| 3808d34 | Stanislaw Gruszka | 02 February 2017, 12:32:10 UTC | ethtool: do not vzalloc(0) on registers dump If ->get_regs_len() callback return 0, we allocate 0 bytes of memory, what print ugly warning in dmesg, which can be found further below. This happen on mac80211 devices where ieee80211_get_regs_len() just return 0 and driver only fills ethtool_regs structure and actually do not provide any dump. However I assume this can happen on other drivers i.e. when for some devices driver provide regs dump and for others do not. Hence preventing to to print warning in ethtool code seems to be reasonable. ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO) <snip> Call Trace: [<ffffffff813bde47>] dump_stack+0x63/0x8c [<ffffffff811b0a1f>] warn_alloc+0x13f/0x170 [<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0 [<ffffffff811f0874>] vzalloc+0x54/0x60 [<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30 [<ffffffff816adbb1>] dev_ioctl+0x181/0x520 [<ffffffff816714d2>] sock_do_ioctl+0x42/0x50 <snip> Mem-Info: active_anon:435809 inactive_anon:173951 isolated_anon:0 active_file:835822 inactive_file:196932 isolated_file:0 unevictable:0 dirty:8 writeback:0 unstable:0 slab_reclaimable:157732 slab_unreclaimable:10022 mapped:83042 shmem:306356 pagetables:9507 bounce:0 free:130041 free_pcp:1080 free_cma:0 Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 3187 7643 7643 Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB lowmem_reserve[]: 0 0 4456 4456 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 16:13:00 UTC |
| 013e816 | David Lebrun | 02 February 2017, 10:29:38 UTC | ipv6: sr: remove cleanup flag and fix HMAC computation In the latest version of the IPv6 Segment Routing IETF draft [1] the cleanup flag is removed and the flags field length is shrunk from 16 bits to 8 bits. As a consequence, the input of the HMAC computation is modified in a non-backward compatible way by covering the whole octet of flags instead of only the cleanup bit. As such, if an implementation compatible with the latest draft computes the HMAC of an SRH who has other flags set to 1, then the HMAC result would differ from the current implementation. This patch carries those modifications to prevent conflict with other implementations of IPv6 SR. [1] https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-05 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 16:05:23 UTC |
| cafe8df | Mao Wenan | 01 February 2017, 02:46:43 UTC | net: phy: Fix lack of reference count on PHY driver There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 03:59:43 UTC |
| 2372bcd | David S. Miller | 03 February 2017, 02:27:05 UTC | Merge branch 'mlx4-queue-reinit' Martin KaFai Lau says: ==================== mlx4: Misc bug fixes after reinitializing queues This patchset fixes misc bugs after reinitializing queues (e.g. by ethtool -L). v2: * Add another fix to mem leak in tx_ring[t] and tx_cq[t] * In mlx4_en_try_alloc_resources(), move all xdp_prog logic after calling mlx4_en_alloc_resources() ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 02:27:05 UTC |
| 770f822 | Martin KaFai Lau | 01 February 2017, 06:35:33 UTC | mlx4: xdp_prog becomes inactive after ethtool '-L' or '-G' After calling mlx4_en_try_alloc_resources (e.g. by changing the number of rx-queues with ethtool -L), the existing xdp_prog becomes inactive. The bug is that the xdp_prog ptr has not been carried over from the old rx-queues to the new rx-queues Fixes: 47a38e155037 ("net/mlx4_en: add support for fast rx drop bpf program") Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 02:27:05 UTC |
| f32b20e | Martin KaFai Lau | 01 February 2017, 06:35:32 UTC | mlx4: Fix memory leak after mlx4_en_update_priv() In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t] are over-written by src->tx_ring[t] and src->tx_cq[t] without first calling kfree. One of the reproducible code paths is by doing 'ethtool -L'. The fix is to do the kfree in mlx4_en_free_resources(). Here is the kmemleak report: unreferenced object 0xffff880841211800 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0a8>] mlx4_en_try_alloc_resources+0x118/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff880841213000 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0cb>] mlx4_en_try_alloc_resources+0x13b/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff (gdb) list *mlx4_en_try_alloc_resources+0x118 0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145). 2140 if (!dst->tx_ring_num[t]) 2141 continue; 2142 2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) * 2144 MAX_TX_RINGS, GFP_KERNEL); 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); (gdb) list *mlx4_en_try_alloc_resources+0x13b 0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150). 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); 2150 if (!dst->tx_cq[t]) { 2151 kfree(dst->tx_ring[t]); 2152 goto err_free_tx; 2153 } 2154 } Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 03 February 2017, 02:27:05 UTC |
| 6d04dfc | Linus Torvalds | 01 February 2017, 19:52:27 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix handling of interrupt status in stmmac driver. Just because we have masked the event from generating interrupts, doesn't mean the bit won't still be set in the interrupt status register. From Alexey Brodkin. 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha. 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich. 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman. 5) Initial MAC address can be set incorrectly in some scenerios, from Ivan Vecera. 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(), from Dan Carpenter. 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet. 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens Axboe. 9) Check for DMA mapping errors in starfire driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) tcp: fix 0 divide in __tcp_select_window() ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() net: fix ndo_features_check/ndo_fix_features comment ordering net/sched: matchall: Fix configuration race be2net: fix initial MAC setting ipv6: fix flow labels when the traffic class is non-0 net: thunderx: avoid dereferencing xcv when NULL net/sched: cls_flower: Correct matching on ICMPv6 code ipv6: Paritially checksum full MTU frames net/mlx4_core: Avoid command timeouts during VF driver device shutdown gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page net: ethtool: add support for 2500BaseT and 5000BaseT link modes can: bcm: fix hrtimer/tasklet termination in bcm op removal net: adaptec: starfire: add checks for dma mapping errors net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause can: Fix kernel panic at security_sock_rcv_skb net: macb: Fix 64 bit addressing support for GEM stmmac: Discard masked flags in interrupt status register net/mlx5e: Check ets capability before ets query FW command net/mlx5e: Fix update of hash function/key via ethtool ... | 01 February 2017, 19:52:27 UTC |
| 2883aae | Linus Torvalds | 01 February 2017, 18:30:56 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fscache fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fscache: Fix dead object requeue fscache: Clear outstanding writes when disabling a cookie FS-Cache: Initialise stores_lock in netfs cookie | 01 February 2017, 18:30:56 UTC |
| 06425c3 | Eric Dumazet | 01 February 2017, 16:33:53 UTC | tcp: fix 0 divide in __tcp_select_window() syszkaller fuzzer was able to trigger a divide by zero, when TCP window scaling is not enabled. SO_RCVBUF can be used not only to increase sk_rcvbuf, also to decrease it below current receive buffers utilization. If mss is negative or 0, just return a zero TCP window. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 February 2017, 17:55:42 UTC |
| 63117f0 | Dan Carpenter | 01 February 2017, 08:46:32 UTC | ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 February 2017, 17:27:33 UTC |
