| 32ef438 | Dave Hansen | 20 September 2011, 22:19:41 UTC | teach /proc/$pid/numa_maps about transparent hugepages This is modeled after the smaps code. It detects transparent hugepages and then does a single gather_stats() for the page as a whole. This has two benifits: 1. It is more efficient since it does many pages in a single shot. 2. It does not have to break down the huge page. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 September 2011, 20:15:44 UTC |
| 3200a8a | Dave Hansen | 20 September 2011, 22:19:39 UTC | break out numa_maps gather_pte_stats() checks gather_pte_stats() does a number of checks on a target page to see whether it should even be considered for statistics. This breaks that code out in to a separate function so that we can use it in the transparent hugepage case in the next patch. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: Christoph Lameter <cl@gentwo.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 September 2011, 20:15:44 UTC |
| eb4866d | Dave Hansen | 20 September 2011, 22:19:38 UTC | make /proc/$pid/numa_maps gather_stats() take variable page size We need to teach the numa_maps code about transparent huge pages. The first step is to teach gather_stats() that the pte it is dealing with might represent more than one page. Note that will we use this in a moment for transparent huge pages since they have use a single pmd_t which _acts_ as a "surrogate" for a bunch of smaller pte_t's. I'm a _bit_ unhappy that this interface counts in hugetlbfs page sizes for hugetlbfs pages and PAGE_SIZE for normal pages. That means that to figure out how many _bytes_ "dirty=1" means, you must first know the hugetlbfs page size. That's easier said than done especially if you don't have visibility in to the mount. But, that's probably a discussion for another day especially since it would change behavior to fix it. But, just in case anyone wonders why this patch only passes a '1' in the hugetlb case... Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 September 2011, 20:15:44 UTC |
| 38867a2 | Linus Torvalds | 20 September 2011, 21:23:16 UTC | Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc * 'fixes' of git://git.linaro.org/people/arnd/arm-soc: mach-integrator: fix VGA base regression arm/dt: Tegra: Update SDHCI nodes to match bindings ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines ARM: SAMSUNG: fix to prevent declaring duplicated ARM: SAMSUNG: fix watchdog reset issue with clk_get() ARM: S3C64XX: Remove un-used code backlight code on SMDK6410 ARM: EXYNOS4: restart clocksource while system resumes ARM: EXYNOS4: Fix routing timer interrupt to offline CPU ARM: EXYNOS4: Fix return type of local_timer_setup() ARM: EXYNOS4: Fix wrong pll type for vpll ARM: Dove: fix second SPI initialization call | 20 September 2011, 21:23:16 UTC |
| 43a964a | Linus Torvalds | 20 September 2011, 21:22:55 UTC | Merge branch 'for-linus' of git://github.com/chrismason/linux * 'for-linus' of git://github.com/chrismason/linux: Btrfs: reserve sufficient space for ioctl clone | 20 September 2011, 21:22:55 UTC |
| 8097680 | Seth Jennings | 20 September 2011, 20:09:56 UTC | staging: zcache: fix cleancache crash After commit c5f5c4db3938 ("staging: zcache: fix crash on high memory swap") cleancache crashes on the first successful get. This was caused by a remaining virt_to_page() call in zcache_pampd_get_data_and_free() that only gets run in the cleancache path. The patch converts the virt_to_page() to struct page casting like was done for other instances in c5f5c4db3938. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 21:17:13 UTC |
| b71d842 | Linus Walleij | 04 September 2011, 21:40:08 UTC | mach-integrator: fix VGA base regression The changes introduced in commit cc22b4c18540e5e8bf55c7d124044f9317527d3c "ARM: set vga memory base at run-time" Makes the Integrator/AP freeze completely. I appears that this is due to the VGA base address being assigned at PCI init time, while this base is needed earlier than that. Moving the initialization of the base address to the .map_io function solves this problem. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 20 September 2011, 20:58:41 UTC |
| a0638eb | Stephen Warren | 20 September 2011, 16:46:25 UTC | arm/dt: Tegra: Update SDHCI nodes to match bindings The bindings were recently updated to have separate properties for each type of GPIO. Update the Device Tree source to match that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 20 September 2011, 20:56:53 UTC |
| 0a7a051 | Chris Mason | 20 September 2011, 18:49:29 UTC | Merge branch 'btrfs-3.0' into for-linus | 20 September 2011, 18:49:29 UTC |
| b6f3409 | Sage Weil | 20 September 2011, 18:48:51 UTC | Btrfs: reserve sufficient space for ioctl clone Fix a crash/BUG_ON in the clone ioctl due to insufficient reservation. We need to reserve space for: - adjusting the old extent (possibly splitting it) - adding the new extent - updating the inode Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 20 September 2011, 18:48:51 UTC |
| 2838888 | Linus Torvalds | 20 September 2011, 17:28:52 UTC | Merge git://git.samba.org/sfrench/cifs-2.6 * git://git.samba.org/sfrench/cifs-2.6: cifs: Fix broken sec=ntlmv2/i sec option (try #2) Fix the conflict between rwpidforward and rw mount options CIFS: Fix ERR_PTR dereference in cifs_get_root cifs: fix possible memory corruption in CIFSFindNext | 20 September 2011, 17:28:52 UTC |
| d006de9 | Linus Torvalds | 20 September 2011, 17:24:46 UTC | Merge git://www.linux-watchdog.org/linux-watchdog * git://www.linux-watchdog.org/linux-watchdog: watchdog: Initconst section fixes for watchdog watchdog: lantiq: fix watchdogs timeout handling watchdog: hpwdt: prevent multiple "NMI occurred" messages watchdog: WatchDog Timer Driver Core - use passed watchdog_device | 20 September 2011, 17:24:46 UTC |
| 0ad79ed | Linus Torvalds | 20 September 2011, 17:21:52 UTC | Merge branch 'for-linus' of git://github.com/tiwai/sound * 'for-linus' of git://github.com/tiwai/sound: ALSA: HDA: Add support for IDT 92HD93 ALSA: hda/realtek - Fix auto-mute with HP+LO configuration | 20 September 2011, 17:21:52 UTC |
| 4e8858d | Andi Kleen | 15 September 2011, 20:09:51 UTC | watchdog: Initconst section fixes for watchdog Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 20 September 2011, 12:32:00 UTC |
| 9cfce47 | John Crispin | 24 August 2011, 08:31:39 UTC | watchdog: lantiq: fix watchdogs timeout handling The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org | 20 September 2011, 12:28:24 UTC |
