| 4a23717 | Davidlohr Bueso | 13 December 2014, 00:54:30 UTC | uprobes: share the i_mmap_rwsem Both register and unregister call build_map_info() in order to create the list of mappings before installing or removing breakpoints for every mm which maps file backed memory. As such, there is no reason to hold the i_mmap_rwsem exclusively, so share it and allow concurrent readers to build the mapping data. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| 3dec0ba | Davidlohr Bueso | 13 December 2014, 00:54:27 UTC | mm/rmap: share the i_mmap_rwsem Similarly to the anon memory counterpart, we can share the mapping's lock ownership as the interval tree is not modified when doing doing the walk, only the file page. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name> Acked-by: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| c8c06ef | Davidlohr Bueso | 13 December 2014, 00:54:24 UTC | mm: convert i_mmap_mutex to rwsem The i_mmap_mutex is a close cousin of the anon vma lock, both protecting similar data, one for file backed pages and the other for anon memory. To this end, this lock can also be a rwsem. In addition, there are some important opportunities to share the lock when there are no tree modifications. This conversion is straightforward. For now, all users take the write lock. [sfr@canb.auug.org.au: update fremap.c] Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name> Acked-by: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| 83cde9e | Davidlohr Bueso | 13 December 2014, 00:54:21 UTC | mm: use new helper functions around the i_mmap_mutex Convert all open coded mutex_lock/unlock calls to the i_mmap_[lock/unlock]_write() helpers. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name> Acked-by: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| 8b28f62 | Davidlohr Bueso | 13 December 2014, 00:54:18 UTC | mm,fs: introduce helpers around the i_mmap_mutex This series is a continuation of the conversion of the i_mmap_mutex to rwsem, following what we have for the anon memory counterpart. With Hugh's feedback from the first iteration. Ultimately, the most obvious paths that require exclusive ownership of the lock is when we modify the VMA interval tree, via vma_interval_tree_insert() and vma_interval_tree_remove() families. Cases such as unmapping, where the ptes content is changed but the tree remains untouched should make it safe to share the i_mmap_rwsem. As such, the code of course is straightforward, however the devil is very much in the details. While its been tested on a number of workloads without anything exploding, I would not be surprised if there are some less documented/known assumptions about the lock that could suffer from these changes. Or maybe I'm just missing something, but either way I believe its at the point where it could use more eyes and hopefully some time in linux-next. Because the lock type conversion is the heart of this patchset, its worth noting a few comparisons between mutex vs rwsem (xadd): (i) Same size, no extra footprint. (ii) Both have CONFIG_XXX_SPIN_ON_OWNER capabilities for exclusive lock ownership. (iii) Both can be slightly unfair wrt exclusive ownership, with writer lock stealing properties, not necessarily respecting FIFO order for granting the lock when contended. (iv) Mutexes can be slightly faster than rwsems when the lock is non-contended. (v) Both suck at performance for debug (slowpaths), which shouldn't matter anyway. Sharing the lock is obviously beneficial, and sem writer ownership is close enough to mutexes. The biggest winner of these changes is migration. As for concrete numbers, the following performance results are for a 4-socket 60-core IvyBridge-EX with 130Gb of RAM. Both alltests and disk (xfs+ramdisk) workloads of aim7 suite do quite well with this set, with a steady ~60% throughput (jpm) increase for alltests and up to ~30% for disk for high amounts of concurrency. Lower counts of workload users (< 100) does not show much difference at all, so at least no regressions. 3.18-rc1 3.18-rc1-i_mmap_rwsem alltests-100 17918.72 ( 0.00%) 28417.97 ( 58.59%) alltests-200 16529.39 ( 0.00%) 26807.92 ( 62.18%) alltests-300 16591.17 ( 0.00%) 26878.08 ( 62.00%) alltests-400 16490.37 ( 0.00%) 26664.63 ( 61.70%) alltests-500 16593.17 ( 0.00%) 26433.72 ( 59.30%) alltests-600 16508.56 ( 0.00%) 26409.20 ( 59.97%) alltests-700 16508.19 ( 0.00%) 26298.58 ( 59.31%) alltests-800 16437.58 ( 0.00%) 26433.02 ( 60.81%) alltests-900 16418.35 ( 0.00%) 26241.61 ( 59.83%) alltests-1000 16369.00 ( 0.00%) 26195.76 ( 60.03%) alltests-1100 16330.11 ( 0.00%) 26133.46 ( 60.03%) alltests-1200 16341.30 ( 0.00%) 26084.03 ( 59.62%) alltests-1300 16304.75 ( 0.00%) 26024.74 ( 59.61%) alltests-1400 16231.08 ( 0.00%) 25952.35 ( 59.89%) alltests-1500 16168.06 ( 0.00%) 25850.58 ( 59.89%) alltests-1600 16142.56 ( 0.00%) 25767.42 ( 59.62%) alltests-1700 16118.91 ( 0.00%) 25689.58 ( 59.38%) alltests-1800 16068.06 ( 0.00%) 25599.71 ( 59.32%) alltests-1900 16046.94 ( 0.00%) 25525.92 ( 59.07%) alltests-2000 16007.26 ( 0.00%) 25513.07 ( 59.38%) disk-100 7582.14 ( 0.00%) 7257.48 ( -4.28%) disk-200 6962.44 ( 0.00%) 7109.15 ( 2.11%) disk-300 6435.93 ( 0.00%) 6904.75 ( 7.28%) disk-400 6370.84 ( 0.00%) 6861.26 ( 7.70%) disk-500 6353.42 ( 0.00%) 6846.71 ( 7.76%) disk-600 6368.82 ( 0.00%) 6806.75 ( 6.88%) disk-700 6331.37 ( 0.00%) 6796.01 ( 7.34%) disk-800 6324.22 ( 0.00%) 6788.00 ( 7.33%) disk-900 6253.52 ( 0.00%) 6750.43 ( 7.95%) disk-1000 6242.53 ( 0.00%) 6855.11 ( 9.81%) disk-1100 6234.75 ( 0.00%) 6858.47 ( 10.00%) disk-1200 6312.76 ( 0.00%) 6845.13 ( 8.43%) disk-1300 6309.95 ( 0.00%) 6834.51 ( 8.31%) disk-1400 6171.76 ( 0.00%) 6787.09 ( 9.97%) disk-1500 6139.81 ( 0.00%) 6761.09 ( 10.12%) disk-1600 4807.12 ( 0.00%) 6725.33 ( 39.90%) disk-1700 4669.50 ( 0.00%) 5985.38 ( 28.18%) disk-1800 4663.51 ( 0.00%) 5972.99 ( 28.08%) disk-1900 4674.31 ( 0.00%) 5949.94 ( 27.29%) disk-2000 4668.36 ( 0.00%) 5834.93 ( 24.99%) In addition, a 67.5% increase in successfully migrated NUMA pages, thus improving node locality. The patch layout is simple but designed for bisection (in case reversion is needed if the changes break upstream) and easier review: o Patches 1-4 convert the i_mmap lock from mutex to rwsem. o Patches 5-10 share the lock in specific paths, each patch details the rationale behind why it should be safe. This patchset has been tested with: postgres 9.4 (with brand new hugetlb support), hugetlbfs test suite (all tests pass, in fact more tests pass with these changes than with an upstream kernel), ltp, aim7 benchmarks, memcached and iozone with the -B option for mmap'ing. *Untested* paths are nommu, memory-failure, uprobes and xip. This patch (of 8): Various parts of the kernel acquire and release this mutex, so add i_mmap_lock_write() and immap_unlock_write() helper functions that will encapsulate this logic. The next patch will make use of these. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: "Kirill A. Shutemov" <kirill@shutemov.name> Acked-by: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| b4b9829 | Xiubo Li | 13 December 2014, 00:54:14 UTC | MAINTAINERS: update Xiubo's email address My current email address will be gone shortly, update my email to be a gmail one. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Cc: Timur Tabi <timur@tabi.org> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| 88221c3 | Guenter Roeck | 13 December 2014, 00:54:12 UTC | rtc: snvs: fix build with CONFIG_PM_SLEEP disabled Commit 7654e9d4fd8f ("drivers/rtc/rtc-snvs: fix suspend/resume") replaces SIMPLE_DEV_PM_OPS with direct declaration of snvs_rtc_pm_ops, but does so outside #ifdef CONFIG_PM_SLEEP. This causes the driver build to fail if CONFIG_PM_SLEEP is not configured. Fixes: 7654e9d4fd8f ("drivers/rtc/rtc-snvs: fix suspend/resume") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:45 UTC |
| 6ce4436 | Linus Torvalds | 12 December 2014, 19:34:13 UTC | Merge tag 'please-pull-morepstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore update #2 from Tony Luck: "Couple of pstore-ram enhancements to allow use of different memory attributes" * tag 'please-pull-morepstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore-ram: Allow optional mapping with pgprot_noncached pstore-ram: Fix hangs by using write-combine mappings | 12 December 2014, 19:34:13 UTC |
| bdeb03c | Linus Torvalds | 12 December 2014, 19:15:23 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs update from Chris Mason: "From a feature point of view, most of the code here comes from Miao Xie and others at Fujitsu to implement scrubbing and replacing devices on raid56. This has been in development for a while, and it's a big improvement. Filipe and Josef have a great assortment of fixes, many of which solve problems corruptions either after a crash or in error conditions. I still have a round two from Filipe for next week that solves corruptions with discard and block group removal" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits) Btrfs: make get_caching_control unconditionally return the ctl Btrfs: fix unprotected deletion from pending_chunks list Btrfs: fix fs mapping extent map leak Btrfs: fix memory leak after block remove + trimming Btrfs: make btrfs_abort_transaction consider existence of new block groups Btrfs: fix race between writing free space cache and trimming Btrfs: fix race between fs trimming and block group remove/allocation Btrfs, replace: enable dev-replace for raid56 Btrfs: fix freeing used extents after removing empty block group Btrfs: fix crash caused by block group removal Btrfs: fix invalid block group rbtree access after bg is removed Btrfs, raid56: fix use-after-free problem in the final device replace procedure on raid56 Btrfs, replace: write raid56 parity into the replace target device Btrfs, replace: write dirty pages into the replace target device Btrfs, raid56: support parity scrub on raid56 Btrfs, raid56: use a variant to record the operation type Btrfs, scrub: repair the common data on RAID5/6 if it is corrupted Btrfs, raid56: don't change bbio and raid_map Btrfs: remove unnecessary code of stripe_index assignment in __btrfs_map_block Btrfs: remove noused bbio_ret in __btrfs_map_block in condition ... | 12 December 2014, 19:15:23 UTC |
