3d7158e | Bryna Hazelton | 23 February 2018, 17:19:34 UTC | fix docstring and overwrite handling | 23 February 2018, 21:41:05 UTC |
71fa967 | Bryna Hazelton | 23 February 2018, 17:14:53 UTC | decrease max ant number to 254, pep8 fixes CASA can't handle antenna numbers above 254 | 23 February 2018, 21:41:05 UTC |
32fb77a | Bryna Hazelton | 23 February 2018, 01:24:01 UTC | only overwrite if overwrite keyword is set | 23 February 2018, 21:41:05 UTC |
bda3fa5 | Bryna Hazelton | 23 February 2018, 01:17:16 UTC | Add a script to renumber antennas to below 256 in uvfits files | 23 February 2018, 21:41:05 UTC |
372a60e | Adam Beardsley | 21 February 2018, 00:07:17 UTC | fixing jones ordering in uvcal add | 21 February 2018, 04:08:13 UTC |
6c37783 | Adam Beardsley | 21 February 2018, 00:06:54 UTC | Adding tests for uvcal and uvbeam | 21 February 2018, 04:08:13 UTC |
e93909f | Adam Beardsley | 20 February 2018, 20:01:33 UTC | reorder when reordering should be done. | 21 February 2018, 04:08:13 UTC |
d18b407 | Adam Beardsley | 20 February 2018, 19:44:13 UTC | Adding tests that currently fail | 21 February 2018, 04:08:13 UTC |
92b3473 | Nicholas Kern | 08 February 2018, 21:51:16 UTC | pep8 issue on miriad_to_uvfits.py | 09 February 2018, 18:44:14 UTC |
dc53ba5 | Nicholas Kern | 08 February 2018, 21:38:09 UTC | updated miriad_to_uvfits.py using argparse and to optionally phase data to specified time | 09 February 2018, 18:44:14 UTC |
1581c94 | Bryna Hazelton | 07 February 2018, 17:59:40 UTC | Better comments for warnings on reading IDL save files. | 07 February 2018, 21:13:15 UTC |
1ae3218 | Bryna Hazelton | 07 February 2018, 17:43:02 UTC | Add docstring for get_fhd_history | 07 February 2018, 21:13:15 UTC |
99289e8 | Bryna Hazelton | 01 February 2018, 22:38:21 UTC | Fix case where cal 'delays' is None | 07 February 2018, 21:13:15 UTC |
8f7c58b | Bryna Hazelton | 01 February 2018, 21:11:22 UTC | improve test coverage, small bug fixes | 07 February 2018, 21:13:15 UTC |
9bfe33e | Bryna Hazelton | 01 February 2018, 19:27:26 UTC | Add more tests and test data | 07 February 2018, 21:13:15 UTC |
4d6a5a5 | Bryna Hazelton | 01 February 2018, 19:23:11 UTC | fix npol handling in truncate_fhd_files | 07 February 2018, 21:13:15 UTC |
03f6873 | Bryna Hazelton | 01 February 2018, 18:35:46 UTC | fix npol handling in truncate_fhd_files | 07 February 2018, 21:13:15 UTC |
ab13b01 | Bryna Hazelton | 01 February 2018, 18:33:48 UTC | more fixes for truncate_fhd_files | 07 February 2018, 21:13:15 UTC |
65d0492 | Bryna Hazelton | 31 January 2018, 21:28:05 UTC | more tweaks to truncate_fhd_files | 07 February 2018, 21:13:15 UTC |
34fb6c0 | Bryna Hazelton | 31 January 2018, 20:00:15 UTC | add flexibility to truncate_fhd_files to make more varied test files | 07 February 2018, 21:13:15 UTC |
c8b13d7 | Bryna Hazelton | 31 January 2018, 19:59:45 UTC | improve test coverage | 07 February 2018, 21:13:15 UTC |
7826664 | Bryna Hazelton | 31 January 2018, 19:24:13 UTC | improve test coverage | 07 February 2018, 21:13:15 UTC |
afb41f9 | Bryna Hazelton | 31 January 2018, 18:40:27 UTC | make a single function to get fhd history, addresses issue #36 | 07 February 2018, 21:13:15 UTC |
6868aa9 | Bryna Hazelton | 31 January 2018, 05:40:32 UTC | Add the test files, fix up the tests | 07 February 2018, 21:13:15 UTC |
bc20c4c | Bryna Hazelton | 31 January 2018, 05:39:25 UTC | truncate the source list too | 07 February 2018, 21:13:15 UTC |
