Revision 4a33d4f17a19ece50ccf5ccbb8bc4ee539fb492e authored by Masahiro Yamada on 20 May 2019, 02:54:37 UTC, committed by Masahiro Yamada on 20 May 2019, 23:54:05 UTC
I just thought it was a good idea to scan builtin.modules in the name uniqueness checking, but a couple of false positives were found. Stephen reported a false positive for ppc64_defconfig: warning: same basename if the following are built as modules: arch/powerpc/platforms/powermac/nvram.ko drivers/char/nvram.ko The former is never built as a module as you see in arch/powerpc/platforms/powermac/Makefile: # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o Another example of false positive is arm64 defconfig: warning: same basename if the following are built as modules: arch/arm64/lib/crc32.ko lib/crc32.ko It is true CONFIG_CRC32 is a tristate option but it is always 'y' since it is select'ed by ARM64. Hence, neither of them is built as a module for the arm64 build. From the above, modules.builtin essentially contains false positives. I do not think it is a big deal as far as kmod is concerned, but false positive warnings in the kernel build make people upset. It is better to not check it. Even without builtin.modules checked, we have enough (and more solid) test coverage with allmodconfig. While I touched this part, I replaced the sed code with neater one provided by Stephen. Link: https://lkml.org/lkml/2019/5/19/120 Link: https://lkml.org/lkml/2019/5/19/123 Fixes: 3a48a91901c5 ("kbuild: check uniqueness of module names") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1 parent 055efab
cleanpatch
#!/usr/bin/env perl
# SPDX-License-Identifier: GPL-2.0
#
# Clean a patch file -- or directory of patch files -- of stealth whitespace.
# WARNING: this can be a highly destructive operation. Use with caution.
#
use warnings;
use bytes;
use File::Basename;
# Default options
$max_width = 79;
# Clean up space-tab sequences, either by removing spaces or
# replacing them with tabs.
sub clean_space_tabs($)
{
no bytes; # Tab alignment depends on characters
my($li) = @_;
my($lo) = '';
my $pos = 0;
my $nsp = 0;
my($i, $c);
for ($i = 0; $i < length($li); $i++) {
$c = substr($li, $i, 1);
if ($c eq "\t") {
my $npos = ($pos+$nsp+8) & ~7;
my $ntab = ($npos >> 3) - ($pos >> 3);
$lo .= "\t" x $ntab;
$pos = $npos;
$nsp = 0;
} elsif ($c eq "\n" || $c eq "\r") {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos = 0;
} elsif ($c eq " ") {
$nsp++;
} else {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos++;
}
}
$lo .= " " x $nsp;
return $lo;
}
# Compute the visual width of a string
sub strwidth($) {
no bytes; # Tab alignment depends on characters
my($li) = @_;
my($c, $i);
my $pos = 0;
my $mlen = 0;
for ($i = 0; $i < length($li); $i++) {
$c = substr($li,$i,1);
if ($c eq "\t") {
$pos = ($pos+8) & ~7;
} elsif ($c eq "\n") {
$mlen = $pos if ($pos > $mlen);
$pos = 0;
} else {
$pos++;
}
}
$mlen = $pos if ($pos > $mlen);
return $mlen;
}
$name = basename($0);
@files = ();
while (defined($a = shift(@ARGV))) {
if ($a =~ /^-/) {
if ($a eq '-width' || $a eq '-w') {
$max_width = shift(@ARGV)+0;
} else {
print STDERR "Usage: $name [-width #] files...\n";
exit 1;
}
} else {
push(@files, $a);
}
}
foreach $f ( @files ) {
print STDERR "$name: $f\n";
if (! -f $f) {
print STDERR "$f: not a file\n";
next;
}
if (!open(FILE, '+<', $f)) {
print STDERR "$name: Cannot open file: $f: $!\n";
next;
}
binmode FILE;
# First, verify that it is not a binary file; consider any file
# with a zero byte to be a binary file. Is there any better, or
# additional, heuristic that should be applied?
$is_binary = 0;
while (read(FILE, $data, 65536) > 0) {
if ($data =~ /\0/) {
$is_binary = 1;
last;
}
}
if ($is_binary) {
print STDERR "$name: $f: binary file\n";
next;
}
seek(FILE, 0, 0);
$in_bytes = 0;
$out_bytes = 0;
$lineno = 0;
@lines = ();
$in_hunk = 0;
$err = 0;
while ( defined($line = <FILE>) ) {
$lineno++;
$in_bytes += length($line);
if (!$in_hunk) {
if ($line =~
/^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@/) {
$minus_lines = $2;
$plus_lines = $4;
if ($minus_lines || $plus_lines) {
$in_hunk = 1;
@hunk_lines = ($line);
}
} else {
push(@lines, $line);
$out_bytes += length($line);
}
} else {
# We're in a hunk
if ($line =~ /^\+/) {
$plus_lines--;
$text = substr($line, 1);
$text =~ s/[ \t\r]*$//; # Remove trailing spaces
$text = clean_space_tabs($text);
$l_width = strwidth($text);
if ($max_width && $l_width > $max_width) {
print STDERR
"$f:$lineno: adds line exceeds $max_width ",
"characters ($l_width)\n";
}
push(@hunk_lines, '+'.$text);
} elsif ($line =~ /^\-/) {
$minus_lines--;
push(@hunk_lines, $line);
} elsif ($line =~ /^ /) {
$plus_lines--;
$minus_lines--;
push(@hunk_lines, $line);
} else {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
last;
}
if ($plus_lines < 0 || $minus_lines < 0) {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
last;
} elsif ($plus_lines == 0 && $minus_lines == 0) {
# End of a hunk. Process this hunk.
my $i;
my $l;
my @h = ();
my $adj = 0;
my $done = 0;
for ($i = scalar(@hunk_lines)-1; $i > 0; $i--) {
$l = $hunk_lines[$i];
if (!$done && $l eq "+\n") {
$adj++; # Skip this line
} elsif ($l =~ /^[ +]/) {
$done = 1;
unshift(@h, $l);
} else {
unshift(@h, $l);
}
}
$l = $hunk_lines[0]; # Hunk header
undef @hunk_lines; # Free memory
if ($adj) {
die unless
($l =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@(.*)$/);
my $mstart = $1;
my $mlin = $2;
my $pstart = $3;
my $plin = $4;
my $tail = $5; # doesn't include the final newline
$l = sprintf("@@ -%d,%d +%d,%d @@%s\n",
$mstart, $mlin, $pstart, $plin-$adj,
$tail);
}
unshift(@h, $l);
# Transfer to the output array
foreach $l (@h) {
$out_bytes += length($l);
push(@lines, $l);
}
$in_hunk = 0;
}
}
}
if ($in_hunk) {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
}
if (!$err) {
if ($in_bytes != $out_bytes) {
# Only write to the file if changed
seek(FILE, 0, 0);
print FILE @lines;
if ( !defined($where = tell(FILE)) ||
!truncate(FILE, $where) ) {
die "$name: Failed to truncate modified file: $f: $!\n";
}
}
}
close(FILE);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...