4c4a5cf | Akinobu Mita | 24 December 2010, 20:03:59 UTC | powerpc/rtas_flash: Use simple_read_from_buffer Simplify read file operation for /proc/powerpc/rtas/* interface by using simple_read_from_buffer. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 21 January 2011, 03:08:34 UTC |
63c3b9d | Akinobu Mita | 24 December 2010, 20:03:56 UTC | powerpc/spufs: Use simple_write_to_buffer Simplify several write fileoperations for spufs by using simple_write_to_buffer(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 21 January 2011, 03:08:34 UTC |
06ca218 | Steven Rostedt | 22 December 2010, 16:42:56 UTC | powerpc/ppc32/tracing: Add stack frame to calls of trace_hardirqs_on/off 32-bit variant of the previous patch for 64-bit: << When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack.... >> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 21 January 2011, 03:08:33 UTC |
3cb5f1a | Steven Rostedt | 23 December 2010, 19:46:06 UTC | powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: Joerg Sommer <joerg@alea.gnuu.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 21 January 2011, 03:08:33 UTC |
c033728 | Michael Ellerman | 07 November 2010, 18:22:29 UTC | powerpc: Ensure the else case of feature sections will fit When we create an alternative feature section, the else case must be the same size or smaller than the body. This is because when we patch the else case in we just overwrite the body, so there must be room. Up to now we just did this by inspection, but it's quite easy to enforce it in the assembler, so we should. The only change is to add the ifgt block, but that effects the alignment of the tabs and so the whole macro is modified. Also add a test, but #if 0 it because we don't want to break the build. Anyone who's modifying the feature macros should enable the test. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 21 January 2011, 03:08:33 UTC |
50f4df4 | Benjamin Herrenschmidt | 21 January 2011, 00:00:44 UTC | Merge remote branch 'kumar/next' into merge | 21 January 2011, 00:00:44 UTC |
12fcdba | Linus Torvalds | 20 January 2011, 04:27:25 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Unify "numa=" command line option handling Revert "x86: Make relocatable kernel work with new binutils" | 20 January 2011, 04:27:25 UTC |
1268afe | Linus Torvalds | 20 January 2011, 04:25:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ... | 20 January 2011, 04:25:45 UTC |
4580ccc | Shan Wei | 18 January 2011, 22:39:00 UTC | sctp: user perfect name for Delayed SACK Timer option The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK, not SCTP_DELAYED_ACK. Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK, for making compatibility with existing applications. Reference: 8.1.19. Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK) (http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25) Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 January 2011, 00:51:29 UTC |
d402786 | Eric Dumazet | 19 January 2011, 00:51:36 UTC | net: fix can_checksum_protocol() arguments swap commit 0363466866d901fbc (net offloading: Convert checksums to use centrally computed features.) mistakenly swapped can_checksum_protocol() arguments. This broke IPv6 on bnx2 for instance, on NIC without TCPv6 checksum offloads. Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 22:15:21 UTC |
b8f3ab4 | David S. Miller | 18 January 2011, 20:40:38 UTC | Revert "netlink: test for all flags of the NLM_F_DUMP composite" This reverts commit 0ab03c2b1478f2438d2c80204f7fef65b1bca9cf. It breaks several things including the avahi daemon. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 21:34:20 UTC |
9032160 | Jan Beulich | 19 January 2011, 08:57:21 UTC | x86: Unify "numa=" command line option handling In order to be able to suppress the use of SRAT tables that 32-bit Linux can't deal with (in one case known to lead to a non-bootable system, unless disabling ACPI altogether), move the "numa=" option handling to common code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Renninger <trenn@suse.de> LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 January 2011, 09:25:18 UTC |
6b35eb9 | Ingo Molnar | 19 January 2011, 09:09:42 UTC | Revert "x86: Make relocatable kernel work with new binutils" This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with new binutils"). Markus Trippelsdorf reported a boot failure caused by this patch. The real solution to the original patch will likely involve an arch-generic solution to define an overlaid jiffies_64 and jiffies variables. Until that's done and tested on all architectures revert this commit to solve the regression. Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4D36A759.60704@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 January 2011, 09:09:42 UTC |