0a109ea | Bryna Hazelton | 31 January 2018, 05:18:48 UTC | bug fix | 07 February 2018, 21:13:15 UTC |
e9d37c3 | Bryna Hazelton | 31 January 2018, 05:17:01 UTC | fix tile_use in obs structure | 07 February 2018, 21:13:15 UTC |
d6e1d05 | Bryna Hazelton | 31 January 2018, 05:15:23 UTC | bug fix | 07 February 2018, 21:13:15 UTC |
45f91fc | Bryna Hazelton | 31 January 2018, 05:10:45 UTC | fix array length bug | 07 February 2018, 21:13:15 UTC |
73d055e | Bryna Hazelton | 31 January 2018, 05:03:21 UTC | add stuff for cals | 07 February 2018, 21:13:15 UTC |
3cb27d6 | Bryna Hazelton | 31 January 2018, 02:47:16 UTC | get first fhd cal test working | 07 February 2018, 21:13:15 UTC |
b1e1a31 | Bryna Hazelton | 31 January 2018, 01:05:01 UTC | finish initial fhd cal read | 07 February 2018, 21:13:15 UTC |
c6f5f43 | Bryna Hazelton | 30 January 2018, 20:30:08 UTC | progress on reading fhd calibrations solutions | 07 February 2018, 21:13:15 UTC |
985ccdc | Bryna Hazelton | 25 January 2018, 23:06:44 UTC | Start work on function to read fhd cal.sav files | 07 February 2018, 21:13:15 UTC |
575911b | Bryna Hazelton | 31 January 2018, 22:07:32 UTC | Fix incorrect docstring on set_redundant method | 07 February 2018, 17:39:57 UTC |
5939016 | Bryna Hazelton | 31 January 2018, 18:20:57 UTC | Remove redundant cal_style definition, fix comment typo | 31 January 2018, 18:33:57 UTC |
d89e447 | Bryna Hazelton | 31 January 2018, 02:50:40 UTC | fix tutorial | 31 January 2018, 18:33:57 UTC |
83b51af | Bryna Hazelton | 31 January 2018, 02:50:25 UTC | fix handling of baseline_range in calfits | 31 January 2018, 18:33:57 UTC |
4719ffd | Bryna Hazelton | 31 January 2018, 00:49:54 UTC | Add new cal parameters to address issue #289 | 31 January 2018, 18:33:57 UTC |
e3c4f92 | Bryna Hazelton | 26 January 2018, 05:16:06 UTC | fix some print formatting for new numpy | 27 January 2018, 00:11:02 UTC |
96efebb | Bryna Hazelton | 26 January 2018, 02:25:35 UTC | Handle new numpy/scipy deprecation warnings properly | 27 January 2018, 00:11:02 UTC |
32cd4d6 | Bryna Hazelton | 20 December 2017, 17:48:17 UTC | raise error if the efield beam has 3 vectors, minor cleanup | 21 December 2017, 18:27:01 UTC |
da677ee | Bryna Hazelton | 20 December 2017, 17:16:52 UTC | remove extraneous assert | 21 December 2017, 18:27:01 UTC |
8462da6 | Bryna Hazelton | 20 December 2017, 08:49:33 UTC | improve test coverage | 21 December 2017, 18:27:01 UTC |
96c80e3 | Bryna Hazelton | 20 December 2017, 00:58:22 UTC | remove debugging print statements from test code | 21 December 2017, 18:27:01 UTC |
633fa20 | Bryna Hazelton | 20 December 2017, 00:49:18 UTC | fix basis vector rotation test | 21 December 2017, 18:27:01 UTC |
d822575 | Bryna Hazelton | 20 December 2017, 00:26:59 UTC | fix efield to power conversion for rotated and non-orthogonal bases | 21 December 2017, 18:27:01 UTC |
bde0817 | Bryna Hazelton | 16 December 2017, 19:55:00 UTC | Fix doctest bug | 21 December 2017, 18:27:01 UTC |
7416a2a | Bryna Hazelton | 16 December 2017, 19:06:47 UTC | bug fix | 21 December 2017, 18:27:01 UTC |
b50bb43 | Bryna Hazelton | 16 December 2017, 00:41:27 UTC | Add conversion examples to tutorial | 21 December 2017, 18:27:01 UTC |
25012b6 | Bryna Hazelton | 15 December 2017, 23:22:02 UTC | Add efield_to_power method on uvbeam, fix some bugs exposed by this | 21 December 2017, 18:27:01 UTC |
