4504ab0 | Vakul Garg | 12 March 2019, 08:22:57 UTC | net/tls: Inform user space about send buffer availability A previous fix ("tls: Fix write space handling") assumed that user space application gets informed about the socket send buffer availability when tls_push_sg() gets called. Inside tls_push_sg(), in case do_tcp_sendpages() returns 0, the function returns without calling ctx->sk_write_space. Further, the new function tls_sw_write_space() did not invoke ctx->sk_write_space. This leads to situation that user space application encounters a lockup always waiting for socket send buffer to become available. Rather than call ctx->sk_write_space from tls_push_sg(), it should be called from tls_write_space. So whenever tcp stack invokes sk->sk_write_space after freeing socket send buffer, we always declare the same to user space by the way of invoking ctx->sk_write_space. Fixes: 7463d3a2db0ef ("tls: Fix write space handling") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 21:16:44 UTC |
5b5f99b | Zhike Wang | 11 March 2019, 10:15:54 UTC | net_sched: return correct value for *notify* functions It is confusing to directly use return value of netlink_send()/ netlink_unicast() as the return value of *notify*, as it may be not error at all. Example: in tc_del_tfilter(), after calling tfilter_del_notify(), it will goto errout if (err). However, the netlink_send()/netlink_unicast() will return positive value even for successful case. So it may not call tcf_chain_tp_remove() and so on to clean up the resource, as a result, resource is leaked. It may be easier to only check the return value of tfilter_del_nofiy(), but it is more clean to correct all related functions. Co-developed-by: Zengmo Gao <gaozengmo@jd.com> Signed-off-by: Zhike Wang <wangzhike@jd.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 20:48:27 UTC |
deb6bfa | Bryan Whitehead | 13 March 2019, 19:55:48 UTC | lan743x: Fix TX Stall Issue It has been observed that tx queue may stall while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where the tx interrupt vector was disabled automatically, but was not re enabled later. The lan743x has two mechanisms to enable/disable individual interrupts. Interrupts can be enabled/disabled by individual source, and they can also be enabled/disabled by individual vector which has been mapped to the source. Both must be enabled for interrupts to work properly. The TX code path, primarily uses the interrupt enable/disable of the TX source bit, while leaving the vector enabled all the time. However, while investigating this issue it was noticed that the driver requested the use of the vector auto clear feature. The test above revealed a case where the vector enable was cleared unintentionally. This patch fixes the issue by deleting the lines that request the vector auto clear feature to be used. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 March 2019, 20:41:46 UTC |
4d09d8d | David S. Miller | 12 March 2019, 22:00:15 UTC | Merge branch 'mlx4-fixes' Tariq Toukan says: ==================== mlx4_core misc fixes This patchset by Jack contains misc fixes to the mlx4 Core driver. Patch 1 fixes a use-after-free situation by marking (nullifying) the pointer, please queue for -stable >= v4.0. Patch 2 adds a missing lock acquire and release in SRIOV command interface, please queue for -stable >= v4.9. Patch 3 avoids calling roundup_pow_of_two when argument is zero, please queue for -stable >= v3.3. Series generated against net commit: a3b1933d34d5 Merge tag 'mlx5-fixes-2019-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 22:00:15 UTC |
8511a65 | Jack Morgenstein | 12 March 2019, 15:05:49 UTC | net/mlx4_core: Fix qp mtt size calculation Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 22:00:15 UTC |
c07d279 | Jack Morgenstein | 12 March 2019, 15:05:48 UTC | net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to guarantee that there are no FW commands in progress on the comm channel (for VFs) or wrapped FW commands (on the PF) when SRIOV is active. We do this by also taking the slave_cmd_mutex when SRIOV is active. This is especially important when switching from event to polling, since we free the command-context array during the switch. If there are FW commands in progress (e.g., waiting for a completion event), the completion event handler will access freed memory. Since the decision to use comm_wait or comm_poll is taken before grabbing the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the slave_cmd_mutex as well (to guarantee that the decision to use events or polling and the call to the appropriate cmd function are atomic). Fixes: a7e1f04905e5 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 22:00:15 UTC |
e15ce4b | Jack Morgenstein | 12 March 2019, 15:05:47 UTC | net/mlx4_core: Fix reset flow when in command polling mode As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa3506 ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 22:00:15 UTC |
c7fce56 | David S. Miller | 12 March 2019, 21:55:16 UTC | Merge branch 'mlxsw-Various-fixes' Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 fixes the recently introduced QSFP thermal zones to correctly work with split ports, where several ports are mapped to the same module. Patch #2 initializes the base MAC in the minimal driver. The driver is using the base MAC as its parent ID and without initializing it, it is reported as all zeroes to user space. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:55:16 UTC |
426aa1f | Jiri Pirko | 12 March 2019, 08:40:42 UTC | mlxsw: minimal: Initialize base_mac Currently base_mac is not initialized which causes wrong reporting of zeroed parent_id to userspace. Fix this by initializing base_mac properly. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:55:16 UTC |
6bab45b | Vadim Pasternak | 12 March 2019, 08:40:41 UTC | mlxsw: core: Prevent duplication during QSFP module initialization Verify during thermal initialization if QSFP module's entry is already configured in order to prevent duplication. Such scenario could happen in case two switch drivers (PCI and I2C based) coexist and if after boot, splitting configuration is applied for some ports and then I2C based driver is re-probed. In such case after reboot same QSFP module, associated with split will be discovered by I2C based driver few times, and it will cause a crash. It could happen for example on system equipped with BMC (Baseboard Management Controller), running I2C based driver, when the next steps are performed: - System boot - Host side configures port spilt. - BMC side is rebooted. Fixes: 6a79507cfe94 ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:55:16 UTC |
4ec850e | Kangjie Lu | 12 March 2019, 07:50:40 UTC | net: dwmac-sun8i: fix a missing check of of_get_phy_mode of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns -EINVAL of it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:52:00 UTC |
035a14e | Kangjie Lu | 12 March 2019, 07:43:18 UTC | net: sh_eth: fix a missing check of of_get_phy_mode of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails. Fixes: b356e978e92f ("sh_eth: add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:51:02 UTC |
c7cbc3e | Kangjie Lu | 12 March 2019, 07:24:07 UTC | net: 8390: fix potential NULL pointer dereferences In case ioremap fails, the fix releases resources and returns to avoid NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:49:49 UTC |
9f4d635 | Kangjie Lu | 12 March 2019, 07:16:21 UTC | net: fujitsu: fix a potential NULL pointer dereference In case ioremap fails, the fix releases the pcmcia window and returns -ENOMEM to avoid the NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:48:35 UTC |
eb32cfc | Kangjie Lu | 12 March 2019, 07:06:47 UTC | net: qlogic: fix a potential NULL pointer dereference In case create_singlethread_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:44:43 UTC |
1001049 | Kangjie Lu | 12 March 2019, 05:54:55 UTC | isdn: hfcpci: fix potential NULL pointer dereference In case ioremap fails, the fix releases resources and returns. The following printk is for logging purpose and thus is preserved. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2019, 21:36:02 UTC |
a3b1933 | David S. Miller | 11 March 2019, 23:22:49 UTC | Merge tag 'mlx5-fixes-2019-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-03-11 For -stable v5.0: ('net/mlx5e: Fix access to non-existing receive queue') ('net/mlx5e: Properly get the PF number phys port name ndo') ('net/mlx5: Fix multiple updates of steering rules in parallel') ('net/mlx5: Avoid panic when setting vport mac, getting vport config') ('net/mlx5: Avoid panic when setting vport rate') ('net/mlx5e: IPoIB, Fix RX checksum statistics update') ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 23:22:49 UTC |