ff76015 | Anton Vorontsov | 18 January 2011, 02:36:02 UTC | gianfar: Fix misleading indentation in startup_gfar() Just stumbled upon the issue while looking for another bug. The code looks correct, the indentation is not. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:51 UTC |
5ae2f66 | Kuninori Morimoto | 13 January 2011, 21:47:42 UTC | net/irda/sh_irda: return to RX mode when TX error sh_irda can not use RX/TX in same time, but this driver didn't return to RX mode when TX error occurred. This patch care xmit error case to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:51 UTC |
6ee400a | Jesse Gross | 17 January 2011, 20:46:00 UTC | net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. In netif_skb_features() we return only the features that are valid for vlans if we have a vlan packet. However, we should not mask out NETIF_F_HW_VLAN_TX since it enables transmission of vlan tags and is obviously valid. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:50 UTC |
f742aa8 | Alexey Orishko | 17 January 2011, 07:07:25 UTC | USB CDC NCM: tx_fixup() race condition fix - tx_fixup() can be called from either timer callback or from xmit() in usbnet, so spinlock is added to avoid concurrency-related problem. - minor correction due to checkpatch warning for some line over 80 chars after previous patch was applied. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:50 UTC |
1956cc5 | Jesper Juhl | 17 January 2011, 10:24:57 UTC | ns83820: Avoid bad pointer deref in ns83820_init_one(). In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate memory via alloc_etherdev(). We then call PRIV() on the returned storage which is 'return netdev_priv()'. netdev_priv() takes the pointer it is passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and returns it. Then we test the resulting pointer for NULL, which it is unlikely to be at this point, and later dereference it. This will go bad if alloc_etherdev() actually returned NULL. This patch reworks the code slightly so that we test for a NULL pointer (and return -ENOMEM) directly after calling alloc_etherdev(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:49 UTC |
2fdc1c8 | Romain Francoise | 17 January 2011, 07:59:18 UTC | ipv6: Silence privacy extensions initialization When a network namespace is created (via CLONE_NEWNET), the loopback interface is automatically added to the new namespace, triggering a printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set. This is problematic for applications which use CLONE_NEWNET as part of a sandbox, like Chromium's suid sandbox or recent versions of vsftpd. On a busy machine, it can lead to thousands of useless "lo: Disabled Privacy Extensions" messages appearing in dmesg. It's easy enough to check the status of privacy extensions via the use_tempaddr sysctl, so just removing the printk seems like the most sensible solution. Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:13:49 UTC |
6aefc52 | Yaniv Rosner | 18 January 2011, 04:33:55 UTC | bnx2x: Update bnx2x version to 1.62.00-4 Update bnx2x version to 1.62.00-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:40 UTC |
82a0d47 | Yaniv Rosner | 18 January 2011, 04:33:52 UTC | bnx2x: Fix AER setting for BCM57712 Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:39 UTC |
f25b3c8 | Yaniv Rosner | 18 January 2011, 04:33:47 UTC | bnx2x: Fix BCM84823 LED behavior Fix BCM84823 LED behavior which may show on some systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:39 UTC |
791f18c | Yaniv Rosner | 18 January 2011, 04:33:42 UTC | bnx2x: Mark full duplex on some external PHYs Device may show incorrect duplex mode for devices with external PHY Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:38 UTC |
5c99274 | Yaniv Rosner | 18 January 2011, 04:33:36 UTC | bnx2x: Fix BCM8073/BCM8727 microcode loading Improve microcode loading verification before proceeding to next stage Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:38 UTC |
1f48353 | Yaniv Rosner | 18 January 2011, 04:33:31 UTC | bnx2x: LED fix for BCM8727 over BCM57712 LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:37 UTC |
b21a342 | Yaniv Rosner | 18 January 2011, 04:33:24 UTC | bnx2x: Common init will be executed only once after POR Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode. However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:36 UTC |
