| 37b9a26 | David S. Miller | 30 September 2014, 20:22:51 UTC | Merge branch 'netxen' Manish Chopra says: ==================== netxen: Bug fixes. This series fixes some TX specific issues. * Move spin_lock(tx_clean_lock) in down path to fix atomic sleep bug (Reported by Mike Galbraith). * Fix hang in interface down while running traffic. Please consider applying this to 'net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 30 September 2014, 20:22:51 UTC |
| 9295f94 | Manish Chopra | 30 September 2014, 07:56:36 UTC | netxen: Fix bug in Tx completion path. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Due to this interface down path gets stuck forever waiting for NAPI to complete. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 September 2014, 20:22:44 UTC |
| 0d36882 | Manish Chopra | 30 September 2014, 07:56:35 UTC | netxen: Fix BUG "sleeping function called from invalid context" o __netxen_nic_down() function might sleep while holding spinlock_t(tx_clean_lock). Acquire this lock for only releasing TX buffers instead of taking it for whole down path. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 September 2014, 20:22:43 UTC |
| 705f1c8 | Hannes Frederic Sowa | 27 September 2014, 22:46:06 UTC | ipv6: remove rt6i_genid Eric Dumazet noticed that all no-nonexthop or no-gateway routes which are already marked DST_HOST (e.g. input routes routes) will always be invalidated during sk_dst_check. Thus per-socket dst caching absolutely had no effect and early demuxing had no effect. Thus this patch removes rt6i_genid: fn_sernum already gets modified during add operations, so we only must ensure we mutate fn_sernum during ipv6 address remove operations. This is a fairly cost extensive operations, but address removal should not happen that often. Also our mtu update functions do the same and we heard no complains so far. xfrm policy changes also cause a call into fib6_flush_trees. Also plug a hole in rt6_info (no cacheline changes). I verified via tracing that this change has effect. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 September 2014, 18:00:48 UTC |
| dedb845 | KY Srinivasan | 29 September 2014, 05:16:43 UTC | hyperv: Fix a bug in netvsc_start_xmit() After the packet is successfully sent, we should not touch the skb as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. In this version of the patch I have fixed issues pointed out by David. David, please queue this up for stable. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 September 2014, 05:21:03 UTC |
| c5bb86c | Kweh, Hock Leong | 26 September 2014, 13:42:55 UTC | net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected When the CONFIG_HAVE_CLK is selected for the system, the stmmac_pci_probe will fail with dmesg: [ 2.167225] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002) [ 2.178267] stmmaceth 0000:00:14.6: enabling bus mastering [ 2.178436] stmmaceth 0000:00:14.6: irq 24 for MSI/MSI-X [ 2.178703] stmmaceth 0000:00:14.6: stmmac_dvr_probe: warning: cannot get CSR clock [ 2.186503] stmmac_pci_probe: main driver probe failed [ 2.194003] stmmaceth 0000:00:14.6: disabling bus mastering [ 2.196473] stmmaceth: probe of 0000:00:14.6 failed with error -2 This patch fix the issue by breaking the dependency to devm_clk_get() as the CSR clock can be obtained at priv->plat->clk_csr from pci driver. Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2014, 20:36:58 UTC |
| 17c9c82 | Ignacy Gawędzki | 24 September 2014, 16:38:39 UTC | ematch: Fix matching of inverted containers. Negated expressions and sub-expressions need to have their flags checked for TCF_EM_INVERT and their result negated accordingly. Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2014, 19:31:29 UTC |
| 73d3fe6 | Eric Dumazet | 29 September 2014, 17:34:29 UTC | gro: fix aggregation for skb using frag_list In commit 8a29111c7ca6 ("net: gro: allow to build full sized skb") I added a regression for linear skb that traditionally force GRO to use the frag_list fallback. Erez Shitrit found that at most two segments were aggregated and the "if (skb_gro_len(p) != pinfo->gso_size)" test was failing. This is because pinfo at this spot still points to the last skb in the chain, instead of the first one, where we find the correct gso_size information. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 8a29111c7ca6 ("net: gro: allow to build full sized skb") Reported-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 September 2014, 19:17:59 UTC |
| 2c1a431 | WANG Cong | 25 September 2014, 00:07:53 UTC | neigh: check error pointer instead of NULL for ipv4_neigh_lookup() Fixes: commit f187bc6efb7250afee0e2009b6106 ("ipv4: No need to set generic neighbour pointer") Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2014, 21:16:04 UTC |
| 86fa9c4 | David S. Miller | 28 September 2014, 20:19:52 UTC | Merge branch 'ipv6_tunnel' Steffen Klassert says: ==================== ipv6: Return an error when adding an already existing tunnel The ipv6 tunnel locate functions should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. All our ipv6 tunnels have this bug from the very beginning. Only the sit tunnel was fixed some years ago with: commit 8db99e57175 ("sit: Fail to create tunnel, if it already exists"). This patchset fixes the remaining ipv6 tunnels. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2014, 20:19:52 UTC |
| cd0a0bd | Steffen Klassert | 22 September 2014, 08:07:26 UTC | ip6_gre: Return an error when adding an existing tunnel. ip6gre_tunnel_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2014, 20:19:46 UTC |
| d814b84 | Steffen Klassert | 22 September 2014, 08:07:25 UTC | ip6_vti: Return an error when adding an existing tunnel. vti6_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2014, 20:19:46 UTC |
| 2b0bb01 | Steffen Klassert | 22 September 2014, 08:07:24 UTC | ip6_tunnel: Return an error when adding an existing tunnel. ip6_tnl_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2014, 20:19:46 UTC |
| 5a4ee9a | Nicolas Dichtel | 24 September 2014, 09:03:00 UTC | ip6gre: add a rtnl link alias for ip6gretap With this alias, we don't need to load manually the module before adding an ip6gretap interface with iproute2. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 21:15:57 UTC |
| effa4bc | Matan Barak | 23 September 2014, 13:05:59 UTC | net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 20:43:23 UTC |
| e7af85d | David S. Miller | 26 September 2014, 20:21:29 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== nf pull request for net This series contains netfilter fixes for net, they are: 1) Fix lockdep splat in nft_hash when releasing sets from the rcu_callback context. We don't the mutex there anymore. 2) Remove unnecessary spinlock_bh in the destroy path of the nf_tables rbtree set type from rcu_callback context. 3) Fix another lockdep splat in rhashtable. None of the callers hold a mutex when calling rhashtable_destroy. 4) Fix duplicated error reporting from nfnetlink when aborting and replaying a batch. 5) Fix a Kconfig issue reported by kbuild robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 20:21:29 UTC |