89f9437 | Bryna Hazelton | 15 December 2017, 05:50:45 UTC | improve test coverage | 18 December 2017, 20:52:09 UTC |
0ed3ebf | Bryna Hazelton | 15 December 2017, 03:47:05 UTC | add in optional params for test coverage | 18 December 2017, 20:52:09 UTC |
0b92fa2 | Bryna Hazelton | 15 December 2017, 03:28:21 UTC | testing speedups, eliminate duplicate tests | 18 December 2017, 20:52:09 UTC |
c1a882a | Bryna Hazelton | 15 December 2017, 02:46:21 UTC | major testing reorganization to speed up tests | 18 December 2017, 20:52:09 UTC |
d19ce9c | Bryna Hazelton | 14 December 2017, 08:26:00 UTC | more testing improvements | 18 December 2017, 20:52:09 UTC |
97e1388 | Bryna Hazelton | 14 December 2017, 04:11:32 UTC | Base testing more off real beam files to address #198 | 18 December 2017, 20:52:09 UTC |
b243743 | Bryna Hazelton | 07 December 2017, 03:31:39 UTC | simplify travis installs | 15 December 2017, 03:48:13 UTC |
042b627 | Bryna Hazelton | 07 December 2017, 03:22:46 UTC | Add ignore for line length test | 15 December 2017, 03:48:13 UTC |
17b296b | Bryna Hazelton | 07 December 2017, 03:09:12 UTC | install pycodestyle in Travis before calling it | 15 December 2017, 03:48:13 UTC |
2271973 | Bryna Hazelton | 07 December 2017, 02:56:40 UTC | Add pycodestyle check to travis | 15 December 2017, 03:48:13 UTC |
2325220 | Nicholas Kern | 06 December 2017, 20:25:02 UTC | updated pyuvdata_inspect try except statement | 06 December 2017, 21:08:51 UTC |
4d6b899 | Nicholas Kern | 02 December 2017, 05:40:24 UTC | updated bare except statement in pyuvdata_inspect.py modified: pyuvdata_inspect.py | 06 December 2017, 21:08:51 UTC |
e5da3d0 | Bryna Hazelton | 29 November 2017, 23:28:32 UTC | pep8 fixes after rebase | 06 December 2017, 21:08:51 UTC |
f916a67 | Bryna Hazelton | 28 November 2017, 22:33:24 UTC | pep8 fixes | 06 December 2017, 21:08:51 UTC |
7fded29 | Bryna Hazelton | 01 December 2017, 00:42:08 UTC | Add a note to the history when converting delays to gains | 06 December 2017, 20:14:01 UTC |
1a3bf03 | Bryna Hazelton | 30 November 2017, 23:07:08 UTC | improve description | 01 December 2017, 00:18:19 UTC |
07eb9fd | Bryna Hazelton | 30 November 2017, 22:53:08 UTC | Improve extra_keyword parameter descriptions | 01 December 2017, 00:18:19 UTC |
dfe0597 | Bryna Hazelton | 30 November 2017, 22:48:40 UTC | remove extraneous comments | 01 December 2017, 00:18:19 UTC |
35a90f2 | Bryna Hazelton | 30 November 2017, 20:25:34 UTC | improve test coverage and code cleanup | 01 December 2017, 00:18:19 UTC |
72c82aa | Bryna Hazelton | 30 November 2017, 19:51:54 UTC | add test coverage | 01 December 2017, 00:18:19 UTC |
9fcd017 | Bryna Hazelton | 30 November 2017, 18:44:04 UTC | Adding testing | 01 December 2017, 00:18:19 UTC |
e974982 | Bryna Hazelton | 29 November 2017, 22:45:49 UTC | update uvbeam check methods for extra keywords and parameters | 01 December 2017, 00:18:19 UTC |
debf31b | Bryna Hazelton | 29 November 2017, 22:43:19 UTC | Add extra_keywords to uvcal and support in calfits | 01 December 2017, 00:18:19 UTC |
bd6a2ab | jburba | 29 November 2017, 19:35:43 UTC | Surpressed warnings in test_uvdata.py | 29 November 2017, 23:18:41 UTC |
7021969 | jburba | 29 November 2017, 19:34:07 UTC | Warnings for ant(s) and pol(s) now printed at end in one message each | 29 November 2017, 23:18:41 UTC |
09a74ba | Nicholas Kern | 17 November 2017, 19:27:27 UTC | added get_ENU_antpos() to tutorial | 18 November 2017, 06:23:46 UTC |