| 0349678 | Linus Torvalds | 12 December 2014, 18:26:47 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - i2c-hid race condition fix from Jean-Baptiste Maneyrol - Logitech driver now supports vendor-specific HID++ protocol, allowing us to deliver a full multitouch support on wider range of Logitech touchpads. Written by Benjamin Tissoires - MS Surface Pro 3 Type Cover support added by Alan Wu - RMI touchpad support improvements from Andrew Duggan - a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng - various small fixes all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits) HID: rmi: The address of query8 must be calculated based on which query registers are present HID: rmi: Check for additional ACM registers appended to F11 data report HID: i2c-hid: prevent buffer overflow in early IRQ HID: logitech-hidpp: disable io in probe error path HID: logitech-hidpp: add boundary check for name retrieval HID: logitech-hidpp: check name retrieval return code HID: logitech-hidpp: do not return the name length HID: wacom: Report input events for each finger on generic devices HID: wacom: Initialize MT slots for generic devices at post_parse_hid HID: wacom: Update maximum X/Y accounding to outbound offset HID: wacom: Add support for DTU-1031X HID: wacom: add defines for new Cintiq and DTU outbound tracking HID: wacom: fix freeze on open when autosuspend is on HID: wacom: re-add accidentally dropped Lenovo PID HID: make hid_report_len as a static inline function in hid.h HID: wacom: Consult the application usage when determining field type HID: wacom: PAD is independent with pen/touch HID: multitouch: Add quirk for VTL touch panels HID: i2c-hid: fix race condition reading reports HID: wacom: Add angular resolution data to some ABS axes ... | 12 December 2014, 18:26:47 UTC |
| a7cb7bb | Linus Torvalds | 12 December 2014, 18:08:06 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ... | 12 December 2014, 18:08:06 UTC |
| ccb5a49 | Linus Torvalds | 12 December 2014, 17:57:22 UTC | Merge tag 'upstream-3.19-rc1' of git://git.infradead.org/linux-ubifs Pull UBI/UBIFS updates from Artem Bityutskiy: "This includes the following UBI/UBIFS changes: - UBI debug messages now include the UBI device number. This change is responsible for the big diffstat since it touched every debugging print statement. - An Xattr bug-fix which fixes SELinux support - Several error path fixes in UBI/UBIFS" * tag 'upstream-3.19-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix invalid vfree() UBI: Fix double free after do_sync_erase() UBIFS: fix a couple bugs in UBIFS xattr length calculation UBI: vtbl: Use ubi_eba_atomic_leb_change() UBI: Extend UBI layer debug/messaging capabilities UBIFS: fix budget leak in error path | 12 December 2014, 17:57:22 UTC |
| c05e14f | Linus Torvalds | 12 December 2014, 17:48:17 UTC | Merge tag 'xfs-for-linus-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs update from Dave Chinner: "There's relatively little change in this update; it is mainly bug fixes, cleanups and more of the on-going libxfs restructuring and on-disk format header consolidation work. Details: - more on-disk format header consolidation - move some structures shared with userspace to libxfs - new per-mount workqueue to fix for deadlocks between nested loop mounted filesystems - various bug fixes for ENOSPC, stats, quota off and preallocation - a bunch of compiler warning fixes for set-but-unused variables - various code cleanups" * tag 'xfs-for-linus-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (24 commits) xfs: split metadata and log buffer completion to separate workqueues xfs: fix set-but-unused warnings xfs: move type conversion functions to xfs_dir.h xfs: move ftype conversion functions to libxfs xfs: lobotomise xfs_trans_read_buf_map() xfs: active inodes stat is broken xfs: cleanup xfs_bmse_merge returns xfs: cleanup xfs_bmse_shift_one goto mess xfs: fix premature enospc on inode allocation xfs: overflow in xfs_iomap_eof_align_last_fsb xfs: fix simple_return.cocci warning in xfs_bmse_shift_one xfs: fix simple_return.cocci warning in xfs_file_readdir libxfs: fix simple_return.cocci warnings xfs: remove unnecessary null checks xfs: merge xfs_inum.h into xfs_format.h xfs: move most of xfs_sb.h to xfs_format.h xfs: merge xfs_ag.h into xfs_format.h xfs: move acl structures to xfs_format.h xfs: merge xfs_dinode.h into xfs_format.h xfs: catch invalid negative blknos in _xfs_buf_find() ... | 12 December 2014, 17:48:17 UTC |
| 9bfccec | Linus Torvalds | 12 December 2014, 17:28:03 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Lots of bugs fixes, including Zheng and Jan's extent status shrinker fixes, which should improve CPU utilization and potential soft lockups under heavy memory pressure, and Eric Whitney's bigalloc fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits) ext4: ext4_da_convert_inline_data_to_extent drop locked page after error ext4: fix suboptimal seek_{data,hole} extents traversial ext4: ext4_inline_data_fiemap should respect callers argument ext4: prevent fsreentrance deadlock for inline_data ext4: forbid journal_async_commit in data=ordered mode jbd2: remove unnecessary NULL check before iput() ext4: Remove an unnecessary check for NULL before iput() ext4: remove unneeded code in ext4_unlink ext4: don't count external journal blocks as overhead ext4: remove never taken branch from ext4_ext_shift_path_extents() ext4: create nojournal_checksum mount option ext4: update comments regarding ext4_delete_inode() ext4: cleanup GFP flags inside resize path ext4: introduce aging to extent status tree ext4: cleanup flag definitions for extent status tree ext4: limit number of scanned extents in status tree shrinker ext4: move handling of list of shrinkable inodes into extent status code ext4: change LRU to round-robin in extent status tree shrinker ext4: cache extent hole in extent status tree for ext4_da_map_blocks() ext4: fix block reservation for bigalloc filesystems ... | 12 December 2014, 17:28:03 UTC |
| 019e129 | Jiri Kosina | 12 December 2014, 10:15:33 UTC | Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', 'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus | 12 December 2014, 10:15:33 UTC |
| cabd9b5 | Andrew Duggan | 08 December 2014, 23:02:00 UTC | HID: rmi: The address of query8 must be calculated based on which query registers are present If a touchpad does not report relative data then query 6 will not be present and the address of query 8 will be one less. This patches calculates the location of query 8 instead of hardcoding the offset. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 12 December 2014, 10:14:55 UTC |
| 8414947 | Andrew Duggan | 08 December 2014, 23:01:59 UTC | HID: rmi: Check for additional ACM registers appended to F11 data report If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 12 December 2014, 10:14:46 UTC |
| 3ee420b | Jiri Kosina | 12 December 2014, 10:09:23 UTC | Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linus Conflicts: drivers/hid/hid-input.c | 12 December 2014, 10:09:23 UTC |
| d1c7e29 | Gwendal Grignou | 12 December 2014, 00:02:45 UTC | HID: i2c-hid: prevent buffer overflow in early IRQ Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE, 64 bytes. While processing the IRQ, we were asking to receive up to wMaxInputLength bytes, which can be bigger than 64 bytes. Later, when ->start is run, a proper bufsize will be calculated. Given wMaxInputLength is said to be unreliable in other part of the code, set to receive only what we can even if it results in truncated reports. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 12 December 2014, 08:36:20 UTC |
| 2756d37 | Linus Torvalds | 12 December 2014, 02:57:19 UTC | Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup update from Tejun Heo: "cpuset got simplified a bit. cgroup core got a fix on unified hierarchy and grew some effective css related interfaces which will be used for blkio support for writeback IO traffic which is currently being worked on" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: implement cgroup_get_e_css() cgroup: add cgroup_subsys->css_e_css_changed() cgroup: add cgroup_subsys->css_released() cgroup: fix the async css offline wait logic in cgroup_subtree_control_write() cgroup: restructure child_subsys_mask handling in cgroup_subtree_control_write() cgroup: separate out cgroup_calc_child_subsys_mask() from cgroup_refresh_child_subsys_mask() cpuset: lock vs unlock typo cpuset: simplify cpuset_node_allowed API cpuset: convert callback_mutex to a spinlock | 12 December 2014, 02:57:19 UTC |
| 4e8790f | Linus Torvalds | 12 December 2014, 02:52:37 UTC | Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "The only interesting piece is the support for shingled drives. The changes in libata layer are minimal. All it does is identifying the new class of device and report upwards accordingly" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Remove FIXME comment in atapi_request_sense() sata_rcar: Document deprecated "renesas,rcar-sata" sata_rcar: Add clocks to sata_rcar bindings ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option libata-scsi: Update SATL for ZAC drives libata: Implement ATA_DEV_ZAC libsas: use ata_dev_classify() | 12 December 2014, 02:52:37 UTC |
| 0a27044 | Linus Torvalds | 12 December 2014, 02:48:45 UTC | Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue update from Tejun Heo: "Work items which may be involved in memory reclaim path may be executed by the rescuer under memory pressure. When a rescuer gets activated, it processes whatever are on the pending list and then goes back to sleep until the manager kicks it again which involves 100ms delay. This is problematic for self-requeueing work items or the ones running on ordered workqueues as there always is only one work item on the pending list when the rescuer kicks in. The execution of that work item produces more to execute but the rescuer won't see them until after the said 100ms has passed, so such workqueues would only execute one work item every 100ms under prolonged memory pressure, which BTW may be being prolonged due to the slow execution. Neil wrote up a patch which fixes this issue by keeping the rescuer working as long as the target workqueue is busy but doesn't have enough workers" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: allow rescuer thread to do more work. workqueue: invert the order between pool->lock and wq_mayday_lock workqueue: cosmetic update in rescuer_thread() | 12 December 2014, 02:48:45 UTC |
