| 3770a42 | Sagi Grimberg | 05 September 2022, 15:07:06 UTC | nvme-tcp: fix regression that causes sporadic requests to time out When we queue requests, we strive to batch as much as possible and also signal the network stack that more data is about to be sent over a socket with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued as well as queue->more_requests that is derived from the block layer last-in-batch indication. We set more_request=true when we flush the request directly from .queue_rq submission context (in nvme_tcp_send_all), however this is wrongly assuming that no other requests may be queued during the execution of nvme_tcp_send_all. Due to this, a race condition may happen where: 1. request X is queued as !last-in-batch 2. request X submission context calls nvme_tcp_send_all directly 3. nvme_tcp_send_all is preempted and schedules to a different cpu 4. request Y is queued as last-in-batch 5. nvme_tcp_send_all context sends request X+Y, however signals for both MSG_SENDPAGE_NOTLAST because queue->more_requests=true. ==> none of the requests is pushed down to the wire as the network stack is waiting for more data, both requests timeout. To fix this, we eliminate queue->more_requests and only rely on the queue req_list and send_list to be not-empty. Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 06 September 2022, 04:40:44 UTC |
| 160f354 | Sagi Grimberg | 05 September 2022, 10:54:17 UTC | nvme-tcp: fix UAF when detecting digest errors We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> | 06 September 2022, 04:40:40 UTC |
| 6a02a61 | Bart Van Assche | 12 August 2022, 21:03:17 UTC | nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> | 05 September 2022, 13:03:51 UTC |
| 748008e | Ming Lei | 23 August 2022, 10:38:19 UTC | block: don't add partitions if GD_SUPPRESS_PART_SCAN is set Commit b9684a71fca7 ("block, loop: support partitions without scanning") adds GD_SUPPRESS_PART_SCAN for replacing part function of GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since loop doesn't want to add partitions if GENHD_FL_NO_PART was set. And it causes regression on libblockdev (as called from udisks) which operates with the LO_FLAGS_PARTSCAN. Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is set. Fixes: b9684a71fca7 ("block, loop: support partitions without scanning") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 September 2022, 17:29:03 UTC |
| 7a3d222 | Ming Lei | 02 September 2022, 15:23:02 UTC | Documentation: document ublk Add documentation for ublk subsystem. It was supposed to be documented when merging the driver, but missing at that time. Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> [axboe: correct MAINTAINERS addition] Signed-off-by: Jens Axboe <axboe@kernel.dk> | 02 September 2022, 15:31:15 UTC |
| 2565779 | Jens Axboe | 01 September 2022, 14:11:11 UTC | Merge tag 'nvme-6.0-2022-09-01' of git://git.infradead.org/nvme into block-6.0 Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.0 - error handling fix for the new auth code (Hannes Reinecke) - fix unhandled tcp states in nvmet_tcp_state_change (Maurizio Lombardi) - add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)" * tag 'nvme-6.0-2022-09-01' of git://git.infradead.org/nvme: nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change() nvmet-auth: add missing goto in nvmet_setup_auth() nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610 | 01 September 2022, 14:11:11 UTC |
| 478814a | Maurizio Lombardi | 29 August 2022, 12:40:30 UTC | nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change() TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing so we can ignore them and avoid printing the "unhandled state" warning message. [ 1298.852386] nvmet_tcp: queue 2 unhandled state 5 [ 1298.879112] nvmet_tcp: queue 7 unhandled state 5 [ 1298.884253] nvmet_tcp: queue 8 unhandled state 5 [ 1298.889475] nvmet_tcp: queue 9 unhandled state 5 v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore the fin_wait2 and last_ack states. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 31 August 2022, 04:58:10 UTC |
| da0342a | Hannes Reinecke | 24 August 2022, 07:23:16 UTC | nvmet-auth: add missing goto in nvmet_setup_auth() There's a goto missing in nvmet_setup_auth(), causing a kernel oops when nvme_auth_extract_key() fails. Reported-by: Tal Lossos <tallossos@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 31 August 2022, 04:57:59 UTC |
| 200dccd | Shyamin Ayesh | 26 August 2022, 16:51:40 UTC | nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610 Lexar NM610 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Shyamin Ayesh <me@shyamin.com> [patch formatting] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> | 31 August 2022, 04:57:28 UTC |
| 645b5ed | Jens Axboe | 24 August 2022, 19:58:37 UTC | Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.0 Pull MD fixes from Song: "1. Fix for clustered raid, by Guoqing Jiang. 2. req_op fix, by Bart Van Assche. 3. Fix race condition in raid recreate, by David Sloan." * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: call __md_stop_writes in md_stop Revert "md-raid: destroy the bitmap after destroying the thread" md: Flush workqueue md_rdev_misc_wq in md_alloc() md/raid10: Fix the data type of an r10_sync_page_io() argument | 24 August 2022, 19:58:37 UTC |
| 0dd84b3 | Guoqing Jiang | 17 August 2022, 12:05:14 UTC | md: call __md_stop_writes in md_stop From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> | 24 August 2022, 18:19:59 UTC |
| 1d25875 | Guoqing Jiang | 17 August 2022, 12:05:13 UTC | Revert "md-raid: destroy the bitmap after destroying the thread" This reverts commit e151db8ecfb019b7da31d076130a794574c89f6f. Because it obviously breaks clustered raid as noticed by Neil though it fixed KASAN issue for dm-raid, let's revert it and fix KASAN issue in next commit. [1]. https://lore.kernel.org/linux-raid/a6657e08-b6a7-358b-2d2a-0ac37d49d23a@linux.dev/T/#m95ac225cab7409f66c295772483d091084a6d470 Fixes: e151db8ecfb0 ("md-raid: destroy the bitmap after destroying the thread") Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> | 24 August 2022, 18:19:23 UTC |
| 5e8daf9 | David Sloan | 11 August 2022, 17:14:13 UTC | md: Flush workqueue md_rdev_misc_wq in md_alloc() A race condition still exists when removing and re-creating md devices in test cases. However, it is only seen on some setups. The race condition was tracked down to a reference still being held to the kobject by the rdev in the md_rdev_misc_wq which will be released in rdev_delayed_delete(). md_alloc() waits for previous deletions by waiting on the md_misc_wq, but the md_rdev_misc_wq may still be holding a reference to a recently removed device. To fix this, also flush the md_rdev_misc_wq in md_alloc(). Signed-off-by: David Sloan <david.sloan@eideticom.com> [logang@deltatee.com: rewrote commit message] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> | 24 August 2022, 17:26:35 UTC |
| 265ad47 | Bart Van Assche | 10 August 2022, 18:20:12 UTC | md/raid10: Fix the data type of an r10_sync_page_io() argument Fix the following sparse warning: drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@ This patch does not change any functionality since REQ_OP_READ = READ = 0 and since REQ_OP_WRITE = WRITE = 1. Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org> | 24 August 2022, 17:26:35 UTC |
| c490a0b | Siddh Raman Pant | 23 August 2022, 16:08:10 UTC | loop: Check for overflow while configuring loop The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e Reported-and-tested-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me Signed-off-by: Jens Axboe <axboe@kernel.dk> | 24 August 2022, 12:52:52 UTC |
| 65fac0d | Yu Kuai | 26 July 2022, 12:22:24 UTC | blk-mq: fix io hung due to missing commit_rqs Currently, in virtio_scsi, if 'bd->last' is not set to true while dispatching request, such io will stay in driver's queue, and driver will wait for block layer to dispatch more rqs. However, if block layer failed to dispatch more rq, it should trigger commit_rqs to inform driver. There is a problem in blk_mq_try_issue_list_directly() that commit_rqs won't be called: // assume that queue_depth is set to 1, list contains two rq blk_mq_try_issue_list_directly blk_mq_request_issue_directly // dispatch first rq // last is false __blk_mq_try_issue_directly blk_mq_get_dispatch_budget // succeed to get first budget __blk_mq_issue_directly scsi_queue_rq cmd->flags |= SCMD_LAST virtscsi_queuecommand kick = (sc->flags & SCMD_LAST) != 0 // kick is false, first rq won't issue to disk queued++ blk_mq_request_issue_directly // dispatch second rq __blk_mq_try_issue_directly blk_mq_get_dispatch_budget // failed to get second budget ret == BLK_STS_RESOURCE blk_mq_request_bypass_insert // errors is still 0 if (!list_empty(list) || errors && ...) // won't pass, commit_rqs won't be called In this situation, first rq relied on second rq to dispatch, while second rq relied on first rq to complete, thus they will both hung. Fix the problem by also treat 'BLK_STS_*RESOURCE' as 'errors' since it means that request is not queued successfully. Same problem exists in blk_mq_dispatch_rq_list(), 'BLK_STS_*RESOURCE' can't be treated as 'errors' here, fix the problem by calling commit_rqs if queue_rq return 'BLK_STS_*RESOURCE'. Fixes: d666ba98f849 ("blk-mq: add mq_ops->commit_rqs()") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220726122224.1790882-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 19 August 2022, 20:45:58 UTC |
| d3b3859 | Yufen Yu | 03 August 2022, 02:33:55 UTC | blk-mq: run queue no matter whether the request is the last request We do test on a virtio scsi device (/dev/sda) and the default mq scheduler is 'none'. We found a IO hung as following: blk_finish_plug blk_mq_plug_issue_direct scsi_mq_get_budget //get budget_token fail and sdev->restarts=1 scsi_end_request scsi_run_queue_async //sdev->restart=0 and run queue blk_mq_request_bypass_insert //add request to hctx->dispatch list //continue to dispath plug list blk_mq_dispatch_plug_list blk_mq_try_issue_list_directly //success issue all requests from plug list After .get_budget fail, scsi_mq_get_budget will increase 'restarts'. Normally, it will run hw queue when io complete and set 'restarts' as 0. But if we run queue before adding request to the dispatch list and blk_mq_dispatch_plug_list also success issue all requests, then on one will run queue, and the request will be stall in the dispatch list and cannot complete forever. It is wrong to use last request of plug list to decide if run queue is needed since all the remained requests in plug list may be from other hctxs. To fix the bug, pass run_queue as true always to blk_mq_request_bypass_insert(). Fix-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Fixes: dc5fc361d891 ("block: attempt direct issue of plug list") Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 18 August 2022, 13:39:01 UTC |
| a8239f0 | Yu Kuai | 18 August 2022, 06:35:55 UTC | blk-mq: remove unused function blk_mq_queue_stopped() blk_mq_queue_stopped() doesn't have any caller, which was found by code coverage test, thus remove it. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20220818063555.3741222-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 18 August 2022, 13:38:10 UTC |
| e6190dd | ZiyangZhang | 15 August 2022, 02:36:33 UTC | ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work In ublk_queue_rq(), Assume current request is a re-issued request aborted previously in monitor_work because the ubq_daemon(ioucmd's task) is PF_EXITING. For this request, we cannot call io_uring_cmd_complete_in_task() anymore because at that moment io_uring context may be freed in case that no inflight ioucmd exists. Otherwise, we may cause null-deref in ctx->fallback_work. Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This check is safe and makes sense. Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request (releasing the tag). Then the request is restarted(allocating the tag) and we are here. Since releasing/allocating a tag implies smp_mb(), finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request aborted previously. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220815023633.259825-4-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 August 2022, 12:16:19 UTC |