| e387dc1 | Linus Torvalds | 01 February 2017, 17:24:00 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bug in CBC/CTR on ARM64 that breaks chaining as well as a bug in the core API that causes registration failures when a driver unloads and then reloads an algorithm" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg | 01 February 2017, 17:24:00 UTC |
| 3560950 | Linus Torvalds | 01 February 2017, 17:22:08 UTC | Merge tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A couple of fixes showed up late in the cycle so sending them up and sending early in the week and not on Friday :). They fix a double lock in pl330 driver and runtime pm fixes for cppi driver" * tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pl330: fix double lock dmaengine: cppi41: Clean up pointless warnings dmaengine: cppi41: Fix oops in cppi41_runtime_resume dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage | 01 February 2017, 17:22:08 UTC |
| 1a2a144 | Dimitris Michailidis | 01 February 2017, 00:03:13 UTC | net: fix ndo_features_check/ndo_fix_features comment ordering Commit cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") inadvertently moved the doc comment for .ndo_fix_features instead of .ndo_features_check. Fix the comment ordering. Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 February 2017, 17:10:56 UTC |
| fd62d9f | Yotam Gigi | 31 January 2017, 13:14:29 UTC | net/sched: matchall: Fix configuration race In the current version, the matchall internal state is split into two structs: cls_matchall_head and cls_matchall_filter. This makes little sense, as matchall instance supports only one filter, and there is no situation where one exists and the other does not. In addition, that led to some races when filter was deleted while packet was processed. Unify that two structs into one, thus simplifying the process of matchall creation and deletion. As a result, the new, delete and get callbacks have a dummy implementation where all the work is done in destroy and change callbacks, as was done in cls_cgroup. Fixes: bf3994d2ed31 ("net/sched: introduce Match-all classifier") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 February 2017, 16:57:33 UTC |
| c325b35 | Linus Torvalds | 01 February 2017, 16:34:13 UTC | Merge tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Another week, another set of pin control fixes. The subsystem has seen high patch-spot activity recently. The majority of the patches are for Intel, I vaguely think it mostly concern phones, tablets and maybe chromebooks and even laptops with this Intel Atom family chips. Driver fixes only: - one fix to the Berlin driver making the SD card work fully again. - one fix to the Allwinner/sunxi bias function: one premature change needs to be partially reverted. - the remaining four patches are to Intel embedded SoCs: baytrail (three patches) and merrifield (one patch): register access debounce fixes and a missing spinlock" * tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler pinctrl: baytrail: Debounce register is one per community pinctrl: baytrail: Rectify debounce support (part 2) pinctrl: intel: merrifield: Add missed check in mrfld_config_set() pinctrl: sunxi: Don't enforce bias disable (for now) pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES | 01 February 2017, 16:34:13 UTC |
| 4993b39 | Ivan Vecera | 31 January 2017, 19:01:31 UTC | be2net: fix initial MAC setting Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail. The MAC should be initialized only when: 1) no MAC is programmed (always except BE3 VFs during first init) 2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted. The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case. Example of failure without the fix (immediately after fresh boot): # ip link set eth0 up <- eth0 is BE3 PF be2net 0000:01:00.0 eth0: Link is Up # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF ... be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0 # ip link set eth8 up <- eth8 is created privileged VF be2net 0000:01:04.0: opcode 59-1 failed:status 1-76 RTNETLINK answers: Input/output error # echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF iommu: Removing device 0000:01:04.0 from group 33 ... # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again iommu: Removing device 0000:01:04.0 from group 33 ... # ip link set eth8 up be2net 0000:01:04.0 eth8: Link is Up Initialization is now OK. v2 - Corrected the comment and condition check suggested by Suresh & Harsha Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 February 2017, 16:11:41 UTC |
| a2ca3d6 | Linus Torvalds | 01 February 2017, 00:32:40 UTC | Merge tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "It was reported to me that the thread created by the hwlat tracer does not migrate after the first instance. I found that there was as small bug in the logic, and fixed it. It's minor, but should be fixed regardless. There's not much impact outside the hwlat tracer" * tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix hwlat kthread migration | 01 February 2017, 00:32:40 UTC |
| 283725a | Linus Torvalds | 31 January 2017, 21:59:10 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop throwing erroneous warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake Input: wm97xx - make missing platform data non-fatal | 31 January 2017, 21:59:10 UTC |
| f1774f4 | Linus Torvalds | 31 January 2017, 21:54:41 UTC | Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "The cgroup creation path was getting the order of operations wrong and exposing cgroups which don't have their names set yet to controllers which can lead to NULL derefs. This contains the fix for the bug" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: don't online subsystems before cgroup_name/path() are operational | 31 January 2017, 21:54:41 UTC |
| 298a2d8 | Linus Torvalds | 31 January 2017, 21:10:59 UTC | Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu fix from Tejun Heo: "Douglas found and fixed a ref leak bug in percpu_ref_tryget[_live](). The bug is caused by storing the return value of atomic_long_inc_not_zero() into an int temp variable before returning it as a bool. The interim cast to int loses the upper bits and can lead to false negatives. As percpu_ref uses a high bit to mark a draining counter, this can happen relatively easily. Fixed by using bool for the temp variable" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu-refcount: fix reference leak during percpu-atomic transition | 31 January 2017, 21:10:59 UTC |
| 52e02f2 | Linus Torvalds | 31 January 2017, 21:07:04 UTC | Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Three libata fixes: an error handling fix, blacklist addition for another fallout from upping the default max sectors, and fix for a sense data reporting bug which affects new harddrives which can report sense data" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: sata_mv:- Handle return value of devm_ioremap. libata: Fix ATA request sense libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices | 31 January 2017, 21:07:04 UTC |
| c9194b9 | Linus Torvalds | 31 January 2017, 21:05:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fix (sleeping while atomic) for cp2112, from Johan Hovold - regression fix for proximity handling under certain circumstances in Wacom driver, from Jason Gerecke - functional fix for Logitech Rumblepad 2, from Ardinartsev Nikita * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: cp2112: fix gpio-callback error handling HID: cp2112: fix sleep-while-atomic HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2 HID: usbhid: Quirk a AMI virtual mouse and keyboard with ALWAYS_POLL HID: wacom: Fix poor prox handling in 'wacom_pl_irq' | 31 January 2017, 21:05:15 UTC |
| 415f9b7 | Linus Torvalds | 31 January 2017, 20:36:39 UTC | Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fix from Steve French: "A small cifs fix for stable" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: initialize file_info_lock | 31 January 2017, 20:36:39 UTC |
