORDING && !get_halfshutter_pressed() && !is_intervalometer_running() && idle_blink)
if ((get_seconds_clock() - get_last_time_active()) > 30)
info_led_blink(1, 10, 10);
}
/* ML implementation: Powersave in LiveView */
/* ======================================== */
CONFIG_INT("idle.display.turn_off.after", idle_display_turn_off_after, 0); // this also enables power saving for intervalometer
static CONFIG_INT("idle.display.dim.after", idle_display_dim_after, 0);
static CONFIG_INT("idle.display.gdraw_off.after", idle_display_global_draw_off_after, 0);
static CONFIG_INT("idle.rec", idle_rec, 0);
static CONFIG_INT("idle.shortcut.key", idle_shortcut_key, 0);
/* also used in zebra.c */
volatile int idle_globaldraw_disable = 0;
#ifdef FEATURE_POWERSAVE_LIVEVIEW
static int idle_countdown_display_dim = 50;
static int idle_countdown_display_off = 50;
static int idle_countdown_globaldraw = 50;
static int idle_countdown_clrscr = 50;
static int idle_countdown_display_dim_prev = 50;
static int idle_countdown_display_off_prev = 50;
static int idle_countdown_globaldraw_prev = 50;
static int idle_countdown_clrscr_prev = 50;
/* this will block all Canon drawing routines when the camera is idle */
/* (workaround for 50D) */
#ifdef CONFIG_KILL_FLICKER
static int idle_countdown_killflicker = 5;
static int idle_countdown_killflicker_prev = 5;
extern int kill_canon_gui_mode;
#endif
int idle_is_powersave_enabled()
{
return idle_display_dim_after || idle_display_turn_off_after || idle_display_global_draw_off_after;
}
int idle_is_powersave_enabled_on_info_disp_key()
{
return idle_is_powersave_enabled() && idle_shortcut_key;
}
int idle_is_powersave_active()
{
return (idle_display_dim_after && !idle_countdown_display_dim_prev) ||
(idle_display_turn_off_after && !idle_countdown_display_off_prev) ||
(idle_display_global_draw_off_after && !idle_countdown_globaldraw_prev);
}
void idle_force_powersave_in_1s()
{
idle_countdown_display_off = MIN(idle_countdown_display_off, 10);
idle_countdown_display_dim = MIN(idle_countdown_display_dim, 10);
idle_countdown_globaldraw = MIN(idle_countdown_globaldraw, 10);
}
void idle_force_powersave_now()
{
idle_countdown_display_off = MIN(idle_countdown_display_off, 1);
idle_countdown_display_dim = MIN(idle_countdown_display_dim, 1);
idle_countdown_globaldraw = MIN(idle_countdown_globaldraw, 1);
}
int handle_powersave_key(struct event * event)
{
if (event->param == BGMT_INFO)
{
if (!idle_shortcut_key) return 1;
if (!lv) return 1;
if (!idle_is_powersave_enabled()) return 1;
if (IS_FAKE(event)) return 1;
if (gui_menu_shown()) return 1;
if (!idle_is_powersave_active())
{
idle_force_powersave_now();
info_led_blink(1,50,0);
}
return 0;
}
return 1;
}
#ifdef CONFIG_LCD_SENSOR
CONFIG_INT("lcdsensor.wakeup", lcd_sensor_wakeup, 1);
#endif
void idle_wakeup_reset_counters(int reason) // called from handle_buttons
{
if (ml_shutdown_requested) return;
#if 0
NotifyBox(2000, "wakeup: %d ", reason);
#endif
