dc2535b | Linus Torvalds | 14 March 2019, 15:46:17 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ... | 14 March 2019, 15:46:17 UTC |
0015437 | Sagar Biradar | 08 March 2019, 07:26:41 UTC | scsi: aacraid: Fix performance issue on logical drives Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 14 March 2019, 11:16:36 UTC |
3a487ff | Dan Carpenter | 07 March 2019, 05:33:44 UTC | scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() It used to be that "error" was set to -ENODEV at the start of the function but we shifted some code around an now "error" is set to zero for most error paths. There is a mix of direct returns and "goto out" but I changed everything to direct returns for consistency. Fixes: 56de8357049c ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: James SmartĀ <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 14 March 2019, 11:01:36 UTC |
b6e8811 | Rafael J. Wysocki | 14 March 2019, 09:54:28 UTC | Merge branches 'acpi-tables', 'acpi-debug', 'acpi-doc' and 'acpi-misc' * acpi-tables: ACPI: tables: Simplify PPTT leaf node detection * acpi-debug: ACPI: sysfs: Prevent get_status() from returning acpi_status * acpi-doc: ACPI: Documentation: Fix path for acpidbg tool * acpi-misc: ACPI / configfs: Mark local data structures static ACPI / configfs: Mark local functions static | 14 March 2019, 09:54:28 UTC |
b444e1a | Rafael J. Wysocki | 14 March 2019, 09:53:22 UTC | Merge branches 'pm-opp' and 'pm-tools' * pm-opp: PM / OPP: Update performance state when freq == old_freq OPP: Fix handling of multiple power domains * pm-tools: tools/power/cpupower: Display boost frequency separately | 14 March 2019, 09:53:22 UTC |
75f3e23 | Rafael J. Wysocki | 14 March 2019, 09:53:08 UTC | Merge branch 'pm-domains' * pm-domains: PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor | 14 March 2019, 09:53:08 UTC |
4650b27 | Rafael J. Wysocki | 14 March 2019, 09:51:51 UTC | Merge branches 'pm-cpuidle' and 'pm-cpufreq' * pm-cpuidle: cpuidle: governor: Add new governors to cpuidle_governors again cpuidle: menu: Avoid overflows when computing variance * pm-cpufreq: cpufreq: intel_pstate: Fix up iowait_boost computation cpufreq: pxa2xx: remove incorrect __init annotation cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() | 14 March 2019, 09:51:51 UTC |
e603525 | Rafael J. Wysocki | 14 March 2019, 09:51:38 UTC | Merge branches 'pm-core', 'pm-sleep' and 'pm-qos' * pm-core: PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time * pm-sleep: PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation * pm-qos: PM / QoS: Fix typo in file description | 14 March 2019, 09:51:38 UTC |
da484d0 | Kailang Yang | 14 March 2019, 07:50:59 UTC | ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB Enable headset mode support for new WYSE NB platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 March 2019, 09:31:02 UTC |
136824e | Kailang Yang | 14 March 2019, 08:22:45 UTC | ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO This patch will enable WYSE AIO for Headset mode. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 March 2019, 09:29:22 UTC |
c8a9afa | Jaroslav Kysela | 14 March 2019, 08:21:08 UTC | ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook The ALC225_FIXUP_HEADSET_JACK fixup can be merged to alc295_fixup_chromebook. There are no other users for ALC225_FIXUP_HEADSET_JACK other than the chromebook hardware. Fixes: 10f5b1b85ed1 ("ALSA: hda/realtek - Fixed Headset Mic JD not stable") Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 March 2019, 09:25:53 UTC |
0f1d37e | Dave Airlie | 14 March 2019, 02:14:40 UTC | Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next - Update golden regs for gfx9 - Powerplay fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313194249.3346-1-alexander.deucher@amd.com | 14 March 2019, 02:15:02 UTC |
ad7ad48 | Dave Airlie | 14 March 2019, 01:56:59 UTC | Merge tag 'drm-intel-next-fixes-2019-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - HDCP state handling in ddi_update_pipe - Protect i915_active iterators from the shrinker - Reacquire priolist cache after dropping the engine lock - (Selftest) Always free spinner on __sseu_prepare error - Acquire breadcrumb ref before canceling - Fix atomic state leak on HDMI link reset - Relax mmap VMA check Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312205551.GA7701@intel.com | 14 March 2019, 01:57:11 UTC |
74cd45f | Dave Airlie | 14 March 2019, 01:37:31 UTC | Merge tag 'drm-misc-next-fixes-2019-03-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - qxl: Remove the conflicting framebuffers earlier - Split out some i915 code into the fb_helper to allow the above Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313192158.k3qssf733khsqodn@flea | 14 March 2019, 01:37:46 UTC |
9417d81 | Xin Long | 13 March 2019, 09:00:48 UTC | pptp: dst_release sk_dst_cache in pptp_sock_destruct sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect, so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct, otherwise, the dst refcnt will leak. It can be reproduced by this syz log: r1 = socket$pptp(0x18, 0x1, 0x2) bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e) connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e) Consecutive dmesg warnings will occur: unregister_netdevice: waiting for lo to become free. Usage count = 1 v1->v2: - use rcu_dereference_protected() instead of rcu_dereference_check(), as suggested by Eric. Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 21:22:49 UTC |
63b6c97 | Florian Fainelli | 12 March 2019, 17:50:59 UTC | MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list There is a patchwork instance behind bcm-kernel-feedback-list that is helpful to track submissions, add this list for the Broadcom GENET and SYSTEMPORT drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 21:21:07 UTC |
163d1c3 | Eric Dumazet | 12 March 2019, 13:50:11 UTC | l2tp: fix infoleak in l2tp_ip6_recvmsg() Back in 2013 Hannes took care of most of such leaks in commit bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") But the bug in l2tp_ip6_recvmsg() has not been fixed. syzbot report : BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] move_addr_to_user+0x311/0x570 net/socket.c:227 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 __sys_recvmmsg net/socket.c:2469 [inline] __do_sys_recvmmsg net/socket.c:2492 [inline] __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x445819 Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819 RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 Bytes 0-31 of 32 are uninitialized Memory access of size 32 starts at ffff8880ae62fbb0 Data copied to user address 0000000020000000 Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 21:19:35 UTC |
4504ab0 | Vakul Garg | 12 March 2019, 08:22:57 UTC | net/tls: Inform user space about send buffer availability A previous fix ("tls: Fix write space handling") assumed that user space application gets informed about the socket send buffer availability when tls_push_sg() gets called. Inside tls_push_sg(), in case do_tcp_sendpages() returns 0, the function returns without calling ctx->sk_write_space. Further, the new function tls_sw_write_space() did not invoke ctx->sk_write_space. This leads to situation that user space application encounters a lockup always waiting for socket send buffer to become available. Rather than call ctx->sk_write_space from tls_push_sg(), it should be called from tls_write_space. So whenever tcp stack invokes sk->sk_write_space after freeing socket send buffer, we always declare the same to user space by the way of invoking ctx->sk_write_space. Fixes: 7463d3a2db0ef ("tls: Fix write space handling") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 21:16:44 UTC |
