Revision 4860abb91f3d7fbaf8147d54782149bb1fc45892 authored by Steve French on 06 February 2024, 22:34:22 UTC, committed by Steve French on 16 February 2024, 04:19:23 UTC
The conversion to netfs in the 6.3 kernel caused a regression when maximum write size is set by the server to an unexpected value which is not a multiple of 4096 (similarly if the user overrides the maximum write size by setting mount parm "wsize", but sets it to a value that is not a multiple of 4096). When negotiated write size is not a multiple of 4096 the netfs code can skip the end of the final page when doing large sequential writes, causing data corruption. This section of code is being rewritten/removed due to a large netfs change, but until that point (ie for the 6.3 kernel until now) we can not support non-standard maximum write sizes. Add a warning if a user specifies a wsize on mount that is not a multiple of 4096 (and round down), also add a change where we round down the maximum write size if the server negotiates a value that is not a multiple of 4096 (we also have to check to make sure that we do not round it down to zero). Reported-by: R. Diez" <rdiez-2006@rd10.de> Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list") Suggested-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Cc: stable@vger.kernel.org # v6.3+ Cc: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
1 parent 8bde59b
ucs2_string.c
// SPDX-License-Identifier: GPL-2.0
#include <linux/ucs2_string.h>
#include <linux/module.h>
/* Return the number of unicode characters in data */
unsigned long
ucs2_strnlen(const ucs2_char_t *s, size_t maxlength)
{
unsigned long length = 0;
while (*s++ != 0 && length < maxlength)
length++;
return length;
}
EXPORT_SYMBOL(ucs2_strnlen);
unsigned long
ucs2_strlen(const ucs2_char_t *s)
{
return ucs2_strnlen(s, ~0UL);
}
EXPORT_SYMBOL(ucs2_strlen);
/*
* Return the number of bytes is the length of this string
* Note: this is NOT the same as the number of unicode characters
*/
unsigned long
ucs2_strsize(const ucs2_char_t *data, unsigned long maxlength)
{
return ucs2_strnlen(data, maxlength/sizeof(ucs2_char_t)) * sizeof(ucs2_char_t);
}
EXPORT_SYMBOL(ucs2_strsize);
/**
* ucs2_strscpy() - Copy a UCS2 string into a sized buffer.
*
* @dst: Pointer to the destination buffer where to copy the string to.
* @src: Pointer to the source buffer where to copy the string from.
* @count: Size of the destination buffer, in UCS2 (16-bit) characters.
*
* Like strscpy(), only for UCS2 strings.
*
* Copy the source string @src, or as much of it as fits, into the destination
* buffer @dst. The behavior is undefined if the string buffers overlap. The
* destination buffer @dst is always NUL-terminated, unless it's zero-sized.
*
* Return: The number of characters copied into @dst (excluding the trailing
* %NUL terminator) or -E2BIG if @count is 0 or @src was truncated due to the
* destination buffer being too small.
*/
ssize_t ucs2_strscpy(ucs2_char_t *dst, const ucs2_char_t *src, size_t count)
{
long res;
/*
* Ensure that we have a valid amount of space. We need to store at
* least one NUL-character.
*/
if (count == 0 || WARN_ON_ONCE(count > INT_MAX / sizeof(*dst)))
return -E2BIG;
/*
* Copy at most 'count' characters, return early if we find a
* NUL-terminator.
*/
for (res = 0; res < count; res++) {
ucs2_char_t c;
c = src[res];
dst[res] = c;
if (!c)
return res;
}
/*
* The loop above terminated without finding a NUL-terminator,
* exceeding the 'count': Enforce proper NUL-termination and return
* error.
*/
dst[count - 1] = 0;
return -E2BIG;
}
EXPORT_SYMBOL(ucs2_strscpy);
int
ucs2_strncmp(const ucs2_char_t *a, const ucs2_char_t *b, size_t len)
{
while (1) {
if (len == 0)
return 0;
if (*a < *b)
return -1;
if (*a > *b)
return 1;
if (*a == 0) /* implies *b == 0 */
return 0;
a++;
b++;
len--;
}
}
EXPORT_SYMBOL(ucs2_strncmp);
unsigned long
ucs2_utf8size(const ucs2_char_t *src)
{
unsigned long i;
unsigned long j = 0;
for (i = 0; src[i]; i++) {
u16 c = src[i];
if (c >= 0x800)
j += 3;
else if (c >= 0x80)
j += 2;
else
j += 1;
}
return j;
}
EXPORT_SYMBOL(ucs2_utf8size);
/*
* copy at most maxlength bytes of whole utf8 characters to dest from the
* ucs2 string src.
*
* The return value is the number of characters copied, not including the
* final NUL character.
*/
unsigned long
ucs2_as_utf8(u8 *dest, const ucs2_char_t *src, unsigned long maxlength)
{
unsigned int i;
unsigned long j = 0;
unsigned long limit = ucs2_strnlen(src, maxlength);
for (i = 0; maxlength && i < limit; i++) {
u16 c = src[i];
if (c >= 0x800) {
if (maxlength < 3)
break;
maxlength -= 3;
dest[j++] = 0xe0 | (c & 0xf000) >> 12;
dest[j++] = 0x80 | (c & 0x0fc0) >> 6;
dest[j++] = 0x80 | (c & 0x003f);
} else if (c >= 0x80) {
if (maxlength < 2)
break;
maxlength -= 2;
dest[j++] = 0xc0 | (c & 0x7c0) >> 6;
dest[j++] = 0x80 | (c & 0x03f);
} else {
maxlength -= 1;
dest[j++] = c & 0x7f;
}
}
if (maxlength)
dest[j] = '\0';
return j;
}
EXPORT_SYMBOL(ucs2_as_utf8);
MODULE_LICENSE("GPL v2");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...