| dbc018e | Naga Chumbalkar | 09 August 2011, 22:27:26 UTC | watchdog: hpwdt: prevent multiple "NMI occurred" messages On platforms with no iCRU support don't print two, (possibly conflicting), "NMI occurred" messages when the firmware is unable to source the NMI. Please note that one of the enhancements to the v1.3.0 hpwdt driver is to panic and allow KDUMP to succeed even on NMIs that are unknown to the platform firmware. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 20 September 2011, 12:24:54 UTC |
| cb7efc0 | H Hartley Sweeten | 03 August 2011, 22:38:20 UTC | watchdog: WatchDog Timer Driver Core - use passed watchdog_device Use the passed watchdog_device instead of the static global variable when testing and setting the status in watchdog_ping, watchdog_start, and watchdog_stop. Note that the callers of these functions are actually passing the static global variable. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 20 September 2011, 12:22:28 UTC |
| 46724c2 | David Henningsson | 20 September 2011, 07:02:22 UTC | ALSA: HDA: Add support for IDT 92HD93 Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 20 September 2011, 07:13:18 UTC |
| cfbd6f8 | Shirish Pargaonkar | 25 August 2011, 04:05:46 UTC | cifs: Fix broken sec=ntlmv2/i sec option (try #2) Fix sec=ntlmv2/i authentication option during mount of Samba shares. cifs client was coding ntlmv2 response incorrectly. All that is needed in temp as specified in MS-NLMP seciton 3.3.2 "Define ComputeResponse(NegFlg, ResponseKeyNT, ResponseKeyLM, CHALLENGE_MESSAGE.ServerChallenge, ClientChallenge, Time, ServerName) as Set temp to ConcatenationOf(Responserversion, HiResponserversion, Z(6), Time, ClientChallenge, Z(4), ServerName, Z(4)" is MsvAvNbDomainName. For sec=ntlmsspi, build_av_pair is not used, a blob is plucked from type 2 response sent by the server to use in authentication. I tested sec=ntlmv2/i and sec=ntlmssp/i mount options against Samba (3.6) and Windows - XP, 2003 Server and 7. They all worked. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 20 September 2011, 02:16:58 UTC |
| c9c7fa0 | Steve French | 29 August 2011, 18:54:12 UTC | Fix the conflict between rwpidforward and rw mount options Both these options are started with "rw" - that's why the first one isn't switched on even if it is specified. Fix this by adding a length check for "rw" option check. Cc: <stable@kernel.org> Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com> | 20 September 2011, 02:16:20 UTC |
| 5b980b0 | Pavel Shilovsky | 21 August 2011, 15:30:15 UTC | CIFS: Fix ERR_PTR dereference in cifs_get_root move it to the beginning of the loop. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 20 September 2011, 02:15:03 UTC |
| 9438fab | Jeff Layton | 23 August 2011, 11:21:28 UTC | cifs: fix possible memory corruption in CIFSFindNext The name_len variable in CIFSFindNext is a signed int that gets set to the resume_name_len in the cifs_search_info. The resume_name_len however is unsigned and for some infolevels is populated directly from a 32 bit value sent by the server. If the server sends a very large value for this, then that value could look negative when converted to a signed int. That would make that value pass the PATH_MAX check later in CIFSFindNext. The name_len would then be used as a length value for a memcpy. It would then be treated as unsigned again, and the memcpy scribbles over a ton of memory. Fix this by making the name_len an unsigned value in CIFSFindNext. Cc: <stable@kernel.org> Reported-by: Darren Lavender <dcl@hppine99.gbr.hp.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 20 September 2011, 02:14:40 UTC |
| 9d037a7 | Linus Torvalds | 20 September 2011, 00:23:41 UTC | Merge branch 'irq-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'irq-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86, iommu: Mark DMAR IRQ as non-threaded genirq: Make irq_shutdown() symmetric vs. irq_startup again | 20 September 2011, 00:23:41 UTC |
| 50f2d40 | Linus Torvalds | 20 September 2011, 00:17:32 UTC | Merge branch 'for-linus' of git://github.com/chrismason/linux * 'for-linus' of git://github.com/chrismason/linux: Btrfs: only clear the need lookup flag after the dentry is setup BTRFS: Fix lseek return value for error Btrfs: don't change inode flag of the dest clone file Btrfs: don't make a file partly checksummed through file clone Btrfs: fix pages truncation in btrfs_ioctl_clone() btrfs: fix d_off in the first dirent | 20 September 2011, 00:17:32 UTC |
| c2d7b49 | Andiry Xu | 19 September 2011, 23:05:12 UTC | USB: xHCI: prevent infinite loop when processing MSE event When a xHC host is unable to handle isochronous transfer in the interval, it reports a Missed Service Error event and skips some tds. Currently xhci driver handles MSE event in the following ways: 1. When encounter a MSE event, set ep->skip flag, update event ring dequeue pointer and return. 2. When encounter the next event on this ep, the driver will run the do-while loop, fetch td from ep's td_list to find the td corresponding to this event. All tds missed are marked as short transfer(-EXDEV). The do-while loop will end in two ways: 1. If the td pointed by the event trb is found; 2. If the ep ring's td_list is empty. However, if a buggy HW reports some unpredicted event (for example, an overrun event following a MSE event while the ep ring is actually not empty), the driver will never find the td, and it will loop until the td_list is empty. Unfortunately, the spinlock is dropped when give back a urb in the do-while loop. During the spinlock released period, the class driver may still submit urbs and add tds to the td_list. This may cause disaster, since the td_list will never be empty and the loop never ends, and the system hangs. To fix this, count the number of TDs on the ep ring before skipping TDs, and quit the loop when skipped that number of tds. This guarantees the do-while loop will end after certain number of cycles, and driver will not be trapped in an infinite loop. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 00:15:47 UTC |