| bb24174 | ZiyangZhang | 15 August 2022, 02:36:32 UTC | ublk_drv: update comment for __ublk_fail_req() Since __ublk_rq_task_work always fails requests immediately during exiting, __ublk_fail_req() is only called from abort context during exiting. So lock is unnecessary. Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220815023633.259825-3-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 August 2022, 12:16:19 UTC |
| 966120b | ZiyangZhang | 15 August 2022, 02:36:31 UTC | ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work() Replace direct check on PF_EXITING in __ublk_rq_task_work() by the existing wrapper. Also inline ubq_daemon_is_dying(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20220815023633.259825-2-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 16 August 2022, 12:16:19 UTC |
| 92cb6e2 | ZiyangZhang | 10 August 2022, 05:52:12 UTC | ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA If ublksrv sends UBLK_IO_NEED_GET_DATA with new allocated io buffer, we have to update iod->addr in task_work before calling io_uring_cmd_done(). Then usersapce target can handle (write)io request with the new io buffer reading from updated iod. Without this change, userspace target may touch a wrong io buffer! Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220810055212.66417-1-ZiyangZhang@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 August 2022, 14:35:28 UTC |
| aa0c680 | Rafael Mendonca | 11 August 2022, 23:23:37 UTC | block: Do not call blk_put_queue() if gendisk allocation fails Commit 6f8191fdf41d ("block: simplify disk shutdown") removed the call to blk_get_queue() during gendisk allocation but missed to remove the corresponding cleanup code blk_put_queue() for it. Thus, if the gendisk allocation fails, the request_queue refcount gets decremented and reaches 0, causing blk_mq_release() to be called with a hctx still alive. That triggers a WARNING report, as found by syzkaller: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 23016 at block/blk-mq.c:3881 blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881 [...] stripped RIP: 0010:blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881 [...] stripped Call Trace: <TASK> blk_release_queue+0x153/0x270 block/blk-sysfs.c:780 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 __alloc_disk_node+0x4f7/0x610 block/genhd.c:1388 __blk_mq_alloc_disk+0x13b/0x1f0 block/blk-mq.c:3961 loop_add+0x3e2/0xaf0 drivers/block/loop.c:1978 loop_control_ioctl+0x133/0x620 drivers/block/loop.c:2150 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] stripped Fixes: 6f8191fdf41d ("block: simplify disk shutdown") Reported-by: syzbot+31c9594f6e43b9289b25@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220811232338.254673-1-rafaelmendsr@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 12 August 2022, 12:42:06 UTC |
| cd83cd5 | Jens Axboe | 11 August 2022, 14:37:48 UTC | Merge tag 'nvme-6.0-2022-08-11' of git://git.infradead.org/nvme into block-6.0 Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.0 - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu)" * tag 'nvme-6.0-2022-08-11' of git://git.infradead.org/nvme: nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue | 11 August 2022, 14:37:48 UTC |
| f37527a | Dennis P. Kliem | 11 August 2022, 10:56:57 UTC | nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 ADATA XPG GAMMIX S70 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Dennis P. Kliem <dpkliem@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 11 August 2022, 12:10:16 UTC |
| 2bff487 | Maurizio Lombardi | 01 August 2022, 08:09:00 UTC | nvme-tcp: check if the queue is allocated before stopping it When an error is detected and the host reconnects, the nvme_tcp_error_recovery_work() function is called and starts tearing down the io queues and de-allocating them; If at the same time the "nvme" process deletes the controller via sysfs, the nvme_tcp_delete_ctrl() gets called and waits until the nvme_tcp_error_recovery_work() finishes its job; then starts tearing down the io queues, but at this point they have already been freed and the mutexes are destroyed. Calling mutex_lock() against a destroyed mutex triggers a warning: [ 1299.025575] nvme nvme1: Reconnecting in 10 seconds... [ 1299.636449] nvme nvme1: Removing ctrl: NQN "blktests-subsystem-1" [ 1299.645262] ------------[ cut here ]------------ [ 1299.649949] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 1299.649971] WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579 __mutex_lock+0x2d0/0x7dc [ 1299.717934] CPU: 4 PID: 104150 Comm: nvme [ 1299.828075] Call trace: [ 1299.830526] __mutex_lock+0x2d0/0x7dc [ 1299.834203] mutex_lock_nested+0x64/0xd4 [ 1299.838139] nvme_tcp_stop_queue+0x54/0xe0 [nvme_tcp] [ 1299.843211] nvme_tcp_teardown_io_queues.part.0+0x90/0x280 [nvme_tcp] [ 1299.849672] nvme_tcp_delete_ctrl+0x6c/0xf0 [nvme_tcp] [ 1299.854831] nvme_do_delete_ctrl+0x108/0x120 [nvme_core] [ 1299.860181] nvme_sysfs_delete+0xec/0xf0 [nvme_core] [ 1299.865179] dev_attr_store+0x40/0x70 Fix the warning by checking if the queues are allocated in the nvme_tcp_stop_queue(). If they are not, it makes no sense to try to stop them. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> | 10 August 2022, 14:21:31 UTC |
| c50cd03 | Christophe JAILLET | 06 August 2022, 20:15:01 UTC | nvme-fabrics: Fix a typo in an error message A 'c' is missing. s/fabris/fabrics/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 10 August 2022, 14:21:31 UTC |
| ec9e96b | Amit Engel | 01 August 2022, 18:40:39 UTC | nvme-fabrics: parse nvme connect Linux error codes This fixes the assumption that errval is an unsigned nvme error Signed-off-by: Amit Engel <amit.engel@dell.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 10 August 2022, 14:05:10 UTC |
| 14446f9 | Zhang Xiaoxu | 26 July 2022, 02:56:32 UTC | nvmet-auth: use kmemdup instead of kmalloc + memcpy For code neat purpose, we can use kmemdup to replace kmalloc + memcpy. Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 10 August 2022, 14:05:09 UTC |
| 9317d00 | Christoph Hellwig | 06 August 2022, 08:29:55 UTC | nvme-fc: fix the fc_appid_store return value "nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally changed the userspace interface for the appid attribute, because the code that decrements "count" to remove a trailing '\n' in the parsing results in the decremented value being incorrectly be returned from the sysfs write. Fix this by keeping an orig_count variable for the full length of the write. Fixes: c814153c83a8 ("nvme-fc: fold t fc_update_appid into fc_appid_store") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Tested-by: Muneendra Kumar M <muneendra.kumar@broadcom.com> | 10 August 2022, 14:05:08 UTC |
| 6fb271f | Ming Lei | 21 July 2022, 00:33:58 UTC | nvme-fc: restart admin queue if the caller needs to restart queue Without restarting admin queue in __nvme_fc_abort_outstanding_ios(), it leaves controller not capable of handling admin pt request, and causes io hang. Fixes it by restarting admin queue if the caller of __nvme_fc_abort_outstanding_ios requires to restart queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: James Smart <jsmart2021@gmail.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 10 August 2022, 14:05:07 UTC |
| fa9db65 | Linus Torvalds | 05 August 2022, 03:00:14 UTC | Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block Pull block driver updates from Jens Axboe: - NVMe pull requests via Christoph: - add support for In-Band authentication (Hannes Reinecke) - handle the persistent internal error AER (Michael Kelley) - use in-capsule data for TCP I/O queue connect (Caleb Sander) - remove timeout for getting RDMA-CM established event (Israel Rukshin) - misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni, Guixin Liu, Xiang wangx) - use command_id instead of req->tag in trace_nvme_complete_rq() (Bean Huo) - various fixes for the new authentication code (Lukas Bulwahn, Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes Reinecke) - small cleanups (Liu Song, Christoph Hellwig) - restore compat_ioctl support (Nick Bowler) - make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg) - enable generic interface (/dev/ngXnY) for unknown command sets (Joel Granados, Christoph Hellwig) - don't always build constants.o (Christoph Hellwig) - print the command name of aborted commands (Christoph Hellwig) - MD pull requests via Song: - Improve raid5 lock contention, by Logan Gunthorpe. - Misc fixes to raid5, by Logan Gunthorpe. - Fix race condition with md_reap_sync_thread(), by Guoqing Jiang. - Fix potential deadlock with raid5_quiesce and raid5_get_active_stripe, by Logan Gunthorpe. - Refactoring md_alloc(), by Christoph" - Fix md disk_name lifetime problems, by Christoph Hellwig - Convert prepare_to_wait() to wait_woken() api, by Logan Gunthorpe; - Fix sectors_to_do bitmap issue, by Logan Gunthorpe. - Work on unifying the null_blk module parameters and configfs API (Vincent) - drbd bitmap IO error fix (Lars) - Set of rnbd fixes (Guoqing, Md Haris) - Remove experimental marker on bcache async device registration (Coly) - Series from cleaning up the bio splitting (Christoph) - Removal of the sx8 block driver. This hardware never really widespread, and it didn't receive a lot of attention after the initial merge of it back in 2005 (Christoph) - A few fixes for s390 dasd (Eric, Jiang) - Followup set of fixes for ublk (Ming) - Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang) - Fixes for the dio dma alignment (Keith) - Misc fixes and cleanups (Ming, Yu, Dan, Christophe * tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits) s390/dasd: Establish DMA alignment s390/dasd: drop unexpected word 'for' in comments ublk_drv: add support for UBLK_IO_NEED_GET_DATA ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA ublk_drv: cleanup ublksrv_ctrl_dev_info ublk_drv: add SET_PARAMS/GET_PARAMS control command ublk_drv: fix ublk device leak in case that add_disk fails ublk_drv: cancel device even though disk isn't up block: fix leaking page ref on truncated direct io block: ensure bio_iov_add_page can't fail block: ensure iov_iter advances for added pages drivers:md:fix a potential use-after-free bug md/raid5: Ensure batch_last is released before sleeping for quiesce md/raid5: Move stripe_request_ctx up md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage() md/raid5: Make is_inactive_blocked() helper md/raid5: Refactor raid5_get_active_stripe() block: pass struct queue_limits to the bio splitting helpers block: move bio_allowed_max_sectors to blk-merge.c block: move the call to get_max_io_size out of blk_bio_segment_split ... | 05 August 2022, 03:00:14 UTC |
