fd37c2e | Mat Martineau | 28 June 2022, 01:02:43 UTC | selftests: mptcp: Initialize variables to quiet gcc 12 warnings In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable might be used uninitialized. This is a false positive because the only code path that could lead to uninitialized access is where getaddrinfo() fails, but the local xgetaddrinfo() wrapper exits if such a failure occurs. Initialize the 'sock' variable anyway to allow the tools to build with gcc 12. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:43 UTC |
06e445f | Ossama Othman | 28 June 2022, 01:02:42 UTC | mptcp: fix conflict with <netinet/in.h> Including <linux/mptcp.h> before the C library <netinet/in.h> header causes symbol redefinition errors at compile-time due to duplicate declarations and definitions in the <linux/in.h> header included by <linux/mptcp.h>. Explicitly include <netinet/in.h> before <linux/in.h> in <linux/mptcp.h> when __KERNEL__ is not defined so that the C library compatibility logic in <linux/libc-compat.h> is enabled when including <linux/mptcp.h> in user space code. Fixes: c11c5906bc0a ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Signed-off-by: Ossama Othman <ossama.othman@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:43 UTC |
42fb6cd | Paolo Abeni | 28 June 2022, 01:02:41 UTC | selftests: mptcp: more stable diag tests The mentioned test-case still use an hard-coded-len sleep to wait for a relative large number of connection to be established. On very slow VM and with debug build such timeout could be exceeded, causing failures in our CI. Address the issue polling for the expected condition several times, up to an unreasonable high amount of time. On reasonably fast system the self-tests will be faster then before, on very slow one we will still catch the correct condition. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:43 UTC |
6aeed90 | Paolo Abeni | 28 June 2022, 01:02:40 UTC | mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
f745a3e | Paolo Abeni | 28 June 2022, 01:02:39 UTC | mptcp: consistent map handling on failure When the MPTCP receive path reach a non fatal fall-back condition, e.g. when the MPC sockets must fall-back to TCP, the existing code is a little self-inconsistent: it reports that new data is available - return true - but sets the MPC flag to the opposite value. As the consequence read operations in some exceptional scenario may block unexpectedly. Address the issue setting the correct MPC read status. Additionally avoid some code duplication in the fatal fall-back scenario. Fixes: 9c81be0dbc89 ("mptcp: add MP_FAIL response support") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
d51991e | Paolo Abeni | 28 June 2022, 01:02:38 UTC | mptcp: fix shutdown vs fallback race If the MPTCP socket shutdown happens before a fallback to TCP, and all the pending data have been already spooled, we never close the TCP connection. Address the issue explicitly checking for critical condition at fallback time. Fixes: 1e39e5a32ad7 ("mptcp: infinite mapping sending") Fixes: 0348c690ed37 ("mptcp: add the fallback check") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
76a13b3 | Geliang Tang | 28 June 2022, 01:02:37 UTC | mptcp: invoke MP_FAIL response when needed mptcp_mp_fail_no_response shouldn't be invoked on each worker run, it should be invoked only when MP_FAIL response timeout occurs. This patch refactors the MP_FAIL response logic. It leverages the fact that only the MPC/first subflow can gracefully fail to avoid unneeded subflows traversal: the failing subflow can be only msk->first. A new 'fail_tout' field is added to the subflow context to record the MP_FAIL response timeout and use such field to reliably share the timeout timer between the MP_FAIL event and the MPTCP socket close timeout. Finally, a new ack is generated to send out MP_FAIL notification as soon as we hit the relevant condition, instead of waiting a possibly unbound time for the next data packet. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/281 Fixes: d9fb797046c5 ("mptcp: Do not traverse the subflow connection list without lock") Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
31bf11d | Paolo Abeni | 28 June 2022, 01:02:36 UTC | mptcp: introduce MAPPING_BAD_CSUM This allow moving a couple of conditional out of the fast path, making the code more easy to follow and will simplify the next patch. Fixes: ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
0c1f78a | Paolo Abeni | 28 June 2022, 01:02:35 UTC | mptcp: fix error mibs accounting The current accounting for MP_FAIL and FASTCLOSE is not very accurate: both can be increased even when the related option is not really sent. Move the accounting into the correct place. Fixes: eb7f33654dc1 ("mptcp: add the mibs for MP_FAIL") Fixes: 1e75629cb964 ("mptcp: add the mibs for MP_FASTCLOSE") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 29 June 2022, 03:45:42 UTC |
9ab762a | Kai-Heng Feng | 28 June 2022, 12:37:26 UTC | platform/x86: hp-wmi: Ignore Sanitization Mode event After system resume the hp-wmi driver may complain: [ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0 According to HP it means 'Sanitization Mode' and it's harmless to just ignore the event. Cc: Jorge Lopez <jorge.lopez2@hp.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 28 June 2022, 20:20:07 UTC |
bce6243 | Mark Pearson | 27 June 2022, 18:14:49 UTC | platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms PSC platform profile mode is only supported on Linux for AMD platforms. Some older Intel platforms (e.g T490) are advertising it's capability as Windows uses it - but on Linux we should only be using MMC profile for Intel systems. Add a check to prevent it being enabled incorrectly. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 28 June 2022, 20:20:04 UTC |
42504af | Mark Pearson | 03 June 2022, 17:02:09 UTC | platform/x86: thinkpad-acpi: profile capabilities as integer Currently the active mode (PSC/MMC) is stored in an enum and queried throughout the driver. Other driver changes will enumerate additional submodes that are relevant to be tracked, so instead track PSC/MMC in a single integer variable. Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 28 June 2022, 20:20:00 UTC |
aacb455 | Hans de Goede | 24 June 2022, 11:23:39 UTC | platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses On some Panasonic models the volume up/down/mute keypresses get reported both through the Panasonic ACPI HKEY interface as well as through the atkbd device. Filter out the atkbd scan-codes for these to avoid reporting presses twice. Note normally we would leave the filtering of these to userspace by mapping the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb. However in this case that would cause regressions since we were filtering the Panasonic ACPI HKEY events before, so filter these in the kernel. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com | 28 June 2022, 19:54:50 UTC |
1f2c9de | Hans de Goede | 24 June 2022, 11:23:38 UTC | platform/x86: panasonic-laptop: don't report duplicate brightness key-presses The brightness key-presses might also get reported by the ACPI video bus, check for this and in this case don't report the presses to avoid reporting 2 presses for a single key-press. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com | 28 June 2022, 19:54:44 UTC |
