Revision 3ddc76dfc786cc6f87852693227fb0b1f124f807 authored by Linus Torvalds on 25 December 2016, 22:30:04 UTC, committed by Linus Torvalds on 25 December 2016, 22:30:04 UTC
Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
Makefile.lib
# Backward compatibility
asflags-y += $(EXTRA_AFLAGS)
ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
#
# flags that take effect in sub directories
export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
# Figure out what we need to build from the various variables
# ===========================================================================
# When an object is listed to be built compiled-in and modular,
# only build the compiled-in version
obj-m := $(filter-out $(obj-y),$(obj-m))
# Libraries are always collected in one lib file.
# Filter out objects already built-in
lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
# Handle objects in subdirs
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
# and add the directory to the list of dirs to descend into: $(subdir-y)
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
# and add the directory to the list of dirs to descend into: $(subdir-m)
# Determine modorder.
# Unfortunately, we don't have information about ordering between -y
# and -m subdirs. Just put -y's first.
modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
obj-m := $(filter-out %/, $(obj-m))
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
# if $(foo-objs) exists, foo.o is a composite object
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
multi-used := $(multi-used-y) $(multi-used-m)
single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
# Build list of the parts of our composite objects, our composite
# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs := $(multi-objs-y) $(multi-objs-m)
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))
# $(obj-dirs) is a list of directories that contain object files
obj-dirs := $(dir $(multi-objs) $(obj-y))
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
# Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y))
always := $(addprefix $(obj)/,$(always))
targets := $(addprefix $(obj)/,$(targets))
modorder := $(addprefix $(obj)/,$(modorder))
obj-y := $(addprefix $(obj)/,$(obj-y))
obj-m := $(addprefix $(obj)/,$(obj-m))
lib-y := $(addprefix $(obj)/,$(lib-y))
subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
single-used-m := $(addprefix $(obj)/,$(single-used-m))
multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
# end up in (or would, if it gets compiled in)
# Note: Files that end up in two or more modules are compiled without the
# KBUILD_MODNAME definition. The reason is that any made-up name would
# differ in different configs.
name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
modname_flags = $(if $(filter 1,$(words $(modname))),\
-DKBUILD_MODNAME=$(call name-fix,$(modname)))
orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
$(asflags-y) $(AFLAGS_$(basetarget).o)
_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
#
# Enable gcov profiling flags for a file, directory or for all files depending
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
# (in this order)
#
ifeq ($(CONFIG_GCOV_KERNEL),y)
_c_flags += $(if $(patsubst n%,, \
$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
$(CFLAGS_GCOV))
endif
#
# Enable address sanitizer flags for kernel except some files or directories
# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
#
ifeq ($(CONFIG_KASAN),y)
_c_flags += $(if $(patsubst n%,, \
$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
$(CFLAGS_KASAN))
endif
ifeq ($(CONFIG_UBSAN),y)
_c_flags += $(if $(patsubst n%,, \
$(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
$(CFLAGS_UBSAN))
endif
ifeq ($(CONFIG_KCOV),y)
_c_flags += $(if $(patsubst n%,, \
$(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
$(CFLAGS_KCOV))
endif
# If building the kernel in a separate objtree expand all occurrences
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
ifeq ($(KBUILD_SRC),)
__c_flags = $(_c_flags)
__a_flags = $(_a_flags)
__cpp_flags = $(_cpp_flags)
else
# -I$(obj) locates generated .h files
# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
# and locates generated .h files
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
__c_flags = $(if $(obj),-I$(srctree)/$(src) -I$(obj)) \
$(call flags,_c_flags)
__a_flags = $(call flags,_a_flags)
__cpp_flags = $(call flags,_cpp_flags)
endif
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
$(__c_flags) $(modkern_cflags) \
$(basename_flags) $(modname_flags)
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
$(__a_flags) $(modkern_aflags)
cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
$(__cpp_flags)
ld_flags = $(LDFLAGS) $(ldflags-y)
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
-I$(srctree)/arch/$(SRCARCH)/boot/dts \
-I$(srctree)/arch/$(SRCARCH)/boot/dts/include \
-I$(srctree)/drivers/of/testcase-data \
-undef -D__DTS__
# Finds the multi-part object the current object will be linked into
modname-multi = $(sort $(foreach m,$(multi-used),\
$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
# Useful for describing the dependency of composite objects
# Usage:
# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
define multi_depend
$(foreach m, $(notdir $1), \
$(eval $(obj)/$m: \
$(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