| e495274 | Linus Torvalds | 05 August 2022, 02:54:32 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud environment. Otherwise the changes are dominated by rxe fixes. There is another RDMA driver on the list that might get merged next cycle, 'MANA' for the Azure cloud environment. Summary: - Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5 - General spelling/grammer fixes - rdma cm can follow changes in neighbours for control packets - Significant amounts of rxe fixes and spec compliance changes - Use the modern NAPI API - Use the bitmap API instead of open coding - Performance improvements for rtrs - Add the ERDMA driver for Alibaba cloud - Fix a use after free bug in SRP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv() RDMA/rxe: Fix error unwind in rxe_create_qp() RDMA/mlx5: Add missing check for return value in get namespace flow RDMA/rxe: Split qp state for requester and completer RDMA/rxe: Generate error completion for error requester QP state RDMA/rxe: Update wqe_index for each wqe error completion RDMA/srpt: Fix a use-after-free RDMA/srpt: Introduce a reference count in struct srpt_device RDMA/srpt: Duplicate port name members IB/qib: Fix repeated "in" within comments RDMA/erdma: Add driver to kernel build environment RDMA/erdma: Add the ABI definitions RDMA/erdma: Add the erdma module RDMA/erdma: Add connection management (CM) support RDMA/erdma: Add verbs implementation RDMA/erdma: Add verbs header file RDMA/erdma: Add event queue implementation RDMA/erdma: Add cmdq implementation RDMA/erdma: Add main include file RDMA/erdma: Add the hardware related definitions ... | 05 August 2022, 02:54:32 UTC |
| 746fc76 | Linus Torvalds | 05 August 2022, 02:47:37 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ... | 05 August 2022, 02:47:37 UTC |
| 328141e | Linus Torvalds | 05 August 2022, 02:41:09 UTC | Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ... | 05 August 2022, 02:41:09 UTC |
| eff0cb3 | Linus Torvalds | 05 August 2022, 02:30:35 UTC | Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ... | 05 August 2022, 02:30:35 UTC |
| 31be1d0 | Linus Torvalds | 05 August 2022, 01:44:38 UTC | Merge tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support / Core: - Remove DMA_MEMCPY_SG for lack of users - Tegra 234 dmaengine support - Mediatek MT8365 dma support - Apple ADMAC driver Updates: - Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma - rz-dmac updates and device_synchronize support - Bunch of typo in comments fixes in drivers - multithread support in sf-pdma driver" * tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits) dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment dmaengine: axi-dmac: check cache coherency register dmaengine: sh: rz-dmac: Add device_synchronize callback dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed dmaengine: tegra: Add terminate() for Tegra234 dt-bindings: dmaengine: Add compatible for Tegra234 dmaengine: xilinx: use strscpy to replace strlcpy dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script dmaengine: idxd: Correct IAX operation code names dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t) dmaengine: dw-axi-dmac: ignore interrupt if no descriptor dmaengine: dw-axi-dmac: do not print NULL LLI during error dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions dmaengine: imx-sdma: Add missing struct documentation dmaengine: sf-pdma: Add multithread support for a DMA channel dt-bindings: dma: dw-axi-dmac: extend the number of interrupts dmaengine: dmatest: use strscpy to replace strlcpy dmaengine: ste_dma40: fix typo in comment dmaengine: jz4780: fix typo in comment dmaengine: s3c24xx: fix typo in comment ... | 05 August 2022, 01:44:38 UTC |
| 36001a2 | Linus Torvalds | 05 August 2022, 01:40:08 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire clks and prepare and enable them at the same time. This also comes with devm support so that drivers can make a single call to get and prepare and enable the clk and have that all undone when their driver is removed. Many folks have requested this feature over the years, but we've had disagreements about how to implement it and if it was worthwhile to encourage drivers to use such an API. Now it's here, so let's see how it goes. I hope that by introducing this API we can identify drivers that would benefit from further consolidation of clk API usage, possibly by moving such logic to the bus layer and out of drivers altogether. Outside of that major API update, we have the usual collection of driver updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time around. Then we have the long tail of non-critical fixes and minor feature additions to various clk drivers. And finally more clk provider migration to struct clk_parent_data, reducing boot times in the process. Summary: Core: - devm helpers for clk_get() + clk_prepare() and clk_enable() New Drivers: - Support for the camera clock controller in Qualcomm SM8450 and the display and gpu clock controllers in Qualcomm SM8350 - Add support for the Renesas RZ/Five SoC Updates: - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074 - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916 GCC driver - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe GDSCs - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are migrated to use clk_parent_data - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and SM8250 - Qualcomm MSM8916 gains more possible frequencies for its GP clocks. - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the design in IPQ8074 to allow the GCC driver to probe earlier. - The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago - Qualcomm GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously - Correct adc1, nic_media and edma1's parents for NXP i.MX93 - rdiv, mfd values, the return rate in recalc_rate and add more frequencies in the table for fracn-gppll on i.MX - Remove Allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - deduplicate Allwinner ccu_clks arrays - Allwinner H6 GPU DFS support - Adjust Allwinner Kconfig to limit choice - Fix initconst confusion on Renesas R-Car Gen4 - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L - Add PFC and WDT clocks and resets on Renesas RZ/V2M - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on Renesas R-Car S4-8" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits) clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC ... | 05 August 2022, 01:40:08 UTC |
| 37644ca | Linus Torvalds | 05 August 2022, 01:34:05 UTC | Merge tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Here are the updates for this merge window from the GPIO subsystem. We have more lines removed than added thanks to dropping of a driver for a platform that's no longer supported. Otherwise the changes are pretty straightforward: support for some new models, various improvements to existing drivers, some tweaks to the core library code and DT bindings updates. Summary: - remove gpio-vr41xx driver as the only platform using it got dropped too - add support for suspend/resume to gpio-davinci - improvements to the GPIO character device code - add support for disabling bias for in-kernel users (up until now only user-space could set it) - drop unused devm_gpio_free() - fix a refcount issue in gpiolib OF - use device match helpers where applicable - add support for a new model to gpio-rockchip - non-functional improvements in gpio-adp5588 - improve and simplify teardown in gpio-twl4030 and gpio-ucb1400 - modernize the gpio-74xx-mmio and gpio-adnp drivers - coding style improvements in gpio-xilinx, gpio-104-idi-48 - support new model (pca9571) in gpio-pca9570 - convert the DT bindings to YAML for gpio-mvebu and update the document - don't return error codes from remove() in gpio-brcmstb - add a library for the intel 8255 PPI interface and use it in drivers - reduce using magic numbers and improve code readability in several drivers - convert DT bindings to YAML for gpio-tpic2810 - add new models to DT bindings for gpio-frl-imx - Kconfig improvements - other minor tweaks and improvements" * tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits) dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles gpio: 74xx-mmio: Use bits instead of plain numbers for flags gpio: xilinx: add missing blank line after declarations MAINTAINERS: Update Intel 8255 GPIO driver file list gpio: gpio-mm: Implement and utilize register structures gpio: 104-idi-48: Implement and utilize register structures gpio: 104-dio-48e: Implement and utilize register structures gpio: i8255: Introduce the Intel 8255 interface library module gpio: 104-idio-16: Implement and utilize register structures gpio: ws16c48: Implement and utilize register structures gpio: remove VR41XX related gpio driver dt-bindings: gpio: add pull-disable flag gpiolib: acpi: support bias pull disable gpiolib: of: support bias pull disable gpiolib: add support for bias pull disable gpio: 74xx-mmio: use bits.h macros for all masks gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in() gpio: 74xx-mmio: Make use of device properties gpiolib: cdev: compile out HTE unless CONFIG_HTE selected gpiolib: cdev: consolidate edge detector configuration flags ... | 05 August 2022, 01:34:05 UTC |
| 5f08481 | Linus Torvalds | 05 August 2022, 01:19:14 UTC | Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - Microsoft Surface: - SSAM hot unplug support - Surface Pro 8 keyboard cover support - Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio - thinkpad_acpi: - AMD Automatice Mode Transitions (AMT) support - Mellanox: - Vulcan chassis COMe NVSwitch management support - XH3000 support - New generic/shared Intel P2SB (Primary to Sideband) support - Lots of small cleanups - Various small bugfixes - Various new hardware ids / quirks additions * tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits) platform/x86/intel/vsec: Fix wrong type for local status variables platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency platform/x86: pmc_atom: Fix comment typo platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4 platform/olpc: Fix uninitialized data in debugfs write platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource() tools/power/x86/intel-speed-select: Remove unneeded semicolon tools/power/x86/intel-speed-select: Fix off by one check platform/surface: tabletsw: Fix __le32 integer access Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces Documentation/ABI: mlxreg-io: Fix contact info platform/mellanox: mlxreg-io: Add locking for io operations platform/x86: mlx-platform: Add COME board revision register platform/x86: mlx-platform: Add support for new system XH3000 platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis platform/x86: mlx-platform: Add support for systems equipped with two ASICs platform/x86: mlx-platform: Add cosmetic changes for alignment platform/x86: mlx-platform: Make activation of some drivers conditional ... | 05 August 2022, 01:19:14 UTC |
| 5bb3bf2 | Linus Torvalds | 05 August 2022, 01:13:19 UTC | Merge tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "cros_ec_proto: - Leverage Kunit and add Kunit test cases - Clean-ups - Fix typo cros_ec_commands: - Fix typo - Fix compile errors cros_kbd_led_backlight: - Support OF match - Support EC PWM backend cros_ec: - Always expose the last resume result to fix sleep hang detection on ARM-based chromebooks wilco_ec: - Fix typo cros_ec_typec: - Clean-ups - Use Type-C framework utilities to manage altmode structs" * tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (59 commits) platform/chrome: cros_kunit_util: add default value for `msg->result` platform/chrome: merge Kunit utils and test cases platform/chrome: cros_kbd_led_backlight: fix build warning platform/chrome: cros_ec_proto: add Kunit test for cros_ec_cmd() platform/chrome: cros_ec_proto: add Kunit tests for get_sensor_count platform/chrome: cros_ec_proto: add Kunit tests for check_features platform/chrome: cros_ec_proto: add Kunit tests for get_host_event platform/chrome: cros_ec_proto: add Kunit tests for get_next_event platform/chrome: cros_ec_proto: add Kunit test for cros_ec_map_error() platform/chrome: cros_ec_proto: add Kunit tests for cmd_xfer_status platform/chrome: cros_ec_proto: return -EPROTO if empty payload platform/chrome: cros_ec_proto: add Kunit test for empty payload platform/chrome: cros_ec_proto: return -EAGAIN when retries timed out platform/chrome: cros_ec_proto: change Kunit expectation when timed out platform/chrome: cros_ec_proto: separate cros_ec_wait_until_complete() platform/chrome: cros_ec_proto: separate cros_ec_xfer_command() platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_send_command() platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: add "cros_ec_" prefix to send_command() platform/chrome: cros_ec_typec: Register port altmodes ... | 05 August 2022, 01:13:19 UTC |