5b5f99b | Zhike Wang | 11 March 2019, 10:15:54 UTC | net_sched: return correct value for *notify* functions It is confusing to directly use return value of netlink_send()/ netlink_unicast() as the return value of *notify*, as it may be not error at all. Example: in tc_del_tfilter(), after calling tfilter_del_notify(), it will goto errout if (err). However, the netlink_send()/netlink_unicast() will return positive value even for successful case. So it may not call tcf_chain_tp_remove() and so on to clean up the resource, as a result, resource is leaked. It may be easier to only check the return value of tfilter_del_nofiy(), but it is more clean to correct all related functions. Co-developed-by: Zengmo Gao <gaozengmo@jd.com> Signed-off-by: Zhike Wang <wangzhike@jd.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 20:48:27 UTC |
deb6bfa | Bryan Whitehead | 13 March 2019, 19:55:48 UTC | lan743x: Fix TX Stall Issue It has been observed that tx queue may stall while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where the tx interrupt vector was disabled automatically, but was not re enabled later. The lan743x has two mechanisms to enable/disable individual interrupts. Interrupts can be enabled/disabled by individual source, and they can also be enabled/disabled by individual vector which has been mapped to the source. Both must be enabled for interrupts to work properly. The TX code path, primarily uses the interrupt enable/disable of the TX source bit, while leaving the vector enabled all the time. However, while investigating this issue it was noticed that the driver requested the use of the vector auto clear feature. The test above revealed a case where the vector enable was cleared unintentionally. This patch fixes the issue by deleting the lines that request the vector auto clear feature to be used. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 20:41:46 UTC |
f6d85f0 | Mathieu Malaterre | 14 January 2019, 20:31:13 UTC | blkcg: annotate implicit fall through There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/trace/blktrace.c:725:9: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 20:31:12 UTC |
c24a126 | Ricardo Biehl Pasquali | 13 March 2019, 19:06:48 UTC | ALSA: pcm: Fix function name in kernel-doc comment Signed-off-by: Ricardo Biehl Pasquali <pasqualirb@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 20:26:32 UTC |
b0d8bc5 | Jaroslav Kysela | 13 March 2019, 16:09:23 UTC | ALSA: hda: hdmi - add Icelake support This is just a port of the ASoC Icelake HDMI codec code to the legacy HDA driver with some cleanups. ASoC commit 019033c854a20e10f691f6cc0e897df8817d9521: "ASoC: Intel: hdac_hdmi: add Icelake support" Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: Bard liao <bard.liao@intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 20:25:44 UTC |
602d674 | Sagi Grimberg | 13 March 2019, 17:55:10 UTC | nvme-tcp: support C2HData with SUCCESS flag A C2HData PDU with the SUCCESS flag set indicates that the I/O was completed by the controller successfully and means that a subsequent completion response capsule PDU will be ommitted. If we see this flag, fisrt we check that LAST_PDU flag is set as well, and then we complete the request when the data transfer (and data digest verification if its on) is done. While we're at it, reuse a bit of code with nvme_fail_request. Reported-by: Steve Blightman <steve.blightman@oracle.com> Suggested-by: Oliver Smith-Denny <osmithde@cisco.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Oliver Smith-Denny <osmithde@cisco.com> Tested-by: Oliver Smith-Denny <osmithde@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
005c674 | Christoph Hellwig | 13 March 2019, 17:55:09 UTC | nvmet: ignore EOPNOTSUPP for discard NVMe DSM is a pure hint, so if the underlying device / file system does not support discard-like operations we should not fail the operation but rather return success. Fixes: 3b031d15995f ("nvmet: add error log support for bdev backend") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
9f0916a | Christoph Hellwig | 13 March 2019, 17:55:08 UTC | nvme: add proper write zeroes setup for the multipath device Add a gendisk argument to nvme_config_write_zeroes so that the call to nvme_update_disk_info for the multipath device node updates the proper request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Tested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
2631857 | Christoph Hellwig | 13 March 2019, 17:55:07 UTC | nvme: add proper discard setup for the multipath device Add a gendisk argument to nvme_config_discard so that the call to nvme_update_disk_info for the multipath device node updates the proper request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Tested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
b1aafb3 | Christoph Hellwig | 13 March 2019, 17:55:06 UTC | nvme: remove nvme_ns_config_oncs Just opencode the two function calls in the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
7b210e4 | Christoph Hellwig | 13 March 2019, 17:55:05 UTC | nvme: disable Write Zeroes for qemu controllers Qemu started out with a broken implementation of Write Zeroes written by yours truly. Disable Write Zeroes on qemu for now, eventually we need to go back and make all the qemu quirks version specific, but that is left for another time. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
404ec31 | James Smart | 13 March 2019, 17:55:04 UTC | nvmet-fc: bring Disconnect into compliance with FC-NVME spec The FC-NVME spec, when finally approved, modified the disconnect LS such that the only scope available is the association. Rework the Disconnect LS processing to be in accordance with the change. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:34 UTC |
0191e74 | James Smart | 13 March 2019, 17:55:03 UTC | nvmet-fc: fix issues with targetport assoc_list list walking There are two changes: 1) The logic in the __nvmet_fc_free_assoc() routine is bad. It uses "safe" routines assuming pointers will come back valid. However, the intervening next structure being linked can be removed from the list and the resulting safe pointers are bad, resulting in NULL ptrs being hit. Correct by scheduling a work element to perform the association delete, which can be done while under lock. 2) Prior patch that added the work element scheduling left a possible reference on the object if the work element couldn't be scheduled. Correct by doing the put on a failing schedule_work() call. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:57:30 UTC |
fa3d493 | Linus Torvalds | 13 March 2019, 18:10:42 UTC | Merge tag 'selinux-pr-20190312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fixes from Paul Moore: "Two small fixes for SELinux in v5.1: one adds a buffer length check to the SELinux SCTP code, the other ensures that the SELinux labeling for a NFS mount is not disabled if the filesystem is mounted twice" * tag 'selinux-pr-20190312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock selinux: add the missing walk_size + len check in selinux_sctp_bind_connect | 13 March 2019, 18:10:42 UTC |
8636b1d | Linus Torvalds | 13 March 2019, 18:07:36 UTC | Merge tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fixes from John Johansen: - fix double when failing to unpack secmark rules in policy - fix leak of dentry when profile is removed * tag 'apparmor-pr-2019-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix double free when unpack of secmark rules fails apparmor: delete the dentry in aafs_remove() to avoid a leak apparmor: Fix warning about unused function apparmor_ipv6_postroute | 13 March 2019, 18:07:36 UTC |