| 44f4c3e | Greg KH | 19 September 2011, 23:05:11 UTC | USB: xhci: Set change bit when warm reset change is set. Sometimes, when a USB 3.0 device is disconnected, the Intel Panther Point xHCI host controller will report a link state change with the state set to "SS.Inactive". This causes the xHCI host controller to issue a warm port reset, which doesn't finish before the USB core times out while waiting for it to complete. When the warm port reset does complete, and the xHC gives back a port status change event, the xHCI driver kicks khubd. However, it fails to set the bit indicating there is a change event for that port because the logic in xhci-hub.c doesn't check for the warm port reset bit. After that, the warm port status change bit is never cleared by the USB core, and the xHC stops reporting port status change bits. (The xHCI spec says it shouldn't report more port events until all change bits are cleared.) This means any port changes when a new device is connected will never be reported, and the port will seem "dead" until the xHCI driver is unloaded and reloaded, or the computer is rebooted. Fix this by making the xHCI driver set the port change bit when a warm port reset change bit is set. A better solution would be to make the USB core handle warm port reset in differently, merging the current code with the standard port reset code that does an incremental backoff on the timeout, and tries to complete the port reset two more times before giving up. That more complicated fix will be merged next window, and this fix will be backported to stable. This should be backported to kernels as old as 3.0, since that was the first kernel with commit a11496ebf375 ("xHCI: warm reset support"). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 00:15:46 UTC |
| c19cc78 | Randy Dunlap | 19 September 2011, 23:05:10 UTC | staging: fix comedi build when ISA_DMA_API is enabled but COMEDI_PCI is not enabled Fix build when CONFIG_ISA_DMA_API is enabled but CONFIG_COMEDI_PCI[_DRIVERS] is not enabled. Fixes these build errors: drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd': drivers/staging/comedi/drivers/ni_labpc.c:1351: error: implicit declaration of function 'labpc_suggest_transfer_size' drivers/staging/comedi/drivers/ni_labpc.c: At top level: drivers/staging/comedi/drivers/ni_labpc.c:1802: error: conflicting types for 'labpc_suggest_transfer_size' drivers/staging/comedi/drivers/ni_labpc.c:1351: note: previous implicit declaration of 'labpc_suggest_transfer_size' was here Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 00:15:46 UTC |
| 58c3c3a | Linus Torvalds | 20 September 2011, 00:10:57 UTC | Make taskstats round statistics down to nearest 1k bytes/events Even with just the interface limited to admin, there really is little to reason to give byte-per-byte counts for taskstats. So round it down to something less intrusive. Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 00:10:57 UTC |
| 1a51410 | Linus Torvalds | 20 September 2011, 00:04:37 UTC | Make TASKSTATS require root access Ok, this isn't optimal, since it means that 'iotop' needs admin capabilities, and we may have to work on this some more. But at the same time it is very much not acceptable to let anybody just read anybody elses IO statistics quite at this level. Use of the GENL_ADMIN_PERM suggested by Johannes Berg as an alternative to checking the capabilities by hand. Reported-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Johannes Berg <johannes.berg@intel.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2011, 00:04:37 UTC |
| b6a68a5 | Linus Torvalds | 19 September 2011, 15:02:41 UTC | Merge branch 'slab/urgent' of git://github.com/penberg/linux * 'slab/urgent' of git://github.com/penberg/linux: slub: add slab with one free object to partial list tail | 19 September 2011, 15:02:41 UTC |
| 6d7c2b4 | Linus Torvalds | 19 September 2011, 14:55:43 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2) drm/radeon/kms: fix typo in r100_blit_copy drm/radeon: Unreference GEM object outside of spinlock in page flip error path. drm/radeon: Don't read from CP ring write pointer registers. drm/ttm: request zeroed system memory pages for new TT buffer objects | 19 September 2011, 14:55:43 UTC |
| 1f0772f | Linus Torvalds | 19 September 2011, 14:48:04 UTC | Merge git://github.com/davem330/net * git://github.com/davem330/net: tcp: fix validation of D-SACK tcp: fix build error if !CONFIG_SYN_COOKIES | 19 September 2011, 14:48:04 UTC |
| 8974bd5 | Takashi Iwai | 19 September 2011, 09:31:34 UTC | ALSA: hda/realtek - Fix auto-mute with HP+LO configuration When the system has only the headphone and the line-out jacks without speakers, the current auto-mute code doesn't work. It's because the spec->automute_lines flag is wrongly referred in update_speakers(). This flag must be meaningless when spec->automute_hp_lo isn't set, thus they should be always coupled. The patch fixes the problem and add a comment to indicate the relationship briefly. BugLink: http://bugs.launchpad.net/bugs/851697 Reported-by: David Henningsson <david.henningsson@canonical.com> Tested-By: Jayne Han <jayne.han@canonical.com> Cc: stable@kernel.org (3.0) Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 September 2011, 09:31:34 UTC |
| f779b2d | Zheng Yan | 19 September 2011, 02:37:34 UTC | tcp: fix validation of D-SACK D-SACK is allowed to reside below snd_una. But the corresponding check in tcp_is_sackblock_valid() is the exact opposite. It looks like a typo. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 September 2011, 02:37:34 UTC |
| e05c82d | Eric Dumazet | 19 September 2011, 01:02:55 UTC | tcp: fix build error if !CONFIG_SYN_COOKIES commit 946cedccbd7387 (tcp: Change possible SYN flooding messages) added a build error if CONFIG_SYN_COOKIES=n Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 September 2011, 01:48:01 UTC |
| 6bf3b0d | Linus Torvalds | 19 September 2011, 01:18:55 UTC | Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6 * 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix omap-usb-host build failure mfd: Make omap-usb-host TLL mode work again mfd: Set MAX8997 irq pointer mfd: Fix initialisation of tps65910 interrupts mfd: Check for twl4030-madc NULL pointer mfd: Copy the device pointer to the twl4030-madc structure mfd: Rename wm8350 static gpio_set_debounce() mfd: Fix value of WM8994_CONFIGURE_GPIO | 19 September 2011, 01:18:55 UTC |
| 003cefe | Alex Deucher | 16 September 2011, 16:04:08 UTC | drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2) The BO blit code inconsistenly handled the page size. This wasn't an issue on system with 4k pages since the GPU's page size is 4k as well. Switch the driver blit callbacks to take num pages in GPU page units. Fixes lemote mipsel systems using AMD rs780/rs880 chipsets. v2: incorporate suggestions from Michel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 18 September 2011, 18:44:36 UTC |
| 18b4fad | Alex Deucher | 16 September 2011, 16:04:07 UTC | drm/radeon/kms: fix typo in r100_blit_copy cur_pages is the number of pages per loop iteration. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 18 September 2011, 18:43:42 UTC |