| da8d07a | Linus Torvalds | 05 August 2022, 01:08:34 UTC | Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Add spi-peripheral-props.yaml references to various SPI device bindings - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x, skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite bindings to DT schema format - New bindings for Arm virtual platforms display, Qualcomm IMEM memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and arm,cortex-a78ae - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec, quanta, and densitron - Add missing MSI and IOMMU properties to host-generic-pci - Remove bindings for removed EFM32 platform - Remove old chosen.txt binding (replaced by schema) - Treewide add missing type information for properties - Treewide fixing of typos and its vs. it's in bindings. Its all good now. - Drop unnecessary quoting in power related schemas - Several LED binding updates which didn't get picked up - Move various bindings to proper directories DT core code: - Convert unittest GPIO related tests to use fwnode - Check ima-kexec-buffer against memory bounds - Print reserved-memory allocation/reservation failures as errors - Cleanup early_init_dt_reserve_memory_arch() - Simplify of_overlay_fdt_apply() tail" * tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits) dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml dt-bindings: power: supply: drop quotes when not needed dt-bindings: power: reset: drop quotes when not needed dt-bindings: power: drop quotes when not needed dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties of/fdt: declared return type does not match actual return type devicetree/bindings: correct possessive "its" typos dt-bindings: net: convert emac_rockchip.txt to YAML dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory dt-bindings: eeprom: at25: use spi-peripheral-props.yaml dt-bindings: display: use spi-peripheral-props.yaml dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema dt-bindings: power: reset: qcom,pon: use absolute path to other schema dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts' dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat' dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' of/fdt: Clean up early_init_dt_reserve_memory_arch() dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high' dt-bindings: rtc: Add EM Microelectronic EM3027 bindings dt-bindings: rtc: ds1307: Convert to json-schema ... | 05 August 2022, 01:08:34 UTC |
| 8d9420c | Linus Torvalds | 05 August 2022, 01:04:28 UTC | Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar) - XP-PEN Deco L support (José Expósito) - support for Elan eKTH6915 touchscreens (Douglas Anderson) - other small assorted fixes and device ID additions * tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits) HID: amd_sfh: Handle condition of "no sensors" HID: amd_sfh: Fix implicit declaration error on i386 HID: apple: Add "GANSS" to the non-Apple list HID: alps: Declare U1_UNICORN_LEGACY support HID: wacom: Force pen out of prox if no events have been received in a while HID: nintendo: Add missing array termination HID: lg-g15: Fix comment typo HID: amd_sfh: Implement SFH1.1 functionality HID: amd_sfh: Move interrupt handling to common interface HID: amd_sfh: Move amd_sfh_work to common interface HID: amd_sfh: Move global functions to static HID: amd_sfh: Add remove operation in amd_mp2_ops HID: amd_sfh: Add PM operations in amd_mp2_ops HID: amd_sfh: Add descriptor operations in amd_mp2_ops HID: amd_sfh: Move request_list variable to client data HID: amd_sfh: Move request_list struct to header file HID: amd_sfh: Move common macros and structures HID: amd_sfh: Add NULL check for hid device HID: core: remove unneeded assignment in hid_process_report() ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments ... | 05 August 2022, 01:04:28 UTC |
| c040862 | Linus Torvalds | 04 August 2022, 22:35:58 UTC | Merge tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa Pull xtensa updates from Max Filippov: - support KCOV - enable ARCH_HAS_GCOV_PROFILE_ALL - minor ISS network driver cleanups * tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL xtensa: enable KCOV support xtensa: iss: fix handling error cases in iss_net_configure() xtensa: iss/network: provide release() callback xtensa: iss/network: drop 'devices' list | 04 August 2022, 22:35:58 UTC |
| 995177a | Linus Torvalds | 04 August 2022, 22:31:09 UTC | Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: "Not much this time around, the 5.20-rc1 development updates for arm are: - add KASAN support for vmalloc space on arm - some sparse fixes from Ben Dooks - rework amba device handling (so device addition isn't deferred)" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9220/1: amba: Remove deferred device addition ARM: 9219/1: fix undeclared soft_restart ARM: 9218/1: dma-mapping: fix pointer/integer warning ARM: 9217/1: add definition of arch_irq_work_raise() ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC | 04 August 2022, 22:31:09 UTC |
| 7df9075 | Linus Torvalds | 04 August 2022, 22:27:20 UTC | Merge tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux Pull csky updates from Guo Ren: - Add jump-label implementation - Add qspinlock support - Enable ARCH_INLINE_READ*/WRITE*/SPIN* - Some fixups and a coding convention * tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux: csky: abiv1: Fixup compile error csky: cmpxchg: Coding convention for BUILD_BUG() csky: Enable ARCH_INLINE_READ*/WRITE*/SPIN* csky: Add qspinlock support csky: Add jump-label implementation csky: Move HEAD_TEXT_SECTION out of __init_begin-end csky: Correct position of _stext csky: Use the bitmap API to allocate bitmaps csky/kprobe: reclaim insn_slot on kprobe unregistration | 04 August 2022, 22:27:20 UTC |
| 25e6bed | Linus Torvalds | 04 August 2022, 22:20:39 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 updates from Hans-Christian Noren Egtvedt: "Mostly changes to documentation and comments" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: video:backlight: remove reference to AVR32 architecture in ltv350qv video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver net: remove cdns,at32ap7000-macb device tree entry misc: update maintainer email address and description for atmel-ssc mfd: remove reference to AVR32 architecture in atmel-smc.c dma:dw: remove reference to AVR32 architecture in core.c | 04 August 2022, 22:20:39 UTC |
| bc79288 | Eric Farman | 04 August 2022, 21:39:26 UTC | s390/dasd: Establish DMA alignment linux-next commit bf8d08532bc1 ("iomap: add support for dma aligned direct-io") changes the alignment requirement to come from the block device rather than the block size, and the default alignment requirement is 512-byte boundaries. Since DASD I/O has page alignments for IDAW/TIDAW requests, let's override this value to restore the expected behavior. Make this change for both ECKD and DIAG disciplines, as they both would fall into this category. Leave FBA alone, since it is always comprised of 512-byte blocks. Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220804213926.3361574-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 August 2022, 22:19:15 UTC |
| bcee43d | Jiang Jian | 04 August 2022, 21:39:25 UTC | s390/dasd: drop unexpected word 'for' in comments there is an unexpected word 'for' in the comments that need to be dropped file - drivers/s390/block/dasd.c line - 1728 /* check for for attention message */ changed to: /* check for attention message */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220623102114.33249-1-jiangjian@cdjrlc.com Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220804213926.3361574-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 August 2022, 22:19:15 UTC |
| 7447691 | Linus Torvalds | 04 August 2022, 22:10:55 UTC | Merge tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series fine tuning virtio support for Xen guests, including removal the now again unused "platform_has()" feature. - a fix for host admin triggered reboot of Xen guests - a simple spelling fix * tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: don't require virtio with grants for non-PV guests kernel: remove platform_has() infrastructure virtio: replace restricted mem access flag with callback xen: Fix spelling mistake xen/manage: Use orderly_reboot() to reboot | 04 August 2022, 22:10:55 UTC |
| 7c5c3a6 | Linus Torvalds | 04 August 2022, 21:59:54 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "Quite a large pull request due to a selftest API overhaul and some patches that had come in too late for 5.19. ARM: - Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack - Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure - Disagregation of the vcpu flags in separate sets to better track their use model. - A fix for the GICv2-on-v3 selftest - A small set of cosmetic fixes RISC-V: - Track ISA extensions used by Guest using bitmap - Added system instruction emulation framework - Added CSR emulation framework - Added gfp_custom flag in struct kvm_mmu_memory_cache - Added G-stage ioremap() and iounmap() functions - Added support for Svpbmt inside Guest s390: - add an interface to provide a hypervisor dump for secure guests - improve selftests to use TAP interface - enable interpretive execution of zPCI instructions (for PCI passthrough) - First part of deferred teardown - CPU Topology - PV attestation - Minor fixes x86: - Permit guests to ignore single-bit ECC errors - Intel IPI virtualization - Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS - PEBS virtualization - Simplify PMU emulation by just using PERF_TYPE_RAW events - More accurate event reinjection on SVM (avoid retrying instructions) - Allow getting/setting the state of the speaker port data bit - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent - "Notify" VM exit (detect microarchitectural hangs) for Intel - Use try_cmpxchg64 instead of cmpxchg64 - Ignore benign host accesses to PMU MSRs when PMU is disabled - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior - Allow NX huge page mitigation to be disabled on a per-vm basis - Port eager page splitting to shadow MMU as well - Enable CMCI capability by default and handle injected UCNA errors - Expose pid of vcpu threads in debugfs - x2AVIC support for AMD - cleanup PIO emulation - Fixes for LLDT/LTR emulation - Don't require refcounted "struct page" to create huge SPTEs - Miscellaneous cleanups: - MCE MSR emulation - Use separate namespaces for guest PTEs and shadow PTEs bitmasks - PIO emulation - Reorganize rmap API, mostly around rmap destruction - Do not workaround very old KVM bugs for L0 that runs with nesting enabled - new selftests API for CPUID Generic: - Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache - new selftests API using struct kvm_vcpu instead of a (vm, id) tuple" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits) selftests: kvm: set rax before vmcall selftests: KVM: Add exponent check for boolean stats selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test selftests: KVM: Check stat name before other fields KVM: x86/mmu: remove unused variable RISC-V: KVM: Add support for Svpbmt inside Guest/VM RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap() RISC-V: KVM: Add G-stage ioremap() and iounmap() functions KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache RISC-V: KVM: Add extensible CSR emulation framework RISC-V: KVM: Add extensible system instruction emulation framework RISC-V: KVM: Factor-out instruction emulation into separate sources RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function RISC-V: KVM: Fix variable spelling mistake RISC-V: KVM: Improve ISA extension by using a bitmap KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs() KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT KVM: x86: Do not block APIC write for non ICR registers ... | 04 August 2022, 21:59:54 UTC |
