| 43f70c9 | Linus Torvalds | 20 April 2018, 16:08:37 UTC | Merge tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Minor cleanups and a bug fix to completely ignore unencrypted filenames in the lower filesystem when filename encryption is enabled at the eCryptfs layer" * tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: don't pass up plaintext names when using filename encryption ecryptfs: fix spelling mistake: "cadidate" -> "candidate" ecryptfs: lookup: Don't check if mount_crypt_stat is NULL | 20 April 2018, 16:08:37 UTC |
| 0d9cf33 | Linus Torvalds | 20 April 2018, 16:01:26 UTC | Merge tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs - isofs memory leak fix - two fsnotify fixes of event mask handling - udf fix of UTF-16 handling - couple other smaller cleanups * tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix leak of UTF-16 surrogates into encoded strings fs: ext2: Adding new return type vm_fault_t isofs: fix potential memory leak in mount option parsing MAINTAINERS: add an entry for FSNOTIFY infrastructure fsnotify: fix typo in a comment about mark->g_list fsnotify: fix ignore mask logic in send_to_group() isofs compress: Remove VLA usage fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init fanotify: fix logic of events on child | 20 April 2018, 16:01:26 UTC |
| 4d18905 | Linus Torvalds | 20 April 2018, 15:55:30 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - suspend/resume handling fix for Raydium I2C-connected touchscreen from Aaron Ma - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong Skomra - battery level reporting fix on BT-connected mice from Dmitry Torokhov - hidraw race condition fix from Rodrigo Rivas Costa * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix inverted return value from i2c_hid_command() HID: i2c-hid: Fix resume issue on Raydium touchscreen device HID: wacom: bluetooth: send exit report for recent Bluetooth devices HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device HID: input: fix battery level reporting on BT mice | 20 April 2018, 15:55:30 UTC |
| 41e3bef | Linus Torvalds | 20 April 2018, 15:51:55 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "Shadow variable API list_head initialization fix from Petr Mladek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Allow to call a custom callback when freeing shadow variables livepatch: Initialize shadow variables safely by a custom callback | 20 April 2018, 15:51:55 UTC |
| 36e584d | Linus Torvalds | 20 April 2018, 15:36:04 UTC | Merge tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe | 20 April 2018, 15:36:04 UTC |
| 854da23 | Linus Torvalds | 20 April 2018, 15:25:31 UTC | Merge tag 'mips_fixes_4.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: - io: Add barriers to read*() & write*() - dts: Fix boston PCI bus DTC warnings (4.17) - memset: Several corner case fixes (one 3.10, others longer) * tag 'mips_fixes_4.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: uaccess: Add micromips clobbers to bzero invocation MIPS: memset.S: Fix clobber of v1 in last_fixup MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup MIPS: memset.S: EVA & fault support for small_memset MIPS: dts: Boston: Fix PCI bus dtc warnings: MIPS: io: Add barrier after register read in readX() MIPS: io: Prevent compiler reordering writeX() | 20 April 2018, 15:25:31 UTC |
| d08de37 | Linus Torvalds | 20 April 2018, 15:23:30 UTC | Merge tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix an off-by-one bug in our alternative asm patching which leads to incorrectly patched code. This bug lay dormant for nearly 10 years but we finally hit it due to a recent change. - Fix lockups when running KVM guests on Power8 due to a missing check when a thread that's running KVM comes out of idle. - Fix an out-of-spec behaviour in the XIVE code (P9 interrupt controller). - Fix EEH handling of bridge MMIO windows. - Prevent crashes in our RFI fallback flush handler if firmware didn't tell us the size of the L1 cache (only seen on simulators). Thanks to: Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling. * tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm: Fix lockups when running KVM guests on Power8 powerpc/eeh: Fix enabling bridge MMIO windows powerpc/xive: Fix trying to "push" an already active pool VP powerpc/64s: Default l1d_size to 64K in RFI fallback flush powerpc/lib: Fix off-by-one in alternate feature patching | 20 April 2018, 15:23:30 UTC |
| c2d94c5 | Linus Torvalds | 20 April 2018, 15:01:38 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes and kexec-file-load from Martin Schwidefsky: "After the common code kexec patches went in via Andrew we can now push the architecture parts to implement the kexec-file-load system call. Plus a few more bug fixes and cleanups, this includes an update to the default configurations" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/signal: cleanup uapi struct sigaction s390: rename default_defconfig to debug_defconfig s390: remove gcov defconfig s390: update defconfig s390: add support for IBM z14 Model ZR1 s390: remove couple of duplicate includes s390/boot: remove unused COMPILE_VERSION and ccflags-y s390/nospec: include cpu.h s390/decompressor: Ignore file vmlinux.bin.full s390/kexec_file: add generated files to .gitignore s390/Kconfig: Move kexec config options to "Processor type and features" s390/kexec_file: Add ELF loader s390/kexec_file: Add crash support to image loader s390/kexec_file: Add image loader s390/kexec_file: Add kexec_file_load system call s390/kexec_file: Add purgatory s390/kexec_file: Prepare setup.h for kexec_file_load s390/smsgiucv: disable SMSG on module unload s390/sclp: avoid potential usage of uninitialized value | 20 April 2018, 15:01:38 UTC |
| b658912 | Jiri Kosina | 19 April 2018, 07:25:15 UTC | HID: i2c-hid: fix inverted return value from i2c_hid_command() i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 19 April 2018, 07:25:15 UTC |
| 56376c5 | Michael Ellerman | 19 April 2018, 06:22:20 UTC | powerpc/kvm: Fix lockups when running KVM guests on Power8 When running KVM guests on Power8 we can see a lockup where one CPU stops responding. This often leads to a message such as: watchdog: CPU 136 detected hard LOCKUP on other CPUs 72 Task dump for CPU 72: qemu-system-ppc R running task 10560 20917 20908 0x00040004 And then backtraces on other CPUs, such as: Task dump for CPU 48: ksmd R running task 10032 1519 2 0x00000804 Call Trace: ... --- interrupt: 901 at smp_call_function_many+0x3c8/0x460 LR = smp_call_function_many+0x37c/0x460 pmdp_invalidate+0x100/0x1b0 __split_huge_pmd+0x52c/0xdb0 try_to_unmap_one+0x764/0x8b0 rmap_walk_anon+0x15c/0x370 try_to_unmap+0xb4/0x170 split_huge_page_to_list+0x148/0xa30 try_to_merge_one_page+0xc8/0x990 try_to_merge_with_ksm_page+0x74/0xf0 ksm_scan_thread+0x10ec/0x1ac0 kthread+0x160/0x1a0 ret_from_kernel_thread+0x5c/0x78 This is caused by commit 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle"), which added a check in pnv_powersave_wakeup() to see if the kvm_hstate.hwthread_state is already set to KVM_HWTHREAD_IN_KERNEL, and if so to skip the store and test of kvm_hstate.hwthread_req. The problem is that the primary does not set KVM_HWTHREAD_IN_KVM when entering the guest, so it can then come out to cede with KVM_HWTHREAD_IN_KERNEL set. It can then go idle in kvm_do_nap after setting hwthread_req to 1, but because hwthread_state is still KVM_HWTHREAD_IN_KERNEL we will skip the test of hwthread_req when we wake up from idle and won't go to kvm_start_guest. From there the thread will return somewhere garbage and crash. Fix it by skipping the store of hwthread_state, but not the test of hwthread_req, when coming out of idle. It's OK to skip the sync in that case because hwthread_req will have been set on the same thread, so there is no synchronisation required. Fixes: 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 19 April 2018, 06:22:20 UTC |
| 13a83ea | Michael Neuling | 11 April 2018, 03:37:58 UTC | powerpc/eeh: Fix enabling bridge MMIO windows On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset") Cc: stable@vger.kernel.org # v3.11+ Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 19 April 2018, 03:02:38 UTC |