| 445f7f4 | hayeswang | 23 September 2014, 08:31:47 UTC | r8152: fix the carrier off when autoresuming netif_carrier_off would be called when autoresuming, even though the cable is plugged. This causes some applications do relative actions when detecting the carrier off. Keep the status of the carrier, and let it be modified when the linking change occurs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 20:13:17 UTC |
| 9026968 | Soren Brinkmann | 22 September 2014, 23:49:08 UTC | Revert "net/macb: add pinctrl consumer support" This reverts commit 8ef29f8aae524bd51298fb10ac6a5ce6c4c5a3d8. The driver core already calls pinctrl_get() and claims the default state. There is no need to replicate this in the driver. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:48:37 UTC |
| 40b8fe4 | Vlad Yasevich | 22 September 2014, 20:34:17 UTC | macvtap: Fix race between device delete and open. In macvtap device delete and open calls can race and this causes a list curruption of the vlan queue_list. The race intself is triggered by the idr accessors that located the vlan device. The device is stored into and removed from the idr under both an rtnl and a mutex. However, when attempting to locate the device in idr, only a mutex is taken. As a result, once cpu perfoming a delete may take an rtnl and wait for the mutex, while another cput doing an open() will take the idr mutex first to fetch the device pointer and later take an rtnl to add a queue for the device which may have just gotten deleted. With this patch, we now hold the rtnl for the duration of the macvtap_open() call thus making sure that open will not race with delete. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:20:26 UTC |
| 2b07f0d | David S. Miller | 26 September 2014, 19:11:37 UTC | Merge branch 'qlcnic' Manish Chopra says: ==================== qlcnic: Bug fixes. This patch series contains following bug fixes: * Fixes related to ethtool statistics. * Fix for flash read related API. Please apply this series to 'net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:11:37 UTC |
| 3456399 | Manish Chopra | 22 September 2014, 09:51:53 UTC | qlcnic: Fix ordering of stats in stats buffer. o When TX queues are not allocated, driver does not fill TX queues stats in the buffer. However, it is also not advancing data pointer by TX queue stats length, which would misplace all successive stats data in the buffer and will result in mismatch between stats strings and it's values. o Fix this by advancing data pointer by TX queue stats length when queues are not allocated. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:11:31 UTC |
| 6c0fd0d | Manish Chopra | 22 September 2014, 09:51:52 UTC | qlcnic: Remove __QLCNIC_DEV_UP bit check to read TX queues statistics. o TX queues stats must be read when queues are allocated regardless of interface is up or not. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:11:31 UTC |
| c023030 | Manish Chopra | 22 September 2014, 09:51:51 UTC | qlcnic: Fix memory corruption while reading stats using ethtool. o Driver is doing memset with zero for total number of stats bytes when it has already filled some data in the stats buffer, which can overwrite memory area beyond the length of stats buffer. o Fix this by initializing stats buffer with zero before filling any data in it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:11:31 UTC |
| 4324414 | Sony Chacko | 22 September 2014, 09:51:50 UTC | qlcnic: Use qlcnic_83xx_flash_read32() API instead of lockless version of the API. In qlcnic_83xx_setup_idc_parameters() routine use qlcnic_83xx_flash_read32() API which takes flash lock internally instead of the lockless version qlcnic_83xx_lockless_flash_read32(). Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 19:11:31 UTC |
| d61746b | Steffen Klassert | 22 September 2014, 07:11:08 UTC | ip_tunnel: Don't allow to add the same tunnel multiple times. When we try to add an already existing tunnel, we don't return an error. Instead we continue and call ip_tunnel_update(). This means that we can change existing tunnels by adding the same tunnel multiple times. It is even possible to change the tunnel endpoints of the fallback device. We fix this by returning an error if we try to add an existing tunnel. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 September 2014, 04:41:30 UTC |
| b94d525 | Linus Torvalds | 24 September 2014, 19:45:24 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Here is a quick pull request primarily meant to address the deconfig fallout from changing SCSI_NETLINK from being used via 'select' to being used via 'depends'. I applied a set of 5 patches written by Michal Marek, and then I carefully audited all of the remaining config files, basically: 1) I scanned every arch config file, and if it mentioned CONFIG_INET or CONFIG_UNIX, I made sure it had CONFIG_NET=y 2) After that, I scanned every arch config file, and if it did not have CONFIG_NET=y I made sure it did not reference any networking config options. Finally, we have some late breaking wireless fixes in here from John Linville and co" [ And there's a sparc bpf fix snuck in too ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sparc: bpf_jit: fix loads from negative offsets parisc: Update defconfigs which were missing CONFIG_NET. powerpc: Update defconfigs which were missing CONFIG_NET. s390: Update defconfigs which were missing CONFIG_NET. mips: Update some more defconfigs which were missing CONFIG_NET. sparc: Set CONFIG_NET=y in defconfigs sh: Set CONFIG_NET=y in defconfigs powerpc: Set CONFIG_NET=y in defconfigs parisc: Set CONFIG_NET=y in defconfigs mips: Set CONFIG_NET=y in defconfigs brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() ath9k: Fix NULL pointer dereference on early irq net: rfkill: gpio: Fix clock status NFC: st21nfca: Fix potential depmod dependency cycle NFC: st21nfcb: Fix depmod dependency cycle NFC: microread: Potential overflows in microread_target_discovered() | 24 September 2014, 19:45:24 UTC |
| 35607b0 | Alexei Starovoitov | 23 September 2014, 20:50:10 UTC | sparc: bpf_jit: fix loads from negative offsets - fix BPF_LD|ABS|IND from negative offsets: make sure to sign extend lower 32 bits in 64-bit register before calling C helpers from JITed code, otherwise 'int k' argument of bpf_internal_load_pointer_neg_helper() function will be added as large unsigned integer, causing packet size check to trigger and abort the program. It's worth noting that JITed code for 'A = A op K' will affect upper 32 bits differently depending whether K is simm13 or not. Since small constants are sign extended, whereas large constants are stored in temp register and zero extended. That is ok and we don't have to pay a penalty of sign extension for every sethi, since all classic BPF instructions have 32-bit semantics and we only need to set correct upper bits when transitioning from JITed code into C. - though instructions 'A &= 0' and 'A *= 0' are odd, JIT compiler should not optimize them out Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 19:04:07 UTC |
