Revision 3822d0670c9d4342794d73e0d0e615322b40438e authored by Rahul Lakkireddy on 04 June 2021, 11:18:18 UTC, committed by David S. Miller on 04 June 2021, 21:45:13 UTC
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 944d671
arc4.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Cryptographic API
*
* ARC4 Cipher Algorithm
*
* Jon Oberheide <jon@oberheide.org>
*/
#include <crypto/algapi.h>
#include <crypto/arc4.h>
#include <crypto/internal/skcipher.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
static int crypto_arc4_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
unsigned int key_len)
{
struct arc4_ctx *ctx = crypto_skcipher_ctx(tfm);
return arc4_setkey(ctx, in_key, key_len);
}
static int crypto_arc4_crypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct arc4_ctx *ctx = crypto_skcipher_ctx(tfm);
struct skcipher_walk walk;
int err;
err = skcipher_walk_virt(&walk, req, false);
while (walk.nbytes > 0) {
arc4_crypt(ctx, walk.dst.virt.addr, walk.src.virt.addr,
walk.nbytes);
err = skcipher_walk_done(&walk, 0);
}
return err;
}
static int crypto_arc4_init(struct crypto_skcipher *tfm)
{
pr_warn_ratelimited("\"%s\" (%ld) uses obsolete ecb(arc4) skcipher\n",
current->comm, (unsigned long)current->pid);
return 0;
}
static struct skcipher_alg arc4_alg = {
/*
* For legacy reasons, this is named "ecb(arc4)", not "arc4".
* Nevertheless it's actually a stream cipher, not a block cipher.
*/
.base.cra_name = "ecb(arc4)",
.base.cra_driver_name = "ecb(arc4)-generic",
.base.cra_priority = 100,
.base.cra_blocksize = ARC4_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct arc4_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = ARC4_MIN_KEY_SIZE,
.max_keysize = ARC4_MAX_KEY_SIZE,
.setkey = crypto_arc4_setkey,
.encrypt = crypto_arc4_crypt,
.decrypt = crypto_arc4_crypt,
.init = crypto_arc4_init,
};
static int __init arc4_init(void)
{
return crypto_register_skcipher(&arc4_alg);
}
static void __exit arc4_exit(void)
{
crypto_unregister_skcipher(&arc4_alg);
}
subsys_initcall(arc4_init);
module_exit(arc4_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ARC4 Cipher Algorithm");
MODULE_AUTHOR("Jon Oberheide <jon@oberheide.org>");
MODULE_ALIAS_CRYPTO("ecb(arc4)");
Computing file changes ...