83a5ddc | Hans de Goede | 24 June 2022, 11:23:37 UTC | platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug" In hindsight blindly throwing away most of the key-press events is not a good idea. So revert commit ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug"). Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com | 28 June 2022, 19:53:47 UTC |
fe4326c | Hans de Goede | 24 June 2022, 11:23:36 UTC | platform/x86: panasonic-laptop: sort includes alphabetically Sort includes alphabetically, small cleanup patch in preparation of further changes. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com | 28 June 2022, 19:53:39 UTC |
65a3e6c | Stefan Seyfried | 24 June 2022, 11:23:35 UTC | platform/x86: panasonic-laptop: de-obfuscate button codes In the definition of panasonic_keymap[] the key codes are given in decimal, later checks are done with hexadecimal values, which does not help in understanding the code. Additionally use two helper variables to shorten the code and make the logic more obvious. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com | 28 June 2022, 19:53:35 UTC |
3a0cf7a | Hans de Goede | 24 June 2022, 11:23:34 UTC | ACPI: video: Change how we determine if brightness key-presses are handled Some systems have an ACPI video bus but not ACPI video devices with backlight capability. On these devices brightness key-presses are (logically) not reported through the ACPI video bus. Change how acpi_video_handles_brightness_key_presses() determines if brightness key-presses are handled by the ACPI video driver to avoid vendor specific drivers/platform/x86 drivers filtering out their brightness key-presses even though they are the only ones reporting these presses. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com | 28 June 2022, 19:53:30 UTC |
7fe718f | Arnaldo Carvalho de Melo | 09 May 2021, 12:39:02 UTC | tools headers UAPI: Sync linux/kvm.h with the kernel sources To pick the changes in: bfbab44568779e16 ("KVM: arm64: Implement PSCI SYSTEM_SUSPEND") 7b33a09d036ffd9a ("KVM: arm64: Add support for userspace to suspend a vCPU") ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.") 661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND") fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC") 28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version") 536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode") 942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID") 2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests") 35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events") That automatically adds support for this new ioctl: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2022-06-28 12:13:07.281150509 -0300 +++ after 2022-06-28 12:13:16.423392896 -0300 @@ -98,6 +98,7 @@ [0xcc] = "GET_SREGS2", [0xcd] = "SET_SREGS2", [0xce] = "GET_STATS_FD", + [0xd0] = "XEN_HVM_EVTCHN_SEND", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Yrs4RE+qfgTaWdAt@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 28 June 2022, 17:20:22 UTC |
049b1ed | Rafael J. Wysocki | 28 June 2022, 15:56:57 UTC | Merge tag 'cpufreq-arm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM fixes for 5.19-rc5 from Viresh Kumar: - Fix missing of_node_put for qoriq and pmac32 driver (Liang He). - Fix issues around throttle interrupt for qcom driver (Stephen Boyd). - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno). * tag 'cpufreq-arm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c | 28 June 2022, 15:56:57 UTC |
579d6c6 | Ian Rogers | 14 June 2022, 01:47:14 UTC | perf bpf: 8 byte align bpil data bpil data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. With an -fsanitize=undefined build the following errors are observed: $ sudo perf record -a sleep 1 util/bpf-event.c:310:22: runtime error: load of misaligned address 0x55f61084520f for type '__u64', which requires 8 byte alignment 0x55f61084520f: note: pointer points here a8 fe ff ff 3c 51 d3 c0 ff ff ff ff 04 84 d3 c0 ff ff ff ff d8 aa d3 c0 ff ff ff ff a4 c0 d3 c0 ^ util/bpf-event.c:311:20: runtime error: load of misaligned address 0x55f61084522f for type '__u32', which requires 4 byte alignment 0x55f61084522f: note: pointer points here ff ff ff ff c7 17 00 00 f1 02 00 00 1f 04 00 00 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 ^ util/bpf-event.c:198:33: runtime error: member access within misaligned address 0x55f61084523f for type 'const struct bpf_func_info', which requires 4 byte alignment 0x55f61084523f: note: pointer points here 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 3b 00 00 00 ab 02 00 00 44 00 00 00 14 03 00 00 Correct this by rouding up the data sizes and aligning the pointers. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220614014714.1407239-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 28 June 2022, 15:05:25 UTC |
117c495 | Arnaldo Carvalho de Melo | 21 December 2020, 15:53:44 UTC | tools kvm headers arm64: Update KVM headers from the kernel sources To pick the changes from: 2cde51f1e10f2600 ("KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace") b22216e1a617ca55 ("KVM: arm64: Add vendor hypervisor firmware register") 428fd6788d4d0e0d ("KVM: arm64: Add standard hypervisor firmware register") 05714cab7d63b189 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers") 18f3976fdb5da2ba ("KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high") a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") That don't causes any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Raghavendra Rao Ananta <rananta@google.com> Link: https://lore.kernel.org/lkml/YrsWcDQyJC+xsfmm@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 28 June 2022, 14:56:01 UTC |
49c692b | Namhyung Kim | 24 June 2022, 23:13:09 UTC | perf offcpu: Accept allowed sample types only As offcpu-time event is synthesized at the end, it could not get the all the sample info. Define OFFCPU_SAMPLE_TYPES for allowed ones and mask out others in evsel__config() to prevent parse errors. Because perf sample parsing assumes a specific ordering with the sample types, setting unsupported one would make it fail to read data like perf record -d/--data. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220624231313.367909-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 28 June 2022, 14:45:45 UTC |
d6838ec | Namhyung Kim | 24 June 2022, 23:13:08 UTC | perf offcpu: Fix build failure on old kernels Old kernels have a 'struct task_struct' which contains a "state" field and newer kernels have "__state" instead. While the get_task_state() in the BPF code handles that in some way, it assumed the current kernel has the new definition and it caused a build error on old kernels. We should not assume anything and access them carefully. Do not use 'task struct' directly access it instead using new and old definitions in a row. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220624231313.367909-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 28 June 2022, 14:41:26 UTC |
0fe3dbb | Tao Liu | 27 June 2022, 14:00:04 UTC | linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 Fixes: f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)") Link: https://lore.kernel.org/r/20220627140004.3099-1-thomas.liu@ucloud.cn Signed-off-by: Tao Liu <thomas.liu@ucloud.cn> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 28 June 2022, 13:37:25 UTC |
ab84db2 | Eric Dumazet | 27 June 2022, 10:28:13 UTC | net: bonding: fix possible NULL deref in rlb code syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> | 28 June 2022, 13:23:00 UTC |