| f0a892f | Sudip Mukherjee | 04 August 2022, 18:01:46 UTC | drm/amd/amdgpu: fix build failure due to implicit declaration The builds for alpha and mips allmodconfig fails with the error: drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:23: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration] drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:21: error: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:545:33: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration] Add the header file for vmalloc and vfree. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 August 2022, 19:29:10 UTC |
| c1c7670 | Linus Torvalds | 04 August 2022, 19:12:54 UTC | Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ... | 04 August 2022, 19:12:54 UTC |
| 723c188 | Linus Torvalds | 04 August 2022, 19:01:42 UTC | Merge tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver patches for 6.0-rc1. Another round where we removed more lines of code than added, always a nice progression. Some of that came from the movement of the vme code back into staging, and removal of some other of the vme driver code as there are no known users and it is very obsolete and unmaintained. It can be added back easily if someone offers to maintain it. Other than that this merge has lots of little things: - huge cleanups for r8188eu driver - minor cleanups for other wifi drivers - tiny loop fixes for greybus code - other small coding style fixes All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits) staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function staging: vt6655: Rename MACvClearStckDS staging: fbtft: core: set smem_len before fb_deferred_io_init call staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics staging: r8188eu: make dump_chip_info() static staging: r8188eu: remove DoReserved prototype staging: r8188eu: remove OnAtim prototype staging: r8188eu: remove SetHwReg8188EU() staging: r8188eu: make update_TSF() and correct_TSF() static staging: r8188eu: remove unused parameter from update_TSF() staging: r8188eu: remove unused parameter from correct_TSF() staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU() staging: pi433: remove duplicated comments staging: qlge: refine variable name staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function ... | 04 August 2022, 19:01:42 UTC |
| 78acd4c | Nathan Chancellor | 03 August 2022, 16:24:22 UTC | usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable() Clang warns: drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized] dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); ^~~~~~~~ include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg' dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~ include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg' dev, fmt, ##__VA_ARGS__) ^~~ include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call' __dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__) ^~~~~~~~~~~ include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call' func(&id, ##__VA_ARGS__); \ ^~~~~~~~~~~ drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning struct cdns3_device *priv_dev; ^ = NULL 1 error generated. The priv_dev assignment was moved below the if statement to avoid potentially dereferencing ep before it was checked but priv_dev is used in the dev_dbg() call. To fix this, move the priv_dev and comp_desc assignments back to their original spot and hoist the ep check above those assignments with a call to pr_debug() instead of dev_dbg(). Fixes: c3ffc9c4ca44 ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()") Link: https://github.com/ClangBuiltLinux/linux/issues/1680 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 August 2022, 18:53:48 UTC |
| 9e2e5ea | Linus Torvalds | 04 August 2022, 18:41:28 UTC | Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of Thunderbolt and USB changes for 6.0-rc1. Lots of little things here, nothing major, just constant development on some new hardware support and cleanups of older drivers. Highlights are: - lots of typec changes and improvements for new hardware - new gadget controller driver - thunderbolt support for new hardware - the normal set of new usb-serial device ids and cleanups - loads of dwc3 controller fixes and improvements - mtu3 driver updates - testusb fixes for longtime issues (not many people use this tool it seems.) - minor driver fixes and improvements over the USB tree - chromeos platform driver changes were added and then reverted as they depened on some typec changes, but the cross-tree merges caused problems so they will come back later through the platform tree. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits) usb: misc: onboard_usb_hub: Remove duplicated power_on delay usb: misc: onboard_usb_hub: Add TI USB8041 hub support usb: misc: onboard_usb_hub: Add reset-gpio support USB: usbsevseg: convert sysfs snprintf to sysfs_emit dt-bindings: usb: Add binding for TI USB8041 hub controller ARM: multi_v7_defconfig: enable USB onboard HUB driver ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub dt-bindings: usb: generic-ehci: allow usb-hcd schema properties usb: typec: ucsi: stm32g0: add bootloader support usb: typec: ucsi: stm32g0: add support for stm32g0 controller dt-bindings: usb: typec: add bindings for stm32g0 controller usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable() usb/chipidea: fix repeated words in comments usb: renesas-xhci: Do not print any log while fw verif success usb: typec: retimer: Add missing id check in match callback USB: xhci: Fix comment typo usb/typec/tcpm: fix repeated words in comments usb/musb: fix repeated words in comments ... | 04 August 2022, 18:41:28 UTC |
| cfeafd9 | Linus Torvalds | 04 August 2022, 18:31:20 UTC | Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / kernfs updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.0-rc1. The "biggest" thing in here is some scalability improvements for kernfs for large systems. Other than that, included in here are: - arch topology and cache info changes that have been reviewed and discussed a lot. - potential error path cleanup fixes - deferred driver probe cleanups - firmware loader cleanups and tweaks - documentation updates - other small things All of these have been in the linux-next tree for a while with no reported problems" * tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits) docs: embargoed-hardware-issues: fix invalid AMD contact email firmware_loader: Replace kmap() with kmap_local_page() sysfs docs: ABI: Fix typo in comment kobject: fix Kconfig.debug "its" grammar kernfs: Fix typo 'the the' in comment docs: driver-api: firmware: add driver firmware guidelines. (v3) arch_topology: Fix cache attributes detection in the CPU hotplug path ACPI: PPTT: Leave the table mapped for the runtime usage cacheinfo: Use atomic allocation for percpu cache attributes drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist MAINTAINERS: Change mentions of mpm to olivia docs: ABI: sysfs-devices-soc: Update Lee Jones' email address docs: ABI: sysfs-class-pwm: Update Lee Jones' email address Documentation/process: Add embargoed HW contact for LLVM Revert "kernfs: Change kernfs_notify_list to llist." ACPI: Remove the unused find_acpi_cpu_cache_topology() arch_topology: Warn that topology for nested clusters is not supported arch_topology: Add support for parsing sockets in /cpu-map arch_topology: Set cluster identifier in each core/thread from /cpu-map arch_topology: Limit span of cpu_clustergroup_mask() ... | 04 August 2022, 18:31:20 UTC |
| 228dfe9 | Linus Torvalds | 04 August 2022, 18:05:48 UTC | Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ... | 04 August 2022, 18:05:48 UTC |
| 798cd57 | Dave Airlie | 04 August 2022, 05:50:20 UTC | drm/amd/display: restore code for plane with no modifiers When this file was split in commit 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") this chunk seemed to get dropped. Linus noticed on this rx580 and I've reproduced on FIJI which makes sense as these are pre-modifier GPUs. With this applied, I get gdm back. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Signed-off-by: Dave Airlie <airlied@redhat.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 August 2022, 17:22:40 UTC |
| c4f36c3 | Bjorn Helgaas | 04 August 2022, 16:46:53 UTC | Merge branch 'pci/header-cleanup-immutable' - Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne) - Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used (Stafford Horne) - Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne) - Move common PCI definitions that arches sometimes override to asm-generic/pci.h (Stafford Horne) - Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed (bisection hole here) (Randy Dunlap) * pci/header-cleanup-immutable: PCI: Stub __pci_ioport_map() for arches that don't support it at all x86/cyrix: include header linux/isa-dma.h asm-generic: Add new pci.h and use it csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE PCI: Move isa_dma_bridge_buggy out of asm/dma.h PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h | 04 August 2022, 16:46:53 UTC |
| 805f91b | Bjorn Helgaas | 04 August 2022, 16:46:53 UTC | Merge branch 'pci/misc' - Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset (Bjorn Helgaas) - Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors (Pali Rohár) * pci/misc: PCI/ACPI: Update link to PCI firmware specification PCI: Drop of_match_ptr() to avoid unused variables | 04 August 2022, 16:46:53 UTC |
| ed89d69 | Bjorn Helgaas | 04 August 2022, 16:46:52 UTC | Merge branch 'pci/ctrl/pm-ops' - Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP" or "__maybe_unused" (Bjorn Helgaas) * pci/ctrl/pm-ops: PCI: Convert to new *_PM_OPS macros | 04 August 2022, 16:46:52 UTC |
| 56ebef0 | Bjorn Helgaas | 04 August 2022, 16:46:52 UTC | Merge branch 'pci/ctrl/xilinx-cpm' - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada) * pci/ctrl/xilinx-cpm: MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers PCI: xilinx-cpm: Add support for Versal CPM5 Root Port dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port | 04 August 2022, 16:46:52 UTC |
| a91c6db | Bjorn Helgaas | 04 August 2022, 16:46:51 UTC | Merge branch 'pci/ctrl/vmd' - Use devm_kasprintf() instead of simple kasprintf() (Subramanian Mohan) - Add [8086:7D0B] and [8086:AD0B] devices to VMD driver (Francisco Munoz) * pci/ctrl/vmd: PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs PCI: vmd: Use devm_kasprintf() instead of simple kasprintf() | 04 August 2022, 16:46:51 UTC |
| 64451ac | Bjorn Helgaas | 04 August 2022, 16:46:51 UTC | Merge branch 'pci/ctrl/tegra194' - Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c | 04 August 2022, 16:46:51 UTC |
| 085c2d6 | Bjorn Helgaas | 04 August 2022, 16:41:59 UTC | Merge branch 'pci/ctrl/switchtec' - Prefer ida_alloc()/free() over ida_simple_get()/remove() (Ke Liu) * pci/ctrl/switchtec: PCI: switchtec: Prefer ida_alloc()/free() over ida_simple_get()/remove() | 04 August 2022, 16:41:59 UTC |
| 3aa321d | Bjorn Helgaas | 04 August 2022, 16:41:58 UTC | Merge branch 'pci/ctrl/rcar-gen2' - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding (Herve Codina) - Add Renesas RZ/N1D compatible string ("renesas,pci-rzn1") to rcar-gen2 driver (Herve Codina) * pci/ctrl/rcar-gen2: PCI: rcar-gen2: Add RZ/N1 SOC family compatible string dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032 dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema | 04 August 2022, 16:41:58 UTC |
| 9195e6d | Bjorn Helgaas | 04 August 2022, 16:41:58 UTC | Merge branch 'pci/ctrl/qcom' - Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation | 04 August 2022, 16:41:58 UTC |