| b3d7e55 | Matt Redfearn | 17 April 2018, 15:40:01 UTC | MIPS: uaccess: Add micromips clobbers to bzero invocation The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/19110/ Signed-off-by: James Hogan <jhogan@kernel.org> | 18 April 2018, 21:02:29 UTC |
| c96eebf | Matt Redfearn | 17 April 2018, 15:40:00 UTC | MIPS: memset.S: Fix clobber of v1 in last_fixup The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19109/ Signed-off-by: James Hogan <jhogan@kernel.org> | 18 April 2018, 20:57:29 UTC |
| 87ef120 | Linus Torvalds | 18 April 2018, 19:48:17 UTC | Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A couple of follow-up patches for -rc1 changes in rbd, support for a timeout on waiting for the acquisition of exclusive lock and a fix for uninitialized memory access in CephFS, marked for stable" * tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client: rbd: notrim map option rbd: adjust queue limits for "fancy" striping rbd: avoid Wreturn-type warnings ceph: always update atime/mtime/ctime for new inode rbd: support timeout in rbd_wait_state_locked() rbd: refactor rbd_wait_state_locked() | 18 April 2018, 19:48:17 UTC |
| b32e56e | Benjamin Herrenschmidt | 11 April 2018, 05:17:59 UTC | powerpc/xive: Fix trying to "push" an already active pool VP When setting up a CPU, we "push" (activate) a pool VP for it. However it's an error to do so if it already has an active pool VP. This happens when doing soft CPU hotplug on powernv since we don't tear down the CPU on unplug. The HW flags the error which gets captured by the diagnostics. Fix this by making sure to "pull" out any already active pool first. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 18 April 2018, 14:49:45 UTC |
| 44f06ba | Jan Kara | 12 April 2018, 15:22:23 UTC | udf: Fix leak of UTF-16 surrogates into encoded strings OSTA UDF specification does not mention whether the CS0 charset in case of two bytes per character encoding should be treated in UTF-16 or UCS-2. The sample code in the standard does not treat UTF-16 surrogates in any special way but on systems such as Windows which work in UTF-16 internally, filenames would be treated as being in UTF-16 effectively. In Linux it is more difficult to handle characters outside of Base Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte characters only. Just make sure we don't leak UTF-16 surrogates into the resulting string when loading names from the filesystem for now. CC: stable@vger.kernel.org # >= v4.6 Reported-by: Mingye Wang <arthur200126@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> | 18 April 2018, 14:34:55 UTC |
| daf70d8 | Matt Redfearn | 17 April 2018, 14:52:21 UTC | MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the memset_partial block, the value loaded into a2 on return is meaningless. The label .Lpartial_fixup\@ is jumped to on page fault. In order to work out how many bytes failed to copy, the exception handler should find how many bytes left in the partial block (andi a2, STORMASK), add that to the partial block end address (a2), and subtract the faulting address to get the remainder. Currently it incorrectly subtracts the partial block start address (t1), which has additionally been clobbered to generate a jump target in memset_partial. Fix this by adding the block end address instead. This issue was found with the following test code: int j, k; for (j = 0; j < 512; j++) { if ((k = clear_user(NULL, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64). Suggested-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19108/ Signed-off-by: James Hogan <jhogan@kernel.org> | 17 April 2018, 15:17:23 UTC |
| ebf04f3 | Simon Gaiser | 15 March 2018, 03:08:03 UTC | xen: xenbus_dev_frontend: Really return response string xenbus_command_reply() did not actually copy the response string and leaked stack content instead. Fixes: 9a6161fe73bd ("xen: return xenstore command failures via response instead of rc") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 17 April 2018, 12:29:08 UTC |
| cd6e992 | Oleksandr Andrushchenko | 12 April 2018, 17:26:27 UTC | xen/sndif: Sync up with the canonical definition in Xen This is the sync up with the canonical definition of the sound protocol in Xen: 1. Protocol version was referenced in the protocol description, but missed its definition. Fixed by adding a constant for current protocol version. 2. Some of the request descriptions have "reserved" fields missed: fixed by adding corresponding entries. 3. Extend the size of the requests and responses to 64 octets. Bump protocol version to 2. 4. Add explicit back and front synchronization In order to provide explicit synchronization between backend and frontend the following changes are introduced in the protocol: - add new ring buffer for sending asynchronous events from backend to frontend to report number of bytes played by the frontend (XENSND_EVT_CUR_POS) - introduce trigger events for playback control: start/stop/pause/resume - add "req-" prefix to event-channel and ring-ref to unify naming of the Xen event channels for requests and events 5. Add explicit back and front parameter negotiation In order to provide explicit stream parameter negotiation between backend and frontend the following changes are introduced in the protocol: add XENSND_OP_HW_PARAM_QUERY request to read/update configuration space for the parameters given: request passes desired parameter's intervals/masks and the response to this request returns allowed min/max intervals/masks to be used. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 17 April 2018, 12:26:33 UTC |
| 3b2c77d | Petr Mladek | 16 April 2018, 11:36:47 UTC | livepatch: Allow to call a custom callback when freeing shadow variables We might need to do some actions before the shadow variable is freed. For example, we might need to remove it from a list or free some data that it points to. This is already possible now. The user can get the shadow variable by klp_shadow_get(), do the necessary actions, and then call klp_shadow_free(). This patch allows to do it a more elegant way. The user could implement the needed actions in a callback that is passed to klp_shadow_free() as a parameter. The callback usually does reverse operations to the constructor callback that can be called by klp_shadow_*alloc(). It is especially useful for klp_shadow_free_all(). There we need to do these extra actions for each found shadow variable with the given ID. Note that the memory used by the shadow variable itself is still released later by rcu callback. It is needed to protect internal structures that keep all shadow variables. But the destructor is called immediately. The shadow variable must not be access anyway after klp_shadow_free() is called. The user is responsible to protect this any suitable way. Be aware that the destructor is called under klp_shadow_lock. It is the same as for the contructor in klp_shadow_alloc(). Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 17 April 2018, 11:42:48 UTC |
| e91c251 | Petr Mladek | 16 April 2018, 11:36:46 UTC | livepatch: Initialize shadow variables safely by a custom callback The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 17 April 2018, 11:42:48 UTC |
| 9dfbf78 | Madhavan Srinivasan | 17 January 2018, 19:03:36 UTC | powerpc/64s: Default l1d_size to 64K in RFI fallback flush If there is no d-cache-size property in the device tree, l1d_size could be zero. We don't actually expect that to happen, it's only been seen on mambo (simulator) in some configurations. A zero-size l1d_size leads to the loop in the asm wrapping around to 2^64-1, and then walking off the end of the fallback area and eventually causing a page fault which is fatal. Just default to 64K which is correct on some CPUs, and sane enough to not cause a crash on others. Fixes: aa8a5e0062ac9 ('powerpc/64s: Add support for RFI flush of L1-D cache') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Rewrite comment and change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 17 April 2018, 09:29:04 UTC |