834d371 | James Smart | 13 March 2019, 17:55:02 UTC | nvme-fc: reject reconnect if io queue count is reduced to zero If: - A successful connect has occurred with an io queue count greater than zero and namespaces detected and running. - An error or something occurs which causes a termination of the prior association and then starts a reconnect, - The reconnect then creates a new controller, but for whatever reason, nvme_set_queue_count() results in io queue count set to zero. This will skip io queue and tag set changes. - But... the controller will transition to live, calling nvme_start_ctrl, which calls nvme_start_queues(), which then releases I/Os into the transport which then sends them to the driver. As there are no queues, things eventually hit the driver looking for a handle, which was cleared when the original controller was reset, and it can't proceed. Worst case, things progress, but everything fails. In the failing scenario, the nvme_set_features(NVME_FEAT_NUM_QUEUES) command actually failed with a NVME_SC_INTERNAL error. For some reason, although nvme_set_queue_count() saw the error and set io queue count to zero, it doesn't return a failure status to the transport, which allows the transport to continue using the controller. Fix the problem by simply rejecting the new association if at least 1 I/O queue can't be created. The association reject will fail the reconnect attempt and fall into the reconnect retry policy. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:40 UTC |
06f3d71 | James Smart | 13 March 2019, 17:55:01 UTC | nvme-fc: fix numa_node when dev is null A recent change added a numa_node field to the nvme controller and has the transport assign the node using dev_to_node(). However, fcloop registers with a NULL device struct, so the dev_to_node() call oops. Revise the assignment to assign no node when device struct is null. Fixes: 103e515efa89b ("nvme: add a numa_node field to struct nvme_ctrl") Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> [hch: small coding style fixup] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:40 UTC |
9f7d8ae | James Smart | 13 March 2019, 17:55:00 UTC | nvme-fc: use nr_phys_segments to determine existence of sgl For some nvme command, when issued by the nvme core layer, there is an internal buffer which can cause blk_rq_payload_bytes() to return a non-zero value yet there is no actual/real command payload and sg list. An example is the WRITE ZEROES command. To address this, when making choices on whether to dma map an sgl, use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes(). When there is a sgl, blk_rq_payload_bytes() will return the amount of data to be transferred by the sgl. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
d11de63 | Yufen Yu | 13 March 2019, 17:54:59 UTC | nvme-loop: init nvmet_ctrl fatal_err_work when allocate After commit 4d43d395fe (workqueue: Try to catch flush_work() without INIT_WORK()), it can cause warning when delete nvme-loop device, trace like: [ 76.601272] Call Trace: [ 76.601646] ? del_timer+0x72/0xa0 [ 76.602156] __cancel_work_timer+0x1ae/0x270 [ 76.602791] cancel_work_sync+0x14/0x20 [ 76.603407] nvmet_ctrl_free+0x1b7/0x2f0 [nvmet] [ 76.604091] ? free_percpu+0x168/0x300 [ 76.604652] nvmet_sq_destroy+0x106/0x240 [nvmet] [ 76.605346] nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop] [ 76.606220] nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop] [ 76.607026] nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop] [ 76.607871] nvme_do_delete_ctrl+0x75/0xb0 [ 76.608477] nvme_sysfs_delete+0x7d/0xc0 [ 76.609057] dev_attr_store+0x24/0x40 [ 76.609603] sysfs_kf_write+0x4c/0x60 [ 76.610144] kernfs_fop_write+0x19a/0x260 [ 76.610742] __vfs_write+0x1c/0x60 [ 76.611246] vfs_write+0xfa/0x280 [ 76.611739] ksys_write+0x6e/0x120 [ 76.612238] __x64_sys_write+0x1e/0x30 [ 76.612787] do_syscall_64+0xbf/0x3a0 [ 76.613329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may more reasonable. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
01fc08f | Yufen Yu | 13 March 2019, 17:54:58 UTC | nvme: update comment to make the code easier to read After commit a686ed75c0fb ("nvme: introduce a helper function for controller deletion), nvme_delete_ctrl_sync no longer use flush_work. Update comment, accordingly. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
a63b837 | Sagi Grimberg | 13 March 2019, 17:54:57 UTC | nvme: put ns_head ref if namespace fails allocation In case nvme_alloc_ns fails after we initialize ns_head but before we add the ns to the controller namespaces list we need to explicitly put the ns_head reference because when we teardown the controller we won't find it, causing us to leak a dangling subsystem eventually. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
81fe928 | Keith Busch | 13 March 2019, 17:54:56 UTC | nvme-trace: fix cdw10 buffer overrun The field is defined to be a 24 byte array, we don't need to multiply the sizeof() that field by the number of dwords it covers. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
415df90 | Keith Busch | 13 March 2019, 17:54:55 UTC | nvme: don't warn on block content change effects A write or flush IO passthrough command is expected to change the logical block content, so don't warn on these as no additional handling is necessary. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
d9d53ed | Max Gurtovoy | 13 March 2019, 17:54:54 UTC | nvme: add get-feature to admin cmds tracer This will print get-feature cmd in more informative way. For example, run "nvme get-feature /dev/nvme0 -n 1 -f 0x9 -c 10" will trace: nvme-3907 [008] .... 1763.635054: nvme_setup_cmd: nvme0: qid=0, cmdid=6, nsid=1, flags=0x0, meta=0x0, cmd=(nvme_admin_get_features fid=0x9 sel=0x0 cdw11=0xa) <idle>-0 [001] d.h. 1763.635112: nvme_sq: nvme0: qid=0, head=27, tail=27 <idle>-0 [008] ..s. 1763.635121: nvme_complete_rq: nvme0: qid=0, cmdid=6, res=10, retries=0, flags=0x2, status=0 Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 March 2019, 18:05:39 UTC |
6fb7ef5 | Masahiro Yamada | 08 March 2019, 09:56:25 UTC | kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG This will be a little more efficient since unset CONFIG options are stripped away from auto.conf, and we can hard-code the path to auto.conf since it is never overridden. include/config/kernel.release is generated before %pkg is run. So, it is guaranteed auto.conf is up-to-date. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:13 UTC |
515f4c6 | Masahiro Yamada | 08 March 2019, 09:56:24 UTC | kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb I think is_enabled() and if_enable_echo() in scripts/package/mkdebian are useful. builddeb also has many repetitive greps over the kernel config, so I borrowed the idea to clean it up. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:12 UTC |
7e548e9 | Masahiro Yamada | 08 March 2019, 09:56:23 UTC | kbuild: deb-pkg: add CONFIG_ prefix to kernel config options This might be a kind of bike-shed, but I personally prefer grep'able code. I often do 'git grep CONFIG_FOO' instead of 'git grep FOO' when I want to know where that CONFIG option is used. This makes code longer, but I hope this is acceptable level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:12 UTC |
2b50f7a | Masahiro Yamada | 08 March 2019, 09:13:39 UTC | kbuild: add workaround for Debian make-kpkg Since commit 3812b8c5c5d5 ("kbuild: make -r/-R effective in top Makefile for old Make versions"), make-kpkg is not working. make-kpkg directly includes the top Makefile of Linux kernel, and appends some debian_* targets. /usr/share/kernel-package/ruleset/kernel_version.mk: # Include the kernel makefile override dot-config := 1 include Makefile dot-config := 1 I did not know the kernel Makefile was used in that way, and it is hard to guarantee the behavior when the kernel Makefile is included by another Makefile from a different project. It looks like Debian Stretch stopped providing make-kpkg. Maybe it is obsolete and being replaced with 'make deb-pkg' etc. but still widely used. This commit adds a workaround; if the top Makefile is included by another Makefile, skip sub-make in order to make the main part visible. 'MAKEFLAGS += -rR' does not become effective for GNU Make < 4.0, but Debian/Ubuntu is already using newer versions. The effect of this commit: Debian 8 (Jessie) : Fixed Debian 9 (Stretch) : make-kpkg (kernel-package) is not provided Ubuntu 14.04 LTS : NOT Fixed Ubuntu 16.04 LTS : Fixed Ubuntu 18.04 LTS : Fixed This commit cannot fix Ubuntu 14.04 because it installs GNU Make 3.81, but its support will end in Apr 2019, which is before the Linux v5.1 release. I added warning so that nobody would try to include the top Makefile. Fixes: 3812b8c5c5d5 ("kbuild: make -r/-R effective in top Makefile for old Make versions") Reported-by: Liz Zhang <lizzha@microsoft.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Lili Deng <v-lide@microsoft.com> Cc: Manoj Srivastava <srivasta@debian.org> | 13 March 2019, 17:39:12 UTC |