c6873d1 | xiaofeis | 11 March 2019, 06:11:40 UTC | Documentation: devicetree: add a new optional property for port mac address Add documentation for a new optional property local-mac-address which is described in ethernet.txt. Signed-off-by: xiaofeis <xiaofeis@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 23:21:09 UTC |
5c14931 | Kangjie Lu | 11 March 2019, 07:06:06 UTC | net: rocker: fix a potential NULL pointer dereference In case kzalloc fails, the fix releases resources and returns NOTIFY_BAD to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 23:17:31 UTC |
4280b73 | Kangjie Lu | 11 March 2019, 06:53:15 UTC | net: qlge: fix a potential NULL pointer dereference In case alloc_ordered_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 23:16:22 UTC |
ab0891f | David S. Miller | 11 March 2019, 23:14:14 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Fix list corruption in device notifier in the masquerade infrastructure, from Florian Westphal. 2) Fix double-free of sets and use-after-free when deleting elements. 3) Don't bogusly return EBUSY when removing a set after flush command. 4) Use-after-free in dynamically allocate operations. 5) Don't report a new ruleset generation to userspace if transaction list is empty, this invalidates the userspace cache innecessarily. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 23:14:14 UTC |
ee74d0b | Eric Dumazet | 11 March 2019, 20:48:44 UTC | net/x25: reset state in x25_connect() In case x25_connect() fails and frees the socket neighbour, we also need to undo the change done to x25->state. Before my last bug fix, we had use-after-free so this patch fixes a latent bug. syzbot report : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173 Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f RSP: 0018:ffff888076717a08 EFLAGS: 00010207 RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000 kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840 kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5' R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013 FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_release+0xd0/0x340 net/x25/af_x25.c:658 __sock_release+0xd3/0x2b0 net/socket.c:579 sock_close+0x1b/0x30 net/socket.c:1162 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 get_signal+0x1961/0x1d50 kernel/signal.c:2388 do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816 exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4 R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff Modules linked in: Fixes: 95d6ebd53c79 ("net/x25: fix use-after-free in x25_device_event()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 22:40:14 UTC |
f2feaef | Christoph Paasch | 11 March 2019, 18:41:05 UTC | tcp: Don't access TCP_SKB_CB before initializing it Since commit eeea10b83a13 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), tcp_vX_fill_cb is only called after tcp_filter(). That means, TCP_SKB_CB(skb)->end_seq still points to the IP-part of the cb. We thus should not mock with it, as this can trigger bugs (thanks syzkaller): [ 12.349396] ================================================================== [ 12.350188] BUG: KASAN: slab-out-of-bounds in ip6_datagram_recv_specific_ctl+0x19b3/0x1a20 [ 12.351035] Read of size 1 at addr ffff88006adbc208 by task test_ip6_datagr/1799 Setting end_seq is actually no more necessary in tcp_filter as it gets initialized later on in tcp_vX_fill_cb. Cc: Eric Dumazet <edumazet@google.com> Fixes: eeea10b83a13 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 22:36:49 UTC |
0b31d98 | Kangjie Lu | 11 March 2019, 06:05:41 UTC | net: thunder: fix a potential NULL pointer dereference In case alloc_ordered_workqueue fails, the fix reports the error and returns -ENOMEM. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 20:34:31 UTC |
41af8b3 | Kangjie Lu | 11 March 2019, 06:01:41 UTC | net: lio_core: fix two NULL pointer dereferences In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 19:29:17 UTC |
dd9d9f5 | Bryan Whitehead | 11 March 2019, 17:39:39 UTC | lan743x: Fix RX Kernel Panic It has been noticed that running the speed test at www.speedtest.net occasionally causes a kernel panic. Investigation revealed that under this test RX buffer allocation sometimes fails and returns NULL. But the lan743x driver did not handle this case. This patch fixes this issue by attempting to allocate a buffer before sending the new rx packet to the OS. If the allocation fails then the new rx packet is dropped and the existing buffer is reused in the DMA ring. Updates for v2: Additional 2 locations where allocation was not checked, has been changed to reuse existing buffer. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 19:20:20 UTC |
b8b2749 | Florian Westphal | 07 March 2019, 22:20:11 UTC | netfilter: nf_tables: return immediately on empty commit When running 'nft flush ruleset' while no rules exist, we will increment the generation counter and announce a new genid to userspace, yet nothing had changed in the first place. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 11 March 2019, 19:01:20 UTC |
fe543b2 | Kangjie Lu | 11 March 2019, 05:02:32 UTC | net: liquidio: fix a NULL pointer dereference In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 18:43:39 UTC |
2431925 | Tonghao Zhang | 04 March 2019, 08:27:16 UTC | net/mlx5: Avoid panic when setting vport rate If we try to set VFs rate on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1 If not applied the first patch ("net/mlx5: Avoid panic when setting vport mac, getting vport config"), the command: $ ip link set $MLX_VF0 vf 0 rate 100 can also crash the kernel. [ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core] [ 1650.007092] do_setlink+0x982/0xd20 [ 1650.007129] __rtnl_newlink+0x528/0x7d0 [ 1650.007374] rtnl_newlink+0x43/0x60 [ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320 [ 1650.007484] netlink_rcv_skb+0xcb/0x100 [ 1650.007519] netlink_unicast+0x17f/0x230 [ 1650.007554] netlink_sendmsg+0x2d2/0x3d0 [ 1650.007592] sock_sendmsg+0x36/0x50 [ 1650.007625] ___sys_sendmsg+0x280/0x2a0 [ 1650.007963] __sys_sendmsg+0x58/0xa0 [ 1650.007998] do_syscall_64+0x5b/0x180 [ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Cc: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:40 UTC |
6e77c41 | Tonghao Zhang | 04 March 2019, 08:27:15 UTC | net/mlx5: Avoid panic when setting vport mac, getting vport config If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a054a718 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:40 UTC |
c475e11 | Tariq Toukan | 05 March 2019, 14:45:09 UTC | net/mlx5e: Fix access to non-existing receive queue In case number of channels is changed while interface is down, RSS indirection table is mistakenly not modified accordingly, causing access to out-of-range non-existing object. Fix by updating the RSS indireciton table also in the early return flow of interface down. Fixes: fb35c534b788 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow") Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:40 UTC |
3d6f3cd | Feras Daoud | 14 January 2019, 15:34:28 UTC | net/mlx5e: IPoIB, Fix RX checksum statistics update Update the RX checksum only if the feature is enabled. Fixes: 9d6bd752c63c ("net/mlx5e: IPoIB, RX handler") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:40 UTC |
6ffb630 | Roi Dayan | 26 February 2019, 15:02:42 UTC | net/mlx5: Remove redundant lag function to get pf num The function is not being used. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:39 UTC |
5b33eba | Roi Dayan | 26 February 2019, 14:18:19 UTC | net/mlx5e: Properly get the PF number phys port name ndo Currently, we fail to retrieve the PF number in some cases (e.g single ported cards, lag capability), this further results in a call trace issued by the rtnetlink code, since the error value is not -EOPNOTSUPP. Change the implementation to be independent from the lag code and function properly on both two ports and single ported cards. Call Trace: [ 194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num [ 194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G W O 5.0.0-rc7+ #3 [ 194.531307] Workqueue: events linkwatch_event [ 194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.545007] Call Trace: [ 194.545406] rtmsg_ifinfo_event.part.29+0x1b/0xb0 [ 194.545810] rtmsg_ifinfo+0x51/0x80 [ 194.546209] netdev_state_change+0xc7/0x110 [ 194.546608] ? dev_valid_name+0x1b0/0x1b0 [ 194.547010] ? __local_bh_enable_ip+0xef/0x1d0 [ 194.547411] ? lockdep_hardirqs_on+0x3ea/0x560 [ 194.547811] ? linkwatch_do_dev+0x9b/0x100 [ 194.548207] linkwatch_do_dev+0x9b/0x100 [ 194.548605] __linkwatch_run_queue+0x244/0x430 [ 194.549014] ? linkwatch_schedule_work+0x100/0x100 [ 194.549412] ? lock_acquire+0x10f/0x2d0 [ 194.549816] linkwatch_event+0x3f/0x50 [ 194.550212] process_one_work+0x7d3/0x1460 Fixes: c12ecc230564 ("net/mlx5e: Move to use common phys port names for vport representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:39 UTC |