| eedb3d3 | Linus Torvalds | 12 December 2014, 02:36:26 UTC | Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu updates from Tejun Heo: "Nothing interesting. A patch to convert the remaining __get_cpu_var() users, another to fix non-critical off-by-one in an assertion and a cosmetic conversion to lockless_dereference() in percpu-ref. The back-merge from mainline is to receive lockless_dereference()" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: Replace smp_read_barrier_depends() with lockless_dereference() percpu: Convert remaining __get_cpu_var uses in 3.18-rcX percpu: off by one in BUG_ON() | 12 December 2014, 02:36:26 UTC |
| 9d05096 | Linus Torvalds | 12 December 2014, 02:15:33 UTC | Merge tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen features and fixes from David Vrabel: - Fully support non-coherent devices on ARM by introducing the mechanisms to request the hypervisor to perform the required cache maintainance operations. - A number of pciback bug fixes and cleanups. Notably a deadlock fix if a PCI device was manually uunbound and a fix for incorrectly restoring state after a function reset. - In x86 PVHVM guests, use the APIC for interrupts if this has been virtualized by the hardware. This reduces the number of interrupt- related VM exits on such hardware. * tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (26 commits) Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" xen/pci: Use APIC directly when APIC virtualization hardware is available xen/pci: Defer initialization of MSI ops on HVM guests xen-pciback: drop SR-IOV VFs when PF driver unloads xen/pciback: Restore configuration space when detaching from a guest. PCI: Expose pci_load_saved_state for public consumption. xen/pciback: Remove tons of dereferences xen/pciback: Print out the domain owning the device. xen/pciback: Include the domain id if removing the device whilst still in use driver core: Provide an wrapper around the mutex to do lockdep warnings xen/pciback: Don't deadlock when unbinding. swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single swiotlb-xen: call xen_dma_sync_single_for_device when appropriate swiotlb-xen: remove BUG_ON in xen_bus_to_phys swiotlb-xen: pass dev_addr to xen_dma_unmap_page and xen_dma_sync_single_for_cpu xen/arm: introduce GNTTABOP_cache_flush xen/arm/arm64: introduce xen_arch_need_swiotlb xen/arm/arm64: merge xen/mm32.c into xen/mm.c xen/arm: use hypercall to flush caches in map_page xen: add a dma_addr_t dev_addr argument to xen_dma_map_page ... | 12 December 2014, 02:15:33 UTC |
| c0222ac | Linus Torvalds | 12 December 2014, 01:56:37 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ... | 12 December 2014, 01:56:37 UTC |
| 140cd7f | Linus Torvalds | 12 December 2014, 01:48:14 UTC | Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Some nice cleanups like removing bootmem, and removal of __get_cpu_var(). There is one patch to mm/gup.c. This is the generic GUP implementation, but is only used by us and arm(64). We have an ack from Steve Capper, and although we didn't get an ack from Andrew he told us to take the patch through the powerpc tree. There's one cxl patch. This is in drivers/misc, but Greg said he was happy for us to manage fixes for it. There is an infrastructure patch to support an IPMI driver for OPAL. There is also an RTC driver for OPAL. We weren't able to get any response from the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver. The usual batch of Freescale updates from Scott" * tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits) powerpc/powernv: Return to cpu offline loop when finished in KVM guest powerpc/book3s: Fix partial invalidation of TLBs in MCE code. powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault powerpc/xmon: Cleanup the breakpoint flags powerpc/xmon: Enable HW instruction breakpoint on POWER8 powerpc/mm/thp: Use tlbiel if possible powerpc/mm/thp: Remove code duplication powerpc/mm/hugetlb: Sanity check gigantic hugepage count powerpc/oprofile: Disable pagefaults during user stack read powerpc/mm: Check for matching hpte without taking hpte lock powerpc: Drop useless warning in eeh_init() powerpc/powernv: Cleanup unused MCE definitions/declarations. powerpc/eeh: Dump PHB diag-data early powerpc/eeh: Recover EEH error on ownership change for BCM5719 powerpc/eeh: Set EEH_PE_RESET on PE reset powerpc/eeh: Refactor eeh_reset_pe() powerpc: Remove more traces of bootmem powerpc/pseries: Initialise nvram_pstore_info's buf_lock cxl: Name interrupts in /proc/interrupt cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning ... | 12 December 2014, 01:48:14 UTC |
| 27afc5d | Linus Torvalds | 12 December 2014, 01:30:55 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The most notable change for this pull request is the ftrace rework from Heiko. It brings a small performance improvement and the ground work to support a new gcc option to replace the mcount blocks with a single nop. Two new s390 specific system calls are added to emulate user space mmio for PCI, an artifact of the how PCI memory is accessed. Two patches for the memory management with changes to common code. For KVM mm_forbids_zeropage is added which disables the empty zero page for an mm that is used by a KVM process. And an optimization, pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full. Some micro optimization for the cmpxchg and the spinlock code. And as usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/cputime: fix 31-bit compile s390/scm_block: make the number of reqs per HW req configurable s390/scm_block: handle multiple requests in one HW request s390/scm_block: allocate aidaw pages only when necessary s390/scm_block: use mempool to manage aidaw requests s390/eadm: change timeout value s390/mm: fix memory leak of ptlock in pmd_free_tlb s390: use local symbol names in entry[64].S s390/ptrace: always include vector registers in core files s390/simd: clear vector register pointer on fork/clone s390: translate cputime magic constants to macros s390/idle: convert open coded idle time seqcount s390/idle: add missing irq off lockdep annotation s390/debug: avoid function call for debug_sprintf_* s390/kprobes: fix instruction copy for out of line execution s390: remove diag 44 calls from cpu_relax() s390/dasd: retry partition detection s390/dasd: fix list corruption for sleep_on requests s390/dasd: fix infinite term I/O loop s390/dasd: remove unused code ... | 12 December 2014, 01:30:55 UTC |
| 70e71ca | Linus Torvalds | 11 December 2014, 22:27:06 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ... | 11 December 2014, 22:27:06 UTC |
| f486d9d | Peter Wu | 11 December 2014, 12:51:20 UTC | HID: logitech-hidpp: disable io in probe error path Balance a hid_device_io_start() call with hid_device_io_stop() in the error path. This avoids processing of HID reports when the probe fails which possibly leads to invalid memory access in hid_device_probe() as report_enum->report_id_hash might already be freed via hid_close_report(). hid_set_drvdata() is called before wtp_allocate, be consistent and clear drvdata too on the error path of wtp_allocate. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 11 December 2014, 22:10:01 UTC |
| 3a034a7 | Peter Wu | 11 December 2014, 12:51:19 UTC | HID: logitech-hidpp: add boundary check for name retrieval The HID response has a limited size. Do not trust the value returned by hardware, check that it really fits in the message. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 11 December 2014, 22:10:00 UTC |
| 1430ee7 | Peter Wu | 11 December 2014, 12:51:18 UTC | HID: logitech-hidpp: check name retrieval return code hidpp_devicenametype_get_device_name() may return a negative value on protocol errors (for example, when the device is powered off). Explicitly check this condition to avoid a long-running loop. (0 cannot be returned as __name_length - index > 0, but check for it anyway as it would otherwise result in an infinite loop.) Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 11 December 2014, 22:10:00 UTC |
| 02cc097 | Peter Wu | 11 December 2014, 12:51:17 UTC | HID: logitech-hidpp: do not return the name length We do not make any use of the actual name length get through hidpp_get_device_name(). Original patch by Benjamin Tissoires, this patch also replaces a (now) unnecessary goto by return NULL. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 11 December 2014, 22:10:00 UTC |
| 601a22f | Jason Gerecke | 11 December 2014, 00:26:04 UTC | HID: wacom: Report input events for each finger on generic devices The existing generic touch code only reports events after reading an entire HID report, which practically means that only data about the last contact in a report will ever be provided to userspace. This patch uses a trick from hid-multitouch.c to discover what type of field is at the end of each contact; when such a field is encountered all the stored contact data will be reported. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 11 December 2014, 22:01:56 UTC |
| 027bc8b | Tony Lindgren | 16 September 2014, 20:50:01 UTC | pstore-ram: Allow optional mapping with pgprot_noncached On some ARMs the memory can be mapped pgprot_noncached() and still be working for atomic operations. As pointed out by Colin Cross <ccross@android.com>, in some cases you do want to use pgprot_noncached() if the SoC supports it to see a debug printk just before a write hanging the system. On ARMs, the atomic operations on strongly ordered memory are implementation defined. So let's provide an optional kernel parameter for configuring pgprot_noncached(), and use pgprot_writecombine() by default. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 11 December 2014, 21:38:31 UTC |
| 7ae9cb8 | Rob Herring | 12 September 2014, 18:32:24 UTC | pstore-ram: Fix hangs by using write-combine mappings Currently trying to use pstore on at least ARMs can hang as we're mapping the peristent RAM with pgprot_noncached(). On ARMs, pgprot_noncached() will actually make the memory strongly ordered, and as the atomic operations pstore uses are implementation defined for strongly ordered memory, they may not work. So basically atomic operations have undefined behavior on ARM for device or strongly ordered memory types. Let's fix the issue by using write-combine variants for mappings. This corresponds to normal, non-cacheable memory on ARM. For many other architectures, this change does not change the mapping type as by default we have: #define pgprot_writecombine pgprot_noncached The reason why pgprot_noncached() was originaly used for pstore is because Colin Cross <ccross@android.com> had observed lost debug prints right before a device hanging write operation on some systems. For the platforms supporting pgprot_noncached(), we can add a an optional configuration option to support that. But let's get pstore working first before adding new features. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 11 December 2014, 21:35:49 UTC |