94cf8ac | Masahiro Yamada | 08 March 2019, 05:49:10 UTC | kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} As commit 423a8155facf ("kbuild: Fix reading of .config in link-vmlinux.sh") addressed, some shells fail to perform '.' if ${KCONFIG_CONFIG} does not contain a slash at all. Instead, we can source include/config/auto.conf, which obviously contain slashes, and we do not expect its file path overridden by a user. Perhaps, the performance might be slightly better since unset CONFIG options are stripped from include/config/auto.conf. scripts/setlocalversion already works this way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:11 UTC |
c649bd5 | Masahiro Yamada | 08 March 2019, 05:30:35 UTC | unicore32: simplify linker script generation for decompressor When I was searching for unneeded $(KCONFIG_CONFIG) usages, I noticed this strange build dependency. It can use $(call if_changed,...) in case ZTEXTADDR and ZBSSADDR are changed, but even a simpler way is to use the pattern rule in scripts/Makefile.build. This is what arch/arm/boot/compressed/Makefile does. I did only build test. I confirmed equivalent vmlinux.lds was generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:11 UTC |
fc2b47b | Masahiro Yamada | 15 February 2019, 04:04:26 UTC | h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- It believe it is a bad idea to hardcode a specific compiler prefix that may or may not be installed on a user's system. It is annoying when testing features that should not require compilers at all. For example, mrproper, headers_install, etc. should work without any compiler. They look like follows on my machine. $ make ARCH=h8300 mrproper ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found make: h8300-unknown-linux-gcc: Command not found [ a bunch of the same error messages continue ] $ make ARCH=h8300 headers_install ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found HOSTCC scripts/basic/fixdep make: h8300-unknown-linux-gcc: Command not found WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h [ snip ] The solution is to delete this line, or to use cc-cross-prefix like some architectures do. I chose the latter as a moderate fixup. I added an alternative 'h8300-linux-' because it is available at: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:10 UTC |
898f5a0 | Masahiro Yamada | 05 February 2019, 07:33:37 UTC | kbuild: move archive command to scripts/Makefile.lib scripts/Makefile.build and arch/s390/boot/Makefile use the same command (thin archiving with symbol table creation). Avoid the code duplication, and move it to scripts/Makefile.lib. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:10 UTC |
46c7dd5 | Masahiro Yamada | 01 February 2019, 04:50:45 UTC | modpost: always show verbose warning for section mismatch Unless CONFIG_DEBUG_SECTION_MISMATCH is enabled, modpost only shows the number of section mismatches. If you want to know the symbols causing the issue, you need to rebuild with CONFIG_DEBUG_SECTION_MISMATCH. It is tedious. I think it is fine to show annoying warning when a new section mismatch comes in. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:09 UTC |
393492b | Masahiro Yamada | 25 January 2019, 07:18:23 UTC | ia64: prefix header search path with $(srctree)/ Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). I removed some header search paths because I was able to build ia64 without them. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:39:09 UTC |
13d3bc7 | Masahiro Yamada | 25 January 2019, 03:41:38 UTC | libfdt: prefix header search paths with $(srctree)/ Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:36:04 UTC |
e3a2285 | Riku Voipio | 02 January 2019, 09:23:04 UTC | deb-pkg: generate correct build dependencies bison/flex is now needed always for building for kconfig. Some build dependencies depend on kernel configuration, enable them as needed: - libelf-dev when UNWINDER_ORC is set - libssl-dev for SYSTEM_TRUSTED_KEYRING Since the libssl-dev is needed for extract_cert binary, denote with :native to install the libssl-dev for the build machines architecture, rather than for the architecture of the kernel being built. Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: maximilian attems <maks@stro.at> [masahiro.yamada: change 'flex' to 'flex | flex:native' ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 13 March 2019, 17:30:26 UTC |
cd86d14 | Hans de Goede | 12 March 2019, 14:55:54 UTC | i2c: i2c-designware-platdrv: Always use a dynamic adapter number Before this commit the i2c-designware-platdrv assumes that if the pdev has an apci-companion it should use a dynamic adapter-nr and it sets adapter->nr to -1, otherwise it will use pdev->id as adapter->nr. There are 3 ways how platform_device-s to which i2c-designware-platdrv will bind can be instantiated: 1) Through of / devicetree 2) Through ACPI enumeration 3) Explicitly instantiated through platform_device_create + add 1) In case of devicetree-instantiation the drivers/of code always sets pdev->id to PLATFORM_DEVID_NONE, which is -1 so in this case both paths to set adapter->nr end up doing the same thing. 2) In case of ACPI instantiation the device will always have an ACPI-companion, so we are already using dynamic adapter-nrs. 3) There are 2 places manually instantiating a designware_i2c platform_dev: drivers/mfd/intel_quark_i2c_gpio.c drivers/mfd/intel-lpss.c In the intel_quark_i2c_gpio.c case pdev->id is always 0, so switching to dynamic adapter-nrs here could lead to the bus-number no longer being stable, but the quark X1000 only has 1 i2c-controller, which will also be assigned bus-number 0 when using dynamic adapter-nrs. In the intel-lpss.c case intel_lpss_probe() is called from either intel-lpss-acpi.c in which case there always is an ACPI-companion, or from intel-lpss-pci.c. In most cases devices handled by intel-lpss-pci.c also have an ACPI-companion, so we use a dynamic adapter-nr. But in some cases the ACPI-companion is missing and we would use pdev->id (allocated from intel_lpss_devid_ida). Devices which use the intel-lpss-pci.c code typically have many i2c busses, so using pdev->id in this case may lead to a bus-number conflict, triggering a WARN(id < 0, "couldn't get idr") in i2c-core-base.c causing an oops an the adapter registration to fail. So in this case using non dynamic adapter-nrs is actually undesirable. One machine on which this oops was triggering is the Apollo Lake based Acer TravelMate Spin B118. TL;DR: Switching to always using dynamic adapter-numbers does not make any difference in most cases and in the one case where it does make a difference the behavior change is desirable because the old behavior caused an oops. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1687065 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 13 March 2019, 17:07:10 UTC |
