Revision 416d85b08840123451c224d97099d9a6dff6cf38 authored by Sacha Verweij on 11 March 2017, 20:47:50 UTC, committed by Sacha Verweij on 12 March 2017, 16:20:10 UTC
1 parent 0e970f0
TestHelpers.jl
# This file is a part of Julia. License is MIT: http://julialang.org/license
module TestHelpers
include("dimensionful.jl")
export Furlong
mutable struct FakeTerminal <: Base.Terminals.UnixTerminal
in_stream::Base.IO
out_stream::Base.IO
err_stream::Base.IO
hascolor::Bool
raw::Bool
FakeTerminal(stdin,stdout,stderr,hascolor=true) =
new(stdin,stdout,stderr,hascolor,false)
end
Base.Terminals.hascolor(t::FakeTerminal) = t.hascolor
Base.Terminals.raw!(t::FakeTerminal, raw::Bool) = t.raw = raw
Base.Terminals.size(t::FakeTerminal) = (24, 80)
function open_fake_pty()
const O_RDWR = Base.Filesystem.JL_O_RDWR
const O_NOCTTY = Base.Filesystem.JL_O_NOCTTY
fdm = ccall(:posix_openpt, Cint, (Cint,), O_RDWR|O_NOCTTY)
fdm == -1 && error("Failed to open PTY master")
rc = ccall(:grantpt, Cint, (Cint,), fdm)
rc != 0 && error("grantpt failed")
rc = ccall(:unlockpt, Cint, (Cint,), fdm)
rc != 0 && error("unlockpt")
fds = ccall(:open, Cint, (Ptr{UInt8}, Cint),
ccall(:ptsname, Ptr{UInt8}, (Cint,), fdm), O_RDWR|O_NOCTTY)
# slave
slave = RawFD(fds)
master = Base.TTY(RawFD(fdm); readable = true)
slave, master
end
function with_fake_pty(f)
slave, master = open_fake_pty()
f(slave, master)
ccall(:close,Cint,(Cint,),slave) # XXX: this causes the kernel to throw away all unread data on the pty
close(master)
end
# OffsetArrays (arrays with indexing that doesn't start at 1)
# This test file is designed to exercise support for generic indexing,
# even though offset arrays aren't implemented in Base.
module OAs
using Base: Indices, IndexCartesian, IndexLinear, tail
export OffsetArray
struct OffsetArray{T,N,AA<:AbstractArray} <: AbstractArray{T,N}
parent::AA
offsets::NTuple{N,Int}
end
OffsetVector{T,AA<:AbstractArray} = OffsetArray{T,1,AA}
OffsetArray{T,N}(A::AbstractArray{T,N}, offsets::NTuple{N,Int}) = OffsetArray{T,N,typeof(A)}(A, offsets)
OffsetArray{T,N}(A::AbstractArray{T,N}, offsets::Vararg{Int,N}) = OffsetArray(A, offsets)
(::Type{OffsetArray{T,N}}){T,N}(inds::Indices{N}) = OffsetArray{T,N,Array{T,N}}(Array{T,N}(map(length, inds)), map(indsoffset, inds))
(::Type{OffsetArray{T}}){T,N}(inds::Indices{N}) = OffsetArray{T,N}(inds)
Base.IndexStyle{T<:OffsetArray}(::Type{T}) = Base.IndexStyle(parenttype(T))
parenttype{T,N,AA}(::Type{OffsetArray{T,N,AA}}) = AA
parenttype(A::OffsetArray) = parenttype(typeof(A))
Base.parent(A::OffsetArray) = A.parent
errmsg(A) = error("size not supported for arrays with indices $(indices(A)); see http://docs.julialang.org/en/latest/devdocs/offset-arrays/")
Base.size(A::OffsetArray) = errmsg(A)
Base.size(A::OffsetArray, d) = errmsg(A)
Base.eachindex(::IndexCartesian, A::OffsetArray) = CartesianRange(indices(A))
Base.eachindex(::IndexLinear, A::OffsetVector) = indices(A, 1)
# Implementations of indices and indices1. Since bounds-checking is
# performance-critical and relies on indices, these are usually worth
# optimizing thoroughly.
@inline Base.indices(A::OffsetArray, d) = 1 <= d <= length(A.offsets) ? indices(parent(A))[d] + A.offsets[d] : (1:1)
@inline Base.indices(A::OffsetArray) = _indices(indices(parent(A)), A.offsets) # would rather use ntuple, but see #15276
@inline _indices(inds, offsets) = (inds[1]+offsets[1], _indices(tail(inds), tail(offsets))...)
_indices(::Tuple{}, ::Tuple{}) = ()
Base.indices1{T}(A::OffsetArray{T,0}) = 1:1 # we only need to specialize this one
function Base.similar(A::OffsetArray, T::Type, dims::Dims)
B = similar(parent(A), T, dims)
end
function Base.similar(A::AbstractArray, T::Type, inds::Tuple{UnitRange,Vararg{UnitRange}})
B = similar(A, T, map(length, inds))
OffsetArray(B, map(indsoffset, inds))
end
Base.similar(f::Union{Function,Type}, shape::Tuple{UnitRange,Vararg{UnitRange}}) = OffsetArray(f(map(length, shape)), map(indsoffset, shape))
Base.reshape(A::AbstractArray, inds::Tuple{UnitRange,Vararg{UnitRange}}) = OffsetArray(reshape(A, map(length, inds)), map(indsoffset, inds))
@inline function Base.getindex{T,N}(A::OffsetArray{T,N}, I::Vararg{Int,N})
checkbounds(A, I...)
@inbounds ret = parent(A)[offset(A.offsets, I)...]
ret
end
# Vectors don't support one-based linear indexing; they always use the offsets
@inline function Base.getindex(A::OffsetVector, i::Int)
checkbounds(A, i)
@inbounds ret = parent(A)[offset(A.offsets, (i,))[1]]
ret
end
# But multidimensional arrays allow one-based linear indexing
@inline function Base.getindex(A::OffsetArray, i::Int)
checkbounds(A, i)
@inbounds ret = parent(A)[i]
ret
end
@inline function Base.setindex!{T,N}(A::OffsetArray{T,N}, val, I::Vararg{Int,N})
checkbounds(A, I...)
@inbounds parent(A)[offset(A.offsets, I)...] = val
val
end
@inline function Base.setindex!(A::OffsetVector, val, i::Int)
checkbounds(A, i)
@inbounds parent(A)[offset(A.offsets, (i,))[1]] = val
val
end
@inline function Base.setindex!(A::OffsetArray, val, i::Int)
checkbounds(A, i)
@inbounds parent(A)[i] = val
val
end
# Computing a shifted index (subtracting the offset)
offset{N}(offsets::NTuple{N,Int}, inds::NTuple{N,Int}) = _offset((), offsets, inds)
_offset(out, ::Tuple{}, ::Tuple{}) = out
@inline _offset(out, offsets, inds) = _offset((out..., inds[1]-offsets[1]), Base.tail(offsets), Base.tail(inds))
indsoffset(r::Range) = first(r) - 1
indsoffset(i::Integer) = 0
end
end
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...