| e26bfeb | David Howells | 31 January 2017, 09:45:28 UTC | fscache: Fix dead object requeue Under some circumstances, an fscache object can become queued such that it fscache_object_work_func() can be called once the object is in the OBJECT_DEAD state. This results in the kernel oopsing when it tries to invoke the handler for the state (which is hard coded to 0x2). The way this comes about is something like the following: (1) The object dispatcher is processing a work state for an object. This is done in workqueue context. (2) An out-of-band event comes in that isn't masked, causing the object to be queued, say EV_KILL. (3) The object dispatcher finishes processing the current work state on that object and then sees there's another event to process, so, without returning to the workqueue core, it processes that event too. It then follows the chain of events that initiates until we reach OBJECT_DEAD without going through a wait state (such as WAIT_FOR_CLEARANCE). At this point, object->events may be 0, object->event_mask will be 0 and oob_event_mask will be 0. (4) The object dispatcher returns to the workqueue processor, and in due course, this sees that the object's work item is still queued and invokes it again. (5) The current state is a work state (OBJECT_DEAD), so the dispatcher jumps to it - resulting in an OOPS. When I'm seeing this, the work state in (1) appears to have been either LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is fscache_osm_lookup_oob). The window for (2) is very small: (A) object->event_mask is cleared whilst the event dispatch process is underway - though there's no memory barrier to force this to the top of the function. The window, therefore is from the time the object was selected by the workqueue processor and made requeueable to the time the mask was cleared. (B) fscache_raise_event() will only queue the object if it manages to set the event bit and the corresponding event_mask bit was set. The enqueuement is then deferred slightly whilst we get a ref on the object and get the per-CPU variable for workqueue congestion. This slight deferral slightly increases the probability by allowing extra time for the workqueue to make the item requeueable. Handle this by giving the dead state a processor function and checking the for the dead state address rather than seeing if the processor function is address 0x2. The dead state processor function can then set a flag to indicate that it's occurred and give a warning if it occurs more than once per object. If this race occurs, an oops similar to the following is seen (note the RIP value): BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 IP: [<0000000000000002>] 0x1 PGD 0 Oops: 0010 [#1] SMP Modules linked in: ... CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000 RIP: 0010:[<0000000000000002>] [<0000000000000002>] 0x1 RSP: 0018:ffff880717547df8 EFLAGS: 00010202 RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200 RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480 RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510 R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000 R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600 FS: 0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900 Call Trace: [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff816460d8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeremy McNicoll <jeremymc@redhat.com> Tested-by: Frank Sorenson <sorenson@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 31 January 2017, 18:23:09 UTC |
| 6bdded5 | David Howells | 18 January 2017, 14:29:25 UTC | fscache: Clear outstanding writes when disabling a cookie fscache_disable_cookie() needs to clear the outstanding writes on the cookie it's disabling because they cannot be completed after. Without this, fscache_nfs_open_file() gets stuck because it disables the cookie when the file is opened for writing but can't uncache the pages till afterwards - otherwise there's a race between the open routine and anyone who already has it open R/O and is still reading from it. Looking in /proc/pid/stack of the offending process shows: [<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache] [<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache] [<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs] [<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4] [<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7 [<ffffffff811743ac>] vfs_open+0x5c/0x65 [<ffffffff81184185>] path_openat+0x785/0x8fb [<ffffffff81184343>] do_filp_open+0x48/0x9e [<ffffffff81174710>] do_sys_open+0x13b/0x1cb [<ffffffff811747b9>] SyS_open+0x19/0x1b [<ffffffff81001c44>] do_syscall_64+0x80/0x17a [<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 31 January 2017, 18:23:09 UTC |
| 62deb81 | David Howells | 18 January 2017, 14:29:17 UTC | FS-Cache: Initialise stores_lock in netfs cookie Initialise the stores_lock in fscache netfs cookies. Technically, it shouldn't be necessary, since the netfs cookie is an index and stores no data, but initialising it anyway adds insignificant overhead. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 31 January 2017, 18:23:09 UTC |
| 90427ef | Dimitris Michailidis | 30 January 2017, 22:09:42 UTC | ipv6: fix flow labels when the traffic class is non-0 ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 January 2017, 18:16:59 UTC |
| c73e442 | Vincent | 30 January 2017, 14:06:43 UTC | net: thunderx: avoid dereferencing xcv when NULL This fixes the following smatch and coccinelle warnings: drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch] drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle] Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 January 2017, 18:07:40 UTC |
| 79c6f44 | Steven Rostedt (VMware) | 31 January 2017, 00:27:10 UTC | tracing: Fix hwlat kthread migration The hwlat tracer creates a kernel thread at start of the tracer. It is pinned to a single CPU and will move to the next CPU after each period of running. If the user modifies the migration thread's affinity, it will not change after that happens. The original code created the thread at the first instance it was called, but later was changed to destroy the thread after the tracer was finished, and would not be created until the next instance of the tracer was established. The code that initialized the affinity was only called on the initial instantiation of the tracer. After that, it was not initialized, and the previous affinity did not match the current newly created one, making it appear that the user modified the thread's affinity when it did not, and the thread failed to migrate again. Cc: stable@vger.kernel.org Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 31 January 2017, 14:13:49 UTC |
| 8e9faa1 | Johan Hovold | 30 January 2017, 10:26:39 UTC | HID: cp2112: fix gpio-callback error handling In case of a zero-length report, the gpio direction_input callback would currently return success instead of an errno. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 31 January 2017, 11:59:33 UTC |
| 7a7b5df | Johan Hovold | 30 January 2017, 10:26:38 UTC | HID: cp2112: fix sleep-while-atomic A recent commit fixing DMA-buffers on stack added a shared transfer buffer protected by a spinlock. This is broken as the USB HID request callbacks can sleep. Fix this up by replacing the spinlock with a mutex. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 31 January 2017, 11:59:32 UTC |
| 05e0be7 | Christophe JAILLET | 31 January 2017, 08:47:30 UTC | Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake These tests are reversed. A warning should be displayed if an error is returned, not on success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 31 January 2017, 08:51:06 UTC |
| f9a42e0 | Linus Torvalds | 30 January 2017, 23:47:19 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: "Several small bug fixes and tidies, along with a fix for non-resumable memory errors triggered by userspace" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Handle PIO & MEM non-resumable errors. sparc64: Zero pages on allocation for mondo and error queues. sparc: Fixed typo in sstate.c. Replaced panicing with panicking sparc: use symbolic names for tsb indexing | 30 January 2017, 23:47:19 UTC |