77f3381 | Hans de Goede | 12 March 2019, 14:55:53 UTC | i2c: i2c-designware-platdrv: Cleanup setting of the adapter number i2c-designware-platdrv assumes that if the pdev has an apci-companion it should use a dynamic adapter-nr and otherwise it will use pdev->id as adapter-nr. Before this commit the setting of the adapter.nr was somewhat convoluted, in the acpi_companion case it was set from dw_i2c_acpi_configure, in the non acpi_companion case it was set from dw_i2c_set_fifo_size based on tx_fifo_depth not being set yet indicating that dw_i2c_acpi_configure was not executed. This cleans this up, directly setting the adapter-nr from dw_i2c_plat_probe for both cases. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 13 March 2019, 17:06:56 UTC |
5453a3d | Linus Torvalds | 13 March 2019, 17:06:28 UTC | Merge tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - rename lexer and parse files - fix 'Save as' menu of xconfig * tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix 'Save As' menu of xconfig kconfig: rename zconf.y to parser.y kconfig: rename zconf.l to lexer.l | 13 March 2019, 17:06:28 UTC |
bf263c3 | Wolfram Sang | 12 March 2019, 12:44:42 UTC | i2c: add extra check to safe DMA buffer helper Make sure we report 'no buffer' for 0-length messages. This can only happen if threshold is set to 0 which is kind of bogus but we should still handle this situation. Update the docs and add a debug message to educate callers of this function. Reported-by: Hsin-Yi Wang <hsinyi@chromium.org> Fixes: e94bc5d18be0 ("i2c: add helpers to ease DMA handling") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 13 March 2019, 17:03:26 UTC |
add8462 | Linus Torvalds | 13 March 2019, 17:01:10 UTC | Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this cycle are across the board. The bulk of it is cleanups, but there's also new device support in some drivers as well as more conversions to the atomic API" * tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: atmel: Remove useless symbolic definitions pwm: bcm-kona: Update macros to remove braces around numbers pwm: imx27: Only enable the clocks once in .get_state() pwm: rcar: Improve calculation of divider pwm: rcar: Remove legacy APIs pwm: rcar: Use "atomic" API on rcar_pwm_resume() pwm: rcar: Add support "atomic" API pwm: atmel: Add support for SAM9X60's PWM controller pwm: atmel: Add PWM binding for SAM9X60 pwm: atmel: Rename objects of type atmel_pwm_data pwm: atmel: Add support for controllers with 32 bit counters pwm: atmel: Add struct atmel_pwm_data pwm: Add MediaTek MT8183 display PWM driver support pwm: hibvt: Add hi3559v100 support dt-bindings: pwm: hibvt: Add hi3559v100 support pwm: hibvt: Use individual struct per of-data pwm: imx: Signedness bug in imx_pwm_get_state() pwm: imx: Split into two drivers pwm: imx: Don't print an error on -EPROBE_DEFER pwm: imx: Set driver data earlier simplifying the end of ->probe() ... | 13 March 2019, 17:01:10 UTC |
3a186d3 | Linus Torvalds | 13 March 2019, 16:59:08 UTC | Merge tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox-test: support multiple controller instances - misc cleanup: IMX, STM32 and Tegra - new driver: ZynqMP IPI * tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: keep MU irq working during suspend/resume dt-bindings: mailbox: Add Xilinx IPI Mailbox mailbox: ZynqMP IPI mailbox controller mailbox: stm32-ipcc: remove useless device_init_wakeup call mailbox: stm32-ipcc: do not enable wakeup source by default mailbox: mailbox-test: fix null pointer if no mmio mailbox: mailbox-test: fix debugfs in multi-instances mailbox: tegra-hsp: mark suspend function as __maybe_unused | 13 March 2019, 16:59:08 UTC |
dac0bde | Linus Torvalds | 13 March 2019, 16:51:17 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bug in the newly added Exynos5433 AES code as well as an old one in the caam driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - add missing put_device() call crypto: s5p-sss - fix AES support for Exynos5433 | 13 March 2019, 16:51:17 UTC |
7b7395a | Jens Axboe | 13 March 2019, 16:47:25 UTC | Merge branch 'for-5.1/md-post' of https://github.com/liu-song-6/linux into for-5.1/block-post Pull MD fixes from Song. * 'for-5.1/md-post' of https://github.com/liu-song-6/linux: md: Fix failed allocation of md_register_thread It's wrong to add len to sector_nr in raid10 reshape twice raid5: set write hint for PPL | 13 March 2019, 16:47:25 UTC |
5ea6718 | Linus Torvalds | 13 March 2019, 16:41:18 UTC | Merge tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has been in -next since before the merge window opened, with no known collisions / issues reported. The only detail worth noting, outside the summary below, is that the "libnvdimm-start-pad" topic has been truncated to just cleanups and small fixes. The full topic branch would have doubled down on hacks around the "section alignment" limitation of the core-mm, instead effort is now being spent to address that root issue in the memory hotplug implementation for v5.2. - Fix nfit-bus command submission regression - Support retrieval of short-ARS results if the ARS state is "requires continuation", and even if the "no_init_ars" module parameter is specified - Allow busy-polling of the kernel ARS state by allowing root to reset the exponential back-off timer - Filter potentially stale ARS results by tracking query-ARS relative to the previous start-ARS - Enhance dax_device alignment checks - Add support for the Hyper-V family of device-specific-methods (DSMs) - Add several fixes and workarounds for Hyper-V compatibility - Fix support to cache the dirty-shutdown-count at init" * tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits) libnvdimm/namespace: Clean up holder_class_store() libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings acpi/nfit: Update NFIT flags error message libnvdimm/btt: Fix LBA masking during 'free list' population libnvdimm/btt: Remove unnecessary code in btt_freelist_init libnvdimm/pfn: Remove dax_label_reserve dax: Check the end of the block-device capacity with dax_direct_access() nfit/ars: Avoid stale ARS results nfit/ars: Allow root to busy-poll the ARS state machine nfit/ars: Introduce scrub_flags nfit/ars: Remove ars_start_flags nfit/ars: Attempt short-ARS even in the no_init_ars case nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot acpi/nfit: Require opt-in for read-only label configurations libnvdimm/pmem: Honor force_raw for legacy pmem regions libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init() libnvdimm: Fix altmap reservation size calculation libnvdimm, pfn: Fix over-trim in trim_pfn_device() acpi/nfit: Fix bus command validation libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family ... | 13 March 2019, 16:41:18 UTC |
3bb0f28 | Linus Torvalds | 13 March 2019, 16:37:09 UTC | Merge tag 'fsdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull filesystem-dax updates from Dan Williams: - Fix handling of PMD-sized entries in the Xarray that lead to a crash scenario - Miscellaneous cleanups and small fixes * tag 'fsdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Flush partial PMDs correctly fs/dax: NIT fix comment regarding start/end vs range fs/dax: Convert to use vmf_error() | 13 March 2019, 16:37:09 UTC |
a840b56 | Linus Torvalds | 13 March 2019, 16:34:35 UTC | Merge tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - A new interface for UBI to deal better with read disturb - Reject unsupported ioctl flags in UBIFS (xfstests found it) * tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: wl: Silence uninitialized variable warning ubifs: Reject unsupported ioctl flags explicitly ubi: Expose the bitrot interface ubi: Introduce in_pq() | 13 March 2019, 16:34:35 UTC |