8698e3b | Amir Goldstein | 27 June 2022, 17:47:19 UTC | fanotify: refine the validation checks on non-dir inode mask Commit ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") added restrictions about setting dirent events in the mask of a non-dir inode mark, which does not make any sense. For backward compatibility, these restictions were added only to new (v5.17+) APIs. It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or FAN_ONDIR in the mask of a non-dir inode. Add these flags to the dir-only restriction of the new APIs as well. Move the check of the dir-only flags for new APIs into the helper fanotify_events_supported(), which is only called for FAN_MARK_ADD, because there is no need to error on an attempt to remove the dir-only flags from non-dir inode. Fixes: ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/ Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> | 28 June 2022, 09:18:13 UTC |
be4b61e | AngeloGioacchino Del Regno | 17 June 2022, 11:09:26 UTC | cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist This SoC shall use the mediatek-cpufreq driver, or the system will crash upon any clock scaling request: add it to the cpufreq-dt-platdev blocklist. Fixes: 39b360102f3a ("cpufreq: mediatek: Add support for MT8186") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> | 28 June 2022, 08:04:56 UTC |
ccd7567 | Liang He | 18 June 2022, 02:25:45 UTC | cpufreq: pmac32-cpufreq: Fix refcount leak bug In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name(). Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> | 28 June 2022, 08:04:51 UTC |
668a7a1 | Stephen Boyd | 16 June 2022, 22:45:31 UTC | cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt Offlining cpu6 and cpu7 and then onlining cpu6 hangs on sc7180-trogdor-lazor because the throttle interrupt doesn't exist. Similarly, things go sideways when suspend/resume runs. That's because the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit() functions are calling genirq APIs with an interrupt value of '-6', i.e. -ENXIO, and that isn't good. Check the value of the throttle interrupt like we already do in other functions in this file and bail out early from lmh code to fix the hang. Reported-by: Rob Clark <robdclark@chromium.org> Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: a1eb080a0447 ("cpufreq: qcom-hw: provide online/offline operations") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> | 28 June 2022, 08:04:51 UTC |
4ff5a9b | Liang He | 15 June 2022, 09:48:07 UTC | drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c In qoriq_cpufreq_probe(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Fixes: 157f527639da ("cpufreq: qoriq: convert to a platform driver") [ Viresh: Fixed Author's name in commit log ] Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> | 28 June 2022, 08:04:45 UTC |
3b0dc52 | Nicolas Dichtel | 23 June 2022, 12:00:15 UTC | ipv6: take care of disable_policy when restoring routes When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up. Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it. CC: stable@kernel.org CC: David Forster <dforster@brocade.com> Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 05:24:30 UTC |
ce95ab7 | Oleksij Rempel | 24 June 2022, 07:51:39 UTC | net: usb: asix: do not force pause frames support We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 05:04:33 UTC |
805206e | Oleksij Rempel | 24 June 2022, 07:51:38 UTC | net: asix: fix "can't send until first packet is send" issue If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 05:04:33 UTC |
6b9f1d4 | Michael Walle | 26 June 2022, 20:00:39 UTC | MAINTAINERS: nfc: drop Charles Gorand from NXP-NCI Mails to Charles get an auto reply, that he is no longer working at Eff'Innov technologies. Drop the entry and mark the driver as orphaned. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220626200039.4062784-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:58:59 UTC |
4bbfed9 | Shreenidhi Shedi | 26 June 2022, 13:29:47 UTC | octeon_ep: use bitwise AND This should be bitwise operator not logical. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com> Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:56:35 UTC |
cce13b8 | Jakub Kicinski | 28 June 2022, 04:51:29 UTC | Merge branch 'notify-user-space-if-any-actions-were-flushed-before-error' Victor Nogueira says: ==================== Notify user space if any actions were flushed before error This patch series fixes the behaviour of actions flush so that the kernel always notifies user space whenever it deletes actions during a flush operation, even if it didn't flush all the actions. This series also introduces tdc tests to verify this new behaviour. ==================== Link: https://lore.kernel.org/r/20220623140742.684043-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:51:30 UTC |
88153e2 | Victor Nogueira | 23 June 2022, 14:07:42 UTC | selftests: tc-testing: Add testcases to test new flush behaviour Add tdc test cases to verify new flush behaviour is correct, which do the following: - Try to flush only one action which is being referenced by a filter - Try to flush three actions where the last one (index 3) is being referenced by a filter Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:51:28 UTC |
76b39b9 | Victor Nogueira | 23 June 2022, 14:07:41 UTC | net/sched: act_api: Notify user space if any actions were flushed before error If during an action flush operation one of the actions is still being referenced, the flush operation is aborted and the kernel returns to user space with an error. However, if the kernel was able to flush, for example, 3 actions and failed on the fourth, the kernel will not notify user space that it deleted 3 actions before failing. This patch fixes that behaviour by notifying user space of how many actions were deleted before flush failed and by setting extack with a message describing what happened. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:51:23 UTC |
8ee9d82 | Tong Zhang | 27 June 2022, 04:33:48 UTC | epic100: fix use after free on rmmod epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:48:51 UTC |
a8fc8cb | Jakub Kicinski | 23 June 2022, 04:21:05 UTC | net: tun: stop NAPI when detaching queues While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped. Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver") Acked-by: Petar Penkov <ppenkov@aviatrix.com> Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 June 2022, 04:48:01 UTC |
fce54ed | John Garry | 23 June 2022, 12:41:59 UTC | scsi: hisi_sas: Limit max hw sectors for v3 HW If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/ Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 28 June 2022, 02:43:57 UTC |
332bd07 | Heinz Mauelshagen | 27 June 2022, 22:37:22 UTC | dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: stable@vger.kernel.org Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> | 27 June 2022, 23:31:47 UTC |
08de214 | Rob Clark | 24 June 2022, 18:45:28 UTC | drm/msm/gem: Fix error return on fence id alloc fail This was a typo, we didn't actually want to return zero. Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491145/ Link: https://lore.kernel.org/r/20220624184528.4036837-1-robdclark@gmail.com | 27 June 2022, 19:48:27 UTC |