718ce4d | Eli Britstein | 08 January 2019, 10:15:37 UTC | net/mlx5: Consolidate update FTE for all removal changes With commit a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") and a use-case of e-switch remote mirroring, the incremental/stepped FTE removal process done by the fs core got us to illegal transient states and FW errors: SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x9c2e40) To avoid that and improve FTE removal performance, aggregate the FTE's updates that should be applied. Remove the FTE if it is empty, or apply one FW update command with the aggregated updates. Fixes: a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:39 UTC |
476d61b | Eli Britstein | 31 January 2019, 12:38:32 UTC | net/mlx5: Add a locked flag to node removal functions Add a locked flag to the node removal functions to signal if the parent is already locked from the caller function or not as a pre-step towards outside lock. Currently always use false with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:39 UTC |
e7aafc8 | Eli Britstein | 08 January 2019, 07:29:22 UTC | net/mlx5: Add modify FTE helper function Add modify FTE helper function and use it when deleting a rule, as a pre-step towards consolidated FTE modification, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:39 UTC |
6237634 | Eli Britstein | 31 January 2019, 12:56:01 UTC | net/mlx5: Fix multiple updates of steering rules in parallel There might be a condition where the fte found is not active yet. In this case we should not use it, but continue to search for another, or allocate a new one. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | 11 March 2019, 18:32:38 UTC |
a623a7a | Arnd Bergmann | 11 March 2019, 15:38:17 UTC | y2038: fix socket.h header inclusion Referencing the __kernel_long_t type caused some user space applications to stop compiling when they had not already included linux/posix_types.h, e.g. s/multicast.c -o ext/sockets/multicast.lo In file included from /builddir/build/BUILD/php-7.3.3/main/php.h:468, from /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:27: /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c: In function 'zm_startup_sockets': /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:776:40: error: '__kernel_long_t' undeclared (first use in this function) 776 | REGISTER_LONG_CONSTANT("SO_SNDTIMEO", SO_SNDTIMEO, CONST_CS | CONST_PERSISTENT); It is safe to include that header here, since it only contains kernel internal types that do not conflict with other user space types. It's still possible that some related build failures remain, but those are likely to be for code that is not already y2038 safe. Reported-by: Laura Abbott <labbott@redhat.com> Fixes: a9beb86ae6e5 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 18:06:00 UTC |
a843dc4 | Miaohe Lin | 11 March 2019, 08:29:32 UTC | net: sit: fix UBSAN Undefined behaviour in check_6rd In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: linmiaohe <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2019, 17:32:45 UTC |
3f3a390 | Pablo Neira Ayuso | 11 March 2019, 12:04:16 UTC | netfilter: nf_tables: use-after-free in dynamic operations Smatch reports: net/netfilter/nf_tables_api.c:2167 nf_tables_expr_destroy() error: dereferencing freed memory 'expr->ops' net/netfilter/nf_tables_api.c 2162 static void nf_tables_expr_destroy(const struct nft_ctx *ctx, 2163 struct nft_expr *expr) 2164 { 2165 if (expr->ops->destroy) 2166 expr->ops->destroy(ctx, expr); ^^^^ --> 2167 module_put(expr->ops->type->owner); ^^^^^^^^^ 2168 } Smatch says there are three functions which free expr->ops. Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 11 March 2019, 12:19:49 UTC |
273fe3f | Pablo Neira Ayuso | 08 March 2019, 14:30:03 UTC | netfilter: nf_tables: bogus EBUSY when deleting set after flush Set deletion after flush coming in the same batch results in EBUSY. Add set use counter to track the number of references to this set from rules. We cannot rely on the list of bindings for this since such list is still populated from the preparation phase. Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 11 March 2019, 12:19:24 UTC |
2a5ff07 | Eric Dumazet | 10 March 2019, 17:39:37 UTC | gro_cells: make sure device is up in gro_cells_receive() We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc644e55 ("net: add gro_cells infrastructure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 18:07:14 UTC |
59cbf56 | Eric Dumazet | 10 March 2019, 17:36:40 UTC | vxlan: test dev->flags & IFF_UP before calling gro_cells_receive() Same reasons than the ones explained in commit 4179cb5a4c92 ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx() or gro_cells_receive() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro_cells infrastructure, as gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 18:05:52 UTC |
95d6ebd | Eric Dumazet | 10 March 2019, 16:07:14 UTC | net/x25: fix use-after-free in x25_device_event() In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 18:03:59 UTC |
d721fe9 | Kangjie Lu | 09 March 2019, 05:49:34 UTC | isdn: mISDNinfineon: fix potential NULL pointer dereference In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 17:58:08 UTC |
69b51bb | Shiju Jose | 10 March 2019, 06:47:51 UTC | net: hns3: fix to stop multiple HNS reset due to the AER changes The commit bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices") affected the non-fatal error recovery logic for the HNS and RDMA devices. This is because each HNS PF under PCIe bus receive callbacks from the AER driver when an error is reported for one of the PF. This causes unwanted PF resets because the HNS decides which PF to reset based on the reset type set. The HNS error handling code sets the reset type based on the hw error type detected. This patch provides fix for the above issue for the recovery of the hw errors in the HNS and RDMA devices. This patch needs backporting to the kernel v5.0+ Fixes: 332fbf576579 ("net: hns3: add handling of hw ras errors using new set of commands") Reported-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 06:58:47 UTC |
083b78a | Eric Dumazet | 09 March 2019, 22:43:38 UTC | ip: fix ip_mc_may_pull() return value ip_mc_may_pull() must return 0 if there is a problem, not an errno. syzbot reported : BUG: KASAN: use-after-free in br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline] BUG: KASAN: use-after-free in br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline] BUG: KASAN: use-after-free in br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741 Read of size 4 at addr ffff88820a4084ee by task syz-executor.2/11183 CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.0.0+ #14 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline] br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline] br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741 br_handle_frame_finish+0xa3a/0x14c0 net/bridge/br_input.c:108 br_nf_hook_thresh+0x2ec/0x380 net/bridge/br_netfilter_hooks.c:1005 br_nf_pre_routing_finish+0x8e2/0x1750 net/bridge/br_netfilter_hooks.c:410 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] br_nf_pre_routing+0x7e7/0x13a0 net/bridge/br_netfilter_hooks.c:506 nf_hook_entry_hookfn include/linux/netfilter.h:119 [inline] nf_hook_slow+0xbf/0x1f0 net/netfilter/core.c:511 nf_hook include/linux/netfilter.h:244 [inline] NF_HOOK include/linux/netfilter.h:287 [inline] br_handle_frame+0x95b/0x1450 net/bridge/br_input.c:305 __netif_receive_skb_core+0xa96/0x3040 net/core/dev.c:4902 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:4971 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5186 netif_receive_skb+0x6e/0x5a0 net/core/dev.c:5261 Fixes: ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 03:52:47 UTC |
1039c6e | Guillaume Nault | 09 March 2019, 09:26:53 UTC | net: keep refcount warning in reqsk_free() As Eric Dumazet said, "We do not have a way to tell if the req was ever inserted in a hash table, so better play safe.". Let's remove this comment, so that nobody will be tempted to drop the WARN_ON_ONCE() line. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 March 2019, 03:51:44 UTC |