| 54791b2 | David S. Miller | 30 January 2017, 22:28:22 UTC | Merge branch 'sparc64-non-resumable-user-error-recovery' Liam R. Howlett says: ==================== sparc64: Recover from userspace non-resumable PIO & MEM errors A non-resumable error from userspace is able to cause a kernel panic or trap loop due to the setup and handling of the queued traps once in the kernel. This patch series addresses both of these issues. The queues are fixed by simply zeroing the memory before use. PIO errors from userspace will result in a SIGBUS being sent to the user process. The MEM errors form userspace will result in a SIGKILL and also cause the offending pages to be claimed so they are no longer used in future tasks. SIGKILL is used to ensure that the process does not try to coredump and result in an attempt to read the memory again from within kernel space. Although there is a HV call to scrub the memory (mem_scrub), there is no easy way to guarantee that the real memory address(es) are not used by other tasks. Clearing the error with mem_scrub would zero the memory and cause the other processes to proceed with bad data. The handling of other non-resumable errors remain unchanged and will cause a panic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 22:28:22 UTC |
| 0474872 | Liam R. Howlett | 17 January 2017, 15:59:03 UTC | sparc64: Handle PIO & MEM non-resumable errors. User processes trying to access an invalid memory address via PIO will receive a SIGBUS signal instead of causing a panic. Memory errors will receive a SIGKILL since a SIGBUS may result in a coredump which may attempt to repeat the faulting access. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 22:27:54 UTC |
| 7a7dc96 | Liam R. Howlett | 17 January 2017, 15:59:02 UTC | sparc64: Zero pages on allocation for mondo and error queues. Error queues use a non-zero first word to detect if the queues are full. Using pages that have not been zeroed may result in false positive overflow events. These queues are set up once during boot so zeroing all mondo and error queue pages is safe. Note that the false positive overflow does not always occur because the page allocation for these queues is so early in the boot cycle that higher number CPUs get fresh pages. It is only when traps are serviced with lower number CPUs who were given already used pages that this issue is exposed. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 22:27:53 UTC |
| 040587a | Simon Horman | 30 January 2017, 15:19:02 UTC | net/sched: cls_flower: Correct matching on ICMPv6 code When matching on the ICMPv6 code ICMPV6_CODE rather than ICMPV4_CODE attributes should be used. This corrects what appears to be a typo. Sample usage: tc qdisc add dev eth0 ingress tc filter add dev eth0 protocol ipv6 parent ffff: flower \ indev eth0 ip_proto icmpv6 type 128 code 0 action drop Without this change the code parameter above is effectively ignored. Fixes: 7b684884fbfa ("net/sched: cls_flower: Support matching on ICMP type and code") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 21:42:09 UTC |
| 0d29ed2 | David S. Miller | 30 January 2017, 21:38:39 UTC | Merge tag 'linux-can-fixes-for-4.10-20170130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-01-30 this is a pull request of one patch. The patch is by Oliver Hartkopp and fixes the hrtimer/tasklet termination in bcm op removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 21:38:39 UTC |
| 751321b | Linus Torvalds | 30 January 2017, 21:18:12 UTC | Merge tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fix from Alexandre Belloni: "A single fix for this cycle. It is worth taking it for 4.10 so that distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to y in their config. Summary: - Allow jz4740 to build as a module again by using kernel_halt()" * tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: jz4740: make the driver buildable as a module again | 30 January 2017, 21:18:12 UTC |
| 2b89ed6 | Vlad Yasevich | 30 January 2017, 03:52:53 UTC | ipv6: Paritially checksum full MTU frames IPv6 will mark data that is smaller that mtu - headersize as CHECKSUM_PARTIAL, but if the data will completely fill the mtu, the packet checksum will be computed in software instead. Extend the conditional to include the data that fills the mtu as well. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 20:51:12 UTC |
| d585df1 | Jack Morgenstein | 30 January 2017, 13:11:45 UTC | net/mlx4_core: Avoid command timeouts during VF driver device shutdown Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 20:45:27 UTC |
| 6415aa5 | David S. Miller | 30 January 2017, 20:44:05 UTC | Merge tag 'mlx5-fixes-2017-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-01-27 A couple of mlx5 core and ethernet driver fixes. From Or, A couple of error return values and error handling fixes. From Hadar, Support TC encapsulation offloads even when the mlx5e uplink device is stacked under an upper device. From Gal, Two patches to fix RSS hash modifications via ethtool. From Moshe, Added a needed ets capability check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 20:44:05 UTC |
| 051a2e0 | David S. Miller | 30 January 2017, 20:19:23 UTC | Merge tag 'wireless-drivers-for-davem-2017-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Most important here are fixes to two iwlwifi crashes, but there's also a firmware naming fix for iwlwifi and a revert of an older bcma patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 20:19:23 UTC |
| 4af0e5b | Arseny Solokha | 29 January 2017, 12:52:20 UTC | gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 16:19:37 UTC |
| 94842b4 | Pavel Belous | 28 January 2017, 19:53:28 UTC | net: ethtool: add support for 2500BaseT and 5000BaseT link modes This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 15:14:28 UTC |
| cdca06e | Alexander Stein | 30 January 2017, 11:35:28 UTC | pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 14:53:57 UTC |
| 1b89970 | Andy Shevchenko | 26 January 2017, 17:24:08 UTC | pinctrl: baytrail: Debounce register is one per community Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 14:48:15 UTC |
| 827e157 | Andy Shevchenko | 26 January 2017, 17:24:07 UTC | pinctrl: baytrail: Rectify debounce support (part 2) The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 14:46:33 UTC |
| a06393e | Oliver Hartkopp | 18 January 2017, 20:30:51 UTC | can: bcm: fix hrtimer/tasklet termination in bcm op removal When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by: Michael Josenhans <michael.josenhans@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Michael Josenhans <michael.josenhans@web.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 30 January 2017, 10:05:04 UTC |
| 19b26d9 | Andy Shevchenko | 24 January 2017, 15:28:22 UTC | pinctrl: intel: merrifield: Add missed check in mrfld_config_set() Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 08:15:10 UTC |
| 2154d94 | Maxime Ripard | 23 January 2017, 08:21:30 UTC | pinctrl: sunxi: Don't enforce bias disable (for now) Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 08:15:10 UTC |
| e82d025 | Jisheng Zhang | 23 January 2017, 07:15:32 UTC | pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES This should be a typo. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 30 January 2017, 08:15:10 UTC |
| d1156b4 | Alexey Khoroshilov | 27 January 2017, 22:07:30 UTC | net: adaptec: starfire: add checks for dma mapping errors init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 January 2017, 00:04:11 UTC |
| cf626c3 | Sean Nyekjaer | 27 January 2017, 20:39:03 UTC | net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 January 2017, 23:45:15 UTC |
| f1712c7 | Eric Dumazet | 27 January 2017, 16:11:44 UTC | can: Fix kernel panic at security_sock_rcv_skb Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 January 2017, 23:30:56 UTC |
| dc97a89 | Rafal Ozieblo | 27 January 2017, 15:08:20 UTC | net: macb: Fix 64 bit addressing support for GEM This patch adds support for 32 bit GEM in 64 bit system. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 January 2017, 23:26:23 UTC |