96b80fc | Helge Deller | 26 June 2022, 23:39:11 UTC | parisc/unaligned: Fix emulate_ldw() breakage The commit e8aa7b17fe41 broke the 32-bit load-word unalignment exception handler because it calculated the wrong amount of bits by which the value should be shifted. This patch fixes it. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: e8aa7b17fe41 ("parisc/unaligned: Rewrite inline assembly of emulate_ldw()") Cc: stable@vger.kernel.org # v5.18 | 27 June 2022, 19:30:11 UTC |
941e3e7 | Linus Torvalds | 27 June 2022, 17:47:34 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably we are disabling IRQ hardening (again!)" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: make vring_create_virtqueue_split prettier vhost-vdpa: call vhost_vdpa_cleanup during the release virtio_mmio: Restore guest page size on resume virtio_mmio: Add missing PM calls to freeze/restore caif_virtio: fix race between virtio_device_ready() and ndo_open() virtio-net: fix race between ndo_open() and virtio_device_ready() virtio: disable notification hardening by default virtio: Remove unnecessary variable assignments virtio_ring : keep used_wrap_counter in vq->last_used_idx vduse: Tie vduse mgmtdev and its device vdpa/mlx5: Initialize CVQ vringh only once vdpa/mlx5: Update Control VQ callback information | 27 June 2022, 17:47:34 UTC |
2390095 | Masahiro Yamada | 27 June 2022, 03:22:09 UTC | tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. Fixes: ae9e557b5be2 ("time: Export tick start/stop functions for rcutorture") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 June 2022, 17:43:12 UTC |
c257786 | Florian Westphal | 21 June 2022, 16:26:03 UTC | netfilter: br_netfilter: do not skip all hooks with 0 priority When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by: Radim Hrazdil <rhrazdil@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 27 June 2022, 17:23:27 UTC |
e34b9ed | Florian Westphal | 22 June 2022, 14:43:57 UTC | netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 27 June 2022, 17:22:54 UTC |
05907f1 | Pablo Neira Ayuso | 21 June 2022, 12:01:41 UTC | netfilter: nft_dynset: restore set element counter when failing to update This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 27 June 2022, 17:03:37 UTC |
7953849 | Matthew Auld | 22 June 2022, 15:59:19 UTC | drm/i915: tweak the ordering in cpu_write_needs_clflush For imported dma-buf objects we leave the object as cache_coherent = 0 across all platforms, which is reasonable given that have no clue what the memory underneath is, and its not like the driver can ever manually clflush the pages anyway (like with i915_gem_clflush_object) for such objects. However on discrete we choose to treat cache_dirty = true as a programmer error, leading to a warning. The simplest fix looks to be to just change the ordering in cpu_write_needs_clflush to prevent ever setting cache_dirty for dma-buf objects on discrete. Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com (cherry picked from commit 563aaf4a928def2d36d1b3de0a4b515e2477b4da) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 27 June 2022, 15:12:10 UTC |
7d23a80 | Anshuman Gupta | 16 June 2022, 12:22:49 UTC | drm/i915/dgfx: Disable d3cold at gfx root port Currently i915 disables d3cold for i915 pci dev. This blocks D3 for i915 gfx pci upstream bridge (VSP). Let's disable d3cold at gfx root port to make sure that i915 gfx VSP can transition to D3 to save some power. We don't need to disable/enable d3cold in rpm, s2idle suspend/resume handlers. Disabling/Enabling d3cold at gfx root port in probe/remove phase is sufficient. Fixes: 1a085e23411d ("drm/i915: Disable D3Cold in s2idle and runtime pm") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com (cherry picked from commit 138c2fca6f408f397ea8fbbbf33203f244d96e01) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 27 June 2022, 15:12:05 UTC |
9efdd51 | katrinzhou | 21 June 2022, 12:49:26 UTC | drm/i915/gem: add missing else Add missing else in set_proto_ctx_param() to fix coverity issue. Addresses-Coverity: ("Unused value") Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: katrinzhou <katrinzhou@tencent.com> [tursulin: fixup alignment] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621124926.615884-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 7482a65664c16cc88eb84d2b545a1fed887378a1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 27 June 2022, 15:12:03 UTC |
8853e8c | Hans de Goede | 27 June 2022, 13:08:50 UTC | platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[] The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile control. This has been tested successfully with the ideapad-laptop DYTC version 5 code; Add the Ideapad 5 15ITL05 to the ideapad_dytc_v4_allow_table[]. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com | 27 June 2022, 14:20:27 UTC |
a27a1e3 | Hans de Goede | 23 June 2022, 11:59:14 UTC | platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter Add an allow_v4_dytc module parameter to allow users to easily test if DYTC version 4 platform-profiles work on their laptop. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com | 27 June 2022, 14:20:11 UTC |
5f70132 | Maxime Ripard | 22 June 2022, 08:02:43 UTC | drm/vc4: perfmon: Fix variable dereferenced before check Commit 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") introduced a check in vc4_perfmon_get() that dereferences a pointer before we checked whether that pointer is valid or not. Let's rework that function a bit to do things in the proper order. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622080243.22119-1-maxime@cerno.tech | 27 June 2022, 13:43:14 UTC |
c7cc29a | Deming Wang | 22 June 2022, 19:23:06 UTC | virtio_ring: make vring_create_virtqueue_split prettier Add some spaces to vring_alloc_queue(make it look prettier). Signed-off-by: Deming Wang <wangdeming@inspur.com> Message-Id: <20220622192306.4371-1-wangdeming@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 27 June 2022, 12:05:35 UTC |
037d430 | Stefano Garzarella | 22 June 2022, 15:14:07 UTC | vhost-vdpa: call vhost_vdpa_cleanup during the release Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we call vhost_vdpa_iotlb_free() during the release to clean all regions mapped in the iotlb. That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup() to do some cleanup, including deleting all mappings, but we forgot to call it in vhost_vdpa_release(). This causes that if an application does not remove all mappings explicitly (or it crashes), the mappings remain in the iotlb and subsequent applications may fail if they map the same addresses. Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not freeing `v->vdev.vqs` during the release from the same commit. Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its call from vhost_vdpa_release(). Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220622151407.51232-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> | 27 June 2022, 12:05:35 UTC |
e0c2ce8 | Stephan Gerhold | 21 June 2022, 11:06:21 UTC | virtio_mmio: Restore guest page size on resume Virtio devices might lose their state when the VMM is restarted after a suspend to disk (hibernation) cycle. This means that the guest page size register must be restored for the virtio_mmio legacy interface, since otherwise the virtio queues are not functional. This is particularly problematic for QEMU that currently still defaults to using the legacy interface for virtio_mmio. Write the guest page size register again in virtio_mmio_restore() to make legacy virtio_mmio devices work correctly after hibernation. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 27 June 2022, 12:05:35 UTC |
