Revision 426a593e641ebf0d9288f0a2fcab644a86820220 authored by Vincent Chen on 21 November 2018, 01:38:11 UTC, committed by David S. Miller on 22 November 2018, 00:57:39 UTC
In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 395048e
File | Mode | Size |
---|---|---|
Documentation | ||
LICENSES | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | -rw-r--r-- | 12.7 KB |
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.5 KB |
.mailmap | -rw-r--r-- | 10.5 KB |
COPYING | -rw-r--r-- | 423 bytes |
CREDITS | -rw-r--r-- | 96.5 KB |
Kbuild | -rw-r--r-- | 2.2 KB |
Kconfig | -rw-r--r-- | 563 bytes |
MAINTAINERS | -rw-r--r-- | 470.9 KB |
Makefile | -rw-r--r-- | 59.7 KB |
README | -rw-r--r-- | 727 bytes |
Computing file changes ...