| 0a764db | Alexey Brodkin | 27 January 2017, 12:24:43 UTC | stmmac: Discard masked flags in interrupt status register DW GMAC databook says the following about bits in "Register 15 (Interrupt Mask Register)": --------------------------->8------------------------- When set, this bit __disables_the_assertion_of_the_interrupt_signal__ because of the setting of XXX bit in Register 14 (Interrupt Status Register). --------------------------->8------------------------- In fact even if we mask one bit in the mask register it doesn't prevent corresponding bit to appear in the status register, it only disables interrupt generation for corresponding event. But currently we expect a bit different behavior: status bits to be in sync with their masks, i.e. if mask for bit A is set in the mask register then bit A won't appear in the interrupt status register. This was proven to be incorrect assumption, see discussion here [1]. That misunderstanding causes unexpected behaviour of the GMAC, for example we were happy enough to just see bogus messages about link state changes. So from now on we'll be only checking bits that really may trigger an interrupt. [1] https://lkml.org/lkml/2016/11/3/413 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Cc: David Miller <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 January 2017, 23:15:18 UTC |
| 566cf87 | Linus Torvalds | 29 January 2017, 22:25:17 UTC | Linux 4.10-rc6 | 29 January 2017, 22:25:17 UTC |
| 39cb2c9 | Linus Torvalds | 29 January 2017, 21:50:06 UTC | drm/i915: Check for NULL i915_vma in intel_unpin_fb_obj() I've seen this trigger twice now, where the i915_gem_object_to_ggtt() call in intel_unpin_fb_obj() returns NULL, resulting in an oops immediately afterwards as the (inlined) call to i915_vma_unpin_fence() tries to dereference it. It seems to be some race condition where the object is going away at shutdown time, since both times happened when shutting down the X server. The call chains were different: - VT ioctl(KDSETMODE, KD_TEXT): intel_cleanup_plane_fb+0x5b/0xa0 [i915] drm_atomic_helper_cleanup_planes+0x6f/0x90 [drm_kms_helper] intel_atomic_commit_tail+0x749/0xfe0 [i915] intel_atomic_commit+0x3cb/0x4f0 [i915] drm_atomic_commit+0x4b/0x50 [drm] restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] intel_fbdev_set_par+0x18/0x70 [i915] fb_set_var+0x236/0x460 fbcon_blank+0x30f/0x350 do_unblank_screen+0xd2/0x1a0 vt_ioctl+0x507/0x12a0 tty_ioctl+0x355/0xc30 do_vfs_ioctl+0xa3/0x5e0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 - i915 unpin_work workqueue: intel_unpin_work_fn+0x58/0x140 [i915] process_one_work+0x1f1/0x480 worker_thread+0x48/0x4d0 kthread+0x101/0x140 and this patch purely papers over the issue by adding a NULL pointer check and a WARN_ON_ONCE() to avoid the oops that would then generally make the machine unresponsive. Other callers of i915_gem_object_to_ggtt() seem to also check for the returned pointer being NULL and warn about it, so this clearly has happened before in other places. [ Reported it originally to the i915 developers on Jan 8, applying the ugly workaround on my own now after triggering the problem for the second time with no feedback. This is likely to be the same bug reported as https://bugs.freedesktop.org/show_bug.cgi?id=98829 https://bugs.freedesktop.org/show_bug.cgi?id=99134 which has a patch for the underlying problem, but it hasn't gotten to me, so I'm applying the workaround. ] Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2017, 21:50:06 UTC |
| d15118a | Moshe Shemesh | 19 January 2017, 12:53:07 UTC | net/mlx5e: Check ets capability before ets query FW command On dcbnl callback getpgtccfgtx, the driver should check the ets capability before ets query command is sent to firmware. It is valid to return from this void function without changing in/out parameters, as these parameters are initialized to DCB_ATTR_VALUE_UNDEFINED. Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:31:26 UTC |
| a100ff3 | Gal Pressman | 12 January 2017, 14:25:46 UTC | net/mlx5e: Fix update of hash function/key via ethtool Modifying TIR hash should change selected fields bitmask in addition to the function and key. Formerly, Only on ethool mlx5e_set_rxfh "ethtoo -X" we would not set this field resulting in zeroing of its value, which means no packet fields are used for RX RSS hash calculation thus causing all traffic to arrive in RQ[0]. On driver load out of the box we don't have this issue, since the TIR hash is fully created from scratch. Tested: ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:31:18 UTC |
| 1d3398f | Gal Pressman | 11 January 2017, 12:32:26 UTC | net/mlx5e: Modify TIRs hash only when it's needed We don't need to modify our TIRs unless the user requested a change in the hash function/key, for example when changing indirection only. Tested: # Modify TIRs hash is needed ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> # Modify TIRs hash is not needed ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:29:32 UTC |
| 3e621b1 | Hadar Hen Zion | 12 January 2017, 09:07:40 UTC | net/mlx5e: Support TC encapsulation offloads with upper devices When tunneling is used, some virtualizations systems set the (mlx5e) uplink device to be stacked under upper devices such as bridge or ovs internal port, where the VTEP IP address used for the encapsulation is set on that upper device. In order to support such use-cases, we also deal with a setup where the egress mirred device isn't representing a port on the HW e-switch to where the ingress device belongs. We use eswitch service function which returns the uplink and set it as the egress device of the tc encap rule. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:01:39 UTC |
| 5bae8c0 | Or Gerlitz | 15 January 2017, 17:05:38 UTC | net/mlx5: E-Switch, Re-enable RoCE on mode change only after FDB destroy We must re-enable RoCE on the e-switch management port (PF) only after destroying the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported, this re-enablement will fail. Also, it's more natural and symmetric to disable RoCE on the PF before we create the FDB under switchdev mode, so do that as well and revert if getting into error during the mode change later. Fixes: 9da34cd34e85 ('net/mlx5: Disable RoCE on the e-switch management [..]') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:01:39 UTC |
| 5403dc7 | Or Gerlitz | 11 January 2017, 17:39:42 UTC | net/mlx5: E-Switch, Err when retrieving steering name-space fails Make sure to return error when we failed retrieving the FDB steering name space. Also, while around, correctly print the error when mode change revert fails in the warning message. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:01:38 UTC |
| eff596d | Or Gerlitz | 12 January 2017, 11:04:01 UTC | net/mlx5: Return EOPNOTSUPP when failing to get steering name-space When we fail to retrieve a hardware steering name-space, the returned error code should say that this operation is not supported. Align the various places in the driver where this call is made to this convention. Also, make sure to warn when we fail to retrieve a SW (ANCHOR) name-space. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:01:38 UTC |
| 9eb7892 | Or Gerlitz | 11 January 2017, 17:35:41 UTC | net/mlx5: Change ENOTSUPP to EOPNOTSUPP As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx5 driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Suggested-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 29 January 2017, 21:01:37 UTC |
| 2c5d955 | Linus Torvalds | 29 January 2017, 18:56:56 UTC | Merge branch 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull two parisc fixes from Helge Deller: "One fix to avoid usage of BITS_PER_LONG in user-space exported swab.h header which breaks compiling qemu, and one trivial fix for printk continuation in the parisc parport driver" * 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header parisc, parport_gsc: Fixes for printk continuation lines | 29 January 2017, 18:56:56 UTC |