| b0e7031 | Linus Torvalds | 18 September 2011, 18:02:26 UTC | Merge git://github.com/davem330/net * git://github.com/davem330/net: (62 commits) ipv6: don't use inetpeer to store metrics for routes. can: ti_hecc: include linux/io.h IRDA: Fix global type conflicts in net/irda/irsysctl.c v2 net: Handle different key sizes between address families in flow cache net: Align AF-specific flowi structs to long ipv4: Fix fib_info->fib_metrics leak caif: fix a potential NULL dereference sctp: deal with multiple COOKIE_ECHO chunks ibmveth: Fix checksum offload failure handling ibmveth: Checksum offload is always disabled ibmveth: Fix issue with DMA mapping failure ibmveth: Fix DMA unmap error pch_gbe: support ML7831 IOH pch_gbe: added the process of FIFO over run error pch_gbe: fixed the issue which receives an unnecessary packet. sfc: Use 64-bit writes for TX push where possible Revert "sfc: Use write-combining to reduce TX latency" and follow-ups bnx2x: Fix ethtool advertisement bnx2x: Fix 578xx link LED bnx2x: Fix XMAC loopback test ... | 18 September 2011, 18:02:26 UTC |
| a66e7cc | Josef Bacik | 18 September 2011, 14:34:03 UTC | Btrfs: only clear the need lookup flag after the dentry is setup We can race with readdir and the RCU path walking stuff. This is because we clear the need lookup flag before actually instantiating the inode. This will lead the RCU path walk stuff to find a dentry it thinks is valid without a d_inode attached. So instead unhash the dentry when we first start the lookup, and then clear the flag after we've instantiated the dentry so we're garunteed to either try the slow lookup, or have the d_inode set properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:34:03 UTC |
| 48802c8 | Jeff Liu | 18 September 2011, 14:34:02 UTC | BTRFS: Fix lseek return value for error The recent reworking of btrfs' lseek lead to incorrect values being returned. This adds checks for seeking beyond EOF in SEEK_HOLE and makes sure the error values come back correct. Andi Kleen also sent in similar patches. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:34:02 UTC |
| 2cf4ce7 | Chris Mason | 18 September 2011, 14:31:44 UTC | Merge branch 'btrfs-3.0' into for-linus | 18 September 2011, 14:31:44 UTC |
| dde820f | Li Zefan | 18 September 2011, 14:20:46 UTC | Btrfs: don't change inode flag of the dest clone file The dst file will have the same inode flags with dst file after file clone, and I think it's unexpected. For example, the dst file will suddenly become immutable after getting some share of data with src file, if the src is immutable. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:20:46 UTC |
| 0e7b824 | Li Zefan | 18 September 2011, 14:20:46 UTC | Btrfs: don't make a file partly checksummed through file clone To reproduce the bug: # mount /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/src bs=4K count=1 # umount /mnt # mount -o nodatasum /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/dst bs=4K count=1 # clone_range -s 4K -l 4K /mnt/src /mnt/dst # echo 3 > /proc/sys/vm/drop_caches # cat /mnt/dst # dmesg ... btrfs no csum found for inode 258 start 0 btrfs csum failed ino 258 off 0 csum 2566472073 private 0 It's because part of the file is checksummed and the other part is not, and then btrfs will complain checksum is not found when we read the file. Disallow file clone if src and dst file have different checksum flag, so we ensure a file is completely checksummed or unchecksummed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:20:46 UTC |
| 71ef078 | Li Zefan | 18 September 2011, 14:20:46 UTC | Btrfs: fix pages truncation in btrfs_ioctl_clone() It's a bug in commit f81c9cdc567cd3160ff9e64868d9a1a7ee226480 (Btrfs: truncate pages from clone ioctl target range) We should pass the dest range to the truncate function, but not the src range. Also move the function before locking extent state. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:20:46 UTC |
| 3765fef | Hidetoshi Seto | 18 September 2011, 14:20:46 UTC | btrfs: fix d_off in the first dirent Since the d_off in the first dirent for "." (that originates from the 4th argument "offset" of filldir() for the 2nd dirent for "..") is wrongly assigned in btrfs_real_readdir(), telldir returns same offset for different locations. | # mkfs.btrfs /dev/sdb1 | # mount /dev/sdb1 fs0 | # cd fs0 | # touch file0 file1 | # ../test | telldir: 0 | readdir: d_off = 2, d_name = "." | telldir: 2 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" | telldir: 3 | readdir: d_off = 2147483647, d_name = "file1" | telldir: 2147483647 To fix this problem, pass filp->f_pos (which is loff_t) instead. | # ../test | telldir: 0 | readdir: d_off = 1, d_name = "." | telldir: 1 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" : At the moment the "offset" for "." is unused because there is no preceding dirent, however it is better to pass filp->f_pos to follow grammatical usage. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 18 September 2011, 14:20:46 UTC |
| 01a7143 | Linus Torvalds | 17 September 2011, 23:54:41 UTC | Merge branch 'fixes' of git://git.user.in-berlin.de/s5r6/linux1394 * 'fixes' of git://git.user.in-berlin.de/s5r6/linux1394: firewire: ohci: add no MSI quirk for O2Micro controller | 17 September 2011, 23:54:41 UTC |
| 4be0ed4 | Linus Torvalds | 17 September 2011, 23:52:13 UTC | Merge branch '3.1-rc-fixes' of git://linux-iscsi.org/target-pending * '3.1-rc-fixes' of git://linux-iscsi.org/target-pending: iscsi-target: Fix sendpage breakage with proper padding+DataDigest iovec offsets iscsi-target: Disable markers + remove dangerous local scope array usage target: Skip non hex characters for VPD=0x83 NAA IEEE Registered Extended tcm_fc: Work queue based approach instead of managing own thread and event based mechanism tcm_fc: Invalidation of DDP context for FCoE target in error conditions target: Fix race between multiple invocations of target_qf_do_work() | 17 September 2011, 23:52:13 UTC |
| 8e2ec63 | Yan, Zheng | 05 September 2011, 21:34:30 UTC | ipv6: don't use inetpeer to store metrics for routes. Current IPv6 implementation uses inetpeer to store metrics for routes. The problem of inetpeer is that it doesn't take subnet prefix length in to consideration. If two routes have the same address but different prefix length, they share same inetpeer. So changing metrics of one route also affects the other. The fix is to allocate separate metrics storage for each route. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 17 September 2011, 04:57:26 UTC |