| 543a2df | David S. Miller | 24 September 2014, 19:00:12 UTC | Merge tag 'master-2014-09-23' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-23 Please consider pulling this one last batch of fixes intended for the 3.17 stream! For the NFC bits, Samuel says: "Hopefully not too late for a handful of NFC fixes: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." On top of that... Emil Goode provides a fix for a brcmfmac off-by-one regression which was introduced in the 3.17 cycle. Loic Poulain fixes a polarity mismatch for a variable assignment inside of rfkill-gpio. Wojciech Dubowik prevents a NULL pointer dereference in ath9k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 19:00:12 UTC |
| c899c3f | David S. Miller | 24 September 2014, 17:53:53 UTC | parisc: Update defconfigs which were missing CONFIG_NET. Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 18:34:29 UTC |
| 95d7799 | David S. Miller | 24 September 2014, 17:53:43 UTC | powerpc: Update defconfigs which were missing CONFIG_NET. Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 18:34:29 UTC |
| ff408ba | David S. Miller | 24 September 2014, 17:44:32 UTC | s390: Update defconfigs which were missing CONFIG_NET. Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 18:34:20 UTC |
| af4de1b | David S. Miller | 24 September 2014, 17:44:16 UTC | mips: Update some more defconfigs which were missing CONFIG_NET. Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:44:16 UTC |
| 1ab0b8b | Michal Marek | 23 September 2014, 15:44:04 UTC | sparc: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: sparclinux@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:38:30 UTC |
| 925f7fa | Michal Marek | 23 September 2014, 15:44:03 UTC | sh: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-sh@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:38:30 UTC |
| 853e3e1 | Michal Marek | 23 September 2014, 15:44:02 UTC | powerpc: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:38:29 UTC |
| 25fee47 | Michal Marek | 23 September 2014, 15:44:01 UTC | parisc: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-parisc@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:38:29 UTC |
| d1630f9 | Michal Marek | 23 September 2014, 15:44:00 UTC | mips: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-mips@linux-mips.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2014, 17:38:29 UTC |
| 02f130a | Linus Torvalds | 24 September 2014, 16:51:50 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull one last block fix from Jens Axboe: "We've had an issue with scsi-mq where probing takes forever. This was bisected down to the percpu changes for blk_mq_queue_enter(), and the fact we now suffer an RCU grace period when killing a queue. SCSI creates and destroys tons of queues, so this let to 10s of seconds of stalls at boot for some. Tejun has a real fix for this, but it's too involved for 3.17. So this is a temporary workaround to expedite the queue killing until we can fold in the real fix for 3.18 when that merge window opens" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe | 24 September 2014, 16:51:50 UTC |
| 2d7ed01 | Linus Torvalds | 24 September 2014, 16:46:29 UTC | Merge tag 'pci-v3.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes that should be in v3.17. - Reverting "Don't scan random busses" covers up a CardBus regression having to do with allocating CardBus bus numbers. - Reverting "Make sure bus numbers stay within parents bounds" covers up an ACPI _CRS bug that makes us reconfigure a bridge, causing a broken device behind it to stop responding. - The pciehp timeout change fixes some code we added in v3.17. Without the fix, we can send a new hotplug command too early, before the timeout has expired. I hope for better fixes for the reverts, but those will have to come after v3.17" * tag 'pci-v3.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Fix pcie_wait_cmd() timeout Revert "PCI: Make sure bus number resources stay within their parents bounds" Revert "PCI: Don't scan random busses in pci_scan_bridge()" | 24 September 2014, 16:46:29 UTC |
| 2368a94 | Linus Torvalds | 24 September 2014, 16:37:35 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes three issues: - if ccp is loaded on a machine without ccp, it will incorrectly activate causing all requests to fail. Fixed by preventing ccp from loading if hardware isn't available. - not all IRQs were enabled for the qat driver, leading to potential stalls when it is used - disabled buggy AVX CTR implementation in aesni" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni - disable "by8" AVX CTR optimization crypto: ccp - Check for CCP before registering crypto algs crypto: qat - Enable all 32 IRQs | 24 September 2014, 16:37:35 UTC |
| eb55a2a | Linus Torvalds | 24 September 2014, 16:03:43 UTC | Merge tag 'media/v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For some last time fixes: - a regression detected on Kernel 3.16 related to VBI Teletext application breakage on drivers using videobuf2 (see https://bugzilla.kernel.org/show_bug.cgi?id=84401). The bug was noticed on saa7134 (migrated to VB2 on 3.16), but also affects em28xx (migrated on 3.9 to VB2); - two additional sanity checks at videobuf2; - two fixups to restore proper VBI support at the em28xx driver; - two Kernel oops fixups (at cx24123 and cx2341x drivers); - a bug at adv7604 where an if was doing just the opposite as it would be expected; - some documentation fixups to match the behavior defined at the Kernel" * tag 'media/v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2" [media] em28xx: fix VBI handling logic [media] DocBook media: improve the poll() documentation [media] DocBook media: fix the poll() 'no QBUF' documentation [media] vb2: fix VBI/poll regression [media] cx2341x: fix kernel oops [media] cx24123: fix kernel oops due to missing parent pointer [media] adv7604: fix inverted condition [media] media/radio: fix radio-miropcm20.c build with io.h header file [media] vb2: fix plane index sanity check in vb2_plane_cookie() [media] DocBook media: update version number and V4L2 changes [media] DocBook media: fix fieldname in struct v4l2_subdev_selection [media] vb2: fix vb2 state check when start_streaming fails [media] videobuf2-core.h: fix comment [media] videobuf2-core: add comments before the WARN_ON [media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pages | 24 September 2014, 16:03:43 UTC |