| 53cd1ad | Linus Torvalds | 28 January 2017, 23:09:23 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two I2C driver bugfixes. The 'VLLS mode support' patch should have been entitled 'reconfigure pinctrl after suspend' to make the bugfix more clear. Sorry, I missed that, yet didn't want to rebase" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx-lpi2c: add VLLS mode support i2c: i2c-cadence: Initialize configuration before probing devices | 28 January 2017, 23:09:23 UTC |
| 2ad5d52 | Helge Deller | 28 January 2017, 10:52:02 UTC | parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin. Solve this problem by using __BITS_PER_LONG instead. Since we now #include asm/bitsperlong.h avoid further potential userspace pollution by moving the #define of SHIFT_PER_LONG to bitops.h which is not exported to userspace. This patch unbreaks compiling qemu on hppa/parisc. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> | 28 January 2017, 20:54:23 UTC |
| 83b5d1e | Helge Deller | 03 January 2017, 21:55:50 UTC | parisc, parport_gsc: Fixes for printk continuation lines Signed-off-by: Helge Deller <deller@gmx.de> | 28 January 2017, 20:54:21 UTC |
| d56a5ca | Linus Torvalds | 28 January 2017, 19:50:17 UTC | Merge tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Stable patches: - NFSv4.1: Fix a deadlock in layoutget - NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors - NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode - Fix a memory leak when removing the SUNRPC module Bugfixes: - Fix a reference leak in _pnfs_return_layout" * tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix a reference leak in _pnfs_return_layout nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED" SUNRPC: cleanup ida information when removing sunrpc module NFSv4.0: always send mode in SETATTR after EXCLUSIVE4 nfs: Don't increment lock sequence ID after NFS4ERR_MOVED NFSv4.1: Fix a deadlock in layoutget | 28 January 2017, 19:50:17 UTC |
| dd55396 | Linus Torvalds | 28 January 2017, 19:09:04 UTC | Merge tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: "This fixes several corner cases for raid5 cache, which is merged into this cycle" * tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/r5cache: disable write back for degraded array md/r5cache: shift complex rmw from read path to write path md/r5cache: flush data only stripes in r5l_recovery_log() md/raid5: move comment of fetch_block to right location md/r5cache: read data into orig_page for prexor of cached data md/raid5-cache: delete meaningless code | 28 January 2017, 19:09:04 UTC |
| 64a172d | Linus Torvalds | 28 January 2017, 19:06:42 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix kernel panic on ACPI-based systems where CPU capacity description is not currently handled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: skip register_cpufreq_notifier on ACPI-based systems | 28 January 2017, 19:06:42 UTC |
| ef1dce9 | Linus Torvalds | 28 January 2017, 19:00:08 UTC | Merge tag 'arc-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Hopefully last set of changes for ARC for 4.10: - fix for unaligned access emulation corner case - fix for udelay loop inline asm regression - fix irq affinity finally for AXS103 board [Yuriy] - final fixes for setting IO-coherency sanely in SMP" * tag 'arc-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [arcompact] handle unaligned access delay slot corner case ARCv2: smp-boot: wake_flag polling by non-Masters needs to be uncached ARC: smp-boot: Decouple Non masters waiting API from jump to entry point ARCv2: MCIP: update the BCR per current changes ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list ARCv2: MCIP: Deprecate setting of affinity in Device Tree | 28 January 2017, 19:00:08 UTC |
| 966d2b0 | Douglas Miller | 28 January 2017, 12:42:20 UTC | percpu-refcount: fix reference leak during percpu-atomic transition percpu_ref_tryget() and percpu_ref_tryget_live() should return "true" IFF they acquire a reference. But the return value from atomic_long_inc_not_zero() is a long and may have high bits set, e.g. PERCPU_COUNT_BIAS, and the return value of the tryget routines is bool so the reference may actually be acquired but the routines return "false" which results in a reference leak since the caller assumes it does not need to do a corresponding percpu_ref_put(). This was seen when performing CPU hotplug during I/O, as hangs in blk_mq_freeze_queue_wait where percpu_ref_kill (blk_mq_freeze_queue_start) raced with percpu_ref_tryget (blk_mq_timeout_work). Sample stack trace: __switch_to+0x2c0/0x450 __schedule+0x2f8/0x970 schedule+0x48/0xc0 blk_mq_freeze_queue_wait+0x94/0x120 blk_mq_queue_reinit_work+0xb8/0x180 blk_mq_queue_reinit_prepare+0x84/0xa0 cpuhp_invoke_callback+0x17c/0x600 cpuhp_up_callbacks+0x58/0x150 _cpu_up+0xf0/0x1c0 do_cpu_up+0x120/0x150 cpu_subsys_online+0x64/0xe0 device_online+0xb4/0x120 online_store+0xb4/0xc0 dev_attr_store+0x68/0xa0 sysfs_kf_write+0x80/0xb0 kernfs_fop_write+0x17c/0x250 __vfs_write+0x6c/0x1e0 vfs_write+0xd0/0x270 SyS_write+0x6c/0x110 system_call+0x38/0xe0 Examination of the queue showed a single reference (no PERCPU_COUNT_BIAS, and __PERCPU_REF_DEAD, __PERCPU_REF_ATOMIC set) and no requests. However, conditions at the time of the race are count of PERCPU_COUNT_BIAS + 0 and __PERCPU_REF_DEAD and __PERCPU_REF_ATOMIC set. The fix is to make the tryget routines use an actual boolean internally instead of the atomic long result truncated to a int. Fixes: e625305b3907 percpu-refcount: make percpu_ref based on longs instead of ints Link: https://bugzilla.kernel.org/show_bug.cgi?id=190751 Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Reviewed-by: Jens Axboe <axboe@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e625305b3907 ("percpu-refcount: make percpu_ref based on longs instead of ints") Cc: stable@vger.kernel.org # v3.18+ | 28 January 2017, 12:49:42 UTC |
| 2b1d530 | Kalle Valo | 27 January 2017, 12:19:25 UTC | MAINTAINERS: ath9k-devel is closed ath9k-devel list is now closed, only linux-wireless should be used. Reported-by: Michael Renzmann <mrenzmann@madwifi-project.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 28 January 2017, 07:15:50 UTC |
| 1b1bc42 | Linus Torvalds | 27 January 2017, 20:54:16 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP DF on transmit). 2) Netfilter needs to reflect the fwmark when sending resets, from Pau Espin Pedrol. 3) nftable dump OOPS fix from Liping Zhang. 4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit, from Rolf Neugebauer. 5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd Bergmann. 6) Fix regression in handling of NETIF_F_SG in harmonize_features(), from Eric Dumazet. 7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern. 8) tcp_fastopen_create_child() needs to setup tp->max_window, from Alexey Kodanev. 9) Missing kmemdup() failure check in ipv6 segment routing code, from Eric Dumazet. 10) Don't execute unix_bind() under the bindlock, otherwise we deadlock with splice. From WANG Cong. 11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer, therefore callers must reload cached header pointers into that skb. Fix from Eric Dumazet. 12) Fix various bugs in legacy IRQ fallback handling in alx driver, from Tobias Regnery. 13) Do not allow lwtunnel drivers to be unloaded while they are referenced by active instances, from Robert Shearman. 14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven. 15) Fix a few regressions from virtio_net XDP support, from John Fastabend and Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits) ISDN: eicon: silence misleading array-bounds warning net: phy: micrel: add support for KSZ8795 gtp: fix cross netns recv on gtp socket gtp: clear DF bit on GTP packet tx gtp: add genl family modules alias tcp: don't annotate mark on control socket from tcp_v6_send_response() ravb: unmap descriptors when freeing rings virtio_net: reject XDP programs using header adjustment virtio_net: use dev_kfree_skb for small buffer XDP receive r8152: check rx after napi is enabled r8152: re-schedule napi for tx r8152: avoid start_xmit to schedule napi when napi is disabled r8152: avoid start_xmit to call napi_schedule during autosuspend net: dsa: Bring back device detaching in dsa_slave_suspend() net: phy: leds: Fix truncated LED trigger names net: phy: leds: Break dependency of phy.h on phy_led_triggers.h net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash net-next: ethernet: mediatek: change the compatible string Documentation: devicetree: change the mediatek ethernet compatible string bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status(). ... | 27 January 2017, 20:54:16 UTC |