ed7ac37 | Stephan Gerhold | 21 June 2022, 11:06:20 UTC | virtio_mmio: Add missing PM calls to freeze/restore Most virtio drivers provide freeze/restore callbacks to finish up device usage before suspend and to reinitialize the virtio device after resume. However, these callbacks are currently only called when using virtio_pci. virtio_mmio does not have any PM ops defined. This causes problems for example after suspend to disk (hibernation), since the virtio devices might lose their state after the VMM is restarted. Calling virtio_device_freeze()/restore() ensures that the virtio devices are re-initialized correctly. Fix this by implementing the dev_pm_ops for virtio_mmio, similar to virtio_pci_common. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 27 June 2022, 12:05:35 UTC |
11a37eb | Jason Wang | 20 June 2022, 05:11:14 UTC | caif_virtio: fix race between virtio_device_ready() and ndo_open() We currently depend on probe() calling virtio_device_ready() - which happens after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device (e.g. TX) before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 0d2e1a2926b18 ("caif_virtio: Introduce caif over virtio") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220620051115.3142-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 27 June 2022, 12:04:30 UTC |
50c0ada | Jason Wang | 17 June 2022, 07:29:49 UTC | virtio-net: fix race between ndo_open() and virtio_device_ready() We currently call virtio_device_ready() after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 4baf1e33d0842 ("virtio_net: enable VQs early") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220617072949.30734-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 27 June 2022, 12:02:59 UTC |
cb8092d | Xin Long | 24 June 2022, 16:24:31 UTC | tipc: move bc link creation back to tipc_node_create Shuang Li reported a NULL pointer dereference crash: [] BUG: kernel NULL pointer dereference, address: 0000000000000068 [] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc] [] Call Trace: [] <IRQ> [] tipc_bcast_rcv+0xa2/0x190 [tipc] [] tipc_node_bc_rcv+0x8b/0x200 [tipc] [] tipc_rcv+0x3af/0x5b0 [tipc] [] tipc_udp_recv+0xc7/0x1e0 [tipc] It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it creates a node in tipc_node_check_dest(), after inserting the new node into hashtable in tipc_node_create(), it creates the bc link. However, there is a gap between this insert and bc link creation, a bc packet may come in and get the node from the hashtable then try to dereference its bc link, which is NULL. This patch is to fix it by moving the bc link creation before inserting into the hashtable. Note that for a preliminary node becoming "real", the bc link creation should also be called before it's rehashed, as we don't create it for preliminary nodes. Fixes: 4cbf8ac2fe5a ("tipc: enable creating a "preliminary" node") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 June 2022, 10:51:56 UTC |
853a761 | Eric Dumazet | 24 June 2022, 15:30:20 UTC | tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header was not set") caught a bug in skb_tunnel_check_pmtu(), as shown in this syzbot report [1]. In ndo_start_xmit() paths, there is really no need to use skb->mac_header, because skb->data is supposed to point at it. [1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Modules linked in: CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline] RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00 RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212 RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000 RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003 RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> geneve_xmit_skb drivers/net/geneve.c:927 [inline] geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107 __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] __dev_direct_xmit+0x500/0x730 net/core/dev.c:4309 dev_direct_xmit include/linux/netdevice.h:3007 [inline] packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282 packet_snd net/packet/af_packet.c:3073 [inline] packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmsg net/socket.c:2572 [inline] __do_sys_sendmsg net/socket.c:2581 [inline] __se_sys_sendmsg net/socket.c:2579 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3baaa89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109 RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003 RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000 </TASK> Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 June 2022, 10:50:30 UTC |
d2f33f0 | Jean Delvare | 21 June 2022, 13:55:11 UTC | platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource Unlike release_mem_region(), a call to release_resource() does not free the resource, so it has to be freed explicitly to avoid a memory leak. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 455cd867b85b ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 27 June 2022, 07:38:56 UTC |
79e90ca | Dan Carpenter | 15 June 2022, 08:11:07 UTC | platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices() This should return PTR_ERR() instead of IS_ERR(). Also "dev->client" has been set to NULL by this point so it returns 0/success so preserve the error code earlier. Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 27 June 2022, 07:38:56 UTC |
d63eae6 | Gayatri Kammela | 15 June 2022, 00:27:51 UTC | platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver Add Alder Lake N (ADL-N) to the list of the platforms that Intel's PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 27 June 2022, 07:38:31 UTC |
03c765b | Linus Torvalds | 26 June 2022, 21:22:10 UTC | Linux 5.19-rc4 | 26 June 2022, 21:22:10 UTC |
1709b88 | Linus Torvalds | 26 June 2022, 21:12:56 UTC | Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ... | 26 June 2022, 21:12:56 UTC |
413c1f1 | Linus Torvalds | 26 June 2022, 21:00:55 UTC | Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc. Fixes for this merge window: - fix for a damon boot hang, from SeongJae - fix for a kfence warning splat, from Jason Donenfeld - fix for zero-pfn pinning, from Alex Williamson - fix for fallocate hole punch clearing, from Mike Kravetz Fixes for previous releases: - fix for a performance regression, from Marcelo - fix for a hwpoisining BUG from zhenwei pi" * tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Christian Marangi mm/memory-failure: disable unpoison once hw error happens hugetlbfs: zero partial pages during fallocate hole punch mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py mm: re-allow pinning of zero pfns mm/kfence: select random number before taking raw lock MAINTAINERS: add maillist information for LoongArch MAINTAINERS: update MM tree references MAINTAINERS: update Abel Vesa's email MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer MAINTAINERS: add Miaohe Lin as a memory-failure reviewer mailmap: add alias for jarkko@profian.com mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal mm: lru_cache_disable: use synchronize_rcu_expedited mm/page_isolation.c: fix one kernel-doc comment | 26 June 2022, 21:00:55 UTC |