| bae41e4 | Linus Torvalds | 11 December 2014, 21:20:50 UTC | Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became a fairly large pull request. In addition to the usual driver updates / fixes, there have been a high amount of cleanups in ASoC area, as well as control API helpers and kernel documentations fixes touching through the whole tree. In the driver side, the biggest changes are the support for new Intel SoC found on new x86 machines, and the updates of FireWire dice and oxfw drivers. Some remarkable items are below: ALSA core: - PCM mmap code cleanup, removal of arch-dependent codes - PCM xrun injection support - PCM hwptr tracepoint support - Refactoring of snd_pcm_action(), simplification of PCM locking - Robustified sequecner auto-load functionality - New control API helpers and lots of cleanups along with them - Lots of kerneldoc fixes and cleanups USB-audio: - The mixer resume code was largely rewritten, and the devices with quirks are resumed properly. - New hardware support: Focusrite Scarlett, Digidesign Mbox1, Denon/Marantz DACs, Zoom R16/24 FireWire: - DICE driver updates with better duplex and sync support, including MIDI support - New OXFW driver for Oxford Semiconductor FW970/971 chipset, including the previous LaCie Speakers device. Fullduplex and MIDI support included as well as DICE driver. HD-audio: - Refactoring the driver-caps quirk handling in snd-hda-intel - More consistent control names representing the topology better - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic fix, ASUS Z99He laptop EAPD ASoC: - Conversion of AC'97 drivers to use regmap, bringing us closer to the removal of the ASoC level I/O code - Clean up a lot of old drivers that were open coding things that have subsequently been implemented in the core - Some DAPM performance improvements - Removal of the now seldom used CODEC mutex - Lots of updates for the newer Intel SoC support, including support for the DSP and some Cherrytrail and Braswell machine drivers - Support for Samsung boards using rt5631 as the CODEC - Removal of the obsolete AFEB9260 machine driver - Driver support for the TI TS3A227E headset driver used in some Chrombeooks Others: - ASIHPI driver update and cleanups - Lots of dev_*() printk conversions - Lots of trivial cleanups for the codes spotted by Coccinelle" * tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits) ALSA: pcxhr: NULL dereference on probe failure ALSA: lola: NULL dereference on probe failure ALSA: hda - Add "eapd" model string for AD1986A codec ALSA: hda - Add EAPD fixup for ASUS Z99He laptop ALSA: oxfw: Add hwdep interface ALSA: oxfw: Add support for capture/playback MIDI messages ALSA: oxfw: add support for capturing PCM samples ALSA: oxfw: Add support AMDTP in-stream ALSA: oxfw: Add support for Behringer/Mackie devices ALSA: oxfw: Change the way to start stream ALSA: oxfw: Add proc interface for debugging purpose ALSA: oxfw: Change the way to make PCM rules/constraints ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation ALSA: oxfw: Change the way to name card ALSA: dice: Add support for MIDI capture/playback ALSA: dice: Add support for capturing PCM samples ALSA: dice: Support for non SYT-Match sampling clock source mode ALSA: dice: Add support for duplex streams with synchronization ALSA: dice: Change the way to start stream ALSA: jack: Add dummy snd_jack_set_key() definition ... | 11 December 2014, 21:20:50 UTC |
| 7ef58b3 | Linus Torvalds | 11 December 2014, 21:06:58 UTC | Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Lots of activity in the devicetree code for v3.18. Most of it is related to getting all of the overlay support code in place, but there are other important things in there. Highlights: - OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those subsystems can now respond to live changes to the device tree. - CONFIG_OF_OVERLAY method for applying live changes to the device tree - Removal of the of_allnodes list. This used to be used to iterate over all the nodes in the device tree, but it is unnecessary because the same thing can be done by iterating over the list of child pointers. Getting rid of of_allnodes saves some memory and avoids the possibility of of_allnodes being sorted differently from the child lists. - Support for retrieving original DTB blob via sysfs. Needed by kexec. - More unittests - Documentation and minor bug fixes" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits) of: Delete unnecessary check before calling "of_node_put()" of: Drop ->next pointer from struct device_node spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y of: support passing console options with stdout-path of: add optional options parameter to of_find_node_by_path() of: Add bindings for chosen node, stdout-path of: Remove unneeded and incorrect MODULE_DEVICE_TABLE ARM: dt: fix up PL011 device tree bindings of: base, fix of_property_read_string_helper kernel-doc of: remove select of non-existant OF_DEVICE config symbol spi/of: Add OF notifier handler spi/of: Create new device registration method and accessors i2c/of: Add OF_RECONFIG notifier handler i2c/of: Factor out Devicetree registration code of/overlay: Add overlay unittests of/overlay: Introduce DT overlay support of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type of/reconfig: Always use the same structure for notifiers of/reconfig: Add debug output for OF_RECONFIG notifiers of/reconfig: Add empty stubs for the of_reconfig methods ... | 11 December 2014, 21:06:58 UTC |
| 413fd0e | Linus Torvalds | 11 December 2014, 20:46:32 UTC | Merge tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - support for mx6sl and mx6sx - OMAP HDMI audio rewrite to make it finally work - OMAP video PLL work to prepare for new DRA7xx SoCs - simplefb DT related improvements * tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (81 commits) video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put" video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release" video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path" video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister" video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter" video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put" video: smscufx: Deletion of unnecessary checks before the function call "vfree" video: udlfb: Deletion of unnecessary checks before the function call "vfree" video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free" video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree" video: fbdev: arkfb: suppress build warning video: fbdev: s3fb: suppress build warning video: fbdev: vt8623fb: suppress build warning OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output() OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback OMAPDSS: Remove all references to obsolete HDMI audio callbacks ASoC: omap: Remove obsolete HDMI audio code and Kconfig options OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver ... | 11 December 2014, 20:46:32 UTC |
| 6b9e2ce | Linus Torvalds | 11 December 2014, 20:20:31 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ... | 11 December 2014, 20:20:31 UTC |
| 14ba9a2 | Linus Torvalds | 11 December 2014, 20:09:37 UTC | Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox framework updates from Jassi Brar. * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: Mailbox: Add support for Platform Communication Channel mailbox/omap: adapt to the new mailbox framework mailbox: add tx_prepare client callback mailbox: Don't unnecessarily re-arm the polling timer | 11 December 2014, 20:09:37 UTC |
| b859e7d | Linus Torvalds | 11 December 2014, 20:03:34 UTC | Merge tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Not a huge amount going on this release, mainly new drivers (there's a couple more waiting that didn't quite make the cut for this release too): - An interface for querying if the current transfer is the last in a message, allowing controllers that need special handling for the final transfer to use the core message parsing. - Support for Amlogic Meson SPIFC, Imagination Technologies SFPI, Intel Quark X1000 and Samsung Exynos 7 controllers" * tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (38 commits) spi/s3c64xx: Remove redundant runtime PM management spi: fsl-spi: remove unused variable assignment spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg() spi: core: Do not mangle error code from kthread_run() spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use spi: fsl-(e)spi: migrate to generic master queueing spi/txx9: Deletion of an unnecessary check before the function call "clk_disable" spi: cadence: Fix 3-to-8 mux mode spi: cadence: Init HW after reading devicetree attributes spi: meson: Select REGMAP_MMIO spi: s3c64xx: add support for exynos7 SPI controller spi: spi-pxa2xx: SPI support for Intel Quark X1000 spi: meson: meson_spifc_setup_speed() can be static spi: spi-pxa2xx: Add helpers for regiseters' accessing spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list spi: atmel: introduce probe deferring spi: atmel: remove compat for non DT board when requesting dma chan spi: meson: Add support for Amlogic Meson SPIFC spi: meson: Add device tree bindings documentation for SPIFC spi: core: Add spi_transfer_is_last() helper ... | 11 December 2014, 20:03:34 UTC |
| 709d9f0 | Linus Torvalds | 11 December 2014, 19:58:50 UTC | Merge tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: - Broadwell-DE support on sb-edac driver - Some fixes at sb-edac driver * tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Fix typo computing number of banks sb_edac: Add support for Broadwell-DE processor sb_edac: Fix discovery of top-of-low-memory for Haswell sb_edac: Fix erroneous bytes->gigabytes conversion sb_edac: Fix off-by-one error in number of channels | 11 December 2014, 19:58:50 UTC |