ff8bb90 | Nicholas Kern | 16 November 2017, 20:11:41 UTC | moved get_ENU_from_UVData from utils into get_ENU_antpos in UVData modified: tests/test_utils.py modified: tests/test_uvdata.py modified: utils.py modified: uvdata.py | 18 November 2017, 06:23:46 UTC |
60e2845 | Nicholas Kern | 16 November 2017, 18:48:06 UTC | updated get_ENU_from_UVData modified: utils.py | 18 November 2017, 06:23:46 UTC |
7e89d66 | Nicholas Kern | 15 November 2017, 22:47:07 UTC | updated test in test_utils | 18 November 2017, 06:23:46 UTC |
de402d8 | Nicholas Kern | 15 November 2017, 22:33:04 UTC | added get_ENU_from_UVData to utils.py w/ tests modified: tests/test_utils.py modified: utils.py | 18 November 2017, 06:23:46 UTC |
560e1eb | jburba | 15 November 2017, 20:18:46 UTC | More tutorial formatting and update select description | 16 November 2017, 17:43:51 UTC |
9540b3f | jburba | 15 November 2017, 15:51:23 UTC | Tutorial fix | 16 November 2017, 17:43:51 UTC |
3e17f53 | jburba | 15 November 2017, 15:49:08 UTC | Updating tutorial formatting | 16 November 2017, 17:43:51 UTC |
89bbc7d | Jacob Burba | 10 November 2017, 16:58:07 UTC | Moved plottinf output formatting to branch parse_ants_plotting | 16 November 2017, 17:43:51 UTC |
c1a00a7 | Jacob Burba | 09 November 2017, 19:37:41 UTC | Plotting output now in dictionary format | 16 November 2017, 17:43:51 UTC |
ce9b49e | Jacob Burba | 04 October 2017, 20:16:51 UTC | Added more tests and cleaned up | 16 November 2017, 17:43:51 UTC |
7df72fa | Jacob Burba | 24 July 2017, 16:08:55 UTC | fixed typo in title | 16 November 2017, 17:43:51 UTC |
bdc408e | Jacob Burba | 19 July 2017, 19:37:49 UTC | clean up parse_ants, pep8, add print toggle for user debugging | 16 November 2017, 17:43:51 UTC |
5b7ae52 | Jacob Burba | 19 July 2017, 19:36:38 UTC | Separated tests for parsing and passing to select | 16 November 2017, 17:43:51 UTC |
bf73641 | Jacob Burba | 19 July 2017, 19:35:14 UTC | Hopefully last tutorial update | 16 November 2017, 17:43:51 UTC |
b338b56 | Jacob Burba | 18 July 2017, 02:10:44 UTC | updating tutorial | 16 November 2017, 17:43:51 UTC |
f27d36f | Jacob Burba | 17 July 2017, 23:13:54 UTC | changing tutorial formatting | 16 November 2017, 17:43:51 UTC |
4421aa7 | Jacob Burba | 17 July 2017, 23:12:41 UTC | Adding ant_str examples to tutorial | 16 November 2017, 17:43:51 UTC |
242e853 | Jacob Burba | 17 July 2017, 18:24:20 UTC | Added tests for new functionality of minus sign and passing ant_str w/ ant_pairs_nums and polarizations | 16 November 2017, 17:43:51 UTC |
789110f | Jacob Burba | 17 July 2017, 18:23:30 UTC | added check if tuple or tuple[::-1] in ant_pairs_nums in select | 16 November 2017, 17:43:51 UTC |
b263ab1 | Jacob Burba | 17 July 2017, 18:01:12 UTC | Correct behavior in parse_ants with - present | 16 November 2017, 17:43:51 UTC |
71b52bf | Jacob Burba | 14 July 2017, 23:16:17 UTC | parse_ants now causes an error in select if ant_str='auto' and no auto-correlations are present in the object | 16 November 2017, 17:43:51 UTC |
4e7718a | Jacob Burba | 14 July 2017, 23:12:33 UTC | cleaning parse_ants, now accepts capitalizated strings w/o polarizations | 16 November 2017, 17:43:51 UTC |
5b8446f | Jacob Burba | 13 July 2017, 20:42:04 UTC | corrected behavior of minus sign in parse_ants; added check if ant_pair in self.get_antpairs() | 16 November 2017, 17:43:51 UTC |