| 3365135 | Linus Torvalds | 27 January 2017, 20:44:32 UTC | Merge tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs uodates from Darrick Wong: "I have some more fixes this week: better input validation, corruption avoidance, build fixes, memory leak fixes, and a couple from Christoph to avoid an ENOSPC failure. Summary: - Fix race conditions in the CoW code - Fix some incorrect input validation checks - Avoid crashing fs by running out of space when freeing inodes - Fix toctou race wrt whether or not an inode has an attr - Fix build error on arm - Fix page refcount corruption when readahead fails - Don't corrupt userspace in the bmap ioctl" * tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent quotacheck from overloading inode lru xfs: fix bmv_count confusion w/ shared extents xfs: clear _XBF_PAGES from buffers when readahead page xfs: extsize hints are not unlikely in xfs_bmap_btalloc xfs: remove racy hasattr check from attr ops xfs: use per-AG reservations for the finobt xfs: only update mount/resv fields on success in __xfs_ag_resv_init xfs: verify dirblocklog correctly xfs: fix COW writeback race | 27 January 2017, 20:44:32 UTC |
| 5906374 | Linus Torvalds | 27 January 2017, 20:41:46 UTC | Merge branch 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "Some fixes that we've collected from the list. We still have one more pending to nail down a regression in lzo compression, but I wanted to get this batch out the door" * 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove ->{get, set}_acl() from btrfs_dir_ro_inode_operations Btrfs: disable xattr operations on subvolume directories Btrfs: remove old tree_root case in btrfs_read_locked_inode() Btrfs: fix truncate down when no_holes feature is enabled Btrfs: Fix deadlock between direct IO and fast fsync btrfs: fix false enospc error when truncating heavily reflinked file | 27 January 2017, 20:41:46 UTC |
| 2fb78e8 | Linus Torvalds | 27 January 2017, 20:36:39 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A set of fixes for this series. This contains: - Set of fixes for the nvme target code - A revert of patch from this merge window, causing a regression with WRITE_SAME on iSCSI targets at least. - A fix for a use-after-free in the new O_DIRECT bdev code. - Two fixes for the xen-blkfront driver" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "sd: remove __data_len hack for WRITE SAME" nvme-fc: use blk_rq_nr_phys_segments nvmet-rdma: Fix missing dma sync to nvme data structures nvmet: Call fatal_error from keep-alive timout expiration nvmet: cancel fatal error and flush async work before free controller nvmet: delete controllers deletion upon subsystem release nvmet_fc: correct logic in disconnect queue LS handling block: fix use after free in __blkdev_direct_IO xen-blkfront: correct maximum segment accounting xen-blkfront: feature flags handling adjustments | 27 January 2017, 20:36:39 UTC |
| dd3b9f2 | Linus Torvalds | 27 January 2017, 20:29:30 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Second round of -rc fixes for 4.10. This -rc cycle has been slow for the rdma subsystem. I had already sent you the first batch before the Holiday break. After that, we kept only getting a few here or there. Up until this week, when I got a drop of 13 to one driver (qedr). So, here's the -rc patches I have. I currently have none held in reserve, so unless something new comes in, this is it until the next merge window opens. Summary: - series of iw_cxgb4 fixes to make it work with the drain cq API - one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem, rxe, and ipoib - one big series (13 patches) for the new qedr driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits) RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled IB/rxe: Prevent from completer to operate on non valid QP IB/rxe: Fix rxe dev insertion to rxe_dev_list IB/umem: Release pid in error and ODP flow RDMA/qedr: Dispatch port active event from qedr_add RDMA/qedr: Fix and simplify memory leak in PD alloc RDMA/qedr: Fix RDMA CM loopback RDMA/qedr: Fix formatting RDMA/qedr: Mark three functions as static RDMA/qedr: Don't reset QP when queues aren't flushed RDMA/qedr: Don't spam dmesg if QP is in error state RDMA/qedr: Remove CQ spinlock from CM completion handlers RDMA/qedr: Return max inline data in QP query result RDMA/qedr: Return success when not changing QP state RDMA/qedr: Add uapi header qedr-abi.h RDMA/qedr: Fix MTU returned from QP query RDMA/core: Add the function ib_mtu_int_to_enum IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path IB/vmw_pvrdma: Don't leak info from alloc_ucontext IB/cxgb3: fix misspelling in header guard ... | 27 January 2017, 20:29:30 UTC |
| 69978aa | Linus Torvalds | 27 January 2017, 20:25:26 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Another two bug fixes: - ptrace partial write information leak - a guest page hinting regression introduced with v4.6" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: Fix cmma unused transfer from pgste into pte s390/ptrace: Preserve previous registers for short regset write | 27 January 2017, 20:25:26 UTC |
| 2b43215 | Linus Torvalds | 27 January 2017, 20:17:07 UTC | Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "An ARM fix in the Xen SWIOTLB - mainly the translation of physical to bus addresses was done just a tad too late" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: update dev_addr after swapping pages | 27 January 2017, 20:17:07 UTC |
| 3aebae0 | Linus Torvalds | 27 January 2017, 20:10:58 UTC | Merge tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio Pull VFIO fix from Alex Williamson: "mdev IOMMU groups are not yet compatible with the powerpc SPAPR IOMMU backend, detect and fail group attach (Greg Kurz)" * tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio: vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null | 27 January 2017, 20:10:58 UTC |
| b4cfe39 | Jack Morgenstein | 15 January 2017, 18:15:00 UTC | RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled If IPV6 has not been enabled in the underlying kernel, we must avoid calling IPV6 procedures in rdma_cm.ko. This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements surrounding any code which calls external IPV6 procedures. In the instance fixed here, procedure cma_bind_addr() called ipv6_addr_type() -- which resulted in calling external procedure __ipv6_addr_type(). Fixes: 6c26a77124ff ("RDMA/cma: fix IPv6 address resolution") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> | 27 January 2017, 19:29:04 UTC |
| c14024d | Jens Axboe | 27 January 2017, 18:56:06 UTC | Merge branch 'stable/for-jens-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Konrad writes: Please pull in your 'for-linus' branch two little fixes for Xen block front: One fix is for handling the XEN_PAGE_SIZE != PAGE_SIZE (4KB vs 64KB on ARM for example) mishandling while the other is fixing the accounting for the configuration changes. | 27 January 2017, 18:56:06 UTC |
| 9aed02f | Vineet Gupta | 27 January 2017, 18:45:27 UTC | ARC: [arcompact] handle unaligned access delay slot corner case After emulating an unaligned access in delay slot of a branch, we pretend as the delay slot never happened - so return back to actual branch target (or next PC if branch was not taken). Curently we did this by handling STATUS32.DE, we also need to clear the BTA.T bit, which is disregarded when returning from original misaligned exception, but could cause weirdness if it took the interrupt return path (in case interrupt was acive too) One ARC700 customer ran into this when enabling unaligned access fixup for kernel mode accesses as well Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> | 27 January 2017, 18:54:20 UTC |
