Revision 4c3de7e5bfbeb0ac1f702d1903ef69ad3a7f590c authored by Linus Torvalds on 25 March 2017, 22:13:55 UTC, committed by Linus Torvalds on 25 March 2017, 22:13:55 UTC
Pull audit fix from Paul Moore: "We've got an audit fix, and unfortunately it is big. While I'm not excited that we need to be sending you something this large during the -rcX phase, it does fix some very real, and very tangled, problems relating to locking, backlog queues, and the audit daemon connection. This code has passed our testsuite without problem and it has held up to my ad-hoc stress tests (arguably better than the existing code), please consider pulling this as fix for the next v4.11-rcX tag" * 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit: audit: fix auditd/kernel connection state tracking
fault.c
/* Page Fault Handling for ARC (TLB Miss / ProtV)
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/signal.h>
#include <linux/interrupt.h>
#include <linux/sched/signal.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/perf_event.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
/*
* kernel virtual address is required to implement vmalloc/pkmap/fixmap
* Refer to asm/processor.h for System Memory Map
*
* It simply copies the PMD entry (pointer to 2nd level page table or hugepage)
* from swapper pgdir to task pgdir. The 2nd level table/page is thus shared
*/
noinline static int handle_kernel_vaddr_fault(unsigned long address)
{
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*/
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pgd = pgd_offset_fast(current->active_mm, address);
pgd_k = pgd_offset_k(address);
if (!pgd_present(*pgd_k))
goto bad_area;
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
goto bad_area;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto bad_area;
set_pmd(pmd, *pmd_k);
/* XXX: create the TLB entry here */
return 0;
bad_area:
return 1;
}
void do_page_fault(unsigned long address, struct pt_regs *regs)
{
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
siginfo_t info;
int fault, ret;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*/
if (address >= VMALLOC_START) {
ret = handle_kernel_vaddr_fault(address);
if (unlikely(ret))
goto bad_area_nosemaphore;
else
return;
}
info.si_code = SEGV_MAPERR;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (faulthandler_disabled() || !mm)
goto no_context;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
info.si_code = SEGV_ACCERR;
/* Handle protection violation, execute on heap or stack */
if ((regs->ecr_vec == ECR_V_PROTV) &&
(regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
goto bad_area;
if (write) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
} else {
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(vma, address, flags);
/* If Pagefault was interrupted by SIGKILL, exit page fault "early" */
if (unlikely(fatal_signal_pending(current))) {
if ((fault & VM_FAULT_ERROR) && !(fault & VM_FAULT_RETRY))
up_read(&mm->mmap_sem);
if (user_mode(regs))
return;
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (likely(!(fault & VM_FAULT_ERROR))) {
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/* To avoid updating stats twice for retry case */
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
goto retry;
}
}
/* Fault Handled Gracefully */
up_read(&mm->mmap_sem);
return;
}
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGSEGV)
goto bad_area;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
/* no man's land */
BUG();
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
up_read(&mm->mmap_sem);
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
tsk->thread.fault_address = address;
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
info.si_addr = (void __user *)address;
force_sig_info(SIGSEGV, &info, tsk);
return;
}
no_context:
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
* when it acesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
*/
if (fixup_exception(regs))
return;
die("Oops", regs, address);
out_of_memory:
up_read(&mm->mmap_sem);
if (user_mode(regs)) {
pagefault_out_of_memory();
return;
}
goto no_context;
do_sigbus:
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
tsk->thread.fault_address = address;
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
info.si_addr = (void __user *)address;
force_sig_info(SIGBUS, &info, tsk);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...