| 00c83b0 | Marcelo Leitner | 11 December 2014, 12:02:22 UTC | Fix race condition between vxlan_sock_add and vxlan_sock_release Currently, when trying to reuse a socket, vxlan_sock_add will grab vn->sock_lock, locate a reusable socket, inc refcount and release vn->sock_lock. But vxlan_sock_release() will first decrement refcount, and then grab that lock. refcnt operations are atomic but as currently we have deferred works which hold vs->refcnt each, this might happen, leading to a use after free (specially after vxlan_igmp_leave): CPU 1 CPU 2 deferred work vxlan_sock_add ... ... spin_lock(&vn->sock_lock) vs = vxlan_find_sock(); vxlan_sock_release dec vs->refcnt, reaches 0 spin_lock(&vn->sock_lock) vxlan_sock_hold(vs), refcnt=1 spin_unlock(&vn->sock_lock) hlist_del_rcu(&vs->hlist); vxlan_notify_del_rx_port(vs) spin_unlock(&vn->sock_lock) So when we look for a reusable socket, we check if it wasn't freed already before reusing it. Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 7c47cedf43a8b3 ("vxlan: move IGMP join/leave to work queue") Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:57:08 UTC |
| 51f8301 | Cyrille Pitchen | 11 December 2014, 10:15:54 UTC | net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:51:59 UTC |
| 2183a58 | Linus Torvalds | 11 December 2014, 19:49:23 UTC | Merge tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ... | 11 December 2014, 19:49:23 UTC |
| efef793 | David S. Miller | 11 December 2014, 19:47:40 UTC | Merge branch 'mlx4-next' Or Gerlitz says: ==================== mlx4 driver update This series from Matan, Jenny, Dotan and myself is mostly about adding support to a new performance optimized flow steering mode (patches 4-10). The 1st two patches are small fixes (one for VXLAN and one for SRIOV), and the third patch is a fix to avoid hard-lockup situation when many (hunderds) processes holding user-space QPs/CQs get events. Matan and Or. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:40 UTC |
| 7d077cd | Matan Barak | 11 December 2014, 08:58:00 UTC | net/mlx4: Add support for A0 steering Add the required firmware commands for A0 steering and a way to enable that. The firmware support focuses on INIT_HCA, QUERY_HCA, QUERY_PORT, QUERY_DEV_CAP and QUERY_FUNC_CAP commands. Those commands are used to configure and query the device. The different A0 DMFS (steering) modes are: Static - optimized performance, but flow steering rules are limited. This mode should be choosed explicitly by the user in order to be used. Dynamic - this mode should be explicitly choosed by the user. In this mode, the FW works in optimized steering mode as long as it can and afterwards automatically drops to classic (full) DMFS. Disable - this mode should be explicitly choosed by the user. The user instructs the system not to use optimized steering, even if the FW supports Dynamic A0 DMFS (and thus will be able to use optimized steering in Default A0 DMFS mode). Default - this mode is implicitly choosed. In this mode, if the FW supports Dynamic A0 DMFS, it'll work in this mode. Otherwise, it'll work at Disable A0 DMFS mode. Under SRIOV configuration, when the A0 steering mode is enabled, older guest VF drivers who aren't using the RX QP allocation flag (MLX4_RESERVE_A0_QP) will get a QP from the general range and fail when attempting to register a steering rule. To avoid that, the PF context behaviour is changed once on A0 static mode, to require support for the allocation flag in VF drivers too. In order to enable A0 steering, we use log_num_mgm_entry_size param. If the value of the parameter is not positive, we treat the absolute value of log_num_mgm_entry_size as a bit field. Setting bit 2 of this bit field enables static A0 steering. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:36 UTC |
| 431df8c | Matan Barak | 11 December 2014, 08:57:59 UTC | net/mlx4: Refactor QUERY_PORT Currently QUERY_PORT is done as a part of QUERY_DEV_CAP firmware command. Since we would like to use it without querying all device capabilities, extract this part to be a function of its own. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| 579d059 | Matan Barak | 11 December 2014, 08:57:58 UTC | net/mlx4_core: Add explicit error message when rule doesn't meet configuration When a given flow steering rule is invalid in respect to the current steering configuration, print the correct error message to the system log. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| d57febe | Matan Barak | 11 December 2014, 08:57:57 UTC | net/mlx4: Add A0 hybrid steering A0 hybrid steering is a form of high performance flow steering. By using this mode, mlx4 cards use a fast limited table based steering, in order to enable fast steering of unicast packets to a QP. In order to implement A0 hybrid steering we allocate resources from different zones: (1) General range (2) Special MAC-assigned QPs [RSS, Raw-Ethernet] each has its own region. When we create a rss QP or a raw ethernet (A0 steerable and BF ready) QP, we try hard to allocate the QP from range (2). Otherwise, we try hard not to allocate from this range. However, when the system is pushed to its limits and one needs every resource, the allocator uses every region it can. Meaning, when we run out of raw-eth qps, the allocator allocates from the general range (and the special-A0 area is no longer active). If we run out of RSS qps, the mechanism tries to allocate from the raw-eth QP zone. If that is also exhausted, the allocator will allocate from the general range (and the A0 region is no longer active). Note that if a raw-eth qp is allocated from the general range, it attempts to allocate the range such that bits 6 and 7 (blueflame bits) in the QP number are not set. When the feature is used in SRIOV, the VF has to notify the PF what kind of QP attributes it needs. In order to do that, along with the "Eth QP blueflame" bit, we reserve a new "A0 steerable QP". According to the combination of these bits, the PF tries to allocate a suitable QP. In order to maintain backward compatibility (with older PFs), the PF notifies which QP attributes it supports via QUERY_FUNC_CAP command. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| 7a89399 | Matan Barak | 11 December 2014, 08:57:56 UTC | net/mlx4: Add mlx4_bitmap zone allocator The zone allocator is a mechanism which manages a few mlx4_bitmaps. When allocating a resource, the user indicates the desired zone of which this resource will be allocated from. If possible, the resource will be allocated from this zone. Otherwise, the resource will be allocated from a less-than, equal-to, higher-than priority zone, according to the desired zone's properties with that respective allocation order. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| ab256e5 | Dotan Barak | 11 December 2014, 08:57:55 UTC | net/mlx4: Add a check if there are too many reserved QPs The number of reserved QPs is affected both from the firmware and from the driver's requirements. This patch adds a check that validates that this number is indeed feasable. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| ddae034 | Eugenia Emantayev | 11 December 2014, 08:57:54 UTC | net/mlx4: Change QP allocation scheme When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:35 UTC |
| 3dca0f4 | Matan Barak | 11 December 2014, 08:57:53 UTC | net/mlx4_core: Use tasklet for user-space CQ completion events Previously, we've fired all our completion callbacks straight from our ISR. Some of those callbacks were lightweight (for example, mlx4_en's and IPoIB napi callbacks), but some of them did more work (for example, the user-space RDMA stack uverbs' completion handler). Besides that, doing more than the minimal work in ISR is generally considered wrong, it could even lead to a hard lockup of the system. Since when a lot of completion events are generated by the hardware, the loop over those events could be so long, that we'll get into a hard lockup by the system watchdog. In order to avoid that, add a new way of invoking completion events callbacks. In the interrupt itself, we add the CQs which receive completion event to a per-EQ list and schedule a tasklet. In the tasklet context we loop over all the CQs in the list and invoke the user callback. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:34 UTC |
| 383677d | Or Gerlitz | 11 December 2014, 08:57:52 UTC | net/mlx4_core: Mask out host side virtualization features for guests When VFs (guests in this context) issue the QUERY_DEV_CAP command, they need not be told that host side virtualization features such as VST, FSM (MAC anti-spoofing) and running > 80 VFs are supported by the device. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:34 UTC |
| c58942f | Or Gerlitz | 11 December 2014, 08:57:51 UTC | net/mlx4_en: Set csum level for encapsulated packets This was dropped by mistake for the napi_gro_frags flow, fix that. Fixes: dd65beac48a5 ('net/mlx4_en: Extend usage of napi_gro_frags') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:47:34 UTC |
| e28870f | Linus Torvalds | 11 December 2014, 19:39:03 UTC | Merge tag 'backlight-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Clean-up leaky resources; pwm_bl - Simplify Device Tree initialisation; lp855x_bl - Add Regulator support; lp855x - Remove Bryan from the Maintainer list -- new baby, no time :) * tag 'backlight-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: MAINTAINERS: Remove my name from Backlight subsystem backlight: lp855x: Add supply regulator to lp855x backlight: lp855x: Refactor DT parsing code backlight: pwm: Clean-up pwm requested using legacy API | 11 December 2014, 19:39:03 UTC |
| 630f4b7 | Sriharsha Basavapatna | 11 December 2014, 08:24:47 UTC | be2net: Export tunnel offloads only when a VxLAN tunnel is created The encapsulated offload flags shouldn't be unconditionally exported to the stack. The stack expects offloading to work across all tunnel types when those flags are set. This would break other tunnels (like GRE) since be2net currently supports tunnel offload for VxLAN only. Also, with VxLANs Skyhawk-R can offload only 1 UDP dport. If more than 1 UDP port is added, we should disable offloads in that case too. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:37:24 UTC |