| fae7649 | Martin Schwidefsky | 12 April 2018, 11:48:25 UTC | s390/signal: cleanup uapi struct sigaction The struct sigaction for user space in arch/s390/include/uapi/asm/signal.h is ill defined. The kernel uses two structures 'struct sigaction' and 'struct old_sigaction', the correlation in the kernel for both 31 and 64 bit is as follows sys_sigaction -> struct old_sigaction sys_rt_sigaction -> struct sigaction The correlation of the (single) uapi definition for 'struct sigaction' under '#ifndef __KERNEL__': 31-bit: sys_sigaction -> uapi struct sigaction 31-bit: sys_rt_sigaction -> no structure available 64-bit: sys_sigaction -> no structure available 64-bit: sys_rt_sigaction -> uapi struct sigaction This is quite confusing. To make it a bit less confusing make the uapi definition of 'struct sigaction' usable for sys_rt_sigaction for both 31-bit and 64-bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 17 April 2018, 08:36:12 UTC |
| a27fc14 | Linus Torvalds | 16 April 2018, 21:07:39 UTC | Merge branch 'parisc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc build fix from Helge Deller: "Fix build error because of missing binfmt_elf32.o file which is still mentioned in the Makefile" * 'parisc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix missing binfmt_elf32.o build error | 16 April 2018, 21:07:39 UTC |
| 8a8158c | Matt Redfearn | 29 March 2018, 09:28:23 UTC | MIPS: memset.S: EVA & fault support for small_memset The MIPS kernel memset / bzero implementation includes a small_memset branch which is used when the region to be set is smaller than a long (4 bytes on 32bit, 8 bytes on 64bit). The current small_memset implementation uses a simple store byte loop to write the destination. There are 2 issues with this implementation: 1. When EVA mode is active, user and kernel address spaces may overlap. Currently the use of the sb instruction means kernel mode addressing is always used and an intended write to userspace may actually overwrite some critical kernel data. 2. If the write triggers a page fault, for example by calling __clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS is triggered. Fix these issues by replacing the sb instruction with the EX() macro, which will emit EVA compatible instuctions as required. Additionally implement a fault fixup for small_memset which sets a2 to the number of bytes that could not be cleared (as defined by __clear_user). Reported-by: Chuanhua Lei <chuanhua.lei@intel.com> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18975/ Signed-off-by: James Hogan <jhogan@kernel.org> | 16 April 2018, 20:31:26 UTC |
| d95c884 | Linus Torvalds | 16 April 2018, 19:44:03 UTC | Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull missed timer updates from Thomas Gleixner: "This is a branch which got forgotten during the merge window, but it contains only fixes and hardware enablement. No fundamental changes. - Various fixes for the imx-tpm clocksource driver - A new timer driver for the NCPM7xx SoC family" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/imx-tpm: Add different counter width support clocksource/drivers/imx-tpm: Correct some registers operation flow clocksource/drivers/imx-tpm: Fix typo of clock name dt-bindings: timer: tpm: fix typo of clock name clocksource/drivers/npcm: Add NPCM7xx timer driver dt-binding: timer: document NPCM7xx timer DT bindings | 16 April 2018, 19:44:03 UTC |
| e86281e | Tyler Hicks | 28 March 2018, 23:41:52 UTC | eCryptfs: don't pass up plaintext names when using filename encryption Both ecryptfs_filldir() and ecryptfs_readlink_lower() use ecryptfs_decode_and_decrypt_filename() to translate lower filenames to upper filenames. The function correctly passes up lower filenames, unchanged, when filename encryption isn't in use. However, it was also passing up lower filenames when the filename wasn't encrypted or when decryption failed. Since 88ae4ab9802e, eCryptfs refuses to lookup lower plaintext names when filename encryption is enabled so this resulted in a situation where userspace would see lower plaintext filenames in calls to getdents(2) but then not be able to lookup those filenames. An example of this can be seen when enabling filename encryption on an eCryptfs mount at the root directory of an Ext4 filesystem: $ ls -1i /lower 12 ECRYPTFS_FNEK_ENCRYPTED.FWYZD8TcW.5FV-TKTEYOHsheiHX9a-w.NURCCYIMjI8pn5BDB9-h3fXwrE-- 11 lost+found $ ls -1i /upper ls: cannot access '/upper/lost+found': No such file or directory ? lost+found 12 test With this change, the lower lost+found dentry is ignored: $ ls -1i /lower 12 ECRYPTFS_FNEK_ENCRYPTED.FWYZD8TcW.5FV-TKTEYOHsheiHX9a-w.NURCCYIMjI8pn5BDB9-h3fXwrE-- 11 lost+found $ ls -1i /upper 12 test Additionally, some potentially noisy error/info messages in the related code paths are turned into debug messages so that the logs can't be easily filled. Fixes: 88ae4ab9802e ("ecryptfs_lookup(): try either only encrypted or plaintext name") Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> | 16 April 2018, 18:51:22 UTC |
| e6d9bfd | Linus Torvalds | 16 April 2018, 18:24:28 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Bug fixes, plus a new test case and the associated infrastructure for writing nested virtualization tests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: selftests: add vmx_tsc_adjust_test kvm: x86: move MSR_IA32_TSC handling to x86.c X86/KVM: Properly update 'tsc_offset' to represent the running guest kvm: selftests: add -std=gnu99 cflags x86: Add check for APIC access address for vmentry of L2 guests KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available kvm: selftests: fix spelling mistake: "divisable" and "divisible" X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted | 16 April 2018, 18:24:28 UTC |
| e6f39e8 | Joerg Roedel | 16 April 2018, 09:43:57 UTC | x86/ldt: Fix support_pte_mask filtering in map_ldt_struct() The |= operator will let us end up with an invalid PTE. Use the correct &= instead. [ The bug was also independently reported by Shuah Khan ] Fixes: fb43d6cb91ef ('x86/mm: Do not auto-massage page protections') Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 April 2018, 18:20:34 UTC |
| d5edb7f | Paolo Bonzini | 27 March 2018, 20:46:11 UTC | kvm: selftests: add vmx_tsc_adjust_test The test checks the behavior of setting MSR_IA32_TSC in a nested guest, and the TSC_OFFSET VMCS field in general. It also introduces the testing infrastructure for Intel nested virtualization. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 16 April 2018, 15:50:23 UTC |
| dd25993 | Paolo Bonzini | 13 April 2018, 09:38:35 UTC | kvm: x86: move MSR_IA32_TSC handling to x86.c This is not specific to Intel/AMD anymore. The TSC offset is available in vcpu->arch.tsc_offset. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 16 April 2018, 15:50:22 UTC |
| e79f245 | KarimAllah Ahmed | 14 April 2018, 03:10:52 UTC | X86/KVM: Properly update 'tsc_offset' to represent the running guest Update 'tsc_offset' on vmentry/vmexit of L2 guests to ensure that it always captures the TSC_OFFSET of the running guest whether it is the L1 or L2 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> [AMD changes, fix update_ia32_tsc_adjust_msr. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 16 April 2018, 15:50:11 UTC |
| b885858 | Michael Ellerman | 16 April 2018, 13:25:19 UTC | powerpc/lib: Fix off-by-one in alternate feature patching When we patch an alternate feature section, we have to adjust any relative branches that branch out of the alternate section. But currently we have a bug if we have a branch that points to past the last instruction of the alternate section, eg: FTR_SECTION_ELSE 1: b 2f or 6,6,6 2: ALT_FTR_SECTION_END(...) nop This will result in a relative branch at 1 with a target that equals the end of the alternate section. That branch does not need adjusting when it's moved to the non-else location. Currently we do adjust it, resulting in a branch that goes off into the link-time location of the else section, which is junk. The fix is to not patch branches that have a target == end of the alternate section. Fixes: d20fe50a7b3c ("KVM: PPC: Book3S HV: Branch inside feature section") Fixes: 9b1a735de64c ("powerpc: Add logic to patch alternative feature sections") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 16 April 2018, 14:37:48 UTC |
| de3d01f | Jia-Ju Bai | 11 April 2018, 01:15:31 UTC | xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add pcistub_reg_add() is never called in atomic context. pcistub_reg_add() is only called by pcistub_quirk_add, which is only set in DRIVER_ATTR(). Despite never getting called from atomic context, pcistub_reg_add() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 16 April 2018, 14:20:45 UTC |