| 4faef10 | Bjorn Helgaas | 04 August 2022, 16:41:57 UTC | Merge branch 'pci/ctrl/microchip' - Fix refcount leak in mc_pcie_init_irq_domains() (Miaoqian Lin) * pci/ctrl/microchip: PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains() | 04 August 2022, 16:41:57 UTC |
| f3305ae | Bjorn Helgaas | 04 August 2022, 16:41:57 UTC | Merge branch 'pci/ctrl/mediatek-gen3' - Fix refcount leak in mtk_pcie_init_irq_domains() (Miaoqian Lin) - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) * pci/ctrl/mediatek-gen3: PCI: mediatek-gen3: Print LTSSM state when PCIe link down PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains() | 04 August 2022, 16:41:57 UTC |
| 359a983 | Bjorn Helgaas | 04 August 2022, 16:41:57 UTC | Merge branch 'pci/ctrl/mediatek' - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of mediatek driver for ARCH_AIROHA (Felix Fietkau) * pci/ctrl/mediatek: PCI: mediatek: Allow building for ARCH_AIROHA dt-bindings: PCI: mediatek: Add Airoha EN7532 support | 04 August 2022, 16:41:57 UTC |
| b4773c5 | Bjorn Helgaas | 04 August 2022, 16:41:56 UTC | Merge branch 'pci/ctrl/loongson' - Wrap ARM64-specific MCFG quirks in #ifdef so Loongson can use the file (Huacai Chen) - Use generic (not 32-bit only) config accesses for LS2K/LS7A (Huacai Chen) - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) * pci/ctrl/loongson: PCI: loongson: Work around LS7A incorrect Interrupt Pin registers PCI: loongson: Don't access non-existent devices PCI: loongson: Add ACPI init support PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A PCI/ACPI: Guard ARM64-specific mcfg_quirks | 04 August 2022, 16:41:56 UTC |
| 1350686 | Bjorn Helgaas | 04 August 2022, 16:41:56 UTC | Merge branch 'pci/ctrl/iproc' - Use bitmap API to allocate bitmaps instead of doing it by hand (Christophe JAILLET) * pci/ctrl/iproc: PCI: iproc: Use bitmap API to allocate bitmaps | 04 August 2022, 16:41:56 UTC |
| 468276d | Bjorn Helgaas | 04 August 2022, 16:41:55 UTC | Merge branch 'pci/ctrl/imx6' - Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() | 04 August 2022, 16:41:55 UTC |
| 0c8b7d1 | Bjorn Helgaas | 04 August 2022, 16:41:55 UTC | Merge branch 'pci/ctrl/fu740' - Remove unnecessary include files (Bjorn Helgaas) * pci/ctrl/fu740: PCI: fu740: Remove unnecessary include files | 04 August 2022, 16:41:55 UTC |
| fea77e9 | Bjorn Helgaas | 04 August 2022, 16:41:55 UTC | Merge branch 'pci/ctrl/exynos' - Move samsung phy-exynos-pcie init all to exynos5433_pcie_phy_init() instead of splitting across phy_init() and phy_power_on() (Marek Szyprowski) - Call phy_init() before phy_power_on() for samsung phy-exynos-pcie, as required by the PHY programming model (Marek Szyprowski) * pci/ctrl/exynos: PCI: exynos: Correct generic PHY usage phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks | 04 August 2022, 16:41:55 UTC |
| 94d1331 | Bjorn Helgaas | 04 August 2022, 16:41:54 UTC | Merge branch 'pci/ctrl/dwc-edma' - Remove unused struct dw_edma_chip.irq (Frank Li) - Move eDMA private data from struct dw_edma to struct dw_edma_chip (Frank Li) - Convert "struct dw_edma_region rg_region" to "void __iomem *reg_base" since only the virtual address (not physical address or size) is used (Frank Li) - Rename "*_ch_cnt" to "ll_*_cnt" to reflect actual usage (Frank Li) - Drop dma_slave_config.direction field usage (Serge Semin) - Fix eDMA Rd/Wr-channels and DMA-direction semantics (Serge Semin) - Add chip-specific DW_EDMA_CHIP_LOCAL flag to indicate that local eDMA doesn't require generating MSIs to remote (Frank Li) - Enable DMA tests for endpoints that support it (Frank Li) * pci/ctrl/dwc-edma: PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities dmaengine: dw-edma: Add support for chip-specific flags dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics dmaengine: dw-edma: Drop dma_slave_config.direction field usage dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip dmaengine: dw-edma: Detach the private data and chip info structures dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chip | 04 August 2022, 16:41:54 UTC |
| 964db79 | Bjorn Helgaas | 04 August 2022, 16:41:54 UTC | Merge branch 'pci/ctrl/dwc' - Stop link on host_init errors and de-initialization (Serge Semin) - Add support for unrolled iATU register space in dw_pcie_disable_atu() (Serge Semin) - Disable outbound windows only for controllers that use iATU (Serge Semin) - Set INCREASE_REGION_SIZE flag based on limit address, not on the size, since even a small size may cross a 4GB boundary (Serge Semin) - Deallocate EPC memory on dw_pcie_ep_init() errors to avoid a leak (Serge Semin) - Always enable CDM check if "snps,enable-cdm-check" exists instead of exiting early if the optional "num-lanes" was absent (Serge Semin) - Simplify detection of whether we're using unrolled iATU registers (Serge Semin) - Make dw_pcie_link_up() more generic by using dw_pcie_readl_dbi() instead of readl() (Serge Semin) - Add dw_pcie_start_link() and dw_pcie_stop_link() wrappers to factor out checks for ops being implemented (Serge Semin) - Move io_cfg_atu_shared to struct pcie_port and rename to cfg0_io_shared, since it's not used by dwc common code or dwc endpoint code (Serge Semin) - Rename struct pcie_port to dw_pcie_rp to indicate that it's DesignWare-specific (Serge Semin) - Drop unused struct dw_plat_pcie regmap pointer (Serge Semin) - Fix some coding style issues (Serge Semin) - Log link speed and width if it comes up (Serge Semin) - Save DWC IP core version in native format as read from PORT_LOGIC.PCIE_VERSION_OFF register (Serge Semin) - Read DWC IP core version from PORT_LOGIC.PCIE_VERSION_OFF (Serge Semin) - Add macros to compare Synopsys IP core versions (Serge Semin) - Drop manual DWC IP core version setup from intel-gw and tegra194 (Serge Semin) - Add dw_pcie_ops.host_deinit() callback (Serge Semin) - Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO (Serge Semin) - Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB (Serge Semin) - Simplify in/outbound iATU setup methods and reduce duplicated code (Serge Semin) - Detect iATU region size from hardware (Serge Semin) - Validate iATU outbound mappings against hardware constraints (Serge Semin) - Check for errors in iATU setup (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Use the bitmap API to allocate bitmaps instead of open-coding it (Christophe JAILLET) - Correct dw_pcie_free_msi() checking for when to remove IRQ handler and data (Dmitry Baryshkov) - Split MSI init to new dw_pcie_msi_host_init() function (Dmitry Baryshkov) - Convert struct pcie_port.msi_irq to an array so we can support more than 32 MSI interrupts (Dmitry Baryshkov) - Handle MSIs routed to multiple GIC interrupts for Qualcomm platforms with groups of 32 MSI vectors (Dmitry Baryshkov) - Add additional MSI interrupts to qcom DT (Dmitry Baryshkov) * pci/ctrl/dwc: dt-bindings: PCI: qcom: Support additional MSI vectors PCI: dwc: Handle MSIs routed to multiple GIC interrupts PCI: dwc: Convert struct pcie_port.msi_irq to an array PCI: dwc: Split MSI IRQ parsing/allocation to a separate function PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() PCI: dwc: Use the bitmap API to allocate bitmaps PCI: dwc: Fix MSI msi_msg DMA mapping PCI: dwc: Check iATU in/outbound range setup status PCI: dwc: Validate iATU outbound mappings against hardware constraints PCI: dwc: Add iATU regions size detection procedure PCI: dwc: Simplify in/outbound iATU setup methods PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO PCI: dwc: Add dw_pcie_ops.host_deinit() callback PCI: tegra194: Drop manual DW PCIe controller version setup PCI: intel-gw: Drop manual DW PCIe controller version setup PCI: dwc: Add macros to compare Synopsys IP core versions PCI: dwc: Read DWC IP core version from register PCI: dwc: Use native DWC IP core version representation PCI: dwc: Detect iATU settings after getting "addr_space" resource PCI: dwc: Log link speed and width if it comes up PCI: dwc-plat: Drop dw_plat_pcie_of_match[] forward declaration PCI: dwc-plat: Drop unused regmap pointer PCI: dwc-plat: Simplify dw_plat_pcie_probe() return values PCI: dwc: Rename struct pcie_port to dw_pcie_rp PCI: dwc: Move io_cfg_atu_shared to struct pcie_port PCI: dwc: Add start_link/stop_link inlines PCI: dwc: Reuse local pointer to the resource data PCI: dwc: Organize local variable usage PCI: dwc: Convert dw_pcie_link_up() to use dw_pcie_readl_dbi() PCI: dwc: Simplify unrolled iATU detection PCI: dwc: Add newlines to log messages PCI: dwc: Add braces to multi-line if-else statements PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address PCI: dwc: Disable outbound windows only for controllers using iATU PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu() PCI: dwc: Stop link on host_init errors and de-initialization | 04 August 2022, 16:41:54 UTC |
| 9154b00 | Bjorn Helgaas | 04 August 2022, 16:41:53 UTC | Merge branch 'pci/ctrl/brcmstb' - Remove unnecessary forward declarations (Jim Quinlan) - Prevent config space access when link is down (Jim Quinlan) - Split post-link up initialization to brcm_pcie_start_link() (Jim Quinlan) - Enable child bus device regulators described under Root Ports in DT (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) - Rename .map_bus() functions to end with 'map_bus' as they do in other drivers (Jim Quinlan) * pci/ctrl/brcmstb: PCI: brcmstb: Rename .map_bus() functions to end with 'map_bus' PCI: brcmstb: Disable/enable regulators in suspend/resume PCI: brcmstb: Enable child bus device regulators from DT PCI: brcmstb: Split post-link up initialization to brcm_pcie_start_link() PCI: brcmstb: Prevent config space access when link is down PCI: brcmstb: Remove unnecessary forward declarations | 04 August 2022, 16:41:53 UTC |
| 95aa832 | Bjorn Helgaas | 04 August 2022, 16:41:53 UTC | Merge branch 'pci/ctrl/aardvark' - Add support for AER capability on emulated bridge (Pali Rohár) - Add support for Slot capability on emulated bridge (Pali Rohár) * pci/ctrl/aardvark: PCI: aardvark: Fix reporting Slot capabilities on emulated bridge PCI: aardvark: Add support for AER registers on emulated bridge | 04 August 2022, 16:41:53 UTC |
| d22b9e6 | Bjorn Helgaas | 04 August 2022, 16:41:53 UTC | Merge branch 'pci/virtualization' - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) * pci/virtualization: PCI: Add ACS quirk for Broadcom BCM5750x NICs | 04 August 2022, 16:41:53 UTC |
| bac0f44 | Bjorn Helgaas | 04 August 2022, 16:41:52 UTC | Merge branch 'pci/resource' - Replace sparc pci_mmap_page_range() wrapper. This still leaves a sparc-specific pci_mmap_resource_range(), but it's only one interface instead of two (Arnd Bergmann) - Remove sparc-specific pci_mmap_resource_range() by implementing pci_iobar_pfn(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) * pci/resource: sparc: Use generic pci_mmap_resource_range() PCI: Remove pci_mmap_page_range() wrapper | 04 August 2022, 16:41:52 UTC |
| 3dc4d33 | Bjorn Helgaas | 04 August 2022, 16:41:52 UTC | Merge branch 'pci/pm' - Convert documentation examples to generic power management (Bjorn Helgaas) * pci/pm: PCI/doc: Convert examples to generic power management | 04 August 2022, 16:41:52 UTC |
| 5a20930 | Bjorn Helgaas | 04 August 2022, 16:41:52 UTC | Merge branch 'pci/err' - Recognize disconnected devices so we don't bother trying to set them to "frozen" or "normal" state (Christoph Hellwig) - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - Configure ECRC for every device, including hot-added ones (Stefan Roese) - Keep AER error reporting enabled for switches (Stefan Roese) - Enable error reporting for all devices that support AER (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) * pci/err: PCI/AER: Iterate over error counters instead of error strings PCI/AER: Enable error reporting when AER is native PCI/portdrv: Don't disable AER reporting in get_port_device_capability() PCI/AER: Configure ECRC for every device PCI: Clear PCI_STATUS when setting up device PCI/ERR: Recognize disconnected devices in report_error_detected() | 04 August 2022, 16:41:52 UTC |
