Revision 4b3831fbb3496444b4bac1b6f93190894892b56b authored by Eh Tan on 29 August 2007, 23:39:17 UTC, committed by Eh Tan on 29 August 2007, 23:39:17 UTC
1 parent f0d9ebe
Citcom.c
/*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*<LicenseText>
*
* CitcomS by Louis Moresi, Shijie Zhong, Lijie Han, Eh Tan,
* Clint Conrad, Michael Gurnis, and Eun-seo Choi.
* Copyright (C) 1994-2005, California Institute of Technology.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*</LicenseText>
*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <mpi.h>
#include <math.h>
#include <sys/types.h>
#include "element_definitions.h"
#include "global_defs.h"
#include "citcom_init.h"
#include "output.h"
#include "parallel_related.h"
#include "checkpoints.h"
extern int Emergency_stop;
void solver_init(struct All_variables *E);
int main(argc,argv)
int argc;
char **argv;
{ /* Functions called by main*/
void general_stokes_solver();
void general_stokes_solver_pseudo_surf();
void read_instructions();
void initial_setup();
void initial_conditions();
void solve_constrained_flow();
void solve_derived_velocities();
void process_temp_field();
void post_processing();
void vcopy();
void construct_mat_group();
void read_velocity_boundary_from_file();
void read_mat_from_file();
void open_time();
void output_finalize();
void PG_timestep_init();
void tracer_advection();
float dot();
float cpu_time_on_vp_it;
int cpu_total_seconds,k, *temp;
double CPU_time0(),time,initial_time,start_time,avaimem();
struct All_variables *E;
MPI_Comm world;
MPI_Init(&argc,&argv); /* added here to allow command-line input */
if (argc < 2) {
fprintf(stderr,"Usage: %s PARAMETERFILE\n", argv[0]);
parallel_process_termination();
}
world = MPI_COMM_WORLD;
E = citcom_init(&world); /* allocate global E and do initializaion here */
solver_init(E);
start_time = time = CPU_time0();
read_instructions(E, argv[1]);
initial_setup(E);
cpu_time_on_vp_it = CPU_time0();
initial_time = cpu_time_on_vp_it - time;
if (E->parallel.me == 0) {
fprintf(stderr,"Input parameters taken from file '%s'\n",argv[1]);
fprintf(stderr,"Initialization complete after %g seconds\n\n",initial_time);
fprintf(E->fp,"Initialization complete after %g seconds\n\n",initial_time);
fflush(E->fp);
}
/* This if-block is replaced by CitcomS.Solver.launch()*/
if (E->control.restart || E->control.post_p) {
read_checkpoint(E);
if (E->control.post_p) {
post_processing(E);
parallel_process_termination();
}
}
else {
initial_conditions(E);
if(E->control.pseudo_free_surf) {
if(E->mesh.topvbc == 2)
general_stokes_solver_pseudo_surf(E);
else
assert(0);
}
else
general_stokes_solver(E);
}
(E->problem_output)(E, E->monitor.solution_cycles);
/* information about simulation time and wall clock time */
output_time(E, E->monitor.solution_cycles);
if (E->control.stokes) {
if(E->control.tracer==1)
tracer_advection(E);
parallel_process_termination();
}
while ( E->control.keep_going && (Emergency_stop == 0) ) {
/* The next few lines of code were replaced by
* pyCitcom_PG_timestep_solve() in Pyre version.
* If you modify here, make sure its Pyre counterpart
* is modified as well */
E->monitor.solution_cycles++;
if(E->monitor.solution_cycles>E->control.print_convergence)
E->control.print_convergence=1;
(E->next_buoyancy_field)(E);
/* */
if(((E->advection.total_timesteps < E->advection.max_total_timesteps) &&
(E->advection.timesteps < E->advection.max_timesteps)) ||
(E->advection.total_timesteps < E->advection.min_timesteps) )
E->control.keep_going = 1;
else
E->control.keep_going = 0;
cpu_total_seconds = CPU_time0()-start_time;
if (cpu_total_seconds > E->control.record_all_until) {
E->control.keep_going = 0;
}
if (E->monitor.T_interior>1.5) {
fprintf(E->fp,"quit due to maxT = %.4e sub_iteration%d\n",E->monitor.T_interior,E->advection.last_sub_iterations);
parallel_process_termination();
}
if(E->control.tracer==1)
tracer_advection(E);
general_stokes_solver(E);
if(E->output.write_q_files)
if ((E->monitor.solution_cycles % E->output.write_q_files)==0)
heat_flux(E);
if ((E->monitor.solution_cycles % E->control.record_every)==0) {
(E->problem_output)(E, E->monitor.solution_cycles);
}
/* information about simulation time and wall clock time */
output_time(E, E->monitor.solution_cycles);
if ((E->monitor.solution_cycles % E->control.checkpoint_frequency)==0) {
output_checkpoint(E);
}
if(E->control.mat_control==1)
read_mat_from_file(E);
/*
else
construct_mat_group(E);
*/
if(E->control.vbcs_file==1)
read_velocity_boundary_from_file(E);
/*
else
renew_top_velocity_boundary(E);
*/
if (E->parallel.me == 0) {
fprintf(E->fp,"CPU total = %g & CPU = %g for step %d time = %.4e dt = %.4e maxT = %.4e sub_iteration%d\n",CPU_time0()-start_time,CPU_time0()-time,E->monitor.solution_cycles,E->monitor.elapsed_time,E->advection.timestep,E->monitor.T_interior,E->advection.last_sub_iterations);
time = CPU_time0();
}
}
if (E->parallel.me == 0) {
fprintf(stderr,"cycles=%d\n",E->monitor.solution_cycles);
cpu_time_on_vp_it=CPU_time0()-cpu_time_on_vp_it;
fprintf(stderr,"Average cpu time taken for velocity step = %f\n",
cpu_time_on_vp_it/((float)(E->monitor.solution_cycles-E->control.restart)));
fprintf(E->fp,"Initialization overhead = %f\n",initial_time);
fprintf(E->fp,"Average cpu time taken for velocity step = %f\n",
cpu_time_on_vp_it/((float)(E->monitor.solution_cycles-E->control.restart)));
}
output_finalize(E);
parallel_process_termination();
return(0);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...