893d1ea | Linus Torvalds | 26 June 2022, 19:12:25 UTC | Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Enable ignore_missing_thread in 'perf stat', enabling counting with '--pid' when threads disappear during counting session setup - Adjust output data offset for backward compatibility in 'perf inject' - Fix missing free in copy_kcore_dir() in 'perf inject' - Fix caching files with a wrong build ID - Sync drm, cpufeatures, vhost and svn headers with the kernel * tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers UAPI: Synch KVM's svm.h header with the kernel tools include UAPI: Sync linux/vhost.h with the kernel sources perf stat: Enable ignore_missing_thread perf inject: Adjust output data offset for backward compatibility perf trace beauty: Fix generation of errno id->str table on ALT Linux perf build-id: Fix caching files with a wrong build ID tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources perf inject: Fix missing free in copy_kcore_dir() | 26 June 2022, 19:12:25 UTC |
82708bb | Linus Torvalds | 26 June 2022, 17:11:36 UTC | Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - zoned relocation fixes: - fix critical section end for extent writeback, this could lead to out of order write - prevent writing to previous data relocation block group if space gets low - reflink fixes: - fix race between reflinking and ordered extent completion - proper error handling when block reserve migration fails - add missing inode iversion/mtime/ctime updates on each iteration when replacing extents - fix deadlock when running fsync/fiemap/commit at the same time - fix false-positive KCSAN report regarding pid tracking for read locks and data race - minor documentation update and link to new site * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Documentation: update btrfs list of features and link to readthedocs.io btrfs: fix deadlock with fsync+fiemap+transaction commit btrfs: don't set lock_owner when locking extent buffer for reading btrfs: zoned: fix critical section of relocation inode writeback btrfs: zoned: prevent allocation from previous data relocation BG btrfs: do not BUG_ON() on failure to migrate space when replacing extents btrfs: add missing inode updates on each iteration when replacing extents btrfs: fix race between reflinking and ordered extent completion | 26 June 2022, 17:11:36 UTC |
c898c67 | Linus Torvalds | 26 June 2022, 17:01:40 UTC | Merge tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - pass the correct size to dma_set_encrypted() when freeing memory (Dexuan Cui) * tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: use the correct size for dma_set_encrypted() | 26 June 2022, 17:01:40 UTC |
be129fa | Linus Torvalds | 26 June 2022, 16:13:51 UTC | Merge tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: "Two bug fixes for the pxa3xx and intelfb drivers: - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write - intelfb: Initialize value of stolen size The other changes are small cleanups, simplifications and documentation updates to the cirrusfb, skeletonfb, omapfb, intelfb, au1100fb and simplefb drivers" * tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Remove duplicate 'the' in comment video: fbdev: omapfb: Align '*' in comment video: fbdev: simplefb: Check before clk_put() not needed video: fbdev: au1100fb: Drop unnecessary NULL ptr check video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write video: fbdev: skeletonfb: Convert to generic power management video: fbdev: cirrusfb: Remove useless reference to PCI power management video: fbdev: intelfb: Initialize value of stolen size video: fbdev: intelfb: Use aperture size from pci_resource_len video: fbdev: skeletonfb: Fix syntax errors in comments | 26 June 2022, 16:13:51 UTC |
c0c6a7b | Linus Torvalds | 26 June 2022, 16:08:30 UTC | Merge tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines - flush all mappings of a shared anonymous page on PA8800/8900 machines via flushing the whole data cache. This may slow down such machines but makes sure that the cache is consistent - Fix duplicate definition build error regarding fb_is_primary_device() * tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable ARCH_HAS_STRICT_MODULE_RWX parisc: Fix flush_anon_page on PA8800/PA8900 parisc: align '*' in comment in math-emu code parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI | 26 June 2022, 16:08:30 UTC |
e963d68 | Linus Torvalds | 26 June 2022, 15:59:21 UTC | Merge tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa Pull xtensa fixes from Max Filippov: - fix OF reference leaks in xtensa arch code - replace '.bss' with '.section .bss' to fix entry.S build with old assembler * tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: change '.bss' to '.section .bss' xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c | 26 June 2022, 15:59:21 UTC |
8100775 | Linus Torvalds | 26 June 2022, 15:53:20 UTC | Merge tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts. - Fix the RTAS call filter to allow a special case that applications rely on. - A change to our execve path, to make the execve syscall exit tracepoint work. - Three fixes to wire up our various RNGs earlier in boot so they're available for use in the initial seeding in random_init(). - A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, and Zi Yan. * tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: wire up rng during setup_arch powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc: Enable execve syscall exit tracepoint powerpc/pseries: wire up rng during setup_arch() powerpc/microwatt: wire up rng during setup_arch() powerpc/mm: Move CMA reservations after initmem_init() | 26 June 2022, 15:53:20 UTC |
393ed5d | Linus Torvalds | 26 June 2022, 15:47:28 UTC | Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit - Update the supported arch list in the LLVM document - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS - Avoid false __KSYM___this_module define in include/generated/autoksyms.h * tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Ignore __this_module in gen_autoksyms.sh kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Documentation/llvm: Update Supported Arch table modpost: fix section mismatch check for exported init/exit sections | 26 June 2022, 15:47:28 UTC |
97d4d02 | Linus Torvalds | 26 June 2022, 15:41:04 UTC | Merge tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fix from Namjae Jeon: - Use updated exfat_chain directly instead of snapshot values in rename. * tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: use updated exfat_chain directly during renaming | 26 June 2022, 15:41:04 UTC |
918c30d | Linus Torvalds | 26 June 2022, 15:34:52 UTC | Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs client fixes from Steve French: "Fixes addressing important multichannel, and reconnect issues. Multichannel mounts when the server network interfaces changed, or ip addresses changed, uncovered problems, especially in reconnect, but the patches for this were held up until recently due to some lock conflicts that are now addressed. Included in this set of fixes: - three fixes relating to multichannel reconnect, dynamically adjusting the list of server interfaces to avoid problems during reconnect - a lock conflict fix related to the above - two important fixes for negotiate on secondary channels (null netname can unintentionally cause multichannel to be disabled to some servers) - a reconnect fix (reporting incorrect IP address in some cases)" * tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs_ses::ip_addr after failover cifs: avoid deadlocks while updating iface cifs: periodically query network interfaces from server cifs: during reconnect, update interface if necessary cifs: change iface_list from array to sorted linked list smb3: use netname when available on secondary channels smb3: fix empty netname context on secondary channels | 26 June 2022, 15:34:52 UTC |