| 40b0549 | Nicholas Bellinger | 16 September 2011, 23:55:47 UTC | iscsi-target: Fix sendpage breakage with proper padding+DataDigest iovec offsets This patch fixes a bug in the iscsit_fe_sendpage_sg() transmit codepath that was originally introduced with the v3.1 iscsi-target merge that incorrectly uses hardcoded cmd->iov_data_count values to determine cmd->iov_data[] offsets for extra outgoing padding and DataDigest payload vectors. This code is obviously incorrect for the DataDigest enabled case with sendpage offload, and this fix ensures correct operation for padding + DataDigest, padding only, and DataDigest only cases. The bug was introduced during a pre-merge change in iscsit_fe_sendpage_sg() to natively use struct scatterlist instead of the legacy v3.0 struct se_mem logic. Cc: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 23:47:07 UTC |
| 34b8686 | Daniel Mack | 16 September 2011, 07:57:43 UTC | can: ti_hecc: include linux/io.h This fixes a build breakage for OMAP3 boards. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: netdev@vger.kernel.org Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 23:21:27 UTC |
| 9566042 | Andi Kleen | 16 September 2011, 09:09:50 UTC | IRDA: Fix global type conflicts in net/irda/irsysctl.c v2 The externs here didn't agree with the declarations in qos.c. Better would be probably to move this into a header, but since it's common practice to have naked externs with sysctls I left it for now. Cc: samuel@sortiz.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 23:17:09 UTC |
| aa1c366 | dpward | 05 September 2011, 16:47:24 UTC | net: Handle different key sizes between address families in flow cache With the conversion of struct flowi to a union of AF-specific structs, some operations on the flow cache need to account for the exact size of the key. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 21:47:28 UTC |
| 728871b | David Ward | 05 September 2011, 16:47:23 UTC | net: Align AF-specific flowi structs to long AF-specific flowi structs are now passed to flow_key_compare, which must also be aligned to a long. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 21:45:07 UTC |
| 19c1ea1 | Yan, Zheng | 04 September 2011, 20:24:20 UTC | ipv4: Fix fib_info->fib_metrics leak Commit 4670994d(net,rcu: convert call_rcu(fc_rport_free_rcu) to kfree_rcu()) introduced a memory leak. This patch reverts it. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 21:42:26 UTC |
| 4fb66b8 | Eric Dumazet | 02 September 2011, 02:19:23 UTC | caif: fix a potential NULL dereference Commit bd30ce4bc0b7 (caif: Use RCU instead of spin-lock in caif_dev.c) added a potential NULL dereference in case alloc_percpu() fails. caif_device_alloc() can also use GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 21:40:34 UTC |
| d5ccd49 | Max Matveev | 29 August 2011, 21:02:24 UTC | sctp: deal with multiple COOKIE_ECHO chunks Attempt to reduce the number of IP packets emitted in response to single SCTP packet (2e3216cd) introduced a complication - if a packet contains two COOKIE_ECHO chunks and nothing else then SCTP state machine corks the socket while processing first COOKIE_ECHO and then loses the association and forgets to uncork the socket. To deal with the issue add new SCTP command which can be used to set association explictly. Use this new command when processing second COOKIE_ECHO chunk to restore the context for SCTP state machine. Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 21:17:22 UTC |
| 279b1e0 | Linus Torvalds | 16 September 2011, 21:09:19 UTC | Merge branch 'for-linus' of git://github.com/dtor/input * 'for-linus' of git://github.com/dtor/input: Input: wacom - fix touch parsing on newer Bamboos Input: bcm5974 - add MacBookAir4,1 trackpad support Input: wacom - add POINTER and DIRECT device properties Input: adp5588-keys - remove incorrect modalias Input: cm109 - fix checking return value of usb_control_msg Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner Input: wacom - remove pressure for touch devices | 16 September 2011, 21:09:19 UTC |
| f39aa30 | Ming Lei | 31 August 2011, 02:45:46 UTC | firewire: ohci: add no MSI quirk for O2Micro controller This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719 . An O2Micro PCI Express FireWire controller, "FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Device [1217:11f7] (rev 05)" which is a combination device together with an SDHCI controller and some sort of storage controller, misses SBP-2 status writes from an attached FireWire HDD. This problem goes away if MSI is disabled for this FireWire controller. The device reportedly does not require QUIRK_CYCLE_TIMER. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (amended changelog) Cc: <stable@kernel.org> | 16 September 2011, 20:22:10 UTC |
| 2ff017f | Nicholas Bellinger | 16 September 2011, 08:44:54 UTC | iscsi-target: Disable markers + remove dangerous local scope array usage This patch makes iscsi-target explictly disable OFMarker=Yes and IFMarker=yes parameter key usage during iscsi login by setting IFMarkInt_Reject and OFMarkInt_Reject values in iscsi_enforce_integrity_rules() to effectively disable iscsi marker usage. With this patch, an initiator proposer asking to enable either marker parameter keys will be issued a 'No' response, and the target sets OFMarkInt + IFMarkInt parameter key response to 'Irrelevant'. With markers disabled during iscsi login, this patch removes the problematic on-stack local-scope array for marker intervals in iscsit_do_rx_data() + iscsit_do_tx_data(), and other related marker code in iscsi_target_util.c. This fixes a potentional stack smashing scenario with small range markers enabled and a large MRDSL as reported by DanC here: [bug report] target: stack can be smashed http://www.spinics.net/lists/target-devel/msg00453.html Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 19:37:18 UTC |