74d7a11 | Yaniv Rosner | 18 January 2011, 04:33:18 UTC | bnx2x: Swap BCM8073 PHY polarity if required Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 January 2011, 00:10:36 UTC |
c56eb8f | Linus Torvalds | 18 January 2011, 23:14:02 UTC | Linux 2.6.38-rc1 | 18 January 2011, 23:14:02 UTC |
39f3b1a | Linus Torvalds | 18 January 2011, 22:30:00 UTC | Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94 | 18 January 2011, 22:30:00 UTC |
335bc70 | Linus Torvalds | 18 January 2011, 22:29:37 UTC | Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance | 18 January 2011, 22:29:37 UTC |
404cbbd | Linus Torvalds | 18 January 2011, 22:29:21 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils | 18 January 2011, 22:29:21 UTC |
5d7e8af | Linus Torvalds | 18 January 2011, 22:28:48 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ... | 18 January 2011, 22:28:48 UTC |
f966a13 | David S. Miller | 18 January 2011, 20:50:19 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 | 18 January 2011, 20:50:19 UTC |
c7bf71c | Guenter Roeck | 17 January 2011, 20:48:20 UTC | hwmon: (lm93) Add support for LM94 This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> | 18 January 2011, 20:22:54 UTC |
38d5939 | Wey-Yi Guy | 18 January 2011, 15:59:13 UTC | iwlwifi: fix valid chain reading from EEPROM When read valid tx/rx chains from EEPROM, there is a bug to use the tx chain value for both tx and rx, the result of this cause low receive throughput on 1x2 devices becuase rx will only utilize single chain instead of two chains Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 18 January 2011, 20:10:31 UTC |
599b13a | Bob Copeland | 18 January 2011, 13:06:43 UTC | ath5k: fix locking in tx_complete_poll_work ath5k_reset must be called with sc->lock. Since the tx queue watchdog runs in a workqueue and accesses sc, it's appropriate to just take the lock over the whole function. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 18 January 2011, 20:10:31 UTC |
66832eb | Oleg Nesterov | 18 January 2011, 16:10:32 UTC | perf: Validate cpu early in perf_event_alloc() Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 January 2011, 18:34:23 UTC |
22a4ec7 | Oleg Nesterov | 18 January 2011, 16:10:08 UTC | perf: Find_get_context: fix the per-cpu-counter check If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 January 2011, 18:34:23 UTC |
79aa18d | Aurelien Jarno | 18 January 2011, 11:20:45 UTC | MIPS: Malta: enable Cirrus FB console While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:29 UTC |
92e88b4 | Aurelien Jarno | 18 January 2011, 11:20:44 UTC | MIPS: add CONFIG_VIRTUALIZATION for virtio support Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:28 UTC |
1befdd5 | David Daney | 14 October 2010, 19:36:49 UTC | MIPS: Implement __read_mostly Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:28 UTC |
f5b35d0 | Gabor Juhos | 04 January 2011, 20:28:29 UTC | MIPS: ath79: add common WMAC device for AR913X based boards Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:28 UTC |
aa6695e | Gabor Juhos | 04 January 2011, 20:28:28 UTC | MIPS: ath79: Add initial support for the Atheros AP81 reference board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:27 UTC |
68a1d31 | Gabor Juhos | 04 January 2011, 20:28:23 UTC | MIPS: ath79: add common SPI controller device Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:27 UTC |
8efaef4 | Gabor Juhos | 04 January 2011, 20:28:22 UTC | SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:27 UTC |
3f348c5 | Gabor Juhos | 04 January 2011, 20:28:21 UTC | MIPS: ath79: add common GPIO buttons device Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:27 UTC |
858f763 | Gabor Juhos | 04 January 2011, 20:28:20 UTC | MIPS: ath79: add common watchdog device All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:26 UTC |
d8fec1f | Gabor Juhos | 04 January 2011, 20:28:18 UTC | MIPS: ath79: add common GPIO LEDs device Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:26 UTC |
0cde722 | Gabor Juhos | 04 January 2011, 20:28:17 UTC | MIPS: ath79: add initial support for the Atheros PB44 reference board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:26 UTC |
0aabf1a | Gabor Juhos | 04 January 2011, 20:28:16 UTC | MIPS: ath79: utilize the MIPS multi-machine support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:25 UTC |
6eae43c | Gabor Juhos | 04 January 2011, 20:28:15 UTC | MIPS: ath79: add GPIOLIB support This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:25 UTC |
d4a67d9 | Gabor Juhos | 04 January 2011, 20:28:14 UTC | MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:24 UTC |
