Revision 3d90fdba0197d56e7ccef95b6ea598b131bc3e30 authored by Andrey Chernov on 16 September 2000, 22:26:07 UTC, committed by Andrey Chernov on 16 September 2000, 22:26:07 UTC
1 parent f6689e8
Makefile.inc1
#
# $FreeBSD$
#
# Make command line options:
# -DMAKE_KERBEROS4 to build KerberosIV
# -DMAKE_KERBEROS5 to build Kerberos5
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOCRYPT will prevent building of crypt versions
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
# -DNO_FORTRAN do not build g77 and related libraries.
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(${.CURDIR}/share/info)
SUBDIR+= share/info
.endif
# We must do include and lib early so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(${.CURDIR}/include)
SUBDIR+= include
.endif
.if exists(${.CURDIR}/lib)
SUBDIR+= lib
.endif
.if exists(${.CURDIR}/bin)
SUBDIR+= bin
.endif
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(${.CURDIR}/gnu)
SUBDIR+= gnu
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
SUBDIR+= kerberos5
.endif
.if exists(${.CURDIR}/libexec)
SUBDIR+= libexec
.endif
.if exists(${.CURDIR}/sbin)
SUBDIR+= sbin
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(${.CURDIR}/sys)
SUBDIR+= sys
.endif
.if exists(${.CURDIR}/usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(${.CURDIR}/usr.sbin)
SUBDIR+= usr.sbin
.endif
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
# etc must be last for "distribute" to work
.if exists(${.CURDIR}/etc)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
.if defined(NOCLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
SUP?= cvsup
SUPFLAGS?= -g -L 2 -P -
.if defined(SUPHOST)
SUPFLAGS+= -h ${SUPHOST}
.endif
MAKEOBJDIRPREFIX?= /usr/obj
TARGET_ARCH?= ${MACHINE_ARCH}
BUILD_ARCH!= sysctl -n hw.machine_arch
.if ${BUILD_ARCH} == ${MACHINE_ARCH}
OBJTREE= ${MAKEOBJDIRPREFIX}
.else
OBJTREE= ${MAKEOBJDIRPREFIX}/${MACHINE_ARCH}
.endif
WORLDTMP= ${OBJTREE}${.CURDIR}/${BUILD_ARCH}
# /usr/games added for fortune which depend on strfile
STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
TMPPATH= ${STRICTTMPPATH}:${PATH}
TMPDIR?= /tmp
TMPPID!= echo $$$$
INSTALLTMP= ${TMPDIR}/install.${TMPPID}
#
# Building a world goes through the following stages
#
# bootstrap-tool stage [BMAKE]
# This stage is responsible for creating programs that
# are needed for backward compatibility reasons. They
# are not built as cross-tools.
# build-tool stage [TMAKE]
# This stage is responsible for creating the object
# tree and building any tools that are needed during
# the build process.
# cross-tool stage [XMAKE]
# This stage is responsible for creating any tools that
# are needed for cross-builds. A cross-compiler is one
# of them.
# world stage [WMAKE]
# This stage actually builds the world.
# install stage (optional) [IMAKE]
# This stage installs a previously built world.
#
# Common environment for bootstrap related stages
BOOTSTRAPENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
MACHINE_ARCH=${BUILD_ARCH} \
TOOLS_PREFIX=${WORLDTMP} \
PATH=${TMPPATH}
# Common environment for world related stages
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.00503
# bootstrap-tool stage
BMAKEENV= ${BOOTSTRAPENV}
BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DNOMAN -DNOINFO -DNOHTML
# build-tool stage
TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1
# cross-tool stage
XMAKEENV= ${BOOTSTRAPENV} \
TARGET_ARCH=${MACHINE_ARCH}
XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNOMAN -DNOINFO -DNOHTML \
-DNO_FORTRAN -DNO_GDB
# world stage
WMAKEENV= ${CROSSENV} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
# install stage
IMAKEENV= ${CROSSENV} \
PATH=${STRICTTMPPATH}:${INSTALLTMP}
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc
.if ${MACHINE_ARCH} == "i386" && ${MACHINE} == "pc98"
USRDIRS+= usr/libexec/aout
.endif
INCDIRS= arpa g++/std objc protocols readline rpc rpcsvc openssl \
security ss
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
buildworld:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding the temporary build tree"
@echo "--------------------------------------------------------------"
.if !defined(NOCLEAN)