| 230d211 | Jia-Ju Bai | 09 April 2018, 15:04:25 UTC | xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen_pcibk_config_quirks_init() is never called in atomic context. The call chains ending up at xen_pcibk_config_quirks_init() are: [1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 16 April 2018, 14:20:31 UTC |
| 9eb5f15 | Jia-Ju Bai | 09 April 2018, 15:04:12 UTC | xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc pcistub_device_alloc() is never called in atomic context. The call chain ending up at pcistub_device_alloc() is: [1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe() pcistub_probe() is only set as ".probe" in struct pci_driver. This function is not called in atomic context. Despite never getting called from atomic context, pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 16 April 2018, 14:20:21 UTC |
| bb52e31 | Jia-Ju Bai | 09 April 2018, 15:03:53 UTC | xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device pcistub_init_device() is never called in atomic context. The call chain ending up at pcistub_init_device() is: [1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, pcistub_init_device() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 16 April 2018, 14:20:12 UTC |
| cc5cd50 | Jia-Ju Bai | 09 April 2018, 15:03:36 UTC | xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe pcistub_probe() is never called in atomic context. This function is only set as ".probe" in struct pci_driver. Despite never getting called from atomic context, pcistub_probe() calls kmalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 16 April 2018, 14:19:52 UTC |
| 2c2bf52 | Matt Redfearn | 13 April 2018, 08:50:44 UTC | MIPS: dts: Boston: Fix PCI bus dtc warnings: dtc recently (v1.4.4-8-g756ffc4f52f6) added PCI bus checks. Fix the warnings now emitted: arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@10000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@12000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@14000000: missing bus-range for PCI bridge Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19070/ Signed-off-by: James Hogan <jhogan@kernel.org> | 16 April 2018, 09:37:49 UTC |
| 49d23a8 | Heiko Carstens | 12 April 2018, 09:01:07 UTC | s390: rename default_defconfig to debug_defconfig The name debug_defconfig reflects what the config is actually good for and should be less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 08:29:35 UTC |
| cd7cf57 | Heiko Carstens | 12 April 2018, 09:00:31 UTC | s390: remove gcov defconfig This config is not needed anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 08:29:35 UTC |
| de20111 | Martin Schwidefsky | 20 November 2017, 07:48:02 UTC | s390: update defconfig Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 08:29:34 UTC |
| 0685693 | Souptick Joarder | 14 April 2018, 19:33:42 UTC | fs: ext2: Adding new return type vm_fault_t Use new return type vm_fault_t for page_mkwrite, pfn_mkwrite and fault handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jan Kara <jack@suse.cz> | 16 April 2018, 07:52:24 UTC |
| 4f34a51 | Chengguang Xu | 14 April 2018, 12:16:06 UTC | isofs: fix potential memory leak in mount option parsing When specifying string type mount option (e.g., iocharset) several times in a mount, current option parsing may cause memory leak. Hence, call kfree for previous one in this case. Meanwhile, check memory allocation result for it. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Kara <jack@suse.cz> | 16 April 2018, 07:47:41 UTC |
| d936054 | Ilya Dryomov | 23 March 2018, 05:14:47 UTC | rbd: notrim map option Add an option to turn off discard and write zeroes offload support to avoid deprovisioning a fully provisioned image. When enabled, discard requests will fail with -EOPNOTSUPP, write zeroes requests will fall back to manually zeroing. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Hitoshi Kamei <hitoshi.kamei.xm@hitachi.com> | 16 April 2018, 07:38:40 UTC |
| 420efbd | Ilya Dryomov | 16 April 2018, 07:32:18 UTC | rbd: adjust queue limits for "fancy" striping In order to take full advantage of merging in ceph_file_to_extents(), allow object set sized I/Os. If the layout is not "fancy", an object set consists of just one object. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 16 April 2018, 07:38:40 UTC |
| c6244b3 | Arnd Bergmann | 04 April 2018, 12:53:39 UTC | rbd: avoid Wreturn-type warnings In some configurations gcc cannot see that rbd_assert(0) leads to an unreachable code path: drivers/block/rbd.c: In function 'rbd_img_is_write': drivers/block/rbd.c:1397:1: error: control reaches end of non-void function [-Werror=return-type] drivers/block/rbd.c: In function '__rbd_obj_handle_request': drivers/block/rbd.c:2499:1: error: control reaches end of non-void function [-Werror=return-type] drivers/block/rbd.c: In function 'rbd_obj_handle_write': drivers/block/rbd.c:2471:1: error: control reaches end of non-void function [-Werror=return-type] As the rbd_assert() here shows has no extra information beyond the verbose BUG(), we can simply use BUG() directly in its place. This is reliably detected as not returning on any architecture, since it doesn't depend on the unlikely() comparison that confused gcc. Fixes: 3da691bf4366 ("rbd: new request handling code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 16 April 2018, 07:38:40 UTC |
| ffdeec7 | Yan, Zheng | 26 March 2018, 08:46:39 UTC | ceph: always update atime/mtime/ctime for new inode For new inode, atime/mtime/ctime are uninitialized. Don't compare against them. Cc: stable@kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 16 April 2018, 07:38:40 UTC |
| 34f55d0 | Dongsheng Yang | 26 March 2018, 14:22:55 UTC | rbd: support timeout in rbd_wait_state_locked() currently, the rbd_wait_state_locked() will wait forever if we can't get our state locked. Example: rbd map --exclusive test1 --> /dev/rbd0 rbd map test1 --> /dev/rbd1 dd if=/dev/zero of=/dev/rbd1 bs=1M count=1 --> IO blocked To avoid this problem, this patch introduce a timeout design in rbd_wait_state_locked(). Then rbd_wait_state_locked() will return error when we reach a timeout. This patch allow user to set the lock_timeout in rbd mapping. Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 16 April 2018, 07:38:40 UTC |
| 2f18d46 | Ilya Dryomov | 04 April 2018, 08:15:38 UTC | rbd: refactor rbd_wait_state_locked() In preparation for lock_timeout option, make rbd_wait_state_locked() return error codes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 16 April 2018, 07:38:40 UTC |
| 451239e | Heiko Carstens | 13 April 2018, 12:04:24 UTC | s390: add support for IBM z14 Model ZR1 Just add the new machine type number to the two places that matter. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:24 UTC |
| f43c426 | Vasily Gorbik | 13 April 2018, 08:57:27 UTC | s390: remove couple of duplicate includes Removing couple of duplicate includes, found by "make includecheck". That leaves 1 duplicate include in arch/s390/kernel/entry.S, which is there for a reason (it includes generated asm/syscall_table.h twice). Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:24 UTC |
| c65bbb5 | Vasily Gorbik | 11 April 2018, 08:24:29 UTC | s390/boot: remove unused COMPILE_VERSION and ccflags-y ccflags-y has no effect (no code is built in that directory, arch/s390/boot/compressed/Makefile defines its own KBUILD_CFLAGS). Removing ccflags-y together with COMPILE_VERSION. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:24 UTC |
| 232acdf | Sebastian Ott | 10 April 2018, 10:39:34 UTC | s390/nospec: include cpu.h Fix the following sparse warnings: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? symbol 'cpu_show_spectre_v2' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:23 UTC |
| 701e188 | Thomas Richter | 12 April 2018, 07:42:48 UTC | s390/decompressor: Ignore file vmlinux.bin.full Commit 81796a3c6a4a ("s390/decompressor: trim uncompressed image head during the build") introduced a new file named vmlinux.bin.full in directory arch/s390/boot/compressed. Add this file to the list of ignored files so it does not show up on git status. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:23 UTC |