| dc52531 | Bjorn Helgaas | 04 August 2022, 16:41:51 UTC | Merge branch 'pci/enumeration' - Split out ARI "next function" handling from the traditional one (Niklas Schnelle) - Move jailhouse "isolated function" (non-zero functions where function 0 doesn't exist) handling to pci_scan_slot() to avoid duplicating multi-function scanning in pci_scan_child_bus_extend() (Niklas Schnelle) - Extend "isolated function" probing to s390 (Niklas Schnelle). - Allow s390 zPCI zbus without a function 0 (Niklas Schnelle) * pci/enumeration: s390/pci: allow zPCI zbus without a function zero PCI: Extend isolated function probing to s390 PCI: Move jailhouse's isolated function handling to pci_scan_slot() PCI: Split out next_ari_fn() from next_fn() PCI: Clean up pci_scan_slot() | 04 August 2022, 16:41:51 UTC |
| 4921043 | Bjorn Helgaas | 04 August 2022, 16:41:51 UTC | Merge branch 'pci/endpoint' - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) * pci/endpoint: PCI: endpoint: Don't stop controller when unbinding endpoint function | 04 August 2022, 16:41:51 UTC |
| 50f7a54 | Bjorn Helgaas | 04 August 2022, 16:41:50 UTC | Merge branch 'pci/aspm' - Remove pcie_aspm_pm_state_change(), which overwrites ASPM config on power state changes (Kai-Heng Feng) * pci/aspm: PCI/ASPM: Unexport pcie_aspm_support_enabled() PCI/ASPM: Remove pcie_aspm_pm_state_change() | 04 August 2022, 16:41:50 UTC |
| b44f2fd | Linus Torvalds | 04 August 2022, 02:52:08 UTC | Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Highlights: - New driver for logicvc - which is a display IP core. - EDID parser rework to add new extensions - fbcon scrolling improvements - i915 has some more DG2 work but not enabled by default, but should have enough features for userspace to work now. Otherwise it's lots of work all over the place. Detailed summary: New driver: - logicvc vfio: - use aperture API core: - of: Add data-lane helpers and convert drivers - connector: Remove deprecated ida_simple_get() media: - Add various RGB666 and RGB888 format constants panel: - Add HannStar HSD101PWW - Add ETML0700Y5DHA dma-buf: - add sync-file API - set dma mask for udmabuf devices fbcon: - Improve scrolling performance - Sanitize input fbdev: - device unregistering fixes - vesa: Support COMPILE_TEST - Disable firmware-device registration when first native driver loads aperture: - fix segfault during hot-unplug - export for use with other subsystems client: - use driver validated modes dp: - aux: make probing more reliable - mst: Read extended DPCD capabilities during system resume - Support waiting for HDP signal - Port-validation fixes edid: - CEA data-block iterators - struct drm_edid introduction - implement HF-EEODB extension gem: - don't use fb format non-existing planes probe-helper: - use 640x480 as displayport fallback scheduler: - don't kill jobs in interrupt context bridge: - Add support for i.MX8qxp and i.MX8qm - lots of fixes/cleanups - Add TI-DLPC3433 - fy07024di26a30d: Optional GPIO reset - ldb: Add reg and reg-name properties to bindings, Kconfig fixes - lt9611: Fix display sensing; - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling - tc358775: Fix clock settings - ti-sn65dsi83: Allow GPIO to sleep - adv7511: I2C fixes - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback - fsl-ldb: Drop DE flip - ti-sn65dsi86: Convert to atomic modesetting amdgpu: - use atomic fence helpers in DM - fix VRAM address calculations - export CRTC bpc via debugfs - Initial devcoredump support - Enable high priority gfx queue on asics which support it - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 / SDMA 6 - Add gfxoff status query for vangogh - Fix timestamps for cursor only commits - Adjust GART size on newer APUs for S/G display - fix buddy memory corruption amdkfd: - MMU notifier fixes - P2P DMA support using dma-buf - Add available memory IOCTL - HMM profiler support - Simplify GPUVM validation - Unified memory for CWSR save/restore area i915: - General driver clean-up - DG2 enabling (still under force probe) - DG2 small BAR memory support - HuC loading support - DG2 workarounds - DG2/ATS-M device IDs added - Ponte Vecchio prep work and new blitter engines - add Meteorlake support - Fix sparse warnings - DMC MMIO range checks - Audio related fixes - Runtime PM fixes - PSR fixes - Media freq factor and per-gt enhancements - DSI fixes for ICL+ - Disable DMC flip queue handlers - ADL_P voltage swing updates - Use more the VBT for panel information - Fix on Type-C ports with TBT mode - Improve fastset and allow seamless M/N changes - Accept more fixed modes with VRR/DMRRS panels - Disable connector polling for a headless SKU - ADL-S display PLL w/a - Enable THP on Icelake and beyond - Fix i915_gem_object_ggtt_pin_ww regression on old platforms - Expose per tile media freq factor in sysfs - Fix dma_resv fence handling in multi-batch execbuf - Improve on suspend / resume time with VT-d enabled - export CRTC bpc settings via debugfs msm: - gpu: a619 support - gpu: Fix for unclocked GMU register access - gpu: Devcore dump enhancements - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings - WB support on sc7180 - dp: dropped custom bulk clock implementation - fix link retraining on resolution change - hdmi: dropped obsolete GPIO support tegra: - context isolation for host1x engines - tegra234 soc support mediatek: - add vdosys0/1 for mt8195 - add MT8195 dp_intf driver exynos: - Fix resume function issue of exynos decon driver by calling clk_disable_unprepare() properly if clk_prepare_enable() failed. nouveau: - set of misc fixes/cleanups - display cleanups gma500: - Cleanup connector I2C handling hyperv: - Unify VRAM allocation of Gen1 and Gen2 meson: - Support YUV422 output; Refcount fixes mgag200: - Support damage clipping - Support gamma handling - Protect concurrent HW access - Fixes to connector - Store model-specific limits in device-info structure - fix PCI register init panfrost: - Valhall support r128: - Fix bit-shift overflow rockchip: - Locking fixes in error path ssd130x: - Fix built-in linkage udl: - Always advertize VGA connector ast: - Support multiple outputs - fix black screen on resume sun4i: - HDMI PHY cleanups vc4: - Add support for BCM2711 vkms: - Allocate output buffer with vmalloc() mcde: - Fix ref-count leak mxsfb/lcdif: - Support i.MX8MP LCD controller stm/ltdc: - Support dynamic Z order - Support mirroring ingenic: - Fix display at maximum resolution" * tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits) drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code drm/amdgpu: enable support for psp 13.0.4 block drm/amdgpu: add files for PSP 13.0.4 drm/amdgpu: add header files for MP 13.0.4 drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index drm/amdgpu: send msg to IMU for the front-door loading drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b" drm/amdgpu: fix hive reference leak when reflecting psp topology info drm/amd/pm: enable GFX ULV feature support for SMU13.0.0 drm/amd/pm: update driver if header for SMU 13.0.0 drm/amdgpu: move mes self test after drm sched re-started drm/amdgpu: drop non-necessary call trace dump drm/amdgpu: enable VCN cg and JPEG cg/pg drm/amdgpu: vcn_4_0_2 video codec query drm/amdgpu: add VCN_4_0_2 firmware support drm/amdgpu: add VCN function in NBIO v7.7 drm/amdgpu: fix a vcn4 boot poll bug in emulation mode drm/amd/amdgpu: add memory training support for PSP_V13 drm/amdkfd: remove an unnecessary amdgpu_bo_ref drm/amd/pm: Add get_gfx_off_status interface for yellow carp ... | 04 August 2022, 02:52:08 UTC |
| 12b6804 | Linus Torvalds | 04 August 2022, 02:29:28 UTC | Merge tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Semi AR0521 sensor - rkisp1 CSI code was split into a separate file - sun6i has gained support for the A31 MIPI CSI-2 controller - sun8i has gained support for the A83T MIPI CSI-2 controller - vimc driver got support for virtual lens - HEVC uAPI has gained its final form and got added to public headers - hantro and cedrus got updates on H-265 support - stkwebcam was promoted from staging - atomisp staging driver got cleanups on its hmm and kmap related logic - ov5640 gained support for more modes and got some rework - imx7-media-csi staging driver got several improvements related to mc API support - uvcvideo now handles better power line control - mediatec vcodec gained support for new hardware and got some codec updates - Lots of other bug fixes, improvements and cleanups. * tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits) media: hantro: Remove dedicated control documentation hantro: Remove incorrect HEVC SPS validation media: cedrus: hevc: Add check for invalid timestamp media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl() media: Documentation: mc-core: Fix typo media: videodev2.h.rst.exceptions: add missing exceptions media: vimc: wrong pointer is used with PTR_ERR media: rkisp1: debug: Add dump file in debugfs for MI main path registers media: rkisp1: Make the internal CSI-2 receiver optional media: rkisp1: Add infrastructure to support ISP features media: rkisp1: Support the ISP parallel input media: dt-bindings: media: rkisp1: Add port for parallel interface media: rkisp1: Use fwnode_graph_for_each_endpoint media: rkisp1: csi: Plumb the CSI RX subdev media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver media: rkisp1: isp: Disallow multiple active sources media: rkisp1: isp: Rename rkisp1_get_remote_source() media: rkisp1: isp: Constify various local variables media: rkisp1: isp: Fix whitespace issues ... | 04 August 2022, 02:29:28 UTC |
| 80dc759 | Linus Torvalds | 04 August 2022, 02:23:51 UTC | Merge tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers: Microchip CoreI2C, Renesas RZV2M - quite some DT schema conversions and extensions - and a bunch of driver updates and improvements * tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: extend documentation about retvals of master_xfer functions i2c: mux-gpmux: Add of_node_put() when breaking out of loop dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126 i2c: qcom-geni: Use the correct return value i2c: cadence: Support PEC for SMBus block read i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer() i2c: brcmstb: Use dev_name() for adapter name i2c: Add Renesas RZ/V2M controller dt-bindings: i2c: Document RZ/V2M I2C controller i2c: mlxcpld: Add callback to notify probing completion i2c: scmi: Replace open coded device_get_match_data() i2c: stm32: add support for the STM32MP13 soc dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13 dt-bindings: i2c: i2c-rk3x: add rk3588 compatible i2c: add support for microchip fpga i2c controllers i2c: i801: Add support for Intel Meteor Lake-P dt-bindings: i2c: nomadik: Add power domain to binding dt-bindings: i2c: nomadik: Drop unused voltage supply from example i2c: Fix a potential use after free i2c: hisi: use HZ_PER_KHZ macro in units.h ... | 04 August 2022, 02:23:51 UTC |
| f86d1fb | Linus Torvalds | 03 August 2022, 23:29:08 UTC | Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ... | 03 August 2022, 23:29:08 UTC |