94bb0c1 | David Daney | 28 December 2010, 21:26:23 UTC | MIPS: jump label: Add MIPS support. In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:24 UTC |
8d662c8 | David Daney | 28 December 2010, 02:18:29 UTC | MIPS: Use WARN() in uasm for better diagnostics. On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:24 UTC |
2c8c53e | David Daney | 28 December 2010, 02:07:57 UTC | MIPS: Optimize TLB handlers for Octeon CPUs Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:23 UTC |
bb3d68c | David Daney | 28 December 2010, 02:07:56 UTC | MIPS: Add LDX and LWX instructions to uasm. Needed by Octeon II optimized TLB handlers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Pachwork: https://patchwork.linux-mips.org/patch/1903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:23 UTC |
cc33ae4 | David Daney | 20 December 2010, 23:54:50 UTC | MIPS: Use BBIT instructions in TLB handlers If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they are more efficient than an AND followed by an branch and then restoring the clobbered register. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:23 UTC |
afc7c98 | David Daney | 20 December 2010, 23:54:49 UTC | MIPS: Declare uasm bbit0 and bbit1 functions. these are already defined, but declaring them allow them to be used outside of uasm.c. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:22 UTC |
3d8bfdd | David Daney | 21 December 2010, 22:19:11 UTC | MIPS: Use C0_KScratch (if present) to hold PGD pointer. Decide at runtime to use either Context or KScratch to hold the PGD pointer. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:22 UTC |
c42aef0 | David Daney | 21 December 2010, 22:19:10 UTC | MIPS: Add DINSM to uasm. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:22 UTC |
e77c32f | David Daney | 21 December 2010, 22:19:09 UTC | MIPS: Probe for presence of KScratch registers. Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1877/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:22 UTC |
487d70d | Gabor Juhos | 23 November 2010, 15:06:25 UTC | MIPS: Add generic support for multiple machines within a single kernel This patch adds a generic solution to support multiple machines based on a given SoC within a single kernel image. It is implemented already for several other architectures but MIPS has no generic support for that yet. [Ralf: This competes with DT but DT is a much more complex solution and this code has been used by OpenWRT for a long time so for now DT is a bad reason to stop the merge but longer term this should be migrated to DT.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: kaloz@openwrt.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1814/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:21 UTC |
0bec405 | Joe Perches | 12 November 2010, 21:37:52 UTC | MIPS: Use printf extension %pR for struct resource Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:21 UTC |
a1181ca | Joe Perches | 05 November 2010, 03:07:26 UTC | MIPS: Sibyte: Use vzalloc in sbbus profiler Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 18 January 2011, 18:30:21 UTC |
aa891f6 | Linus Torvalds | 18 January 2011, 18:00:50 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: parisc: fix compile breakage caused by inlining maybe_mkwrite parisc : Remove broken line wrapping handling pdc_iodc_print() | 18 January 2011, 18:00:50 UTC |
a25cecc | Linus Torvalds | 18 January 2011, 16:06:22 UTC | Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix asm/pgtable.h microblaze: Fix missing pagemap.h | 18 January 2011, 16:06:22 UTC |
b7c15e4 | Linus Torvalds | 18 January 2011, 16:05:50 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix initialization for HP 2011 notebooks ALSA: hda - Add support for VMware controller ALSA: hda - consitify string arrays ALSA: hda - Add add multi-streaming playback for AD1988 ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code ASoC: WM8990: msleep() takes milliseconds not jiffies ALSA : au88x0 - Limit number of channels to fix Oops via OSS emu ALSA: constify functions in ac97 ASoC: WL1273 FM radio: Fix breakage with MFD API changes ALSA: hda - More coverage for odd-number channels elimination for HDMI ALSA: hda - Store PCM parameters properly in HDMI open callback ALSA: hda - Rearrange fixup struct in patch_realtek.c ALSA: oxygen: Xonar DG: fix CS4245 register writes ALSA: hda - Suppress the odd number of channels for HDMI ALSA: hda - Add fixup-call in init callback ALSA: hda - Reorganize fixup structure for Realtek ALSA: hda - Apply Sony VAIO hweq fixup only once ALSA: hda - Apply mario fixup only once ALSA: hda - Remove unused fixup entry for ALC262 | 18 January 2011, 16:05:50 UTC |