31b265b | Douglas Anderson | 08 March 2019, 19:32:04 UTC | tracing: kdb: Fix ftdump to not sleep As reported back in 2016-11 [1], the "ftdump" kdb command triggers a BUG for "sleeping function called from invalid context". kdb's "ftdump" command wants to call ring_buffer_read_prepare() in atomic context. A very simple solution for this is to add allocation flags to ring_buffer_read_prepare() so kdb can call it without triggering the allocation error. This patch does that. Note that in the original email thread about this, it was suggested that perhaps the solution for kdb was to either preallocate the buffer ahead of time or create our own iterator. I'm hoping that this alternative of adding allocation flags to ring_buffer_read_prepare() can be considered since it means I don't need to duplicate more of the core trace code into "trace_kdb.c" (for either creating my own iterator or re-preparing a ring allocator whose memory was already allocated). NOTE: another option for kdb is to actually figure out how to make it reuse the existing ftrace_dump() function and totally eliminate the duplication. This sounds very appealing and actually works (the "sr z" command can be seen to properly dump the ftrace buffer). The downside here is that ftrace_dump() fully consumes the trace buffer. Unless that is changed I'd rather not use it because it means "ftdump | grep xyz" won't be very useful to search the ftrace buffer since it will throw away the whole trace on the first grep. A future patch to dump only the last few lines of the buffer will also be hard to implement. [1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 13 March 2019, 13:46:10 UTC |
167897f | Jaroslav Kysela | 13 March 2019, 12:40:15 UTC | ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by: Jeff Burrell <jeff.burrell@hp.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 13:41:55 UTC |
10f5b1b | Kailang Yang | 21 February 2019, 08:10:22 UTC | ALSA: hda/realtek - Fixed Headset Mic JD not stable It will be lose Mic JD state when Chrome OS boot and headset was plugged. Implement of reset combo jack JD. It will show normally. Fixes: e854747d7593 ("ALSA: hda/realtek - Enable headset button support for new codec") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 11:00:41 UTC |
cbc05fd | Jian-Hong Pan | 13 March 2019, 09:33:24 UTC | ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 10:59:24 UTC |
bb06c38 | zhengbin | 13 March 2019, 08:01:37 UTC | 9p/net: fix memory leak in p9_client_create If msize is less than 4096, we should close and put trans, destroy tagpool, not just free client. This patch fixes that. Link: http://lkml.kernel.org/m/1552464097-142659-1-git-send-email-zhengbin13@huawei.com Cc: stable@vger.kernel.org Fixes: 574d356b7a02 ("9p/net: put a lower bound on msize") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> | 13 March 2019, 10:50:04 UTC |
7472946 | Arnd Bergmann | 04 March 2019, 20:33:25 UTC | ALSA: hda/tegra: avoid build error without CONFIG_PM The #ifdef protection around the PM functions is wrong, leading to a failed reference in some configurations: sound/pci/hda/hda_tegra.c: In function 'hda_tegra_runtime_suspend': sound/pci/hda/hda_tegra.c:273:2: error: implicit declaration of function 'hda_tegra_disable_clocks'; did you mean 'hda_tegra_enable_clocks'? [-Werror=implicit-function-declaration] Better remove the #ifdefs entirely and rely on the compiler silently dropping unused functions marked __maybe_unused. Fixes: 707e0759f2f4 ("ALSA: hda/tegra: implement runtime suspend/resume") Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 10:27:54 UTC |
a2c6433 | Aditya Pakki | 04 March 2019, 23:00:02 UTC | ALSA: usx2y: Fix potential NULL pointer dereference usb_alloc_urb() can fail due to kmalloc failure and push the error upstream. Further this can cause a NULL pointer dereference in init_pipe_urbs(). This patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 10:27:06 UTC |
d344e07 | Mariusz Ceier | 11 March 2019, 20:53:57 UTC | ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start() For ca0132 codec, azx_dev->stream is NULL during firmware loading. Calling snd_hdac_get_stream_stripe_ctl unconditionally causes NULL pointer dereference in that function. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2019, 10:23:59 UTC |
de3c83c | Mathieu Malaterre | 12 March 2019, 20:18:23 UTC | powerpc/64s: Include <asm/nmi.h> header file to fix a warning Make sure to include <asm/nmi.h> to provide the following prototype: hv_nmi_check_nonrecoverable. Remove the following warning treated as error (W=1): arch/powerpc/kernel/traps.c:393:6: error: no previous prototype for 'hv_nmi_check_nonrecoverable' Fixes: ccd477028a20 ("powerpc/64s: Fix HV NMI vs HV interrupt recoverability test") Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 13 March 2019, 04:03:13 UTC |
1702877 | Alexey Kardashevskiy | 12 March 2019, 05:07:12 UTC | powerpc/powernv: Fix compile without CONFIG_TRACEPOINTS The functions returns s64 but the return statement is missing. This adds the missing return statement. Fixes: 75d9fc7fd94e ("powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 13 March 2019, 03:59:39 UTC |
aadcef6 | Chao Yu | 12 March 2019, 07:44:27 UTC | f2fs: fix to avoid deadlock in f2fs_read_inline_dir() As Jiqun Li reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202883 sometimes, dead lock when make system call SYS_getdents64 with fsync() is called by another process. monkey running on android9.0 1. task 9785 held sbi->cp_rwsem and waiting lock_page() 2. task 10349 held mm_sem and waiting sbi->cp_rwsem 3. task 9709 held lock_page() and waiting mm_sem so this is a dead lock scenario. task stack is show by crash tools as following crash_arm64> bt ffffffc03c354080 PID: 9785 TASK: ffffffc03c354080 CPU: 1 COMMAND: "RxIoScheduler-3" >> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8 crash-arm64> bt 10349 PID: 10349 TASK: ffffffc018b83080 CPU: 1 COMMAND: "BUGLY_ASYNC_UPL" >> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc PC: 00000033 LR: 00000000 SP: 00000000 PSTATE: ffffffffffffffff crash-arm64> bt 9709 PID: 9709 TASK: ffffffc03e7f3080 CPU: 1 COMMAND: "IntentService[A" >> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc >> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4 PC: ffffff8008274114 [compat_filldir64+120] LR: ffffff80083584d4 [f2fs_fill_dentries+448] SP: ffffffc001e67b80 PSTATE: 80400145 X29: ffffffc001e67b80 X28: 0000000000000000 X27: 000000000000001a X26: 00000000000093d7 X25: ffffffc070d52480 X24: 0000000000000008 X23: 0000000000000028 X22: 00000000d43dfd60 X21: ffffffc001e67e90 X20: 0000000000000011 X19: ffffff80093a4000 X18: 0000000000000000 X17: 0000000000000000 X16: 0000000000000000 X15: 0000000000000000 X14: ffffffffffffffff X13: 0000000000000008 X12: 0101010101010101 X11: 7f7f7f7f7f7f7f7f X10: 6a6a6a6a6a6a6a6a X9: 7f7f7f7f7f7f7f7f X8: 0000000080808000 X7: ffffff800827409c X6: 0000000080808000 X5: 0000000000000008 X4: 00000000000093d7 X3: 000000000000001a X2: 0000000000000011 X1: ffffffc070d52480 X0: 0000000000800238 >> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0 PC: 0000003c LR: 00000000 SP: 00000000 PSTATE: 000000d9 X12: f48a02ff X11: d4678960 X10: d43dfc00 X9: d4678ae4 X8: 00000058 X7: d4678994 X6: d43de800 X5: 000000d9 X4: d43dfc0c X3: d43dfc10 X2: d46799c8 X1: 00000000 X0: 00001068 Below potential deadlock will happen between three threads: Thread A Thread B Thread C - f2fs_do_sync_file - f2fs_write_checkpoint - down_write(&sbi->node_change) -- 1) - do_page_fault - down_write(&mm->mmap_sem) -- 2) - do_wp_page - f2fs_vm_page_mkwrite - getdents64 - f2fs_read_inline_dir - lock_page -- 3) - f2fs_sync_node_pages - lock_page -- 3) - __do_map_lock - down_read(&sbi->node_change) -- 1) - f2fs_fill_dentries - dir_emit - compat_filldir64 - do_page_fault - down_read(&mm->mmap_sem) -- 2) Since f2fs_readdir is protected by inode.i_rwsem, there should not be any updates in inode page, we're safe to lookup dents in inode page without its lock held, so taking off the lock to improve concurrency of readdir and avoid potential deadlock. Reported-by: Jiqun Li <jiqun.li@unisoc.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 02:07:09 UTC |