| 784eb99 | Nicholas Bellinger | 16 September 2011, 08:31:28 UTC | target: Skip non hex characters for VPD=0x83 NAA IEEE Registered Extended This patch adds target_parse_naa_6h_vendor_specific() to address a bug where the conversion of PRODUCT SERIAL NUMBER to use hex2bin() in target_emulate_evpd_83() was not doing proper isxdigit() checking. This conversion of the vpd_unit_serial configifs attribute is done while generating a VPD=0x83 NAA IEEE Registered Extended DESIGNATOR format's 100 bits of unique VENDOR SPECIFIC IDENTIFIER + VENDOR SPECIFIC IDENTIFIER EXTENSION area. This patch allows vpd_unit_serial (VPD=0x80) and the T10 Vendor ID DESIGNATOR format (VPD=0x83) to continue to use free-form variable length ASCII values, and now skips any non hex characters for fixed length NAA IEEE Registered Extended DESIGNATOR format (VPD=0x83) requring the binary conversion. This was originally reported by Martin after the v3.1-rc1 change to use hex2bin() in commit 11650b859681e03fdbf26277fcfc5f1f62186703 where the use of non hex characters in vpd_unit_serial generated different values than the original v3.0 internal hex -> binary code. This v3.1 change caused a problem with filesystems who write a NAA DESIGNATOR onto it's ondisk metadata, and this patch will (again) change existing values to ensure that non hex characters are not included in the fixed length NAA DESIGNATOR. Note this patch still expects vpd_unit_serial to be set via existing userspace methods of uuid generation, and does not do strict formatting via configfs input. The original bug report and thread can be found here: NAA breakage http://www.spinics.net/lists/target-devel/msg00477.html The v3.1-rc1 formatting of VPD=0x83 w/o this patch: VPD INQUIRY: Device Identification page Designation descriptor number 1, descriptor length: 20 designator_type: NAA, code_set: Binary associated with the addressed logical unit NAA 6, IEEE Company_id: 0x1405 Vendor Specific Identifier: 0xffde35ebf Vendor Specific Identifier Extension: 0x3092f498ffa820f9 [0x6001405ffde35ebf3092f498ffa820f9] Designation descriptor number 2, descriptor length: 56 designator_type: T10 vendor identification, code_set: ASCII associated with the addressed logical unit vendor id: LIO-ORG vendor specific: IBLOCK:ffde35ec-3092-4980-a820-917636ca54f1 The v3.1-final formatting of VPD=0x83 w/ this patch: VPD INQUIRY: Device Identification page Designation descriptor number 1, descriptor length: 20 designator_type: NAA, code_set: Binary associated with the addressed logical unit NAA 6, IEEE Company_id: 0x1405 Vendor Specific Identifier: 0xffde35ec3 Vendor Specific Identifier Extension: 0x924980a82091763 [0x6001405ffde35ec30924980a82091763] Designation descriptor number 2, descriptor length: 56 designator_type: T10 vendor identification, code_set: ASCII associated with the addressed logical unit vendor id: LIO-ORG vendor specific: IBLOCK:ffde35ec-3092-4980-a820-917636ca54f1 (v2: Fix parsing code to dereference + check for string terminator instead of null pointer to ensure a zeroed payload for vpd_unit_serial less than 100 bits of NAA DESIGNATOR VENDOR SPECIFIC area. Also, remove the unnecessary bitwise assignment) Reported-by: Martin Svec <martin.svec@zoner.cz> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 19:36:56 UTC |
| fb82fd2 | Anton Blanchard | 07 September 2011, 14:41:06 UTC | ibmveth: Fix checksum offload failure handling Fix a number of issues in ibmveth_set_csum_offload: - set_attr6 and clr_attr6 may be used uninitialised - We store the result of the IPV4 checksum change in ret but overwrite it in a couple of places before checking it again later. Add ret4 to make it obvious what we are doing. - We weren't clearing the NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM flags if the enable of that hypervisor feature failed. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 19:26:32 UTC |
| 91aae1e | Anton Blanchard | 07 September 2011, 14:41:05 UTC | ibmveth: Checksum offload is always disabled Commit b9367bf3ee6d (net: ibmveth: convert to hw_features) reversed a check in ibmveth_set_csum_offload that results in checksum offload never being enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 19:26:32 UTC |
| b93da27 | Anton Blanchard | 07 September 2011, 14:41:04 UTC | ibmveth: Fix issue with DMA mapping failure descs[].fields.address is 32bit which truncates any dma mapping errors so dma_mapping_error() fails to catch it. Use a dma_addr_t to do the comparison. With this patch I was able to transfer many gigabytes of data with IOMMU fault injection set at 10% probability. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # v2.6.37+ Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 19:26:32 UTC |
| 33a48ab | Brian King | 07 September 2011, 14:41:03 UTC | ibmveth: Fix DMA unmap error Commit 6e8ab30ec677 (ibmveth: Add scatter-gather support) introduced a DMA mapping API inconsistency resulting in dma_unmap_page getting called on memory mapped via dma_map_single. This was seen when CONFIG_DMA_API_DEBUG was enabled. Fix up this API usage inconsistency. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # v2.6.37+ Signed-off-by: David S. Miller <davem@davemloft.net> | 16 September 2011, 19:26:32 UTC |
| abbe0d3 | Linus Torvalds | 16 September 2011, 18:28:11 UTC | Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen * 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen: xen/i386: follow-up to "replace order-based range checking of M2P table by linear one" xen/irq: Alter the locking to use a mutex instead of a spinlock. xen/e820: if there is no dom0_mem=, don't tweak extra_pages. xen: disable PV spinlocks on HVM | 16 September 2011, 18:28:11 UTC |
| 58fc73d | Christoph Hellwig | 26 August 2011, 16:25:38 UTC | tcm_fc: Work queue based approach instead of managing own thread and event based mechanism Problem: Changed from wake_up_interruptible -> wake_up_process and wait_event_interruptible-> schedule_timeout_interruptible broke the FCoE target. Earlier approach of wake_up_interruptible was also looking at 'queue_cnt' which is not necessary, because it increment of 'queue_cnt' with wake_up_inetrriptible / waker_up_process introduces race condition. Fix: Instead of fixing the code which used wake_up_process and remove 'queue_cnt', using work_queue based approach is cleaner and acheives same result. As well, work queue based approach has less programming overhead and OS manages threads which processes work queues. This patch is developed by Christoph Hellwig and reviwed+validated by Kiran Patil. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 09:50:09 UTC |
| 079587b | Kiran Patil | 26 August 2011, 16:25:25 UTC | tcm_fc: Invalidation of DDP context for FCoE target in error conditions Problem: HW DDP context wasn;t invalidated in case of ABORTS, etc... This leads to the problem where memory pages which are used for DDP as user descriptor could get reused for some other purpose (such as to satisfy new memory allocation request either by kernel or user mode threads) and since HW DDP context was not invalidated, HW continue to write to those pages, hence causing memory corruption. Fix: Either on incoming ABORTS or due to exchange time out, allowed the target to cleanup HW DDP context if it was setup for respective ft_cmd. Added new function to perform this cleanup, furthur it can be enhanced for other cleanup activity. Additinal Notes: To avoid calling ddp_done from multiple places, composed the functionality in helper function "ft_invl_hw_context" and it is being called from multiple places. Cleaned up code in function "ft_recv_write_data" w.r.t DDP. Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 09:29:27 UTC |