| a90e41e | Linus Torvalds | 24 September 2014, 15:53:33 UTC | Merge tag 'md/3.17-more-fixes' of git://git.neil.brown.name/md Pull bugfixes for md/raid1 from Neil Brown: "It is amazing how much easier it is to find bugs when you know one is there. Two bug reports resulted in finding 7 bugs! All are tagged for -stable. Those that can't cause (rare) data corruption, cause lockups. Particularly, but not only, fixing new "resync" code" * tag 'md/3.17-more-fixes' of git://git.neil.brown.name/md: md/raid1: fix_read_error should act on all non-faulty devices. md/raid1: count resync requests in nr_pending. md/raid1: update next_resync under resync_lock. md/raid1: Don't use next_resync to determine how far resync has progressed md/raid1: make sure resync waits for conflicting writes to complete. md/raid1: clean up request counts properly in close_sync() md/raid1: be more cautious where we read-balance during resync. md/raid1: intialise start_next_window for READ case to avoid hang | 24 September 2014, 15:53:33 UTC |
| 0a30288 | Tejun Heo | 23 September 2014, 19:24:32 UTC | blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take more than ten seconds when scsi-mq is used. This will be properly fixed by implementing a mechanism to keep q->mq_usage_counter in atomic mode till genhd registration; however, that involves rather big updates to percpu_ref which is difficult to apply late in the devel cycle (v3.17-rc6 at the moment). As a stop-gap measure till the proper fix can be implemented in the next cycle, this patch introduces __percpu_ref_kill_expedited() and makes blk_mq_freeze_queue() use it. This is heavy-handed but should work for testing the experimental SCSI blk-mq implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Cc: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> | 24 September 2014, 14:29:36 UTC |
| 7da4b29 | Mathias Krause | 23 September 2014, 20:31:07 UTC | crypto: aesni - disable "by8" AVX CTR optimization The "by8" implementation introduced in commit 22cddcc7df8f ("crypto: aes - AES CTR x86_64 "by8" AVX optimization") is failing crypto tests as it handles counter block overflows differently. It only accounts the right most 32 bit as a counter -- not the whole block as all other implementations do. This makes it fail the cryptomgr test #4 that specifically tests this corner case. As we're quite late in the release cycle, just disable the "by8" variant for now. Reported-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 24 September 2014, 13:15:31 UTC |
| c9f21cb | Tom Lendacky | 05 September 2014, 15:31:09 UTC | crypto: ccp - Check for CCP before registering crypto algs If the ccp is built as a built-in module, then ccp-crypto (whether built as a module or a built-in module) will be able to load and it will register its crypto algorithms. If the system does not have a CCP this will result in -ENODEV being returned whenever a command is attempted to be queued by the registered crypto algorithms. Add an API, ccp_present(), that checks for the presence of a CCP on the system. The ccp-crypto module can use this to determine if it should register it's crypto alogorithms. Cc: stable@vger.kernel.org Reported-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 24 September 2014, 06:23:34 UTC |
| 452b636 | Linus Torvalds | 23 September 2014, 23:47:34 UTC | Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ... | 23 September 2014, 23:47:34 UTC |
| ffd4341 | Linus Torvalds | 23 September 2014, 21:47:11 UTC | Merge tag 'sound-3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "One fix is about a buggy computation in PCM API function Clemens spotted out, but the impact must be really small as no one really uses it in user-space side. The rest are a trivial fix for a HD-audio model and a USB-audio device-specific regression fix, so all look fairly safe to apply" * tag 'sound-3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb-caiaq: Fix LED commands for Kore controller ALSA: pcm: fix fifo_size frame calculation ALSA: hda - Add fixup model name lookup for Lemote A1205 | 23 September 2014, 21:47:11 UTC |
| 31f9bf4 | Linus Torvalds | 23 September 2014, 21:45:09 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull final block fixes from Jens Axboe: "This week and last we've been fixing some corner cases related to blk-mq, mostly. I ended up pulling most of that out of for-linus yesterday, which is why the branch looks fresh. The rest were postponed for 3.18. This pull request contains: - Fix from Christoph, avoiding a stack overflow when FUA insertion would recursive infinitely. - Fix from David Hildenbrand on races between the timeout handler and uninitialized requests. Fixes a real issue that virtio_blk has run into. - A few fixes from me: - Ensure that request deadline/timeout is ordered before the request is marked as started. - A potential oops on out-of-memory, when we scale the queue depth of the device and retry. - A hang fix on requeue from SCSI, where the hardware queue would be stopped when we attempt to re-run it (and hence nothing would happen, stalling progress). - A fix for commit 2da78092, where the cleanup path was moved to RCU, but a debug might_sleep() was inadvertently left in the code. This causes warnings for people" * 'for-linus' of git://git.kernel.dk/linux-block: genhd: fix leftover might_sleep() in blk_free_devt() blk-mq: use blk_mq_start_hw_queues() when running requeue work blk-mq: fix potential oops on out-of-memory in __blk_mq_alloc_rq_maps() blk-mq: avoid infinite recursion with the FUA flag blk-mq: Avoid race condition with uninitialized requests blk-mq: request deadline must be visible before marking rq as started | 23 September 2014, 21:45:09 UTC |
| d19eff3 | Linus Torvalds | 23 September 2014, 21:05:32 UTC | Merge branch 'parisc-3.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "We avoid using -mfast-indirect-calls for 64bit kernel builds to prevent building an unbootable kernel due to latest gcc changes. In the pdc_stable/firmware-access driver we fix a few possible stack overflows and we now call secure_computing_strict() instead of secure_computing() which fixes upcoming SECCOMP patches in the for-next trees" * 'parisc-3.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds parisc: pdc_stable.c: Avoid potential stack overflows parisc: pdc_stable.c: Cleaning up unnecessary use of memset in conjunction with strncpy parisc: ptrace: use secure_computing_strict() | 23 September 2014, 21:05:32 UTC |
| d26a773 | John David Anglin | 23 September 2014, 00:54:50 UTC | parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds In spite of what the GCC manual says, the -mfast-indirect-calls has never been supported in the 64-bit parisc compiler. Indirect calls have always been done using function descriptors irrespective of the -mfast-indirect-calls option. Recently, it was noticed that a function descriptor was always requested when the -mfast-indirect-calls option was specified. This caused problems when the option was used in application code and doesn't make any sense because the whole point of the option is to avoid using a function descriptor for indirect calls. Fixing this broke 64-bit kernel builds. I will fix GCC but for now we need the attached change. This results in the same kernel code as before. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.0+ Signed-off-by: Helge Deller <deller@gmx.de> | 23 September 2014, 19:38:26 UTC |