//~ bmp_printf(FONT_LARGE, 50, 50, "wakeup: %d ", reason);
// when sensor is covered, timeout changes to 3 seconds
#ifdef CONFIG_LCD_SENSOR
int sensor_status = lcd_sensor_wakeup && display_sensor && DISPLAY_SENSOR_POWERED;
#else
int sensor_status = 0;
#endif
// those are for powersaving
idle_countdown_display_off = sensor_status ? 25 : idle_display_turn_off_after * 10;
idle_countdown_display_dim = sensor_status ? 25 : idle_display_dim_after * 10;
idle_countdown_globaldraw = sensor_status ? 25 : idle_display_global_draw_off_after * 10;
if (reason == -2345) // disable powersave during recording
return;
// those are not for powersaving
idle_countdown_clrscr = 30;
if (reason == -10 || reason == -11) // focus event (todo: should define constants for those)
return;
#ifdef CONFIG_KILL_FLICKER
idle_countdown_killflicker = 10;
#endif
}
// called at 10 Hz
static void update_idle_countdown(int* countdown)
{
//~ bmp_printf(FONT_MED, 200, 200, "%d ", *countdown);
if ((liveview_display_idle() && !get_halfshutter_pressed() && !gui_menu_shown()) || !DISPLAY_IS_ON)
{
if (*countdown)
(*countdown)--;
}
else
{
idle_wakeup_reset_counters(-100); // will reset all idle countdowns
}
#ifdef CONFIG_LCD_SENSOR
int sensor_status = lcd_sensor_wakeup && display_sensor && DISPLAY_SENSOR_POWERED;
#else
int sensor_status = 0;
#endif
static int prev_sensor_status = 0;
if (sensor_status != prev_sensor_status)
idle_wakeup_reset_counters(-1);
prev_sensor_status = sensor_status;
}
static void idle_action_do(int* countdown, int* prev_countdown, void(*action_on)(void), void(*action_off)(void))
{
if (ml_shutdown_requested) return;
update_idle_countdown(countdown);
int c = *countdown; // *countdown may be changed by "wakeup" => race condition
//~ bmp_printf(FONT_MED, 100, 200, "%d->%d ", *prev_countdown, c);
if (*prev_countdown && !c)
{
//~ info_led_blink(1, 50, 50);
//~ bmp_printf(FONT_MED, 100, 200, "action "); msleep(500);
action_on();
//~ msleep(500);
//~ bmp_printf(FONT_MED, 100, 200, " ");
}
else if (!*prev_countdown && c)
{
//~ info_led_blink(1, 50, 50);
//~ bmp_printf(FONT_MED, 100, 200, "unaction"); msleep(500);
action_off();
//~ msleep(500);
//~ bmp_printf(FONT_MED, 100, 200, " ");
}
*prev_countdown = c;
}
static void idle_display_off_show_warning()
{
extern int motion_detect;
if (motion_detect || RECORDING)
{
NotifyBox(3000, "DISPLAY OFF...");
}
else
{
NotifyBox(3000, "DISPLAY AND SENSOR OFF...");
}
}
static void idle_display_off()
{
extern int motion_detect;
if (!(motion_detect || RECORDING)) PauseLiveView();
display_off();
msleep(300);
idle_countdown_display_off = 0;
ASSERT(!(RECORDING && LV_PAUSED));
ASSERT(!DISPLAY_IS_ON);
}
static void idle_display_on()
{
ResumeLiveView();
display_on();
redraw();
}
static void idle_bmp_off()
{
bmp_off();
}
static void idle_bmp_on()
{
bmp_on();
}
static PROP_INT(PROP_LCD_BRIGHTNESS_MODE, lcd_brightness_mode);
static PROP_INT(PROP_LOGICAL_CONNECT, logical_connect); // EOS utility?