2c28aba | Chao Yu | 05 March 2019, 11:32:26 UTC | f2fs: fix to adapt small inline xattr space in __find_inline_xattr() With below testcase, we will fail to find existed xattr entry: 1. mkfs.f2fs -O extra_attr -O flexible_inline_xattr /dev/zram0 2. mount -t f2fs -o inline_xattr_size=1 /dev/zram0 /mnt/f2fs/ 3. touch /mnt/f2fs/file 4. setfattr -n "user.name" -v 0 /mnt/f2fs/file 5. getfattr -n "user.name" /mnt/f2fs/file /mnt/f2fs/file: user.name: No such attribute The reason is for inode which has very small inline xattr size, __find_inline_xattr() will fail to traverse any entry due to first entry may not be loaded from xattr node yet, later, we may skip to check entire xattr datas in __find_xattr(), result in such wrong condition. This patch adds condition to check such case to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 02:02:26 UTC |
dd6c89b | Chao Yu | 04 March 2019, 09:19:04 UTC | f2fs: fix to do sanity check with inode.i_inline_xattr_size As Paul Bandha reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202709 When I run the poc on the mounted f2fs img I get a buffer overflow in read_inline_xattr due to there being no sanity check on the value of i_inline_xattr_size. I created the img by just modifying the value of i_inline_xattr_size in the inode: i_name [test1.txt] i_ext: fofs:0 blkaddr:0 len:0 i_extra_isize [0x 18 : 24] i_inline_xattr_size [0x ffff : 65535] i_addr[ofs] [0x 0 : 0] mkdir /mnt/f2fs mount ./f2fs1.img /mnt/f2fs gcc poc.c -o poc ./poc int main() { int y = syscall(SYS_listxattr, "/mnt/f2fs/test1.txt", NULL, 0); printf("ret %d", y); printf("errno: %d\n", errno); } BUG: KASAN: slab-out-of-bounds in read_inline_xattr+0x18f/0x260 Read of size 262140 at addr ffff88011035efd8 by task f2fs1poc/3263 CPU: 0 PID: 3263 Comm: f2fs1poc Not tainted 4.18.0-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x83/0x250 kasan_report+0x213/0x350 memcpy+0x1f/0x50 read_inline_xattr+0x18f/0x260 read_all_xattrs+0xba/0x190 f2fs_listxattr+0x9d/0x3f0 listxattr+0xb2/0xd0 path_listxattr+0x93/0xe0 do_syscall_64+0x9d/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Let's add sanity check for inode.i_inline_xattr_size during f2fs_iget() to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 02:02:26 UTC |
70db5b0 | Jaegeuk Kim | 12 March 2019, 18:49:53 UTC | f2fs: give some messages for inline_xattr_size This patch adds some kernel messages when user sets wrong inline_xattr_size. Fixes: 500e0b28ecd3 ("f2fs: fix to check inline_xattr_size boundary correctly") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 02:02:21 UTC |
86109c9 | Chao Yu | 07 March 2019, 09:31:30 UTC | f2fs: don't trigger read IO for beyond EOF page In f2fs_mpage_readpages(), if page is beyond EOF, we should just zero out it, but previously, before checking previous mapping info, we missed to check filesize boundary, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
240a591 | Chao Yu | 06 March 2019, 09:30:59 UTC | f2fs: fix to add refcount once page is tagged PG_private As Gao Xiang reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202749 f2fs may skip pageout() due to incorrect page reference count. The problem here is that MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true. But currently, f2fs won't add/del refcount when changing PG_private flag. Anyway, f2fs should follow MM's rule to make MM's related flows running as expected. [1] https://lore.kernel.org/lkml/2b19b3c4-2bc4-15fa-15cc-27a13e5c7af1@aol.com/ Reported-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
25720cc | Chao Yu | 06 March 2019, 08:18:33 UTC | f2fs: remove wrong comment in f2fs_invalidate_page() Since 8c242db9b8c0 ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer"), we've started to not skip clear private flag for atomic_write page truncation, so removing old wrong comment in f2fs_invalidate_page(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
2a6a7e7 | Chao Yu | 05 March 2019, 09:52:33 UTC | f2fs: fix to use kvfree instead of kzfree As Jiqun Li reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202747 System can panic due to using wrong allocate/free function pair in xattr interface: - use kvmalloc to allocate memory - use kzfree to free memory Let's fix to use kvfree instead of kzfree, BTW, we are safe to get rid of kzfree, since there is no such confidential data stored as xattr, we don't need to zero it before free memory. Fixes: 5222595d093e ("f2fs: use kvmalloc, if kmalloc is failed") Reported-by: Jiqun Li <jiqun.li@unisoc.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
76630f2 | Chao Yu | 26 February 2019, 11:01:16 UTC | f2fs: print more parameters in trace_f2fs_map_blocks for better map_blocks trace. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
559e87c | Chao Yu | 26 February 2019, 11:01:15 UTC | f2fs: trace f2fs_ioc_shutdown This patch supports to trace f2fs_ioc_shutdown. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
4843298 | Chao Yu | 25 February 2019, 09:11:03 UTC | f2fs: fix to avoid deadlock of atomic file operations Thread A Thread B - __fput - f2fs_release_file - drop_inmem_pages - mutex_lock(&fi->inmem_lock) - __revoke_inmem_pages - lock_page(page) - open - f2fs_setattr - truncate_setsize - truncate_inode_pages_range - lock_page(page) - truncate_cleanup_page - f2fs_invalidate_page - drop_inmem_page - mutex_lock(&fi->inmem_lock); We may encounter above ABBA deadlock as reported by Kyungtae Kim: I'm reporting a bug in linux-4.17.19: "INFO: task hung in drop_inmem_page" (no reproducer) I think this might be somehow related to the following: https://groups.google.com/forum/#!searchin/syzkaller-bugs/INFO$3A$20task$20hung$20in$20%7Csort:date/syzkaller-bugs/c6soBTrdaIo/AjAzPeIzCgAJ ========================================= INFO: task syz-executor7:10822 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D27024 10822 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 schedule_preempt_disabled+0x18/0x30 kernel/sched/core.c:3617 __mutex_lock_common kernel/locking/mutex.c:833 [inline] __mutex_lock+0x5bd/0x1410 kernel/locking/mutex.c:893 mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:908 drop_inmem_page+0xcb/0x810 fs/f2fs/segment.c:327 f2fs_invalidate_page+0x337/0x5e0 fs/f2fs/data.c:2401 do_invalidatepage mm/truncate.c:165 [inline] truncate_cleanup_page+0x261/0x330 mm/truncate.c:187 truncate_inode_pages_range+0x552/0x1610 mm/truncate.c:367 truncate_inode_pages mm/truncate.c:478 [inline] truncate_pagecache+0x6d/0x90 mm/truncate.c:801 truncate_setsize+0x81/0xa0 mm/truncate.c:826 f2fs_setattr+0x44f/0x1270 fs/f2fs/file.c:781 notify_change+0xa62/0xe80 fs/attr.c:313 do_truncate+0x12e/0x1e0 fs/open.c:63 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e459c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e45a6cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e45a700 INFO: task syz-executor7:10858 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D28880 10858 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 __rwsem_down_write_failed_common kernel/locking/rwsem-xadd.c:565 [inline] rwsem_down_write_failed+0x5e6/0xc90 kernel/locking/rwsem-xadd.c:594 call_rwsem_down_write_failed+0x17/0x30 arch/x86/lib/rwsem.S:117 __down_write arch/x86/include/asm/rwsem.h:142 [inline] down_write+0x58/0xa0 kernel/locking/rwsem.c:72 inode_lock include/linux/fs.h:713 [inline] do_truncate+0x120/0x1e0 fs/open.c:61 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e3b4c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e3b56cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071c238 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e3b5700 INFO: task syz-executor5:10829 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor5 D28760 10829 6308 0x80000002 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 io_schedule+0x21/0x80 kernel/sched/core.c:5179 wait_on_page_bit_common mm/filemap.c:1100 [inline] __lock_page+0x2b5/0x390 mm/filemap.c:1273 lock_page include/linux/pagemap.h:483 [inline] __revoke_inmem_pages+0xb35/0x11c0 fs/f2fs/segment.c:231 drop_inmem_pages+0xa3/0x3e0 fs/f2fs/segment.c:306 f2fs_release_file+0x2c7/0x330 fs/f2fs/file.c:1556 __fput+0x2c7/0x780 fs/file_table.c:209 ____fput+0x1a/0x20 fs/file_table.c:243 task_work_run+0x151/0x1d0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ba/0x30a0 kernel/exit.c:865 do_group_exit+0x13b/0x3a0 kernel/exit.c:968 get_signal+0x6bb/0x1650 kernel/signal.c:2482 do_signal+0x84/0x1b70 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x155/0x190 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x445/0x4e0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f1c68e74ce8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000071bf80 RCX: 00000000004497b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000071bf80 RBP: 000000000071bf80 R08: 0000000000000000 R09: 000000000071bf58 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f1c68e759c0 R15: 00007f1c68e75700 This patch tries to use trylock_page to mitigate such deadlock condition for fix. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:19 UTC |