| f0eb4a2 | Linus Torvalds | 23 September 2014, 19:10:48 UTC | Merge tag 'please-pull-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 defconfig update from Tony Luck: "Need to rebuild defconfig files to cope with removal of "select NET" in drivers/scsi/Kconfig" * tag 'please-pull-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] refresh arch/ia64/configs/* using "make savedefconfig" | 23 September 2014, 19:10:48 UTC |
| c1d5865 | Linus Torvalds | 23 September 2014, 18:53:28 UTC | Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix a resource leak in tmp103 driver - Add support for two more processors to fam15h_power driver - Also fix a bug in the same driver to only report the power level on chips which actually support reporting it * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tmp103) Fix resource leak bug in tmp103 temperature sensor driver hwmon: (fam15h_power) Add support for two more processors hwmon: (fam15h_power) Make actual power reporting conditional | 23 September 2014, 18:53:28 UTC |
| e8ee39e | Tony Luck | 22 September 2014, 16:35:11 UTC | [IA64] refresh arch/ia64/configs/* using "make savedefconfig" Prompted by a change to drivers/scsi/Kconfig which used to do a "select NET" but now does a "depends on NET". This meant that some configurations ended up without CONFIG_NET=y Signed-off-by Tony Luck <tony.luck@intel.com> | 23 September 2014, 18:09:29 UTC |
| 6cd2f85 | Linus Torvalds | 23 September 2014, 16:13:43 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull another kvm fix from Paolo Bonzini: "Another fix for 3.17 arrived at just the wrong time, after I had sent yesterday's pull request. Normally I would have waited for some other patches to pile up, but since 3.17 might be short here it is" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Fix unaligned access bug on gicv2 access | 23 September 2014, 16:13:43 UTC |
| 324c7b6 | Linus Torvalds | 23 September 2014, 16:06:18 UTC | Merge branch 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "One late fix for cgroup. I was waiting for another set of fixes for a long-standing obscure cpuset bug but am not sure whether they'll be ready before v3.17 release. This one is a simple fix for a mutex unlock balance bug in an allocation failure path in pidlist_array_load(). The bug was introduced in v3.14 and the fix is tagged for -stable" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix unbalanced locking | 23 September 2014, 16:06:18 UTC |
| f8adaf0 | Emil Goode | 22 September 2014, 22:49:55 UTC | brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() In the brcmf_count_20mhz_channels function we are looping through a list of channels received from firmware. Since the index of the first channel is 0 the condition leads to an off by one bug. This is causing us to hit the WARN_ON_ONCE(1) calls in the brcmu_d11n_decchspec function, which is how I discovered the bug. Introduced by: commit b48d891676f756d48b4d0ee131e4a7a5d43ca417 ("brcmfmac: rework wiphy structure setup") Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 23 September 2014, 14:48:26 UTC |
| 9542639 | Paolo Bonzini | 23 September 2014, 13:18:02 UTC | Merge tag 'kvm-arm-for-v3.17-rc7-or-final' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master Fixes unaligned access to the gicv2 virtual cpu status. | 23 September 2014, 13:18:02 UTC |
| f367039 | Linus Torvalds | 23 September 2014, 06:05:49 UTC | Revert "x86/efi: Fixup GOT in all boot code paths" This reverts commit 9cb0e394234d244fe5a97e743ec9dd7ddff7e64b. It causes my Sony Vaio Pro 11 to immediately reboot at startup. Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 September 2014, 06:05:49 UTC |
| 7cbeb9f | Yinghai Lu | 23 September 2014, 02:05:45 UTC | PCI: pciehp: Fix pcie_wait_cmd() timeout pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs. Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> | 23 September 2014, 02:05:45 UTC |
| 98f75b8 | Linus Torvalds | 23 September 2014, 01:23:33 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) If the user gives us a msg_namelen of 0, don't try to interpret anything pointed to by msg_name. From Ani Sinha. 2) Fix some bnx2i/bnx2fc randconfig compilation errors. The gist of the issue is that we firstly have drivers that span both SCSI and networking. And at the top of that chain of dependencies we have things like SCSI_FC_ATTRS and SCSI_NETLINK which are selected. But since select is a sledgehammer and ignores dependencies, everything to select's SCSI_FC_ATTRS and/or SCSI_NETLINK has to also explicitly select their dependencies and so on and so forth. Generally speaking 'select' is supposed to only be used for child nodes, those which have no dependencies of their own. And this whole chain of dependencies in the scsi layer violates that rather strongly. So just make SCSI_NETLINK depend upon it's dependencies, and so on and so forth for the things selecting it (either directly or indirectly). From Anish Bhatt and Randy Dunlap. 3) Fix generation of blackhole routes in IPSEC, from Steffen Klassert. 4) Actually notice netdev feature changes in rtl_open() code, from Hayes Wang. 5) Fix divide by zero in bond enslaving, from Nikolay Aleksandrov. 6) Missing memory barrier in sunvnet driver, from David Stevens. 7) Don't leave anycast addresses around when ipv6 interface is destroyed, from Sabrina Dubroca. 8) Don't call efx_{arch}_filter_sync_rx_mode before addr_list_lock is initialized in SFC driver, from Edward Cree. 9) Fix missing DMA error checking in 3c59x, from Neal Horman. 10) Openvswitch doesn't emit OVS_FLOW_CMD_NEW notifications accidently, fix from Samuel Gauthier. 11) pch_gbe needs to select NET_PTP_CLASSIFY otherwise we can get a build error. 12) Fix macvlan regression wherein we stopped emitting broadcast/multicast frames over software devices. From Nicolas Dichtel. 13) Fix infiniband bug due to unintended overflow of skb->cb[], from Eric Dumazet. And add an assertion so this doesn't happen again. 14) dm9000_parse_dt() should return error pointers, not NULL. From Tobias Klauser. 15) IP tunneling code uses this_cpu_ptr() in preemptible contexts, fix from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma net: bcmgenet: fix TX reclaim accounting for fragments ipv4: do not use this_cpu_ptr() in preemptible context dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt() r8169: fix an if condition r8152: disable ALDPS ipoib: validate struct ipoib_cb size net: sched: shrink struct qdisc_skb_cb to 28 bytes tg3: Work around HW/FW limitations with vlan encapsulated frames macvlan: allow to enqueue broadcast pkt on virtual device pch_gbe: 'select' NET_PTP_CLASSIFY. scsi: Use 'depends' with LIBFC instead of 'select'. openvswitch: restore OVS_FLOW_CMD_NEW notifications genetlink: add function genl_has_listeners() lib: rhashtable: remove second linux/log2.h inclusion net: allow macvlans to move to net namespace 3c59x: Fix bad offset spec in skb_frag_dma_map 3c59x: Add dma error checking and recovery sparc: bpf_jit: fix support for ldx/stx mem and SKF_AD_VLAN_TAG can: at91_can: add missing prepare and unprepare of the clock ... | 23 September 2014, 01:23:33 UTC |