| bcac364 | Roland Dreier | 28 August 2011, 04:33:16 UTC | target: Fix race between multiple invocations of target_qf_do_work() When work is scheduled with schedule_work(), the work can end up running on multiple CPUs at the same time -- this happens if the work is already running on one CPU and schedule_work() is called on another CPU. This leads to list corruption with target_qf_do_work(), which is roughly doing: spin_lock(...); list_for_each_entry_safe(...) { list_del(...); spin_unlock(...); // do stuff spin_lock(...); } With multiple CPUs running this code, one CPU can end up deleting the list entry that the other CPU is about to work on. Fix this by splicing the list entries onto a local list and then operating on that in the work function. This way, each invocation of target_qf_do_work() operates on its own local list and so multiple invocations don't corrupt each other's list. This also avoids dropping and reacquiring the lock for each list entry. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 16 September 2011, 09:29:20 UTC |
| c455ea4 | Linus Torvalds | 16 September 2011, 05:13:48 UTC | Merge branch 'for-linus' of git://github.com/tiwai/sound * 'for-linus' of git://github.com/tiwai/sound: ALSA: pcm - fix race condition in wait_for_avail() ALSA: HDA: Cirrus - fix "Surround Speaker" volume control name ALSA: hda - Terminate the recursive connection search properly ASoC: Fix trivial build regression in Kirkwood I2S ASoC: Blackfin: bf5xx-ad193x: Fix codec device name ASoC: Fix reporting of partial jack updates ASoC: imx: Fix build warning of unused 'card' variable ASoC: Fix register cache sync register_writable WARN_ONs ASoC: snd_soc_codec_{readable,writable}_register change default to true ASoC: soc-dapm: Fix parameter comment for snd_soc_dapm_free MAINTAINERS: Add some missed Wolfson files ASoC: MPC5200: replace of_device with platform_device | 16 September 2011, 05:13:48 UTC |
| 52b9aca | David S. Miller | 16 September 2011, 05:09:02 UTC | Merge branch 'master' of ../netdev/ | 16 September 2011, 05:09:02 UTC |
| 7756332 | Toshiharu Okada | 01 September 2011, 14:20:09 UTC | pch_gbe: support ML7831 IOH Support new device OKI SEMICONDUCTOR ML7831 IOH(Input/Output Hub) ML7831 is for general purpose use. ML7831 is companion chip for Intel Atom E6xx series. ML7831 is completely compatible for Intel EG20T PCH. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 21:31:45 UTC |
| 124d770 | Toshiharu Okada | 01 September 2011, 14:20:08 UTC | pch_gbe: added the process of FIFO over run error This patch added the processing which should be done to hardware, when a FIFO over run error occurred. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 21:31:45 UTC |
| 5229d87 | Toshiharu Okada | 01 September 2011, 14:20:07 UTC | pch_gbe: fixed the issue which receives an unnecessary packet. This patch fixed the issue which receives an unnecessary packet before link When using PHY of GMII, an unnecessary packet is received, And it becomes impossible to receive a packet after link up. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 21:31:45 UTC |
| 483f97f | Ben Hutchings | 01 September 2011, 12:09:59 UTC | sfc: Use 64-bit writes for TX push where possible This was originally done as part of commit 65f0b417dee94f779ce9b77102b7d73c93723b39 ("sfc: Use write-combining to reduce TX latency"), but that had to be reverted. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 21:31:31 UTC |
| 86c432c | Ben Hutchings | 01 September 2011, 12:09:29 UTC | Revert "sfc: Use write-combining to reduce TX latency" and follow-ups This reverts commits 65f0b417dee94f779ce9b77102b7d73c93723b39, d88d6b05fee3cc78e5b0273eb58c31201dcc6b76, fcfa060468a4edcf776f0c1211d826d5de1668c1, 747df2258b1b9a2e25929ef496262c339c380009 and 867955f5682f7157fdafe8670804b9f8ea077bc7. Depending on the processor model, write-combining may result in reordering that the NIC will not tolerate. This typically results in a DMA error event and reset by the driver, logged as: sfc 0000:0e:00.0: eth2: TX DMA Q reports TX_EV_PKT_ERR. sfc 0000:0e:00.0: eth2: resetting (ALL) Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 21:31:28 UTC |
| 883cb07 | David S. Miller | 15 September 2011, 21:13:04 UTC | Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless | 15 September 2011, 21:13:04 UTC |
| a7f934d | Linus Torvalds | 15 September 2011, 20:28:33 UTC | asm alternatives: remove incorrect alignment notes On x86-64, they were just wasteful: with the explicitly added (now unnecessary) padding, the size of the alternatives structure was 16 bytes, and an alignment of 8 bytes didn't hurt much. However, it was still silly, since the natural size and alignment for the structure is actually just 12 bytes, 4-byte aligned since commit 59e97e4d6fbc ("x86: Make alternative instruction pointers relative"). So removing the padding, and removing the extra alignment is just a good idea. On x86-32, the alignment of 4 bytes was correct, but was incorrectly hardcoded as 8 bytes in <asm/alternative-asm.h>. That header file had used to be an x86-64 only header file, but various unification efforts have made it be used for x86-32 too (ie the unification of rwlock and rwsem). That in turn caused x86-32 boot failures, because the extra alignment would result in random zero-filled words in the altinstructions section, causing oopses early at boot when doing alternative instruction replacement. So just remove all the alignment noise entirely. It's wrong, and it's unnecessary. The section itself is already properly aligned by the linker scripts, and all additions to the section had better be of the proper 12-byte format, keeping it aligned. So if the align directive were to ever make a difference, that would be an indication of a serious bug to begin with. Reported-by: Werner Landgraf <w.landgraf@ru.r> Acked-by: Andrew Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 15 September 2011, 20:28:33 UTC |
