Revision 3822d0670c9d4342794d73e0d0e615322b40438e authored by Rahul Lakkireddy on 04 June 2021, 11:18:18 UTC, committed by David S. Miller on 04 June 2021, 21:45:13 UTC
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 944d671
jitterentropy-kcapi.c
/*
* Non-physical true random number generator based on timing jitter --
* Linux Kernel Crypto API specific code
*
* Copyright Stephan Mueller <smueller@chronox.de>, 2015
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, and the entire permission notice in its entirety,
* including the disclaimer of warranties.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* ALTERNATIVELY, this product may be distributed under the terms of
* the GNU General Public License, in which case the provisions of the GPL2 are
* required INSTEAD OF the above restrictions. (This clause is
* necessary due to a potential bad interaction between the GPL and
* the restrictions contained in a BSD-style copyright.)
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF
* WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/fips.h>
#include <linux/time.h>
#include <crypto/internal/rng.h>
#include "jitterentropy.h"
/***************************************************************************
* Helper function
***************************************************************************/
void *jent_zalloc(unsigned int len)
{
return kzalloc(len, GFP_KERNEL);
}
void jent_zfree(void *ptr)
{
kfree_sensitive(ptr);
}
int jent_fips_enabled(void)
{
return fips_enabled;
}
void jent_panic(char *s)
{
panic("%s", s);
}
void jent_memcpy(void *dest, const void *src, unsigned int n)
{
memcpy(dest, src, n);
}
/*
* Obtain a high-resolution time stamp value. The time stamp is used to measure
* the execution time of a given code path and its variations. Hence, the time
* stamp must have a sufficiently high resolution.
*
* Note, if the function returns zero because a given architecture does not
* implement a high-resolution time stamp, the RNG code's runtime test
* will detect it and will not produce output.
*/
void jent_get_nstime(__u64 *out)
{
__u64 tmp = 0;
tmp = random_get_entropy();
/*
* If random_get_entropy does not return a value, i.e. it is not
* implemented for a given architecture, use a clock source.
* hoping that there are timers we can work with.
*/
if (tmp == 0)
tmp = ktime_get_ns();
*out = tmp;
}
/***************************************************************************
* Kernel crypto API interface
***************************************************************************/
struct jitterentropy {
spinlock_t jent_lock;
struct rand_data *entropy_collector;
unsigned int reset_cnt;
};
static int jent_kcapi_init(struct crypto_tfm *tfm)
{
struct jitterentropy *rng = crypto_tfm_ctx(tfm);
int ret = 0;
rng->entropy_collector = jent_entropy_collector_alloc(1, 0);
if (!rng->entropy_collector)
ret = -ENOMEM;
spin_lock_init(&rng->jent_lock);
return ret;
}
static void jent_kcapi_cleanup(struct crypto_tfm *tfm)
{
struct jitterentropy *rng = crypto_tfm_ctx(tfm);
spin_lock(&rng->jent_lock);
if (rng->entropy_collector)
jent_entropy_collector_free(rng->entropy_collector);
rng->entropy_collector = NULL;
spin_unlock(&rng->jent_lock);
}
static int jent_kcapi_random(struct crypto_rng *tfm,
const u8 *src, unsigned int slen,
u8 *rdata, unsigned int dlen)
{
struct jitterentropy *rng = crypto_rng_ctx(tfm);
int ret = 0;
spin_lock(&rng->jent_lock);
/* Return a permanent error in case we had too many resets in a row. */
if (rng->reset_cnt > (1<<10)) {
ret = -EFAULT;
goto out;
}
ret = jent_read_entropy(rng->entropy_collector, rdata, dlen);
/* Reset RNG in case of health failures */
if (ret < -1) {
pr_warn_ratelimited("Reset Jitter RNG due to health test failure: %s failure\n",
(ret == -2) ? "Repetition Count Test" :
"Adaptive Proportion Test");
rng->reset_cnt++;
ret = -EAGAIN;
} else {
rng->reset_cnt = 0;
/* Convert the Jitter RNG error into a usable error code */
if (ret == -1)
ret = -EINVAL;
}
out:
spin_unlock(&rng->jent_lock);
return ret;
}
static int jent_kcapi_reset(struct crypto_rng *tfm,
const u8 *seed, unsigned int slen)
{
return 0;
}
static struct rng_alg jent_alg = {
.generate = jent_kcapi_random,
.seed = jent_kcapi_reset,
.seedsize = 0,
.base = {
.cra_name = "jitterentropy_rng",
.cra_driver_name = "jitterentropy_rng",
.cra_priority = 100,
.cra_ctxsize = sizeof(struct jitterentropy),
.cra_module = THIS_MODULE,
.cra_init = jent_kcapi_init,
.cra_exit = jent_kcapi_cleanup,
}
};
static int __init jent_mod_init(void)
{
int ret = 0;
ret = jent_entropy_init();
if (ret) {
pr_info("jitterentropy: Initialization failed with host not compliant with requirements: %d\n", ret);
return -EFAULT;
}
return crypto_register_rng(&jent_alg);
}
static void __exit jent_mod_exit(void)
{
crypto_unregister_rng(&jent_alg);
}
module_init(jent_mod_init);
module_exit(jent_mod_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Stephan Mueller <smueller@chronox.de>");
MODULE_DESCRIPTION("Non-physical True Random Number Generator based on CPU Jitter");
MODULE_ALIAS_CRYPTO("jitterentropy_rng");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...