| de66b24 | Heiko Carstens | 12 April 2018, 11:45:52 UTC | s390/kexec_file: add generated files to .gitignore Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:23 UTC |
| bdea9f6 | Philipp Rudo | 27 March 2018, 11:14:12 UTC | s390/Kconfig: Move kexec config options to "Processor type and features" The config options for kexec are currently not under any menu directory. Up until now this was not a problem as standard kexec is always compiled in and thus does not create a menu entry. This changed when kexec_file_load was enabled. Its config option requires a menu entry which, when added beneath standard kexec option, appears on the main directory above "General Setup". Thus move the whole block further down such that the entry in now in "Processor type and features". While at it also update the help text for kexec file. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:23 UTC |
| 8be0188 | Philipp Rudo | 11 September 2017, 13:15:29 UTC | s390/kexec_file: Add ELF loader Add an ELF loader for kexec_file. The main task here is to do proper sanity checks on the ELF file. Basically all other functionality was already implemented for the image loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:23 UTC |
| ee337f5 | Philipp Rudo | 05 September 2017, 09:55:23 UTC | s390/kexec_file: Add crash support to image loader Add support to load a crash kernel to the image loader. This requires extending the purgatory. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:22 UTC |
| e49bb0a | Philipp Rudo | 30 August 2017, 12:03:38 UTC | s390/kexec_file: Add image loader Add an image loader for kexec_file_load. For simplicity first skip crash support. The functions defined in machine_kexec_file will later be shared with the ELF loader. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:22 UTC |
| 7140688 | Philipp Rudo | 19 June 2017, 08:45:33 UTC | s390/kexec_file: Add kexec_file_load system call This patch adds the kexec_file_load system call to s390 as well as the arch specific functions common code requires to work. Loaders for the different file types will be added later. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:22 UTC |
| 840798a | Philipp Rudo | 28 August 2017, 13:32:36 UTC | s390/kexec_file: Add purgatory The common code expects the architecture to have a purgatory that runs between the two kernels. Add it now. For simplicity first skip crash support. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:22 UTC |
| 15ceb8c | Philipp Rudo | 27 June 2017, 10:44:11 UTC | s390/kexec_file: Prepare setup.h for kexec_file_load kexec_file_load needs to prepare the new kernels before they are loaded. For that it has to know the offsets in head.S, e.g. to register the new command line. Unfortunately there are no macros right now defining those offsets. Define them now. Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:21 UTC |
| 760dd0e | Martin Schwidefsky | 03 April 2018, 09:08:52 UTC | s390/smsgiucv: disable SMSG on module unload The module exit function of the smsgiucv module uses the incorrect CP command to disable SMSG messages. The correct command is "SET SMSG OFF". Use it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:17 UTC |
| dccccd3 | Vasily Gorbik | 13 April 2018, 16:22:14 UTC | s390/sclp: avoid potential usage of uninitialized value sclp_early_printk could be used before .bss section is zeroed (i.e. from als.c during the decompressor phase), therefore values used by sclp_early_printk should be located in the .data section. Another reason for that is to avoid potential initrd corruption, if some code in future would use sclp_early_printk before initrd is moved from possibly overlapping with .bss section region to a safe location. Fixes: 0b0d1173d8ae ("s390/sclp: 32 bit event mask compatibility mode") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 16 April 2018, 07:10:17 UTC |
| 60cc43f | Linus Torvalds | 16 April 2018, 01:24:20 UTC | Linux 4.17-rc1 | 16 April 2018, 01:24:20 UTC |
| e37563b | Linus Torvalds | 16 April 2018, 01:08:35 UTC | Merge tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs updates from David Sterba: "We have queued a few more fixes (error handling, log replay, softlockup) and the rest is SPDX updates that touche almost all files so the diffstat is long" * tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Only check first key for committed tree blocks btrfs: add SPDX header to Kconfig btrfs: replace GPL boilerplate by SPDX -- sources btrfs: replace GPL boilerplate by SPDX -- headers Btrfs: fix loss of prealloc extents past i_size after fsync log replay Btrfs: clean up resources during umount after trans is aborted btrfs: Fix possible softlock on single core machines Btrfs: bail out on error during replay_dir_deletes Btrfs: fix NULL pointer dereference in log_dir_items | 16 April 2018, 01:08:35 UTC |
| 09c9b0e | Linus Torvalds | 16 April 2018, 01:06:22 UTC | Merge tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "SMB3 fixes, a few for stable, and some important cleanup work from Ronnie of the smb3 transport code" * tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: change validate_buf to validate_iov cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data() cifs: Change SMB2_open to return an iov for the error parameter cifs: add resp_buf_size to the mid_q_entry structure smb3.11: replace a 4 with server->vals->header_preamble_size cifs: replace a 4 with server->vals->header_preamble_size cifs: add pdu_size to the TCP_Server_Info structure SMB311: Improve checking of negotiate security contexts SMB3: Fix length checking of SMB3.11 negotiate request CIFS: add ONCE flag for cifs_dbg type cifs: Use ULL suffix for 64-bit constant SMB3: Log at least once if tree connect fails during reconnect cifs: smb2pdu: Fix potential NULL pointer dereference | 16 April 2018, 01:06:22 UTC |
| f0d98d8 | Linus Torvalds | 16 April 2018, 00:24:12 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes. The status handling code is actually a running regression from the previous merge window which had an incomplete fix (now reverted) and most of the remaining bug fixes are for problems older than the current merge window" [ Side note: this merge also takes the base kernel git repository to 6+ million objects for the first time. Technically we hit it a couple of merges ago already if you count all the tag objects, but now it reaches 6M+ objects reachable from HEAD. I was joking around that that's when I should switch to 5.0, because 3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But probably not, even if numerology is about as good a reason as any. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status() Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()" scsi: aacraid: Insure command thread is not recursively stopped scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION scsi: qla2xxx: correctly shift host byte scsi: qla2xxx: Fix race condition between iocb timeout and initialisation scsi: qla2xxx: Avoid double completion of abort command scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure scsi: scsi_dh: Don't look for NULL devices handlers by name scsi: core: remove redundant assignment to shost->use_blk_mq | 16 April 2018, 00:24:12 UTC |
| ca71b3b | Linus Torvalds | 16 April 2018, 00:21:30 UTC | Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables | 16 April 2018, 00:21:30 UTC |
| 9fb71c2 | Linus Torvalds | 15 April 2018, 23:12:35 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier | 15 April 2018, 23:12:35 UTC |
| 6b0a02e | Linus Torvalds | 15 April 2018, 20:35:29 UTC | Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Another series of PTI related changes: - Remove the manual stack switch for user entries from the idtentry code. This debloats entry by 5k+ bytes of text. - Use the proper types for the asm/bootparam.h defines to prevent user space compile errors. - Use PAGE_GLOBAL for !PCID systems to gain back performance - Prevent setting of huge PUD/PMD entries when the entries are not leaf entries otherwise the entries to which the PUD/PMD points to and are populated get lost" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pgtable: Don't set huge PUD/PMD on non-leaf entries x86/pti: Leave kernel text global for !PCID x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image x86/pti: Enable global pages for shared areas x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init x86/mm: Comment _PAGE_GLOBAL mystery x86/mm: Remove extra filtering in pageattr code x86/mm: Do not auto-massage page protections x86/espfix: Document use of _PAGE_GLOBAL x86/mm: Introduce "default" kernel PTE mask x86/mm: Undo double _PAGE_PSE clearing x86/mm: Factor out pageattr _PAGE_GLOBAL setting x86/entry/64: Drop idtentry's manual stack switch for user entries x86/uapi: Fix asm/bootparam.h userspace compilation errors | 15 April 2018, 20:35:29 UTC |