| 8d66163 | Yaniv Rosner | 07 September 2011, 00:48:11 UTC | bnx2x: Fix ethtool advertisement Enable changing advertisement settings via ethtool. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| ab505de | Yaniv Rosner | 07 September 2011, 00:48:06 UTC | bnx2x: Fix 578xx link LED Fix 1G link LED for the BCM578xx-SFI/KR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| 4d7e25d | Yaniv Rosner | 07 September 2011, 00:48:03 UTC | bnx2x: Fix XMAC loopback test Change XMAC loopback type from CORE LOCAL to LINE LOCAL for the BCM578xx due to intermittent problem with the loopback with this configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| 0582242 | Yaniv Rosner | 07 September 2011, 00:47:58 UTC | bnx2x: Remove fiber remote fault detection Remove remote fault detection as a tactic retreat due to link issues involved with it. Once issue is resolved, this feature will be restored again. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| 6b1f390 | Yaniv Rosner | 07 September 2011, 00:47:54 UTC | bnx2x: Enable FEC for 57810-KR Enable FEC(Forward Error Correction) for 57810-KR to reduce link errors. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| c482e6c | Yaniv Rosner | 07 September 2011, 00:47:49 UTC | bnx2x: Fix ETS bandwidth ETS bandwidth of 0% is not allowed by driver, so provide alternative HW configuration for this case. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 19:53:01 UTC |
| 8ea9ac0 | John W. Linville | 15 September 2011, 19:37:02 UTC | Merge branch 'master' of git://git.infradead.org/users/linville/wireless into for-davem | 15 September 2011, 19:37:02 UTC |
| 17d8428 | Linus Torvalds | 15 September 2011, 19:36:01 UTC | Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Do not allow multiple mounts on same mountpoint when using -o noac NFS: Fix a typo in nfs_flush_multi NFSv4: renewd needs to be able to handle the NFS4ERR_CB_PATH_DOWN error NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation NFSv4: nfs4_proc_renew should be declared static NFSv4: nfs4_proc_async_renew should use a GFP_NOFS allocation | 15 September 2011, 19:36:01 UTC |
| fa75870 | Linus Torvalds | 15 September 2011, 19:34:59 UTC | Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux * 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Initialize tmin hwmon: (pmbus) Fix low limit temperature alarms | 15 September 2011, 19:34:59 UTC |
| 31dda0a | nhorman | 14 September 2011, 03:05:02 UTC | net: don't clear IFF_XMIT_DST_RELEASE in ether_setup d88733150 introduced the IFF_SKB_TX_SHARING flag, which I unilaterally set in ether_setup. In doing this I didn't realize that other flags (such as IFF_XMIT_DST_RELEASE) might be set prior to calling the ether_setup routine. This patch changes ether_setup to or in SKB_TX_SHARING so as not to inadvertently clear other existing flags. Thanks to Pekka Riikonen for pointing out my error Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Pekka Riikonen <priikone@iki.fi> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:44 UTC |
| 48c8301 | Michael S. Tsirkin | 31 August 2011, 08:03:29 UTC | net: copy userspace buffers on device forwarding dev_forward_skb loops an skb back into host networking stack which might hang on the memory indefinitely. In particular, this can happen in macvtap in bridged mode. Copy the userspace fragments to avoid blocking the sender in that case. As this patch makes skb_copy_ubufs extern now, I also added some documentation and made it clear the SKBTX_DEV_ZEROCOPY flag automatically instead of doing it in all callers. This can be made into a separate patch if people feel it's worth it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:44 UTC |
| 0542b69 | dpward | 31 August 2011, 06:05:27 UTC | net: Make flow cache namespace-aware flow_cache_lookup will return a cached object (or null pointer) that the resolver (i.e. xfrm_policy_lookup) previously found for another namespace using the same key/family/dir. Instead, make the namespace part of what identifies entries in the cache. As before, flow_entry_valid will return 0 for entries where the namespace has been deleted, and they will be removed from the cache the next time flow_cache_gc_task is run. Reported-by: Andrew Dickinson <whydna@whydna.net> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:44 UTC |
| 02009af | Kavan Smith | 31 August 2011, 05:12:05 UTC | ipheth: iPhone 4 Verizon CDMA USB Product ID add Add USB product ID for iPhone 4 CDMA Verizon Tested on at least 2 devices Signed-off-by: Kavan Smith <kavansmith82@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:44 UTC |
| d9e64f8 | rajan.aggarwal85@gmail.com | 30 August 2011, 23:57:38 UTC | net/can/af_can.c: Change del_timer to del_timer_sync This is important for SMP platform to check if timer function is executing on other CPU with deleting the timer. Signed-off-by: Rajan Aggarwal <Rajan Aggarwal rajan.aggarwal85@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:43 UTC |
| 6b59e31 | Marcos Paulo de Souza | 30 August 2011, 05:33:57 UTC | Documentation: networking: dmfe.txt: Remove the maintainer of orphan networking driver The dmfe module is a orphan driver, and with this was removed the maintainer of the documentation. Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:43 UTC |
| 946cedc | Eric Dumazet | 30 August 2011, 03:21:44 UTC | tcp: Change possible SYN flooding messages "Possible SYN flooding on port xxxx " messages can fill logs on servers. Change logic to log the message only once per listener, and add two new SNMP counters to track : TCPReqQFullDoCookies : number of times a SYNCOOKIE was replied to client TCPReqQFullDrop : number of times a SYN request was dropped because syncookies were not enabled. Based on a prior patch from Tom Herbert, and suggestions from David. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:43 UTC |
| 27e95a8 | Igor Maravić | 30 August 2011, 03:12:55 UTC | pkt_sched: cls_rsvp.h was outdated File cls_rsvp.h in /net/sched was outdated. I'm sending you patch for this file. [ tb[] array should be indexed by X not X-1 -DaveM ] Signed-off-by: Igor Maravić <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:43 UTC |
| 150966a | Ariel Elior | 30 August 2011, 00:08:46 UTC | bnx2x: Fix for a host coalescing bug which impared latency. Seperated Rx and Tx coalescing to different state machines. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:30 UTC |
| a5c53db | Dmitry Kravkov | 30 August 2011, 00:08:45 UTC | bnx2x: don't access removed registers on 57712 and above Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:30 UTC |
| 0735f2f | Dmitry Kravkov | 30 August 2011, 00:08:44 UTC | bnx2x: init fw_seq after undi_unload is done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:30 UTC |
| 7a06a12 | Dmitry Kravkov | 30 August 2011, 00:08:43 UTC | bnx2x: don't reset device while reading its configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:30 UTC |
| 3395a03 | Dmitry Kravkov | 30 August 2011, 00:08:42 UTC | bnx2x: fix MF for 4-port devices Number of VNs for 4-port devices is 2 instead of 4 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 September 2011, 18:49:29 UTC |