f8d8661 | Arnaldo Carvalho de Melo | 21 December 2020, 23:04:45 UTC | tools headers UAPI: Synch KVM's svm.h header with the kernel To pick up the changes from: d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs") 0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs") dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit") cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support") That gets these new SVM exit reasons: + { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \ + { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \ + { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \ + { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \ + { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \ Addressing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h This causes these changes: CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o LD /tmp/build/perf-urgent/arch/x86/perf-in.o LD /tmp/build/perf-urgent/arch/perf-in.o LD /tmp/build/perf-urgent/perf-in.o LINK /tmp/build/perf-urgent/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
e2213a2 | Arnaldo Carvalho de Melo | 14 April 2020, 12:12:55 UTC | tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID") 2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id") a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces") 3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups") 175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h To pick up these changes and support them: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-06-26 12:04:35.982003781 -0300 +++ after 2022-06-26 12:04:43.819972476 -0300 @@ -28,6 +28,7 @@ [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", [0x77] = "VDPA_SET_CONFIG_CALL", + [0x7C] = "VDPA_SET_GROUP_ASID", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", @@ -39,5 +40,8 @@ [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x7A] = "VDPA_GET_AS_NUM", + [0x7B] = "VDPA_GET_VRING_GROUP", [0x80] = "VDPA_GET_VQS_COUNT", + [0x81] = "VDPA_GET_GROUP_NUM", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gautam Dawar <gautam.dawar@xilinx.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
448ce0e | Gang Li | 22 June 2022, 03:00:37 UTC | perf stat: Enable ignore_missing_thread perf already support ignore_missing_thread for -p, but not yet applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread for `perf stat -p <pid>`. Committer notes: And here is a refresher about the 'ignore_missing_thread' knob, from a previous patch using it: ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option") --- While monitoring a multithread process with pid option, perf sometimes may return sys_perf_event_open failure with 3(No such process) if any of the process's threads die before we open the event. However, we want perf continue monitoring the remaining threads and do not exit with error. --- Signed-off-by: Gang Li <ligang.bdlg@bytedance.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
37ed2cd | Raul Silvera | 21 June 2022, 15:27:25 UTC | perf inject: Adjust output data offset for backward compatibility When 'perf inject' creates a new file, it reuses the data offset from the input file. If there has been a change on the size of the header, as happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in a corrupted output file. This change adds the function perf_session__data_offset to compute the data offset based on the current header size, and uses that instead of the offset from the original input file. Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@intel.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
3713e24 | Arnaldo Carvalho de Melo | 21 June 2022, 15:34:37 UTC | perf trace beauty: Fix generation of errno id->str table on ALT Linux For some reason using: cat <<EoFuncBegin static const char *errno_to_name__$arch(int err) { switch (err) { EoFuncBegin In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT Linux sisyphus (development version), which could be some distro specific glitch, so just get this done in an alternative way that works everywhere while giving notice to the people working on that distro to try and figure our what really took place. Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
ab66fda | Adrian Hunter | 21 June 2022, 12:51:44 UTC | perf build-id: Fix caching files with a wrong build ID Build ID events associate a file name with a build ID. However, when using perf inject, there is no guarantee that the file on the current machine at the current time has that build ID. Fix by comparing the build IDs and skip adding to the cache if they are different. Example: $ echo "int main() {return 0;}" > prog.c $ gcc -o prog prog.c $ perf record --buildid-all ./prog [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data ] $ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; } $ file-buildid prog 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ echo "int main() {return 1;}" > prog.c $ gcc -o prog prog.c $ file-buildid prog 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 Before: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 $ After: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf $ Fixes: 454c407ec17a0c63 ("perf: add perf-inject builtin") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:55 UTC |
4b3f764 | Arnaldo Carvalho de Melo | 01 July 2021, 16:39:15 UTC | tools headers cpufeatures: Sync with the kernel sources To pick the changes from: d6d0c7f681fda1d0 ("x86/cpufeatures: Add PerfMonV2 feature bit") 296d5a17e793956f ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") f30903394eb62316 ("x86/cpufeatures: Add virtual TSC_AUX feature bit") 8ad7e8f696951f19 ("x86/fpu/xsave: Support XSAVEC in the kernel") 59bd54a84d15e933 ("x86/tdx: Detect running as a TDX guest in early boot") a77d41ac3a0f41c8 ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Babu Moger <babu.moger@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:43 UTC |
0fdd435 | Arnaldo Carvalho de Melo | 13 November 2021, 14:08:31 UTC | tools headers UAPI: Sync drm/i915_drm.h with the kernel sources To pick up the changes in: ecf8eca51f33dbfd ("drm/i915/xehp: Add compute engine ABI") 991b4de3275728fd ("drm/i915/uapi: Add kerneldoc for engine class enum") c94fde8f516610b0 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES") 1c671ad753dbbf5f ("drm/i915/doc: Link query items to their uapi structs") a2e5402691e23269 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc") 462ac1cdf4d7acf1 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc") 034d47b25b2ce627 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB") 78e1fb3112c0ac44 ("drm/i915/uapi: Add query for hwconfig blob") That don't add any new ioctl, so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: John Harrison <John.C.Harrison@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:43 UTC |
342cb0d | Adrian Hunter | 20 June 2022, 10:39:04 UTC | perf inject: Fix missing free in copy_kcore_dir() Free string allocated by asprintf(). Fixes: d8fc08550929bb84 ("perf inject: Keep a copy of kcore_dir") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 26 June 2022, 15:32:15 UTC |
0a1355d | Helge Deller | 26 June 2022, 09:50:43 UTC | parisc: Enable ARCH_HAS_STRICT_MODULE_RWX Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes patch_map() to return an alias mapping to the to-be-patched code in order to prevent writing to write-protected memory. Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/ | 26 June 2022, 10:23:15 UTC |