| 71b8ebb | Linus Torvalds | 15 April 2018, 19:43:30 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A few scheduler fixes: - Prevent a bogus warning vs. runqueue clock update flags in do_sched_rt_period_timer() - Simplify the helper functions which handle requests for skipping the runqueue clock updat. - Do not unlock the tunables mutex in the error path of the cpu frequency scheduler utils. Its not held. - Enforce proper alignement for 'struct util_est' in sched_avg to prevent a misalignment fault on IA64" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Force proper alignment of 'struct util_est' sched/core: Simplify helpers for rq clock update skip requests sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning sched/cpufreq/schedutil: Fix error path mutex unlock | 15 April 2018, 19:43:30 UTC |
| 174e719 | Linus Torvalds | 15 April 2018, 19:36:31 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "A rather large set of perf updates: Kernel: - Fix various initialization issues - Prevent creating [ku]probes for not CAP_SYS_ADMIN users Tooling: - Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo) e.g: See what 'openat' syscalls are failing: # perf trace --failure -e openat 762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? > 790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory ^C# - Show information about the event (freq, nr_samples, total period/nr_events) in the annotate --tui and --stdio2 'perf annotate' output, similar to the first line in the 'perf report --tui', but just for the samples for a the annotated symbol (Arnaldo Carvalho de Melo) - Introduce 'perf version --build-options' to show what features were linked, aliased as well as a shorter 'perf -vv' (Jin Yao) - Add a "dso_size" sort order (Kim Phillips) - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du) - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo) - Show group details on the title line in the annotate browser and 'perf annotate --stdio2' output, so that the per-event columns can have headers (Arnaldo Carvalho de Melo) - Fixup vertical line separating metrics from instructions and cleaning unused lines at the bottom, both in the annotate TUI browser (Arnaldo Carvalho de Melo) - Remove duplicated 'samples' in lost samples warning in 'perf report' (Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing the perf build process, automagically adding support for the new DRM_I915_QUERY ioctl (Arnaldo Carvalho de Melo) - Make auxtrace_queues__add_buffer() allocate struct buffer, from a patchkit already applied (Adrian Hunter) - Fix the --stdio2/TUI annotate output to include group details, be it for a recorded '{a,b,f}' explicit event group or when forcing group display using 'perf report --group' for a set of events not recorded as a group (Arnaldo Carvalho de Melo) - Fix display artifacts in the ui browser (base class for the annotate and main report/top TUI browser) related to the extra title lines work (Arnaldo Carvalho de Melo) - perf auxtrace refactorings, leftovers from a previously partially processed patchset (Adrian Hunter) - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing a perf build warning and in the process automagically adding support for a new ioctl command (Arnaldo Carvalho de Melo) - Fix a strncpy issue in uprobe tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open() tracing/uprobe_event: Fix strncpy corner case perf/core: Fix perf_uprobe_init() perf/core: Fix perf_kprobe_init() perf/core: Fix use-after-free in uprobe_perf_close() perf tests clang: Fix function name for clang IR test perf clang: Add support for recent clang versions perf tools: Fix perf builds with clang support perf tools: No need to include namespaces.h in util.h perf hists browser: Remove leftover from row returned from refresh perf hists browser: Show extra_title_lines in the 'D' debug hotkey perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering tools headers uapi: Synchronize i915_drm.h perf report: Remove duplicated 'samples' in lost samples warning perf ui browser: Fixup cleaning unused lines at the bottom perf annotate browser: Fixup vertical line separating metrics from instructions perf annotate: Show group details on the title line perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer perf/x86/intel: Move regs->flags EXACT bit init perf trace: Remove redundant ')' ... | 15 April 2018, 19:36:31 UTC |
| 19ca90d | Linus Torvalds | 15 April 2018, 19:32:06 UTC | Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI bootup fixlet from Thomas Gleixner: "A single fix for an early boot warning caused by invoking this_cpu_has() before SMP initialization" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush() | 15 April 2018, 19:32:06 UTC |
| 68d54d3 | Linus Torvalds | 15 April 2018, 19:29:46 UTC | Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq affinity fixes from Thomas Gleixner: - Fix error path handling in the affinity spreading code - Make affinity spreading smarter to avoid issues on systems which claim to have hotpluggable CPUs while in fact they can't hotplug anything. So instead of trying to spread the vectors (and thereby the associated device queues) to all possibe CPUs, spread them on all present CPUs first. If there are left over vectors after that first step they are spread among the possible, but not present CPUs which keeps the code backwards compatible for virtual decives and NVME which allocate a queue per possible CPU, but makes the spreading smarter for devices which have less queues than possible or present CPUs. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Spread irq vectors among present CPUs as far as possible genirq/affinity: Allow irq spreading from a given starting point genirq/affinity: Move actual irq vector spreading into a helper function genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask genirq/affinity: Don't return with empty affinity masks on error | 15 April 2018, 19:29:46 UTC |
| 9dceab8 | Linus Torvalds | 15 April 2018, 19:27:58 UTC | Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC fixlet from Stafford Horne: "Just one small thing here, it came in a while back but I didnt have anything in my 4.16 queue, still its the only thing for 4.17 so sending it alone. Small cleanup: remove unused __ARCH_HAVE_MMU define" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: remove unused __ARCH_HAVE_MMU define | 15 April 2018, 19:27:58 UTC |
| b1cb4f9 | Linus Torvalds | 15 April 2018, 18:57:12 UTC | Merge tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when loading modules built with a different CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic. - Fix busy loops in the OPAL NVRAM driver if we get certain error conditions from firmware. - Remove tlbie trace points from KVM code that's called in real mode, because it causes crashes. - Fix checkstops caused by invalid tlbiel on Power9 Radix. - Ensure the set of CPU features we "know" are always enabled is actually the minimal set when we build with support for firmware supplied CPU features. Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin. * tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features powerpc/mm/radix: Fix checkstops caused by invalid tlbiel KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode powerpc/8xx: Fix build with hugetlbfs enabled powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops powerpc/fscr: Enable interrupts earlier before calling get_user() powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic | 15 April 2018, 18:57:12 UTC |