| 526942b | Linus Torvalds | 03 August 2022, 22:26:04 UTC | Merge tag 'ata-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Some code refactoring for the pata_hpt37x and pata_hpt3x2n drivers, from Sergei. - Several patches to cleanup in libata-core, libata-scsi and libata-eh code: fixes arguments and variables types, change some functions declaration to static and fix for a typo in a comment. From Sergey and Xiang. - Fix a compilation warning in the pata_macio driver, from me. - A fix for the expected number of resources in the sata_mv driver fix, from Andrew. * tag 'ata-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: sata_mv: Fixes expected number of resources now IRQs are gone ata: libata-scsi: fix result type of ata_ioc32() ata: pata_macio: Fix compilation warning ata: libata-eh: fix sloppy result type of ata_internal_cmd_timeout() ata: libata-core: fix sloppy parameter type in ata_exec_internal[_sg]() ata: make ata_port::fastdrain_cnt *unsigned int* ata: libata-eh: fix sloppy result type of ata_eh_nr_in_flight() ata: libata-core: make ata_exec_internal_sg() *static* ata: make transfer mode masks *unsigned int* ata: libata-core: get rid of *else* branches in ata_id_n_sectors() ata: libata-core: fix sloppy typing in ata_id_n_sectors() ata: pata_hpt3x2n: pass base DPLL frequency to hpt3x2n_pci_clock() ata: pata_hpt37x: merge hpt374_read_freq() to hpt37x_pci_clock() ata: pata_hpt37x: factor out hpt37x_pci_clock() ata: pata_hpt37x: move claculating PCI clock from hpt37x_clock_slot() ata: libata: Fix syntax errors in comments | 03 August 2022, 22:26:04 UTC |
| a39b5db | Linus Torvalds | 03 August 2022, 22:21:53 UTC | Merge tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs update from Damien Le Moal: "A single change for this cycle to simplify handling of the memory page used as super block buffer during mount (from Fabio)" * tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Call page_address() on page acquired with GFP_KERNEL flag | 03 August 2022, 22:21:53 UTC |
| f18d730 | Linus Torvalds | 03 August 2022, 22:16:49 UTC | Merge tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap updates from Darrick Wong: "The most notable change in this first batch is that we no longer schedule pages beyond i_size for writeback, preferring instead to let truncate deal with those pages. Next week, there may be a second pull request to remove iomap_writepage from the other two filesystems (gfs2/zonefs) that use iomap for buffered IO. This follows in the same vein as the recent removal of writepage from XFS, since it hasn't been triggered in a few years; it does nothing during direct reclaim; and as far as the people who examined the patchset can tell, it's moving the codebase in the right direction. However, as it was a late addition to for-next, I'm holding off on that section for another week of testing to see if anyone can come up with a solid reason for holding off in the meantime. Summary: - Skip writeback for pages that are completely beyond EOF - Minor code cleanups" * tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: dax: set did_zero to true when zeroing successfully iomap: set did_zero to true when zeroing successfully iomap: skip pages past eof in iomap_do_writepage() | 03 August 2022, 22:16:49 UTC |
| 2e4f8c7 | Linus Torvalds | 03 August 2022, 22:12:40 UTC | Merge tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fix from David Sterba: "One update to AFFS, switching away from the kmap/kmap_atomic API" * tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: use memcpy_to_page and remove replace kmap_atomic() | 03 August 2022, 22:13:43 UTC |
| 353767e | Linus Torvalds | 03 August 2022, 21:54:52 UTC | Merge tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "This brings some long awaited changes, the send protocol bump, otherwise lots of small improvements and fixes. The main core part is reworking bio handling, cleaning up the submission and endio and improving error handling. There are some changes outside of btrfs adding helpers or updating API, listed at the end of the changelog. Features: - sysfs: - export chunk size, in debug mode add tunable for setting its size - show zoned among features (was only in debug mode) - show commit stats (number, last/max/total duration) - send protocol updated to 2 - new commands: - ability write larger data chunks than 64K - send raw compressed extents (uses the encoded data ioctls), ie. no decompression on send side, no compression needed on receive side if supported - send 'otime' (inode creation time) among other timestamps - send file attributes (a.k.a file flags and xflags) - this is first version bump, backward compatibility on send and receive side is provided - there are still some known and wanted commands that will be implemented in the near future, another version bump will be needed, however we want to minimize that to avoid causing usability issues - print checksum type and implementation at mount time - don't print some messages at mount (mentioned as people asked about it), we want to print messages namely for new features so let's make some space for that - big metadata - this has been supported for a long time and is not a feature that's worth mentioning - skinny metadata - same reason, set by default by mkfs Performance improvements: - reduced amount of reserved metadata for delayed items - when inserted items can be batched into one leaf - when deleting batched directory index items - when deleting delayed items used for deletion - overall improved count of files/sec, decreased subvolume lock contention - metadata item access bounds checker micro-optimized, with a few percent of improved runtime for metadata-heavy operations - increase direct io limit for read to 256 sectors, improved throughput by 3x on sample workload Notable fixes: - raid56 - reduce parity writes, skip sectors of stripe when there are no data updates - restore reading from on-disk data instead of using stripe cache, this reduces chances to damage correct data due to RMW cycle - refuse to replay log with unknown incompat read-only feature bit set - zoned - fix page locking when COW fails in the middle of allocation - improved tracking of active zones, ZNS drives may limit the number and there are ENOSPC errors due to that limit and not actual lack of space - adjust maximum extent size for zone append so it does not cause late ENOSPC due to underreservation - mirror reading error messages show the mirror number - don't fallback to buffered IO for NOWAIT direct IO writes, we don't have the NOWAIT semantics for buffered io yet - send, fix sending link commands for existing file paths when there are deleted and created hardlinks for same files - repair all mirrors for profiles with more than 1 copy (raid1c34) - fix repair of compressed extents, unify where error detection and repair happen Core changes: - bio completion cleanups - don't double defer compression bios - simplify endio workqueues - add more data to btrfs_bio to avoid allocation for read requests - rework bio error handling so it's same what block layer does, the submission works and errors are consumed in endio - when asynchronous bio offload fails fall back to synchronous checksum calculation to avoid errors under writeback or memory pressure - new trace points - raid56 events - ordered extent operations - super block log_root_transid deprecated (never used) - mixed_backref and big_metadata sysfs feature files removed, they've been default for sufficiently long time, there are no known users and mixed_backref could be confused with mixed_groups Non-btrfs changes, API updates: - minor highmem API update to cover const arguments - switch all kmap/kmap_atomic to kmap_local - remove redundant flush_dcache_page() - address_space_operations::writepage callback removed - add bdev_max_segments() helper" * tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits) btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read btrfs: fix repair of compressed extents btrfs: remove the start argument to check_data_csum and export btrfs: pass a btrfs_bio to btrfs_repair_one_sector btrfs: simplify the pending I/O counting in struct compressed_bio btrfs: repair all known bad mirrors btrfs: merge btrfs_dev_stat_print_on_error with its only caller btrfs: join running log transaction when logging new name btrfs: simplify error handling in btrfs_lookup_dentry btrfs: send: always use the rbtree based inode ref management infrastructure btrfs: send: fix sending link commands for existing file paths btrfs: send: introduce recorded_ref_alloc and recorded_ref_free btrfs: zoned: wait until zone is finished when allocation didn't progress btrfs: zoned: write out partially allocated region btrfs: zoned: activate necessary block group btrfs: zoned: activate metadata block group on flush_space btrfs: zoned: disable metadata overcommit for zoned btrfs: zoned: introduce space_info->active_total_bytes btrfs: zoned: finish least available block group on data bg allocation btrfs: let can_allocate_chunk return error ... | 03 August 2022, 21:54:52 UTC |
| ab17c0c | Linus Torvalds | 03 August 2022, 21:41:36 UTC | Merge tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull efivars sysfs interface removal from Ard Biesheuvel: "Remove the obsolete 'efivars' sysfs based interface to the EFI variable store, now that all users have moved to the efivarfs pseudo file system, which was created ~10 years ago to address some fundamental shortcomings in the sysfs based driver. Move the 'business logic' related to which EFI variables are important and may affect the boot flow from the efivars support layer into the efivarfs pseudo file system, so it is no longer exposed to other parts of the kernel" * tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: vars: Move efivar caching layer into efivarfs efi: vars: Switch to new wrapper layer efi: vars: Remove deprecated 'efivars' sysfs interface | 03 August 2022, 21:41:36 UTC |
| 97a77ab | Linus Torvalds | 03 August 2022, 21:38:02 UTC | Merge tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: - Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 * tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) ACPI: Move PRM config option under the main ACPI config ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64 ACPI: PRM: Change handler_addr type to void pointer efi: Simplify arch_efi_call_virt() macro drivers: fix typo in firmware/efi/memmap.c efi: vars: Drop __efivar_entry_iter() helper which is no longer used efi: vars: Use locking version to iterate over efivars linked lists efi: pstore: Omit efivars caching EFI varstore access layer efi: vars: Add thin wrapper around EFI get/set variable interface efi: vars: Don't drop lock in the middle of efivar_init() pstore: Add priv field to pstore_record for backend specific use Input: applespi - avoid efivars API and invoke EFI services directly selftests/kexec: remove broken EFI_VARS secure boot fallback check brcmfmac: Switch to appropriate helper to load EFI variable contents iwlwifi: Switch to proper EFI variable store interface media: atomisp_gmin_platform: stop abusing efivar API efi: efibc: avoid efivar API for setting variables efi: avoid efivars layer when loading SSDTs from variables efi: Correct comment on efi_memmap_alloc memblock: Disable mirror feature if kernelcore is not specified ... | 03 August 2022, 21:38:02 UTC |
| ff89dd0 | Linus Torvalds | 03 August 2022, 21:03:51 UTC | Merge tag 'pull-work.9p' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p iov_iter fix from Al Viro: "net/9p abuses iov_iter primitives - it attempts to copy _from_ a destination-only iov_iter when it handles Rerror arriving in reply to zero-copy request. Not hard to fix, fortunately. This is a prereq for the iov_iter_get_pages() work in the second part of iov_iter series, ended up in a separate branch" * tag 'pull-work.9p' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: handling Rerror without copy_from_iter_full() | 03 August 2022, 21:03:51 UTC |
| d9b58ab | Linus Torvalds | 03 August 2022, 20:59:15 UTC | Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull copy_to_iter_mc fix from Al Viro: "Backportable fix for copy_to_iter_mc() - the second part of iov_iter work will pretty much overwrite this, but would be much harder to backport" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix short copy handling in copy_mc_pipe_to_iter() | 03 August 2022, 20:59:15 UTC |