endef
ifdef REGENERATE_PARSERS
# GPERF
# ---------------------------------------------------------------------------
quiet_cmd_gperf = GPERF $@
cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
.PRECIOUS: $(src)/%.hash.c_shipped
$(src)/%.hash.c_shipped: $(src)/%.gperf
$(call cmd,gperf)
# LEX
# ---------------------------------------------------------------------------
LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
quiet_cmd_flex = LEX $@
cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
.PRECIOUS: $(src)/%.lex.c_shipped
$(src)/%.lex.c_shipped: $(src)/%.l
$(call cmd,flex)
# YACC
# ---------------------------------------------------------------------------
YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
quiet_cmd_bison = YACC $@
cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
.PRECIOUS: $(src)/%.tab.c_shipped
$(src)/%.tab.c_shipped: $(src)/%.y
$(call cmd,bison)
quiet_cmd_bison_h = YACC $@
cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
.PRECIOUS: $(src)/%.tab.h_shipped
$(src)/%.tab.h_shipped: $(src)/%.y
$(call cmd,bison_h)
endif
# Shipped files
# ===========================================================================
quiet_cmd_shipped = SHIPPED $@
cmd_shipped = cat $< > $@
$(obj)/%: $(src)/%_shipped
$(call cmd,shipped)
# Commands useful for building a boot image
# ===========================================================================
#
# Use as following:
#
# target: source(s) FORCE
# $(if_changed,ld/objcopy/gzip)
#
# and add target to extra-y so that we know we have to
# read in the saved command line
# Linking
# ---------------------------------------------------------------------------
quiet_cmd_ld = LD $@
cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
$(filter-out FORCE,$^) -o $@
# Objcopy
# ---------------------------------------------------------------------------
quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
# Gzip
# ---------------------------------------------------------------------------
quiet_cmd_gzip = GZIP $@
cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
(rm -f $@ ; false)
# DTC
# ---------------------------------------------------------------------------
DTC ?= $(objtree)/scripts/dtc/dtc
# Disable noisy checks by default
ifeq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
DTC_FLAGS += -Wno-unit_address_vs_reg
endif
# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB $@
cmd_dt_S_dtb= \
( \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
echo '.global __dtb_$(*F)_begin'; \
echo '__dtb_$(*F)_begin:'; \
echo '.incbin "$<" '; \
echo '__dtb_$(*F)_end:'; \
echo '.global __dtb_$(*F)_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
) > $@
$(obj)/%.dtb.S: $(obj)/%.dtb
$(call cmd,dt_S_dtb)
quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O dtb -o $@ -b 0 \
-i $(dir $<) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
$(obj)/%.dtb: $(src)/%.dts FORCE
$(call if_changed_dep,dtc)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
# Bzip2
# ---------------------------------------------------------------------------
# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell \
dec_size=0; \
for F in $1; do \
fsize=$$(stat -c "%s" $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
printf "%08x\n" $$dec_size | \
sed 's/\(..\)/\1 /g' | { \
read ch0 ch1 ch2 ch3; \
for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
printf '%s%03o' '\\' $$((0x$$ch)); \
done; \
} \
)
quiet_cmd_bzip2 = BZIP2 $@
cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
quiet_cmd_lzo = LZO $@
cmd_lzo = (cat $(filter-out FORCE,$^) | \
lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
quiet_cmd_lz4 = LZ4 $@
cmd_lz4 = (cat $(filter-out FORCE,$^) | \
lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
# U-Boot mkimage
# ---------------------------------------------------------------------------
MKIMAGE := $(srctree)/scripts/mkuboot.sh
# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
# the number of overrides in arch makefiles
UIMAGE_ARCH ?= $(SRCARCH)
UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
UIMAGE_OPTS-y ?=
UIMAGE_TYPE ?= kernel
UIMAGE_LOADADDR ?= arch_must_set_this
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
UIMAGE_IN ?= $<
UIMAGE_OUT ?= $@
quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
-T $(UIMAGE_TYPE) \
-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
#
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
# of the kernel decompressor. A BCJ filter is used if it is available for
# the target architecture. xzkern also appends uncompressed size of the data
# using size_append. The .xz format has the size information available at
# the end of the file too, but it's in more complex format and it's good to
# avoid changing the part of the boot code that reads the uncompressed size.
# Note that the bytes added by size_append will make the xz tool think that
# the file is corrupt. This is expected.
#
# xzmisc doesn't use size_append, so it can be used to create normal .xz
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
cmd_xzkern = (cat $(filter-out FORCE,$^) | \
sh $(srctree)/scripts/xz_wrap.sh && \
$(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
quiet_cmd_xzmisc = XZMISC $@
cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
(rm -f $@ ; false)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...