e9ed22e | John David Anglin | 18 June 2022, 15:14:34 UTC | parisc: Fix flush_anon_page on PA8800/PA8900 Anonymous pages are allocated with the shared mappings colouring, SHM_COLOUR. Since the alias boundary on machines with PA8800 and PA8900 processors is unknown, flush_user_cache_page() might not flush all mappings of a shared anonymous page. Flushing the whole data cache flushes all mappings. This won't fix all coherency issues with shared mappings but it seems to work well in practice. I haven't seen any random memory faults in almost a month on a rp3440 running as a debian buildd machine. There is a small preformance hit. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.18+ | 26 June 2022, 10:23:15 UTC |
067baa9 | Jason A. Donenfeld | 25 June 2022, 11:01:08 UTC | ksmbd: use vfs_llseek instead of dereferencing NULL By not checking whether llseek is NULL, this might jump to NULL. Also, it doesn't check FMODE_LSEEK. Fix this by using vfs_llseek(), which always does the right thing. Fixes: f44158485826 ("cifsd: add file operations") Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Hyunchul Lee <hyc.lee@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 26 June 2022, 00:52:49 UTC |
d16c5c7 | Jiang Jian | 21 June 2022, 06:38:23 UTC | parisc: align '*' in comment in math-emu code Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Helge Deller <deller@gmx.de> | 25 June 2022, 22:19:27 UTC |
ff13976 | Sami Tolvanen | 16 June 2022, 19:57:59 UTC | kbuild: Ignore __this_module in gen_autoksyms.sh Module object files can contain an undefined reference to __this_module, which isn't resolved until we link the final .ko. The kernel doesn't export this symbol, so ignore it in gen_autoksyms.sh. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Steve Muckle <smuckle@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Ramji Jiyani <ramjiyani@google.com> | 25 June 2022, 21:15:05 UTC |
53632ba | Masahiro Yamada | 23 June 2022, 19:11:47 UTC | kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. Commit 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix the issue at all. Now I realized I had applied a wrong patch. In v1 patch [1], the autoksyms_recursive target correctly recurses to "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive". In v2 patch [2], I accidentally dropped the diff line, and it recurses to "$(MAKE) -f $(srctree)/Makefile vmlinux". Restore the code I intended in v1. [1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/ [2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/ Fixes: 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> | 25 June 2022, 21:15:05 UTC |
0840a79 | Linus Torvalds | 25 June 2022, 17:07:36 UTC | Merge tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull IIO driver fixes from Greg KH: "Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best in his pull request to me, so I'll just quote it here below, as that's the only changes we have right now for the char-misc driver tree: testing: - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. Various drivers: - Fix ordering of iio_get_trigger() being called before iio_trigger_register() adi,admv1014: - Fix dubious x & !y warning. adi,axi-adc: - Fix missing of_node_put() in error and normal paths. aspeed,adc: - Add missing of_node_put() fsl,mma8452: - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). fsl,vf610: - Fix documentation of in_conversion_mode ABI. iio-trig-sysfs: - Ensure irq work has finished before freeing the trigger. invensense,mpu3050: - Disable regulators in error path. invensense,icm42600: - Fix collision of enum value of 0 with error path where 0 is no match. renesas,rzg2l_Adc: - Add missing fwnode_handle_put() in error path. rescale: - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. semtech,sx9324: - Check return value of read of pin_defs st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x ti,ads131e08: - Add missing fwnode_handle_put() in error paths. xilinx,ams: - Fix variable checked for error from platform_get_irq() x-powers,axp288: - Overide TS_PIN bias current for boards where it is not correctly initialized. yamaha,yas530: - Fix inverted check on calibration data being all zeros. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ... | 25 June 2022, 17:07:36 UTC |
c24eb8d | Linus Torvalds | 25 June 2022, 17:02:05 UTC | Merge tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes and new device ids for 5.19-rc4 for a few small reported issues. They include: - new usb-serial driver ids - MAINTAINERS file update to properly catch the USB dts files - dt-bindings fixes for reported build warnings - xhci driver fixes for reported problems - typec Kconfig dependancy fix - raw_gadget fuzzing fixes found by syzbot - chipidea driver bugfix - usb gadget uvc bugfix All of these have been in linux-next with no reported issues" * tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: check request status before setting device address USB: gadget: Fix double-free bug in raw_gadget driver xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI xhci: turn off port power in shutdown xhci: Keep interrupt disabled in initialization until host is running. USB: serial: option: add Quectel RM500K module support USB: serial: option: add Quectel EM05-G modem USB: serial: pl2303: add support for more HXN (G) types usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC usb: gadget: uvc: fix list double add in uvcg_video_pump dt-bindings: usb: ehci: Increase the number of PHYs dt-bindings: usb: ohci: Increase the number of PHYs usb: gadget: Fix non-unique driver names in raw-gadget driver MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM USB: serial: option: add Telit LE910Cx 0x1250 composition | 25 June 2022, 17:02:05 UTC |
fbb564a | wuchi | 05 June 2022, 14:58:35 UTC | lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch() 1. Getting next index before continue branch. 2. Checking free bits when setting the target bits. Otherwise, it may reuse the busying bits. Signed-off-by: wuchi <wuchi.zero@gmail.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Link: https://lore.kernel.org/r/20220605145835.26916-1-wuchi.zero@gmail.com Fixes: 9672b0d43782 ("sbitmap: add __sbitmap_queue_get_batch()") Signed-off-by: Jens Axboe <axboe@kernel.dk> | 25 June 2022, 16:58:55 UTC |
cb84318 | Linus Torvalds | 25 June 2022, 16:24:59 UTC | Merge tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some bug fixes and a trivial cleanup" * tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Make compute_return_era() return void LoongArch: Fix wrong fpu version LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler() LoongArch: Fix sleeping in atomic context in setup_tlb_handler() LoongArch: Fix the _stext symbol address LoongArch: Fix the !THP build | 25 June 2022, 16:24:59 UTC |
29eeafc | Linus Torvalds | 25 June 2022, 16:19:51 UTC | Merge tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "Some urgent fixes to avoid generating corrupted inodes caused by compressed and inline_data files. In addition, avoid a wrong error report which prevents a roll-forward recovery" * tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: do not count ENOENT for error case f2fs: fix iostat related lock protection f2fs: attach inline_data after setting compression | 25 June 2022, 16:19:51 UTC |