ca597bd | Chao Yu | 23 February 2019, 01:48:27 UTC | f2fs: fix to dirty inode for i_mode recovery As Seulbae Kim reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202637 We didn't recover permission field correctly after sudden power-cut, the reason is in setattr we didn't add inode into global dirty list once i_mode is changed, so latter checkpoint triggered by fsync will not flush last i_mode into disk, result in this problem, fix it. Reported-by: Seulbae Kim <seulbae@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
428e3bc | Jaegeuk Kim | 25 February 2019, 17:46:45 UTC | f2fs: give random value to i_generation This follows to give random number to i_generation along with commit 232530680290b ("ext4: improve smp scalability for inode generation") This can be used for DUN for UFS HW encryption. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
613f3dc | Gao Xiang | 21 February 2019, 04:57:35 UTC | f2fs: no need to take page lock in readdir VFS will take inode_lock for readdir, therefore no need to take page lock in readdir at all just as the majority of other generic filesystems. This patch improves concurrency since .iterate_shared was introduced to VFS years ago. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
e46f6bd | Chao Yu | 21 February 2019, 12:40:13 UTC | f2fs: fix to update iostat correctly in IPU path In error path of IPU, we didn't account iostat correctly, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
6492a33 | Chao Yu | 21 February 2019, 12:37:14 UTC | f2fs: fix encrypted page memory leak For IPU path of f2fs_do_write_data_page(), in its error path, we need to release encrypted page and fscrypt context, otherwise it will cause memory leak. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
dc37910 | Chao Yu | 19 February 2019, 09:08:18 UTC | f2fs: make fault injection covering __submit_flush_wait() This patch changes to allow failure of f2fs_bio_alloc() in __submit_flush_wait(), which can simulate flush error in checkpoint() for covering more error paths. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:18 UTC |
aa2c8c4 | Chao Yu | 19 February 2019, 08:23:53 UTC | f2fs: fix to retry fill_super only if recovery failed With current retry mechanism in f2fs_fill_super, first fill_super fails due to no memory, then second fill_super runs w/o recovery, if we succeed, we may lose fsynced data, it doesn't make sense. Let's retry fill_super only if it occurs non-ENOMEM error during recovery. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:17 UTC |
bc73a4b | Gao Xiang | 19 February 2019, 02:31:52 UTC | f2fs: silence VM_WARN_ON_ONCE in mempool_alloc Note that __GFP_ZERO is not supported for mempool_alloc, which also documented in the mempool_alloc comments. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:17 UTC |
68b79cd | Zeng Guangyue | 18 February 2019, 06:26:41 UTC | f2fs: correct spelling mistake correct spelling mistake for "nunmber" Signed-off-by: Zeng Guangyue <zengguangyue@hisilicon.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:17 UTC |
0af725f | Jaegeuk Kim | 16 February 2019, 03:04:38 UTC | f2fs: fix wrong #endif We have to cover whole headerfile with last #endif. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> | 13 March 2019, 01:59:11 UTC |
d664ce7 | Stephen Rothwell | 22 February 2019, 05:14:45 UTC | remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" The commit 82c5de0ab8db ("dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag") removed the "flags" parameter for dma_declare_coherent_memory(). Remove the parameter from the call in rproc_add_virtio_dev(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [bjorn: Extended commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> | 13 March 2019, 00:00:42 UTC |
22782b3 | Rafael J. Wysocki | 12 March 2019, 18:13:13 UTC | cpuidle: governor: Add new governors to cpuidle_governors again After commit 61cb5758d3c4 ("cpuidle: Add cpuidle.governor= command line parameter") new cpuidle governors are not added to the list of available governors, so governor selection via sysfs doesn't work as expected (even though it is rarely used anyway). Fix that by making cpuidle_register_governor() add new governors to cpuidle_governors again. Fixes: 61cb5758d3c4 ("cpuidle: Add cpuidle.governor= command line parameter") Reported-by: Kees Cook <keescook@chromium.org> Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 12 March 2019, 22:46:55 UTC |
ebc551f | Linus Torvalds | 12 March 2019, 22:06:54 UTC | Merge tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux Pull NFS server updates from Bruce Fields: "Miscellaneous NFS server fixes. Probably the most visible bug is one that could artificially limit NFSv4.1 performance by limiting the number of oustanding rpcs from a single client. Neil Brown also gets a special mention for fixing a 14.5-year-old memory-corruption bug in the encoding of NFSv3 readdir responses" * tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux: nfsd: allow nfsv3 readdir request to be larger. nfsd: fix wrong check in write_v4_end_grace() nfsd: fix memory corruption caused by readdir nfsd: fix performance-limiting session calculation svcrpc: fix UDP on servers with lots of threads svcrdma: Remove syslog warnings in work completion handlers svcrdma: Squelch compiler warning when SUNRPC_DEBUG is disabled svcrdma: Use struct_size() in kmalloc() svcrpc: fix unlikely races preventing queueing of sockets svcrpc: svc_xprt_has_something_to_do seems a little long SUNRPC: Don't allow compiler optimisation of svc_xprt_release_slot() nfsd: fix an IS_ERR() vs NULL check | 12 March 2019, 22:06:54 UTC |
a5adcfc | Linus Torvalds | 12 March 2019, 22:03:21 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A large number of bug fixes and cleanups. One new feature to allow users to more easily find the jbd2 journal thread for a particular ext4 file system" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits) jbd2: jbd2_get_transaction does not need to return a value jbd2: fix invalid descriptor block checksum ext4: fix bigalloc cluster freeing when hole punching under load ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task ext4: Change debugging support help prefix from EXT4 to Ext4 ext4: fix compile error when using BUFFER_TRACE jbd2: fix compile warning when using JBUFFER_TRACE ext4: fix some error pointer dereferences ext4: annotate more implicit fall throughs ext4: annotate implicit fall throughs ext4: don't update s_rev_level if not required jbd2: fold jbd2_superblock_csum_{verify,set} into their callers jbd2: fix race when writing superblock ext4: fix crash during online resizing ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT ext4: add mask of ext4 flags to swap ext4: update quota information while swapping boot loader inode ext4: cleanup pagecache before swap i_data ext4: fix check of inode in swap_inode_boot_loader ext4: unlock unused_pages timely when doing writeback ... | 12 March 2019, 22:03:21 UTC |