1f5d861 | Nathan Chancellor | 08 March 2019, 04:02:39 UTC | net: stmmac: Avoid one more sometimes uninitialized Clang warning When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_systime wraps), as it may fail to initialize these values if the if condition was ever false (meaning the callback doesn't exist). It's not wrong because the callback is what initializes ns. While it's unlikely that the callback is going to disappear at some point and make that condition false, we can easily avoid this warning by zero initializing the variable. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 09 March 2019, 07:20:22 UTC |
7cbbee0 | Andrew Lunn | 08 March 2019, 00:21:27 UTC | net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports By default, the switch driver is expected to configure CPU and DSA ports to their maximum speed. For the 6341 and 6390 families, the ports interface mode has to be configured as well. The 6390X range support 10G ports using XAUI, while the 6341 and 6390 supports 2500BaseX, as their maximum speed. Fixes: 787799a9d555 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 09 March 2019, 06:55:28 UTC |
69ffaeb | David Howells | 09 March 2019, 00:29:58 UTC | rxrpc: Fix client call queueing, waiting for channel rxrpc_get_client_conn() adds a new call to the front of the waiting_calls queue if the connection it's going to use already exists. This is bad as it allows calls to get starved out. Fix this by adding to the tail instead. Also change the other enqueue point in the same function to put it on the front (ie. when we have a new connection). This makes the point that in the case of a new connection the new call goes at the front (though it doesn't actually matter since the queue should be unoccupied). Fixes: 45025bceef17 ("rxrpc: Improve management and caching of client connection objects") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 09 March 2019, 02:24:53 UTC |
c3ad3ec | David S. Miller | 09 March 2019, 02:23:29 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2019-03-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a crash in AF_XDP's xsk_diag_put_ring() which was passing wrong queue argument, from Eric. 2) Fix a regression due to wrong test for TCP GSO packets used in various BPF helpers like NAT64, from Willem. 3) Fix a sk_msg strparser warning which asserts that strparser must be stopped first, from Jakub. 4) Fix rejection of invalid options/bind flags in AF_XDP, from Björn. 5) Fix GSO in bpf_lwt_push_ip_encap() which must properly set inner headers and inner protocol, from Peter. 6) Fix a libbpf leak when kernel does not support BTF, from Nikita. 7) Various BPF selftest and libbpf build fixes to make out-of-tree compilation work and to properly resolve dependencies via fixdep target, from Stanislav. 8) Fix rejection of invalid ldimm64 imm field, from Daniel. 9) Fix bpf stats sysctl compile warning of unused helper function proc_dointvec_minmax_bpf_stats() under some configs, from Arnd. 10) Fix couple of warnings about using plain integer as NULL, from Bo. 11) Fix some BPF sample spelling mistakes, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 09 March 2019, 02:23:29 UTC |
9d3e136 | Guillaume Nault | 08 March 2019, 21:09:47 UTC | tcp: handle inet_csk_reqsk_queue_add() failures Commit 7716682cc58e ("tcp/dccp: fix another race at listener dismantle") let inet_csk_reqsk_queue_add() fail, and adjusted {tcp,dccp}_check_req() accordingly. However, TFO and syncookies weren't modified, thus leaking allocated resources on error. Contrary to tcp_check_req(), in both syncookies and TFO cases, we need to drop the request socket. Also, since the child socket is created with inet_csk_clone_lock(), we have to unlock it and drop an extra reference (->sk_refcount is initially set to 2 and inet_csk_reqsk_queue_add() drops only one ref). For TFO, we also need to revert the work done by tcp_try_fastopen() (with reqsk_fastopen_remove()). Fixes: 7716682cc58e ("tcp/dccp: fix another race at listener dismantle") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 09 March 2019, 00:05:10 UTC |
0907352 | Nathan Chancellor | 07 March 2019, 23:29:33 UTC | net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default case can never happen because i can only be 0 to 3 (NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang, just zero initialize class in the default case (use the macro CLASS_CODE_UNRECOG to make it clear this shouldn't happen). Link: https://github.com/ClangBuiltLinux/linux/issues/403 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:26:21 UTC |
580411d | Matthew Whitehead | 06 March 2019, 19:41:27 UTC | 8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC Add PCI vendor and device identifier for U.S. Robotics USR997901A 10/100 Cardbus NIC. Tested on real hardware. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:23:23 UTC |
5355ed6 | Eric Dumazet | 06 March 2019, 18:41:00 UTC | fou, fou6: avoid uninit-value in gue_err() and gue6_err() My prior commit missed the fact that these functions were using udp_hdr() (aka skb_transport_header()) to get access to GUE header. Since pskb_transport_may_pull() does not exist yet, we have to add transport_offset to our pskb_may_pull() calls. BUG: KMSAN: uninit-value in gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 CPU: 1 PID: 10648 Comm: syz-executor.1 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 __udp4_lib_err_encap_no_sk net/ipv4/udp.c:571 [inline] __udp4_lib_err_encap net/ipv4/udp.c:626 [inline] __udp4_lib_err+0x12e6/0x1d40 net/ipv4/udp.c:665 udp_err+0x74/0x90 net/ipv4/udp.c:737 icmp_socket_deliver net/ipv4/icmp.c:767 [inline] icmp_unreach+0xb65/0x1070 net/ipv4/icmp.c:884 icmp_rcv+0x11a1/0x1950 net/ipv4/icmp.c:1066 ip_protocol_deliver_rcu+0x584/0xbb0 net/ipv4/ip_input.c:208 ip_local_deliver_finish net/ipv4/ip_input.c:234 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_local_deliver+0x624/0x7b0 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish net/ipv4/ip_input.c:414 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_rcv+0x6bd/0x740 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core net/core/dev.c:4973 [inline] __netif_receive_skb net/core/dev.c:5083 [inline] process_backlog+0x756/0x10e0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x78b/0x1a60 net/core/dev.c:6412 __do_softirq+0x53f/0x93a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:375 [inline] irq_exit+0x214/0x250 kernel/softirq.c:416 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1064 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:814 </IRQ> RIP: 0010:finish_lock_switch+0x2b/0x40 kernel/sched/core.c:2597 Code: 48 89 e5 53 48 89 fb e8 63 e7 95 00 8b b8 88 0c 00 00 48 8b 00 48 85 c0 75 12 48 89 df e8 dd db 95 00 c6 00 00 c6 03 00 fb 5b <5d> c3 e8 4e e6 95 00 eb e7 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 RSP: 0018:ffff888081a0fc80 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13 RAX: ffff88821fd6bd80 RBX: ffff888027898000 RCX: ccccccccccccd000 RDX: ffff88821fca8d80 RSI: ffff888000000000 RDI: 00000000000004a0 RBP: ffff888081a0fc80 R08: 0000000000000002 R09: ffff888081a0fb08 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff88811130e388 R14: ffff88811130da00 R15: ffff88812fdb7d80 finish_task_switch+0xfc/0x2d0 kernel/sched/core.c:2698 context_switch kernel/sched/core.c:2851 [inline] __schedule+0x6cc/0x800 kernel/sched/core.c:3491 schedule+0x15b/0x240 kernel/sched/core.c:3535 freezable_schedule include/linux/freezer.h:172 [inline] do_nanosleep+0x2ba/0x980 kernel/time/hrtimer.c:1679 hrtimer_nanosleep kernel/time/hrtimer.c:1733 [inline] __do_sys_nanosleep kernel/time/hrtimer.c:1767 [inline] __se_sys_nanosleep+0x746/0x960 kernel/time/hrtimer.c:1754 __x64_sys_nanosleep+0x3e/0x60 kernel/time/hrtimer.c:1754 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x4855a0 Code: 00 00 48 c7 c0 d4 ff ff ff 64 c7 00 16 00 00 00 31 c0 eb be 66 0f 1f 44 00 00 83 3d b1 11 5d 00 00 75 14 b8 23 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 04 e2 f8 ff c3 48 83 ec 08 e8 3a 55 fd ff RSP: 002b:0000000000a4fd58 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 RAX: ffffffffffffffda RBX: 0000000000085780 RCX: 00000000004855a0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000a4fd60 RBP: 00000000000007ec R08: 0000000000000001 R09: 0000000000ceb940 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 R13: 0000000000a4fdb0 R14: 0000000000085711 R15: 0000000000a4fdc0 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4398 __kmalloc_reserve net/core/skbuff.c:140 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] alloc_skb_with_frags+0x186/0xa60 net/core/skbuff.c:5287 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108 __ip_append_data+0x34cd/0x5000 net/ipv4/ip_output.c:998 ip_append_data+0x324/0x480 net/ipv4/ip_output.c:1220 icmp_push_reply+0x23d/0x7e0 net/ipv4/icmp.c:375 __icmp_send+0x2ea3/0x30f0 net/ipv4/icmp.c:737 icmp_send include/net/icmp.h:47 [inline] ipv4_link_failure+0x6d/0x230 net/ipv4/route.c:1190 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0x106/0x1a0 net/ipv4/arp.c:297 neigh_invalidate+0x359/0x8e0 net/core/neighbour.c:992 neigh_timer_handler+0xdf2/0x1280 net/core/neighbour.c:1078 call_timer_fn+0x285/0x600 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers+0xdb4/0x11d0 kernel/time/timer.c:1681 run_timer_softirq+0x2e/0x50 kernel/time/timer.c:1694 __do_softirq+0x53f/0x93a kernel/softirq.c:293 Fixes: 26fc181e6cac ("fou, fou6: do not assume linear skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:19:53 UTC |
