https://github.com/torvalds/linux
Revision 381c759d9916c42959515ad34a6d467e24a88e93 authored by Eric W. Biederman on 22 May 2015, 09:58:12 UTC, committed by David S. Miller on 22 May 2015, 18:23:40 UTC
ip_error does not check if in_dev is NULL before dereferencing it.

IThe following sequence of calls is possible:
CPU A                          CPU B
ip_rcv_finish
    ip_route_input_noref()
        ip_route_input_slow()
                               inetdev_destroy()
    dst_input()

With the result that a network device can be destroyed while processing
an input packet.

A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device.   The error condition
was created by the removal of the network device.

As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.

Therefore handle this weird case by just dropping the packet if
!in_dev.  It will result in dropping the packet sooner, and will not
result in an actual change of behavior.

Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent d654976
History
Tip revision: 381c759d9916c42959515ad34a6d467e24a88e93 authored by Eric W. Biederman on 22 May 2015, 09:58:12 UTC
ipv4: Avoid crashing in ip_error
Tip revision: 381c759
File Mode Size
Documentation
arch
block
crypto
drivers
firmware
fs
include
init
ipc
kernel
lib
mm
net
samples
scripts
security
sound
tools
usr
virt
.gitignore -rw-r--r-- 1.2 KB
.mailmap -rw-r--r-- 4.9 KB
COPYING -rw-r--r-- 18.3 KB
CREDITS -rw-r--r-- 94.7 KB
Kbuild -rw-r--r-- 2.1 KB
Kconfig -rw-r--r-- 252 bytes
MAINTAINERS -rw-r--r-- 302.8 KB
Makefile -rw-r--r-- 53.1 KB
README -rw-r--r-- 18.2 KB
REPORTING-BUGS -rw-r--r-- 7.3 KB

README

back to top