Revision 3822d0670c9d4342794d73e0d0e615322b40438e authored by Rahul Lakkireddy on 04 June 2021, 11:18:18 UTC, committed by David S. Miller on 04 June 2021, 21:45:13 UTC
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 944d671
dh_helper.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2016, Intel Corporation
* Authors: Salvatore Benedetto <salvatore.benedetto@intel.com>
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/err.h>
#include <linux/string.h>
#include <crypto/dh.h>
#include <crypto/kpp.h>
#define DH_KPP_SECRET_MIN_SIZE (sizeof(struct kpp_secret) + 4 * sizeof(int))
static inline u8 *dh_pack_data(u8 *dst, u8 *end, const void *src, size_t size)
{
if (!dst || size > end - dst)
return NULL;
memcpy(dst, src, size);
return dst + size;
}
static inline const u8 *dh_unpack_data(void *dst, const void *src, size_t size)
{
memcpy(dst, src, size);
return src + size;
}
static inline unsigned int dh_data_size(const struct dh *p)
{
return p->key_size + p->p_size + p->q_size + p->g_size;
}
unsigned int crypto_dh_key_len(const struct dh *p)
{
return DH_KPP_SECRET_MIN_SIZE + dh_data_size(p);
}
EXPORT_SYMBOL_GPL(crypto_dh_key_len);
int crypto_dh_encode_key(char *buf, unsigned int len, const struct dh *params)
{
u8 *ptr = buf;
u8 * const end = ptr + len;
struct kpp_secret secret = {
.type = CRYPTO_KPP_SECRET_TYPE_DH,
.len = len
};
if (unlikely(!len))
return -EINVAL;
ptr = dh_pack_data(ptr, end, &secret, sizeof(secret));
ptr = dh_pack_data(ptr, end, ¶ms->key_size,
sizeof(params->key_size));
ptr = dh_pack_data(ptr, end, ¶ms->p_size, sizeof(params->p_size));
ptr = dh_pack_data(ptr, end, ¶ms->q_size, sizeof(params->q_size));
ptr = dh_pack_data(ptr, end, ¶ms->g_size, sizeof(params->g_size));
ptr = dh_pack_data(ptr, end, params->key, params->key_size);
ptr = dh_pack_data(ptr, end, params->p, params->p_size);
ptr = dh_pack_data(ptr, end, params->q, params->q_size);
ptr = dh_pack_data(ptr, end, params->g, params->g_size);
if (ptr != end)
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(crypto_dh_encode_key);
int crypto_dh_decode_key(const char *buf, unsigned int len, struct dh *params)
{
const u8 *ptr = buf;
struct kpp_secret secret;
if (unlikely(!buf || len < DH_KPP_SECRET_MIN_SIZE))
return -EINVAL;
ptr = dh_unpack_data(&secret, ptr, sizeof(secret));
if (secret.type != CRYPTO_KPP_SECRET_TYPE_DH)
return -EINVAL;
ptr = dh_unpack_data(¶ms->key_size, ptr, sizeof(params->key_size));
ptr = dh_unpack_data(¶ms->p_size, ptr, sizeof(params->p_size));
ptr = dh_unpack_data(¶ms->q_size, ptr, sizeof(params->q_size));
ptr = dh_unpack_data(¶ms->g_size, ptr, sizeof(params->g_size));
if (secret.len != crypto_dh_key_len(params))
return -EINVAL;
/*
* Don't permit the buffer for 'key' or 'g' to be larger than 'p', since
* some drivers assume otherwise.
*/
if (params->key_size > params->p_size ||
params->g_size > params->p_size || params->q_size > params->p_size)
return -EINVAL;
/* Don't allocate memory. Set pointers to data within
* the given buffer
*/
params->key = (void *)ptr;
params->p = (void *)(ptr + params->key_size);
params->q = (void *)(ptr + params->key_size + params->p_size);
params->g = (void *)(ptr + params->key_size + params->p_size +
params->q_size);
/*
* Don't permit 'p' to be 0. It's not a prime number, and it's subject
* to corner cases such as 'mod 0' being undefined or
* crypto_kpp_maxsize() returning 0.
*/
if (memchr_inv(params->p, 0, params->p_size) == NULL)
return -EINVAL;
/* It is permissible to not provide Q. */
if (params->q_size == 0)
params->q = NULL;
return 0;
}
EXPORT_SYMBOL_GPL(crypto_dh_decode_key);
Computing file changes ...