| 9d1d166 | Linus Torvalds | 27 January 2017, 18:29:33 UTC | Merge tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix a regression on tvp5150 causing failures at input selection and image glitches - CEC was moved out of staging for v4.10. Fix some bugs on it while not too late - fix a regression on pctv452e caused by VM stack changes - fix suspend issued with smiapp - fix a regression on cobalt driver - fix some warnings and Kconfig issues with some random configs. * tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5k4ecgx: select CRC32 helper [media] dvb: avoid warning in dvb_net [media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time [media] v4l: tvp5150: Fix comment regarding output pin muxing [media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers [media] pctv452e: move buffer to heap, no mutex [media] media/cobalt: use pci_irq_allocate_vectors [media] cec: fix race between configuring and unconfiguring [media] cec: move cec_report_phys_addr into cec_config_thread_func [media] cec: replace cec_report_features by cec_fill_msg_report_features [media] cec: update log_addr[] before finishing configuration [media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2 [media] cec: when canceling a message, don't overwrite old status info [media] cec: fix report_current_latency [media] smiapp: Make suspend and resume functions __maybe_unused [media] smiapp: Implement power-on and power-off sequences without runtime PM | 27 January 2017, 18:29:33 UTC |
| b84f027 | Linus Torvalds | 27 January 2017, 18:25:31 UTC | Merge tag 'mmc-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "MMC host: fix runtime PM resume path in dw_mmc" * tag 'mmc-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: force setup bus if active slots exist | 27 January 2017, 18:25:31 UTC |
| ed4d50c | Linus Torvalds | 27 January 2017, 18:22:00 UTC | Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fix from Zhang Rui: "A single revert from a recently introduced problem. Specifics: Commit 7611fb68062f ("thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"), which was introduced in 4.10-rc5, uses new hwmon API. But this breaks some soc thermal driver because the new hwmon API has a strict rule for the hwmon device name. Revert the offending commit as a quick solution for 4.10" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()" | 27 January 2017, 18:22:00 UTC |
| e0d76fa | Brian Foster | 26 January 2017, 21:18:09 UTC | xfs: prevent quotacheck from overloading inode lru Quotacheck runs at mount time in situations where quota accounting must be recalculated. In doing so, it uses bulkstat to visit every inode in the filesystem. Historically, every inode processed during quotacheck was released and immediately tagged for reclaim because quotacheck runs before the superblock is marked active by the VFS. In other words, the final iput() lead to an immediate ->destroy_inode() call, which allowed the XFS background reclaim worker to start reclaiming inodes. Commit 17c12bcd3 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped") marks the XFS superblock active sooner as part of the mount process to support caching inodes processed during log recovery. This occurs before quotacheck and thus means all inodes processed by quotacheck are inserted to the LRU on release. The s_umount lock is held until the mount has completed and thus prevents the shrinkers from operating on the sb. This means that quotacheck can excessively populate the inode LRU and lead to OOM conditions on systems without sufficient RAM. Update the quotacheck bulkstat handler to set XFS_IGET_DONTCACHE on inodes processed by quotacheck. This causes ->drop_inode() to return 1 and in turn causes iput_final() to evict the inode. This preserves the original quotacheck behavior and prevents it from overloading the LRU and running out of memory. CC: stable@vger.kernel.org # v4.9 Reported-by: Martin Svec <martin.svec@zoner.cz> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> | 27 January 2017, 17:32:30 UTC |
| 950eabb | Arnd Bergmann | 27 January 2017, 12:32:14 UTC | ISDN: eicon: silence misleading array-bounds warning With some gcc versions, we get a warning about the eicon driver, and that currently shows up as the only remaining warning in one of the build bots: In file included from ../drivers/isdn/hardware/eicon/message.c:30:0: eicon/message.c: In function 'mixer_notify_update': eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] The code is easily changed to open-code the unusual PUT_WORD() line causing this to avoid the warning. Cc: stable@vger.kernel.org Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 16:27:34 UTC |
| 9d162ed | Sean Nyekjaer | 27 January 2017, 07:46:23 UTC | net: phy: micrel: add support for KSZ8795 This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 16:10:50 UTC |
| 95120eb | David S. Miller | 27 January 2017, 15:39:10 UTC | Merge branch 'gtp-fixes' Andreas Schultz says: ==================== various gtp fixes I'm sorry for the compile error mess up in the last version. It's no excuse for not test compiling, but the hunks got lost in a rebase. This is the part of the previous "simple gtp improvements" series that Pablo indicated should go into net. The addition of the module alias fixes genl family autoloading, clearing the DF bit fixes a protocol violation in regard to the specification and the netns comparison fixes a corner case of cross netns recv. v2->v3: fix compiler error introduced in rebase ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 15:39:10 UTC |
| 3ab1b46 | Andreas Schultz | 27 January 2017, 09:40:58 UTC | gtp: fix cross netns recv on gtp socket The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation). Remove the now obsolete net field from gtp_dev. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 15:39:09 UTC |
| c6ce1d0 | Andreas Schultz | 27 January 2017, 09:40:57 UTC | gtp: clear DF bit on GTP packet tx 3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2: > Backbone router: Any router in the backbone may fragment the GTP > packet if needed, according to IPv4. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 15:39:09 UTC |
| ab72982 | Andreas Schultz | 27 January 2017, 09:40:56 UTC | gtp: add genl family modules alias Auto-load the module when userspace asks for the gtp netlink family. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 15:39:09 UTC |
| 92e55f4 | Pablo Neira | 26 January 2017, 21:56:21 UTC | tcp: don't annotate mark on control socket from tcp_v6_send_response() Unlike ipv4, this control socket is shared by all cpus so we cannot use it as scratchpad area to annotate the mark that we pass to ip6_xmit(). Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket family caches the flowi6 structure in the sctp_transport structure, so we cannot use to carry the mark unless we later on reset it back, which I discarded since it looks ugly to me. Fixes: bf99b4ded5f8 ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 January 2017, 15:33:56 UTC |
| 606f422 | Prashanth Prakash | 26 January 2017, 18:08:32 UTC | arm64: skip register_cpufreq_notifier on ACPI-based systems On ACPI based systems where the topology is setup using the API store_cpu_topology, at the moment we do not have necessary code to parse cpu capacity and handle cpufreq notifier, thus resulting in a kernel panic. Stack: init_cpu_capacity_callback+0xb4/0x1c8 notifier_call_chain+0x5c/0xa0 __blocking_notifier_call_chain+0x58/0xa0 blocking_notifier_call_chain+0x3c/0x50 cpufreq_set_policy+0xe4/0x328 cpufreq_init_policy+0x80/0x100 cpufreq_online+0x418/0x710 cpufreq_add_dev+0x118/0x180 subsys_interface_register+0xa4/0xf8 cpufreq_register_driver+0x1c0/0x298 cppc_cpufreq_init+0xdc/0x1000 [cppc_cpufreq] do_one_initcall+0x5c/0x168 do_init_module+0x64/0x1e4 load_module+0x130c/0x14d0 SyS_finit_module+0x108/0x120 el0_svc_naked+0x24/0x28 Fixes: 7202bde8b7ae ("arm64: parse cpu capacity-dmips-mhz from DT") Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 27 January 2017, 11:30:36 UTC |