6a7f6ec | Linus Torvalds | 18 January 2011, 16:05:20 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits) m68knommu: fix broken setting of irq_chip and handler m68knommu: switch to using -mcpu= flags for ColdFire targets m68knommu: arch/m68knommu/Kconfig whitespace cleanup m68knommu: create optimal separate instruction and data cache for ColdFire m68knommu: support ColdFire caches that do copyback and write-through m68knommu: support version 2 ColdFire split cache m68knommu: make cache push code ColdFire generic m68knommu: clean up ColdFire cache control code m68knommu: move inclusion of ColdFire v4 cache registers m68knommu: merge bit definitions for version 3 ColdFire cache controller m68knommu: create bit definitions for the version 2 ColdFire cache controller m68knommu: remove empty __iounmap() it is no used m68knommu: remove kernel_map() code, it is not used m68knommu: remove do_page_fault(), it is not used m68knommu: use user stack pointer hardware on some ColdFire cores m68knommu: remove command line printing DEBUG m68knommu: remove fasthandler interrupt code m68knommu: move UART addressing to part specific includes m68knommu: fix clock rate value reported for ColdFire 54xx parts m68knommu: move ColdFire CPU names into their headers ... | 18 January 2011, 16:05:20 UTC |
c6fa63c | Linus Torvalds | 18 January 2011, 16:04:30 UTC | Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix tracepoint id to string perf.data header table perf tools: Fix handling of wildcards in tracepoint event selectors powerpc: perf: Fix frequency calculation for overflowing counters | 18 January 2011, 16:04:30 UTC |
34c682a | Linus Torvalds | 18 January 2011, 16:03:55 UTC | Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Add missing virtual ASoC DMA device ARM: S5PV210: Add missing virtual ASoC DMA device ARM: S5P6450: Add missing virtual ASoC DMA device ARM: S5P6440: Add missing virtual ASoC DMA device ARM: S5P6442: Enable I2S device to work on SMDK6442 | 18 January 2011, 16:03:55 UTC |
8dec000 | Linus Torvalds | 18 January 2011, 15:58:36 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: autofs4: clean ->d_release() and autofs4_free_ino() up autofs4: split autofs4_init_ino() autofs4: mkdir and symlink always get a dentry that had passed lookup autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymore autofs4: kill ->size in autofs_info autofs4: pass mode to autofs4_get_inode() explicitly autofs4: autofs4_mkroot() is not different from autofs4_init_ino() autofs4: keep symlink body in inode->i_private autofs4 - fix debug print in autofs4_lookup() vfs - fix dentry ref count in do_lookup() autofs4 - fix get_next_positive_dentry() | 18 January 2011, 15:58:36 UTC |
c5ed514 | Peter Zijlstra | 17 January 2011, 12:45:37 UTC | perf: Fix contexted inheritance Linus reported that the RCU lockdep annotation bits triggered for this rcu_dereference() because we're not holding rcu_read_lock(). Going over the code I cannot convince myself its correct: - holding a ref on the parent_ctx, doesn't avoid it being uncloned concurrently (as the comment says), so we can race with a free. - holding parent_ctx->mutex doesn't avoid the above free from taking place either, it would at best avoid parent_ctx from being freed. I.e. the warning is correct. To fix the bug, serialize against the unclone_ctx() call by extending the reach of the parent_ctx->lock. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 January 2011, 14:10:35 UTC |
7b698ea | Brian Gerst | 17 January 2011, 12:32:10 UTC | x86: Clear irqstack thread_info Mathias Merz reported that v2.6.37 failed to boot on his system. Make sure that the thread_info part of the irqstack is initialized to zeroes. Reported-and-Tested-by: Matthias Merz <linux@merz-ka.de> Signed-off-by: Brian Gerst <brgerst@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <AANLkTimyKXfJ1x8tgwrr1hYnNLrPfgE1NTe4z7L6tUDm@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 January 2011, 13:58:37 UTC |
27de094 | Takashi Iwai | 18 January 2011, 13:05:44 UTC | Merge branch 'fix/asoc' into for-linus | 18 January 2011, 13:05:44 UTC |
86b1e8d | Shaohua Li | 18 January 2011, 00:57:49 UTC | x86: Make relocatable kernel work with new binutils The CONFIG_RELOCATABLE=y option is broken with new binutils, which will make boot panic. According to Lu Hongjiu, the affected binutils are from 2.20.51.0.12 to 2.21.51.0.3, which are release since Oct 22 this year. At least ubuntu 10.10 is using such binutils. See: http://sourceware.org/bugzilla/show_bug.cgi?id=12327 The reason of the boot panic is that we have 'jiffies = jiffies_64;' in vmlinux.lds.S. The jiffies isn't in any section. In kernel build, there is warning saying jiffies is an absolute address and can't be relocatable. At runtime, jiffies will have virtual address 0. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Lu Hongjiu<hongjiu.lu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1295312269.1949.725.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 January 2011, 08:05:33 UTC |