| 9478303 | Linus Torvalds | 23 September 2014, 01:18:55 UTC | Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux Pull clock layer fixes from Mike Turquette: "The fixes for the clock tree are mostly run-time bugs in clock drivers. The fixes for TI DRA7 remove divide-by-zero errors. The recently merged AT91 clock driver fixes some bad error checking and the QCOM driver fix restores audio for that platform, a clear regression. A list iteration bug in the framework core was hit recently and is fixed up here. Finally a compilation warning is fixed for efm32gg, which is also a regression fix" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk/efm32gg: fix dt init prototype clk: prevent erronous parsing of children during rate change clk: rockchip: Fix the clocks for i2c1 and i2c2 clk: qcom: Fix sdc 144kHz frequency entry clk: at91: fix num_parents test in at91sam9260 slow clk implementation clk: ti: dra7-atl: Provide error check for incoming parameters in set_rate clk: ti: divider: Provide error check for incoming parameters in set_rate | 23 September 2014, 01:18:55 UTC |
| e2519c2 | Linus Torvalds | 23 September 2014, 00:52:16 UTC | Merge tag 'fscache-fixes-20140917' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fs-cache fixes from David Howells: - Put a timeout in releasepage() to deal with a recursive hang between the memory allocator, writeback, ext4 and fscache under memory pressure. - Fix a pair of refcount bugs in the fscache error handling. - Remove a couple of unused pagevecs. - The cachefiles requirement that the base directory support rename should permit rename2 as an alternative - otherwise certain filesystems cannot now be used as backing stores (such as ext4). * tag 'fscache-fixes-20140917' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: CacheFiles: Handle rename2 cachefiles: remove two unused pagevecs. FS-Cache: refcount becomes corrupt under vma pressure. FS-Cache: Reduce cookie ref count if submit fails. FS-Cache: Timeout for releasepage() | 23 September 2014, 00:52:16 UTC |
| e18b7fa | David S. Miller | 22 September 2014, 22:38:53 UTC | Merge branch 'bcmgenet' Florian Fainelli says: ==================== net: bcmgenet: TX reclaim and DMA fixes This patch set contains one fix for an accounting problem while reclaiming transmitted buffers having fragments, and the second fix is to make sure that the DMA shutdown is properly controlled. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 22:38:53 UTC |
| 4a0c081 | Florian Fainelli | 22 September 2014, 18:54:43 UTC | net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma We should not be manipulaging the DMA_CTRL registers directly by writing 0 to them to disable DMA. This is an operation that needs to be timed to make sure the DMA engines have been properly stopped since their state machine stops on a packet boundary, not immediately. Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to ensure a proper DMA engine state. As a result, we need to reorder the function bodies to resolve the use dependency. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 22:38:40 UTC |
| 478a010 | Florian Fainelli | 22 September 2014, 18:54:42 UTC | net: bcmgenet: fix TX reclaim accounting for fragments The GENET driver supports SKB fragments, and succeeds in transmitting them properly, but when reclaiming these transmitted fragments, we will only update the count of free buffer descriptors by 1, even for SKBs with fragments. This leads to the networking stack thinking it has more room than the hardware has when pushing new SKBs, and backing off consequently because we return NETDEV_TX_BUSY. Fix this by accounting for the SKB nr_frags plus one (itself) and update ring->free_bds accordingly with that value for each iteration loop in __bcmgenet_tx_reclaim(). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 22:38:40 UTC |
| a35165c | Eric Dumazet | 22 September 2014, 17:38:16 UTC | ipv4: do not use this_cpu_ptr() in preemptible context this_cpu_ptr() in preemptible context is generally bad Sep 22 05:05:55 br kernel: [ 94.608310] BUG: using smp_processor_id() in preemptible [00000000] code: ip/2261 Sep 22 05:05:55 br kernel: [ 94.608316] caller is tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel] Sep 22 05:05:55 br kernel: [ 94.608319] CPU: 3 PID: 2261 Comm: ip Not tainted 3.17.0-rc5 #82 We can simply use raw_cpu_ptr(), as preemption is safe in these contexts. Should fix https://bugzilla.kernel.org/show_bug.cgi?id=84991 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Joe <joe9mail@gmail.com> Fixes: 9a4aa9af447f ("ipv4: Use percpu Cache route in IP tunnels") Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 22:31:18 UTC |
| 1f2bb4a | Christoffer Dall | 22 September 2014, 20:10:36 UTC | arm/arm64: KVM: Fix unaligned access bug on gicv2 access We were using an atomic bitop on the vgic_v2.vgic_elrsr field which was not aligned to the natural size on 64-bit platforms. This bug showed up after QEMU correctly identifies the pl011 line as being level-triggered, and not edge-triggered. These data structures are protected by a spinlock so simply use a non-atomic version of the accessor instead. Tested-by: Joel Schopp <joel.schopp@amd.com> Reported-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> | 22 September 2014, 21:05:56 UTC |
| 46f341f | Jens Axboe | 16 September 2014, 19:38:51 UTC | genhd: fix leftover might_sleep() in blk_free_devt() Commit 2da78092 changed the locking from a mutex to a spinlock, so we now longer sleep in this context. But there was a leftover might_sleep() in there, which now triggers since we do the final free from an RCU callback. Get rid of it. Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 20:45:45 UTC |
| 84de67b | David S. Miller | 22 September 2014, 20:41:41 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2014-09-22 We generate a blackhole or queueing route if a packet matches an IPsec policy but a state can't be resolved. Here we assume that dst_output() is called to kill these packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system without the necessary transformations. This pull request contains two patches to fix this issue: 1) Fix for blackhole routed packets. 2) Fix for queue routed packets. Both patches are serious stable candidates. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 20:41:41 UTC |