rm -rf ${WORLDTMP}
.else
for dir in bin games include lib sbin; do \
rm -rf ${WORLDTMP}/usr/$$dir; \
done
rm -f ${WORLDTMP}/sys
# XXX - Work-around for broken cc/cc_tools/Makefile.
# This is beyond dirty...
rm -f ${OBJTREE}${.CURDIR}/gnu/usr.bin/cc/cc_tools/.depend
.endif
.for _dir in ${USRDIRS}
mkdir -p ${WORLDTMP}/${_dir}
.endfor
.for _dir in ${INCDIRS}
mkdir -p ${WORLDTMP}/usr/include/${_dir}
.endfor
ln -sf ${.CURDIR}/sys ${WORLDTMP}/sys
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1: bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap-tools
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: cleaning up the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} ${CLEANDIR:S/^/par-/}
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} par-obj
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: build tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} build-tools
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3: cross tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} cross-tools
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} SHARED=symlinks includes
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: make dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-depend
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
everything:
@echo "--------------------------------------------------------------"
@echo ">>> Building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
installworld:
mkdir -p ${INSTALLTMP}
for prog in [ awk cat chflags chown date echo egrep find grep \
install ln make makewhatis miniperl mtree mv perl rm sed sh sysctl \
test true uname wc zic; do \
cp `which $$prog` ${INSTALLTMP}; \
done
cd ${.CURDIR}; ${IMAKE} reinstall
rm -rf ${INSTALLTMP}
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo ">>> Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if !defined(NOMAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding man page indices"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man; ${MAKE} makedb
.endif
#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNEL. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending MACHINE) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use MACHINE instead of MACHINE_ARCH when
# we're in kernel-land. Since only MACHINE_ARCH is (expected) to
# be set to cross-build, we have to make sure MACHINE is set
# properly.
KERNEL?= GENERIC
# The only exotic MACHINE_ARCH/MACHINE combination valid at this
# time is i386/pc98. In all other cases set MACHINE equal to
# MACHINE_ARCH.
.if ${MACHINE_ARCH} != "i386" || ${MACHINE} != "pc98"
MACHINE= ${MACHINE_ARCH}
.endif
KRNLSRCDIR= ${.CURDIR}/sys
KRNLCONFDIR= ${KRNLSRCDIR}/${MACHINE}/conf
KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
.if !defined(NOCLEAN)
CONFIGARGS+= -r
.endif
BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNEL}
.if exists(${KRNLCONFDIR}/${_kernel})
BUILDKERNELS+= ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor
#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding kernel(s)"
@echo "--------------------------------------------------------------"
.for _kernel in ${BUILDKERNELS}
@echo "===> ${_kernel}"
mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
cd ${KRNLCONFDIR}; \
PATH=${TMPPATH} \
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} ${_kernel}
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx \
${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/Makefile
.if !defined(NO_KERNELDEPEND)
cd ${KRNLOBJDIR}/${_kernel}; \
${WMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=kernel depend
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
${WMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=kernel all
.endfor
#
# installkernel
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel:
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} MACHINE=${MACHINE} ${MAKE} KERNEL=kernel install
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Running ${SUP}"
@echo "--------------------------------------------------------------"
.if defined(SUPFILE)
@${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo ">>> Building programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} all
cd ${.CURDIR}/sbin; ${MAKE} all
cd ${.CURDIR}/libexec; ${MAKE} all
cd ${.CURDIR}/usr.bin; ${MAKE} all
cd ${.CURDIR}/usr.sbin; ${MAKE} all
cd ${.CURDIR}/gnu/libexec; ${MAKE} all
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo ">>> Installing programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin; ${MAKE} install
cd ${.CURDIR}/sbin; ${MAKE} install
cd ${.CURDIR}/libexec; ${MAKE} install
cd ${.CURDIR}/usr.bin; ${MAKE} install
cd ${.CURDIR}/usr.sbin; ${MAKE} install
cd ${.CURDIR}/gnu/libexec; ${MAKE} install
cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# bootstrap-tools: Build tools needed for compatibility
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_strfile= games/fortune/strfile
.endif
bootstrap-tools:
.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.sbin/config \
gnu/usr.bin/gperf gnu/usr.bin/texinfo
cd ${.CURDIR}/${_tool}; \
${MAKE} obj; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endfor
#
# build-tools: Build special purpose build tools
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_games= games/adventure games/hack games/phantasia
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
_share= share/syscons/scrnmaps
.endif
.if !defined(NO_FORTRAN)
_fortran= gnu/usr.bin/cc/f771
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_libroken4= kerberosIV/lib/libroken
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_libkrb5= kerberos5/lib/libroken kerberos5/lib/libasn1 kerberos5/lib/libhdb \
kerberos5/lib/libsl
.endif
build-tools:
.for _tool in bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
${_libroken4} ${_libkrb5} lib/libncurses ${_share}
cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
.endfor
#
# cross-tools: Build cross-building tools
#
# WARNING: Because the bootstrap tools are expected to run on the
# build-machine, MACHINE_ARCH is *always* set to BUILD_ARCH when this
# target is being made. TARGET_ARCH is *always* set to reflect the
# target-machine (which you can set by specifying MACHINE_ARCH on
# make's command-line, get it?).
# The reason is simple: we build these tools not to be run on the
# architecture we're cross-building, but on the architecture we're
# currently building on (ie the host-machine) and we expect these
# tools to produce output for the architecture we're trying to
# cross-build.
#
.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
_elf2exe= usr.sbin/elf2exe
.endif
.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
_btxld= usr.sbin/btxld
.endif
# XXX - MACHINE should actually be TARGET. But we don't set that...
.if ${TARGET_ARCH} == "i386" && ${MACHINE} == "pc98"
_aout_tools= usr.bin/size usr.bin/strip gnu/usr.bin/as gnu/usr.bin/ld
.endif
cross-tools:
.for _tool in ${_aout_tools} ${_btxld} ${_elf2exe} usr.bin/genassym \
usr.bin/gensetdefs gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
cd ${.CURDIR}/${_tool}; \
${MAKE} obj; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endfor
#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# includes - possibly generate and install the include files.
#
includes:
cd ${.CURDIR}/include; ${MAKE} -B all install
cd ${.CURDIR}/gnu/include; ${MAKE} install
cd ${.CURDIR}/gnu/lib/libmp; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libgmp; ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
.if exists(${.CURDIR}/secure/lib/libcrypto)
cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/secure/lib/libssl)
cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
.endif
.endif
.if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
.else
cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
defined(MAKE_KERBEROS5)
cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
.endif
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
.if !defined(WANT_CSRG_LIBM)
cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libskey; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libss; ${MAKE} -B hdrs beforeinstall
cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The following dependencies exist between the libraries:
#
# lib*: csu
# libatm: libmd
# libcrypt: libmd
# libdialog: libncurses
# libedit: libncurses
# libg++: libm
# libkrb: libcrypt
# libopie: libmd
# libpam: libcom_err libcrypt libcrypto libgcc_pic libkrb libradius libskey \
# libtacplus libutil libz libssh
# libradius: libmd
# libreadline: libncurses
# libskey: libcrypt libmd
# libss: libcom_err
# libstc++: libm
# libtacplus: libmd
#
# Across directories this comes down to (rougly):
#
# gnu/lib: lib/libm lib/libncurses
# kerberosIV/lib kerberos5/lib: lib/libcrypt
# lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb gnu/lib/libgcc \
# secure/lib/libssh lib/libz
# secure/lib: lib/libmd
#
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
_csu= lib/csu/${MACHINE_ARCH}.pcc
.elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
_csu= lib/csu/i386-elf
.else
_csu= lib/csu/${MACHINE_ARCH}
.endif
.if !defined(NOSECURE) && !defined(NOCRYPT)
_secure_lib= secure/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_kerberosIV_lib= kerberosIV/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_kerberos5_lib= kerberos5/lib
.endif
.if defined(WANT_CSRG_LIBM)
_libm= lib/libm
.else
_libm= lib/msun
.endif
.if !defined(NOPERL)
_libperl= gnu/usr.bin/perl/libperl
.endif
.if ${MACHINE_ARCH} == "i386"
_libkeycap= usr.sbin/pcvt/keycap
.endif
libraries:
.for _lib in ${_csu} lib/libmd lib/libcrypt ${_secure_lib} ${_kerberosIV_lib} \
${_kerberos5_lib} gnu/lib/libgcc lib/libcom_err ${_libm} lib/libncurses \
lib/libradius lib/libskey lib/libtacplus lib/libutil lib/libz lib gnu/lib \
${_libperl} usr.bin/lex/lib ${_libkeycap}
.if exists(${.CURDIR}/${_lib})
cd ${.CURDIR}/${_lib}; \
${MAKE} depend; \
${MAKE} all; \
${MAKE} install
.endif
.endfor
.for __target in clean cleandepend cleandir depend obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
edir=${entry}.${MACHINE_ARCH}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...