Revision 39ada88f9c862c1ff8929ff67e0d1199c7af73fe authored by Ard Biesheuvel on 13 August 2020, 17:38:17 UTC, committed by Ard Biesheuvel on 20 August 2020, 09:18:36 UTC
Now that the old memmap code has been removed, some code that was left behind in arch/x86/platform/efi/efi.c is only used for 32-bit builds, which means it can live in efi_32.c as well. So move it over. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
1 parent 8a8a323
mpc52xx.rst
=============================
Linux 2.6.x on MPC52xx family
=============================
For the latest info, go to https://www.246tNt.com/mpc52xx/
To compile/use :
- U-Boot::
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
# make uImage
then, on U-boot:
=> tftpboot 200000 uImage
=> tftpboot 400000 pRamdisk
=> bootm 200000 400000
- DBug::
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
# cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
# make zImage.initrd
# make
then in DBug:
DBug> dn -i zImage.initrd.lite5200
Some remarks:
- The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
is not supported, and I'm not sure anyone is interesting in working on it
so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
nothing to do with the MPC5200. I also included the 'MPC' for the same
reason.
- Of course, I inspired myself from the 2.4 port. If you think I forgot to
mention you/your company in the copyright of some code, I'll correct it
ASAP.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...