| 09f3756 | Tobias Klauser | 19 September 2014, 14:16:25 UTC | dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt() In one error condition dm9000_parse_dt() returns NULL, however the return value is checked using IS_ERR() in dm9000_probe(), leading to the error not being properly propagated if CONFIG_OF is not enabled or the device tree data is not available. Fix this by also returning an ERR_PTR() in this case. Fixes: 0b8bf1baabe5 (net: dm9000: Allow instantiation using device tree) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 20:02:34 UTC |
| 2ba7d14 | Wojciech Dubowik | 18 September 2014, 06:30:41 UTC | ath9k: Fix NULL pointer dereference on early irq The ah struct might not have been initialized when interrupt comes so check for it. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 22 September 2014, 20:02:15 UTC |
| fa5c107 | Loic Poulain | 16 September 2014, 12:53:58 UTC | net: rfkill: gpio: Fix clock status Clock is disabled when the device is blocked. So, clock_enabled is the logical negation of "blocked". Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 22 September 2014, 20:02:15 UTC |
| 5c244fa | John W. Linville | 22 September 2014, 19:57:46 UTC | Merge tag 'nfc-fixes-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.17 fixes We have 3 NFC fixes for 3.17: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." Signed-off-by: John W. Linville <linville@tuxdriver.com> | 22 September 2014, 19:57:46 UTC |
| 85911d7 | Dan Carpenter | 19 September 2014, 10:40:25 UTC | r8169: fix an if condition There is an extra semi-colon so __rtl8169_set_features() is called every time. Fixes: 929a031dfd62 ('r8169: adjust __rtl8169_set_features') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hayes Wang <hayeswang@realtek.com>-- Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 19:19:17 UTC |
| b0e2a55 | Linus Torvalds | 22 September 2014, 18:58:23 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Two very simple bugfixes, affecting all supported architectures" [ Two? There's three commits in here. Oh well, I guess Paolo didn't count the preparatory symbol export ] * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: correct null pid check in kvm_vcpu_yield_to() KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn() mm: export symbol dependencies of is_zero_pfn() | 22 September 2014, 18:58:23 UTC |
| d70b113 | hayeswang | 19 September 2014, 07:17:18 UTC | r8152: disable ALDPS If the hw is in ALDPS mode, the hw may have no response for accessing the most registers. Therefore, the ALDPS should be disabled before accessing the hw in rtl_ops.init(), rtl_ops.disable(), rtl_ops.up(), and rtl_ops.down(). Regardless of rtl_ops.enable(), because the hw wouldn't enter ALDPS mode when linking on. The hw would enter the ALDPS mode after several seconds when link down occurs and the ALDPS is enabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 18:54:19 UTC |
| b49fe36 | Eric Dumazet | 18 September 2014, 18:00:27 UTC | ipoib: validate struct ipoib_cb size To catch future errors sooner. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 18:29:55 UTC |
| 2571178 | Eric Dumazet | 18 September 2014, 15:02:05 UTC | net: sched: shrink struct qdisc_skb_cb to 28 bytes We cannot make struct qdisc_skb_cb bigger without impacting IPoIB, or increasing skb->cb[] size. Commit e0f31d849867 ("flow_keys: Record IP layer protocol in skb_flow_dissect()") broke IPoIB. Only current offender is sch_choke, and this one do not need an absolutely precise flow key. If we store 17 bytes of flow key, its more than enough. (Its the actual size of flow_keys if it was a packed structure, but we might add new fields at the end of it later) Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: e0f31d849867 ("flow_keys: Record IP layer protocol in skb_flow_dissect()") Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 18:21:47 UTC |
| 476c188 | Vlad Yasevich | 18 September 2014, 14:31:17 UTC | tg3: Work around HW/FW limitations with vlan encapsulated frames TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 18:20:23 UTC |
| 4e66cd1 | sundarjdev | 22 September 2014, 17:31:39 UTC | hwmon: (tmp103) Fix resource leak bug in tmp103 temperature sensor driver tmp103 temperature sensor driver registers with the hwmon framework by calling hwmon_device_register_with_groups but does not have a .remove method to call hwmon_device_unregister to unregister from the framework when the device is no longer needed. Fix this by calling devm_hwmon_device_register_with_groups. Signed-off-by: Sundar J Dev <sundarjayakumardev@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 22 September 2014, 18:11:48 UTC |
| 07d92d5 | Nicolas Dichtel | 17 September 2014, 08:08:08 UTC | macvlan: allow to enqueue broadcast pkt on virtual device Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 18:10:07 UTC |
| 8b95741 | Jens Axboe | 19 September 2014, 19:10:29 UTC | blk-mq: use blk_mq_start_hw_queues() when running requeue work When requests are retried due to hw or sw resource shortages, we often stop the associated hardware queue. So ensure that we restart the queues when running the requeue work, otherwise the queue run will be a no-op. Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 17:55:56 UTC |
| 6b55e1f | Jens Axboe | 19 September 2014, 14:04:53 UTC | blk-mq: fix potential oops on out-of-memory in __blk_mq_alloc_rq_maps() __blk_mq_alloc_rq_maps() can be invoked multiple times, if we scale back the queue depth if we are low on memory. So don't clear set->tags when we fail, this is handled directly in the parent function, blk_mq_alloc_tag_set(). Reported-by: Robert Elliott <Elliott@hp.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 17:55:23 UTC |
| a57a178 | Christoph Hellwig | 16 September 2014, 21:44:07 UTC | blk-mq: avoid infinite recursion with the FUA flag We should not insert requests into the flush state machine from blk_mq_insert_request. All incoming flush requests come through blk_{m,s}q_make_request and are handled there, while blk_execute_rq_nowait should only be called for BLOCK_PC requests. All other callers deal with requests that already went through the flush statemchine and shouldn't be reinserted into it. Reported-by: Robert Elliott <Elliott@hp.com> Debugged-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 17:55:19 UTC |
| 683d0e1 | David Hildenbrand | 18 September 2014, 09:04:31 UTC | blk-mq: Avoid race condition with uninitialized requests This patch should fix the bug reported in https://lkml.org/lkml/2014/9/11/249. We have to initialize at least the atomic_flags and the cmd_flags when allocating storage for the requests. Otherwise blk_mq_timeout_check() might dereference uninitialized pointers when racing with the creation of a request. Also move the reset of cmd_flags for the initializing code to the point where a request is freed. So we will never end up with pending flush request indicators that might trigger dereferences of invalid pointers in blk_mq_timeout_check(). Cc: stable@vger.kernel.org Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reported-by: Paulo De Rezende Pinatti <ppinatti@linux.vnet.ibm.com> Tested-by: Paulo De Rezende Pinatti <ppinatti@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 17:55:14 UTC |