| 18b7fd1 | Linus Torvalds | 14 April 2018, 15:50:50 UTC | Merge branch 'akpm' (patches from Andrew) Merge yet more updates from Andrew Morton: - various hotfixes - kexec_file updates and feature work * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) kernel/kexec_file.c: move purgatories sha256 to common code kernel/kexec_file.c: allow archs to set purgatory load address kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: split up __kexec_load_puragory kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* kernel/kexec_file.c: search symbols in read-only kexec_purgatory kernel/kexec_file.c: make purgatory_info->ehdr const kernel/kexec_file.c: remove checks in kexec_purgatory_load include/linux/kexec.h: silence compile warnings kexec_file, x86: move re-factored code to generic side x86: kexec_file: clean up prepare_elf64_headers() x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() x86: kexec_file: purge system-ram walking from prepare_elf64_headers() kexec_file,x86,powerpc: factor out kexec_file_ops functions kexec_file: make use of purgatory optional proc: revalidate misc dentries mm, slab: reschedule cache_reap() on the same CPU ... | 14 April 2018, 15:50:50 UTC |
| c7cd882 | Helge Deller | 13 April 2018, 19:54:37 UTC | parisc: Fix missing binfmt_elf32.o build error Commit 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") removed the binfmt_elf32.c source file, but missed to drop the object file from the list of object files the Makefile, which then results in a build error. Fixes: 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> | 14 April 2018, 09:17:59 UTC |
| df6f280 | Philipp Rudo | 13 April 2018, 22:36:46 UTC | kernel/kexec_file.c: move purgatories sha256 to common code The code to verify the new kernels sha digest is applicable for all architectures. Move it to common code. One problem is the string.c implementation on x86. Currently sha256 includes x86/boot/string.h which defines memcpy and memset to be gcc builtins. By moving the sha256 implementation to common code and changing the include to linux/string.h both functions are no longer defined. Thus definitions have to be provided in x86/purgatory/string.c Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 3be3f61 | Philipp Rudo | 13 April 2018, 22:36:43 UTC | kernel/kexec_file.c: allow archs to set purgatory load address For s390 new kernels are loaded to fixed addresses in memory before they are booted. With the current code this is a problem as it assumes the kernel will be loaded to an 'arbitrary' address. In particular, kexec_locate_mem_hole searches for a large enough memory region and sets the load address (kexec_bufer->mem) to it. Luckily there is a simple workaround for this problem. By returning 1 in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This allows the architecture to set kbuf->mem by hand. While the trick works fine for the kernel it does not for the purgatory as here the architectures don't have access to its kexec_buffer. Give architectures access to the purgatories kexec_buffer by changing kexec_load_purgatory to take a pointer to it. With this change architectures have access to the buffer and can edit it as they need. A nice side effect of this change is that we can get rid of the purgatory_info->purgatory_load_address field. As now the information stored there can directly be accessed from kbuf->mem. Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 8da0b72 | Philipp Rudo | 13 April 2018, 22:36:39 UTC | kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 620f697 | Philipp Rudo | 13 April 2018, 22:36:35 UTC | kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs The main loop currently uses quite a lot of variables to update the section headers. Some of them are unnecessary. So clean them up a little. Link: http://lkml.kernel.org/r/20180321112751.22196-9-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| f1b1cca | Philipp Rudo | 13 April 2018, 22:36:32 UTC | kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs To update the entry point there is an extra loop over all section headers although this can be done in the main loop. So move it there and eliminate the extra loop and variable to store the 'entry section index'. Also, in the main loop, move the usual case, i.e. non-bss section, out of the extra if-block. Link: http://lkml.kernel.org/r/20180321112751.22196-8-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 9304570 | Philipp Rudo | 13 April 2018, 22:36:28 UTC | kernel/kexec_file.c: split up __kexec_load_puragory When inspecting __kexec_load_purgatory you find that it has two tasks 1) setting up the kexec_buffer for the new kernel and, 2) setting up pi->sechdrs for the final load address. The two tasks are independent of each other. To improve readability split up __kexec_load_purgatory into two functions, one for each task, and call them directly from kexec_load_purgatory. Link: http://lkml.kernel.org/r/20180321112751.22196-7-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 8aec395 | Philipp Rudo | 13 April 2018, 22:36:24 UTC | kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* When the relocations are applied to the purgatory only the section the relocations are applied to is writable. The other sections, i.e. the symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. While at it also change the signatures of arch_kexec_apply_relocations* to take section pointers instead of just the index of the relocation section. This removes the second lookup and sanity check of the sections in arch code. Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 961d921 | Philipp Rudo | 13 April 2018, 22:36:21 UTC | kernel/kexec_file.c: search symbols in read-only kexec_purgatory The stripped purgatory does not contain a symtab. So when looking for symbols this is done in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. Link: http://lkml.kernel.org/r/20180321112751.22196-5-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| 65c225d | Philipp Rudo | 13 April 2018, 22:36:17 UTC | kernel/kexec_file.c: make purgatory_info->ehdr const The kexec_purgatory buffer is read-only. Thus all pointers into kexec_purgatory are read-only, too. Point this out by explicitly marking purgatory_info->ehdr as 'const' and update the comments in purgatory_info. Link: http://lkml.kernel.org/r/20180321112751.22196-4-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| d2b8178 | Philipp Rudo | 13 April 2018, 22:36:13 UTC | kernel/kexec_file.c: remove checks in kexec_purgatory_load Before the purgatory is loaded several checks are done whether the ELF file in kexec_purgatory is valid or not. These checks are incomplete. For example they don't check for the total size of the sections defined in the section header table or if the entry point actually points into the purgatory. On the other hand the purgatory, although an ELF file on its own, is part of the kernel. Thus not trusting the purgatory means not trusting the kernel build itself. So remove all validity checks on the purgatory and just trust the kernel build. Link: http://lkml.kernel.org/r/20180321112751.22196-3-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:28 UTC |
| ee6ebed | Philipp Rudo | 13 April 2018, 22:36:10 UTC | include/linux/kexec.h: silence compile warnings Patch series "kexec_file: Clean up purgatory load", v2. Following the discussion with Dave and AKASHI, here are the common code patches extracted from my recent patch set (Add kexec_file_load support to s390) [1]. The patches were extracted to allow upstream integration together with AKASHI's common code patches before the arch code gets adjusted to the new base. The reason for this series is to prepare common code for adding kexec_file_load to s390 as well as cleaning up the mis-use of the sh_offset field during purgatory load. In detail this series contains: Patch #1&2: Minor cleanups/fixes. Patch #3-9: Clean up the purgatory load/relocation code. Especially remove the mis-use of the purgatory_info->sechdrs->sh_offset field, currently holding a pointer into either kexec_purgatory (ro) or purgatory_buf (rw) depending on the section. With these patches the section address will be calculated verbosely and sh_offset will contain the offset of the section in the stripped purgatory binary (purgatory_buf). Patch #10: Allows architectures to set the purgatory load address. This patch is important for s390 as the kernel and purgatory have to be loaded to fixed addresses. In current code this is impossible as