Revision 36a5fdf76d3281345e000e115f33817570a76420 authored by Dave Airlie on 03 November 2017, 19:43:44 UTC, committed by Dave Airlie on 03 November 2017, 19:43:44 UTC
This time really the last i915 batch for v4.15: - PSR state tracking in crtc state (Ville) - Fix eviction when the GGTT is idle but full (Chris) - BDW DP aux channel timeout fix (James) - LSPCON detection fixes (Shashank) - Use for_each_pipe to iterate over pipes (Mika Kahola) - Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha) - Refactoring and preparation for DDI encoder type cleanup (Ville) - Broadwell DDI FDI buf translation fix (Chris) - Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan) - GuC/HuC firmware loader refactoring (Michal) - Make shrinking more effective and not stall so much (Chris) - Cannonlake PLL fixes (Rodrigo) - DP MST connector error propagation fixes (James) - Convert timers to use timer_setup (Kees Cook) - Skylake plane enable/disable unification (Juha-Pekka) - Fix to actually free driver internal objects when requested (Chris) - DDI buf trans refactoring (Ville) - Skip waking the device to service pwrite (Chris) - Improve DSI VBT backlight parsing abstraction (Madhav) - Cannonlake VBT DDC pin mapping fix (Rodrigo) * tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits) drm/i915: Update DRIVER_DATE to 20171023 drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin. drm/i915: Let's use more enum intel_dpll_id pll_id. drm/i915: Use existing DSI backlight ports info drm/i915: Parse DSI backlight/cabc ports. drm/i915: Skip waking the device to service pwrite drm/i915/crt: split compute_config hook by platforms drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables drm/i915: Unify error handling for missing DDI buf trans tables drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling drm/i915: Kill off the BXT buf_trans default_index drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly drm/i915: Integrate BXT into intel_ddi_dp_voltage_max() drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers() drm/i915: Pass the encoder type explicitly to skl_set_iboost() drm/i915: Extract intel_ddi_get_buf_trans_hdmi() drm/i915: Relocate intel_ddi_get_buf_trans_*() functions drm/i915: Flush the idle-worker for debugfs/i915_drop_caches drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y ...
File | Mode | Size |
---|---|---|
bitops | ||
4level-fixup.h | -rw-r--r-- | 1.0 KB |
5level-fixup.h | -rw-r--r-- | 1.1 KB |
asm-offsets.h | -rw-r--r-- | 35 bytes |
asm-prototypes.h | -rw-r--r-- | 468 bytes |
atomic-long.h | -rw-r--r-- | 6.8 KB |
atomic.h | -rw-r--r-- | 5.1 KB |
atomic64.h | -rw-r--r-- | 2.3 KB |
audit_change_attr.h | -rw-r--r-- | 445 bytes |
audit_dir_write.h | -rw-r--r-- | 416 bytes |
audit_read.h | -rw-r--r-- | 202 bytes |
audit_signal.h | -rw-r--r-- | 36 bytes |
audit_write.h | -rw-r--r-- | 377 bytes |
barrier.h | -rw-r--r-- | 5.6 KB |
bitops.h | -rw-r--r-- | 1.1 KB |
bitsperlong.h | -rw-r--r-- | 553 bytes |
bug.h | -rw-r--r-- | 6.4 KB |
bugs.h | -rw-r--r-- | 228 bytes |
cache.h | -rw-r--r-- | 345 bytes |
cacheflush.h | -rw-r--r-- | 1.3 KB |
checksum.h | -rw-r--r-- | 2.2 KB |
clkdev.h | -rw-r--r-- | 706 bytes |
cmpxchg-local.h | -rw-r--r-- | 1.4 KB |
cmpxchg.h | -rw-r--r-- | 2.2 KB |
current.h | -rw-r--r-- | 217 bytes |
delay.h | -rw-r--r-- | 1.1 KB |
device.h | -rw-r--r-- | 245 bytes |