| 0a4b5a2 | Kevin Hao | 11 December 2014, 06:08:41 UTC | gianfar: Fix dma check map error when DMA_API_DEBUG is enabled We need to use dma_mapping_error() to check the dma address returned by dma_map_single/page(). Otherwise we would get warning like this: WARNING: at lib/dma-debug.c:1140 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc2-next-20141029 #196 task: c0834300 ti: effe6000 task.ti: c0874000 NIP: c02b2c98 LR: c02b2c98 CTR: c030abc4 REGS: effe7d70 TRAP: 0700 Not tainted (3.18.0-rc2-next-20141029) MSR: 00021000 <CE,ME> CR: 22044022 XER: 20000000 GPR00: c02b2c98 effe7e20 c0834300 00000098 00021000 00000000 c030b898 00000003 GPR08: 00000001 00000000 00000001 749eec9d 22044022 1001abe0 00000020 ef278678 GPR16: ef278670 ef278668 ef278660 070a8040 c087f99c c08cdc60 00029000 c0840d44 GPR24: c08be6e8 c0840000 effe7e78 ef041340 00000600 ef114e10 00000000 c08be6e0 NIP [c02b2c98] check_unmap+0x51c/0x9e4 LR [c02b2c98] check_unmap+0x51c/0x9e4 Call Trace: [effe7e20] [c02b2c98] check_unmap+0x51c/0x9e4 (unreliable) [effe7e70] [c02b31d8] debug_dma_unmap_page+0x78/0x8c [effe7ed0] [c03d1640] gfar_clean_rx_ring+0x208/0x488 [effe7f40] [c03d1a9c] gfar_poll_rx_sq+0x3c/0xa8 [effe7f60] [c04f8714] net_rx_action+0xc0/0x178 [effe7f90] [c00435a0] __do_softirq+0x100/0x1fc [effe7fe0] [c0043958] irq_exit+0xa4/0xc8 [effe7ff0] [c000d14c] call_do_irq+0x24/0x3c [c0875e90] [c00048a0] do_IRQ+0x8c/0xf8 [c0875eb0] [c000ed10] ret_from_except+0x0/0x18 For TX, we need to unmap the pages which has already been mapped and free the skb before return. For RX, move the dma mapping and error check to gfar_new_skb(). We would reuse the original skb in the rx ring when either allocating skb failure or dma mapping error. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:27:14 UTC |
| 666224d | Hariprasad Shenai | 11 December 2014, 05:41:43 UTC | cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call Remove use of calls into t4_fw_hello() with MASTER_MUST, which results in FW_HELLO_CMD_MASTERFORCE being set. The firmware doesn't support this and of course any existing PF Drivers will totally go for a toss. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 19:25:17 UTC |
| c1b30e4 | Linus Torvalds | 11 December 2014, 18:43:14 UTC | Merge tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "Here is a stash of pin control changes I have collected for the v3.19 series. Mainly new hardware support, with Intels new embedded SoC as the especially interesting thing standing out, fully using the subsystem. - Force conversion of the ux500 pin control device trees and parsers to use the generic pin control bindings. - New driver and device tree bindings for the Qualcomm PMIC MPP pin controller and GPIO. - Some ACPI infrastructure for pin controllers. - New driver for the Intel CherryView/Braswell pin controller, the first Intel pin controller to fully take advantage of the pin control subsystem. - Support the Freescale i.MX VF610 variant. - Support the sunxi A80 variant. - Support the Samsung Exynos 4415 and Exynos 7 variants. - Split out Intel pin controllers to their own subdirectory. - A large slew of rockchip pin control updates, including suspend/resume support. - A large slew of Samsung Exynos pin controller updates. - Various minor updates and fixes" * tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits) pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show pinctrl: meson: add device tree bindings documentation gpio: tz1090: Fix error handling of irq_of_parse_and_map pinctrl: tz1090-pinctrl.txt: Fix typo in binding pinctrl: pinconf-generic: Declare dt_params/conf_items const pinctrl: exynos: Add support for Exynos4415 pinctrl: exynos: Add initial driver data for Exynos7 pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts pinctrl: exynos: Consolidate irq domain callbacks pinctrl: exynos: Generalize the eint16_31 demux code pinctrl: samsung: Separate per-bank init and runtime data pinctrl: samsung: Constify samsung_pin_ctrl struct pinctrl: samsung: Constify samsung_pin_bank_type struct pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR() pinctrl: Add Intel Cherryview/Braswell pin controller support gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod() pinctrl: Fix path error in documentation pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume pinctrl: rockchip: add suspend/resume functions ... | 11 December 2014, 18:43:14 UTC |
| 92a578b | Linus Torvalds | 11 December 2014, 05:17:00 UTC | Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ... | 11 December 2014, 05:17:00 UTC |
| c75059c | Linus Torvalds | 11 December 2014, 04:58:52 UTC | Merge tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Here are the PCI changes intended for v3.19. I don't think there's anything very exciting here, but there was a lot of MSI-related stuff coming via Thomas. Details: NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert)" * tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits) PCI: Remove fixed parameter in pci_iov_resource_bar() PCI: Add informational printk for invalid BARs PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM PCI: spear: Remove unnecessary OOM message PCI: mvebu: Add a blank line after declarations PCI: designware: Add a blank line after declarations PCI: exynos: Remove unnecessary return statement PCI: imx6: Use tabs for indentation PCI: keystone: Remove unnecessary OOM message PCI: Remove unused and broken to_hotplug_slot() PCI: Make FLR and AF FLR reset warning messages different PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() PCI: layerscape: Add Freescale Layerscape PCIe driver PCI: Simplify if-return sequences PCI: Delete unnecessary NULL pointer checks PCI: Shrink decoding-disabled window while sizing BARs ... | 11 December 2014, 04:58:52 UTC |
| f74ea36 | Linus Torvalds | 11 December 2014, 04:40:51 UTC | Merge tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest changes from Steven Rostedt: "The following ktest updates were done: - Fix handling the make kernelrelease change - Fix make_min_config that was broken by new bisect_config changes - Allow tests to undefine default options (not just being able to override them) - Print name of test (if defined) to start of test output" * tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add back "tail -1" to kernelrelease make ktest: Add name to running title ktest: Allow tests to undefine default options ktest: Fix make_min_config to handle new assign_configs call ktest: Use make -s kernelrelease | 11 December 2014, 04:40:51 UTC |
| 52c9b12 | David S. Miller | 11 December 2014, 04:37:06 UTC | Merge branch 'fec-next' Fugang Duan says: ==================== net: fec: driver code clean and bug fix The patch serial include code clean and bug fix: Patch#1: avoid dummy operation during suspend/resume test. Patch#2: bug fix for i.MX6SX SOC that clean all interrupt events during MAC initial process. Patch#3: before phy device link status is up, only enable MDIO bus interrupt. V2: - Modify the comment form from David's suggestion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 04:37:06 UTC |
| 0c5a3ae | Nimrod Andy | 11 December 2014, 01:20:33 UTC | net: fec: only enable mdio interrupt before phy device link up Before phy device link up, we only enable FEC mdio interrupt, which is more reasonable. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 04:37:01 UTC |
| e17f7fe | Nimrod Andy | 11 December 2014, 01:20:32 UTC | net: fec: clear all interrupt events to support i.MX6SX For i.MX6SX FEC controller, there have interrupt mask and event field extension. To support all SOCs FEC, we clear all interrupt events during MAVC initial process. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 04:37:01 UTC |
| 858eeb7 | Nimrod Andy | 11 December 2014, 01:20:31 UTC | net: fec: reset fep link status in suspend function On some i.MX6 serial boards, phy power and refrence clock are supplied or controlled by SOC. When do suspend/resume test, the power and clock are disabled, so phy device link down. For current driver, fep->link is still up status, which cause extra operation like below code. To avoid the dumy operation, we set fep->link to down when phy device is real down. ... if (fep->link) { napi_disable(&fep->napi); netif_tx_lock_bh(ndev); fec_stop(ndev); netif_tx_unlock_bh(ndev); napi_enable(&fep->napi); fep->link = phy_dev->link; status_change = 1; } ... Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 04:37:01 UTC |
| 350e4f4 | Linus Torvalds | 11 December 2014, 04:35:41 UTC | Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq | 11 December 2014, 04:35:41 UTC |
| 198bf1b | Alexei Starovoitov | 11 December 2014, 04:14:55 UTC | net: sock: fix access via invalid file descriptor 0day robot reported the following crash: [ 21.233581] BUG: unable to handle kernel NULL pointer dereference at 0000000000000007 [ 21.234709] IP: [<ffffffff8156ebda>] sk_attach_bpf+0x39/0xc2 It's due to bpf_prog_get() returning ERR_PTR. Check it properly. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 04:34:27 UTC |
| c328095 | Linus Torvalds | 11 December 2014, 04:03:45 UTC | Merge tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace self-test updates from Steven Rostedt: "Updates for the ftrace self tests: - Added kprobes on ftrace testcase - Sort test cases - Add file to hold helper functions - Use logfile name supported by busybox's mktemp - Clear trace buffer after running kprobe test - Fix show descriptions when run on dash shell - Add --verbose option for showing echo output" * tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Add --verbose option for showing echo output ftracetest: Fix to show descriptions on dash ftracetest: Add basic event tracing test cases ftracetest: Clear trace buffer after running kprobe testcases ftracetest: Use logfile name supported by busybox's mktemp ftracetest: Add a couple of ftrace test cases ftracetest: Add functions file that holds helper functions ftracetest: Sort testcases ftracetest: Add kprobes on ftrace testcase | 11 December 2014, 04:03:45 UTC |