b62989f | Vlad Buslov | 06 March 2019, 15:50:43 UTC | net: sched: fix potential use-after-free in __tcf_chain_put() When used with unlocked classifier that have filters attached to actions with goto chain, __tcf_chain_put() for last non action reference can race with calls to same function from action cleanup code that releases last action reference. In this case action cleanup handler could free the chain if it executes after all references to chain were released, but before all concurrent users finished using it. Modify __tcf_chain_put() to only access tcf_chain fields when holding block->lock. Remove local variables that were used to cache some tcf_chain fields and are no longer needed because their values can now be obtained directly from chain under block->lock protection. Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:17:47 UTC |
81bf7bb | Arnd Bergmann | 06 March 2019, 11:05:49 UTC | vhost: silence an unused-variable warning On some architectures, the MMU can be disabled, leading to access_ok() becoming an empty macro that does not evaluate its size argument, which in turn produces an unused-variable warning: drivers/vhost/vhost.c:1191:9: error: unused variable 's' [-Werror,-Wunused-variable] size_t s = vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; Mark the variable as __maybe_unused to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:17:03 UTC |
4c404ce | Adalbert Lazăr | 06 March 2019, 10:13:53 UTC | vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock Previous to commit 22b5c0b63f32 ("vsock/virtio: fix kernel panic after device hot-unplug"), vsock_core_init() was called from virtio_vsock_probe(). Now, virtio_transport_reset_no_sock() can be called before vsock_core_init() has the chance to run. [Wed Feb 27 14:17:09 2019] BUG: unable to handle kernel NULL pointer dereference at 0000000000000110 [Wed Feb 27 14:17:09 2019] #PF error: [normal kernel read fault] [Wed Feb 27 14:17:09 2019] PGD 0 P4D 0 [Wed Feb 27 14:17:09 2019] Oops: 0000 [#1] SMP PTI [Wed Feb 27 14:17:09 2019] CPU: 3 PID: 59 Comm: kworker/3:1 Not tainted 5.0.0-rc7-390-generic-hvi #390 [Wed Feb 27 14:17:09 2019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [Wed Feb 27 14:17:09 2019] Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] RIP: 0010:virtio_transport_reset_no_sock+0x8c/0xc0 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] Code: 35 8b 4f 14 48 8b 57 08 31 f6 44 8b 4f 10 44 8b 07 48 8d 7d c8 e8 84 f8 ff ff 48 85 c0 48 89 c3 74 2a e8 f7 31 03 00 48 89 df <48> 8b 80 10 01 00 00 e8 68 fb 69 ed 48 8b 75 f0 65 48 33 34 25 28 [Wed Feb 27 14:17:09 2019] RSP: 0018:ffffb42701ab7d40 EFLAGS: 00010282 [Wed Feb 27 14:17:09 2019] RAX: 0000000000000000 RBX: ffff9d79637ee080 RCX: 0000000000000003 [Wed Feb 27 14:17:09 2019] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9d79637ee080 [Wed Feb 27 14:17:09 2019] RBP: ffffb42701ab7d78 R08: ffff9d796fae70e0 R09: ffff9d796f403500 [Wed Feb 27 14:17:09 2019] R10: ffffb42701ab7d90 R11: 0000000000000000 R12: ffff9d7969d09240 [Wed Feb 27 14:17:09 2019] R13: ffff9d79624e6840 R14: ffff9d7969d09318 R15: ffff9d796d48ff80 [Wed Feb 27 14:17:09 2019] FS: 0000000000000000(0000) GS:ffff9d796fac0000(0000) knlGS:0000000000000000 [Wed Feb 27 14:17:09 2019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Wed Feb 27 14:17:09 2019] CR2: 0000000000000110 CR3: 0000000427f22000 CR4: 00000000000006e0 [Wed Feb 27 14:17:09 2019] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [Wed Feb 27 14:17:09 2019] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [Wed Feb 27 14:17:09 2019] Call Trace: [Wed Feb 27 14:17:09 2019] virtio_transport_recv_pkt+0x63/0x820 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] ? kfree+0x17e/0x190 [Wed Feb 27 14:17:09 2019] ? detach_buf_split+0x145/0x160 [Wed Feb 27 14:17:09 2019] ? __switch_to_asm+0x40/0x70 [Wed Feb 27 14:17:09 2019] virtio_transport_rx_work+0xa0/0x106 [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] NET: Registered protocol family 40 [Wed Feb 27 14:17:09 2019] process_one_work+0x167/0x410 [Wed Feb 27 14:17:09 2019] worker_thread+0x4d/0x460 [Wed Feb 27 14:17:09 2019] kthread+0x105/0x140 [Wed Feb 27 14:17:09 2019] ? rescuer_thread+0x360/0x360 [Wed Feb 27 14:17:09 2019] ? kthread_destroy_worker+0x50/0x50 [Wed Feb 27 14:17:09 2019] ret_from_fork+0x35/0x40 [Wed Feb 27 14:17:09 2019] Modules linked in: vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common input_leds vsock serio_raw i2c_piix4 mac_hid qemu_fw_cfg autofs4 cirrus ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net psmouse drm net_failover pata_acpi virtio_blk failover floppy Fixes: 22b5c0b63f32 ("vsock/virtio: fix kernel panic after device hot-unplug") Reported-by: Alexandru Herghelegiu <aherghelegiu@bitdefender.com> Signed-off-by: Adalbert Lazăr <alazar@bitdefender.com> Co-developed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:15:44 UTC |
6d2b0f0 | Li RongQing | 06 March 2019, 06:46:27 UTC | connector: fix unsafe usage of ->real_parent proc_exit_connector() uses ->real_parent lockless. This is not safe that its parent can go away at any moment, so use RCU to protect it, and ensure that this task is not released. [ 747.624551] ================================================================== [ 747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310 [ 747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882 [ 747.648032] [ 747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G E 4.19.26-rc2 #11 [ 747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014 [ 747.668419] Call Trace: [ 747.671269] dump_stack+0xf0/0x19b [ 747.675186] ? show_regs_print_info+0x5/0x5 [ 747.679988] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 747.685302] print_address_description+0x6a/0x270 [ 747.691162] kasan_report+0x258/0x380 [ 747.695835] ? proc_exit_connector+0x1f7/0x310 [ 747.701402] proc_exit_connector+0x1f7/0x310 [ 747.706767] ? proc_coredump_connector+0x2d0/0x2d0 [ 747.712715] ? _raw_write_unlock_irq+0x29/0x50 [ 747.718270] ? _raw_write_unlock_irq+0x29/0x50 [ 747.723820] ? ___preempt_schedule+0x16/0x18 [ 747.729193] ? ___preempt_schedule+0x16/0x18 [ 747.734574] do_exit+0xa11/0x14f0 [ 747.738880] ? mm_update_next_owner+0x590/0x590 [ 747.744525] ? debug_show_all_locks+0x3c0/0x3c0 [ 747.761448] ? ktime_get_coarse_real_ts64+0xeb/0x1c0 [ 747.767589] ? lockdep_hardirqs_on+0x1a6/0x290 [ 747.773154] ? check_chain_key+0x139/0x1f0 [ 747.778345] ? check_flags.part.35+0x240/0x240 [ 747.783908] ? __lock_acquire+0x2300/0x2300 [ 747.789171] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.795316] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.801457] ? do_raw_spin_unlock+0x10f/0x1e0 [ 747.806914] ? do_raw_spin_trylock+0x120/0x120 [ 747.812481] ? preempt_count_sub+0x14/0xc0 [ 747.817645] ? _raw_spin_unlock+0x2e/0x50 [ 747.822708] ? __handle_mm_fault+0x12db/0x1fa0 [ 747.828367] ? __pmd_alloc+0x2d0/0x2d0 [ 747.833143] ? check_noncircular+0x50/0x50 [ 747.838309] ? match_held_lock+0x7f/0x340 [ 747.843380] ? check_noncircular+0x50/0x50 [ 747.848561] ? handle_mm_fault+0x21a/0x5f0 [ 747.853730] ? check_flags.part.35+0x240/0x240 [ 747.859290] ? check_chain_key+0x139/0x1f0 [ 747.864474] ? __do_page_fault+0x40f/0x760 [ 747.869655] ? __audit_syscall_entry+0x4b/0x1f0 [ 747.875319] ? syscall_trace_enter+0x1d5/0x7b0 [ 747.880877] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.887895] ? trace_raw_output_sys_exit+0x80/0x80 [ 747.893860] ? up_read+0x3b/0x90 [ 747.898142] ? stop_critical_timings+0x260/0x260 [ 747.903909] do_group_exit+0xe0/0x1c0 [ 747.908591] ? __x64_sys_exit+0x30/0x30 [ 