321051f | Takashi Iwai | 18 January 2011, 06:44:55 UTC | Merge branch 'fix/hda' into for-linus | 18 January 2011, 06:44:55 UTC |
cbbf50b | Vitaliy Kulikov | 14 January 2011, 23:21:13 UTC | ALSA: hda - Fix initialization for HP 2011 notebooks Fixes for HP 2011 notebooks: enable dock ports and disable BTL initialization in the driver. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 January 2011, 06:43:48 UTC |
0f0714c | Bankim Bhavsar | 17 January 2011, 14:23:21 UTC | ALSA: hda - Add support for VMware controller Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio Controller. [changed to use AZX_DRIVER_GENERIC by tiwai] Signed-off-by: Bankim Bhavsar <bbhavsar@vmware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 January 2011, 06:43:36 UTC |
ea73496 | Takashi Iwai | 17 January 2011, 10:29:34 UTC | ALSA: hda - consitify string arrays Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 January 2011, 06:43:17 UTC |
c66ddf3 | Raymond Yau | 17 January 2011, 10:19:03 UTC | ALSA: hda - Add add multi-streaming playback for AD1988 Attached a patch which add a new model to support multi-streaming playback for ad1988. playback another stereo stream through the front panel headphone on device 2 while playback through the speakers connected to rear panel on device 0 at the same time. Tested with ad1988a rev2 codec on asus P5B-V motherboard. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 January 2011, 06:43:05 UTC |
b89b12b | Al Viro | 17 January 2011, 02:42:32 UTC | autofs4: clean ->d_release() and autofs4_free_ino() up The latter is called only when both ino and dentry are about to be freed, so cleaning ->d_fsdata and ->dentry is pointless. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:29 UTC |
26e6c91 | Al Viro | 16 January 2011, 23:43:40 UTC | autofs4: split autofs4_init_ino() split init_ino into new_ino and clean_ino; the former is what used to be init_ino(NULL, sbi), the latter is for cases where we passed non-NULL ino. Lose unused arguments. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:28 UTC |
5a37db3 | Al Viro | 16 January 2011, 23:29:35 UTC | autofs4: mkdir and symlink always get a dentry that had passed lookup ... so ->d_fsdata will have been set up before we get there Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:28 UTC |
726a5e0 | Al Viro | 16 January 2011, 22:43:52 UTC | autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymore Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:28 UTC |
0bf71d4 | Al Viro | 16 January 2011, 22:39:15 UTC | autofs4: kill ->size in autofs_info It's used only to pass the length of symlink body to autofs4_get_inode() in autofs4_dir_symlink(). We can bloody well set inode->i_size in autofs4_dir_symlink() directly and be done with that. Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:28 UTC |
09f12c0 | Al Viro | 16 January 2011, 22:20:23 UTC | autofs4: pass mode to autofs4_get_inode() explicitly In all cases we'd set inf->mode to know value just before passing it to autofs4_get_inode(). That kills the need to store it in autofs_info and pass it to autofs_init_ino() Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:27 UTC |
14a2f00 | Al Viro | 16 January 2011, 22:13:33 UTC | autofs4: autofs4_mkroot() is not different from autofs4_init_ino() Kill it. Mind you, it's been an obfuscated call of autofs4_init_ino() ever since 2.3.99pre6-4... Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:27 UTC |
292c5ee | Al Viro | 17 January 2011, 05:47:38 UTC | autofs4: keep symlink body in inode->i_private gets rid of all ->free()/->u.symlink machinery in autofs; we simply keep symlink bodies in inode->i_private and free them in ->evict_inode(). Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:27 UTC |
c0bcc9d | Ian Kent | 18 January 2011, 04:06:15 UTC | autofs4 - fix debug print in autofs4_lookup() oz_mode isn't defined any more, use autofs4_oz_mode(sbi) instead. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:27 UTC |
8931221 | Ian Kent | 18 January 2011, 04:06:10 UTC | vfs - fix dentry ref count in do_lookup() There is a ref count problem in fs/namei.c:do_lookup(). When walking in ref-walk mode, if follow_managed() returns a fail we need to drop dentry and possibly vfsmount. Clean up properly, as we do in the other caller of follow_managed(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:26 UTC |