| 1dd7dcb | Linus Torvalds | 11 December 2014, 03:58:13 UTC | Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "There was a lot of clean ups and minor fixes. One of those clean ups was to the trace_seq code. It also removed the return values to the trace_seq_*() functions and use trace_seq_has_overflowed() to see if the buffer filled up or not. This is similar to work being done to the seq_file code as well in another tree. Some of the other goodies include: - Added some "!" (NOT) logic to the tracing filter. - Fixed the frame pointer logic to the x86_64 mcount trampolines - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems. That is, the ftrace trampoline can be dynamically allocated and be called directly by functions that only have a single hook to them" * tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits) tracing: Truncated output is better than nothing tracing: Add additional marks to signal very large time deltas Documentation: describe trace_buf_size parameter more accurately tracing: Allow NOT to filter AND and OR clauses tracing: Add NOT to filtering logic ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter ftrace/x86: Get rid of ftrace_caller_setup ftrace/x86: Have save_mcount_regs macro also save stack frames if needed ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs ftrace/x86: Simplify save_mcount_regs on getting RIP ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file ftrace/x86: Have static tracing also use ftrace_caller_setup ftrace/x86: Have static function tracing always test for function graph kprobes: Add IPMODIFY flag to kprobe_ftrace_ops ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict kprobes/ftrace: Recover original IP if pre_handler doesn't change it tracing/trivial: Fix typos and make an int into a bool tracing: Deletion of an unnecessary check before iput() ... | 11 December 2014, 03:58:13 UTC |
| f95b414 | Gu Zheng | 11 December 2014, 03:22:04 UTC | net: introduce helper macro for_each_cmsghdr Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating cmsghdr from msghdr, just cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 December 2014, 03:41:55 UTC |
| b6da007 | Linus Torvalds | 11 December 2014, 02:34:42 UTC | Merge branch 'akpm' (patchbomb from Andrew) Merge first patchbomb from Andrew Morton: - a few minor cifs fixes - dma-debug upadtes - ocfs2 - slab - about half of MM - procfs - kernel/exit.c - panic.c tweaks - printk upates - lib/ updates - checkpatch updates - fs/binfmt updates - the drivers/rtc tree - nilfs - kmod fixes - more kernel/exit.c - various other misc tweaks and fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) exit: pidns: fix/update the comments in zap_pid_ns_processes() exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting exit: exit_notify: re-use "dead" list to autoreap current exit: reparent: call forget_original_parent() under tasklist_lock exit: reparent: avoid find_new_reaper() if no children exit: reparent: introduce find_alive_thread() exit: reparent: introduce find_child_reaper() exit: reparent: document the ->has_child_subreaper checks exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting exit: proc: don't try to flush /proc/tgid/task/tgid exit: release_task: fix the comment about group leader accounting exit: wait: drop tasklist_lock before psig->c* accounting exit: wait: don't use zombie->real_parent exit: wait: cleanup the ptrace_reparented() checks usermodehelper: kill the kmod_thread_locker logic usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races ... | 11 December 2014, 02:34:42 UTC |
| a53b831 | Oleg Nesterov | 10 December 2014, 23:55:28 UTC | exit: pidns: fix/update the comments in zap_pid_ns_processes() The comments in zap_pid_ns_processes() are not clear, we need to explain how this code actually works. 1. "Ignore SIGCHLD" looks like optimization but it is not, we also need this for correctness. 2. The comment above sys_wait4() could tell more. EXIT_ZOMBIE child is only possible if it has exited before we ignored SIGCHLD. Or if it is traced from the parent namespace, but in this case it will be reaped by debugger after detach, sys_wait4() acts as a synchronization point. 3. The comment about TASK_DEAD (EXIT_DEAD in fact) children is outdated. Contrary to what it says we do not need to make sure they all go away after 0a01f2cc390e "pidns: Make the pidns proc mount/umount logic obvious". At the same time, we do need to wait for nr_hashed==init_pids, but the reasons are quite different and not obvious: setns(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:18 UTC |
| 24c037e | Oleg Nesterov | 10 December 2014, 23:55:25 UTC | exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it fails because disable_pid_allocation() was called by the exiting child_reaper. We could simply move get_pid_ns() down to successful return, but this fix tries to be as trivial as possible. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Sterling Alexander <stalexan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:18 UTC |
| 6c66e7d | Oleg Nesterov | 10 December 2014, 23:55:23 UTC | exit: exit_notify: re-use "dead" list to autoreap current After the previous change we can add just the exiting EXIT_DEAD task to the "dead" list and remove another release_task(tsk). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:18 UTC |
| 482a376 | Oleg Nesterov | 10 December 2014, 23:55:20 UTC | exit: reparent: call forget_original_parent() under tasklist_lock Shift "release dead children" loop from forget_original_parent() to its caller, exit_notify(). It is safe to reap them even if our parent reaps us right after we drop tasklist_lock, those children no longer have any connection to the exiting task. And this allows us to avoid write_lock_irq(tasklist_lock) right after it was released by forget_original_parent(), we can simply call it with tasklist_lock held. While at it, move the comment about forget_original_parent() up to this function. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:18 UTC |
| ad9e206 | Oleg Nesterov | 10 December 2014, 23:55:17 UTC | exit: reparent: avoid find_new_reaper() if no children Now that pid_ns logic was isolated we can change forget_original_parent() to return right after find_child_reaper() when father->children is empty, there is nothing to reparent in this case. In particular this avoids find_alive_thread() and this can help if the whole process exits and it has a lot of PF_EXITING threads at the start of the thread list, this can easily lead to O(nr_threads ** 2) iterations. Trivial test case (tested under KVM, 2 CPUs): static void *tfunc(void *arg) { pause(); return NULL; } static int child(unsigned int nt) { pthread_t pt; while (nt--) assert(pthread_create(&pt, NULL, tfunc, NULL) == 0); pthread_kill(pt, SIGTRAP); pause(); return 0; } int main(int argc, const char *argv[]) { int stat; unsigned int nf = atoi(argv[1]); unsigned int nt = atoi(argv[2]); while (nf--) { if (!fork()) return child(nt); wait(&stat); assert(stat == SIGTRAP); } return 0; } $ time ./test 16 16536 shows: real user sys - 5m37.628s 0m4.437s 8m5.560s + 0m50.032s 0m7.130s 1m4.927s Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:18 UTC |
| c9dc05b | Oleg Nesterov | 10 December 2014, 23:55:14 UTC | exit: reparent: introduce find_alive_thread() Add the new simple helper to factor out the for_each_thread() code in find_child_reaper() and find_new_reaper(). It can also simplify the potential PF_EXITING -> exit_state change, plus perhaps we can change this code to take SIGNAL_GROUP_EXIT into account. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 1109909 | Oleg Nesterov | 10 December 2014, 23:55:11 UTC | exit: reparent: introduce find_child_reaper() find_new_reaper() does 2 completely different things. Not only it finds a reaper, it also updates pid_ns->child_reaper or kills the whole namespace if the caller is ->child_reaper. Now that has_child_subreaper logic doesn't depend on child_reaper check we can move that pid_ns code into a separate helper. IMHO this makes the code more clean, and this allows the next changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 175aed3 | Oleg Nesterov | 10 December 2014, 23:55:08 UTC | exit: reparent: document the ->has_child_subreaper checks Swap the "init_task" and same_thread_group() checks. This way it is more simple to document these checks and we can remove the link to the previous discussion on lkml. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 3750ef9 | Oleg Nesterov | 10 December 2014, 23:55:05 UTC | exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() Change find_new_reaper() to use for_each_thread() instead of deprecated while_each_thread(). We do not bother to check "thread != father" in the 1st loop, we can rely on PF_EXITING check. Note: this means the minor behavioural change: for_each_thread() starts from the group leader. But this should be fine, nobody should make any assumption about do_wait(__WNOTHREAD) when it comes to reparented tasks. And this can avoid the pointless reparenting to a short-living thread While zombie leaders are not that common. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 7d24e2d | Oleg Nesterov | 10 December 2014, 23:55:02 UTC | exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting find_new_reaper() assumes that "has_child_subreaper" logic is safe as long as we are not the exiting ->child_reaper and this is doubly wrong: 1. In fact it is safe if "pid_ns->child_reaper == father"; there must be no children after zap_pid_ns_processes() returns, so it doesn't matter what we return in this case and even pid_ns->child_reaper is wrong otherwise: we can't reparent to ->child_reaper == current. This is not a bug, but this is confusing. 2. It is not safe if we are not pid_ns->child_reaper but from the same thread group. We drop tasklist_lock before zap_pid_ns_processes(), so another thread can lock it and choose the new reaper from the upper namespace if has_child_subreaper == T, and this is obviously wrong. This is not that bad, zap_pid_ns_processes() won't return until the the new reaper reaps all zombies, but this should be fixed anyway. We could change for_each_thread() loop to use ->exit_state instead of PF_EXITING which we had to use until 8aac62706ada, or we could change copy_signal() to check CLONE_NEWPID before setting has_child_subreaper, but lets change this code so that it is clear we can't look outside of our namespace, otherwise same_thread_group(reaper, child_reaper) check will look wrong and confusing anyway. We can simply start from "father" and fix the problem. We can't wrongly return a thread from the same thread group if ->is_child_subreaper == T, we know that all threads have PF_EXITING set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 8a1296a | Oleg Nesterov | 10 December 2014, 23:54:59 UTC | exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting The ->has_child_subreaper code in find_new_reaper() finds alive "thread" but returns another "reaper" thread which can be dead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| c35a7f1 | Oleg Nesterov | 10 December 2014, 23:54:56 UTC | exit: proc: don't try to flush /proc/tgid/task/tgid proc_flush_task_mnt() always tries to flush task/pid, but this is pointless if we reap the leader. d_invalidate() is recursive, and if nothing else the next d_hash_and_lookup(tgid) should fail anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 26e75b5 | Oleg Nesterov | 10 December 2014, 23:54:54 UTC | exit: release_task: fix the comment about group leader accounting Contrary to what the comment in __exit_signal() says we do account the group leader. Fix this and explain why. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 986094d | Oleg Nesterov | 10 December 2014, 23:54:51 UTC | exit: wait: drop tasklist_lock before psig->c* accounting wait_task_zombie() no longer needs tasklist_lock to accumulate the psig->c* counters, we can drop it right after cmpxchg(exit_state). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| f953ccd | Oleg Nesterov | 10 December 2014, 23:54:48 UTC | exit: wait: don't use zombie->real_parent 1. wait_task_zombie() uses p->real_parent to get psig/siglock. This is correct but needs tasklist_lock, ->real_parent can exit. We can use "current" instead. This is our natural child, its parent must be our sub-thread. 2. Read psig/sig outside of ->siglock, ->signal is no longer protected by this lock. 3. Fix the outdated comments about tasklist_lock. We can not race with __exit_signal(), the whole thread group is dead, nobody but us can call it. Also clarify the usage of ->stats_lock and ->siglock. Note: thread_group_cputime_adjusted() is sub-optimal in this case, we probably want to export cputime_adjust() to avoid thread_group_cputime(). The comment says "all threads" but there are no other threads. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| f6507f8 | Oleg Nesterov | 10 December 2014, 23:54:45 UTC | exit: wait: cleanup the ptrace_reparented() checks Now that EXIT_DEAD is the terminal state we can kill "int traced" variable and check "state == EXIT_DEAD" instead to cleanup the code. In particular, this way it is clear that the check obviously doesn't need tasklist_lock. Also fix the type of "unsigned long state", "long" was always wrong although this doesn't matter because cmpxchg/xchg uses typeof(*ptr). [akpm@linux-foundation.org: don't make me google the C Operator Precedence table] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 7f6def9 | Oleg Nesterov | 10 December 2014, 23:54:42 UTC | usermodehelper: kill the kmod_thread_locker logic Now that we do not call kernel_thread(CLONE_VFORK) from the worker thread we can not deadlock if do_execve() in turn triggers another call_usermodehelper(), we can remove the kmod_thread_locker code. Note: we should probably kill khelper_wq and simply use one of the global workqueues, say, system_unbound_wq, this special wq for umh buys nothing nowadays. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:17 UTC |
| 7117bc8 | Oleg Nesterov | 10 December 2014, 23:54:39 UTC | usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() After "kernel/kmod: fix use-after-free of the sub_infostructure" CLONE_VFORK in __call_usermodehelper() buys nothing, we rely on on umh_complete() in ____call_usermodehelper() anyway. Remove it. This also eliminates the unnecessary sleep/wakeup in the likely case, and this allows the next change. While at it, kill the "int wait" locals in ____call_usermodehelper() and __call_usermodehelper(), they can safely use sub_info->wait. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| ddbc22e | Rasmus Villemoes | 10 December 2014, 23:54:37 UTC | fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp Relying on the sign (after casting to int) of the difference of two quantities for comparison is usually wrong. For example, should a-b turn out to be 2^31, the return value of cmp(a,b) is -2^31; but that would also be the return value from cmp(b, a). So a compares less than b and b compares less than a. One can also easily find three values a,b,c such that a compares less than b, b compares less than c, but a does not compare less than c. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 705304a | Ryusuke Konishi | 10 December 2014, 23:54:34 UTC | nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races Same story as in commit 41080b5a2401 ("nfsd race fixes: ext2") (similar ext2 fix) except that nilfs2 needs to use insert_inode_locked4() instead of insert_inode_locked() and a bug of a check for dead inodes needs to be fixed. If nilfs_iget() is called from nfsd after nilfs_new_inode() calls insert_inode_locked4(), nilfs_iget() will wait for unlock_new_inode() at the end of nilfs_mkdir()/nilfs_create()/etc to unlock the inode. If nilfs_iget() is called before nilfs_new_inode() calls insert_inode_locked4(), it will create an in-core inode and read its data from the on-disk inode. But, nilfs_iget() will find i_nlink equals zero and fail at nilfs_read_inode_common(), which will lead it to call iget_failed() and cleanly fail. However, this sanity check doesn't work as expected for reused on-disk inodes because they leave a non-zero value in i_mode field and it hinders the test of i_nlink. This patch also fixes the issue by removing the test on i_mode that nilfs2 doesn't need. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 72b9918 | Markus Elfring | 10 December 2014, 23:54:31 UTC | nilfs2: deletion of an unnecessary check before the function call "iput" The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 75dc857 | Andreas Rohner | 10 December 2014, 23:54:29 UTC | nilfs2: avoid duplicate segment construction for fsync() This patch removes filemap_write_and_wait_range() from nilfs_sync_file(), because it triggers a data segment construction by calling nilfs_writepages() with WB_SYNC_ALL. A data segment construction does not remove the inode from the i_dirty list and it does not clear the NILFS_I_DIRTY flag. Therefore nilfs_inode_dirty() still returns true, which leads to an unnecessary duplicate segment construction in nilfs_sync_file(). A call to filemap_write_and_wait_range() is not needed, because NILFS2 does not rely on the generic writeback mechanisms. Instead it implements its own mechanism to collect all dirty pages and write them into segments. It is more efficient to initiate the segment construction directly in nilfs_sync_file() without the detour over filemap_write_and_wait_range(). Additionally the lock of i_mutex is not needed, because all code blocks that are protected by i_mutex are also protected by a NILFS transaction: Function i_mutex nilfs_transaction ------------------------------------------------------ nilfs_ioctl_setflags: yes yes nilfs_fiemap: yes no nilfs_write_begin: yes yes nilfs_write_end: yes yes nilfs_lookup: yes no nilfs_create: yes yes nilfs_link: yes yes nilfs_mknod: yes yes nilfs_symlink: yes yes nilfs_mkdir: yes yes nilfs_unlink: yes yes nilfs_rmdir: yes yes nilfs_rename: yes yes nilfs_setattr: yes yes For nilfs_lookup() i_mutex is held for the parent directory, to protect it from modification. The segment construction does not modify directory inodes, so no lock is needed. nilfs_fiemap() reads the block layout on the disk, by using nilfs_bmap_lookup_contig(). This is already protected by bmap->b_sem. Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 6528b88 | Xunlei Pang | 10 December 2014, 23:54:26 UTC | rtc: refine rtc_timer_do_work() to consider other set alarm failures rtc_timer_do_work() only judges -ETIME failure of__rtc_set_alarm(), but doesn't handle other failures like -EIO, -EBUSY, etc. If there is a failure other than -ETIME, the next rtc_timer will stay in the timerqueue. Then later rtc_timers will be enqueued directly because they have a later expires time, so the alarm irq will never be programmed. When such failures happen, this patch will retry __rtc_set_alarm(), if still can't program the alarm time, it will remove current rtc_timer from timerqueue and fetch next one, thus preventing it from affecting other rtc timers. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| c594d67 | Xunlei Pang | 10 December 2014, 23:54:23 UTC | rtc/ab8500: set uie_unsupported flag Currently, ab8500 doesn't set uie_unsupported of rtc_device, while it doesn't support UIE, see ab8500_rtc_set_alarm(). Thus, when going through rtc_update_irq_enable()->rtc_timer_enqueue(), there's a chance it has an alarm timer1 queued before which is going to fired, so this update timer2 will be queued because it isn't the leftmost one, which means rtc_timer_enqueue() will return 0. This will result in two problems: 1) UIE EMUL will not be used. 2) When the alarm timer1 is fired, in rtc_timer_do_work() timer2 will fail to set the alarm time, so this rtc will disfunctional due to timer2 with the earliest expires in the timerqueue. So, rtc drivers must set this flag if they don't support UIE. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 7654e9d | Sanchayan Maity | 10 December 2014, 23:54:20 UTC | drivers/rtc/rtc-snvs: fix suspend/resume The alarm interrupt handler also reads registers which are part of SNVS and need clocks enabled. However, the resume function is called after IRQ's have been enabled, hence this leads to a abort: Unhandled fault: external abort on non-linefetch (0x1008) at 0x908c604c Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 421 Comm: sh Not tainted 3.18.0-rc5-00135-g0689c67-dirty #1592 task: 8e03e800 ti: 8cad8000 task.ti: 8cad8000 PC is at snvs_rtc_irq_handler+0x14/0x74 LR is at handle_irq_event_percpu+0x3c/0x144 Fix this by using the .{suspend/resume}_noirq callbacks instead of .{suspend/resume} . Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
| 7f89939 | Sanchayan Maity | 10 December 2014, 23:54:17 UTC | drivers/rtc/rtc-snvs: add clock support Add clock enable and disable support for the SNVS peripheral, which is required for using the RTC within the SNVS block. The clock is not strictly enforced, as this would break the i.MX devices. The clocking for the i.MX devices seems to be enabled elsewhere and enabling RTC SNVS for Vybrid results in a crash. This patch adds the clock support but also makes it optional so Vybrid platform can use the clock if defined while making sure not to break i.MX. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 December 2014, 01:41:16 UTC |