747.913460] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.920485] ? tracer_hardirqs_on+0x270/0x270 [ 747.925956] __x64_sys_exit_group+0x28/0x30 [ 747.931214] do_syscall_64+0x117/0x400 [ 747.935988] ? syscall_return_slowpath+0x2f0/0x2f0 [ 747.941931] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.947788] ? trace_hardirqs_on_caller+0x1d0/0x1d0 [ 747.953838] ? lockdep_sys_exit+0x16/0x8e [ 747.958915] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.964784] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 747.971021] RIP: 0033:0x7f572f154c68 [ 747.975606] Code: Bad RIP value. [ 747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68 [ 747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 [ 748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0 [ 748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840 [ 748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310 [ 748.032287] [ 748.034509] Allocated by task 2300: [ 748.038982] kasan_kmalloc+0xa0/0xd0 [ 748.043562] kmem_cache_alloc_node+0xf5/0x2e0 [ 748.049018] copy_process+0x1781/0x4790 [ 748.053884] _do_fork+0x166/0x9a0 [ 748.058163] do_syscall_64+0x117/0x400 [ 748.062943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.069180] [ 748.071405] Freed by task 15395: [ 748.075591] __kasan_slab_free+0x130/0x180 [ 748.080752] kmem_cache_free+0xc2/0x310 [ 748.085619] free_task+0xea/0x130 [ 748.089901] __put_task_struct+0x177/0x230 [ 748.095063] finish_task_switch+0x51b/0x5d0 [ 748.100315] __schedule+0x506/0xfa0 [ 748.104791] schedule+0xca/0x260 [ 748.108978] futex_wait_queue_me+0x27e/0x420 [ 748.114333] futex_wait+0x251/0x550 [ 748.118814] do_futex+0x75b/0xf80 [ 748.123097] __x64_sys_futex+0x231/0x2a0 [ 748.128065] do_syscall_64+0x117/0x400 [ 748.132835] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.139066] [ 748.141289] The buggy address belongs to the object at ffff88a027698000 [ 748.141289] which belongs to the cache task_struct of size 12160 [ 748.156589] The buggy address is located 2272 bytes inside of [ 748.156589] 12160-byte region [ffff88a027698000, ffff88a02769af80) [ 748.171114] The buggy address belongs to the page: [ 748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0 [ 748.189136] flags: 0x57ffffc0008100(slab|head) [ 748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00 [ 748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000 [ 748.214146] page dumped because: kasan: bad access detected [ 748.220976] [ 748.223197] Memory state around the buggy address: [ 748.229128] ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.238271] ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.256564] ^ [ 748.264267] ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.273493] ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.282630] ================================================================== Fixes: b086ff87251b4a4 ("connector: add parent pid and tgid to coredump and exit events") Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 23:06:38 UTC |
f98ec78 | Litao Jiao | 06 March 2019, 04:01:48 UTC | vxlan: do not need BH again in vxlan_cleanup() vxlan_cleanup() is a timer callback, it is already and only running in BH context. Signed-off-by: Litao Jiao <jiaolitao@raisecom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 22:45:42 UTC |
d394d33 | Jian Shen | 06 March 2019, 03:26:37 UTC | net: hns3: add dma_rmb() for rx description HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 22:42:37 UTC |
161e613 | Pedro Tammela | 05 March 2019, 14:35:54 UTC | net: add missing documentation in linux/skbuff.h This patch adds missing documentation for some inline functions on linux/skbuff.h. The patch is incomplete and a lot more can be added, just wondering if it's of interest of the netdev developers. Also fixed some whitespaces. Signed-off-by: Pedro Tammela <pctammela@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 22:38:19 UTC |
71b91a5 | Bo YU | 08 March 2019, 06:45:51 UTC | bpf: fix warning about using plain integer as NULL Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/ CHECK net/bpf//test_run.c net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer ./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer Fixes: 8bad74f9840f ("bpf: extend cgroup bpf core to allow multiple cgroup storage types") Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 08 March 2019, 20:17:07 UTC |
c57b557 | Björn Töpel | 08 March 2019, 07:57:27 UTC | xsk: fix to reject invalid options in Tx descriptor Passing a non-existing option in the options member of struct xdp_desc was, incorrectly, silently ignored. This patch addresses that behavior, and drops any Tx descriptor with non-existing options. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 08 March 2019, 20:17:06 UTC |
f54ba39 | Björn Töpel | 08 March 2019, 07:57:26 UTC | xsk: fix to reject invalid flags in xsk_bind Passing a non-existing flag in the sxdp_flags member of struct sockaddr_xdp was, incorrectly, silently ignored. This patch addresses that behavior, and rejects any non-existing flags. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 965a99098443 ("xsk: add support for bind for Rx") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 08 March 2019, 20:17:06 UTC |
243b4cd | Nikita V. Shirokov | 08 March 2019, 05:18:14 UTC | bpf, libbpf: fixing leak when kernel does not support btf We could end up in situation when we have object file w/ all btf info, but kernel does not support btf yet. In this situation currently libbpf just set obj->btf to NULL w/o freeing it first. This patch is fixing it by making sure to run btf__free first. Fixes: d29d87f7e612 ("btf: separate btf creation and loading") Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 08 March 2019, 20:16:36 UTC |
ffb3016 | David S. Miller | 08 March 2019, 19:48:20 UTC | Merge branch 'stmmac-add-some-fixes-for-stm32' Christophe Roullier says: ==================== stmmac: add some fixes for stm32 For common stmmac: - Add support to set CSR Clock range selection in DT For stm32mpu: - Glue codes to support magic packet - Glue codes to support all PHY config : PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config For stm32mcu: - Add Ethernet support for stm32h7 Changes in V3: - Reverse for syscfg management because it is manage by these patches https://lkml.org/lkml/2018/12/12/133 https://lkml.org/lkml/2018/12/12/134 https://lkml.org/lkml/2018/12/12/131 https://lkml.org/lkml/2018/12/12/132 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:20 UTC |
5473f1b | Christophe Roullier | 05 March 2019, 08:29:28 UTC | ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it for eval and disco boards Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII with PHY SMSC LAN8742 Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
8356679 | Christophe Roullier | 05 March 2019, 08:29:27 UTC | dt-bindings: net: stmmac: remove syscfg clock property Syscfg clock is no more needed. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
81311c0 | Christophe Roullier | 05 March 2019, 08:29:26 UTC | net: ethernet: stmmac: add management of clk_csr property In Documentation stmmac.txt there is possibility to fixed CSR Clock range selection with property clk_csr. This patch add the management of this property For example to use it, add in your ethernet node DT: clk_csr = <3>; Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
830133d | Christophe Roullier | 05 March 2019, 08:29:25 UTC | dt-bindings: net: stmmac: add phys config properties Add properties to support all Phy config PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
2294733 | Christophe Roullier | 05 March 2019, 08:29:24 UTC | net: ethernet: stmmac: update to support all PHY config for stm32mp157c. Update glue codes to support all PHY config on stm32mp157c PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
634565f | Christophe Roullier | 05 March 2019, 08:29:23 UTC | net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c. Add glue codes to support magic packet on stm32mp157c Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:48:19 UTC |
f1a1670 | David S. Miller | 08 March 2019, 19:42:50 UTC | Merge branch 'sctp-process-the-error-returned-from-sctp_sock_migrate' Xin Long says: ==================== sctp: process the error returned from sctp_sock_migrate() This patchset is to process the errs returned by sctp_auth_init_hmacs() and sctp_bind_addr_dup() from sctp_sock_migrate(). And also fix a panic caused by new ep->auth_hmacs was not set due to net->sctp.auth_enable changed by sysctl before accepting an assoc. ==================== Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:42:50 UTC |