c14cc63 | Ian Kent | 18 January 2011, 04:06:04 UTC | autofs4 - fix get_next_positive_dentry() The initialization condition in fs/autofs4/expire.c:get_next_positive_dentry() appears to be incorrect. If prev == NULL I believe that root should be returned. Further down, at the current dentry check for it being simple_positive() it looks like the d_lock for dentry p should be dropped instead of dentry ret, otherwise when p is assinged to ret we end up with no lock on p and a lost lock on ret, which leads to a deadlock. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 January 2011, 06:21:26 UTC |
fbcb44d | Jassi Brar | 18 January 2011, 05:41:43 UTC | ARM: S5PV310: Add missing virtual ASoC DMA device Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 18 January 2011, 05:47:07 UTC |
b9368f3 | Jassi Brar | 30 December 2010, 00:13:23 UTC | ARM: S5PV210: Add missing virtual ASoC DMA device Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 18 January 2011, 05:45:33 UTC |
be370ad | Jassi Brar | 30 December 2010, 00:12:32 UTC | ARM: S5P6450: Add missing virtual ASoC DMA device Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 18 January 2011, 05:44:32 UTC |
8418f88 | Jassi Brar | 30 December 2010, 00:11:10 UTC | ARM: S5P6440: Add missing virtual ASoC DMA device Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 18 January 2011, 05:44:32 UTC |
2fe4f0c | Jassi Brar | 21 December 2010, 00:44:33 UTC | ARM: S5P6442: Enable I2S device to work on SMDK6442 Add missing virtual ASoC DMA device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 18 January 2011, 05:44:32 UTC |
e6f597a | Andres Salomon | 18 January 2011, 00:11:12 UTC | staging: fix build failure in bcm driver While building latest Linus git, I hit the following: CC [M] drivers/staging/bcm/Qos.o drivers/staging/bcm/Qos.c: In function ‘PruneQueue’: drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’: drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ make[5]: *** [drivers/staging/bcm/Qos.o] Error 1 make[4]: *** [drivers/staging/bcm] Error 2 make[3]: *** [drivers/staging] Error 2 As well as: CC [M] drivers/staging/bcm/Transmit.o drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’: drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’ drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’ make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1 tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13. This patch converts bcm to use net_device_stats instead of netdev_queue. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2011, 01:39:39 UTC |
6845a44 | Linus Torvalds | 17 January 2011, 22:45:48 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long) | 17 January 2011, 22:45:48 UTC |
eee2a81 | Linus Torvalds | 17 January 2011, 22:43:43 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) Btrfs: forced readonly mounts on errors btrfs: Require CAP_SYS_ADMIN for filesystem rebalance Btrfs: don't warn if we get ENOSPC in btrfs_block_rsv_check btrfs: Fix memory leak in btrfs_read_fs_root_no_radix() btrfs: check NULL or not btrfs: Don't pass NULL ptr to func that may deref it. btrfs: mount failure return value fix btrfs: Mem leak in btrfs_get_acl() btrfs: fix wrong free space information of btrfs btrfs: make the chunk allocator utilize the devices better btrfs: restructure find_free_dev_extent() btrfs: fix wrong calculation of stripe size btrfs: try to reclaim some space when chunk allocation fails btrfs: fix wrong data space statistics fs/btrfs: Fix build of ctree Btrfs: fix off by one while setting block groups readonly Btrfs: Add BTRFS_IOC_SUBVOL_GETFLAGS/SETFLAGS ioctls Btrfs: Add readonly snapshots support Btrfs: Refactor btrfs_ioctl_snap_create() btrfs: Extract duplicate decompress code ... | 17 January 2011, 22:43:43 UTC |
83896fb | Linus Torvalds | 17 January 2011, 22:42:34 UTC | Revert "mm: simplify code of swap.c" This reverts commit d8505dee1a87b8d41b9c4ee1325cd72258226fbc. Chris Mason ended up chasing down some page allocation errors and pages stuck waiting on the IO scheduler, and was able to narrow it down to two commits: commit 744ed1442757 ("mm: batch activate_page() to reduce lock contention") and d8505dee1a87 ("mm: simplify code of swap.c"). This reverts the second one. Reported-and-debugged-by: Chris Mason <chris.mason@oracle.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: linux-mm <linux-mm@kvack.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 January 2011, 22:42:34 UTC |