| 538b753 | Jens Axboe | 16 September 2014, 16:37:37 UTC | blk-mq: request deadline must be visible before marking rq as started When we start the request, we set the deadline and flip the bits marking the request as started and non-complete. However, it's important that the deadline store is ordered before flipping the bits, otherwise we could have a small window where the request is marked started but with an invalid deadline. This can confuse the timeout handling. Suggested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 22 September 2014, 17:54:04 UTC |
| 4e5f9ef | David S. Miller | 22 September 2014, 17:25:51 UTC | pch_gbe: 'select' NET_PTP_CLASSIFY. Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 17:25:51 UTC |
| df568d8 | David S. Miller | 22 September 2014, 17:14:33 UTC | scsi: Use 'depends' with LIBFC instead of 'select'. LIBFC depends upon SCSI_FC_ATTRS and select's CRC32C. The only alternative would be to 'select' CRC32C and all of SCSI_FC_ATTRS direct and indirect dependencies in the Kconfig section for every LIBFCOE user which makes little sense. Subsequently, use 'depends' instead of 'select' for LIBFCOE too. Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2014, 17:14:33 UTC |
| 3bdad2d | Roland Dreier | 22 September 2014, 17:05:40 UTC | Merge branches 'core', 'ipoib', 'iser', 'mlx4', 'ocrdma' and 'qib' into for-next | 22 September 2014, 17:05:40 UTC |
| 25476b0 | Jack Morgenstein | 11 September 2014, 11:11:20 UTC | IB/mlx4: Fix VF mac handling in RoCE We had several problems here. First, a race condition on QP1 mac handling between mlx4_ib_update_qps and mlx4_ib_modify_qp, which is fixed by taking the qp mutex in mlx4_ib_update_qps. Also, qp->pri.smac_port was not updated in mlx4_ib_update_qps. Last, in __mlx4_ib_modify_qp we did not properly handle the case where the mac is zero, but port is non-zero. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:53 UTC |
| 3dec487 | Jack Morgenstein | 11 September 2014, 11:11:19 UTC | IB/mlx4: Do not allow APM under RoCE Automatic Path Migration is not supported under RoCE. Therefore, return a "not-supported" error if the caller attempts to set an alternate path in a QP context. In addition, if there are no IB ports configured, do not report APM capability in the device flags returned by mlx4_ib_query_device. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:53 UTC |
| d24d9f4 | Jack Morgenstein | 11 September 2014, 11:11:18 UTC | IB/mlx4: Don't update QP1 in native mode For native functions (non-SR-IOV), there's no reason to update the smac_index, as QP1 is a GSI QP. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:53 UTC |
| 3e0629c | Jack Morgenstein | 11 September 2014, 11:11:17 UTC | IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header The source MAC is needed in RoCE when building the QP1 header. Currently, this is obtained from the source net device. However, the net device may not yet exist, or can be destroyed in parallel to this QP1 send operation (e.g through the VPI port change flow) so accessing it may cause a kernel crash. To fix this, we maintain a source MAC cache per port for the net device in struct mlx4_ib_roce. This cached MAC is initialized to be the default MAC address obtained during HCA initialization via QUERY_PORT. This cached MAC is updated via the netdev event notifier handler. Since the cached MAC is held in an atomic64 object, we do not need locking when accessing it. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:53 UTC |
| f4fd40b | Jack Morgenstein | 11 September 2014, 11:11:16 UTC | mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses There is a chance that the VF mlx4 RoCE driver (mlx4_ib) may see a 0-mac as the current default MAC address when a RoCE interface first comes up. In this case, the RoCE driver registers the 0-mac to get its MAC index -- used in the INIT2RTR transition when it creates its proxy Q1 qp's. If we do not allow QP1 to be created, the RoCE driver will not come up. If we do not register the 0-mac, but simply use a random mac-index, QP1 will attempt to send packets with an someone's else source MAC which will get the system into more troubled. Since a 0-mac was previously used to indicate a free slot, this leads to errors, both when the 0-mac is registered and when it is unregistered. The required fix is to check in addition that the slot containing the 0-mac has a reference count of zero. Additionally, when comparing MAC addresses, need to mask out the 2 MSBs of the u64 mac on both sides of the comparison. Note that when the EN driver (mlx4_en) comes up, it set itself a proper mac --> the RoCE driver gets to be notified on that and further handing is done with the update qp command, as was added by commit 9433c188915c ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes"). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:53 UTC |
| a59c585 | Matan Barak | 02 September 2014, 12:32:34 UTC | IB/core: When marshaling uverbs path, clear unused fields When marsheling a user path to the kernel struct ib_sa_path, need to zero smac, dmac and set the vlan id to the "no vlan" value. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Reported-by: Aleksey Senin <alekseys@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
| 4bf9715 | Moni Shoua | 21 August 2014, 11:28:42 UTC | IB/mlx4: Avoid executing gid task when device is being removed When device is being removed (e.g during VPI port link type change from ETH to IB), tasks for gid table changes should not be executed. Flush the current queue of tasks and block further tasks from entering the queue. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
| dba3ad2 | Jack Morgenstein | 21 August 2014, 11:28:41 UTC | IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
| bccb84f | Moni Shoua | 21 August 2014, 11:28:40 UTC | IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up When a RoCE port becomes active and the netdev of the port has upper device (e.g bond/team), GIDs derived from the upper dev should appear in the port's RoCE GID table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
| 655b2aa | Moni Shoua | 21 August 2014, 11:28:39 UTC | IB/mlx4: Reorder steps in RoCE GID table initialization There's no need to reset the gid table twice and we need to do it only for Ethernet ports. Also, no need to actively scan ndetdevs since it's being done immediatly after we register netdev notifiers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
| f5c4834 | Moni Shoua | 21 August 2014, 11:28:38 UTC | IB/mlx4: Don't duplicate the default RoCE GID When reading the IPv6 addresses from the net-device, make sure to avoid adding a duplicate entry to the GID table because of equality between the default GID we generate and the default IPv6 link-local address of the device. Fixes: acc4fccf4eff ("IB/mlx4: Make sure GID index 0 is always occupied") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 22 September 2014, 16:46:52 UTC |