c6f33e0 | Xin Long | 03 March 2019, 09:54:55 UTC | sctp: call sctp_auth_init_hmacs() in sctp_sock_migrate() New ep's auth_hmacs should be set if old ep's is set, in case that net->sctp.auth_enable has been changed to 0 by users and new ep's auth_hmacs couldn't be set in sctp_endpoint_init(). It can even crash kernel by doing: 1. on server: sysctl -w net.sctp.auth_enable=1, sysctl -w net.sctp.addip_enable=1, sysctl -w net.sctp.addip_noauth_enable=0, listen() on server, sysctl -w net.sctp.auth_enable=0. 2. on client: connect() to server. 3. on server: accept() the asoc, sysctl -w net.sctp.auth_enable=1. 4. on client: send() asconf packet to server. The call trace: [ 245.280251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 245.286872] RIP: 0010:sctp_auth_calculate_hmac+0xa3/0x140 [sctp] [ 245.304572] Call Trace: [ 245.305091] <IRQ> [ 245.311287] sctp_sf_authenticate+0x110/0x160 [sctp] [ 245.312311] sctp_sf_eat_auth+0xf2/0x230 [sctp] [ 245.313249] sctp_do_sm+0x9a/0x2d0 [sctp] [ 245.321483] sctp_assoc_bh_rcv+0xed/0x1a0 [sctp] [ 245.322495] sctp_rcv+0xa66/0xc70 [sctp] It's because the old ep->auth_hmacs wasn't copied to the new ep while ep->auth_hmacs is used in sctp_auth_calculate_hmac() when processing the incoming auth chunks, and it should have been done when migrating sock. Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:42:49 UTC |
60208f7 | Xin Long | 03 March 2019, 09:54:54 UTC | sctp: move up sctp_auth_init_hmacs() in sctp_endpoint_init() sctp_auth_init_hmacs() is called only when ep->auth_enable is set. It better to move up sctp_auth_init_hmacs() and remove auth_enable check in it and check auth_enable only once in sctp_endpoint_init(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:42:49 UTC |
89664c6 | Xin Long | 03 March 2019, 09:54:53 UTC | sctp: sctp_sock_migrate() returns error if sctp_bind_addr_dup() fails It should fail to create the new sk if sctp_bind_addr_dup() fails when accepting or peeloff an association. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:42:49 UTC |
ad6c998 | Stefano Brivio | 08 March 2019, 15:40:57 UTC | vxlan: Fix GRO cells race condition between receive and link delete If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df87997 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:27:21 UTC |
930c9f9 | David Howells | 08 March 2019, 12:48:39 UTC | rxrpc: Fix client call connect/disconnect race rxrpc_disconnect_client_call() reads the call's connection ID protocol value (call->cid) as part of that function's variable declarations. This is bad because it's not inside the locked section and so may race with someone granting use of the channel to the call. This manifests as an assertion failure (see below) where the call in the presumed channel (0 because call->cid wasn't set when we read it) doesn't match the call attached to the channel we were actually granted (if 1, 2 or 3). Fix this by moving the read and dependent calculations inside of the channel_lock section. Also, only set the channel number and pointer variables if cid is not zero (ie. unset). This problem can be induced by injecting an occasional error in rxrpc_wait_for_channel() before the call to schedule(). Make two further changes also: (1) Add a trace for wait failure in rxrpc_connect_call(). (2) Drop channel_lock before BUG'ing in the case of the assertion failure. The failure causes a trace akin to the following: rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/conn_client.c:824! ... RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d ... Call Trace: rxrpc_connect_call+0x902/0x9b3 ? wake_up_q+0x54/0x54 rxrpc_new_client_call+0x3a0/0x751 ? rxrpc_kernel_begin_call+0x141/0x1bc ? afs_alloc_call+0x1b5/0x1b5 rxrpc_kernel_begin_call+0x141/0x1bc afs_make_call+0x20c/0x525 ? afs_alloc_call+0x1b5/0x1b5 ? __lock_is_held+0x40/0x71 ? lockdep_init_map+0xaf/0x193 ? lockdep_init_map+0xaf/0x193 ? __lock_is_held+0x40/0x71 ? yfs_fs_fetch_data+0x33b/0x34a yfs_fs_fetch_data+0x33b/0x34a afs_fetch_data+0xdc/0x3b7 afs_read_dir+0x52d/0x97f afs_dir_iterate+0xa0/0x661 ? iterate_dir+0x63/0x141 iterate_dir+0xa2/0x141 ksys_getdents64+0x9f/0x11b ? filldir+0x111/0x111 ? do_syscall_64+0x3e/0x1a0 __x64_sys_getdents64+0x16/0x19 do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 45025bceef17 ("rxrpc: Improve management and caching of client connection objects") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:26:16 UTC |
2e990df | Xin Long | 08 March 2019, 07:49:16 UTC | sctp: remove sched init from sctp_stream_init syzbot reported a NULL-ptr deref caused by that sched->init() in sctp_stream_init() set stream->rr_next = NULL. kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:sctp_sched_rr_dequeue+0xd3/0x170 net/sctp/stream_sched_rr.c:141 Call Trace: sctp_outq_dequeue_data net/sctp/outqueue.c:90 [inline] sctp_outq_flush_data net/sctp/outqueue.c:1079 [inline] sctp_outq_flush+0xba2/0x2790 net/sctp/outqueue.c:1205 All sched info is saved in sout->ext now, in sctp_stream_init() sctp_stream_alloc_out() will not change it, there's no need to call sched->init() again, since sctp_outq_init() has already done it. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+4c9934f20522c0efd657@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 19:24:33 UTC |
ee60ad2 | Xin Long | 08 March 2019, 06:50:54 UTC | route: set the deleted fnhe fnhe_daddr to 0 in ip_del_fnhe to fix a race The race occurs in __mkroute_output() when 2 threads lookup a dst: CPU A CPU B find_exception() find_exception() [fnhe expires] ip_del_fnhe() [fnhe is deleted] rt_bind_exception() In rt_bind_exception() it will bind a deleted fnhe with the new dst, and this dst will get no chance to be freed. It causes a dev defcnt leak and consecutive dmesg warnings: unregister_netdevice: waiting for ethX to become free. Usage count = 1 Especially thanks Jon to identify the issue. This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr and daddr in rt_bind_exception(). It works as both ip_del_fnhe() and rt_bind_exception() are protected by fnhe_lock and the fhne is freed by kfree_rcu(). Fixes: deed49df7390 ("route: check and remove route cache when we get route") Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2019, 18:50:34 UTC |
40ba1d9 | Pablo Neira Ayuso | 07 March 2019, 23:58:53 UTC | netfilter: nf_tables: fix set double-free in abort path The abort path can cause a double-free of an anonymous set. Added-and-to-be-aborted rule looks like this: udp dport { 137, 138 } drop The to-be-aborted transaction list looks like this: newset newsetelem newsetelem rule This gets walked in reverse order, so first pass disables the rule, the set elements, then the set. After synchronize_rcu(), we then destroy those in same order: rule, set element, set element, newset. Problem is that the anonymous set has already been bound to the rule, so the rule (lookup expression destructor) already frees the set, when then cause use-after-free when trying to delete the elements from this set, then try to free the set again when handling the newset expression. Rule releases the bound set in first place from the abort path, this causes the use-after-free on set element removal when undoing the new element transactions. To handle this, skip new element transaction if set is bound from the abort path. This is still causes the use-after-free on set element removal. To handle this, remove transaction from the list when the set is already bound. Joint work with Florian Westphal. Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path") Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1325 Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 08 March 2019, 15:41:18 UTC |
46f7487 | Florian Westphal | 06 March 2019, 11:44:17 UTC | netfilter: nat: don't register device notifier twice Otherwise, we get notifier list corruption. This is the most simple fix: remove the device notifier call chain from the ipv6 masquerade register function and handle it only in the ipv4 version. The better fix is merge nf_nat_masquerade_ipv4/6_(un)register_notifier into a single nf_nat_masquerade_(un)register_notifiers but to do this its needed to first merge the two masquerade modules into a single xt_MASQUERADE. Furthermore, we need to use different refcounts for ipv4/ipv6 until we can merge MASQUERADE. Fixes: d1aca8ab3104a ("netfilter: nat: merge ipv4 and ipv6 masquerade functionality") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 08 March 2019, 15:41:09 UTC |
1e02796 | Eric Dumazet | 07 March 2019, 17:36:33 UTC | net/hsr: fix possible crash in add_timer() syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 19:02:08 UTC |
