Revision 3822d0670c9d4342794d73e0d0e615322b40438e authored by Rahul Lakkireddy on 04 June 2021, 11:18:18 UTC, committed by David S. Miller on 04 June 2021, 21:45:13 UTC
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 944d671
ofb.c
// SPDX-License-Identifier: GPL-2.0
/*
* OFB: Output FeedBack mode
*
* Copyright (C) 2018 ARM Limited or its affiliates.
* All rights reserved.
*/
#include <crypto/algapi.h>
#include <crypto/internal/cipher.h>
#include <crypto/internal/skcipher.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
static int crypto_ofb_crypt(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
struct crypto_cipher *cipher = skcipher_cipher_simple(tfm);
const unsigned int bsize = crypto_cipher_blocksize(cipher);
struct skcipher_walk walk;
int err;
err = skcipher_walk_virt(&walk, req, false);
while (walk.nbytes >= bsize) {
const u8 *src = walk.src.virt.addr;
u8 *dst = walk.dst.virt.addr;
u8 * const iv = walk.iv;
unsigned int nbytes = walk.nbytes;
do {
crypto_cipher_encrypt_one(cipher, iv, iv);
crypto_xor_cpy(dst, src, iv, bsize);
dst += bsize;
src += bsize;
} while ((nbytes -= bsize) >= bsize);
err = skcipher_walk_done(&walk, nbytes);
}
if (walk.nbytes) {
crypto_cipher_encrypt_one(cipher, walk.iv, walk.iv);
crypto_xor_cpy(walk.dst.virt.addr, walk.src.virt.addr, walk.iv,
walk.nbytes);
err = skcipher_walk_done(&walk, 0);
}
return err;
}
static int crypto_ofb_create(struct crypto_template *tmpl, struct rtattr **tb)
{
struct skcipher_instance *inst;
struct crypto_alg *alg;
int err;
inst = skcipher_alloc_instance_simple(tmpl, tb);
if (IS_ERR(inst))
return PTR_ERR(inst);
alg = skcipher_ialg_simple(inst);
/* OFB mode is a stream cipher. */
inst->alg.base.cra_blocksize = 1;
/*
* To simplify the implementation, configure the skcipher walk to only
* give a partial block at the very end, never earlier.
*/
inst->alg.chunksize = alg->cra_blocksize;
inst->alg.encrypt = crypto_ofb_crypt;
inst->alg.decrypt = crypto_ofb_crypt;
err = skcipher_register_instance(tmpl, inst);
if (err)
inst->free(inst);
return err;
}
static struct crypto_template crypto_ofb_tmpl = {
.name = "ofb",
.create = crypto_ofb_create,
.module = THIS_MODULE,
};
static int __init crypto_ofb_module_init(void)
{
return crypto_register_template(&crypto_ofb_tmpl);
}
static void __exit crypto_ofb_module_exit(void)
{
crypto_unregister_template(&crypto_ofb_tmpl);
}
subsys_initcall(crypto_ofb_module_init);
module_exit(crypto_ofb_module_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("OFB block cipher mode of operation");
MODULE_ALIAS_CRYPTO("ofb");
MODULE_IMPORT_NS(CRYPTO_INTERNAL);
Computing file changes ...