static int old_backlight_level = 0;
static void idle_display_dim()
{
ASSERT(lv || lv_paused);
#ifdef CONFIG_AUTO_BRIGHTNESS
int backlight_mode = lcd_brightness_mode;
if (backlight_mode == 0) // can't restore brightness properly in auto mode
{
NotifyBox(2000, "LCD brightness is automatic.\n"
"ML will not dim the display.");
return;
}
#endif
old_backlight_level = backlight_level;
set_backlight_level(1);
}
static void idle_display_undim()
{
if (old_backlight_level)
{
set_backlight_level(old_backlight_level);
old_backlight_level = 0;
}
}
void idle_globaldraw_dis()
{
idle_globaldraw_disable++;
}
void idle_globaldraw_en()
{
if (idle_globaldraw_disable > 0)
idle_globaldraw_disable--;
}
#ifdef CONFIG_KILL_FLICKER
static void black_bars_50D()
{
if (!get_global_draw()) return;
if (!is_movie_mode()) return;
get_yuv422_vram();
if (video_mode_resolution > 1)
{
bmp_fill(COLOR_BLACK, os.x0, os.y0, os.off_43, os.y_ex);
bmp_fill(COLOR_BLACK, os.x_max - os.off_43, os.y0, os.off_43, os.y_ex);
}
else
{
bmp_fill(COLOR_BLACK, os.x0, os.y0, os.x_ex, os.off_169);
bmp_fill(COLOR_BLACK, os.x0, os.y_max - os.off_169, os.x_ex, os.off_169);
}
}
/* also called from _redraw_do */
void idle_kill_flicker()
{
if (!canon_gui_front_buffer_disabled())
{
get_yuv422_vram();
canon_gui_disable_front_buffer();
clrscr();
if (is_movie_mode())
{
black_bars_50D();
if (RECORDING) {
fill_circle(os.x_max - 12, os.y0 + 28, 10, COLOR_RED);
}
}
}
}
static void idle_stop_killing_flicker()
{
if (canon_gui_front_buffer_disabled())
{
canon_gui_enable_front_buffer(0);
}
}
#endif
/* called from zebra.c */
void idle_powersave_step()
{
if (RECORDING && idle_rec == 0) // don't go to powersave when recording
idle_wakeup_reset_counters(-2345);
if (NOT_RECORDING && idle_rec == 1) // don't go to powersave when not recording
idle_wakeup_reset_counters(-2345);
if (logical_connect)
idle_wakeup_reset_counters(-305); // EOS utility
if (idle_display_dim_after)
{
idle_action_do(&idle_countdown_display_dim, &idle_countdown_display_dim_prev, idle_display_dim, idle_display_undim);
}
if (idle_display_turn_off_after)
{
idle_action_do(&idle_countdown_display_off, &idle_countdown_display_off_prev, idle_display_off, idle_display_on);
// show a warning that display is going to be turned off (and clear it if some button is pressed)
static int warning_dirty = 0;
if (idle_countdown_display_off == 30)
{
idle_display_off_show_warning();
warning_dirty = 1;
}
else if (warning_dirty && idle_countdown_display_off > 30)
{
NotifyBoxHide();
warning_dirty = 0;
}
}
if (idle_display_global_draw_off_after)
idle_action_do(&idle_countdown_globaldraw, &idle_countdown_globaldraw_prev, idle_globaldraw_dis, idle_globaldraw_en);
/* zebra.c */
extern int clearscreen;
if (clearscreen == 2) // clear overlay when idle
idle_action_do(&idle_countdown_clrscr, &idle_countdown_clrscr_prev, idle_bmp_off, idle_bmp_on);
#ifdef CONFIG_KILL_FLICKER
/* see ZEBRAS_IN_LIVEVIEW in zebra.c */
int zebras_in_liveview = get_global_draw_setting() & 1;
if (kill_canon_gui_mode == 1)
{
if (zebras_in_liveview && !gui_menu_shown())
{
int idle = liveview_display_idle() && lv_disp_mode == 0;
if (idle)
{
if (!canon_gui_front_buffer_disabled())
idle_kill_flicker();
}
else
{
if (canon_gui_front_buffer_disabled())
idle_stop_killing_flicker();
}
static int prev_idle = 0;
if (!idle && prev_idle != idle) redraw();
prev_idle = idle;
}
}
else if (kill_canon_gui_mode == 2) // LV transparent menus and key presses
{
if (zebras_in_liveview && !gui_menu_shown() && lv_disp_mode == 0)
