https://github.com/torvalds/linux
Revision 3e26c5feed2add218046ecf91bab3cfa9bf762a6 authored by Rafael J. Wysocki on 13 June 2019, 21:59:45 UTC, committed by Rafael J. Wysocki on 13 June 2019, 22:03:27 UTC
Commit d491f2b75237 ("PCI: PM: Avoid possible suspend-to-idle issue") attempted to avoid a problem with devices whose drivers want them to stay in D0 over suspend-to-idle and resume, but it did not go as far as it should with that. Namely, first of all, the power state of a PCI bridge with a downstream device in D0 must be D0 (based on the PCI PM spec r1.2, sec 6, table 6-1, if the bridge is not in D0, there can be no PCI transactions on its secondary bus), but that is not actively enforced during system-wide PM transitions, so use the skip_bus_pm flag introduced by commit d491f2b75237 for that. Second, the configuration of devices left in D0 (whatever the reason) during suspend-to-idle need not be changed and attempting to put them into D0 again by force is pointless, so explicitly avoid doing that. Fixes: d491f2b75237 ("PCI: PM: Avoid possible suspend-to-idle issue") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
1 parent d1fdb6d
Tip revision: 3e26c5feed2add218046ecf91bab3cfa9bf762a6 authored by Rafael J. Wysocki on 13 June 2019, 21:59:45 UTC
PCI: PM: Skip devices in D0 for suspend-to-idle
PCI: PM: Skip devices in D0 for suspend-to-idle
Tip revision: 3e26c5f
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 14.6 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 71 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.6 KB |
.mailmap | -rw-r--r-- | 11.9 KB |
COPYING | -rw-r--r-- | 423 bytes |
CREDITS | -rw-r--r-- | 97.2 KB |
Kbuild | -rw-r--r-- | 1.5 KB |
Kconfig | -rw-r--r-- | 563 bytes |
MAINTAINERS | -rw-r--r-- | 499.9 KB |
Makefile | -rw-r--r-- | 58.8 KB |
README | -rw-r--r-- | 727 bytes |
Computing file changes ...