the purgatory load is opaque to the architecture. Patch #11: Moves x86 purgatories sha implementation to common lib/ directory to allow reuse in other architectures. This patch (of 11) When building the kernel with CONFIG_KEXEC_FILE enabled gcc prints a compile warning multiple times. In file included from <path>/linux/init/initramfs.c:526:0: <path>/include/linux/kexec.h:120:9: warning: `struct kimage' declared inside parameter list [enabled by default] unsigned long cmdline_len); ^ This is because the typedefs for kexec_file_load uses struct kimage before it is declared. Fix this by simply forward declaring struct kimage. Link: http://lkml.kernel.org/r/20180321112751.22196-2-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| babac4a | AKASHI Takahiro | 13 April 2018, 22:36:06 UTC | kexec_file, x86: move re-factored code to generic side In the previous patches, commonly-used routines, exclude_mem_range() and prepare_elf64_headers(), were carved out. Now place them in kexec common code. A prefix "crash_" is given to each of their names to avoid possible name collisions. Link: http://lkml.kernel.org/r/20180306102303.9063-8-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| eb7dae9 | AKASHI Takahiro | 13 April 2018, 22:36:03 UTC | x86: kexec_file: clean up prepare_elf64_headers() Removing bufp variable in prepare_elf64_headers() makes the code simpler and more understandable. Link: http://lkml.kernel.org/r/20180306102303.9063-7-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| 8d5f894 | AKASHI Takahiro | 13 April 2018, 22:35:59 UTC | x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer While CRASH_MAX_RANGES (== 16) seems to be good enough, fixed-number array is not a good idea in general. In this patch, size of crash_mem buffer is calculated as before and the buffer is now dynamically allocated. This change also allows removing crash_elf_data structure. Link: http://lkml.kernel.org/r/20180306102303.9063-6-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| c72c7e6 | AKASHI Takahiro | 13 April 2018, 22:35:56 UTC | x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() The code guarded by CONFIG_X86_64 is necessary on some architectures which have a dedicated kernel mapping outside of linear memory mapping. (arm64 is among those.) In this patch, an additional argument, kernel_map, is added to enable/ disable the code removing #ifdef. Link: http://lkml.kernel.org/r/20180306102303.9063-5-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| cbe6601 | AKASHI Takahiro | 13 April 2018, 22:35:53 UTC | x86: kexec_file: purge system-ram walking from prepare_elf64_headers() While prepare_elf64_headers() in x86 looks pretty generic for other architectures' use, it contains some code which tries to list crash memory regions by walking through system resources, which is not always architecture agnostic. To make this function more generic, the related code should be purged. In this patch, prepare_elf64_headers() simply scans crash_mem buffer passed and add all the listed regions to elf header as a PT_LOAD segment. So walk_system_ram_res(prepare_elf64_headers_callback) have been moved forward before prepare_elf64_headers() where the callback, prepare_elf64_headers_callback(), is now responsible for filling up crash_mem buffer. Meanwhile exclude_elf_header_ranges() used to be called every time in this callback it is rather redundant and now called only once in prepare_elf_headers() as well. Link: http://lkml.kernel.org/r/20180306102303.9063-4-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| 9ec4ece | AKASHI Takahiro | 13 April 2018, 22:35:49 UTC | kexec_file,x86,powerpc: factor out kexec_file_ops functions As arch_kexec_kernel_image_{probe,load}(), arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig() are almost duplicated among architectures, they can be commonalized with an architecture-defined kexec_file_ops array. So let's factor them out. Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| b799a09 | AKASHI Takahiro | 13 April 2018, 22:35:45 UTC | kexec_file: make use of purgatory optional Patch series "kexec_file, x86, powerpc: refactoring for other architecutres", v2. This is a preparatory patchset for adding kexec_file support on arm64. It was originally included in a arm64 patch set[1], but Philipp is also working on their kexec_file support on s390[2] and some changes are now conflicting. So these common parts were extracted and put into a separate patch set for better integration. What's more, my original patch#4 was split into a few small chunks for easier review after Dave's comment. As such, the resulting code is basically identical with my original, and the only *visible* differences are: - renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup() - change one of types of arguments at prepare_elf64_headers() Those, unfortunately, require a couple of trivial changes on the rest (#1, #6 to #13) of my arm64 kexec_file patch set[1]. Patch #1 allows making a use of purgatory optional, particularly useful for arm64. Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load, verify_sig}() and arch_kimage_file_post_load_cleanup() across architectures. Patches #3-#7 are also intended to generalize parse_elf64_headers(), along with exclude_mem_range(), to be made best re-use of. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html [2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html This patch (of 7): On arm64, crash dump kernel's usable memory is protected by *unmapping* it from kernel virtual space unlike other architectures where the region is just made read-only. It is highly unlikely that the region is accidentally corrupted and this observation rationalizes that digest check code can also be dropped from purgatory. The resulting code is so simple as it doesn't require a bit ugly re-linking/relocation stuff, i.e. arch_kexec_apply_relocations_add(). Please see: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html All that the purgatory does is to shuffle arguments and jump into a new kernel, while we still need to have some space for a hash value (purgatory_sha256_digest) which is never checked against. As such, it doesn't make sense to have trampline code between old kernel and new kernel on arm64. This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and allows related code to be compiled in only if necessary. [takahiro.akashi@linaro.org: fix trivial screwup] Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| 1da4d37 | Alexey Dobriyan | 13 April 2018, 22:35:42 UTC | proc: revalidate misc dentries If module removes proc directory while another process pins it by chdir'ing to it, then subsequent recreation of proc entry and all entries down the tree will not be visible to any process until pinning process unchdir from directory and unpins everything. Steps to reproduce: proc_mkdir("aaa", NULL); proc_create("aaa/bbb", ...); chdir("/proc/aaa"); remove_proc_entry("aaa/bbb", NULL); remove_proc_entry("aaa", NULL); proc_mkdir("aaa", NULL); # inaccessible because "aaa" dentry still points # to the original "aaa". proc_create("aaa/bbb", ...); Fix is to implement ->d_revalidate and ->d_delete. Link: http://lkml.kernel.org/r/20180312201938.GA4871@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
| a9f2a84 | Vlastimil Babka | 13 April 2018, 22:35:38 UTC | mm, slab: reschedule cache_reap() on the same CPU cache_reap() is initially scheduled in start_cpu_timer() via schedule_delayed_work_on(). But then the next iterations are scheduled via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND. Thus since commit ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") there is no guarantee the future iterations will run on the originally intended cpu, although it's still preferred. I was able to demonstrate this with /sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also happen due to migrating timers in nohz context. As a result, some cpu's would be calling cache_reap() more frequently and others never. This patch uses schedule_delayed_work_on() with the current cpu when scheduling the next iteration. Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz Fixes: ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Pekka Enberg <penberg@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 April 2018, 00:10:27 UTC |