eaab2d2 | Dirk van der Merwe | 07 March 2019, 18:52:13 UTC | nfp: fix simple vNIC mailbox length The simple vNIC mailbox length should be 12 decimal and not 0x12. Using a decimal also makes it clear this is a length value and not another field within the simple mailbox defines. Found by code inspection, there are no known firmware configurations where this would cause issues. Fixes: 527d7d1b9949 ("nfp: read mailbox address from TLV caps") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 19:00:21 UTC |
0805a4b | Nathan Chancellor | 07 March 2019, 18:11:26 UTC | net: atm: Add another IS_ENABLED(CONFIG_COMPAT) in atm_dev_ioctl I removed compat's universal assignment to 0, which allows this if statement to fall through when compat is passed with a value other than 0. Fixes: f9d19a7494e5 ("net: atm: Use IS_ENABLED in atm_dev_ioctl") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 18:14:50 UTC |
df10317 | Nathan Chancellor | 07 March 2019, 18:00:28 UTC | net: stmmac: Avoid sometimes uninitialized Clang warnings When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_timestamp and stmmac_config_sub_second_increment wrap), as it may fail to initialize these values if the if condition was ever false (meaning the callbacks don't exist). It's not wrong because the callbacks (get_timestamp and config_sub_second_increment respectively) are the ones that initialize the variables. While it's unlikely that the callbacks are ever going to disappear and make that condition false, we can easily avoid this warning by zero initialize the variables. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 18:14:19 UTC |
f9d19a7 | Nathan Chancellor | 07 March 2019, 16:57:42 UTC | net: atm: Use IS_ENABLED in atm_dev_ioctl When building with -Wsometimes-uninitialized, Clang warns: net/atm/resources.c:256:6: warning: variable 'number' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] net/atm/resources.c:212:7: warning: variable 'iobuf_len' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] Clang won't realize that compat is 0 when CONFIG_COMPAT is not set until the constant folding stage, which happens after this semantic analysis. Use IS_ENABLED instead so that the zero is present at the semantic analysis stage, which eliminates this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/386 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:52:56 UTC |
3499e87 | Arnd Bergmann | 07 March 2019, 15:58:35 UTC | ethtool: reduce stack usage with clang clang inlines the dev_ethtool() more aggressively than gcc does, leading to a larger amount of used stack space: net/core/ethtool.c:2536:24: error: stack frame size of 1216 bytes in function 'dev_ethtool' [-Werror,-Wframe-larger-than=] Marking the sub-functions that require the most stack space as noinline_for_stack gives us reasonable behavior on all compilers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:45:21 UTC |
b89869d | Sudarsana Reddy Kalluru | 07 March 2019, 15:56:35 UTC | qede: Fix internal loopback failure with jumbo mtu configuration Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:43:30 UTC |
43d2816 | Arnd Bergmann | 07 March 2019, 15:52:24 UTC | enic: fix build warning without CONFIG_CPUMASK_OFFSTACK The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:41:08 UTC |
a2ae6da | Arnd Bergmann | 07 March 2019, 10:31:55 UTC | peak_usb: fix clang build warning Clang points out undefined behavior when building the pcan_usb_pro driver: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs] Changing the function prototype to avoid argument promotion in the varargs call avoids the warning, and should make this well-defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:39:46 UTC |
ae9819e | Masaru Nagai | 07 March 2019, 10:24:47 UTC | ravb: Decrease TxFIFO depth of Q3 and Q2 to one Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:31:05 UTC |
8a72b81 | Arnd Bergmann | 07 March 2019, 09:32:07 UTC | isdn: isdnloop: fix pointer dereference bug clang has spotted an ancient code bug and warns about it with: drivers/isdn/isdnloop/isdnloop.c:573:12: error: address of array 'card->rcard' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] This is an array of pointers, so we should check if a specific pointer exists in the array before using it, not whether the array itself exists. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:25:52 UTC |
f096ca6 | Arnd Bergmann | 07 March 2019, 09:31:20 UTC | davinci_emac: always build in CONFIG_OF code clang warns about what seems to be an unintended use of an obscure C language feature where a forward declaration of an array remains usable when the final definition is never seen: drivers/net/ethernet/ti/davinci_emac.c:1694:34: error: tentative array definition assumed to have one element [-Werror] static const struct of_device_id davinci_emac_of_match[]; There is no harm in always enabling the device tree matching code here, and it makes the code behave in a more conventional way aside from avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 March 2019, 17:22:35 UTC |
2018239 | Daniel Borkmann | 04 March 2019, 20:08:53 UTC | bpf: fix replace_map_fd_with_map_ptr's ldimm64 second imm field Non-zero imm value in the second part of the ldimm64 instruction for BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd only ever sits in the first instructions' imm field. None of the BPF loaders known to us are using it, so risk of regression is minimal. For clarity and consistency, the few insn->{src_reg,imm} occurrences are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF selftest suite as well. Fixes: 0246e64d9a5f ("bpf: handle pseudo BPF_LD_IMM64 insn") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 07 March 2019, 16:47:13 UTC |
e8e3437 | Jakub Sitnicki | 07 March 2019, 10:35:43 UTC | bpf: Stop the psock parser before canceling its work We might have never enabled (started) the psock's parser, in which case it will not get stopped when destroying the psock. This leads to a warning when trying to cancel parser's work from psock's deferred destructor: [ 405.325769] WARNING: CPU: 1 PID: 3216 at net/strparser/strparser.c:526 strp_done+0x3c/0x40 [ 405.326712] Modules linked in: [last unloaded: test_bpf] [ 405.327359] CPU: 1 PID: 3216 Comm: kworker/1:164 Tainted: G W 5.0.0 #42 [ 405.328294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014 [ 405.329712] Workqueue: events sk_psock_destroy_deferred [ 405.330254] RIP: 0010:strp_done+0x3c/0x40 [ 405.330706] Code: 28 e8 b8 d5 6b ff 48 8d bb 80 00 00 00 e8 9c d5 6b ff 48 8b 7b 18 48 85 ff 74 0d e8 1e a5 e8 ff 48 c7 43 18 00 00 00 00 5b c3 <0f> 0b eb cf 66 66 66 66 90 55 89 f5 53 48 89 fb 48 83 c7 28 e8 0b [ 405.332862] RSP: 0018:ffffc900026bbe50 EFLAGS: 00010246 [ 405.333482] RAX: ffffffff819323e0 RBX: ffff88812cb83640 RCX: ffff88812cb829e8 [ 405.334228] RDX: 0000000000000001 RSI: ffff88812cb837e8 RDI: ffff88812cb83640 [ 405.335366] RBP: ffff88813fd22680 R08: 0000000000000000 R09: 000073746e657665 [ 405.336472] R10: 8080808080808080 R11: 0000000000000001 R12: ffff88812cb83600 [ 405.337760] R13: 0000000000000000 R14: ffff88811f401780 R15: ffff88812cb837e8 [ 405.338777] FS: 0000000000000000(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000 [ 405.339903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 405.340821] CR2: 00007fb11489a6b8 CR3: 000000012d4d6000 CR4: 00000000000406e0 [ 405.341981] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 405.343131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 405.344415] Call Trace: [ 405.344821] sk_psock_destroy_deferred+0x23/0x1b0 [ 405.345585] process_one_work+0x1ae/0x3e0 [ 405.346110] worker_thread+0x3c/0x3b0 [ 405.346576] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 405.347187] kthread+0x11d/0x140 [ 405.347601] ? __kthread_parkme+0x80/0x80 [ 405.348108] ret_from_fork+0x35/0x40 [ 405.348566] ---[ end trace a4a3af4026a327d4 ]--- Stop psock's parser just before canceling its work. Fixes: 1d79895aef18 ("sk_msg: Always cancel strp work before freeing the psock") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 07 March 2019, 14:16:20 UTC |
69b0917 | Stanislav Fomichev | 06 March 2019, 23:25:26 UTC | selftests: bpf: test_progs: initialize duration in singal_pending test CHECK macro implicitly uses duration. We call CHECK() a couple of times before duration is initialized from bpf_prog_test_run(). Explicitly set duration to 0 to avoid compiler warnings. Fixes: 740f8a657221 ("selftests/bpf: make sure signal interrupts BPF_PROG_TEST_RUN") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 07 March 2019, 09:46:25 UTC |