div64.h | -rw-r--r-- | 6.9 KB |
dma-contiguous.h | -rw-r--r-- | 199 bytes |
dma.h | -rw-r--r-- | 514 bytes |
early_ioremap.h | -rw-r--r-- | 1.6 KB |
emergency-restart.h | -rw-r--r-- | 209 bytes |
exec.h | -rw-r--r-- | 697 bytes |
export.h | -rw-r--r-- | 2.2 KB |
extable.h | -rw-r--r-- | 763 bytes |
fb.h | -rw-r--r-- | 232 bytes |
fixmap.h | -rw-r--r-- | 2.8 KB |
ftrace.h | -rw-r--r-- | 460 bytes |
futex.h | -rw-r--r-- | 2.5 KB |
getorder.h | -rw-r--r-- | 1.4 KB |
gpio.h | -rw-r--r-- | 4.4 KB |
hardirq.h | -rw-r--r-- | 493 bytes |
hugetlb.h | -rw-r--r-- | 806 bytes |
hw_irq.h | -rw-r--r-- | 270 bytes |
ide_iops.h | -rw-r--r-- | 752 bytes |
int-ll64.h | -rw-r--r-- | 893 bytes |
io.h | -rw-r--r-- | 20.3 KB |
ioctl.h | -rw-r--r-- | 467 bytes |
iomap.h | -rw-r--r-- | 3.1 KB |
irq.h | -rw-r--r-- | 364 bytes |
irq_regs.h | -rw-r--r-- | 980 bytes |
irq_work.h | -rw-r--r-- | 155 bytes |
irqflags.h | -rw-r--r-- | 1.5 KB |
kdebug.h | -rw-r--r-- | 143 bytes |
kmap_types.h | -rw-r--r-- | 159 bytes |
kprobes.h | -rw-r--r-- | 829 bytes |
kvm_para.h | -rw-r--r-- | 441 bytes |
linkage.h | -rw-r--r-- | 225 bytes |
local.h | -rw-r--r-- | 2.2 KB |
local64.h | -rw-r--r-- | 3.8 KB |
mcs_spinlock.h | -rw-r--r-- | 260 bytes |
memory_model.h | -rw-r--r-- | 2.1 KB |
mm-arch-hooks.h | -rw-r--r-- | 388 bytes |
mm_hooks.h | -rw-r--r-- | 837 bytes |
mmu.h | -rw-r--r-- | 410 bytes |
mmu_context.h | -rw-r--r-- | 842 bytes |
module.h | -rw-r--r-- | 1.1 KB |
msi.h | -rw-r--r-- | 799 bytes |
page.h | -rw-r--r-- | 2.4 KB |
param.h | -rw-r--r-- | 328 bytes |
parport.h | -rw-r--r-- | 565 bytes |
pci.h | -rw-r--r-- | 542 bytes |
pci_iomap.h | -rw-r--r-- | 2.0 KB |
percpu.h | -rw-r--r-- | 12.7 KB |
pgalloc.h | -rw-r--r-- | 303 bytes |
pgtable-nop4d-hack.h | -rw-r--r-- | 1.8 KB |
pgtable-nop4d.h | -rw-r--r-- | 1.6 KB |
pgtable-nopmd.h | -rw-r--r-- | 1.9 KB |
pgtable-nopud.h | -rw-r--r-- | 1.9 KB |
pgtable.h | -rw-r--r-- | 27.6 KB |
preempt.h | -rw-r--r-- | 1.9 KB |
ptrace.h | -rw-r--r-- | 1.6 KB |
qrwlock.h | -rw-r--r-- | 5.0 KB |
qrwlock_types.h | -rw-r--r-- | 431 bytes |
qspinlock.h | -rw-r--r-- | 3.7 KB |
qspinlock_types.h | -rw-r--r-- | 2.3 KB |
resource.h | -rw-r--r-- | 1.0 KB |
rwsem.h | -rw-r--r-- | 3.0 KB |
seccomp.h | -rw-r--r-- | 1.3 KB |
sections.h | -rw-r--r-- | 4.7 KB |
segment.h | -rw-r--r-- | 249 bytes |
serial.h | -rw-r--r-- | 306 bytes |
set_memory.h | -rw-r--r-- | 323 bytes |
signal.h | -rw-r--r-- | 269 bytes |
simd.h | -rw-r--r-- | 397 bytes |
sizes.h | -rw-r--r-- | 78 bytes |
spinlock.h | -rw-r--r-- | 290 bytes |
statfs.h | -rw-r--r-- | 130 bytes |
string.h | -rw-r--r-- | 281 bytes |
switch_to.h | -rw-r--r-- | 992 bytes |
syscall.h | -rw-r--r-- | 6.2 KB |
syscalls.h | -rw-r--r-- | 700 bytes |
termios-base.h | -rw-r--r-- | 2.1 KB |
termios.h | -rw-r--r-- | 2.8 KB |
timex.h | -rw-r--r-- | 469 bytes |
tlb.h | -rw-r--r-- | 9.1 KB |
tlbflush.h | -rw-r--r-- | 446 bytes |
topology.h | -rw-r--r-- | 2.2 KB |
trace_clock.h | -rw-r--r-- | 352 bytes |
uaccess.h | -rw-r--r-- | 5.2 KB |
unaligned.h | -rw-r--r-- | 1.0 KB |
unistd.h | -rw-r--r-- | 279 bytes |
user.h | -rw-r--r-- | 242 bytes |
vga.h | -rw-r--r-- | 548 bytes |
vmlinux.lds.h | -rw-r--r-- | 28.0 KB |
vtime.h | -rw-r--r-- | 52 bytes |
word-at-a-time.h | -rw-r--r-- | 2.7 KB |
xor.h | -rw-r--r-- | 13.6 KB |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...