idle_action_do(&idle_countdown_killflicker, &idle_countdown_killflicker_prev, idle_kill_flicker, idle_stop_killing_flicker);
}
#endif
}
PROP_HANDLER(PROP_LV_ACTION)
{
idle_display_undim(); // restore LCD brightness, especially for shutdown
}
static char* idle_time_format(int t)
{
static char msg[50];
if (t) snprintf(msg, sizeof(msg), "after %d%s", t < 60 ? t : t/60, t < 60 ? "sec" : "min");
else snprintf(msg, sizeof(msg), "OFF");
return msg;
}
static MENU_UPDATE_FUNC(idle_display_dim_print)
{
MENU_SET_VALUE(
idle_time_format(CURRENT_VALUE)
);
#ifdef CONFIG_AUTO_BRIGHTNESS
int backlight_mode = lcd_brightness_mode;
if (backlight_mode == 0) // can't restore brightness properly in auto mode
{
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "LCD brightness is auto in Canon menu. It won't work.");
}
#endif
}
static MENU_UPDATE_FUNC(idle_display_feature_print)
{
MENU_SET_VALUE(
idle_time_format(CURRENT_VALUE)
);
}
static int timeout_values[] = {0, 5, 10, 20, 30, 60, 120, 300, 600, 900};
static int current_timeout_index(int t)
{
int i;
for (i = 0; i < COUNT(timeout_values); i++)
if (t == timeout_values[i]) return i;
return 0;
}
static void idle_timeout_toggle(void* priv, int sign)
{
int* t = (int*)priv;
int i = current_timeout_index(*t);
i = MOD(i + sign, COUNT(timeout_values));
*(int*)priv = timeout_values[i];
}
static struct menu_entry powersave_menus[] = {
{
.name = "Powersave in LiveView",
.select = menu_open_submenu,
.submenu_width = 715,
.help = "Options for reducing power consumption during idle times.",
.depends_on = DEP_LIVEVIEW,
.children = (struct menu_entry[]) {
{
.name = "Enable power saving",
.priv = &idle_rec,
.max = 2,
.choices = (const char *[]) {"on Standby", "on Recording", "on STBY+REC"},
.help = "If enabled, powersave (see above) works when recording too."
},
#ifdef CONFIG_LCD_SENSOR
{
.name = "Use LCD sensor",
.priv = &lcd_sensor_wakeup,
.max = 1,
.help = "With the LCD sensor you may wakeup or force powersave mode."
},
#endif
{
.name = "Use shortcut key",
.priv = &idle_shortcut_key,
.max = 1,
.choices = (const char *[]) {"OFF", INFO_BTN_NAME},
.help = "Shortcut key for enabling powersave modes right away."
},
{
.name = "Dim display",
.priv = &idle_display_dim_after,
.update = idle_display_dim_print,
.select = idle_timeout_toggle,
.max = 900,
.icon_type = IT_PERCENT_LOG_OFF,
.help = "Dim LCD display in LiveView when idle, to save power.",
},
{
.name = "Turn off LCD",
.priv = &idle_display_turn_off_after,
.update = idle_display_feature_print,
.select = idle_timeout_toggle,
.max = 900,
.icon_type = IT_PERCENT_LOG_OFF,
.help = "Turn off display and pause LiveView when idle and not REC.",
},
{
.name = "Turn off GlobalDraw",
.priv = &idle_display_global_draw_off_after,
.update = idle_display_feature_print,
.select = idle_timeout_toggle,
.max = 900,
.icon_type = IT_PERCENT_LOG_OFF,
.help = "Turn off GlobalDraw when idle, to save some CPU cycles.",
//~ .edit_mode = EM_MANY_VALUES,
},
MENU_EOL
},
}
};
static void powersave_init()
{
menu_add( "Prefs", powersave_menus, COUNT(powersave_menus) );
}
INIT_FUNC(__FILE__, powersave_init);
#else
/* some dummy stubs to compile without FEATURE_POWERSAVE_LIVEVIEW */
void idle_wakeup_reset_counters(int reason) { }
int handle_powersave_key(struct event * event) { return 1; }
int idle_is_powersave_active() { return 0; }
int idle_is_powersave_enabled_on_info_disp_key() { return 0; }
void idle_globaldraw_dis() { }
void idle_globaldraw_en() { }
void idle_force_powersave_now() { }
void idle_force_powersave_in_1s() { }
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...